From: David Santamaría Rogado Date: Thu, 28 Feb 2019 21:08:48 +0000 (+0100) Subject: ath79: TP-Link Archer C7 v4 swap usb led names X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=6c558bae648ea8bca8fc8fcbee760a0cdc9ca9c9;p=openwrt%2Fstaging%2Fjow.git ath79: TP-Link Archer C7 v4 swap usb led names Commit 34b10b46 made usb match with the corresponding usb label. The problem is that v4 seems to use in stock firmware the upper led for usb 1 and the lower led for usb 2. The led assigned varies between TP-Link models and even same model versions. For example, Archer C7 v1 and v2 have the leds in the reverse order. Revert 34b10b46 and swap led labels instead, now usb port and led label match and also respect the original behavior. Tested-by: Oldrich Jedlicka Signed-off-by: David Santamaría Rogado --- diff --git a/target/linux/ath79/dts/qca9563_tplink_archer-c7-v4.dts b/target/linux/ath79/dts/qca9563_tplink_archer-c7-v4.dts index 94411f2116..db8869cf16 100644 --- a/target/linux/ath79/dts/qca9563_tplink_archer-c7-v4.dts +++ b/target/linux/ath79/dts/qca9563_tplink_archer-c7-v4.dts @@ -68,14 +68,14 @@ usb1 { label = "tp-link:green:usb1"; - gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; trigger-sources = <&hub_port1>; linux,default-trigger = "usbport"; }; usb2 { label = "tp-link:green:usb2"; - gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; trigger-sources = <&hub_port0>; linux,default-trigger = "usbport"; };