From: Hauke Mehrtens Date: Sun, 12 Feb 2017 22:48:11 +0000 (+0100) Subject: lantiq: update spi driver to upstream version X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=6c1657623fd25e6ccc21d3a3ac628fba0307d611;p=openwrt%2Fstaging%2Fdangole.git lantiq: update spi driver to upstream version These patches are backported from upstream Linux kernel. Signed-off-by: Hauke Mehrtens --- diff --git a/target/linux/lantiq/dts/falcon.dtsi b/target/linux/lantiq/dts/falcon.dtsi index 30025e0dc2..98f71819a2 100644 --- a/target/linux/lantiq/dts/falcon.dtsi +++ b/target/linux/lantiq/dts/falcon.dtsi @@ -166,7 +166,7 @@ spi: spi@100D00 { status = "disabled"; - compatible = "intel,falcon-spi", "intel,xrx100-spi", "lantiq,spi-lantiq-ssc"; + compatible = "lantiq,falcon-spi", "lantiq,xrx100-spi", "lantiq,spi-lantiq-ssc"; interrupts = <22 23 24 25>; interrupt-names = "spi_tx", "spi_rx", "spi_err", "spi_frm"; #address-cells = <1>; diff --git a/target/linux/lantiq/patches-4.9/0090-spi-add-transfer_status-callback.patch b/target/linux/lantiq/patches-4.9/0090-spi-add-transfer_status-callback.patch deleted file mode 100644 index de50e228b2..0000000000 --- a/target/linux/lantiq/patches-4.9/0090-spi-add-transfer_status-callback.patch +++ /dev/null @@ -1,42 +0,0 @@ ---- a/drivers/spi/spi.c -+++ b/drivers/spi/spi.c -@@ -1013,6 +1013,20 @@ static int spi_transfer_one_message(stru - msecs_to_jiffies(ms)); - } - -+ if (master->transfer_status) { -+ ret = master->transfer_status(master, ms); -+ if (ret) { -+ SPI_STATISTICS_INCREMENT_FIELD(statm, -+ errors); -+ SPI_STATISTICS_INCREMENT_FIELD(stats, -+ errors); -+ dev_err(&msg->spi->dev, -+ "SPI transfer status: %d\n", -+ ret); -+ goto out; -+ } -+ } -+ - if (ms == 0) { - SPI_STATISTICS_INCREMENT_FIELD(statm, - timedout); ---- a/include/linux/spi/spi.h -+++ b/include/linux/spi/spi.h -@@ -370,6 +370,8 @@ static inline void spi_unregister_driver - * transfer_one_message are mutually exclusive; when both - * are set, the generic subsystem does not call your - * transfer_one callback. -+ * @transfer_status: This callback allows the driver to return an error code -+ * in case the scheduled single spi transfer failed. - * @handle_err: the subsystem calls the driver to handle an error that occurs - * in the generic implementation of transfer_one_message(). - * @unprepare_message: undo any work done by prepare_message(). -@@ -546,6 +548,7 @@ struct spi_master { - void (*set_cs)(struct spi_device *spi, bool enable); - int (*transfer_one)(struct spi_master *master, struct spi_device *spi, - struct spi_transfer *transfer); -+ int (*transfer_status)(struct spi_master *master, unsigned long timeout); - void (*handle_err)(struct spi_master *master, - struct spi_message *message); - diff --git a/target/linux/lantiq/patches-4.9/0090-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-contro.patch b/target/linux/lantiq/patches-4.9/0090-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-contro.patch new file mode 100644 index 0000000000..da48ae3a18 --- /dev/null +++ b/target/linux/lantiq/patches-4.9/0090-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-contro.patch @@ -0,0 +1,1078 @@ +From 941ab0bc001fe24e5f8ce88eed27f2a1b89f3e20 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Tue, 14 Feb 2017 00:31:11 +0100 +Subject: spi: lantiq-ssc: add support for Lantiq SSC SPI controller + +This driver supports the Lantiq SSC SPI controller in master +mode. This controller is found on Intel (former Lantiq) SoCs like +the Danube, Falcon, xRX200, xRX300. + +The hardware uses two hardware FIFOs one for received and one for +transferred bytes. When the driver writes data into the transmit FIFO +the complete word is taken from the FIFO into a shift register. The +data from this shift register is then written to the wire. This driver +uses the interrupts signaling the status of the FIFOs and not the shift +register. It is also possible to use the interrupts for the shift +register, but they will send a signal after every word. When using the +interrupts for the shift register we get a signal when the last word is +written into the shift register and not when it is written to the wire. +After all FIFOs are empty the driver busy waits till the hardware is +not busy any more and returns the transfer status. + +Signed-off-by: Daniel Schwierzeck +Signed-off-by: Hauke Mehrtens +Signed-off-by: Mark Brown +--- + .../devicetree/bindings/spi/spi-lantiq-ssc.txt | 29 + + drivers/spi/Kconfig | 8 + + drivers/spi/Makefile | 1 + + drivers/spi/spi-lantiq-ssc.c | 983 +++++++++++++++++++++ + 4 files changed, 1021 insertions(+) + create mode 100644 Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt + create mode 100644 drivers/spi/spi-lantiq-ssc.c + +--- /dev/null ++++ b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt +@@ -0,0 +1,29 @@ ++Lantiq Synchronous Serial Controller (SSC) SPI master driver ++ ++Required properties: ++- compatible: "lantiq,ase-spi", "lantiq,falcon-spi", "lantiq,xrx100-spi" ++- #address-cells: see spi-bus.txt ++- #size-cells: see spi-bus.txt ++- reg: address and length of the spi master registers ++- interrupts: should contain the "spi_rx", "spi_tx" and "spi_err" interrupt. ++ ++ ++Optional properties: ++- clocks: spi clock phandle ++- num-cs: see spi-bus.txt, set to 8 if unset ++- base-cs: the number of the first chip select, set to 1 if unset. ++ ++Example: ++ ++ ++spi: spi@E100800 { ++ compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi"; ++ reg = <0xE100800 0x100>; ++ interrupt-parent = <&icu0>; ++ interrupts = <22 23 24>; ++ interrupt-names = "spi_rx", "spi_tx", "spi_err"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ num-cs = <6>; ++ base-cs = <1>; ++}; +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -403,6 +403,14 @@ config SPI_NUC900 + help + SPI driver for Nuvoton NUC900 series ARM SoCs + ++config SPI_LANTIQ_SSC ++ tristate "Lantiq SSC SPI controller" ++ depends on LANTIQ ++ help ++ This driver supports the Lantiq SSC SPI controller in master ++ mode. This controller is found on Intel (former Lantiq) SoCs like ++ the Danube, Falcon, xRX200, xRX300. ++ + config SPI_OC_TINY + tristate "OpenCores tiny SPI" + depends on GPIOLIB || COMPILE_TEST +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -47,6 +47,7 @@ obj-$(CONFIG_SPI_FSL_SPI) += spi-fsl-sp + obj-$(CONFIG_SPI_GPIO) += spi-gpio.o + obj-$(CONFIG_SPI_IMG_SPFI) += spi-img-spfi.o + obj-$(CONFIG_SPI_IMX) += spi-imx.o ++obj-$(CONFIG_SPI_LANTIQ_SSC) += spi-lantiq-ssc.o + obj-$(CONFIG_SPI_JCORE) += spi-jcore.o + obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o + obj-$(CONFIG_SPI_LP8841_RTC) += spi-lp8841-rtc.o +--- /dev/null ++++ b/drivers/spi/spi-lantiq-ssc.c +@@ -0,0 +1,983 @@ ++/* ++ * Copyright (C) 2011-2015 Daniel Schwierzeck ++ * Copyright (C) 2016 Hauke Mehrtens ++ * ++ * This program is free software; you can distribute it and/or modify it ++ * under the terms of the GNU General Public License (Version 2) as ++ * published by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#ifdef CONFIG_LANTIQ ++#include ++#endif ++ ++#define SPI_RX_IRQ_NAME "spi_rx" ++#define SPI_TX_IRQ_NAME "spi_tx" ++#define SPI_ERR_IRQ_NAME "spi_err" ++#define SPI_FRM_IRQ_NAME "spi_frm" ++ ++#define SPI_CLC 0x00 ++#define SPI_PISEL 0x04 ++#define SPI_ID 0x08 ++#define SPI_CON 0x10 ++#define SPI_STAT 0x14 ++#define SPI_WHBSTATE 0x18 ++#define SPI_TB 0x20 ++#define SPI_RB 0x24 ++#define SPI_RXFCON 0x30 ++#define SPI_TXFCON 0x34 ++#define SPI_FSTAT 0x38 ++#define SPI_BRT 0x40 ++#define SPI_BRSTAT 0x44 ++#define SPI_SFCON 0x60 ++#define SPI_SFSTAT 0x64 ++#define SPI_GPOCON 0x70 ++#define SPI_GPOSTAT 0x74 ++#define SPI_FPGO 0x78 ++#define SPI_RXREQ 0x80 ++#define SPI_RXCNT 0x84 ++#define SPI_DMACON 0xec ++#define SPI_IRNEN 0xf4 ++#define SPI_IRNICR 0xf8 ++#define SPI_IRNCR 0xfc ++ ++#define SPI_CLC_SMC_S 16 /* Clock divider for sleep mode */ ++#define SPI_CLC_SMC_M (0xFF << SPI_CLC_SMC_S) ++#define SPI_CLC_RMC_S 8 /* Clock divider for normal run mode */ ++#define SPI_CLC_RMC_M (0xFF << SPI_CLC_RMC_S) ++#define SPI_CLC_DISS BIT(1) /* Disable status bit */ ++#define SPI_CLC_DISR BIT(0) /* Disable request bit */ ++ ++#define SPI_ID_TXFS_S 24 /* Implemented TX FIFO size */ ++#define SPI_ID_TXFS_M (0x3F << SPI_ID_TXFS_S) ++#define SPI_ID_RXFS_S 16 /* Implemented RX FIFO size */ ++#define SPI_ID_RXFS_M (0x3F << SPI_ID_RXFS_S) ++#define SPI_ID_MOD_S 8 /* Module ID */ ++#define SPI_ID_MOD_M (0xff << SPI_ID_MOD_S) ++#define SPI_ID_CFG_S 5 /* DMA interface support */ ++#define SPI_ID_CFG_M (1 << SPI_ID_CFG_S) ++#define SPI_ID_REV_M 0x1F /* Hardware revision number */ ++ ++#define SPI_CON_BM_S 16 /* Data width selection */ ++#define SPI_CON_BM_M (0x1F << SPI_CON_BM_S) ++#define SPI_CON_EM BIT(24) /* Echo mode */ ++#define SPI_CON_IDLE BIT(23) /* Idle bit value */ ++#define SPI_CON_ENBV BIT(22) /* Enable byte valid control */ ++#define SPI_CON_RUEN BIT(12) /* Receive underflow error enable */ ++#define SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */ ++#define SPI_CON_AEN BIT(10) /* Abort error enable */ ++#define SPI_CON_REN BIT(9) /* Receive overflow error enable */ ++#define SPI_CON_TEN BIT(8) /* Transmit overflow error enable */ ++#define SPI_CON_LB BIT(7) /* Loopback control */ ++#define SPI_CON_PO BIT(6) /* Clock polarity control */ ++#define SPI_CON_PH BIT(5) /* Clock phase control */ ++#define SPI_CON_HB BIT(4) /* Heading control */ ++#define SPI_CON_RXOFF BIT(1) /* Switch receiver off */ ++#define SPI_CON_TXOFF BIT(0) /* Switch transmitter off */ ++ ++#define SPI_STAT_RXBV_S 28 ++#define SPI_STAT_RXBV_M (0x7 << SPI_STAT_RXBV_S) ++#define SPI_STAT_BSY BIT(13) /* Busy flag */ ++#define SPI_STAT_RUE BIT(12) /* Receive underflow error flag */ ++#define SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */ ++#define SPI_STAT_AE BIT(10) /* Abort error flag */ ++#define SPI_STAT_RE BIT(9) /* Receive error flag */ ++#define SPI_STAT_TE BIT(8) /* Transmit error flag */ ++#define SPI_STAT_ME BIT(7) /* Mode error flag */ ++#define SPI_STAT_MS BIT(1) /* Master/slave select bit */ ++#define SPI_STAT_EN BIT(0) /* Enable bit */ ++#define SPI_STAT_ERRORS (SPI_STAT_ME | SPI_STAT_TE | SPI_STAT_RE | \ ++ SPI_STAT_AE | SPI_STAT_TUE | SPI_STAT_RUE) ++ ++#define SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */ ++#define SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */ ++#define SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */ ++#define SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */ ++#define SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */ ++#define SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */ ++#define SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */ ++#define SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */ ++#define SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */ ++#define SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */ ++#define SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */ ++#define SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */ ++#define SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */ ++#define SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */ ++#define SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */ ++#define SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */ ++#define SPI_WHBSTATE_CLR_ERRORS (SPI_WHBSTATE_CLRRUE | SPI_WHBSTATE_CLRME | \ ++ SPI_WHBSTATE_CLRTE | SPI_WHBSTATE_CLRRE | \ ++ SPI_WHBSTATE_CLRAE | SPI_WHBSTATE_CLRTUE) ++ ++#define SPI_RXFCON_RXFITL_S 8 /* FIFO interrupt trigger level */ ++#define SPI_RXFCON_RXFITL_M (0x3F << SPI_RXFCON_RXFITL_S) ++#define SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */ ++#define SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */ ++ ++#define SPI_TXFCON_TXFITL_S 8 /* FIFO interrupt trigger level */ ++#define SPI_TXFCON_TXFITL_M (0x3F << SPI_TXFCON_TXFITL_S) ++#define SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */ ++#define SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */ ++ ++#define SPI_FSTAT_RXFFL_S 0 ++#define SPI_FSTAT_RXFFL_M (0x3f << SPI_FSTAT_RXFFL_S) ++#define SPI_FSTAT_TXFFL_S 8 ++#define SPI_FSTAT_TXFFL_M (0x3f << SPI_FSTAT_TXFFL_S) ++ ++#define SPI_GPOCON_ISCSBN_S 8 ++#define SPI_GPOCON_INVOUTN_S 0 ++ ++#define SPI_FGPO_SETOUTN_S 8 ++#define SPI_FGPO_CLROUTN_S 0 ++ ++#define SPI_RXREQ_RXCNT_M 0xFFFF /* Receive count value */ ++#define SPI_RXCNT_TODO_M 0xFFFF /* Recevie to-do value */ ++ ++#define SPI_IRNEN_TFI BIT(4) /* TX finished interrupt */ ++#define SPI_IRNEN_F BIT(3) /* Frame end interrupt request */ ++#define SPI_IRNEN_E BIT(2) /* Error end interrupt request */ ++#define SPI_IRNEN_T_XWAY BIT(1) /* Transmit end interrupt request */ ++#define SPI_IRNEN_R_XWAY BIT(0) /* Receive end interrupt request */ ++#define SPI_IRNEN_R_XRX BIT(1) /* Transmit end interrupt request */ ++#define SPI_IRNEN_T_XRX BIT(0) /* Receive end interrupt request */ ++#define SPI_IRNEN_ALL 0x1F ++ ++struct lantiq_ssc_hwcfg { ++ unsigned int irnen_r; ++ unsigned int irnen_t; ++}; ++ ++struct lantiq_ssc_spi { ++ struct spi_master *master; ++ struct device *dev; ++ void __iomem *regbase; ++ struct clk *spi_clk; ++ struct clk *fpi_clk; ++ const struct lantiq_ssc_hwcfg *hwcfg; ++ ++ spinlock_t lock; ++ struct workqueue_struct *wq; ++ struct work_struct work; ++ ++ const u8 *tx; ++ u8 *rx; ++ unsigned int tx_todo; ++ unsigned int rx_todo; ++ unsigned int bits_per_word; ++ unsigned int speed_hz; ++ unsigned int tx_fifo_size; ++ unsigned int rx_fifo_size; ++ unsigned int base_cs; ++}; ++ ++static u32 lantiq_ssc_readl(const struct lantiq_ssc_spi *spi, u32 reg) ++{ ++ return __raw_readl(spi->regbase + reg); ++} ++ ++static void lantiq_ssc_writel(const struct lantiq_ssc_spi *spi, u32 val, ++ u32 reg) ++{ ++ __raw_writel(val, spi->regbase + reg); ++} ++ ++static void lantiq_ssc_maskl(const struct lantiq_ssc_spi *spi, u32 clr, ++ u32 set, u32 reg) ++{ ++ u32 val = __raw_readl(spi->regbase + reg); ++ ++ val &= ~clr; ++ val |= set; ++ __raw_writel(val, spi->regbase + reg); ++} ++ ++static unsigned int tx_fifo_level(const struct lantiq_ssc_spi *spi) ++{ ++ u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT); ++ ++ return (fstat & SPI_FSTAT_TXFFL_M) >> SPI_FSTAT_TXFFL_S; ++} ++ ++static unsigned int rx_fifo_level(const struct lantiq_ssc_spi *spi) ++{ ++ u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT); ++ ++ return fstat & SPI_FSTAT_RXFFL_M; ++} ++ ++static unsigned int tx_fifo_free(const struct lantiq_ssc_spi *spi) ++{ ++ return spi->tx_fifo_size - tx_fifo_level(spi); ++} ++ ++static void rx_fifo_reset(const struct lantiq_ssc_spi *spi) ++{ ++ u32 val = spi->rx_fifo_size << SPI_RXFCON_RXFITL_S; ++ ++ val |= SPI_RXFCON_RXFEN | SPI_RXFCON_RXFLU; ++ lantiq_ssc_writel(spi, val, SPI_RXFCON); ++} ++ ++static void tx_fifo_reset(const struct lantiq_ssc_spi *spi) ++{ ++ u32 val = 1 << SPI_TXFCON_TXFITL_S; ++ ++ val |= SPI_TXFCON_TXFEN | SPI_TXFCON_TXFLU; ++ lantiq_ssc_writel(spi, val, SPI_TXFCON); ++} ++ ++static void rx_fifo_flush(const struct lantiq_ssc_spi *spi) ++{ ++ lantiq_ssc_maskl(spi, 0, SPI_RXFCON_RXFLU, SPI_RXFCON); ++} ++ ++static void tx_fifo_flush(const struct lantiq_ssc_spi *spi) ++{ ++ lantiq_ssc_maskl(spi, 0, SPI_TXFCON_TXFLU, SPI_TXFCON); ++} ++ ++static void hw_enter_config_mode(const struct lantiq_ssc_spi *spi) ++{ ++ lantiq_ssc_writel(spi, SPI_WHBSTATE_CLREN, SPI_WHBSTATE); ++} ++ ++static void hw_enter_active_mode(const struct lantiq_ssc_spi *spi) ++{ ++ lantiq_ssc_writel(spi, SPI_WHBSTATE_SETEN, SPI_WHBSTATE); ++} ++ ++static void hw_setup_speed_hz(const struct lantiq_ssc_spi *spi, ++ unsigned int max_speed_hz) ++{ ++ u32 spi_clk, brt; ++ ++ /* ++ * SPI module clock is derived from FPI bus clock dependent on ++ * divider value in CLC.RMS which is always set to 1. ++ * ++ * f_SPI ++ * baudrate = -------------- ++ * 2 * (BR + 1) ++ */ ++ spi_clk = clk_get_rate(spi->fpi_clk) / 2; ++ ++ if (max_speed_hz > spi_clk) ++ brt = 0; ++ else ++ brt = spi_clk / max_speed_hz - 1; ++ ++ if (brt > 0xFFFF) ++ brt = 0xFFFF; ++ ++ dev_dbg(spi->dev, "spi_clk %u, max_speed_hz %u, brt %u\n", ++ spi_clk, max_speed_hz, brt); ++ ++ lantiq_ssc_writel(spi, brt, SPI_BRT); ++} ++ ++static void hw_setup_bits_per_word(const struct lantiq_ssc_spi *spi, ++ unsigned int bits_per_word) ++{ ++ u32 bm; ++ ++ /* CON.BM value = bits_per_word - 1 */ ++ bm = (bits_per_word - 1) << SPI_CON_BM_S; ++ ++ lantiq_ssc_maskl(spi, SPI_CON_BM_M, bm, SPI_CON); ++} ++ ++static void hw_setup_clock_mode(const struct lantiq_ssc_spi *spi, ++ unsigned int mode) ++{ ++ u32 con_set = 0, con_clr = 0; ++ ++ /* ++ * SPI mode mapping in CON register: ++ * Mode CPOL CPHA CON.PO CON.PH ++ * 0 0 0 0 1 ++ * 1 0 1 0 0 ++ * 2 1 0 1 1 ++ * 3 1 1 1 0 ++ */ ++ if (mode & SPI_CPHA) ++ con_clr |= SPI_CON_PH; ++ else ++ con_set |= SPI_CON_PH; ++ ++ if (mode & SPI_CPOL) ++ con_set |= SPI_CON_PO | SPI_CON_IDLE; ++ else ++ con_clr |= SPI_CON_PO | SPI_CON_IDLE; ++ ++ /* Set heading control */ ++ if (mode & SPI_LSB_FIRST) ++ con_clr |= SPI_CON_HB; ++ else ++ con_set |= SPI_CON_HB; ++ ++ /* Set loopback mode */ ++ if (mode & SPI_LOOP) ++ con_set |= SPI_CON_LB; ++ else ++ con_clr |= SPI_CON_LB; ++ ++ lantiq_ssc_maskl(spi, con_clr, con_set, SPI_CON); ++} ++ ++static void lantiq_ssc_hw_init(const struct lantiq_ssc_spi *spi) ++{ ++ const struct lantiq_ssc_hwcfg *hwcfg = spi->hwcfg; ++ ++ /* ++ * Set clock divider for run mode to 1 to ++ * run at same frequency as FPI bus ++ */ ++ lantiq_ssc_writel(spi, 1 << SPI_CLC_RMC_S, SPI_CLC); ++ ++ /* Put controller into config mode */ ++ hw_enter_config_mode(spi); ++ ++ /* Clear error flags */ ++ lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE); ++ ++ /* Enable error checking, disable TX/RX */ ++ lantiq_ssc_writel(spi, SPI_CON_RUEN | SPI_CON_AEN | SPI_CON_TEN | ++ SPI_CON_REN | SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON); ++ ++ /* Setup default SPI mode */ ++ hw_setup_bits_per_word(spi, spi->bits_per_word); ++ hw_setup_clock_mode(spi, SPI_MODE_0); ++ ++ /* Enable master mode and clear error flags */ ++ lantiq_ssc_writel(spi, SPI_WHBSTATE_SETMS | SPI_WHBSTATE_CLR_ERRORS, ++ SPI_WHBSTATE); ++ ++ /* Reset GPIO/CS registers */ ++ lantiq_ssc_writel(spi, 0, SPI_GPOCON); ++ lantiq_ssc_writel(spi, 0xFF00, SPI_FPGO); ++ ++ /* Enable and flush FIFOs */ ++ rx_fifo_reset(spi); ++ tx_fifo_reset(spi); ++ ++ /* Enable interrupts */ ++ lantiq_ssc_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r | SPI_IRNEN_E, ++ SPI_IRNEN); ++} ++ ++static int lantiq_ssc_setup(struct spi_device *spidev) ++{ ++ struct spi_master *master = spidev->master; ++ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master); ++ unsigned int cs = spidev->chip_select; ++ u32 gpocon; ++ ++ /* GPIOs are used for CS */ ++ if (gpio_is_valid(spidev->cs_gpio)) ++ return 0; ++ ++ dev_dbg(spi->dev, "using internal chipselect %u\n", cs); ++ ++ if (cs < spi->base_cs) { ++ dev_err(spi->dev, ++ "chipselect %i too small (min %i)\n", cs, spi->base_cs); ++ return -EINVAL; ++ } ++ ++ /* set GPO pin to CS mode */ ++ gpocon = 1 << ((cs - spi->base_cs) + SPI_GPOCON_ISCSBN_S); ++ ++ /* invert GPO pin */ ++ if (spidev->mode & SPI_CS_HIGH) ++ gpocon |= 1 << (cs - spi->base_cs); ++ ++ lantiq_ssc_maskl(spi, 0, gpocon, SPI_GPOCON); ++ ++ return 0; ++} ++ ++static int lantiq_ssc_prepare_message(struct spi_master *master, ++ struct spi_message *message) ++{ ++ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master); ++ ++ hw_enter_config_mode(spi); ++ hw_setup_clock_mode(spi, message->spi->mode); ++ hw_enter_active_mode(spi); ++ ++ return 0; ++} ++ ++static void hw_setup_transfer(struct lantiq_ssc_spi *spi, ++ struct spi_device *spidev, struct spi_transfer *t) ++{ ++ unsigned int speed_hz = t->speed_hz; ++ unsigned int bits_per_word = t->bits_per_word; ++ u32 con; ++ ++ if (bits_per_word != spi->bits_per_word || ++ speed_hz != spi->speed_hz) { ++ hw_enter_config_mode(spi); ++ hw_setup_speed_hz(spi, speed_hz); ++ hw_setup_bits_per_word(spi, bits_per_word); ++ hw_enter_active_mode(spi); ++ ++ spi->speed_hz = speed_hz; ++ spi->bits_per_word = bits_per_word; ++ } ++ ++ /* Configure transmitter and receiver */ ++ con = lantiq_ssc_readl(spi, SPI_CON); ++ if (t->tx_buf) ++ con &= ~SPI_CON_TXOFF; ++ else ++ con |= SPI_CON_TXOFF; ++ ++ if (t->rx_buf) ++ con &= ~SPI_CON_RXOFF; ++ else ++ con |= SPI_CON_RXOFF; ++ ++ lantiq_ssc_writel(spi, con, SPI_CON); ++} ++ ++static int lantiq_ssc_unprepare_message(struct spi_master *master, ++ struct spi_message *message) ++{ ++ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master); ++ ++ flush_workqueue(spi->wq); ++ ++ /* Disable transmitter and receiver while idle */ ++ lantiq_ssc_maskl(spi, 0, SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON); ++ ++ return 0; ++} ++ ++static void tx_fifo_write(struct lantiq_ssc_spi *spi) ++{ ++ const u8 *tx8; ++ const u16 *tx16; ++ const u32 *tx32; ++ u32 data; ++ unsigned int tx_free = tx_fifo_free(spi); ++ ++ while (spi->tx_todo && tx_free) { ++ switch (spi->bits_per_word) { ++ case 2 ... 8: ++ tx8 = spi->tx; ++ data = *tx8; ++ spi->tx_todo--; ++ spi->tx++; ++ break; ++ case 16: ++ tx16 = (u16 *) spi->tx; ++ data = *tx16; ++ spi->tx_todo -= 2; ++ spi->tx += 2; ++ break; ++ case 32: ++ tx32 = (u32 *) spi->tx; ++ data = *tx32; ++ spi->tx_todo -= 4; ++ spi->tx += 4; ++ break; ++ default: ++ WARN_ON(1); ++ data = 0; ++ break; ++ } ++ ++ lantiq_ssc_writel(spi, data, SPI_TB); ++ tx_free--; ++ } ++} ++ ++static void rx_fifo_read_full_duplex(struct lantiq_ssc_spi *spi) ++{ ++ u8 *rx8; ++ u16 *rx16; ++ u32 *rx32; ++ u32 data; ++ unsigned int rx_fill = rx_fifo_level(spi); ++ ++ while (rx_fill) { ++ data = lantiq_ssc_readl(spi, SPI_RB); ++ ++ switch (spi->bits_per_word) { ++ case 2 ... 