From: Ganesh Goudar Date: Wed, 21 Jun 2017 14:25:43 +0000 (+0530) Subject: iw_cxgb4: don't use WR keys/addrs for 0 byte reads X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=720336c42e41a917002fcae3aa14e30f5022bbb7;p=openwrt%2Fstaging%2Fblogic.git iw_cxgb4: don't use WR keys/addrs for 0 byte reads Only use the read sge lkey/addr and the remote rkey/addr if the length of the read is not zero. Otherwise the read response might be treated as the RTR read response and not delivered to the application. Or worse Terminator hardware will fail a 0B read if the STAG is 0 even if the read length is 0. Signed-off-by: Steve Wise Signed-off-by: Ganesh Goudar Signed-off-by: Doug Ledford --- diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c index bfc77596acbe..cb7fc0d35d1d 100644 --- a/drivers/infiniband/hw/cxgb4/qp.c +++ b/drivers/infiniband/hw/cxgb4/qp.c @@ -569,7 +569,7 @@ static int build_rdma_read(union t4_wr *wqe, struct ib_send_wr *wr, u8 *len16) { if (wr->num_sge > 1) return -EINVAL; - if (wr->num_sge) { + if (wr->num_sge && wr->sg_list[0].length) { wqe->read.stag_src = cpu_to_be32(rdma_wr(wr)->rkey); wqe->read.to_src_hi = cpu_to_be32((u32)(rdma_wr(wr)->remote_addr >> 32));