From: David Ahern Date: Thu, 1 Aug 2019 18:56:35 +0000 (-0700) Subject: selftests: Setup for functional tests for fib and socket lookups X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=6f9d5cacfe07308fd4007ebdcb76861752d0a1ad;p=openwrt%2Fstaging%2Fblogic.git selftests: Setup for functional tests for fib and socket lookups Initial commit for functional test suite for fib and socket lookups. This commit contains the namespace setup, networking config, test options and other basic infrastructure. Signed-off-by: David Ahern Signed-off-by: David S. Miller --- diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index ba9ee36c9e94..70f2d6656170 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -10,7 +10,7 @@ TEST_PROGS += fib_tests.sh fib-onlink-tests.sh pmtu.sh udpgso.sh ip_defrag.sh TEST_PROGS += udpgso_bench.sh fib_rule_tests.sh msg_zerocopy.sh psock_snd.sh TEST_PROGS += udpgro_bench.sh udpgro.sh test_vxlan_under_vrf.sh reuseport_addr_any.sh TEST_PROGS += test_vxlan_fdb_changelink.sh so_txtime.sh ipv6_flowlabel.sh -TEST_PROGS += tcp_fastopen_backup_key.sh +TEST_PROGS += tcp_fastopen_backup_key.sh fcnal-test.sh TEST_PROGS_EXTENDED := in_netns.sh TEST_GEN_FILES = socket nettest TEST_GEN_FILES += psock_fanout psock_tpacket msg_zerocopy reuseport_addr_any diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh new file mode 100755 index 000000000000..22cfbd2fd09c --- /dev/null +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -0,0 +1,520 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (c) 2019 David Ahern . All rights reserved. +# +# IPv4 and IPv6 functional tests focusing on VRF and routing lookups +# for various permutations: +# 1. icmp, tcp, udp and netfilter +# 2. client, server, no-server +# 3. global address on interface +# 4. global address on 'lo' +# 5. remote and local traffic +# 6. VRF and non-VRF permutations +# +# Setup: +# ns-A | ns-B +# No VRF case: +# [ lo ] [ eth1 ]---|---[ eth1 ] [ lo ] +# remote address +# VRF case: +# [ red ]---[ eth1 ]---|---[ eth1 ] [ lo ] +# +# ns-A: +# eth1: 172.16.1.1/24, 2001:db8:1::1/64 +# lo: 127.0.0.1/8, ::1/128 +# 172.16.2.1/32, 2001:db8:2::1/128 +# red: 127.0.0.1/8, ::1/128 +# 172.16.3.1/32, 2001:db8:3::1/128 +# +# ns-B: +# eth1: 172.16.1.2/24, 2001:db8:1::2/64 +# lo2: 127.0.0.1/8, ::1/128 +# 172.16.2.2/32, 2001:db8:2::2/128 +# +# server / client nomenclature relative to ns-A + +VERBOSE=0 + +NSA_DEV=eth1 +NSB_DEV=eth1 +VRF=red +VRF_TABLE=1101 + +# IPv4 config +NSA_IP=172.16.1.1 +NSB_IP=172.16.1.2 +VRF_IP=172.16.3.1 + +# IPv6 config +NSA_IP6=2001:db8:1::1 +NSB_IP6=2001:db8:1::2 +VRF_IP6=2001:db8:3::1 + +NSA_LO_IP=172.16.2.1 +NSB_LO_IP=172.16.2.2 +NSA_LO_IP6=2001:db8:2::1 +NSB_LO_IP6=2001:db8:2::2 + +MCAST=ff02::1 +# set after namespace create +NSA_LINKIP6= +NSB_LINKIP6= + +NSA=ns-A +NSB=ns-B + +NSA_CMD="ip netns exec ${NSA}" +NSB_CMD="ip netns exec ${NSB}" + +which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping) + +################################################################################ +# utilities + +log_test() +{ + local rc=$1 + local expected=$2 + local msg="$3" + + [ "${VERBOSE}" = "1" ] && echo + + if [ ${rc} -eq ${expected} ]; then + nsuccess=$((nsuccess+1)) + printf "TEST: %-70s [ OK ]\n" "${msg}" + else + nfail=$((nfail+1)) + printf "TEST: %-70s [FAIL]\n" "${msg}" + if [ "${PAUSE_ON_FAIL}" = "yes" ]; then + echo + echo "hit enter to continue, 'q' to quit" + read a + [ "$a" = "q" ] && exit 1 + fi + fi + + if [ "${PAUSE}" = "yes" ]; then + echo + echo "hit enter to continue, 'q' to quit" + read a + [ "$a" = "q" ] && exit 1 + fi + + kill_procs +} + +log_test_addr() +{ + local addr=$1 + local rc=$2 + local expected=$3 + local msg="$4" + local astr + + astr=$(addr2str ${addr}) + log_test $rc $expected "$msg - ${astr}" +} + +log_section() +{ + echo + echo "###########################################################################" + echo "$*" + echo "###########################################################################" + echo +} + +log_subsection() +{ + echo + echo "#################################################################" + echo "$*" + echo +} + +log_start() +{ + # make sure we have no test instances running + kill_procs + + if [ "${VERBOSE}" = "1" ]; then + echo + echo "#######################################################" + fi +} + +log_debug() +{ + if [ "${VERBOSE}" = "1" ]; then + echo + echo "$*" + echo + fi +} + +show_hint() +{ + if [ "${VERBOSE}" = "1" ]; then + echo "HINT: $*" + echo + fi +} + +kill_procs() +{ + killall nettest ping ping6 >/dev/null 2>&1 + sleep 1 +} + +do_run_cmd() +{ + local cmd="$*" + local out + + if [ "$VERBOSE" = "1" ]; then + echo "COMMAND: ${cmd}" + fi + + out=$($cmd 2>&1) + rc=$? + if [ "$VERBOSE" = "1" -a -n "$out" ]; then + echo "$out" + fi + + return $rc +} + +run_cmd() +{ + do_run_cmd ${NSA_CMD} $* +} + +run_cmd_nsb() +{ + do_run_cmd ${NSB_CMD} $* +} + +setup_cmd() +{ + local cmd="$*" + local rc + + run_cmd ${cmd} + rc=$? + if [ $rc -ne 0 ]; then + # show user the command if not done so already + if [ "$VERBOSE" = "0" ]; then + echo "setup command: $cmd" + fi + echo "failed. stopping tests" + if [ "${PAUSE_ON_FAIL}" = "yes" ]; then + echo + echo "hit enter to continue" + read a + fi + exit $rc + fi +} + +setup_cmd_nsb() +{ + local cmd="$*" + local rc + + run_cmd_nsb ${cmd} + rc=$? + if [ $rc -ne 0 ]; then + # show user the command if not done so already + if [ "$VERBOSE" = "0" ]; then + echo "setup command: $cmd" + fi + echo "failed. stopping tests" + if [ "${PAUSE_ON_FAIL}" = "yes" ]; then + echo + echo "hit enter to continue" + read a + fi + exit $rc + fi +} + +# set sysctl values in NS-A +set_sysctl() +{ + echo "SYSCTL: $*" + echo + run_cmd sysctl -q -w $* +} + +################################################################################ +# Setup for tests + +addr2str() +{ + case "$1" in + 127.0.0.1) echo "loopback";; + ::1) echo "IPv6 loopback";; + + ${NSA_IP}) echo "ns-A IP";; + ${NSA_IP6}) echo "ns-A IPv6";; + ${NSA_LO_IP}) echo "ns-A loopback IP";; + ${NSA_LO_IP6}) echo "ns-A loopback IPv6";; + ${NSA_LINKIP6}|${NSA_LINKIP6}%*) echo "ns-A IPv6 LLA";; + + ${NSB_IP}) echo "ns-B IP";; + ${NSB_IP6}) echo "ns-B IPv6";; + ${NSB_LO_IP}) echo "ns-B loopback IP";; + ${NSB_LO_IP6}) echo "ns-B loopback IPv6";; + ${NSB_LINKIP6}|${NSB_LINKIP6}%*) echo "ns-B IPv6 LLA";; + + ${VRF_IP}) echo "VRF IP";; + ${VRF_IP6}) echo "VRF IPv6";; + + ${MCAST}%*) echo "multicast IP";; + + *) echo "unknown";; + esac +} + +get_linklocal() +{ + local ns=$1 + local dev=$2 + local addr + + addr=$(ip -netns ${ns} -6 -br addr show dev ${dev} | \ + awk '{ + for (i = 3; i <= NF; ++i) { + if ($i ~ /^fe80/) + print $i + } + }' + ) + addr=${addr/\/*} + + [ -z "$addr" ] && return 1 + + echo $addr + + return 0 +} + +################################################################################ +# create namespaces and vrf + +create_vrf() +{ + local ns=$1 + local vrf=$2 + local table=$3 + local addr=$4 + local addr6=$5 + + ip -netns ${ns} link add ${vrf} type vrf table ${table} + ip -netns ${ns} link set ${vrf} up + ip -netns ${ns} route add vrf ${vrf} unreachable default metric 8192 + ip -netns ${ns} -6 route add vrf ${vrf} unreachable default metric 8192 + + ip -netns ${ns} addr add 127.0.0.1/8 dev ${vrf} + ip -netns ${ns} -6 addr add ::1 dev ${vrf} nodad + if [ "${addr}" != "-" ]; then + ip -netns ${ns} addr add dev ${vrf} ${addr} + fi + if [ "${addr6}" != "-" ]; then + ip -netns ${ns} -6 addr add dev ${vrf} ${addr6} + fi + + ip -netns ${ns} ru del pref 0 + ip -netns ${ns} ru add pref 32765 from all lookup local + ip -netns ${ns} -6 ru del pref 0 + ip -netns ${ns} -6 ru add pref 32765 from all lookup local +} + +create_ns() +{ + local ns=$1 + local addr=$2 + local addr6=$3 + + ip netns add ${ns} + + ip -netns ${ns} link set lo up + if [ "${addr}" != "-" ]; then + ip -netns ${ns} addr add dev lo ${addr} + fi + if [ "${addr6}" != "-" ]; then + ip -netns ${ns} -6 addr add dev lo ${addr6} + fi + + ip -netns ${ns} ro add unreachable default metric 8192 + ip -netns ${ns} -6 ro add unreachable default metric 8192 + + ip netns exec ${ns} sysctl -qw net.ipv4.ip_forward=1 + ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1 + ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.forwarding=1 + ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.forwarding=1 +} + +# create veth pair to connect namespaces and apply addresses. +connect_ns() +{ + local ns1=$1 + local ns1_dev=$2 + local ns1_addr=$3 + local ns1_addr6=$4 + local ns2=$5 + local ns2_dev=$6 + local ns2_addr=$7 + local ns2_addr6=$8 + + ip -netns ${ns1} li add ${ns1_dev} type veth peer name tmp + ip -netns ${ns1} li set ${ns1_dev} up + ip -netns ${ns1} li set tmp netns ${ns2} name ${ns2_dev} + ip -netns ${ns2} li set ${ns2_dev} up + + if [ "${ns1_addr}" != "-" ]; then + ip -netns ${ns1} addr add dev ${ns1_dev} ${ns1_addr} + ip -netns ${ns2} addr add dev ${ns2_dev} ${ns2_addr} + fi + + if [ "${ns1_addr6}" != "-" ]; then + ip -netns ${ns1} addr add dev ${ns1_dev} ${ns1_addr6} + ip -netns ${ns2} addr add dev ${ns2_dev} ${ns2_addr6} + fi +} + +cleanup() +{ + # explicit cleanups to check