From: Joe Mullally Date: Sat, 12 Sep 2020 18:46:28 +0000 (+0100) Subject: ath79: add support for TP-Link TL-WPA8630P (EU) v2.1 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=7422c7a6fa2eb5f02f9bd7fa9d63ebe8514f88ff;p=openwrt%2Fstaging%2Fneocturne.git ath79: add support for TP-Link TL-WPA8630P (EU) v2.1 This adds support for the TP-Link TL-WPA8630P (EU) in its v2.1 version. The only unique aspect for the firmware compared to v2 layout is the partition layout. Note that while the EU version has different partitioning for v2.0 and v2.1, the v2.1 (AU) is supported by the v2-int image. If you plan to use this device, make sure you have a look at the Wiki page to check whether the device is supported and which image needs to be taken. Specifications -------------- - QCA9563 750MHz, 2.4GHz WiFi - QCA9888 5GHz WiFi - 8MiB SPI Flash - 128MiB RAM - 3 GBit Ports (QCA8337) - PLC (QCA7550) Installation ------------ Installation is possible from the OEM web interface. Make sure to install the latest OEM firmware first, so that the PLC firmware is at the latest version. However, please also check the Wiki page for hints according to altered partitioning between OEM firmware revisions. Notes ----- The OEM firmware has 0x620000 to 0x680000 unassigned, so we leave this empty as well. It is complicated enough already ... Signed-off-by: Joe Mullally [improve partitions, use v2 DTSI, add entry in 02_network, rewrite and extend commit message] Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2-eu.dts b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2-eu.dts index 4c04d4f96e..48cc5ed32f 100644 --- a/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2-eu.dts +++ b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2-eu.dts @@ -8,6 +8,12 @@ }; &partitions { + partition@620000 { + label = "partition-table"; + reg = <0x620000 0x010000>; + read-only; + }; + info: partition@630000 { label = "info"; reg = <0x630000 0x010000>; diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2-int.dts b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2-int.dts index 22a8082011..50a88f344a 100644 --- a/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2-int.dts +++ b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2-int.dts @@ -8,6 +8,12 @@ }; &partitions { + partition@620000 { + label = "partition-table"; + reg = <0x620000 0x010000>; + read-only; + }; + partition@630000 { label = "tplink"; reg = <0x630000 0x1b0000>; diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.1-eu.dts b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.1-eu.dts new file mode 100644 index 0000000000..e8d92419c6 --- /dev/null +++ b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.1-eu.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9563_tplink_tl-wpa8630p-v2.dtsi" + +/ { + compatible = "tplink,tl-wpa8630p-v2.1-eu", "qca,qca9563"; + model = "TP-Link WPA8630P v2.1 (EU)"; +}; + +&partitions { + /* 0x620000 to 0x680000 is empty in OEM partitioning */ + + partition@680000 { + label = "tplink"; + reg = <0x680000 0x160000>; + read-only; + }; + + info: partition@7e0000 { + label = "info"; + reg = <0x7e0000 0x010000>; + read-only; + }; + + art: partition@7f0000 { + label = "art"; + reg = <0x7f0000 0x010000>; + read-only; + }; +}; diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.dtsi b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.dtsi index be691a843b..9e6d23de4e 100644 --- a/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.dtsi +++ b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.dtsi @@ -26,12 +26,6 @@ label = "firmware"; reg = <0x040000 0x5e0000>; }; - - partition@620000 { - label = "partition-table"; - reg = <0x620000 0x010000>; - read-only; - }; }; ð0 { diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index b759bfb5f6..c812f283af 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -324,7 +324,8 @@ tplink,tl-mr6400-v1) ;; tplink,tl-wpa8630-v1|\ tplink,tl-wpa8630p-v2-eu|\ -tplink,tl-wpa8630p-v2-int) +tplink,tl-wpa8630p-v2-int|\ +tplink,tl-wpa8630p-v2.1-eu) ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x3c" ;; tplink,tl-wr842n-v2) diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 5d23e0589e..58ff2aa6eb 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -324,7 +324,8 @@ ath79_setup_interfaces() ;; tplink,tl-wpa8630-v1|\ tplink,tl-wpa8630p-v2-eu|\ - tplink,tl-wpa8630p-v2-int) + tplink,tl-wpa8630p-v2-int|\ + tplink,tl-wpa8630p-v2.1-eu) # port 5 (internal) is the power-line port ucidef_add_switch "switch0" \ "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4" diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 89a64fbf35..248b436c72 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -198,7 +198,8 @@ case "$FIRMWARE" in ;; tplink,eap225-wall-v2|\ tplink,tl-wpa8630p-v2-eu|\ - tplink,tl-wpa8630p-v2-int) + tplink,tl-wpa8630p-v2-int|\ + tplink,tl-wpa8630p-v2.1-eu) caldata_extract "art" 0x5000 0x2f20 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1) ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index 22d1ac8a9e..a2fbf712db 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -564,6 +564,13 @@ define Device/tplink_tl-wpa8630p-v2-int endef TARGET_DEVICES += tplink_tl-wpa8630p-v2-int +define Device/tplink_tl-wpa8630p-v2.1-eu + $(Device/tplink_tl-wpa8630p-v2) + DEVICE_VARIANT := v2.1 (EU) + TPLINK_BOARD_ID := TL-WPA8630P-V2.1-EU +endef +TARGET_DEVICES += tplink_tl-wpa8630p-v2.1-eu + define Device/tplink_tl-wr1043nd-v1 $(Device/tplink-8m) SOC := ar9132 diff --git a/tools/firmware-utils/Makefile b/tools/firmware-utils/Makefile index 39c3503886..7f1754a347 100644 --- a/tools/firmware-utils/Makefile +++ b/tools/firmware-utils/Makefile @@ -7,7 +7,7 @@ include $(TOPDIR)/rules.mk PKG_NAME := firmware-utils -PKG_RELEASE := 3 +PKG_RELEASE := 4 include $(INCLUDE_DIR)/host-build.mk include $(INCLUDE_DIR)/kernel.mk diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c index 82166a9ebb..eececeaf61 100644 --- a/tools/firmware-utils/src/tplink-safeloader.c +++ b/tools/firmware-utils/src/tplink-safeloader.c @@ -1513,6 +1513,41 @@ static struct device_info boards[] = { .last_sysupgrade_partition = "file-system" }, + /** Firmware layout for the TL-WPA8630P v2.1 (EU)*/ + { + .id = "TL-WPA8630P-V2.1-EU", + .vendor = "", + .support_list = + "SupportList:\n" + "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:45550000}\n", + .support_trail = '\x00', + .soft_ver = NULL, + + .partitions = { + {"factory-uboot", 0x00000, 0x20000}, + {"fs-uboot", 0x20000, 0x20000}, + {"firmware", 0x40000, 0x5e0000}, + {"extra-para", 0x680000, 0x01000}, + {"product-info", 0x690000, 0x01000}, + {"partition-table", 0x6a0000, 0x02000}, + {"soft-version", 0x6b0000, 0x01000}, + {"support-list", 0x6b1000, 0x01000}, + {"profile", 0x6b2000, 0x08000}, + {"user-config", 0x6c0000, 0x10000}, + {"default-config", 0x6d0000, 0x10000}, + {"default-nvm", 0x6e0000, 0xc0000}, + {"default-pib", 0x7a0000, 0x40000}, + {"default-mac", 0x7e0000, 0x00020}, + {"pin", 0x7e0100, 0x00020}, + {"device-id", 0x7e0200, 0x00030}, + {"radio", 0x7f0000, 0x10000}, + {NULL, 0, 0} + }, + + .first_sysupgrade_partition = "os-image", + .last_sysupgrade_partition = "file-system" + }, + /** Firmware layout for the TL-WR1043 v5 */ { .id = "TLWR1043NV5",