From: Matthias Schiffer Date: Thu, 4 May 2017 05:29:58 +0000 (+0200) Subject: sunxi: sysupgrade: don't write partitions twice X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=6bb7b873158853efe31d760e18667d3ff8343291;p=openwrt%2Fstaging%2Flynxis.git sunxi: sysupgrade: don't write partitions twice When existing partitions are retained, the dd call writing the uboot image in the space before the first partition was accidentally writing the whole image, making the code for individual partitions redundant. Limit the copy to 1016KiB (the first 8KiB are skipped, and the first partition starts at 1024KiB). In addition, conv=notrunc is replaced with conv=fsync. It seems this was an oversight, as notrunc doesn't make sense for block devices and all other dd commands use conv=fsync. Signed-off-by: Matthias Schiffer --- diff --git a/target/linux/sunxi/base-files/lib/upgrade/platform.sh b/target/linux/sunxi/base-files/lib/upgrade/platform.sh index f2cd970d42..776bdf53bf 100644 --- a/target/linux/sunxi/base-files/lib/upgrade/platform.sh +++ b/target/linux/sunxi/base-files/lib/upgrade/platform.sh @@ -43,7 +43,7 @@ platform_do_upgrade() { fi #write uboot image - get_image "$@" | dd of="$diskdev" bs=1024 skip=8 seek=8 conv=notrunc + get_image "$@" | dd of="$diskdev" bs=1024 skip=8 seek=8 count=1016 conv=fsync #iterate over each partition from the image and write it to the boot disk while read part start size; do part="$(($part - 2))"