From: Christian Marangi Date: Thu, 15 Sep 2022 02:01:22 +0000 (+0200) Subject: ipq806x: 5.15: add krait-cc modernization patch and fixup X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=6f1b89babaa519afbbd8ea7f7d1cbcc855dbb31c;p=openwrt%2Fstaging%2Fwigyori.git ipq806x: 5.15: add krait-cc modernization patch and fixup Add multiple patch for krait-cc modernization and multiple fixup for the driver. Also modify a patch to enable the qsb fixed clock and add pxo to krait-cc node. Signed-off-by: Christian Marangi --- diff --git a/target/linux/ipq806x/patches-5.15/107-10-ARM-dts-qcom-add-saw-for-l2-cache-and-kraitcc-for.patch b/target/linux/ipq806x/patches-5.15/107-10-ARM-dts-qcom-add-saw-for-l2-cache-and-kraitcc-for.patch index 12e4874f6b..418d6b26ce 100644 --- a/target/linux/ipq806x/patches-5.15/107-10-ARM-dts-qcom-add-saw-for-l2-cache-and-kraitcc-for.patch +++ b/target/linux/ipq806x/patches-5.15/107-10-ARM-dts-qcom-add-saw-for-l2-cache-and-kraitcc-for.patch @@ -20,11 +20,11 @@ Tested-by: Jonathan McDowell }; clocks { -+// qsb: qsb { -+// compatible = "fixed-clock"; -+// clock-frequency = <384000000>; -+// #clock-cells = <0>; -+// }; ++ qsb: qsb { ++ compatible = "fixed-clock"; ++ clock-frequency = <225000000>; ++ #clock-cells = <0>; ++ }; + cxo_board: cxo_board { compatible = "fixed-clock"; @@ -85,10 +85,10 @@ Tested-by: Jonathan McDowell + kraitcc: clock-controller { + compatible = "qcom,krait-cc-v1"; + clocks = <&gcc PLL9>, <&gcc PLL10>, <&gcc PLL12>, -+ <&acc0>, <&acc1>, <&l2cc>; // <&qsb> ++ <&acc0>, <&acc1>, <&l2cc>, <&qsb>, <&pxo_board>; + clock-names = "hfpll0", "hfpll1", "hfpll_l2", -+ "acpu0_aux", "acpu1_aux", "acpu_l2_aux"; -+// "qsb"; ++ "acpu0_aux", "acpu1_aux", "acpu_l2_aux", ++ "qsb", "pxo"; + #clock-cells = <1>; }; diff --git a/target/linux/ipq806x/patches-5.15/121-01-clk-qcom-kpss-xcc-register-it-as-clk-provider.patch b/target/linux/ipq806x/patches-5.15/121-01-clk-qcom-kpss-xcc-register-it-as-clk-provider.patch new file mode 100644 index 0000000000..36716591f0 --- /dev/null +++ b/target/linux/ipq806x/patches-5.15/121-01-clk-qcom-kpss-xcc-register-it-as-clk-provider.patch @@ -0,0 +1,64 @@ +From 09930efb4f4fb81019ca33bf64827ce258eca66f Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Thu, 15 Sep 2022 01:58:12 +0200 +Subject: [PATCH 1/9] clk: qcom: kpss-xcc: register it as clk provider + +krait-cc use this driver for the secondary mux. Register it as a clk +provider to correctly use this clk in other drivers. + +Signed-off-by: Christian Marangi +--- + drivers/clk/qcom/kpss-xcc.c | 13 +++++++++---- + 1 file changed, 9 insertions(+), 4 deletions(-) + +diff --git a/drivers/clk/qcom/kpss-xcc.c b/drivers/clk/qcom/kpss-xcc.c +index b1b370274ec4..97358c98c6c9 100644 +--- a/drivers/clk/qcom/kpss-xcc.c ++++ b/drivers/clk/qcom/kpss-xcc.c +@@ -31,13 +31,14 @@ MODULE_DEVICE_TABLE(of, kpss_xcc_match_table); + + static int kpss_xcc_driver_probe(struct platform_device *pdev) + { ++ struct device *dev = &pdev->dev; + const struct of_device_id *id; + struct resource *res; + void __iomem *base; + struct clk_hw *hw; + const char *name; + +- id = of_match_device(kpss_xcc_match_table, &pdev->dev); ++ id = of_match_device(kpss_xcc_match_table, dev); + if (!id) + return -ENODEV; + +@@ -45,7 +46,7 @@ static int kpss_xcc_driver_probe(struct platform_device *pdev) + return PTR_ERR(base); + + if (id->data) { +- if (of_property_read_string_index(pdev->dev.of_node, ++ if (of_property_read_string_index(dev->of_node, + "clock-output-names", + 