8: ++ rx8 = spi->rx; ++ *rx8 = data; ++ spi->rx_todo--; ++ spi->rx++; ++ break; ++ case 16: ++ rx16 = (u16 *) spi->rx; ++ *rx16 = data; ++ spi->rx_todo -= 2; ++ spi->rx += 2; ++ break; ++ case 32: ++ rx32 = (u32 *) spi->rx; ++ *rx32 = data; ++ spi->rx_todo -= 4; ++ spi->rx += 4; ++ break; ++ default: ++ WARN_ON(1); ++ break; ++ } ++ ++ rx_fill--; ++ } ++} ++ ++static void rx_fifo_read_half_duplex(struct lantiq_ssc_spi *spi) ++{ ++ u32 data, *rx32; ++ u8 *rx8; ++ unsigned int rxbv, shift; ++ unsigned int rx_fill = rx_fifo_level(spi); ++ ++ /* ++ * In RX-only mode the bits per word value is ignored by HW. A value ++ * of 32 is used instead. Thus all 4 bytes per FIFO must be read. ++ * If remaining RX bytes are less than 4, the FIFO must be read ++ * differently. The amount of received and valid bytes is indicated ++ * by STAT.RXBV register value. ++ */ ++ while (rx_fill) { ++ if (spi->rx_todo < 4) { ++ rxbv = (lantiq_ssc_readl(spi, SPI_STAT) & ++ SPI_STAT_RXBV_M) >> SPI_STAT_RXBV_S; ++ data = lantiq_ssc_readl(spi, SPI_RB); ++ ++ shift = (rxbv - 1) * 8; ++ rx8 = spi->rx; ++ ++ while (rxbv) { ++ *rx8++ = (data >> shift) & 0xFF; ++ rxbv--; ++ shift -= 8; ++ spi->rx_todo--; ++ spi->rx++; ++ } ++ } else { ++ data = lantiq_ssc_readl(spi, SPI_RB); ++ rx32 = (u32 *) spi->rx; ++ ++ *rx32++ = data; ++ spi->rx_todo -= 4; ++ spi->rx += 4; ++ } ++ rx_fill--; ++ } ++} ++ ++static void rx_request(struct lantiq_ssc_spi *spi) ++{ ++ unsigned int rxreq, rxreq_max; ++ ++ /* ++ * To avoid receive overflows at high clocks it is better to request ++ * only the amount of bytes that fits into all FIFOs. This value ++ * depends on the FIFO size implemented in hardware. ++ */ ++ rxreq = spi->rx_todo; ++ rxreq_max = spi->rx_fifo_size * 4; ++ if (rxreq > rxreq_max) ++ rxreq = rxreq_max; ++ ++ lantiq_ssc_writel(spi, rxreq, SPI_RXREQ); ++} ++ ++static irqreturn_t lantiq_ssc_xmit_interrupt(int irq, void *data) ++{ ++ struct lantiq_ssc_spi *spi = data; ++ ++ if (spi->tx) { ++ if (spi->rx && spi->rx_todo) ++ rx_fifo_read_full_duplex(spi); ++ ++ if (spi->tx_todo) ++ tx_fifo_write(spi); ++ else if (!tx_fifo_level(spi)) ++ goto completed; ++ } else if (spi->rx) { ++ if (spi->rx_todo) { ++ rx_fifo_read_half_duplex(spi); ++ ++ if (spi->rx_todo) ++ rx_request(spi); ++ else ++ goto completed; ++ } else { ++ goto completed; ++ } ++ } ++ ++ return IRQ_HANDLED; ++ ++completed: ++ queue_work(spi->wq, &spi->work); ++ ++ return IRQ_HANDLED; ++} ++ ++static irqreturn_t lantiq_ssc_err_interrupt(int irq, void *data) ++{ ++ struct lantiq_ssc_spi *spi = data; ++ u32 stat = lantiq_ssc_readl(spi, SPI_STAT); ++ ++ if (!(stat & SPI_STAT_ERRORS)) ++ return IRQ_NONE; ++ ++ if (stat & SPI_STAT_RUE) ++ dev_err(spi->dev, "receive underflow error\n"); ++ if (stat & SPI_STAT_TUE) ++ dev_err(spi->dev, "transmit underflow error\n"); ++ if (stat & SPI_STAT_AE) ++ dev_err(spi->dev, "abort error\n"); ++ if (stat & SPI_STAT_RE) ++ dev_err(spi->dev, "receive overflow error\n"); ++ if (stat & SPI_STAT_TE) ++ dev_err(spi->dev, "transmit overflow error\n"); ++ if (stat & SPI_STAT_ME) ++ dev_err(spi->dev, "mode error\n"); ++ ++ /* Clear error flags */ ++ lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE); ++ ++ /* set bad status so it can be retried */ ++ if (spi->master->cur_msg) ++ spi->master->cur_msg->status = -EIO; ++ queue_work(spi->wq, &spi->work); ++ ++ return IRQ_HANDLED; ++} ++ ++static int transfer_start(struct lantiq_ssc_spi *spi, struct spi_device *spidev, ++ struct spi_transfer *t) ++{ ++ unsigned long flags; ++ ++ spin_lock_irqsave(&spi->lock, flags); ++ ++ spi->tx = t->tx_buf; ++ spi->rx = t->rx_buf; ++ ++ if (t->tx_buf) { ++ spi->tx_todo = t->len; ++ ++ /* initially fill TX FIFO */ ++ tx_fifo_write(spi); ++ } ++ ++ if (spi->rx) { ++ spi->rx_todo = t->len; ++ ++ /* start shift clock in RX-only mode */ ++ if (!spi->tx) ++ rx_request(spi); ++ } ++ ++ spin_unlock_irqrestore(&spi->lock, flags); ++ ++ return t->len; ++} ++ ++/* ++ * The driver only gets an interrupt when the FIFO is empty, but there ++ * is an additional shift register from which the data is written to ++ * the wire. We get the last interrupt when the controller starts to ++ * write the last word to the wire, not when it is finished. Do busy ++ * waiting till it finishes. ++ */ ++static void lantiq_ssc_bussy_work(struct work_struct *work) ++{ ++ struct lantiq_ssc_spi *spi; ++ unsigned long long timeout = 8LL * 1000LL; ++ unsigned long end; ++ ++ spi = container_of(work, typeof(*spi), work); ++ ++ do_div(timeout, spi->speed_hz); ++ timeout += timeout + 100; /* some tolerance */ ++ ++ end = jiffies + msecs_to_jiffies(timeout); ++ do { ++ u32 stat = lantiq_ssc_readl(spi, SPI_STAT); ++ ++ if (!(stat & SPI_STAT_BSY)) { ++ spi_finalize_current_transfer(spi->master); ++ return; ++ } ++ ++ cond_resched(); ++ } while (!time_after_eq(jiffies, end)); ++ ++ if (spi->master->cur_msg) ++ spi->master->cur_msg->status = -EIO; ++ spi_finalize_current_transfer(spi->master); ++} ++ ++static void lantiq_ssc_handle_err(struct spi_master *master, ++ struct spi_message *message) ++{ ++ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master); ++ ++ /* flush FIFOs on timeout */ ++ rx_fifo_flush(spi); ++ tx_fifo_flush(spi); ++} ++ ++static void lantiq_ssc_set_cs(struct spi_device *spidev, bool enable) ++{ ++ struct lantiq_ssc_spi *spi = spi_master_get_devdata(spidev->master); ++ unsigned int cs = spidev->chip_select; ++ u32 fgpo; ++ ++ if (!!(spidev->mode & SPI_CS_HIGH) == enable) ++ fgpo = (1 << (cs - spi->base_cs)); ++ else ++ fgpo = (1 << (cs - spi->base_cs + SPI_FGPO_SETOUTN_S)); ++ ++ lantiq_ssc_writel(spi, fgpo, SPI_FPGO); ++} ++ ++static int lantiq_ssc_transfer_one(struct spi_master *master, ++ struct spi_device *spidev, ++ struct spi_transfer *t) ++{ ++ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master); ++ ++ hw_setup_transfer(spi, spidev, t); ++ ++ return transfer_start(spi, spidev, t); ++} ++ ++static const struct lantiq_ssc_hwcfg lantiq_ssc_xway = { ++ .irnen_r = SPI_IRNEN_R_XWAY, ++ .irnen_t = SPI_IRNEN_T_XWAY, ++}; ++ ++static const struct lantiq_ssc_hwcfg lantiq_ssc_xrx = { ++ .irnen_r = SPI_IRNEN_R_XRX, ++ .irnen_t = SPI_IRNEN_T_XRX, ++}; ++ ++static const struct of_device_id lantiq_ssc_match[] = { ++ { .compatible = "lantiq,ase-spi", .data = &lantiq_ssc_xway, }, ++ { .compatible = "lantiq,falcon-spi", .data = &lantiq_ssc_xrx, }, ++ { .compatible = "lantiq,xrx100-spi", .data = &lantiq_ssc_xrx, }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, lantiq_ssc_match); ++ ++static int lantiq_ssc_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct spi_master *master; ++ struct resource *res; ++ struct lantiq_ssc_spi *spi; ++ const struct lantiq_ssc_hwcfg *hwcfg; ++ const struct of_device_id *match; ++ int err, rx_irq, tx_irq, err_irq; ++ u32 id, supports_dma, revision; ++ unsigned int num_cs; ++ ++ match = of_match_device(lantiq_ssc_match, dev); ++ if (!match) { ++ dev_err(dev, "no device match\n"); ++ return -EINVAL; ++ } ++ hwcfg = match->data; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) { ++ dev_err(dev, "failed to get resources\n"); ++ return -ENXIO; ++ } ++ ++ rx_irq = platform_get_irq_byname(pdev, SPI_RX_IRQ_NAME); ++ if (rx_irq < 0) { ++ dev_err(dev, "failed to get %s\n", SPI_RX_IRQ_NAME); ++ return -ENXIO; ++ } ++ ++ tx_irq = platform_get_irq_byname(pdev, SPI_TX_IRQ_NAME); ++ if (tx_irq < 0) { ++ dev_err(dev, "failed to get %s\n", SPI_TX_IRQ_NAME); ++ return -ENXIO; ++ } ++ ++ err_irq = platform_get_irq_byname(pdev, SPI_ERR_IRQ_NAME); ++ if (err_irq < 0) { ++ dev_err(dev, "failed to get %s\n", SPI_ERR_IRQ_NAME); ++ return -ENXIO; ++ } ++ ++ master = spi_alloc_master(dev, sizeof(struct lantiq_ssc_spi)); ++ if (!master) ++ return -ENOMEM; ++ ++ spi = spi_master_get_devdata(master); ++ spi->master = master; ++ spi->dev = dev; ++ spi->hwcfg = hwcfg; ++ platform_set_drvdata(pdev, spi); ++ ++ spi->regbase = devm_ioremap_resource(dev, res); ++ if (IS_ERR(spi->regbase)) { ++ err = PTR_ERR(spi->regbase); ++ goto err_master_put; ++ } ++ ++ err = devm_request_irq(dev, rx_irq, lantiq_ssc_xmit_interrupt, ++ 0, SPI_RX_IRQ_NAME, spi); ++ if (err) ++ goto err_master_put; ++ ++ err = devm_request_irq(dev, tx_irq, lantiq_ssc_xmit_interrupt, ++ 0, SPI_TX_IRQ_NAME, spi); ++ if (err) ++ goto err_master_put; ++ ++ err = devm_request_irq(dev, err_irq, lantiq_ssc_err_interrupt, ++ 0, SPI_ERR_IRQ_NAME, spi); ++ if (err) ++ goto err_master_put; ++ ++ spi->spi_clk = devm_clk_get(dev, "gate"); ++ if (IS_ERR(spi->spi_clk)) { ++ err = PTR_ERR(spi->spi_clk); ++ goto err_master_put; ++ } ++ err = clk_prepare_enable(spi->spi_clk); ++ if (err) ++ goto err_master_put; ++ ++ /* ++ * Use the old clk_get_fpi() function on Lantiq platform, till it ++ * supports common clk. ++ */ ++#if defined(CONFIG_LANTIQ) && !defined(CONFIG_COMMON_CLK) ++ spi->fpi_clk = clk_get_fpi(); ++#else ++ spi->fpi_clk = clk_get(dev, "freq"); ++#endif ++ if (IS_ERR(spi->fpi_clk)) { ++ err = PTR_ERR(spi->fpi_clk); ++ goto err_clk_disable; ++ } ++ ++ num_cs = 8; ++ of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs); ++ ++ spi->base_cs = 1; ++ of_property_read_u32(pdev->dev.of_node, "base-cs", &spi->base_cs); ++ ++ spin_lock_init(&spi->lock); ++ spi->bits_per_word = 8; ++ spi->speed_hz = 0; ++ ++ master->dev.of_node = pdev->dev.of_node; ++ master->num_chipselect = num_cs; ++ master->setup = lantiq_ssc_setup; ++ master->set_cs = lantiq_ssc_set_cs; ++ master->handle_err = lantiq_ssc_handle_err; ++ master->prepare_message = lantiq_ssc_prepare_message; ++ master->unprepare_message = lantiq_ssc_unprepare_message; ++ master->transfer_one = lantiq_ssc_transfer_one; ++ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH | ++ SPI_LOOP; ++ master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 8) | ++ SPI_BPW_MASK(16) | SPI_BPW_MASK(32); ++ ++ spi->wq = alloc_ordered_workqueue(dev_name(dev), 0); ++ if (!spi->wq) { ++ err = -ENOMEM; ++ goto err_clk_put; ++ } ++ INIT_WORK(&spi->work, lantiq_ssc_bussy_work); ++ ++ id = lantiq_ssc_readl(spi, SPI_ID); ++ spi->tx_fifo_size = (id & SPI_ID_TXFS_M) >> SPI_ID_TXFS_S; ++ spi->rx_fifo_size = (id & SPI_ID_RXFS_M) >> SPI_ID_RXFS_S; ++ supports_dma = (id & SPI_ID_CFG_M) >> SPI_ID_CFG_S; ++ revision = id & SPI_ID_REV_M; ++ ++ lantiq_ssc_hw_init(spi); ++ ++ dev_info(dev, ++ "Lantiq SSC SPI controller (Rev %i, TXFS %u, RXFS %u, DMA %u)\n", ++ revision, spi->tx_fifo_size, spi->rx_fifo_size, supports_dma); ++ ++ err = devm_spi_register_master(dev, master); ++ if (err) { ++ dev_err(dev, "failed to register spi_master\n"); ++ goto err_wq_destroy; ++ } ++ ++ return 0; ++ ++err_wq_destroy: ++ destroy_workqueue(spi->wq); ++err_clk_put: ++ clk_put(spi->fpi_clk); ++err_clk_disable: ++ clk_disable_unprepare(spi->spi_clk); ++err_master_put: ++ spi_master_put(master); ++ ++ return err; ++} ++ ++static int lantiq_ssc_remove(struct platform_device *pdev) ++{ ++ struct lantiq_ssc_spi *spi = platform_get_drvdata(pdev); ++ ++ lantiq_ssc_writel(spi, 0, SPI_IRNEN); ++ lantiq_ssc_writel(spi, 0, SPI_CLC); ++ rx_fifo_flush(spi); ++ tx_fifo_flush(spi); ++ hw_enter_config_mode(spi); ++ ++ destroy_workqueue(spi->wq); ++ clk_disable_unprepare(spi->spi_clk); ++ clk_put(spi->fpi_clk); ++ ++ return 0; ++} ++ ++static struct platform_driver lantiq_ssc_driver = { ++ .probe = lantiq_ssc_probe, ++ .remove = lantiq_ssc_remove, ++ .driver = { ++ .name = "spi-lantiq-ssc", ++ .owner = THIS_MODULE, ++ .of_match_table = lantiq_ssc_match, ++ }, ++}; ++module_platform_driver(lantiq_ssc_driver); ++ ++MODULE_DESCRIPTION("Lantiq SSC SPI controller driver"); ++MODULE_AUTHOR("Daniel Schwierzeck "); ++MODULE_AUTHOR("Hauke Mehrtens "); ++MODULE_LICENSE("GPL"); ++MODULE_ALIAS("platform:spi-lantiq-ssc"); diff --git a/target/linux/lantiq/patches-4.9/0091-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-controller.patch b/target/linux/lantiq/patches-4.9/0091-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-controller.patch deleted file mode 100644 index 4071dc1e06..0000000000 --- a/target/linux/lantiq/patches-4.9/0091-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-controller.patch +++ /dev/null @@ -1,1014 +0,0 @@ ---- /dev/null -+++ b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt -@@ -0,0 +1,29 @@ -+Lantiq Synchronous Serial Controller (SSC) SPI master driver -+ -+Required properties: -+- compatible: "lantiq,ase-spi", "lantiq,falcon-spi", "lantiq,xrx100-spi" -+- #address-cells: see spi-bus.txt -+- #size-cells: see spi-bus.txt -+- reg: address and length of the spi master registers -+- interrupts: should contain the "spi_rx", "spi_tx" and "spi_err" interrupt. -+ -+ -+Optional properties: -+- clocks: spi clock phandle -+- num-cs: see spi-bus.txt, set to 8 if unset -+- base-cs: the number of the first chip select, set to 1 if unset. -+ -+Example: -+ -+ -+spi: spi@E100800 { -+ compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi"; -+ reg = <0xE100800 0x100>; -+ interrupt-parent = <&icu0>; -+ interrupts = <22 23 24>; -+ interrupt-names = "spi_rx", "spi_tx", "spi_err"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ num-cs = <6>; -+ base-cs = <1>; -+}; ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -403,6 +403,14 @@ config SPI_NUC900 - help - SPI driver for Nuvoton NUC900 series ARM SoCs - -+config SPI_LANTIQ_SSC -+ tristate "Lantiq SSC SPI controller" -+ depends on LANTIQ -+ help -+ This driver supports the Lantiq SSC SPI controller in master -+ mode. This controller is found on Intel (former Lantiq) SoCs like -+ the Danube, Falcon, xRX200, xRX300. -+ - config SPI_OC_TINY - tristate "OpenCores tiny SPI" - depends on GPIOLIB || COMPILE_TEST ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -47,6 +47,7 @@ obj-$(CONFIG_SPI_FSL_SPI) += spi-fsl-sp - obj-$(CONFIG_SPI_GPIO) += spi-gpio.o - obj-$(CONFIG_SPI_IMG_SPFI) += spi-img-spfi.o - obj-$(CONFIG_SPI_IMX) += spi-imx.o -+obj-$(CONFIG_SPI_LANTIQ_SSC) += spi-lantiq-ssc.o - obj-$(CONFIG_SPI_JCORE) += spi-jcore.o - obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o - obj-$(CONFIG_SPI_LP8841_RTC) += spi-lp8841-rtc.o ---- /dev/null -+++ b/drivers/spi/spi-lantiq-ssc.c -@@ -0,0 +1,952 @@ -+/* -+ * Copyright (C) 2011-2015 Daniel Schwierzeck -+ * Copyright (C) 2016 Hauke Mehrtens -+ * -+ * This program is free software; you can distribute it and/or modify it -+ * under the terms of the GNU General Public License (Version 2) as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#define SPI_RX_IRQ_NAME "spi_rx" -+#define SPI_TX_IRQ_NAME "spi_tx" -+#define SPI_ERR_IRQ_NAME "spi_err" -+#define SPI_FRM_IRQ_NAME "spi_frm" -+ -+#define SPI_CLC 0x00 -+#define SPI_PISEL 0x04 -+#define SPI_ID 0x08 -+#define SPI_CON 0x10 -+#define SPI_STAT 0x14 -+#define SPI_WHBSTATE 0x18 -+#define SPI_TB 0x20 -+#define SPI_RB 0x24 -+#define SPI_RXFCON 0x30 -+#define SPI_TXFCON 0x34 -+#define SPI_FSTAT 0x38 -+#define SPI_BRT 0x40 -+#define SPI_BRSTAT 0x44 -+#define SPI_SFCON 0x60 -+#define SPI_SFSTAT 0x64 -+#define SPI_GPOCON 0x70 -+#define SPI_GPOSTAT 0x74 -+#define SPI_FPGO 0x78 -+#define SPI_RXREQ 0x80 -+#define SPI_RXCNT 0x84 -+#define SPI_DMACON 0xec -+#define SPI_IRNEN 0xf4 -+#define SPI_IRNICR 0xf8 -+#define SPI_IRNCR 0xfc -+ -+#define SPI_CLC_SMC_S 16 /* Clock divider for sleep mode */ -+#define SPI_CLC_SMC_M (0xFF << SPI_CLC_SMC_S) -+#define SPI_CLC_RMC_S 8 /* Clock divider for normal run mode */ -+#define SPI_CLC_RMC_M (0xFF << SPI_CLC_RMC_S) -+#define SPI_CLC_DISS BIT(1) /* Disable status bit */ -+#define SPI_CLC_DISR BIT(0) /* Disable request bit */ -+ -+#define SPI_ID_TXFS_S 24 /* Implemented TX FIFO size */ -+#define SPI_ID_TXFS_M (0x3F << SPI_ID_TXFS_S) -+#define SPI_ID_RXFS_S 16 /* Implemented RX FIFO size */ -+#define SPI_ID_RXFS_M (0x3F << SPI_ID_RXFS_S) -+#define SPI_ID_MOD_S 8 /* Module ID */ -+#define SPI_ID_MOD_M (0xff << SPI_ID_MOD_S) -+#define SPI_ID_CFG_S 5 /* DMA interface support */ -+#define SPI_ID_CFG_M (1 << SPI_ID_CFG_S) -+#define SPI_ID_REV_M 0x1F /* Hardware revision number */ -+ -+#define SPI_CON_BM_S 16 /* Data width selection */ -+#define SPI_CON_BM_M (0x1F << SPI_CON_BM_S) -+#define SPI_CON_EM BIT(24) /* Echo mode */ -+#define SPI_CON_IDLE BIT(23) /* Idle bit value */ -+#define SPI_CON_ENBV BIT(22) /* Enable byte valid control */ -+#define SPI_CON_RUEN BIT(12) /* Receive underflow error enable */ -+#define SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */ -+#define SPI_CON_AEN BIT(10) /* Abort error enable */ -+#define SPI_CON_REN BIT(9) /* Receive overflow error enable */ -+#define SPI_CON_TEN BIT(8) /* Transmit overflow error enable */ -+#define SPI_CON_LB BIT(7) /* Loopback control */ -+#define SPI_CON_PO BIT(6) /* Clock polarity control */ -+#define SPI_CON_PH BIT(5) /* Clock phase control */ -+#define SPI_CON_HB BIT(4) /* Heading control */ -+#define SPI_CON_RXOFF BIT(1) /* Switch receiver off */ -+#define SPI_CON_TXOFF BIT(0) /* Switch transmitter off */ -+ -+#define SPI_STAT_RXBV_S 28 -+#define SPI_STAT_RXBV_M (0x7 << SPI_STAT_RXBV_S) -+#define SPI_STAT_BSY BIT(13) /* Busy flag */ -+#define SPI_STAT_RUE BIT(12) /* Receive underflow error flag */ -+#define SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */ -+#define SPI_STAT_AE BIT(10) /* Abort error flag */ -+#define SPI_STAT_RE BIT(9) /* Receive error flag */ -+#define SPI_STAT_TE BIT(8) /* Transmit error flag */ -+#define SPI_STAT_ME BIT(7) /* Mode error flag */ -+#define SPI_STAT_MS BIT(1) /* Master/slave select bit */ -+#define SPI_STAT_EN BIT(0) /* Enable bit */ -+#define SPI_STAT_ERRORS (SPI_STAT_ME | SPI_STAT_TE | SPI_STAT_RE | \ -+ SPI_STAT_AE | SPI_STAT_TUE | SPI_STAT_RUE) -+ -+#define SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */ -+#define SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */ -+#define SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */ -+#define SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */ -+#define SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */ -+#define SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */ -+#define SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */ -+#define SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */ -+#define SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */ -+#define SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */ -+#define SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */ -+#define SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */ -+#define SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */ -+#define SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */ -+#define SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */ -+#define SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */ -+#define SPI_WHBSTATE_CLR_ERRORS (SPI_WHBSTATE_CLRRUE | SPI_WHBSTATE_CLRME | \ -+ SPI_WHBSTATE_CLRTE | SPI_WHBSTATE_CLRRE | \ -+ SPI_WHBSTATE_CLRAE | SPI_WHBSTATE_CLRTUE) -+ -+#define SPI_RXFCON_RXFITL_S 8 /* FIFO interrupt trigger level */ -+#define SPI_RXFCON_RXFITL_M (0x3F << SPI_RXFCON_RXFITL_S) -+#define SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */ -+#define SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */ -+ -+#define SPI_TXFCON_TXFITL_S 8 /* FIFO interrupt trigger level */ -+#define SPI_TXFCON_TXFITL_M (0x3F << SPI_TXFCON_TXFITL_S) -+#define SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */ -+#define SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */ -+ -+#define SPI_FSTAT_RXFFL_S 0 -+#define SPI_FSTAT_RXFFL_M (0x3f << SPI_FSTAT_RXFFL_S) -+#define SPI_FSTAT_TXFFL_S 8 -+#define SPI_FSTAT_TXFFL_M (0x3f << SPI_FSTAT_TXFFL_S) -+ -+#define SPI_GPOCON_ISCSBN_S 8 -+#define SPI_GPOCON_INVOUTN_S 0 -+ -+#define SPI_FGPO_SETOUTN_S 8 -+#define SPI_FGPO_CLROUTN_S 0 -+ -+#define SPI_RXREQ_RXCNT_M 0xFFFF /* Receive count value */ -+#define SPI_RXCNT_TODO_M 0xFFFF /* Recevie to-do value */ -+ -+#define SPI_IRNEN_TFI BIT(4) /* TX finished interrupt */ -+#define SPI_IRNEN_F BIT(3) /* Frame end interrupt request */ -+#define SPI_IRNEN_E BIT(2) /* Error end interrupt request */ -+#define SPI_IRNEN_T_XWAY BIT(1) /* Transmit end interrupt request */ -+#define SPI_IRNEN_R_XWAY BIT(0) /* Receive end interrupt request */ -+#define SPI_IRNEN_R_XRX BIT(1) /* Transmit end interrupt request */ -+#define SPI_IRNEN_T_XRX BIT(0) /* Receive end interrupt request */ -+#define SPI_IRNEN_ALL 0x1F -+ -+struct lantiq_ssc_hwcfg { -+ unsigned int irnen_r; -+ unsigned int irnen_t; -+}; -+ -+struct lantiq_ssc_spi { -+ struct spi_master *master; -+ struct device *dev; -+ void __iomem *regbase; -+ struct clk *spi_clk; -+ struct clk *fpi_clk; -+ const struct lantiq_ssc_hwcfg *hwcfg; -+ -+ spinlock_t lock; -+ -+ const u8 *tx; -+ u8 *rx; -+ unsigned int tx_todo; -+ unsigned int rx_todo; -+ unsigned int bits_per_word; -+ unsigned int speed_hz; -+ int status; -+ unsigned int tx_fifo_size; -+ unsigned int rx_fifo_size; -+ unsigned int base_cs; -+}; -+ -+static u32 lantiq_ssc_readl(const struct lantiq_ssc_spi *spi, u32 reg) -+{ -+ return __raw_readl(spi->regbase + reg); -+} -+ -+static void lantiq_ssc_writel(const struct lantiq_ssc_spi *spi, u32 val, -+ u32 reg) -+{ -+ __raw_writel(val, spi->regbase + reg); -+} -+ -+static void lantiq_ssc_maskl(const struct lantiq_ssc_spi *spi, u32 clr, -+ u32 set, u32 reg) -+{ -+ u32 val = __raw_readl(spi->regbase + reg); -+ -+ val &= ~clr; -+ val |= set; -+ __raw_writel(val, spi->regbase + reg); -+} -+ -+static unsigned int tx_fifo_level(const struct lantiq_ssc_spi *spi) -+{ -+ u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT); -+ -+ return (fstat & SPI_FSTAT_TXFFL_M) >> SPI_FSTAT_TXFFL_S; -+} -+ -+static unsigned int rx_fifo_level(const struct lantiq_ssc_spi *spi) -+{ -+ u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT); -+ -+ return fstat & SPI_FSTAT_RXFFL_M; -+} -+ -+static unsigned int tx_fifo_free(const struct lantiq_ssc_spi *spi) -+{ -+ return spi->tx_fifo_size - tx_fifo_level(spi); -+} -+ -+static void rx_fifo_reset(const struct lantiq_ssc_spi *spi) -+{ -+ u32 val = spi->rx_fifo_size << SPI_RXFCON_RXFITL_S; -+ -+ val |= SPI_RXFCON_RXFEN | SPI_RXFCON_RXFLU; -+ lantiq_ssc_writel(spi, val, SPI_RXFCON); -+} -+ -+static void tx_fifo_reset(const struct lantiq_ssc_spi *spi) -+{ -+ u32 val = 1 << SPI_TXFCON_TXFITL_S; -+ -+ val |= SPI_TXFCON_TXFEN | SPI_TXFCON_TXFLU; -+ lantiq_ssc_writel(spi, val, SPI_TXFCON); -+} -+ -+static void rx_fifo_flush(const struct lantiq_ssc_spi *spi) -+{ -+ lantiq_ssc_maskl(spi, 0, SPI_RXFCON_RXFLU, SPI_RXFCON); -+} -+ -+static void tx_fifo_flush(const struct lantiq_ssc_spi *spi) -+{ -+ lantiq_ssc_maskl(spi, 0, SPI_TXFCON_TXFLU, SPI_TXFCON); -+} -+ -+static void hw_enter_config_mode(const struct lantiq_ssc_spi *spi) -+{ -+ lantiq_ssc_writel(spi, SPI_WHBSTATE_CLREN, SPI_WHBSTATE); -+} -+ -+static void hw_enter_active_mode(const struct lantiq_ssc_spi *spi) -+{ -+ lantiq_ssc_writel(spi, SPI_WHBSTATE_SETEN, SPI_WHBSTATE); -+} -+ -+static void hw_setup_speed_hz(const struct lantiq_ssc_spi *spi, -+ unsigned int max_speed_hz) -+{ -+ u32 spi_clk, brt; -+ -+ /* -+ * SPI module clock is derived from FPI bus clock dependent on -+ * divider value in CLC.RMS which is always set to 1. -+ * -+ * f_SPI -+ * baudrate = -------------- -+ * 2 * (BR + 1) -+ */ -+ spi_clk = clk_get_rate(spi->fpi_clk) / 2; -+ -+ if (max_speed_hz > spi_clk) -+ brt = 0; -+ else -+ brt = spi_clk / max_speed_hz - 1; -+ -+ if (brt > 0xFFFF) -+ brt = 0xFFFF; -+ -+ dev_dbg(spi->dev, "spi_clk %u, max_speed_hz %u, brt %u\n", -+ spi_clk, max_speed_hz, brt); -+ -+ lantiq_ssc_writel(spi, brt, SPI_BRT); -+} -+ -+static