those code paths + ip netns | grep -q ${NSA} + if [ $? -eq 0 ]; then + ip -netns ${NSA} link delete ${VRF} + ip -netns ${NSA} ro flush table ${VRF_TABLE} + + ip -netns ${NSA} addr flush dev ${NSA_DEV} + ip -netns ${NSA} -6 addr flush dev ${NSA_DEV} + ip -netns ${NSA} link set dev ${NSA_DEV} down + ip -netns ${NSA} link del dev ${NSA_DEV} + + ip netns del ${NSA} + fi + + ip netns del ${NSB} +} + +setup() +{ + local with_vrf=${1} + + # make sure we are starting with a clean slate + kill_procs + cleanup 2>/dev/null + + log_debug "Configuring network namespaces" + set -e + + create_ns ${NSA} ${NSA_LO_IP}/32 ${NSA_LO_IP6}/128 + create_ns ${NSB} ${NSB_LO_IP}/32 ${NSB_LO_IP6}/128 + connect_ns ${NSA} ${NSA_DEV} ${NSA_IP}/24 ${NSA_IP6}/64 \ + ${NSB} ${NSB_DEV} ${NSB_IP}/24 ${NSB_IP6}/64 + + NSA_LINKIP6=$(get_linklocal ${NSA} ${NSA_DEV}) + NSB_LINKIP6=$(get_linklocal ${NSB} ${NSB_DEV}) + + # tell ns-A how to get to remote addresses of ns-B + if [ "${with_vrf}" = "yes" ]; then + create_vrf ${NSA} ${VRF} ${VRF_TABLE} ${VRF_IP} ${VRF_IP6} + + ip -netns ${NSA} link set dev ${NSA_DEV} vrf ${VRF} + ip -netns ${NSA} ro add vrf ${VRF} ${NSB_LO_IP}/32 via ${NSB_IP} dev ${NSA_DEV} + ip -netns ${NSA} -6 ro add vrf ${VRF} ${NSB_LO_IP6}/128 via ${NSB_IP6} dev ${NSA_DEV} + + ip -netns ${NSB} ro add ${VRF_IP}/32 via ${NSA_IP} dev ${NSB_DEV} + ip -netns ${NSB} -6 ro add ${VRF_IP6}/128 via ${NSA_IP6} dev ${NSB_DEV} + else + ip -netns ${NSA} ro add ${NSB_LO_IP}/32 via ${NSB_IP} dev ${NSA_DEV} + ip -netns ${NSA} ro add ${NSB_LO_IP6}/128 via ${NSB_IP6} dev ${NSA_DEV} + fi + + + # tell ns-B how to get to remote addresses of ns-A + ip -netns ${NSB} ro add ${NSA_LO_IP}/32 via ${NSA_IP} dev ${NSB_DEV} + ip -netns ${NSB} ro add ${NSA_LO_IP6}/128 via ${NSA_IP6} dev ${NSB_DEV} + + set +e + + sleep 1 +} + +################################################################################ +# usage + +usage() +{ + cat < Test name/set to run + -p Pause on fail + -P Pause after each test + -v Be verbose +EOF +} + +################################################################################ +# main + +TESTS_IPV4="" +TESTS_IPV6="" +PAUSE_ON_FAIL=no +PAUSE=no + +while getopts :46t:pPvh o +do + case $o in + 4) TESTS=ipv4;; + 6) TESTS=ipv6;; + t) TESTS=$OPTARG;; + p) PAUSE_ON_FAIL=yes;; + P) PAUSE=yes;; + v) VERBOSE=1;; + h) usage; exit 0;; + *) usage; exit 1;; + esac +done + +# make sure we don't pause twice +[ "${PAUSE}" = "yes" ] && PAUSE_ON_FAIL=no + +# +# show user test config +# +if [ -z "$TESTS" ]; then + TESTS="$TESTS_IPV4 $TESTS_IPV6 $TESTS_OTHER" +elif [ "$TESTS" = "ipv4" ]; then + TESTS="$TESTS_IPV4" +elif [ "$TESTS" = "ipv6" ]; then + TESTS="$TESTS_IPV6" +fi + +declare -i nfail=0 +declare -i nsuccess=0 + +for t in $TESTS +do + case $t in + # setup namespaces and config, but do not run any tests + setup) setup; exit 0;; + vrf_setup) setup "yes"; exit 0;; + + help) echo "Test names: $TESTS"; exit 0;; + esac +done + +cleanup 2>/dev/null + +printf "\nTests passed: %3d\n" ${nsuccess} +printf "Tests failed: %3d\n" ${nfail}