From: Jose Abreu Date: Tue, 11 Jun 2019 15:18:47 +0000 (+0200) Subject: net: stmmac: Convert to phylink and remove phylib logic X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=74371272f97fd1a7b668f1da34aea4ae737c2fa1;p=openwrt%2Fstaging%2Fblogic.git net: stmmac: Convert to phylink and remove phylib logic Convert everything to phylink. Signed-off-by: Jose Abreu Cc: Joao Pinto Cc: David S. Miller Cc: Giuseppe Cavallaro Cc: Alexandre Torgue Cc: Russell King Cc: Andrew Lunn Cc: Florian Fainelli Cc: Heiner Kallweit Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index cf0c9f4f347a..c43e2da4e7e3 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -3,7 +3,6 @@ config STMMAC_ETH tristate "STMicroelectronics 10/100/1000/EQOS Ethernet driver" depends on HAS_IOMEM && HAS_DMA select MII - select PHYLIB select PHYLINK select CRC32 imply PTP_1588_CLOCK @@ -42,7 +41,6 @@ if STMMAC_PLATFORM config DWMAC_DWC_QOS_ETH tristate "Support for snps,dwc-qos-ethernet.txt DT binding." - select PHYLIB select CRC32 select MII depends on OF && HAS_DMA diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h index b8386778f6c6..15523a4546f1 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h @@ -24,7 +24,6 @@ #include #include -#include #include #include #include "common.h" @@ -148,9 +147,7 @@ struct stmmac_priv { /* Generic channel for NAPI */ struct stmmac_channel channel[STMMAC_CH_MAX]; - bool oldlink; int speed; - int oldduplex; unsigned int flow_ctrl; unsigned int pause; struct mii_bus *mii; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c index cec51ba34296..7729aa555a19 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include #include #include @@ -274,7 +274,6 @@ static int stmmac_ethtool_get_link_ksettings(struct net_device *dev, struct ethtool_link_ksettings *cmd) { struct stmmac_priv *priv = netdev_priv(dev); - struct phy_device *phy = dev->phydev; if (priv->hw->pcs & STMMAC_PCS_RGMII || priv->hw->pcs & STMMAC_PCS_SGMII) { @@ -353,18 +352,7 @@ static int stmmac_ethtool_get_link_ksettings(struct net_device *dev, return 0; } - if (phy == NULL) { - pr_err("%s: %s: PHY is not registered\n", - __func__, dev->name); - return -ENODEV; - } - if (!netif_running(dev)) { - pr_err("%s: interface is disabled: we cannot track " - "link speed / duplex setting\n", dev->name); - return -EBUSY; - } - phy_ethtool_ksettings_get(phy, cmd); - return 0; + return phylink_ethtool_ksettings_get(priv->phylink, cmd); } static int @@ -372,8 +360,6 @@ stmmac_ethtool_set_link_ksettings(struct net_device *dev, const struct ethtool_link_ksettings *cmd) { struct stmmac_priv *priv = netdev_priv(dev); - struct phy_device *phy = dev->phydev; - int rc; if (priv->hw->pcs & STMMAC_PCS_RGMII || priv->hw->pcs & STMMAC_PCS_SGMII) { @@ -397,9 +383,7 @@ stmmac_ethtool_set_link_ksettings(struct net_device *dev, return 0; } - rc = phy_ethtool_ksettings_set(phy, cmd); - - return rc; + return phylink_ethtool_ksettings_set(priv->phylink, cmd); } static u32 stmmac_ethtool_getmsglevel(struct net_device *dev) @@ -443,6 +427,13 @@ static void stmmac_ethtool_gregs(struct net_device *dev, NUM_DWMAC1000_DMA_REGS * 4); } +static int stmmac_nway_reset(struct net_device *dev) +{ + struct stmmac_priv *priv = netdev_priv(dev); + + return phylink_ethtool_nway_reset(priv->phylink); +} + static void stmmac_get_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *pause) @@ -450,28 +441,13 @@ stmmac_get_pauseparam(struct net_device *netdev, struct stmmac_priv *priv = netdev_priv(netdev); struct rgmii_adv adv_lp; - pause->rx_pause = 0; - pause->tx_pause = 0; - if (priv->hw->pcs && !stmmac_pcs_get_adv_lp(priv, priv->ioaddr, &adv_lp)) { pause->autoneg = 1; if (!adv_lp.pause) return; } else { - if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, - netdev->phydev->supported) || - !linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, - netdev->phydev->supported)) - return; + phylink_ethtool_get_pauseparam(priv->phylink, pause); } - - pause->autoneg = netdev->phydev->autoneg; - - if (priv->flow_ctrl & FLOW_RX) - pause->rx_pause = 1; - if (priv->flow_ctrl & FLOW_TX) - pause->tx_pause = 1; - } static int @@ -479,39 +455,16 @@ stmmac_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *pause) { struct stmmac_priv *priv = netdev_priv(netdev); - u32 tx_cnt = priv->plat->tx_queues_to_use; - struct phy_device *phy = netdev->phydev; - int new_pause = FLOW_OFF; struct rgmii_adv adv_lp; if (priv->hw->pcs && !stmmac_pcs_get_adv_lp(priv, priv->ioaddr, &adv_lp)) { pause->autoneg = 1; if (!adv_lp.pause) return -EOPNOTSUPP; + return 0; } else { - if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, - phy->supported) || - !linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, - phy->supported)) - return -EOPNOTSUPP; + return phylink_ethtool_set_pauseparam(priv->phylink, pause); } - - if (pause->rx_pause) - new_pause |= FLOW_RX; - if (pause->tx_pause) - new_pause |= FLOW_TX; - - priv->flow_ctrl = new_pause; - phy->autoneg = pause->autoneg; - - if (phy->autoneg) { - if (netif_running(netdev)) - return phy_start_aneg(phy); - } - - stmmac_flow_ctrl(priv, priv->hw, phy->duplex, priv->flow_ctrl, - priv->pause, tx_cnt); - return 0; } static void stmmac_get_ethtool_stats(struct net_device *dev, @@ -549,7 +502,7 @@ static void stmmac_get_ethtool_stats(struct net_device *dev, } } if (priv->eee_enabled) { - int val = phy_get_eee_err(dev->phydev); + int val = phylink_get_eee_err(priv->phylink); if (val) priv->xstats.phy_eee_wakeup_error_n = val; } @@ -694,7 +647,7 @@ static int stmmac_ethtool_op_get_eee(struct net_device *dev, edata->eee_active = priv->eee_active; edata->tx_lpi_timer = priv->tx_lpi_timer; - return phy_ethtool_get_eee(dev->phydev, edata); + return phylink_ethtool_get_eee(priv->phylink, edata); } static int stmmac_ethtool_op_set_eee(struct net_device *dev, @@ -715,7 +668,7 @@ static int stmmac_ethtool_op_set_eee(struct net_device *dev, return -EOPNOTSUPP; } - ret = phy_ethtool_set_eee(dev->phydev, edata); + ret = phylink_ethtool_set_eee(priv->phylink, edata); if (ret) return ret; @@ -892,7 +845,7 @@ static const struct ethtool_ops stmmac_ethtool_ops = { .get_regs = stmmac_ethtool_gregs, .get_regs_len = stmmac_ethtool_get_regs_len, .get_link = ethtool_op_get_link, - .nway_reset = phy_ethtool_nway_reset, + .nway_reset = stmmac_nway_reset, .get_pauseparam = stmmac_get_pauseparam, .set_pauseparam = stmmac_set_pauseparam, .self_test = stmmac_selftest_run, diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index e2e69cb08fef..ad007d8bf9d7 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -328,21 +328,6 @@ static inline u32 stmmac_rx_dirty(struct stmmac_priv *priv, u32 queue) return dirty; } -/** - * stmmac_hw_fix_mac_speed - callback for speed selection - * @priv: driver private structure - * Description: on some platforms (e.g. ST), some HW system configuration - * registers have to be set according to the link speed negotiated. - */ -static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv) -{ - struct net_device *ndev = priv->dev; - struct phy_device *phydev = ndev->phydev; - - if (likely(priv->plat->fix_mac_speed)) - priv->plat->fix_mac_speed(priv->plat->bsp_priv, phydev->speed); -} - /** * stmmac_enable_eee_mode - check and enter in LPI mode * @priv: driver private structure @@ -406,14 +391,7 @@ static void stmmac_eee_ctrl_timer(struct timer_list *t) */ bool stmmac_eee_init(struct stmmac_priv *priv) { - struct net_device *ndev = priv->dev; - int interface = priv->plat->interface; - bool ret = false; - - if ((interface != PHY_INTERFACE_MODE_MII) && - (interface != PHY_INTERFACE_MODE_GMII) && - !phy_interface_mode_is_rgmii(interface)) - goto out; + int tx_lpi_timer = priv->tx_lpi_timer; /* Using PCS we cannot dial with the phy registers at this stage * so we do not support extra feature like EEE. @@ -421,52 +399,32 @@ bool stmmac_eee_init(struct stmmac_priv *priv) if ((priv->hw->pcs == STMMAC_PCS_RGMII) || (priv->hw->pcs == STMMAC_PCS_TBI) || (priv->hw->pcs == STMMAC_PCS_RTBI)) - goto out; - - /* MAC core supports the EEE