void hw_setup_bits_per_word(const struct lantiq_ssc_spi *spi, -+ unsigned int bits_per_word) -+{ -+ u32 bm; -+ -+ /* CON.BM value = bits_per_word - 1 */ -+ bm = (bits_per_word - 1) << SPI_CON_BM_S; -+ -+ lantiq_ssc_maskl(spi, SPI_CON_BM_M, bm, SPI_CON); -+} -+ -+static void hw_setup_clock_mode(const struct lantiq_ssc_spi *spi, -+ unsigned int mode) -+{ -+ u32 con_set = 0, con_clr = 0; -+ -+ /* -+ * SPI mode mapping in CON register: -+ * Mode CPOL CPHA CON.PO CON.PH -+ * 0 0 0 0 1 -+ * 1 0 1 0 0 -+ * 2 1 0 1 1 -+ * 3 1 1 1 0 -+ */ -+ if (mode & SPI_CPHA) -+ con_clr |= SPI_CON_PH; -+ else -+ con_set |= SPI_CON_PH; -+ -+ if (mode & SPI_CPOL) -+ con_set |= SPI_CON_PO | SPI_CON_IDLE; -+ else -+ con_clr |= SPI_CON_PO | SPI_CON_IDLE; -+ -+ /* Set heading control */ -+ if (mode & SPI_LSB_FIRST) -+ con_clr |= SPI_CON_HB; -+ else -+ con_set |= SPI_CON_HB; -+ -+ /* Set loopback mode */ -+ if (mode & SPI_LOOP) -+ con_set |= SPI_CON_LB; -+ else -+ con_clr |= SPI_CON_LB; -+ -+ lantiq_ssc_maskl(spi, con_clr, con_set, SPI_CON); -+} -+ -+static void lantiq_ssc_hw_init(const struct lantiq_ssc_spi *spi) -+{ -+ const struct lantiq_ssc_hwcfg *hwcfg = spi->hwcfg; -+ -+ /* -+ * Set clock divider for run mode to 1 to -+ * run at same frequency as FPI bus -+ */ -+ lantiq_ssc_writel(spi, 1 << SPI_CLC_RMC_S, SPI_CLC); -+ -+ /* Put controller into config mode */ -+ hw_enter_config_mode(spi); -+ -+ /* Clear error flags */ -+ lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE); -+ -+ /* Enable error checking, disable TX/RX */ -+ lantiq_ssc_writel(spi, SPI_CON_RUEN | SPI_CON_AEN | SPI_CON_TEN | -+ SPI_CON_REN | SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON); -+ -+ /* Setup default SPI mode */ -+ hw_setup_bits_per_word(spi, spi->bits_per_word); -+ hw_setup_clock_mode(spi, SPI_MODE_0); -+ -+ /* Enable master mode and clear error flags */ -+ lantiq_ssc_writel(spi, SPI_WHBSTATE_SETMS | SPI_WHBSTATE_CLR_ERRORS, -+ SPI_WHBSTATE); -+ -+ /* Reset GPIO/CS registers */ -+ lantiq_ssc_writel(spi, 0, SPI_GPOCON); -+ lantiq_ssc_writel(spi, 0xFF00, SPI_FPGO); -+ -+ /* Enable and flush FIFOs */ -+ rx_fifo_reset(spi); -+ tx_fifo_reset(spi); -+ -+ /* Enable interrupts */ -+ lantiq_ssc_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r | SPI_IRNEN_E, -+ SPI_IRNEN); -+} -+ -+static int lantiq_ssc_setup(struct spi_device *spidev) -+{ -+ struct spi_master *master = spidev->master; -+ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master); -+ unsigned int cs = spidev->chip_select; -+ u32 gpocon; -+ -+ /* GPIOs are used for CS */ -+ if (gpio_is_valid(spidev->cs_gpio)) -+ return 0; -+ -+ dev_dbg(spi->dev, "using internal chipselect %u\n", cs); -+ -+ if (cs < spi->base_cs) { -+ dev_err(spi->dev, -+ "chipselect %i too small (min %i)\n", cs, spi->base_cs); -+ return -EINVAL; -+ } -+ -+ /* set GPO pin to CS mode */ -+ gpocon = 1 << ((cs - spi->base_cs) + SPI_GPOCON_ISCSBN_S); -+ -+ /* invert GPO pin */ -+ if (spidev->mode & SPI_CS_HIGH) -+ gpocon |= 1 << (cs - spi->base_cs); -+ -+ lantiq_ssc_maskl(spi, 0, gpocon, SPI_GPOCON); -+ -+ return 0; -+} -+ -+static int lantiq_ssc_prepare_message(struct spi_master *master, -+ struct spi_message *message) -+{ -+ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master); -+ -+ hw_enter_config_mode(spi); -+ hw_setup_clock_mode(spi, message->spi->mode); -+ hw_enter_active_mode(spi); -+ -+ return 0; -+} -+ -+static void hw_setup_transfer(struct lantiq_ssc_spi *spi, -+ struct spi_device *spidev, struct spi_transfer *t) -+{ -+ unsigned int speed_hz = t->speed_hz; -+ unsigned int bits_per_word = t->bits_per_word; -+ u32 con; -+ -+ if (bits_per_word != spi->bits_per_word || -+ speed_hz != spi->speed_hz) { -+ hw_enter_config_mode(spi); -+ hw_setup_speed_hz(spi, speed_hz); -+ hw_setup_bits_per_word(spi, bits_per_word); -+ hw_enter_active_mode(spi); -+ -+ spi->speed_hz = speed_hz; -+ spi->bits_per_word = bits_per_word; -+ } -+ -+ /* Configure transmitter and receiver */ -+ con = lantiq_ssc_readl(spi, SPI_CON); -+ if (t->tx_buf) -+ con &= ~SPI_CON_TXOFF; -+ else -+ con |= SPI_CON_TXOFF; -+ -+ if (t->rx_buf) -+ con &= ~SPI_CON_RXOFF; -+ else -+ con |= SPI_CON_RXOFF; -+ -+ lantiq_ssc_writel(spi, con, SPI_CON); -+} -+ -+static int lantiq_ssc_unprepare_message(struct spi_master *master, -+ struct spi_message *message) -+{ -+ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master); -+ -+ /* Disable transmitter and receiver while idle */ -+ lantiq_ssc_maskl(spi, 0, SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON); -+ -+ return 0; -+} -+ -+static void tx_fifo_write(struct lantiq_ssc_spi *spi) -+{ -+ const u8 *tx8; -+ const u16 *tx16; -+ const u32 *tx32; -+ u32 data; -+ unsigned int tx_free = tx_fifo_free(spi); -+ -+ while (spi->tx_todo && tx_free) { -+ switch (spi->bits_per_word) { -+ case 2 ... 8: -+ tx8 = spi->tx; -+ data = *tx8; -+ spi->tx_todo--; -+ spi->tx++; -+ break; -+ case 16: -+ tx16 = (u16 *) spi->tx; -+ data = *tx16; -+ spi->tx_todo -= 2; -+ spi->tx += 2; -+ break; -+ case 32: -+ tx32 = (u32 *) spi->tx; -+ data = *tx32; -+ spi->tx_todo -= 4; -+ spi->tx += 4; -+ break; -+ default: -+ WARN_ON(1); -+ data = 0; -+ break; -+ } -+ -+ lantiq_ssc_writel(spi, data, SPI_TB); -+ tx_free--; -+ } -+} -+ -+static void rx_fifo_read_full_duplex(struct lantiq_ssc_spi *spi) -+{ -+ u8 *rx8; -+ u16 *rx16; -+ u32 *rx32; -+ u32 data; -+ unsigned int rx_fill = rx_fifo_level(spi); -+ -+ while (rx_fill) { -+ data = lantiq_ssc_readl(spi, SPI_RB); -+ -+ switch (spi->bits_per_word) { -+ case 2 ... 8: -+ rx8 = spi->rx; -+ *rx8 = data; -+ spi->rx_todo--; -+ spi->rx++; -+ break; -+ case 16: -+ rx16 = (u16 *) spi->rx; -+ *rx16 = data; -+ spi->rx_todo -= 2; -+ spi->rx += 2; -+ break; -+ case 32: -+ rx32 = (u32 *) spi->rx; -+ *rx32 = data; -+ spi->rx_todo -= 4; -+ spi->rx += 4; -+ break; -+ default: -+ WARN_ON(1); -+ break; -+ } -+ -+ rx_fill--; -+ } -+} -+ -+static void rx_fifo_read_half_duplex(struct lantiq_ssc_spi *spi) -+{ -+ u32 data, *rx32; -+ u8 *rx8; -+ unsigned int rxbv, shift; -+ unsigned int rx_fill = rx_fifo_level(spi); -+ -+ /* -+ * In RX-only mode the bits per word value is ignored by HW. A value -+ * of 32 is used instead. Thus all 4 bytes per FIFO must be read. -+ * If remaining RX bytes are less than 4, the FIFO must be read -+ * differently. The amount of received and valid bytes is indicated -+ * by STAT.RXBV register value. -+ */ -+ while (rx_fill) { -+ if (spi->rx_todo < 4) { -+ rxbv = (lantiq_ssc_readl(spi, SPI_STAT) & -+ SPI_STAT_RXBV_M) >> SPI_STAT_RXBV_S; -+ data = lantiq_ssc_readl(spi, SPI_RB); -+ -+ shift = (rxbv - 1) * 8; -+ rx8 = spi->rx; -+ -+ while (rxbv) { -+ *rx8++ = (data >> shift) & 0xFF; -+ rxbv--; -+ shift -= 8; -+ spi->rx_todo--; -+ spi->rx++; -+ } -+ } else { -+ data = lantiq_ssc_readl(spi, SPI_RB); -+ rx32 = (u32 *) spi->rx; -+ -+ *rx32++ = data; -+ spi->rx_todo -= 4; -+ spi->rx += 4; -+ } -+ rx_fill--; -+ } -+} -+ -+static void rx_request(struct lantiq_ssc_spi *spi) -+{ -+ unsigned int rxreq, rxreq_max; -+ -+ /* -+ * To avoid receive overflows at high clocks it is better to request -+ * only the amount of bytes that fits into all FIFOs. This value -+ * depends on the FIFO size implemented in hardware. -+ */ -+ rxreq = spi->rx_todo; -+ rxreq_max = spi->rx_fifo_size * 4; -+ if (rxreq > rxreq_max) -+ rxreq = rxreq_max; -+ -+ lantiq_ssc_writel(spi, rxreq, SPI_RXREQ); -+} -+ -+static irqreturn_t lantiq_ssc_xmit_interrupt(int irq, void *data) -+{ -+ struct lantiq_ssc_spi *spi = data; -+ -+ if (spi->tx) { -+ if (spi->rx && spi->rx_todo) -+ rx_fifo_read_full_duplex(spi); -+ -+ if (spi->tx_todo) -+ tx_fifo_write(spi); -+ else if (!tx_fifo_level(spi)) -+ goto completed; -+ } else if (spi->rx) { -+ if (spi->rx_todo) { -+ rx_fifo_read_half_duplex(spi); -+ -+ if (spi->rx_todo) -+ rx_request(spi); -+ else -+ goto completed; -+ } else { -+ goto completed; -+ } -+ } -+ -+ return IRQ_HANDLED; -+ -+completed: -+ spi->status = 0; -+ spi_finalize_current_transfer(spi->master); -+ -+ return IRQ_HANDLED; -+} -+ -+static irqreturn_t lantiq_ssc_err_interrupt(int irq, void *data) -+{ -+ struct lantiq_ssc_spi *spi = data; -+ u32 stat = lantiq_ssc_readl(spi, SPI_STAT); -+ -+ if (!(stat & SPI_STAT_ERRORS)) -+ return IRQ_NONE; -+ -+ if (stat & SPI_STAT_RUE) -+ dev_err(spi->dev, "receive underflow error\n"); -+ if (stat & SPI_STAT_TUE) -+ dev_err(spi->dev, "transmit underflow error\n"); -+ if (stat & SPI_STAT_AE) -+ dev_err(spi->dev, "abort error\n"); -+ if (stat & SPI_STAT_RE) -+ dev_err(spi->dev, "receive overflow error\n"); -+ if (stat & SPI_STAT_TE) -+ dev_err(spi->dev, "transmit overflow error\n"); -+ if (stat & SPI_STAT_ME) -+ dev_err(spi->dev, "mode error\n"); -+ -+ /* Clear error flags */ -+ lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE); -+ -+ /* set bad status so it can be retried */ -+ spi->status = -EIO; -+ spi_finalize_current_transfer(spi->master); -+ -+ return IRQ_HANDLED; -+} -+ -+static int transfer_start(struct lantiq_ssc_spi *spi, struct spi_device *spidev, -+ struct spi_transfer *t) -+{ -+ unsigned long flags; -+ -+ spin_lock_irqsave(&spi->lock, flags); -+ -+ spi->tx = t->tx_buf; -+ spi->rx = t->rx_buf; -+ spi->status = -EINPROGRESS; -+ -+ if (t->tx_buf) { -+ spi->tx_todo = t->len; -+ -+ /* initially fill TX FIFO */ -+ tx_fifo_write(spi); -+ } -+ -+ if (spi->rx) { -+ spi->rx_todo = t->len; -+ -+ /* start shift clock in RX-only mode */ -+ if (!spi->tx) -+ rx_request(spi); -+ } -+ -+ spin_unlock_irqrestore(&spi->lock, flags); -+ -+ return t->len; -+} -+ -+static int lantiq_ssc_transfer_status(struct spi_master *master, -+ unsigned long timeout) -+{ -+ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master); -+ unsigned long end; -+ -+ /* -+ * The driver only gets an interrupt when the FIFO is empty, but there -+ * is an additional shift register from which the data is written to -+ * the wire. We get the last interrupt when the controller starts to -+ * write the last word to the wire, not when it is finished. Do busy -+ * waiting till it finishes. -+ */ -+ end = jiffies + timeout; -+ do { -+ u32 stat = lantiq_ssc_readl(spi, SPI_STAT); -+ -+ if (!(stat & SPI_STAT_BSY)) -+ return spi->status; -+ -+ cond_resched(); -+ } while (!time_after_eq(jiffies, end)); -+ -+ return -ETIMEDOUT; -+} -+ -+static void lantiq_ssc_handle_err(struct spi_master *master, -+ struct spi_message *message) -+{ -+ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master); -+ -+ /* flush FIFOs on timeout */ -+ rx_fifo_flush(spi); -+ tx_fifo_flush(spi); -+} -+ -+static void lantiq_ssc_set_cs(struct spi_device *spidev, bool enable) -+{ -+ struct lantiq_ssc_spi *spi = spi_master_get_devdata(spidev->master); -+ unsigned int cs = spidev->chip_select; -+ u32 fgpo; -+ -+ if (!!