0, &name)) + return -ENODEV; +@@ -55,12 +56,16 @@ static int kpss_xcc_driver_probe(struct platform_device *pdev) + base += 0x28; + } + +- hw = devm_clk_hw_register_mux_parent_data_table(&pdev->dev, name, aux_parents, ++ hw = devm_clk_hw_register_mux_parent_data_table(dev, name, aux_parents, + ARRAY_SIZE(aux_parents), 0, + base, 0, 0x3, + 0, aux_parent_map, NULL); ++ if (IS_ERR(hw)) ++ return PTR_ERR(hw); + +- return PTR_ERR_OR_ZERO(hw); ++ of_clk_add_hw_provider(dev->of_node, of_clk_hw_simple_get, hw); ++ ++ return 0; + } + + static struct platform_driver kpss_xcc_driver = { +-- +2.37.2 + diff --git a/target/linux/ipq806x/patches-5.15/121-02-clk-qcom-krait-cc-convert-to-parent_data-API.patch b/target/linux/ipq806x/patches-5.15/121-02-clk-qcom-krait-cc-convert-to-parent_data-API.patch new file mode 100644 index 0000000000..26f8333990 --- /dev/null +++ b/target/linux/ipq806x/patches-5.15/121-02-clk-qcom-krait-cc-convert-to-parent_data-API.patch @@ -0,0 +1,269 @@ +From 334c1540d5753a3c83a4cb84d935d606cb47a03b Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Thu, 17 Feb 2022 23:02:59 +0100 +Subject: [PATCH 2/9] clk: qcom: krait-cc: convert to parent_data API + +Modernize the krait-cc driver to parent-data API and refactor to drop +any use of clk_names. From Documentation all the required clocks should +be declared in DTS so fw_name can be correctly used to get the parents +for all the muxes. .name is also declared to save compatibility with old +implementation. + +Signed-off-by: Christian Marangi +--- + drivers/clk/qcom/krait-cc.c | 126 +++++++++++++++++++----------------- + 1 file changed, 66 insertions(+), 60 deletions(-) + +diff --git a/drivers/clk/qcom/krait-cc.c b/drivers/clk/qcom/krait-cc.c +index cfd961d5cc45..84f0048961f5 100644 +--- a/drivers/clk/qcom/krait-cc.c ++++ b/drivers/clk/qcom/krait-cc.c +@@ -69,21 +69,22 @@ static int krait_notifier_register(struct device *dev, struct clk *clk, + return ret; + } + +-static int ++static struct clk * + krait_add_div(struct device *dev, int id, const char *s, unsigned int offset) + { + struct krait_div2_clk *div; ++ static struct clk_parent_data p_data[1]; + struct clk_init_data init = { +- .num_parents = 1, ++ .num_parents = ARRAY_SIZE(p_data), + .ops = &krait_div2_clk_ops, + .flags = CLK_SET_RATE_PARENT, + }; +- const char *p_names[1]; + struct clk *clk; ++ char *parent_name; + + div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL); + if (!div) +- return -ENOMEM; ++ return ERR_PTR(-ENOMEM); + + div->width = 2; + div->shift = 6; +@@ -93,43 +94,49 @@ krait_add_div(struct device *dev, int id, const char *s, unsigned int offset) + + init.name = kasprintf(GFP_KERNEL, "hfpll%s_div", s); + if (!init.name) +- return -ENOMEM; ++ return ERR_PTR(-ENOMEM); + +- init.parent_names = p_names; +- p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s); +- if (!p_names[0]) { +- kfree(init.name); +- return -ENOMEM; ++ init.parent_data = p_data; ++ parent_name = kasprintf(GFP_KERNEL, "hfpll%s", s); ++ if (!parent_name) { ++ clk = ERR_PTR(-ENOMEM); ++ goto err_parent_name; + } + ++ p_data[0].fw_name = parent_name; ++ p_data[0].name = parent_name; ++ + clk = devm_clk_register(dev, &div->hw); +- kfree(p_names[0]); ++ ++ kfree(parent_name); ++err_parent_name: + kfree(init.name); + +- return PTR_ERR_OR_ZERO(clk); ++ return clk; + } + +-static int ++static struct clk * + krait_add_sec_mux(struct device *dev, int id, const char *s, + unsigned int offset, bool unique_aux) + { + int ret; + struct