From: Birger Koblitz Date: Fri, 31 Dec 2021 10:56:49 +0000 (+0100) Subject: realtek: Add VPE support for the IRQ driver X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=6c18e9c491959ac0674ebe36b09f9ddc3f2c9bce;p=openwrt%2Fstaging%2Faparcar.git realtek: Add VPE support for the IRQ driver In order to support VSMP, enable support for both VPEs of the RTL839X and RTL930X SoCs in the irq-realtek-rtl driver. Add support for IRQ affinity setting. Signed-off-by: Birger Koblitz --- diff --git a/target/linux/realtek/patches-5.10/315-irqchip-irq-realtek-rtl-add-VPE-support.patch b/target/linux/realtek/patches-5.10/315-irqchip-irq-realtek-rtl-add-VPE-support.patch new file mode 100644 index 0000000000..09252068b2 --- /dev/null +++ b/target/linux/realtek/patches-5.10/315-irqchip-irq-realtek-rtl-add-VPE-support.patch @@ -0,0 +1,393 @@ +--- a/drivers/irqchip/irq-realtek-rtl.c ++++ b/drivers/irqchip/irq-realtek-rtl.c +@@ -21,21 +21,63 @@ + #define RTL_ICTL_IRR2 0x10 + #define RTL_ICTL_IRR3 0x14 + +-#define REG(x) (realtek_ictl_base + x) ++#define RTL_ICTL_NUM_INPUTS 32 ++#define RTL_ICTL_NUM_OUTPUTS 15 + + static DEFINE_RAW_SPINLOCK(irq_lock); +-static void __iomem *realtek_ictl_base; ++ ++#define REG(offset, cpu) (realtek_ictl_base[cpu] + offset) ++ ++static void __iomem *realtek_ictl_base[NR_CPUS]; ++static cpumask_t realtek_ictl_cpu_configurable; ++ ++struct realtek_ictl_output { ++ /* IRQ controller data */ ++ struct fwnode_handle *fwnode; ++ /* Output specific data */ ++ unsigned int output_index; ++ struct irq_domain *domain; ++ u32 child_mask; ++}; ++ ++/* ++ * IRR0-IRR3 store 4 bits per interrupt, but Realtek uses inverted numbering, ++ * placing IRQ 31 in the first four bits. A routing value of '0' means the ++ * interrupt is left disconnected. Routing values {1..15} connect to output ++ * lines {0..14}. ++ */ ++#define IRR_OFFSET(idx) (4 * (3 - (idx * 4) / 32)) ++#define IRR_SHIFT(idx) ((idx * 4) % 32) ++ ++static inline u32 read_irr(void __iomem *irr0, int idx) ++{ ++ return (readl(irr0 + IRR_OFFSET(idx)) >> IRR_SHIFT(idx)) & 0xf; ++} ++ ++static inline void write_irr(void __iomem *irr0, int idx, u32 value) ++{ ++ unsigned int offset = IRR_OFFSET(idx); ++ unsigned int shift = IRR_SHIFT(idx); ++ u32 irr; ++ ++ irr = readl(irr0 + offset) & ~(0xf << shift); ++ irr |= (value & 0xf) << shift; ++ writel(irr, irr0 + offset); ++} + + static void realtek_ictl_unmask_irq(struct irq_data *i) + { + unsigned long flags; + u32 value; ++ int cpu; + + raw_spin_lock_irqsave(&irq_lock, flags); + +- value = readl(REG(RTL_ICTL_GIMR)); +- value |= BIT(i->hwirq); +- writel(value, REG(RTL_ICTL_GIMR)); ++ for_each_cpu(cpu, &realtek_ictl_cpu_configurable) { ++ value = readl(REG(RTL_ICTL_GIMR, cpu)); ++ value |= BIT(i->hwirq); ++ writel(value, REG(RTL_ICTL_GIMR, cpu)); ++ } + + raw_spin_unlock_irqrestore(&irq_lock, flags); + } +@@ -44,137 +86,247 @@ static void realtek_ictl_mask_irq(struct + { + unsigned long flags; + u32 value; ++ int cpu; + + raw_spin_lock_irqsave(&irq_lock, flags); + +- value = readl(REG(RTL_ICTL_GIMR)); +- value &= ~BIT(i->hwirq); +- writel(value, REG(RTL_ICTL_GIMR)); ++ for_each_cpu(cpu, &realtek_ictl_cpu_configurable) { ++ value = readl(REG(RTL_ICTL_GIMR, cpu)); ++ value &= ~BIT(i->hwirq); ++ writel(value, REG(RTL_ICTL_GIMR, cpu)); ++ } + + raw_spin_unlock_irqrestore(&irq_lock, flags); + } + ++static int __maybe_unused realtek_ictl_irq_affinity(struct irq_data *i, ++ const struct cpumask *dest, bool force) ++{ ++ struct realtek_ictl_output *output = i->domain->host_data; ++ cpumask_t cpu_configure; ++ cpumask_t cpu_disable; ++ cpumask_t cpu_enable; ++ unsigned long flags; ++ int cpu; ++ ++ raw_spin_lock_irqsave(&irq_lock, flags); ++ ++ cpumask_and(&cpu_configure, cpu_present_mask, &realtek_ictl_cpu_configurable); ++ ++ cpumask_and(&cpu_enable, &cpu_configure, dest); ++ cpumask_andnot(&cpu_disable, &cpu_configure, dest); ++ ++ for_each_cpu(cpu, &cpu_disable) ++ write_irr(REG(RTL_ICTL_IRR0, cpu), i->hwirq, 0); ++ ++ for_each_cpu(cpu, &cpu_enable) ++ write_irr(REG(RTL_ICTL_IRR0, cpu), i->hwirq, output->output_index + 1); ++ ++ irq_data_update_effective_affinity(i, &cpu_enable); ++ ++ raw_spin_unlock_irqrestore(&irq_lock, flags); ++ ++ return IRQ_SET_MASK_OK; ++} ++ + static struct irq_chip realtek_ictl_irq = { + .name = "realtek-rtl-intc", + .irq_mask = realtek_ictl_mask_irq, + .irq_unmask = realtek_ictl_unmask_irq, ++#ifdef CONFIG_SMP ++ .irq_set_affinity = realtek_ictl_irq_affinity, ++#endif + }; + + static int intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) + { +- irq_set_chip_and_handler(hw, &realtek_ictl_irq, handle_level_irq); ++ struct realtek_ictl_output *output = d->host_data; ++ unsigned long flags; ++ ++ irq_set_chip_and_handler(irq, &realtek_ictl_irq, handle_level_irq); ++ ++ raw_spin_lock_irqsave(&irq_lock, flags); ++ ++ output->child_mask |= BIT(hw); ++ write_irr(REG(RTL_ICTL_IRR0, 0), hw, output->output_index + 1); ++ ++ raw_spin_unlock_irqrestore(&irq_lock, flags); + + return 0; + } + ++static int intc_select(struct irq_domain *d, struct irq_fwspec *fwspec, ++ enum irq_domain_bus_token bus_token) ++{ ++ struct realtek_ictl_output *output = d->host_data; ++ bool routed_elsewhere; ++ unsigned long flags; ++ u32 routing_old; ++ int cpu; ++ ++ if (fwspec->fwnode != output->fwnode) ++ return false; ++ ++ /* Original specifiers had only one parameter */ ++ if (fwspec->param_count < 2) ++ return true; ++ ++ raw_spin_lock_irqsave(&irq_lock, flags); ++ ++ /* ++ * Inputs can only be routed to one output, so they shouldn't be ++ * allowed to end up in multiple domains. ++ */ ++ for_each_cpu(cpu, &realtek_ictl_cpu_configurable) { ++ routing_old = read_irr(REG(RTL_ICTL_IRR0, cpu), fwspec->param[0]); ++ routed_elsewhere = routing_old && fwspec->param[1] != routing_old - 1; ++ if (routed_elsewhere) { ++ pr_warn("soc int %d already routed to output %d\n", ++ fwspec->param[0], routing_old - 1); ++ break; ++ } ++ } ++ ++ raw_spin_unlock_irqrestore(&irq_lock, flags); ++ ++ return !routed_elsewhere && fwspec->param[1] == output->output_index; ++} ++ + static const struct irq_domain_ops irq_domain_ops = { + .map = intc_map, ++ .select = intc_select, + .xlate = irq_domain_xlate_onecell, + }; + + static void realtek_irq_dispatch(struct irq_desc *desc) + { ++ struct realtek_ictl_output *output = irq_desc_get_handler_data(desc); + struct irq_chip *chip = irq_desc_get_chip(desc); +- struct irq_domain *domain; +- unsigned int pending; ++ int cpu = smp_processor_id(); ++ unsigned long pending; ++ unsigned int soc_int; + + chained_irq_enter(chip, desc); +- pending = readl(REG(RTL_ICTL_GIMR)) & readl(REG(RTL_ICTL_GISR)); ++ pending = readl(REG(RTL_ICTL_GIMR, cpu)) & readl(REG(RTL_ICTL_GISR, cpu)) ++ & output->child_mask; ++ + if (unlikely(!pending)) { + spurious_interrupt(); + goto out; + } +- domain = irq_desc_get_handler_data(desc); +- generic_handle_irq(irq_find_mapping(domain, __ffs(pending))); ++ ++ for_each_set_bit(soc_int, &pending, RTL_ICTL_NUM_INPUTS) ++ generic_handle_irq(irq_find_mapping(output->domain, soc_int)); ++// generic_handle_domain_irq(output->domain, soc_int); + + out: + chained_irq_exit(chip, desc); + } + +-/* +- * SoC interrupts are cascaded to MIPS CPU interrupts according to the +- * interrupt-map in the device tree. Each SoC interrupt gets 4 bits for +- * the CPU interrupt in an Interrupt Routing Register. Max 32 SoC interrupts +- * thus go into 4 IRRs. +- */ +-static int __init map_interrupts(struct device_node *node, struct irq_domain *domain) ++static int __init setup_parent_interrupts(struct device_node *node, int *parents, ++ unsigned int num_parents) + { +- struct device_node *cpu_ictl; +- const __be32 *imap; +- u32 imaplen, soc_int, cpu_int, tmp, regs[4]; +- int ret, i, irr_regs[] = { +- RTL_ICTL_IRR3, +- RTL_ICTL_IRR2, +- RTL_ICTL_IRR1, +- RTL_ICTL_IRR0, +- }; +- u8 mips_irqs_set; ++ struct realtek_ictl_output *outputs; ++ struct realtek_ictl_output *output; ++ struct irq_domain *domain; ++ unsigned int p; + +- ret = of_property_read_u32(node, "#address-cells", &tmp); +- if (ret || tmp) +- return -EINVAL; ++ outputs = kcalloc(num_parents, sizeof(*outputs), GFP_KERNEL); ++ if (!outputs) ++ return -ENOMEM; + +- imap = of_get_property(node, "interrupt-map", &imaplen); +- if (!imap || imaplen % 3) +- return -EINVAL; ++ for (p = 0; p < num_parents; p++) { ++ output = outputs + p; + +- mips_irqs_set = 0; +- memset(regs, 0, sizeof(regs)); +- for (i = 0; i < imaplen; i += 3 * sizeof(u32)) { +- soc_int = be32_to_cpup(imap); +- if (soc_int > 31) +- return -EINVAL; +- +- cpu_ictl = of_find_node_by_phandle(be32_to_cpup(imap + 1)); +- if (!cpu_ictl) +- return -EINVAL; +- ret = of_property_read_u32(cpu_ictl, "#interrupt-cells", &tmp); +- if (ret || tmp != 1) +- return -EINVAL; +- of_node_put(cpu_ictl); +- +- cpu_int = be32_to_cpup(imap + 2); +- if (cpu_int > 7) +- return -EINVAL; +- +- if (!