From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 18 Sep 2009 16:19:26 +0000 (-0700)
Subject: Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind... 
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=73c583e4e2dd0fbbf2fafe0cc57ff75314fe72df;p=openwrt%2Fstaging%2Fblogic.git

Merge branch 'omap-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (47 commits)
  OMAP clock: use debugfs_remove_recursive() for rewinding
  OMAP2/3/4 core: create omap_device layer
  OMAP: omap_hwmod: call omap_hwmod init at boot; create interconnects
  OMAP2/3/4: create omap_hwmod layer
  OMAP2/3 board-*.c files: read bootloader configuration earlier
  OMAP2/3/4 PRCM: add module IDLEST wait code
  OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM no-op layer
  OMAP3 clock: remove superfluous calls to omap2_init_clk_clkdm
  OMAP clock: associate MPU clocks with the mpu_clkdm
  OMAP3 clock: Fixed processing of bootarg 'mpurate'
  OMAP: SDRC: Add several new register definitions
  OMAP: powerdomain: Fix overflow when doing powerdomain deps lookups.
  OMAP: PM: Added suspend target state control to debugfs for OMAP3
  OMAP: PM debug: Add PRCM register dump support
  OMAP: PM debug: make powerdomains use PM-debug counters
  OMAP: PM: Add pm-debug counters
  OMAP: PM: Add closures to clkdm_for_each and pwrdm_for_each.
  OMAP: PM: Hook into PM counters
  OMAP: PM counter infrastructure.
  OMAP3: PM: fix lockdep warning caused by omap3_pm_init
  ...
---

73c583e4e2dd0fbbf2fafe0cc57ff75314fe72df
diff --cc arch/arm/plat-omap/gpio.c
index 176c86e5531d,7c70a6afcf66..693839c89ad0
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@@ -2054,31 -1910,41 +2054,50 @@@ void omap2_gpio_resume_after_retention(
  		 * state.  If so, generate an IRQ by software.  This is
  		 * horribly racy, but it's the best we can do to work around
  		 * this silicon bug. */
 -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
 -			defined(CONFIG_ARCH_OMAP4)
 -		l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
 -#endif
  		l ^= bank->saved_datain;
  		l &= bank->non_wakeup_gpios;
- 		if (l) {
+ 
+ 		/*
+ 		 * No need to generate IRQs for the rising edge for gpio IRQs
+ 		 * configured with falling edge only; and vice versa.
+ 		 */
+ 		gen0 = l & bank->saved_fallingdetect;
+ 		gen0 &= bank->saved_datain;
+ 
+ 		gen1 = l & bank->saved_risingdetect;
+ 		gen1 &= ~(bank->saved_datain);
+ 
+ 		/* FIXME: Consider GPIO IRQs with level detections properly! */
+ 		gen = l & (~(bank->saved_fallingdetect) &
+ 				~(bank->saved_risingdetect));
+ 		/* Consider all GPIO IRQs needed to be updated */
+ 		gen |= gen0 | gen1;
+ 
+ 		if (gen) {
  			u32 old0, old1;
 -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
 -			defined(CONFIG_ARCH_OMAP4)
 +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
  			old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
  			old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
- 			__raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
- 			__raw_writel(old1 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+ 			__raw_writel(old0 | gen, bank->base +
+ 					OMAP24XX_GPIO_LEVELDETECT0);
+ 			__raw_writel(old1 | gen, bank->base +
+ 					OMAP24XX_GPIO_LEVELDETECT1);
  			__raw_writel(old0, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
  			__raw_writel(old1, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
 +#endif
 +#ifdef CONFIG_ARCH_OMAP4
 +			old0 = __raw_readl(bank->base +
 +						OMAP4_GPIO_LEVELDETECT0);
 +			old1 = __raw_readl(bank->base +
 +						OMAP4_GPIO_LEVELDETECT1);
 +			__raw_writel(old0 | l, bank->base +
 +						OMAP4_GPIO_LEVELDETECT0);
 +			__raw_writel(old1 | l, bank->base +
 +						OMAP4_GPIO_LEVELDETECT1);
 +			__raw_writel(old0, bank->base +
 +						OMAP4_GPIO_LEVELDETECT0);
 +			__raw_writel(old1, bank->base +
 +						OMAP4_GPIO_LEVELDETECT1);
  #endif
  		}
  	}