krait_mux_clk *mux; +- static const char *sec_mux_list[] = { +- "acpu_aux", +- "qsb", ++ static struct clk_parent_data sec_mux_list[2] = { ++ { .name = "qsb", .fw_name = "qsb" }, ++ {}, + }; + struct clk_init_data init = { +- .parent_names = sec_mux_list, ++ .parent_data = sec_mux_list, + .num_parents = ARRAY_SIZE(sec_mux_list), + .ops = &krait_mux_clk_ops, + .flags = CLK_SET_RATE_PARENT, + }; + struct clk *clk; ++ char *parent_name; + + mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); + if (!mux) +- return -ENOMEM; ++ return ERR_PTR(-ENOMEM); + + mux->offset = offset; + mux->lpl = id >= 0; +@@ -149,44 +156,51 @@ krait_add_sec_mux(struct device *dev, int id, const char *s, + + init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s); + if (!init.name) +- return -ENOMEM; ++ return ERR_PTR(-ENOMEM); + + if (unique_aux) { +- sec_mux_list[0] = kasprintf(GFP_KERNEL, "acpu%s_aux", s); +- if (!sec_mux_list[0]) { ++ parent_name = kasprintf(GFP_KERNEL, "acpu%s_aux", s); ++ if (!parent_name) { + clk = ERR_PTR(-ENOMEM); + goto err_aux; + } ++ sec_mux_list[1].fw_name = parent_name; ++ sec_mux_list[1].name = parent_name; ++ } else { ++ sec_mux_list[1].name = "apu_aux"; + } + + clk = devm_clk_register(dev, &mux->hw); ++ if (IS_ERR(clk)) ++ goto err_clk; + + ret = krait_notifier_register(dev, clk, mux); + if (ret) +- goto unique_aux; ++ clk = ERR_PTR(ret); + +-unique_aux: ++err_clk: + if (unique_aux) +- kfree(sec_mux_list[0]); ++ kfree(parent_name); + err_aux: + kfree(init.name); +- return PTR_ERR_OR_ZERO(clk); ++ return clk; + } + + static struct clk * +-krait_add_pri_mux(struct device *dev, int id, const char *s, +- unsigned int offset) ++krait_add_pri_mux(struct device *dev, struct clk *hfpll_div, struct clk *sec_mux, ++ int id, const char *s, unsigned int offset) + { + int ret; + struct krait_mux_clk *mux; +- const char *p_names[3]; ++ static struct clk_parent_data p_data[3]; + struct clk_init_data init = { +- .parent_names = p_names, +- .num_parents = ARRAY_SIZE(p_names), ++ .parent_data = p_data, ++ .num_parents = ARRAY_SIZE(p_data), + .ops = &krait_mux_clk_ops, + .flags = CLK_SET_RATE_PARENT, + }; + struct clk *clk; ++ char *hfpll_name; + + mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); + if (!mux) +@@ -204,36 +218,29 @@ krait_add_pri_mux(struct device *dev, int id, const char *s, + if (!init.name) + return ERR_PTR(-ENOMEM); + +- p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s); +- if (!p_names[0]) { ++ hfpll_name = kasprintf(GFP_KERNEL, "hfpll%s", s); ++ if (!hfpll_name) { + clk = ERR_PTR(-ENOMEM); +- goto err_p0; ++ goto err_hfpll; + } + +- p_names[1] = kasprintf(GFP_KERNEL, "hfpll%s_div", s); +- if (!p_names[1]) { +- clk = ERR_PTR(-ENOMEM); +- goto err_p1; +- } ++ p_data[0].fw_name = hfpll_name; ++ p_data[0].name = hfpll_name; + +- p_names[2] = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s); +- if (!p_names[2]) { +- clk = ERR_PTR(-ENOMEM); +- goto err_p2; +- } ++ p_data[1].hw = __clk_get_hw(hfpll_div); ++ p_data[2].hw = __clk_get_hw(sec_mux); + + clk = devm_clk_register(dev, &mux->hw); ++ if (IS_ERR(clk)) ++ goto err_clk; + + ret = krait_notifier_register(dev, clk, mux); + if (ret) +- goto err_p3; +-err_p3: +- kfree(p_names[2]); +-err_p2: +- kfree(p_names[1]); +-err_p1: +- kfree(p_names[0]); +-err_p0: ++ clk = ERR_PTR(ret); ++ ++err_clk: ++ kfree(hfpll_name); ++err_hfpll: + kfree(init.name); + return clk; + } +@@ -241,11 +248,10 @@ krait_add_pri_mux(struct device *dev, int id, const char *s, + /* id < 0 for L2, otherwise id == physical CPU number */ + static struct clk *krait_add_clks(struct device *dev, int id, bool unique_aux) + { +- int ret; + unsigned int offset; + void *p = NULL; + const char *s; +- struct clk *clk; ++ struct clk *hfpll_div, *sec_mux, *clk; + + if (id >= 0) { + offset = 0x4501 + (0x1000 * id); +@@ -257,19 +263,19 @@ static struct clk *krait_add_clks(struct device *dev, int id, bool unique_aux) + s = "_l2"; + } + +- ret = krait_add_div(dev, id, s, offset); +- if (ret) { +- clk = ERR_PTR(ret); ++ hfpll_div = krait_add_div(dev, id, s, offset); ++ if (IS_ERR(hfpll_div)) { ++ clk = hfpll_div; + goto err; + } + +- ret = krait_add_sec_mux(dev, id, s, offset, unique_aux); +- if (ret) { +- clk = ERR_PTR(ret); ++ sec_mux = krait_add_sec_mux(dev, id, s, offset, unique_aux); ++ if (IS_ERR(sec_mux)) { ++ clk = sec_mux; + goto err; + } + +- clk = krait_add_pri_mux(dev, id, s, offset); ++ clk = krait_add_pri_mux(dev, hfpll_div, sec_mux, id, s, offset); + err: + kfree(p); + return clk; +-- +2.37.2 + diff --git a/target/linux/ipq806x/patches-5.15/121-03-clk-qcom-krait-cc-handle-qsb-clock-defined-in-DTS.patch b/target/linux/ipq806x/patches-5.15/121-03-clk-qcom-krait-cc-handle-qsb-clock-defined-in-DTS.patch new file mode 100644 index 0000000000..a8bf748258 --- /dev/null +++ b/target/linux/ipq806x/patches-5.15/121-03-clk-qcom-krait-cc-handle-qsb-clock-defined-in-DTS.patch @@ -0,0 +1,52 @@ +From 666c1b745e93ccddde841d5057c33f97b29a316a Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Thu, 15 Sep 2022 02:19:28 +0200 +Subject: [PATCH 3/9] clk: qcom: krait-cc: handle qsb clock defined in DTS + +qsb fixed clk may be defined in DTS and correctly passed in the clocks +list. Add related code to handle this and modify the logic to +dynamically read qsb clock frequency. + +Signed-off-by: Christian Marangi +--- + drivers/clk/qcom/krait-cc.c | 14 +++++++++++--- + 1 file changed, 11 insertions(+), 3 deletions(-) + +diff --git a/drivers/clk/qcom/krait-cc.c b/drivers/clk/qcom/krait-cc.c +index 84f0048961f5..f1d64b16cac3 100644 +--- a/drivers/clk/qcom/krait-cc.c ++++ b/drivers/clk/qcom/krait-cc.c +@@ -305,7 +305,7 @@ static int krait_cc_probe(struct platform_device *pdev) + { + struct device *dev = &pdev->dev; + const struct of_device_id *id; +- unsigned long cur_rate, aux_rate; ++ unsigned long cur_rate, aux_rate, qsb_rate; + int cpu; + struct clk *clk; + struct clk **clks; +@@ -315,11 +315,19 @@ static int krait_cc_probe(struct platform_device *pdev) + if (!id) + return -ENODEV; + +- /* Rate is 1 because 0 causes problems for __clk_mux_determine_rate */ +- clk = clk_register_fixed_rate(dev, "qsb", NULL, 0, 1); ++ /* ++ * Per Documentation qsb should be provided from DTS. ++ * To address old implementation, register the fixed clock anyway. ++ * Rate is 1 because 0 causes problems for __clk_mux_determine_rate ++ */ ++ clk = clk_get(dev, "qsb"); ++ if (IS_ERR(clk)) ++ clk = clk_register_fixed_rate(dev, "qsb", NULL, 0, 1); + if (IS_ERR(clk)) + return PTR_ERR(clk); + ++ qsb_rate = clk_get_rate(clk); ++ + if (!id->data) { + clk = clk_register_fixed_factor(dev, "acpu_aux", + "gpll0_vote", 0, 1, 2); +-- +2.37.2 + diff --git a/target/linux/ipq806x/patches-5.15/121-04-clk-qcom-krait-cc-register-REAL-qsb-fixed-clock.patch b/target/linux/ipq806x/patches-5.15/121-04-clk-qcom-krait-cc-register-REAL-qsb-fixed-clock.patch new file mode 100644 index 0000000000..cf0c7e5071 --- /dev/null +++ b/target/linux/ipq806x/patches-5.15/121-04-clk-qcom-krait-cc-register-REAL-qsb-fixed-clock.patch @@ -0,0 +1,59 @@ +From fca6f185a9d9ef0892a719bc6da955b22d326ec7 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Thu, 15 Sep 2022 02:24:33 +0200 +Subject: [PATCH 4/9] clk: qcom: krait-cc: register REAL qsb fixed clock + +With some tools it was discovered the real frequency of the qsb fixed +clock. While not 100% correct it's still better than using 1 as a dummy +frequency. +Correctly register the qsb fixed clock with the frequency of 225 MHz +instead of 1. + +Signed-off-by: Christian Marangi +--- + drivers/clk/qcom/krait-cc.c | 8 +++++--- + 1 file changed, 5 insertions(+), 3 deletions(-) + +diff --git a/drivers/clk/qcom/krait-cc.c b/drivers/clk/qcom/krait-cc.c +index f1d64b16cac3..e91275663973 100644 +--- a/drivers/clk/qcom/krait-cc.c ++++ b/drivers/clk/qcom/krait-cc.c +@@ -15,6 +15,8 @@ + + #include "clk-krait.h" + ++#define QSB_RATE 2250000000 ++ + static unsigned int sec_mux_map[] = { + 2, + 0, +@@ -322,7 +324,7 @@ static int krait_cc_probe(struct platform_device *pdev) + */ + clk = clk_get(dev, "qsb"); + if (IS_ERR(clk)) +- clk = clk_register_fixed_rate(dev, "qsb", NULL, 0, 1); ++ clk = clk_register_fixed_rate(dev, "qsb", NULL, 0, QSB_RATE); + if (IS_ERR(clk)) + return PTR_ERR(clk); + +@@ -378,7 +380,7 @@ static int krait_cc_probe(struct platform_device *pdev) + */ + cur_rate = clk_get_rate(l2_pri_mux_clk); + aux_rate = 384000000; +- if (cur_rate == 1) { ++ if (cur_rate == qsb_rate) { + pr_info("L2 @ QSB rate. Forcing new rate.\n"); + cur_rate = aux_rate; + } +@@ -389,7 +391,7 @@ static int krait_cc_probe(struct platform_device *pdev) + for_each_possible_cpu(cpu) { + clk = clks[cpu]; + cur_rate = clk_get_rate(clk); +- if (cur_rate == 1) { ++ if (cur_rate == qsb_rate) { + pr_info("CPU%d @ QSB rate. Forcing new rate.\n", cpu); + cur_rate = aux_rate; + } +-- +2.37.2 + diff --git a/target/linux/ipq806x/patches-5.15/121-05-clk-qcom-krait-cc-use-devm-variant-for-clk-notifier-.patch b/target/linux/ipq806x/patches-5.15/121-05-clk-qcom-krait-cc-use-devm-variant-for-clk-notifier-.patch new file mode 100644 index 0000000000..a624443fbb --- /dev/null +++ b/target/linux/ipq806x/patches-5.15/121-05-clk-qcom-krait-cc-use-devm-variant-for-clk-notifier-.patch @@ -0,0 +1,30 @@ +From ff65b60fa89be06ba68e3e22702dd71700afb6a5 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Thu, 15 Sep 2022 02:34:58 +0200 +Subject: [PATCH 5/9] clk: qcom: krait-cc: use devm variant for clk notifier + register + +Use devm variant for clk notifier register and correctly handle free +resource on driver remove. + +Signed-off-by: Christian Marangi +--- + drivers/clk/qcom/krait-cc.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/drivers/clk/qcom/krait-cc.c b/drivers/clk/qcom/krait-cc.c +index e91275663973..33a78b7de0bd 100644 +--- a/drivers/clk/qcom/krait-cc.c ++++ b/drivers/clk/qcom/krait-cc.c +@@ -64,7 +64,7 @@ static int krait_notifier_register(struct device *dev, struct clk *clk, + int ret = 0; + + mux->clk_nb.notifier_call = krait_notifier_cb; +- ret = clk_notifier_register(clk, &mux->clk_nb); ++ ret = devm_clk_notifier_register(dev, clk, &mux->clk_nb); + if (ret) + dev_err(dev, "failed to register clock notifier: %d\n", ret); + +-- +2.37.2 + diff --git a/target/linux/ipq806x/patches-5.15/121-06-clk-qcom-krait-cc-fix-never-enabled-secondary-mux.patch b/target/linux/ipq806x/patches-5.15/121-06-clk-qcom-krait-cc-fix-never-enabled-secondary-mux.patch new file mode 100644 index 0000000000..bac7db9d54 --- /dev/null +++ b/target/linux/ipq806x/patches-5.15/121-06-clk-qcom-krait-cc-fix-never-enabled-secondary-mux.patch @@ -0,0 +1,52 @@ +From a0f6d7abe7f5da1a9b435eed89acace7cde4add6 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Thu, 15 Sep 2022 02:39:11 +0200 +Subject: [PATCH 6/9] clk: qcom: krait-cc: fix never enabled secondary mux + +While never actually used as a pure mux, the secondary mux is used as a +safe selection for the primary mux to switch while the hfpll are +reprogrammed. +The secondary muxes were never enabled and this cause the krait-clk +drivers to silently ignore any set parent request without any error. +Enable the secondary mux to actually apply the parent and apply the +requested frequency. + +Fixes: bb5c4a85051e ("clk: qcom: Add Krait clock controller driver") +Signed-off-by: Christian Marangi +--- + drivers/clk/qcom/krait-cc.c | 12 +++++++++++- + 1 file changed, 11 insertions(+), 1 deletion(-) + +diff --git a/drivers/clk/qcom/krait-cc.c b/drivers/clk/qcom/krait-cc.c +index 33a78b7de0bd..b71067a49ee7 100644 +--- a/drivers/clk/qcom/krait-cc.c ++++ b/drivers/clk/qcom/krait-cc.c +@@ -121,7 +121,7 @@ static struct clk * + krait_add_sec_mux(struct device *dev, int id, const char *s, + unsigned int offset, bool unique_aux) + { +- int ret; ++ int ret, cpu; + struct krait_mux_clk *mux; + static struct clk_parent_data sec_mux_list[2] = { + { .name = "qsb", .fw_name = "qsb" }, +@@ -180,6 +180,16 @@ krait_add_sec_mux(struct device *dev, int id, const char *s, + if (ret) + clk = ERR_PTR(ret); + ++ /* The secondary mux MUST be enabled or clk-krait silently ++ * ignore any request. ++ * Increase refcount for every CPU if it's the L2 secondary mux. ++ */ ++ if (id < 0) ++ for_each_possible_cpu(cpu) ++ clk_prepare_enable(clk); ++ else ++ clk_prepare_enable(clk); ++ + err_clk: + if (unique_aux) + kfree(parent_name); +-- +2.37.2 + diff --git a/target/linux/ipq806x/patches-5.15/121-07-clk-qcom-krait-cc-drop-pr_info-and-use-dev_info.patch b/target/linux/ipq806x/patches-5.15/121-07-clk-qcom-krait-cc-drop-pr_info-and-use-dev_info.patch new file mode 100644 index 0000000000..cd2b2d771f --- /dev/null +++ b/target/linux/ipq806x/patches-5.15/121-07-clk-qcom-krait-cc-drop-pr_info-and-use-dev_info.patch @@ -0,0 +1,49 @@ +From 2399d181557d94ae9a2686926cd25768f132e4b4 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Fri, 18 Mar 2022 16:12:14 +0100 +Subject: [PATCH 7/9] clk: qcom: krait-cc: drop pr_info and use dev_info + +Replace pr_info() with dev_info() to provide better diagnostics. + +Signed-off-by: Christian Marangi +--- + drivers/clk/qcom/krait-cc.c | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +diff --git a/drivers/clk/qcom/krait-cc.c b/drivers/clk/qcom/krait-cc.c +index b71067a49ee7..e4fb3ff2b5b5 100644 +--- a/drivers/clk/qcom/krait-cc.c ++++ b/drivers/clk/qcom/krait-cc.c +@@ -391,25 +391,25 @@ static int krait_cc_probe(struct platform_device *pdev) + cur_rate = clk_get_rate(l2_pri_mux_clk); + aux_rate = 384000000; + if (cur_rate == qsb_rate) { +- pr_info("L2 @ QSB rate. Forcing new rate.\n"); ++ dev_info(dev, "L2 @ QSB rate. Forcing new rate.\n"); + cur_rate = aux_rate; + } + clk_set_rate(l2_pri_mux_clk, aux_rate); + clk_set_rate(l2_pri_mux_clk, 2); + clk_set_rate(l2_pri_mux_clk, cur_rate); +- pr_info("L2 @ %lu KHz\n", clk_get_rate(l2_pri_mux_clk) / 1000); ++ dev_info(dev, "L2 @ %lu KHz\n", clk_get_rate(l2_pri_mux_clk) / 1000); + for_each_possible_cpu(cpu) { + clk = clks[cpu]; + cur_rate = clk_get_rate(clk); + if (cur_rate == qsb_rate) { +- pr_info("CPU%d @ QSB rate. Forcing new rate.