(spidev->mode & SPI_CS_HIGH) == enable) -+ fgpo = (1 << (cs - spi->base_cs)); -+ else -+ fgpo = (1 << (cs - spi->base_cs + SPI_FGPO_SETOUTN_S)); -+ -+ lantiq_ssc_writel(spi, fgpo, SPI_FPGO); -+} -+ -+static int lantiq_ssc_transfer_one(struct spi_master *master, -+ struct spi_device *spidev, -+ struct spi_transfer *t) -+{ -+ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master); -+ -+ hw_setup_transfer(spi, spidev, t); -+ -+ return transfer_start(spi, spidev, t); -+} -+ -+static const struct lantiq_ssc_hwcfg lantiq_ssc_xway = { -+ .irnen_r = SPI_IRNEN_R_XWAY, -+ .irnen_t = SPI_IRNEN_T_XWAY, -+}; -+ -+static const struct lantiq_ssc_hwcfg lantiq_ssc_xrx = { -+ .irnen_r = SPI_IRNEN_R_XRX, -+ .irnen_t = SPI_IRNEN_T_XRX, -+}; -+ -+static const struct of_device_id lantiq_ssc_match[] = { -+ { .compatible = "lantiq,ase-spi", .data = &lantiq_ssc_xway, }, -+ { .compatible = "lantiq,falcon-spi", .data = &lantiq_ssc_xrx, }, -+ { .compatible = "lantiq,xrx100-spi", .data = &lantiq_ssc_xrx, }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, lantiq_ssc_match); -+ -+static int lantiq_ssc_probe(struct platform_device *pdev) -+{ -+ struct spi_master *master; -+ struct resource *res; -+ struct lantiq_ssc_spi *spi; -+ const struct lantiq_ssc_hwcfg *hwcfg; -+ const struct of_device_id *match; -+ int err, rx_irq, tx_irq, err_irq; -+ u32 id, supports_dma, revision; -+ unsigned int num_cs; -+ -+ match = of_match_device(lantiq_ssc_match, &pdev->dev); -+ if (!match) { -+ dev_err(&pdev->dev, "no device match\n"); -+ return -EINVAL; -+ } -+ hwcfg = match->data; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) { -+ dev_err(&pdev->dev, "failed to get resources\n"); -+ return -ENXIO; -+ } -+ -+ rx_irq = platform_get_irq_byname(pdev, SPI_RX_IRQ_NAME); -+ if (rx_irq < 0) { -+ dev_err(&pdev->dev, "failed to get %s\n", SPI_RX_IRQ_NAME); -+ return -ENXIO; -+ } -+ -+ tx_irq = platform_get_irq_byname(pdev, SPI_TX_IRQ_NAME); -+ if (tx_irq < 0) { -+ dev_err(&pdev->dev, "failed to get %s\n", SPI_TX_IRQ_NAME); -+ return -ENXIO; -+ } -+ -+ err_irq = platform_get_irq_byname(pdev, SPI_ERR_IRQ_NAME); -+ if (err_irq < 0) { -+ dev_err(&pdev->dev, "failed to get %s\n", SPI_ERR_IRQ_NAME); -+ return -ENXIO; -+ } -+ -+ master = spi_alloc_master(&pdev->dev, sizeof(struct lantiq_ssc_spi)); -+ if (!master) -+ return -ENOMEM; -+ -+ spi = spi_master_get_devdata(master); -+ spi->master = master; -+ spi->dev = &pdev->dev; -+ spi->hwcfg = hwcfg; -+ platform_set_drvdata(pdev, spi); -+ -+ spi->regbase = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(spi->regbase)) { -+ err = PTR_ERR(spi->regbase); -+ goto err_master_put; -+ } -+ -+ err = devm_request_irq(&pdev->dev, rx_irq, lantiq_ssc_xmit_interrupt, -+ 0, SPI_RX_IRQ_NAME, spi); -+ if (err) -+ goto err_master_put; -+ -+ err = devm_request_irq(&pdev->dev, tx_irq, lantiq_ssc_xmit_interrupt, -+ 0, SPI_TX_IRQ_NAME, spi); -+ if (err) -+ goto err_master_put; -+ -+ err = devm_request_irq(&pdev->dev, err_irq, lantiq_ssc_err_interrupt, -+ 0, SPI_ERR_IRQ_NAME, spi); -+ if (err) -+ goto err_master_put; -+ -+ spi->spi_clk = devm_clk_get(&pdev->dev, NULL); -+ if (IS_ERR(spi->spi_clk)) { -+ err = PTR_ERR(spi->spi_clk); -+ goto err_master_put; -+ } -+ err = clk_prepare_enable(spi->spi_clk); -+ if (err) -+ goto err_master_put; -+ -+ spi->fpi_clk = clk_get_fpi(); -+ if (IS_ERR(spi->fpi_clk)) { -+ err = PTR_ERR(spi->fpi_clk); -+ goto err_clk_disable; -+ } -+ -+ num_cs = 8; -+ of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs); -+ -+ spi->base_cs = 1; -+ of_property_read_u32(pdev->dev.of_node, "base-cs", &spi->base_cs); -+ -+ spin_lock_init(&spi->lock); -+ spi->bits_per_word = 8; -+ spi->speed_hz = 0; -+ -+ master->dev.of_node = pdev->dev.of_node; -+ master->num_chipselect = num_cs; -+ master->setup = lantiq_ssc_setup; -+ master->set_cs = lantiq_ssc_set_cs; -+ master->handle_err = lantiq_ssc_handle_err; -+ master->prepare_message = lantiq_ssc_prepare_message; -+ master->unprepare_message = lantiq_ssc_unprepare_message; -+ master->transfer_one = lantiq_ssc_transfer_one; -+ master->transfer_status = lantiq_ssc_transfer_status; -+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH | -+ SPI_LOOP; -+ master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 8) | -+ SPI_BPW_MASK(16) | SPI_BPW_MASK(32); -+ -+ id = lantiq_ssc_readl(spi, SPI_ID); -+ spi->tx_fifo_size = (id & SPI_ID_TXFS_M) >> SPI_ID_TXFS_S; -+ spi->rx_fifo_size = (id & SPI_ID_RXFS_M) >> SPI_ID_RXFS_S; -+ supports_dma = (id & SPI_ID_CFG_M) >> SPI_ID_CFG_S; -+ revision = id & SPI_ID_REV_M; -+ -+ lantiq_ssc_hw_init(spi); -+ -+ dev_info(&pdev->dev, -+ "Lantiq SSC SPI controller (Rev %i, TXFS %u, RXFS %u, DMA %u)\n", -+ revision, spi->tx_fifo_size, spi->rx_fifo_size, supports_dma); -+ -+ err = devm_spi_register_master(&pdev->dev, master); -+ if (err) { -+ dev_err(&pdev->dev, "failed to register spi_master\n"); -+ goto err_clk_put; -+ } -+ -+ return 0; -+ -+err_clk_put: -+ clk_put(spi->fpi_clk); -+err_clk_disable: -+ clk_disable_unprepare(spi->spi_clk); -+err_master_put: -+ spi_master_put(master); -+ -+ return err; -+} -+ -+static int lantiq_ssc_remove(struct platform_device *pdev) -+{ -+ struct lantiq_ssc_spi *spi = platform_get_drvdata(pdev); -+ -+ lantiq_ssc_writel(spi, 0, SPI_IRNEN); -+ lantiq_ssc_writel(spi, 0, SPI_CLC); -+ rx_fifo_flush(spi); -+ tx_fifo_flush(spi); -+ hw_enter_config_mode(spi); -+ -+ clk_disable_unprepare(spi->spi_clk); -+ clk_put(spi->fpi_clk); -+ -+ return 0; -+} -+ -+static struct platform_driver lantiq_ssc_driver = { -+ .probe = lantiq_ssc_probe, -+ .remove = lantiq_ssc_remove, -+ .driver = { -+ .name = "spi-lantiq-ssc", -+ .owner = THIS_MODULE, -+ .of_match_table = lantiq_ssc_match, -+ }, -+}; -+module_platform_driver(lantiq_ssc_driver); -+ -+MODULE_DESCRIPTION("Lantiq SSC SPI controller driver"); -+MODULE_AUTHOR("Daniel Schwierzeck "); -+MODULE_AUTHOR("Hauke Mehrtens "); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS("platform:spi-lantiq-ssc"); diff --git a/target/linux/lantiq/patches-4.9/0091-spi-lantiq-ssc-fix-platform_no_drv_owner.cocci-warni.patch b/target/linux/lantiq/patches-4.9/0091-spi-lantiq-ssc-fix-platform_no_drv_owner.cocci-warni.patch new file mode 100644 index 0000000000..e81f97f9d4 --- /dev/null +++ b/target/linux/lantiq/patches-4.9/0091-spi-lantiq-ssc-fix-platform_no_drv_owner.cocci-warni.patch @@ -0,0 +1,28 @@ +From ba6e1e39969fa5435127a632757e2906caca7730 Mon Sep 17 00:00:00 2001 +From: kbuild test robot +Date: Mon, 20 Feb 2017 01:33:10 +0800 +Subject: spi: lantiq-ssc: fix platform_no_drv_owner.cocci warnings + +drivers/spi/spi-lantiq-ssc.c:973:3-8: No need to set .owner here. The core will do it. + + Remove .owner field if calls are used which set it automatically + +Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci + +Signed-off-by: Fengguang Wu +Acked-by: Hauke Mehrtens +Signed-off-by: Mark Brown +--- + drivers/spi/spi-lantiq-ssc.c | 1 - + 1 file changed, 1 deletion(-) + +--- a/drivers/spi/spi-lantiq-ssc.c ++++ b/drivers/spi/spi-lantiq-ssc.c +@@ -970,7 +970,6 @@ static struct platform_driver lantiq_ssc + .remove = lantiq_ssc_remove, + .driver = { + .name = "spi-lantiq-ssc", +- .owner = THIS_MODULE, + .of_match_table = lantiq_ssc_match, + }, + }; diff --git a/target/linux/lantiq/patches-4.9/0092-spi-lantiq-ssc-add-LTQ_-prefix-to-defines.patch b/target/linux/lantiq/patches-4.9/0092-spi-lantiq-ssc-add-LTQ_-prefix-to-defines.patch new file mode 100644 index 0000000000..9bcde3c08a --- /dev/null +++ b/target/linux/lantiq/patches-4.9/0092-spi-lantiq-ssc-add-LTQ_-prefix-to-defines.patch @@ -0,0 +1,723 @@ +From 1aa83e0a2821cd7f4e8f3ddb367859f52e468bf1 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Mon, 27 Feb 2017 23:21:25 +0100 +Subject: spi: lantiq-ssc: add LTQ_ prefix to defines + +The blackfin architecture has a SPI_STAT define which conflicts with +the define from the spi-lantiq-ssc driver in compile test mode. Fix +this by adding a prefix in front of every define. + +Reported-by: kbuild test robot +Signed-off-by: Hauke Mehrtens +Signed-off-by: Mark Brown +--- + drivers/spi/spi-lantiq-ssc.c | 437 ++++++++++++++++++++++--------------------- + 1 file changed, 222 insertions(+), 215 deletions(-) + +--- a/drivers/spi/spi-lantiq-ssc.c ++++ b/drivers/spi/spi-lantiq-ssc.c +@@ -26,136 +26,140 @@ + #include + #endif + +-#define SPI_RX_IRQ_NAME "spi_rx" +-#define SPI_TX_IRQ_NAME "spi_tx" +-#define SPI_ERR_IRQ_NAME "spi_err" +-#define SPI_FRM_IRQ_NAME "spi_frm" +- +-#define SPI_CLC 0x00 +-#define SPI_PISEL 0x04 +-#define SPI_ID 0x08 +-#define SPI_CON 0x10 +-#define SPI_STAT 0x14 +-#define SPI_WHBSTATE 0x18 +-#define SPI_TB 0x20 +-#define SPI_RB 0x24 +-#define SPI_RXFCON 0x30 +-#define SPI_TXFCON 0x34 +-#define SPI_FSTAT 0x38 +-#define SPI_BRT 0x40 +-#define SPI_BRSTAT 0x44 +-#define SPI_SFCON 0x60 +-#define SPI_SFSTAT 0x64 +-#define SPI_GPOCON 0x70 +-#define SPI_GPOSTAT 0x74 +-#define SPI_FPGO 0x78 +-#define SPI_RXREQ 0x80 +-#define SPI_RXCNT 0x84 +-#define SPI_DMACON 0xec +-#define SPI_IRNEN 0xf4 +-#define SPI_IRNICR 0xf8 +-#define SPI_IRNCR 0xfc +- +-#define SPI_CLC_SMC_S 16 /* Clock divider for sleep mode */ +-#define SPI_CLC_SMC_M (0xFF << SPI_CLC_SMC_S) +-#define SPI_CLC_RMC_S 8 /* Clock divider for normal run mode */ +-#define SPI_CLC_RMC_M (0xFF << SPI_CLC_RMC_S) +-#define SPI_CLC_DISS BIT(1) /* Disable status bit */ +-#define SPI_CLC_DISR BIT(0) /* Disable request bit */ +- +-#define SPI_ID_TXFS_S 24 /* Implemented TX FIFO size */ +-#define SPI_ID_TXFS_M (0x3F << SPI_ID_TXFS_S) +-#define SPI_ID_RXFS_S 16 /* Implemented RX FIFO size */ +-#define SPI_ID_RXFS_M (0x3F << SPI_ID_RXFS_S) +-#define SPI_ID_MOD_S 8 /* Module ID */ +-#define SPI_ID_MOD_M (0xff << SPI_ID_MOD_S) +-#define SPI_ID_CFG_S 5 /* DMA interface support */ +-#define SPI_ID_CFG_M (1 << SPI_ID_CFG_S) +-#define SPI_ID_REV_M 0x1F /* Hardware revision number */ +- +-#define SPI_CON_BM_S 16 /* Data width selection */ +-#define SPI_CON_BM_M (0x1F << SPI_CON_BM_S) +-#define SPI_CON_EM BIT(24) /* Echo mode */ +-#define SPI_CON_IDLE BIT(23) /* Idle bit value */ +-#define SPI_CON_ENBV BIT(22) /* Enable byte valid control */ +-#define SPI_CON_RUEN BIT(12) /* Receive underflow error enable */ +-#define SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */ +-#define SPI_CON_AEN BIT(10) /* Abort error enable */ +-#define SPI_CON_REN BIT(9) /* Receive overflow error enable */ +-#define SPI_CON_TEN BIT(8) /* Transmit overflow error enable */ +-#define SPI_CON_LB BIT(7) /* Loopback control */ +-#define SPI_CON_PO BIT(6) /* Clock polarity control */ +-#define SPI_CON_PH BIT(5) /* Clock phase control */ +-#define SPI_CON_HB BIT(4) /* Heading control */ +-#define SPI_CON_RXOFF BIT(1) /* Switch receiver off */ +-#define SPI_CON_TXOFF BIT(0) /* Switch transmitter off */ +- +-#define SPI_STAT_RXBV_S 28 +-#define SPI_STAT_RXBV_M (0x7 << SPI_STAT_RXBV_S) +-#define SPI_STAT_BSY BIT(13) /* Busy flag */ +-#define SPI_STAT_RUE BIT(12) /* Receive underflow error flag */ +-#define SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */ +-#define SPI_STAT_AE BIT(10) /* Abort error flag */ +-#define SPI_STAT_RE BIT(9) /* Receive error flag */ +-#define SPI_STAT_TE BIT(8) /* Transmit error flag */ +-#define SPI_STAT_ME BIT(7) /* Mode error flag */ +-#define SPI_STAT_MS BIT(1) /* Master/slave select bit */ +-#define SPI_STAT_EN BIT(0) /* Enable bit */ +-#define SPI_STAT_ERRORS (SPI_STAT_ME | SPI_STAT_TE | SPI_STAT_RE | \ +- SPI_STAT_AE | SPI_STAT_TUE | SPI_STAT_RUE) +- +-#define SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */ +-#define SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */ +-#define SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */ +-#define SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */ +-#define SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */ +-#define SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */ +-#define SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */ +-#define SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */ +-#define SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */ +-#define SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */ +-#define SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */ +-#define SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */ +-#define SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */ +-#define SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */ +-#define SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */ +-#define SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */ +-#define SPI_WHBSTATE_CLR_ERRORS (SPI_WHBSTATE_CLRRUE | SPI_WHBSTATE_CLRME | \ +- SPI_WHBSTATE_CLRTE | SPI_WHBSTATE_CLRRE | \ +- SPI_WHBSTATE_CLRAE | SPI_WHBSTATE_CLRTUE) +- +-#define SPI_RXFCON_RXFITL_S 8 /* FIFO interrupt trigger level */ +-#define SPI_RXFCON_RXFITL_M (0x3F << SPI_RXFCON_RXFITL_S) +-#define SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */ +-#define SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */ +- +-#define SPI_TXFCON_TXFITL_S 8 /* FIFO interrupt trigger level */ +-#define SPI_TXFCON_TXFITL_M (0x3F << SPI_TXFCON_TXFITL_S) +-#define SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */ +-#define SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */ +- +-#define SPI_FSTAT_RXFFL_S 0 +-#define SPI_FSTAT_RXFFL_M (0x3f << SPI_FSTAT_RXFFL_S) +-#define SPI_FSTAT_TXFFL_S 8 +-#define SPI_FSTAT_TXFFL_M (0x3f << SPI_FSTAT_TXFFL_S) +- +-#define SPI_GPOCON_ISCSBN_S 8 +-#define SPI_GPOCON_INVOUTN_S 0 +- +-#define SPI_FGPO_SETOUTN_S 8 +-#define SPI_FGPO_CLROUTN_S 0 +- +-#define SPI_RXREQ_RXCNT_M 0xFFFF /* Receive count value */ +-#define SPI_RXCNT_TODO_M 0xFFFF /* Recevie to-do value */ +- +-#define SPI_IRNEN_TFI BIT(4) /* TX finished interrupt */ +-#define SPI_IRNEN_F BIT(3) /* Frame end interrupt request */ +-#define SPI_IRNEN_E BIT(2) /* Error end interrupt request */ +-#define SPI_IRNEN_T_XWAY BIT(1) /* Transmit end interrupt request */ +-#define SPI_IRNEN_R_XWAY BIT(0) /* Receive end interrupt request */ +-#define SPI_IRNEN_R_XRX BIT(1) /* Transmit end interrupt request */ +-#define SPI_IRNEN_T_XRX BIT(0) /* Receive end interrupt request */ +-#define SPI_IRNEN_ALL 0x1F ++#define LTQ_SPI_RX_IRQ_NAME "spi_rx" ++#define LTQ_SPI_TX_IRQ_NAME "spi_tx" ++#define LTQ_SPI_ERR_IRQ_NAME "spi_err" ++#define LTQ_SPI_FRM_IRQ_NAME "spi_frm" ++ ++#define LTQ_SPI_CLC 0x00 ++#define LTQ_SPI_PISEL 0x04 ++#define LTQ_SPI_ID 0x08 ++#define LTQ_SPI_CON 0x10 ++#define LTQ_SPI_STAT 0x14 ++#define LTQ_SPI_WHBSTATE 0x18 ++#define LTQ_SPI_TB 0x20 ++#define LTQ_SPI_RB 0x24 ++#define LTQ_SPI_RXFCON 0x30 ++#define LTQ_SPI_TXFCON 0x34 ++#define LTQ_SPI_FSTAT 0x38 ++#define LTQ_SPI_BRT 0x40 ++#define LTQ_SPI_BRSTAT 0x44 ++#define LTQ_SPI_SFCON 0x60 ++#define LTQ_SPI_SFSTAT 0x64 ++#define LTQ_SPI_GPOCON 0x70 ++#define LTQ_SPI_GPOSTAT 0x74 ++#define LTQ_SPI_FPGO 0x78 ++#define LTQ_SPI_RXREQ 0x80 ++#define LTQ_SPI_RXCNT 0x84 ++#define LTQ_SPI_DMACON 0xec ++#define LTQ_SPI_IRNEN 0xf4 ++#define LTQ_SPI_IRNICR 0xf8 ++#define LTQ_SPI_IRNCR 0xfc ++ ++#define LTQ_SPI_CLC_SMC_S 16 /* Clock divider for sleep mode */ ++#define LTQ_SPI_CLC_SMC_M (0xFF << LTQ_SPI_CLC_SMC_S) ++#define LTQ_SPI_CLC_RMC_S 8 /* Clock divider for normal run mode */ ++#define LTQ_SPI_CLC_RMC_M (0xFF << LTQ_SPI_CLC_RMC_S) ++#define LTQ_SPI_CLC_DISS BIT(1) /* Disable status bit */ ++#define LTQ_SPI_CLC_DISR BIT(0) /* Disable request bit */ ++ ++#define LTQ_SPI_ID_TXFS_S 24 /* Implemented TX FIFO size */ ++#define LTQ_SPI_ID_TXFS_M (0x3F << LTQ_SPI_ID_TXFS_S) ++#define LTQ_SPI_ID_RXFS_S 16 /* Implemented RX FIFO size */ ++#define LTQ_SPI_ID_RXFS_M (0x3F << LTQ_SPI_ID_RXFS_S) ++#define LTQ_SPI_ID_MOD_S 8 /* Module ID */ ++#define LTQ_SPI_ID_MOD_M (0xff << LTQ_SPI_ID_MOD_S) ++#define LTQ_SPI_ID_CFG_S 5 /* DMA interface support */ ++#define LTQ_SPI_ID_CFG_M (1 << LTQ_SPI_ID_CFG_S) ++#define LTQ_SPI_ID_REV_M 0x1F /* Hardware revision number */ ++ ++#define LTQ_SPI_CON_BM_S 16 /* Data width selection */ ++#define LTQ_SPI_CON_BM_M (0x1F << LTQ_SPI_CON_BM_S) ++#define LTQ_SPI_CON_EM BIT(24) /* Echo mode */ ++#define LTQ_SPI_CON_IDLE BIT(23) /* Idle bit value */ ++#define LTQ_SPI_CON_ENBV BIT(22) /* Enable byte valid control */ ++#define LTQ_SPI_CON_RUEN BIT(12) /* Receive underflow error enable */ ++#define LTQ_SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */ ++#define LTQ_SPI_CON_AEN BIT(10) /* Abort error enable */ ++#define LTQ_SPI_CON_REN BIT(9) /* Receive overflow error enable */ ++#define LTQ_SPI_CON_TEN BIT(8) /* Transmit overflow error enable */ ++#define LTQ_SPI_CON_LB BIT(7) /* Loopback control */ ++#define LTQ_SPI_CON_PO BIT(6) /* Clock polarity control */ ++#define LTQ_SPI_CON_PH BIT(5) /* Clock phase control */ ++#define LTQ_SPI_CON_HB BIT(4) /* Heading control */ ++#define LTQ_SPI_CON_RXOFF BIT(1) /* Switch receiver off */ ++#define LTQ_SPI_CON_TXOFF BIT(0) /* Switch transmitter off */ ++ ++#define LTQ_SPI_STAT_RXBV_S 28 ++#define LTQ_SPI_STAT_RXBV_M (0x7 << LTQ_SPI_STAT_RXBV_S) ++#define LTQ_SPI_STAT_BSY BIT(13) /* Busy flag */ ++#define LTQ_SPI_STAT_RUE BIT(12) /* Receive underflow error flag */ ++#define LTQ_SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */ ++#define LTQ_SPI_STAT_AE BIT(10) /* Abort error flag */ ++#define LTQ_SPI_STAT_RE BIT(9) /* Receive error flag */ ++#define LTQ_SPI_STAT_TE BIT(8) /* Transmit error flag */ ++#define LTQ_SPI_STAT_ME BIT(7) /* Mode error flag */ ++#define LTQ_SPI_STAT_MS BIT(1) /* Master/slave select bit */ ++#define LTQ_SPI_STAT_EN BIT(0) /* Enable bit */ ++#define LTQ_SPI_STAT_ERRORS (LTQ_SPI_STAT_ME | LTQ_SPI_STAT_TE | \ ++ LTQ_SPI_STAT_RE | LTQ_SPI_STAT_AE | \ ++ LTQ_SPI_STAT_TUE | LTQ_SPI_STAT_RUE) ++ ++#define LTQ_SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */ ++#define LTQ_SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */ ++#define LTQ_SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */ ++#define LTQ_SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */ ++#define LTQ_SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */ ++#define LTQ_SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */ ++#define LTQ_SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */ ++#define LTQ_SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */ ++#define LTQ_SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */ ++#define LTQ_SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */ ++#define LTQ_SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */ ++#define LTQ_SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */ ++#define LTQ_SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */ ++#define LTQ_SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */ ++#define LTQ_SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */ ++#define LTQ_SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */ ++#define LTQ_SPI_WHBSTATE_CLR_ERRORS (LTQ_SPI_WHBSTATE_CLRRUE | \ ++ LTQ_SPI_WHBSTATE_CLRME | \ ++ LTQ_SPI_WHBSTATE_CLRTE | \ ++ LTQ_SPI_WHBSTATE_CLRRE | \ ++ LTQ_SPI_WHBSTATE_CLRAE | \ ++ LTQ_SPI_WHBSTATE_CLRTUE) ++ ++#define LTQ_SPI_RXFCON_RXFITL_S 8 /* FIFO interrupt trigger level */ ++#define LTQ_SPI_RXFCON_RXFITL_M (0x3F << LTQ_SPI_RXFCON_RXFITL_S) ++#define LTQ_SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */ ++#define LTQ_SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */ ++ ++#define LTQ_SPI_TXFCON_TXFITL_S 8 /* FIFO interrupt trigger level */ ++#define LTQ_SPI_TXFCON_TXFITL_M (0x3F << LTQ_SPI_TXFCON_TXFITL_S) ++#define LTQ_SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */ ++#define LTQ_SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */ ++ ++#define LTQ_SPI_FSTAT_RXFFL_S 0 ++#define LTQ_SPI_FSTAT_RXFFL_M (0x3f << LTQ_SPI_FSTAT_RXFFL_S) ++#define LTQ_SPI_FSTAT_TXFFL_S 8 ++#define LTQ_SPI_FSTAT_TXFFL_M (0x3f << LTQ_SPI_FSTAT_TXFFL_S) ++ ++#define LTQ_SPI_GPOCON_ISCSBN_S 8 ++#define LTQ_SPI_GPOCON_INVOUTN_S 0 ++ ++#define LTQ_SPI_FGPO_SETOUTN_S 8 ++#define LTQ_SPI_FGPO_CLROUTN_S 0 ++ ++#define LTQ_SPI_RXREQ_RXCNT_M 0xFFFF /* Receive count value */ ++#define LTQ_SPI_RXCNT_TODO_M 0xFFFF /* Recevie to-do value */ ++ ++#define LTQ_SPI_IRNEN_TFI BIT(4) /* TX finished interrupt */ ++#define LTQ_SPI_IRNEN_F BIT(3) /* Frame end interrupt request */ ++#define LTQ_SPI_IRNEN_E BIT(2) /* Error end interrupt request */ ++#define LTQ_SPI_IRNEN_T_XWAY BIT(1) /* Transmit end interrupt request */ ++#define LTQ_SPI_IRNEN_R_XWAY BIT(0) /* Receive end interrupt request */ ++#define LTQ_SPI_IRNEN_R_XRX BIT(1) /* Transmit end interrupt request */ ++#define LTQ_SPI_IRNEN_T_XRX BIT(0) /* Receive end interrupt request */ ++#define LTQ_SPI_IRNEN_ALL 0x1F + + struct lantiq_ssc_hwcfg { + unsigned int irnen_r; +@@ -208,16 +212,16 @@ static void lantiq_ssc_maskl(const struc + + static unsigned int tx_fifo_level(const struct lantiq_ssc_spi *spi) + { +- u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT); ++ u32 fstat = lantiq_ssc_readl(spi, LTQ_SPI_FSTAT); + +- return (fstat & SPI_FSTAT_TXFFL_M) >> SPI_FSTAT_TXFFL_S; ++ return (fstat & LTQ_SPI_FSTAT_TXFFL_M) >> LTQ_SPI_FSTAT_TXFFL_S; + } + + static unsigned int rx_fifo_level(const struct lantiq_ssc_spi *spi) + { +- u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT); ++ u32 fstat = lantiq_ssc_readl(spi, LTQ_SPI_FSTAT); + +- return fstat & SPI_FSTAT_RXFFL_M; ++ return fstat & LTQ_SPI_FSTAT_RXFFL_M; + } + + static unsigned int tx_fifo_free(const struct lantiq_ssc_spi *spi) +@@ -227,38 +231,38 @@ static unsigned int tx_fifo_free(const s + + static void rx_fifo_reset(const struct lantiq_ssc_spi *spi) + { +- u32 val = spi->rx_fifo_size << SPI_RXFCON_RXFITL_S; ++ u32 val = spi->rx_fifo_size << LTQ_SPI_RXFCON_RXFITL_S; + +- val |= SPI_RXFCON_RXFEN | SPI_RXFCON_RXFLU; +- lantiq_ssc_writel(spi, val, SPI_RXFCON); ++ val |= LTQ_SPI_RXFCON_RXFEN | LTQ_SPI_RXFCON_RXFLU; ++ lantiq_ssc_writel(spi, val, LTQ_SPI_RXFCON); + } + + static void tx_fifo_reset(const struct lantiq_ssc_spi *spi) + { +- u32 val = 1 << SPI_TXFCON_TXFITL_S; ++ u32 val = 1 << LTQ_SPI_TXFCON_TXFITL_S; + +- val |= SPI_TXFCON_TXFEN | SPI_TXFCON_TXFLU; +- lantiq_ssc_writel(spi, val, SPI_TXFCON); ++ val |= LTQ_SPI_TXFCON_TXFEN | LTQ_SPI_TXFCON_TXFLU; ++ lantiq_ssc_writel(spi, val, LTQ_SPI_TXFCON); + } + + static void rx_fifo_flush(const struct lantiq_ssc_spi *spi) + { +- lantiq_ssc_maskl(spi, 0, SPI_RXFCON_RXFLU, SPI_RXFCON); ++ lantiq_ssc_maskl(spi, 0, LTQ_SPI_RXFCON_RXFLU, LTQ_SPI_RXFCON); + } + + static void tx_fifo_flush(const struct lantiq_ssc_spi *spi) + { +- lantiq_ssc_maskl(spi, 0, SPI_TXFCON_TXFLU, SPI_TXFCON); ++ lantiq_ssc_maskl(spi, 0, LTQ_SPI_TXFCON_TXFLU, LTQ_SPI_TXFCON); + } + + static void hw_enter_config_mode(const struct lantiq_ssc_spi *spi) + { +- lantiq_ssc_writel(spi, SPI_WHBSTATE_CLREN, SPI_WHBSTATE); ++ lantiq_ssc_writel(spi, LTQ_SPI_WHBSTATE_CLREN, LTQ_SPI_WHBSTATE); + } + + static void hw_enter_active_mode(const struct lantiq_ssc_spi *spi) + { +- lantiq_ssc_writel(spi, SPI_WHBSTATE_SETEN, SPI_WHBSTATE); ++ lantiq_ssc_writel(spi, LTQ_SPI_WHBSTATE_SETEN, LTQ_SPI_WHBSTATE); + } + + static void hw_setup_speed_hz(const struct lantiq_ssc_spi *spi, +@@ -287,7 +291,7 @@ static void hw_setup_speed_hz(const stru + dev_dbg(spi->dev, "spi_clk %u, max_speed_hz %u, brt %u\n", + spi_clk, max_speed_hz, brt); + +- lantiq_ssc_writel(spi, brt, SPI_BRT); ++ lantiq_ssc_writel(spi, brt, LTQ_SPI_BRT); + } + + static void hw_setup_bits_per_word(const struct lantiq_ssc_spi *spi, +@@ -296,9 +300,9 @@ static void hw_setup_bits_per_word(const + u32 bm; + + /* CON.BM value = bits_per_word - 1 */ +- bm = (bits_per_word - 1) << SPI_CON_BM_S; ++ bm = (bits_per_word - 1) << LTQ_SPI_CON_BM_S; + +- lantiq_ssc_maskl(spi, SPI_CON_BM_M, bm, SPI_CON); ++ lantiq_ssc_maskl(spi, LTQ_SPI_CON_BM_M, bm, LTQ_SPI_CON); + } + + static void hw_setup_clock_mode(const struct lantiq_ssc_spi *spi, +@@ -315,28 +319,28 @@ static void hw_setup_clock_mode(const st + * 3 1 1 1 0 + */ + if (mode & SPI_CPHA) +- con_clr |= SPI_CON_PH; ++ con_clr |= LTQ_SPI_CON_PH; + else +- con_set |= SPI_CON_PH; ++ con_set |= LTQ_SPI_CON_PH; + + if (mode & SPI_CPOL) +- con_set |= SPI_CON_PO | SPI_CON_IDLE; ++ con_set |= LTQ_SPI_CON_PO | LTQ_SPI_CON_IDLE; + else +- con_clr |= SPI_CON_PO | SPI_CON_IDLE; ++ con_clr |= LTQ_SPI_CON_PO | LTQ_SPI_CON_IDLE; + + /* Set heading control */ + if (mode & SPI_LSB_FIRST) +- con_clr |= SPI_CON_HB; ++ con_clr |= LTQ_SPI_CON_HB; + else +- con_set |= SPI_CON_HB; ++ con_set |= LTQ_SPI_CON_HB; + + /* Set loopback mode */ + if (mode & SPI_LOOP) +- con_set |= SPI_CON_LB; ++ con_set |= LTQ_SPI_CON_LB; + else +- con_clr |= SPI_CON_LB; ++ con_clr |= LTQ_SPI_CON_LB; + +- lantiq_ssc_maskl(spi, con_clr, con_set, SPI_CON); ++ lantiq_ssc_maskl(spi, con_clr, con_set, LTQ_SPI_CON); + } + + static void lantiq_ssc_hw_init(const struct lantiq_ssc_spi *spi) +@@ -347,37 +351,39 @@ static void lantiq_ssc_hw_init(const str + * Set clock divider for run mode to 1 to + * run at same frequency as FPI bus + */ +- lantiq_ssc_writel(spi, 1 << SPI_CLC_RMC_S, SPI_CLC); ++ lantiq_ssc_writel(spi, 1 << LTQ_SPI_CLC_RMC_S, LTQ_SPI_CLC); + + /* Put controller into config mode */ + hw_enter_config_mode(spi); + + /* Clear error flags */ +- lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE); ++ lantiq_ssc_maskl(spi, 0, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE); + + /* Enable error checking, disable TX/RX */ +- lantiq_ssc_writel(spi, SPI_CON_RUEN | SPI_CON_AEN | SPI_CON_TEN | +- SPI_CON_REN | SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON); ++ lantiq_ssc_writel(spi, LTQ_SPI_CON_RUEN | LTQ_SPI_CON_AEN | ++ LTQ_SPI_CON_TEN | LTQ_SPI_CON_REN | LTQ_SPI_CON_TXOFF | ++ LTQ_SPI_CON_RXOFF, LTQ_SPI_CON); + + /* Setup default SPI mode */ + hw_setup_bits_per_word(spi, spi->bits_per_word); + hw_setup_clock_mode(spi, SPI_MODE_0); + + /* Enable master mode and clear error flags */ +- lantiq_ssc_writel(spi, SPI_WHBSTATE_SETMS | SPI_WHBSTATE_CLR_ERRORS, +- SPI_WHBSTATE); ++ lantiq_ssc_writel(spi, LTQ_SPI_WHBSTATE_SETMS | ++ LTQ_SPI_WHBSTATE_CLR_ERRORS, ++ LTQ_SPI_WHBSTATE); + + /* Reset GPIO/CS registers */ +- lantiq_ssc_writel(spi, 0, SPI_GPOCON); +- lantiq_ssc_writel(spi, 0xFF00, SPI_FPGO); ++ lantiq_ssc_writel(spi, 0, LTQ_SPI_GPOCON); ++ lantiq_ssc_writel(spi, 0xFF00, LTQ_SPI_FPGO); + + /* Enable and flush FIFOs */ + rx_fifo_reset(spi); + tx_fifo_reset(spi); + + /* Enable interrupts */ +- lantiq_ssc_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r | SPI_IRNEN_E, +- SPI_IRNEN); ++ lantiq_ssc_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r | ++ LTQ_SPI_IRNEN_E, LTQ_SPI_IRNEN); + } + + static int lantiq_ssc_setup(struct spi_device *spidev) +@@ -400,13 +406,13 @@ static int lantiq_ssc_setup(struct spi_d + } + + /* set GPO pin to CS mode */ +- gpocon = 1 << ((cs - spi->base_cs) + SPI_GPOCON_ISCSBN_S); ++ gpocon = 1 << ((cs - spi->base_cs) + LTQ_SPI_GPOCON_ISCSBN_S); + + /* invert GPO pin */ + if (spidev->mode & SPI_CS_HIGH) + gpocon |= 1 << (cs - spi->base_cs); + +- lantiq_ssc_maskl(spi, 0, gpocon, SPI_GPOCON); ++ lantiq_ssc_maskl(spi, 0, gpocon, LTQ_SPI_GPOCON); + + return 0; + } +@@ -442,18 +448,18 @@ static void hw_setup_transfer(struct lan + } + + /* Configure transmitter and receiver */ +- con = lantiq_ssc_readl(spi, SPI_CON); ++ con = lantiq_ssc_readl(spi, LTQ_SPI_CON); + if (t->tx_buf) +- con &= ~SPI_CON_TXOFF; ++ con &= ~LTQ_SPI_CON_TXOFF; + else +- con |= SPI_CON_TXOFF; ++ con |= LTQ_SPI_CON_TXOFF; + + if (t->rx_buf) +- con &= ~SPI_CON_RXOFF; ++ con &= ~LTQ_SPI_CON_RXOFF; + else +- con |= SPI_CON_RXOFF; ++ con |= LTQ_SPI_CON_RXOFF; + +- lantiq_ssc_writel(spi, con, SPI_CON); ++ lantiq_ssc_writel(spi, con, LTQ_SPI_CON); + } + + static int lantiq_ssc_unprepare_message(struct spi_master *master, +@@ -464,7 +470,8 @@ static int lantiq_ssc_unprepare_message( + flush_workqueue(spi->wq); + + /* Disable transmitter and receiver while idle */ +- lantiq_ssc_maskl(spi, 0, SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON); ++ lantiq_ssc_maskl(spi, 0, LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF, ++ LTQ_SPI_CON); + + return 0; + } +@@ -503,7 +510,7 @@ static void tx_fifo_write(struct lantiq_ + break; + } + +- lantiq_ssc_writel(spi, data, SPI_TB); ++ lantiq_ssc_writel(spi, data, LTQ_SPI_TB); + tx_free--; + } + } +@@ -517,7 +524,7 @@ static void rx_fifo_read_full_duplex(str + unsigned int rx_fill = rx_fifo_level(spi); + + while (rx_fill) { +- data = lantiq_ssc_readl(spi, SPI_RB); ++ data = lantiq_ssc_readl(spi, LTQ_SPI_RB); + + switch (spi->bits_per_word) { + case 2 ... 8: +@@ -563,9 +570,9 @@ static void rx_fifo_read_half_duplex(str + */ + while (rx_fill) { + if (spi->rx_todo < 4) { +- rxbv = (lantiq_ssc_readl(spi, SPI_STAT) & +- SPI_STAT_RXBV_M) >> SPI_STAT_RXBV_S; +- data = lantiq_ssc_readl(spi, SPI_RB); ++ rxbv = (lantiq_ssc_readl(spi, LTQ_SPI_STAT) & ++ LTQ_SPI_STAT_RXBV_M) >> LTQ_SPI_STAT_RXBV_S; ++ data = lantiq_ssc_readl(spi, LTQ_SPI_RB); + + shift = (rxbv - 1) * 8; + rx8 = spi->rx; +@@ -578,7 +585,7 @@ static void rx_fifo_read_half_duplex(str + spi->rx++; + } + } else { +- data = lantiq_ssc_readl(spi, SPI_RB); ++ data = lantiq_ssc_readl(spi, LTQ_SPI_RB); + rx32 = (u32 *) spi->rx; + + *rx32++ = data; +@@ -603,7 +610,7 @@ static void rx_request(struct lantiq_ssc + if (rxreq > rxreq_max) + rxreq = rxreq_max; + +- lantiq_ssc_writel(spi, rxreq, SPI_RXREQ); ++ lantiq_ssc_writel(spi, rxreq, LTQ_SPI_RXREQ); + } + + static irqreturn_t lantiq_ssc_xmit_interrupt(int irq, void *data) +@@ -642,26 +649,26 @@ completed: + static irqreturn_t lantiq_ssc_err_interrupt(int irq, void *data) + { + struct lantiq_ssc_spi *spi = data; +- u32 stat = lantiq_ssc_readl(spi, SPI_STAT); ++ u32 stat = lantiq_ssc_readl(spi, LTQ_SPI_STAT); + +- if (!(stat & SPI_STAT_ERRORS)) ++ if (!(stat & LTQ_SPI_STAT_ERRORS)) + return IRQ_NONE; + +- if (stat & SPI_STAT_RUE) ++ if (stat & LTQ_SPI_STAT_RUE) + dev_err(spi->dev, "receive underflow error\n"); +- if (stat & SPI_STAT_TUE) ++ if (stat & LTQ_SPI_STAT_TUE) + dev_err(spi->dev, "transmit underflow error\n"); +- if (stat & SPI_STAT_AE) ++ if (stat & LTQ_SPI_STAT_AE) + dev_err(spi->dev, "abort error\n"); +- if (stat & SPI_STAT_RE) ++ if (stat & LTQ_SPI_STAT_RE) + dev_err(spi->dev, "receive overflow error\n"); +- if (stat & SPI_STAT_TE) ++ if (stat & LTQ_SPI_STAT_TE) + dev_err(spi->dev, "transmit overflow error\n"); +- if (stat & SPI_STAT_ME) ++ if (stat & LTQ_SPI_STAT_ME) + dev_err(spi->dev, "mode error\n"); + + /* Clear error flags */ +- lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE); ++ lantiq_ssc_maskl(spi, 0, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE); + + /* set bad status so it can be retried */ + if (spi->master->cur_msg) +@@ -721,9 +728,9 @@ static void lantiq_ssc_bussy_work(struct + + end = jiffies + msecs_to_jiffies(timeout); + do { +- u32 stat = lantiq_ssc_readl(spi, SPI_STAT); ++ u32 stat = lantiq_ssc_readl(spi, LTQ_SPI_STAT); + +- if (!(stat & SPI_STAT_BSY)) { ++ if (!(stat & LTQ_SPI_STAT_BSY)) { + spi_finalize_current_transfer(spi->master); + return; + } +@@ -755,9 +762,9 @@ static void lantiq_ssc_set_cs(struct spi + if (!!(spidev->mode & SPI_CS_HIGH) == enable) + fgpo = (1 << (cs - spi->base_cs)); + else +- fgpo = (1 << (cs - spi->base_cs + SPI_FGPO_SETOUTN_S)); ++ fgpo = (1 << (cs - spi->base_cs + LTQ_SPI_FGPO_SETOUTN_S)); + +- lantiq_ssc_writel(spi, fgpo, SPI_FPGO); ++ lantiq_ssc_writel(spi, fgpo, LTQ_SPI_FPGO); + } + + static int lantiq_ssc_transfer_one(struct spi_master *master, +@@ -772,13 +779,13 @@ static int lantiq_ssc_transfer_one(struc + } + + static const struct lantiq_ssc_hwcfg lantiq_ssc_xway = { +- .irnen_r = SPI_IRNEN_R_XWAY, +- .irnen_t = SPI_IRNEN_T_XWAY, ++ .irnen_r = LTQ_SPI_IRNEN_R_XWAY, ++ .irnen_t = LTQ_SPI_IRNEN_T_XWAY, + }; + + static const struct lantiq_ssc_hwcfg lantiq_ssc_xrx = { +- .irnen_r = SPI_IRNEN_R_XRX, +- .irnen_t = SPI_IRNEN_T_XRX, ++ .irnen_r = LTQ_SPI_IRNEN_R_XRX, ++ .irnen_t = LTQ_SPI_IRNEN_T_XRX, + }; + + static const struct of_device_id lantiq_ssc_match[] = { +@@ -814,21 +821,21 @@ static int lantiq_ssc_probe(struct platf + return -ENXIO; + } + +- rx_irq = platform_get_irq_byname(pdev, SPI_RX_IRQ_NAME); ++ rx_irq = platform_get_irq_byname(pdev, LTQ_SPI_RX_IRQ_NAME); + if (rx_irq < 0) { +- dev_err(dev, "failed to get %s\n", SPI_RX_IRQ_NAME); ++ dev_err(dev, "failed to get %s\n", LTQ_SPI_RX_IRQ_NAME); + return -ENXIO; + } + +- tx_irq = platform_get_irq_byname(pdev, SPI_TX_IRQ_NAME); ++ tx_irq = platform_get_irq_byname(pdev, LTQ_SPI_TX_IRQ_NAME); + if (tx_irq < 0) { +- dev_err(dev, "failed to get %s\n", SPI_TX_IRQ_NAME); ++ dev_err(dev, "failed to get %s\n", LTQ_SPI_TX_IRQ_NAME); + return -ENXIO; + } + +- err_irq = platform_get_irq_byname(pdev, SPI_ERR_IRQ_NAME); ++ err_irq = platform_get_irq_byname(pdev, LTQ_SPI_ERR_IRQ_NAME); + if (err_irq < 0) { +- dev_err(dev, "failed to get %s\n", SPI_ERR_IRQ_NAME); ++ dev_err(dev, "failed to get %s\n", LTQ_SPI_ERR_IRQ_NAME); + return -ENXIO; + } + +@@ -849,17 +856,17 @@ static int lantiq_ssc_probe(struct platf + } + + err = devm_request_irq(dev, rx_irq, lantiq_ssc_xmit_interrupt, +- 0, SPI_RX_IRQ_NAME, spi); ++ 0, LTQ_SPI_RX_IRQ_NAME, spi); + if (err) + goto err_master_put; + + err = devm_request_irq(dev, tx_irq, lantiq_ssc_xmit_interrupt, +- 0, SPI_TX_IRQ_NAME, spi); ++ 0, LTQ_SPI_TX_IRQ_NAME, spi); + if (err) + goto err_master_put; + + err = devm_request_irq(dev, err_irq, lantiq_ssc_err_interrupt, +- 0, SPI_ERR_IRQ_NAME, spi); ++ 0, LTQ_SPI_ERR_IRQ_NAME, spi); + if (err) + goto err_master_put; + +@@ -916,11 +923,11 @@ static int lantiq_ssc_probe(struct platf + } + INIT_WORK(&spi->work, lantiq_ssc_bussy_work); + +- id = lantiq_ssc_readl(spi, SPI_ID); +- spi->tx_fifo_size = (id & SPI_ID_TXFS_M) >> SPI_ID_TXFS_S; +- spi->rx_fifo_size = (id & SPI_ID_RXFS_M) >> SPI_ID_RXFS_S; +- supports_dma = (id & SPI_ID_CFG_M) >> SPI_ID_CFG_S; +- revision = id & SPI_ID_REV_M; ++ id = lantiq_ssc_readl(spi, LTQ_SPI_ID); ++ spi->tx_fifo_size = (id & LTQ_SPI_ID_TXFS_M) >> LTQ_SPI_ID_TXFS_S; ++ spi->rx_fifo_size = (id & LTQ_SPI_ID_RXFS_M) >> LTQ_SPI_ID_RXFS_S; ++ supports_dma = (id & LTQ_SPI_ID_CFG_M) >> LTQ_SPI_ID_CFG_S; ++ revision = id & LTQ_SPI_ID_REV_M; + + lantiq_ssc_hw_init(spi); + +@@ -952,8 +959,8 @@ static int lantiq_ssc_remove(struct plat + { + struct lantiq_ssc_spi *spi = platform_get_drvdata(pdev); + +- lantiq_ssc_writel(spi, 0, SPI_IRNEN); +- lantiq_ssc_writel(spi, 0, SPI_CLC); ++ lantiq_ssc_writel(spi, 0, LTQ_SPI_IRNEN); ++ lantiq_ssc_writel(spi, 0, LTQ_SPI_CLC); + rx_fifo_flush(spi); + tx_fifo_flush(spi); + hw_enter_config_mode(spi);