From: Ralf Baechle Date: Fri, 13 Jul 2007 05:33:09 +0000 (+0100) Subject: [MIPS] Alchemy: Remove code wrapped by dead symbol CONFIG_AU1XXX_PSC_SPI X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=6fec2e1727049ce6a404f4af61461d860594d5db;p=openwrt%2Fstaging%2Fblogic.git [MIPS] Alchemy: Remove code wrapped by dead symbol CONFIG_AU1XXX_PSC_SPI Noticed by Robert P. J. Day (rpjday@mindspring.com). Signed-off-by: Ralf Baechle --- diff --git a/arch/mips/au1000/pb1200/board_setup.c b/arch/mips/au1000/pb1200/board_setup.c index 043302b7fe58..eea2092bde8d 100644 --- a/arch/mips/au1000/pb1200/board_setup.c +++ b/arch/mips/au1000/pb1200/board_setup.c @@ -131,14 +131,7 @@ void __init board_setup(void) /* The Pb1200 development board uses external MUX for PSC0 to support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI */ -#if defined(CONFIG_AU1XXX_PSC_SPI) && defined(CONFIG_I2C_AU1550) - #error I2C and SPI are mutually exclusive. Both are physically connected to PSC0.\ - Refer to Pb1200/Db1200 documentation. -#elif defined( CONFIG_AU1XXX_PSC_SPI ) - bcsr->resets |= BCSR_RESETS_PCS0MUX; - /*Hard Coding Value to enable Temp Sensors [bit 14] Value for SOC Au1200. Pls refer documentation*/ - bcsr->resets =0x900f; -#elif defined( CONFIG_I2C_AU1550 ) +#ifdef CONFIG_I2C_AU1550 bcsr->resets &= (~BCSR_RESETS_PCS0MUX); #endif au_sync();