\n", cpu); ++ dev_info(dev, "CPU%d @ QSB rate. Forcing new rate.\n", cpu); + cur_rate = aux_rate; + } + + clk_set_rate(clk, aux_rate); + clk_set_rate(clk, 2); + clk_set_rate(clk, cur_rate); +- pr_info("CPU%d @ %lu KHz\n", cpu, clk_get_rate(clk) / 1000); ++ dev_info(dev, "CPU%d @ %lu KHz\n", cpu, clk_get_rate(clk) / 1000); + } + + of_clk_add_provider(dev->of_node, krait_of_get, clks); +-- +2.37.2 + diff --git a/target/linux/ipq806x/patches-5.15/121-08-clk-qcom-krait-cc-handle-secondary-mux-sourcing-out-.patch b/target/linux/ipq806x/patches-5.15/121-08-clk-qcom-krait-cc-handle-secondary-mux-sourcing-out-.patch new file mode 100644 index 0000000000..9e7081b40e --- /dev/null +++ b/target/linux/ipq806x/patches-5.15/121-08-clk-qcom-krait-cc-handle-secondary-mux-sourcing-out-.patch @@ -0,0 +1,75 @@ +From b6655ca513b3f1b40417287ab7f706409455fe48 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Thu, 15 Sep 2022 02:56:47 +0200 +Subject: [PATCH 8/9] clk: qcom: krait-cc: handle secondary mux sourcing out of + PXO + +The secondary mux can sourc out of PXO as the secondary MUX is attached +to QSB and to another mux that can source out of PXO or PLL8_VOTE. + +Many device may run with uncorrect configuration with the mux sourcing +out of PXO instead of PLL8_VOTE. + +To handle this case we add also PXO as required clocks and we check if +the frequency is currently set to PXO and force a correct rate if it's +the case. + +Signed-off-by: Christian Marangi +--- + drivers/clk/qcom/krait-cc.c | 19 ++++++++++++++++++- + 1 file changed, 18 insertions(+), 1 deletion(-) + +diff --git a/drivers/clk/qcom/krait-cc.c b/drivers/clk/qcom/krait-cc.c +index e4fb3ff2b5b5..717eff44b6a4 100644 +--- a/drivers/clk/qcom/krait-cc.c ++++ b/drivers/clk/qcom/krait-cc.c +@@ -317,7 +317,7 @@ static int krait_cc_probe(struct platform_device *pdev) + { + struct device *dev = &pdev->dev; + const struct of_device_id *id; +- unsigned long cur_rate, aux_rate, qsb_rate; ++ unsigned long cur_rate, aux_rate, qsb_rate, pxo_rate; + int cpu; + struct clk *clk; + struct clk **clks; +@@ -327,6 +327,15 @@ static int krait_cc_probe(struct platform_device *pdev) + if (!id) + return -ENODEV; + ++ clk = clk_get(dev, "pxo"); ++ if (IS_ERR(clk)) ++ clk = __clk_lookup("pxo_board"); ++ ++ if (IS_ERR_OR_NULL(clk)) ++ return clk == NULL ? -ENODEV : PTR_ERR(clk); ++ ++ pxo_rate = clk_get_rate(clk); ++ + /* + * Per Documentation qsb should be provided from DTS. + * To address old implementation, register the fixed clock anyway. +@@ -394,6 +403,10 @@ static int krait_cc_probe(struct platform_device *pdev) + dev_info(dev, "L2 @ QSB rate. Forcing new rate.\n"); + cur_rate = aux_rate; + } ++ if (cur_rate == pxo_rate) { ++ dev_info(dev, "L2 @ PXO rate. Forcing new rate.\n"); ++ cur_rate = aux_rate; ++ } + clk_set_rate(l2_pri_mux_clk, aux_rate); + clk_set_rate(l2_pri_mux_clk, 2); + clk_set_rate(l2_pri_mux_clk, cur_rate); +@@ -405,6 +418,10 @@ static int krait_cc_probe(struct platform_device *pdev) + dev_info(dev, "CPU%d @ QSB rate. Forcing new rate.\n", cpu); + cur_rate = aux_rate; + } ++ if (cur_rate ==pxo_rate) { ++ dev_info(dev, "CPU%d @ PXO rate. Forcing new rate.