(mips_irqs_set & BIT(cpu_int))) { +- irq_set_chained_handler_and_data(cpu_int, realtek_irq_dispatch, +- domain); +- mips_irqs_set |= BIT(cpu_int); +- } ++ domain = irq_domain_add_linear(node, RTL_ICTL_NUM_INPUTS, &irq_domain_ops, output); ++ if (!domain) ++ goto domain_err; + +- regs[(soc_int * 4) / 32] |= cpu_int << (soc_int * 4) % 32; +- imap += 3; +- } ++ output->fwnode = of_node_to_fwnode(node); ++ output->output_index = p; ++ output->domain = domain; + +- for (i = 0; i < 4; i++) +- writel(regs[i], REG(irr_regs[i])); ++ irq_set_chained_handler_and_data(parents[p], realtek_irq_dispatch, output); ++ } + + return 0; ++ ++domain_err: ++ while (p--) { ++ irq_set_chained_handler_and_data(parents[p], NULL, NULL); ++ irq_domain_remove(outputs[p].domain); ++ } ++ ++ kfree(outputs); ++ ++ return -ENOMEM; + } + + static int __init realtek_rtl_of_init(struct device_node *node, struct device_node *parent) + { +- struct irq_domain *domain; +- int ret; ++ int parent_irqs[RTL_ICTL_NUM_OUTPUTS]; ++ struct of_phandle_args oirq; ++ unsigned int num_parents; ++ unsigned int soc_irq; ++ unsigned int p; ++ int cpu; ++ ++ cpumask_clear(&realtek_ictl_cpu_configurable); ++ ++ for (cpu = 0; cpu < NR_CPUS; cpu++) { ++ realtek_ictl_base[cpu] = of_iomap(node, cpu); ++ if (realtek_ictl_base[cpu]) { ++ cpumask_set_cpu(cpu, &realtek_ictl_cpu_configurable); ++ ++ /* Disable all cascaded interrupts and clear routing */ ++ writel(0, REG(RTL_ICTL_GIMR, cpu)); ++ for (soc_irq = 0; soc_irq < RTL_ICTL_NUM_INPUTS; soc_irq++) ++ write_irr(REG(RTL_ICTL_IRR0, cpu), soc_irq, 0); ++ } ++ } + +- realtek_ictl_base = of_iomap(node, 0); +- if (!realtek_ictl_base) ++ if (cpumask_empty(&realtek_ictl_cpu_configurable)) + return -ENXIO; + +- /* Disable all cascaded interrupts */ +- writel(0, REG(RTL_ICTL_GIMR)); ++ num_parents = of_irq_count(node); ++ if (num_parents > RTL_ICTL_NUM_OUTPUTS) { ++ pr_err("too many parent interrupts\n"); ++ return -EINVAL; ++ } + +- domain = irq_domain_add_simple(node, 32, 0, +- &irq_domain_ops, NULL); ++ for (p = 0; p < num_parents; p++) ++ parent_irqs[p] = of_irq_get(node, p); + +- ret = map_interrupts(node, domain); +- if (ret) { +- pr_err("invalid interrupt map\n"); +- return ret; ++ if (WARN_ON(!num_parents)) { ++ /* ++ * If DT contains no parent interrupts, assume MIPS CPU IRQ 2 ++ * (HW0) is connected to the first output. This is the case for ++ * all known hardware anyway. "interrupt-map" is deprecated, so ++ * don't bother trying to parse that. ++ * Since this is to account for old devicetrees with one-cell ++ * interrupt specifiers, only one output domain is needed. ++ */ ++ oirq.np = of_find_compatible_node(NULL, NULL, "mti,cpu-interrupt-controller"); ++ if (oirq.np) { ++ oirq.args_count = 1; ++ oirq.args[0] = 2; ++ ++ parent_irqs[0] = irq_create_of_mapping(&oirq); ++ num_parents = 1; ++ } ++ ++ of_node_put(oirq.np); + } + +- return 0; ++ /* Ensure we haven't collected any errors before proceeding */ ++ for (p = 0; p < num_parents; p++) { ++ if (parent_irqs[p] < 0) ++ return parent_irqs[p]; ++ if (!parent_irqs[p]) ++ return -ENODEV; ++ } ++ ++ return setup_parent_interrupts(node, &parent_irqs[0], num_parents); + } + + IRQCHIP_DECLARE(realtek_rtl_intc, "realtek,rtl-intc", realtek_rtl_of_init);