From: Archit Taneja Date: Tue, 1 Dec 2015 06:18:15 +0000 (+0530) Subject: dt-bindings: msm/dsi: Add DSIv2 documentation X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=6dc1341044952004daeb10212b685c180fb7780a;p=openwrt%2Fstaging%2Fblogic.git dt-bindings: msm/dsi: Add DSIv2 documentation Add additional property info needed for DSIv2 DT. Cc: devicetree@vger.kernel.org Cc: Rob Herring Acked-by: Rob Herring Signed-off-by: Archit Taneja Signed-off-by: Rob Clark --- diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt index e097955516f0..e7423bea1424 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi.txt +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt @@ -21,10 +21,13 @@ Required properties: * "byte_clk" * "pixel_clk" * "core_clk" + For DSIv2, we need an additional clock: + * "src_clk" - vdd-supply: phandle to vdd regulator device node - vddio-supply: phandle to vdd-io regulator device node - vdda-supply: phandle to vdda regulator device node - qcom,dsi-phy: phandle to DSI PHY device node +- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2) Optional properties: - panel@0: Node of panel connected to this DSI controller. @@ -51,6 +54,7 @@ Required properties: * "qcom,dsi-phy-28nm-hpm" * "qcom,dsi-phy-28nm-lp" * "qcom,dsi-phy-20nm" + * "qcom,dsi-phy-28nm-8960" - reg: Physical base address and length of the registers of PLL, PHY and PHY regulator - reg-names: The names of register regions. The following regions are required: