From: Lars Wessels Date: Sat, 4 Jul 2020 11:59:17 +0000 (+0200) Subject: lantiq: wifi mac fix for ARV752DPW X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=702366a30b8443964a3ad80287a09ddc4cc6f8e9;p=openwrt%2Fstaging%2Flinusw.git lantiq: wifi mac fix for ARV752DPW Set wifi mac from flash partition 'board_config' to match the label on the device (Easybox 802). Currently the wifi mac is always set to 00:0c:43:28:60:00. eth0 and WiFi will now share the same mac (as in original firmware). Signed-off-by: Lars Wessels [improve commit message] Signed-off-by: David Bauer --- diff --git a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw.dts b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw.dts index 069b1b1ed6..7c51f31bad 100644 --- a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw.dts +++ b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw.dts @@ -21,6 +21,8 @@ led-dsl = &internet_red; led-usb = &umts; led-wifi = &wifi; + + label-mac-device = &wifi0; }; memory@0 { @@ -217,9 +219,10 @@ interrupt-map = <0x7000 0 0 1 &icu0 135>; req-mask = <0x3>; - wifi@1814,0601 { + wifi0: wifi@1814,0601 { compatible = "pci1814,0601"; reg = <0x7000 0 0 0 0>; + mtd-mac-address = <&boardconfig 0x16>; ralink,mtd-eeprom = <&boardconfig 0x410>; ralink,mtd-eeprom-swap; }; diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw.dts b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw.dts index 069b1b1ed6..7c51f31bad 100644 --- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw.dts +++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw.dts @@ -21,6 +21,8 @@ led-dsl = &internet_red; led-usb = &umts; led-wifi = &wifi; + + label-mac-device = &wifi0; }; memory@0 { @@ -217,9 +219,10 @@ interrupt-map = <0x7000 0 0 1 &icu0 135>; req-mask = <0x3>; - wifi@1814,0601 { + wifi0: wifi@1814,0601 { compatible = "pci1814,0601"; reg = <0x7000 0 0 0 0>; + mtd-mac-address = <&boardconfig 0x16>; ralink,mtd-eeprom = <&boardconfig 0x410>; ralink,mtd-eeprom-swap; };