\n", cpu); ++ cur_rate = aux_rate; ++ } + + clk_set_rate(clk, aux_rate); + clk_set_rate(clk, 2); +-- +2.37.2 + diff --git a/target/linux/ipq806x/patches-5.15/121-09-clk-qcom-krait-cc-rework-mux-reset-logic-and-reset-h.patch b/target/linux/ipq806x/patches-5.15/121-09-clk-qcom-krait-cc-rework-mux-reset-logic-and-reset-h.patch new file mode 100644 index 0000000000..fb5cb14a79 --- /dev/null +++ b/target/linux/ipq806x/patches-5.15/121-09-clk-qcom-krait-cc-rework-mux-reset-logic-and-reset-h.patch @@ -0,0 +1,102 @@ +From 6a77cf3f5f95ec0058e1b4d1ada018748cb0b83b Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Thu, 15 Sep 2022 03:33:13 +0200 +Subject: [PATCH 9/9] clk: qcom: krait-cc: rework mux reset logic and reset + hfpll + +Rework and clean mux reset logic. +Compact it to a for loop to handle both CPU and L2 in one place. +Move hardcoded aux_rate to define and add a new hfpll_rate value to +reset hfpll settings. +Change logic to now reset the hfpll to the lowest value of 600 Mhz and +then restoring the previous frequency. This permits to reset the hfpll if +the primary mux was set to source out of the secondary mux. + +Signed-off-by: Christian Marangi +--- + drivers/clk/qcom/krait-cc.c | 50 +++++++++++++++++-------------------- + 1 file changed, 23 insertions(+), 27 deletions(-) + +diff --git a/drivers/clk/qcom/krait-cc.c b/drivers/clk/qcom/krait-cc.c +index 717eff44b6a4..90dee71e7c38 100644 +--- a/drivers/clk/qcom/krait-cc.c ++++ b/drivers/clk/qcom/krait-cc.c +@@ -15,7 +15,9 @@ + + #include "clk-krait.h" + +-#define QSB_RATE 2250000000 ++#define QSB_RATE 225000000 ++#define AUX_RATE 384000000 ++#define HFPLL_RATE 600000000 + + static unsigned int sec_mux_map[] = { + 2, +@@ -317,7 +319,7 @@ static int krait_cc_probe(struct platform_device *pdev) + { + struct device *dev = &pdev->dev; + const struct of_device_id *id; +- unsigned long cur_rate, aux_rate, qsb_rate, pxo_rate; ++ unsigned long cur_rate, qsb_rate, pxo_rate; + int cpu; + struct clk *clk; + struct clk **clks; +@@ -397,36 +399,30 @@ static int krait_cc_probe(struct platform_device *pdev) + * two different rates to force a HFPLL reinit under all + * circumstances. + */ +- cur_rate = clk_get_rate(l2_pri_mux_clk); +- aux_rate = 384000000; +- if (cur_rate == qsb_rate) { +- dev_info(dev, "L2 @ QSB rate. Forcing new rate.\n"); +- cur_rate = aux_rate; +- } +- if (cur_rate == pxo_rate) { +- dev_info(dev, "L2 @ PXO rate. Forcing new rate.\n"); +- cur_rate = aux_rate; +- } +- clk_set_rate(l2_pri_mux_clk, aux_rate); +- clk_set_rate(l2_pri_mux_clk, 2); +- clk_set_rate(l2_pri_mux_clk, cur_rate); +- dev_info(dev, "L2 @ %lu KHz\n", clk_get_rate(l2_pri_mux_clk) / 1000); +- for_each_possible_cpu(cpu) { ++ for (cpu = 0; cpu < 5; cpu++) { ++ const char *l2_s = "L2"; ++ char cpu_s[5]; ++ + clk = clks[cpu]; ++ if (!clk) ++ continue; ++ ++ if (cpu < 4) ++ snprintf(cpu_s, 5, "CPU%d", cpu); ++ + cur_rate = clk_get_rate(clk); +- if (cur_rate == qsb_rate) { +- dev_info(dev, "CPU%d @ QSB rate. Forcing new rate.\n", cpu); +- cur_rate = aux_rate; +- } +- if (cur_rate ==pxo_rate) { +- dev_info(dev, "CPU%d @ PXO rate. Forcing new rate.\n", cpu); +- cur_rate = aux_rate; ++ if (cur_rate == qsb_rate || cur_rate == pxo_rate) { ++ dev_info(dev, "%s @ %s rate. Forcing new rate.\n", ++ cpu < 4 ? cpu_s : l2_s, ++ cur_rate == qsb_rate ? "QSB" : "PXO"); ++ cur_rate = AUX_RATE; + } + +- clk_set_rate(clk, aux_rate); +- clk_set_rate(clk, 2); ++ clk_set_rate(clk, AUX_RATE); ++ clk_set_rate(clk, HFPLL_RATE); + clk_set_rate(clk, cur_rate); +- dev_info(dev, "CPU%d @ %lu KHz\n", cpu, clk_get_rate(clk) / 1000); ++ dev_info(dev, "%s @ %lu KHz\n", cpu < 4 ? cpu_s : l2_s, ++ clk_get_rate(clk) / 1000); + } + + of_clk_add_provider(dev->of_node, krait_of_get, clks); +-- +2.37.2 +