From: Jan Forman <jforman@tuta.io>
Date: Sat, 15 May 2021 18:51:14 +0000 (+0200)
Subject: ath79: Create shared dtsi for DIR-859
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=6ea910ab54ffc0640f4e7fc977c1e076f4e86323;p=openwrt%2Fstaging%2Fblocktrron.git

ath79: Create shared dtsi for DIR-859

Create a shared dtsi for the dir-859 and similarly device, it similarly as it done for the dir-842.

Signed-off-by: Jan Forman <jforman@tuta.io>
---

diff --git a/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts b/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts
index 140f0b65c6..a828f86cb1 100644
--- a/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts
+++ b/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts
@@ -1,9 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "qca956x.dtsi"
-
+#include "qca9563_dlink_dir-8x9-a1.dtsi"
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
 
 / {
 	model = "D-Link DIR-859 A1";
@@ -40,113 +38,4 @@
 			linux,default-trigger = "phy0tpt";
 		};
 	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		wps {
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-			debounce-interval = <60>;
-		};
-
-		reset {
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-			debounce-interval = <60>;
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&spi {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <50000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "bootloader";
-				reg = <0x000000 0x40000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "bdcfg";
-				reg = <0x040000 0x10000>;
-				read-only;
-			};
-
-			partition@50000 {
-				label = "devdata";
-				reg = <0x050000 0x10000>;
-				read-only;
-			};
-
-			partition@60000 {
-				label = "devconf";
-				reg = <0x060000 0x10000>;
-				read-only;
-			};
-
-			partition@70000 {
-				compatible = "seama";
-				label = "firmware";
-				reg = <0x070000 0xf80000>;
-			};
-
-			art: partition@ff0000 {
-				label = "art";
-				reg = <0xff0000 0x010000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&mdio0 {
-	status = "okay";
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		phy-mode = "sgmii";
-		qca,mib-poll-interval = <500>;
-
-		reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-
-		qca,ar8327-initvals = <
-			0x04 0x00080080 /* PORT0 PAD MODE CTRL */
-			0x10 0x81000080 /* POWER_ON_STRAP */
-			0x50 0xcc35cc35 /* LED_CTRL0 */
-			0x54 0xcb37cb37 /* LED_CTRL1 */
-			0x58 0x00000000 /* LED_CTRL2 */
-			0x5c 0x00f3cf00 /* LED_CTRL3 */
-			0x7c 0x0000007e /* PORT0_STATUS */
-			>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	pll-data = <0x03000101 0x00000101 0x00001919>;
-
-	phy-mode = "sgmii";
-	phy-handle = <&phy0>;
-};
-
-&wmac {
-	status = "okay";
-
-	qca,no-eeprom;
 };
diff --git a/target/linux/ath79/dts/qca9563_dlink_dir-8x9-a1.dtsi b/target/linux/ath79/dts/qca9563_dlink_dir-8x9-a1.dtsi
new file mode 100644
index 0000000000..65948ecb22
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_dlink_dir-8x9-a1.dtsi
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+
+	keys {
+		compatible = "gpio-keys";
+
+		wps {
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+
+		reset {
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&spi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bootloader";
+				reg = <0x000000 0x40000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "bdcfg";
+				reg = <0x040000 0x10000>;
+				read-only;
+			};
+
+			partition@50000 {
+				label = "devdata";
+				reg = <0x050000 0x10000>;
+				read-only;
+			};
+
+			partition@60000 {
+				label = "devconf";
+				reg = <0x060000 0x10000>;
+				read-only;
+			};
+
+			partition@70000 {
+				compatible = "seama";
+				label = "firmware";
+				reg = <0x070000 0xf80000>;
+			};
+
+			art: partition@ff0000 {
+				label = "art";
+				reg = <0xff0000 0x010000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		phy-mode = "sgmii";
+		qca,mib-poll-interval = <500>;
+
+		reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+
+		qca,ar8327-initvals = <
+			0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+			0x10 0x81000080 /* POWER_ON_STRAP */
+			0x50 0xcc35cc35 /* LED_CTRL0 */
+			0x54 0xcb37cb37 /* LED_CTRL1 */
+			0x58 0x00000000 /* LED_CTRL2 */
+			0x5c 0x00f3cf00 /* LED_CTRL3 */
+			0x7c 0x0000007e /* PORT0_STATUS */
+			>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	pll-data = <0x03000101 0x00000101 0x00001919>;
+
+	phy-mode = "sgmii";
+	phy-handle = <&phy0>;
+};
+
+&wmac {
+	status = "okay";
+
+	qca,no-eeprom;
+};