feature. */ - if (priv->dma_cap.eee) { - int tx_lpi_timer = priv->tx_lpi_timer; - - /* Check if the PHY supports EEE */ - if (phy_init_eee(ndev->phydev, 1)) { - /* To manage at run-time if the EEE cannot be supported - * anymore (for example because the lp caps have been - * changed). - * In that case the driver disable own timers. - */ - mutex_lock(&priv->lock); - if (priv->eee_active) { - netdev_dbg(priv->dev, "disable EEE\n"); - del_timer_sync(&priv->eee_ctrl_timer); - stmmac_set_eee_timer(priv, priv->hw, 0, - tx_lpi_timer); - } - priv->eee_active = 0; - mutex_unlock(&priv->lock); - goto out; - } - /* Activate the EEE and start timers */ - mutex_lock(&priv->lock); - if (!priv->eee_active) { - priv->eee_active = 1; - timer_setup(&priv->eee_ctrl_timer, - stmmac_eee_ctrl_timer, 0); - mod_timer(&priv->eee_ctrl_timer, - STMMAC_LPI_T(eee_timer)); - - stmmac_set_eee_timer(priv, priv->hw, - STMMAC_DEFAULT_LIT_LS, tx_lpi_timer); - } - /* Set HW EEE according to the speed */ - stmmac_set_eee_pls(priv, priv->hw, ndev->phydev->link); + return false; - ret = true; - mutex_unlock(&priv->lock); + /* Check if MAC core supports the EEE feature. */ + if (!priv->dma_cap.eee) + return false; + + mutex_lock(&priv->lock); - netdev_dbg(priv->dev, "Energy-Efficient Ethernet initialized\n"); + /* Check if it needs to be deactivated */ + if (!priv->eee_active && priv->eee_enabled) { + netdev_dbg(priv->dev, "disable EEE\n"); + del_timer_sync(&priv->eee_ctrl_timer); + stmmac_set_eee_timer(priv, priv->hw, 0, tx_lpi_timer); + return false; } -out: - return ret; + + if (priv->eee_active && !priv->eee_enabled) { + timer_setup(&priv->eee_ctrl_timer, stmmac_eee_ctrl_timer, 0); + mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(eee_timer)); + stmmac_set_eee_timer(priv, priv->hw, STMMAC_DEFAULT_LIT_LS, + tx_lpi_timer); + } + + mutex_unlock(&priv->lock); + netdev_dbg(priv->dev, "Energy-Efficient Ethernet initialized\n"); + return true; } /* stmmac_get_tx_hwtstamp - get HW TX timestamps @@ -882,54 +840,42 @@ static int stmmac_mac_link_state(struct phylink_config *config, return -EOPNOTSUPP; } -static void stmmac_mac_config(struct net_device *dev) +static void stmmac_mac_config(struct phylink_config *config, unsigned int mode, + const struct phylink_link_state *state) { - struct stmmac_priv *priv = netdev_priv(dev); - struct phy_device *phydev = dev->phydev; + struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev)); u32 ctrl; ctrl = readl(priv->ioaddr + MAC_CTRL_REG); + ctrl &= ~priv->hw->link.speed_mask; - if (phydev->speed != priv->speed) { - ctrl &= ~priv->hw->link.speed_mask; - - switch (phydev->speed) { - case SPEED_1000: - ctrl |= priv->hw->link.speed1000; - break; - case SPEED_100: - ctrl |= priv->hw->link.speed100; - break; - case SPEED_10: - ctrl |= priv->hw->link.speed10; - break; - default: - netif_warn(priv, link, priv->dev, - "broken speed: %d\n", phydev->speed); - phydev->speed = SPEED_UNKNOWN; - break; - } - - if (phydev->speed != SPEED_UNKNOWN) - stmmac_hw_fix_mac_speed(priv); - - priv->speed = phydev->speed; + switch (state->speed) { + case SPEED_1000: + ctrl |= priv->hw->link.speed1000; + break; + case SPEED_100: + ctrl |= priv->hw->link.speed100; + break; + case SPEED_10: + ctrl |= priv->hw->link.speed10; + break; + default: + return; } - /* Now we make sure that we can be in full duplex mode. - * If not, we operate in half-duplex mode. */ - if (phydev->duplex != priv->oldduplex) { - if (!phydev->duplex) - ctrl &= ~priv->hw->link.duplex; - else - ctrl |= priv->hw->link.duplex; + priv->speed = state->speed; - priv->oldduplex = phydev->duplex; - } + if (priv->plat->fix_mac_speed) + priv->plat->fix_mac_speed(priv->plat->bsp_priv, state->speed); + + if (!state->duplex) + ctrl &= ~priv->hw->link.duplex; + else + ctrl |= priv->hw->link.duplex; /* Flow Control operation */ - if (phydev->pause) - stmmac_mac_flow_ctrl(priv, phydev->duplex); + if (state->pause) + stmmac_mac_flow_ctrl(priv, state->duplex); writel(ctrl, priv->ioaddr + MAC_CTRL_REG); } @@ -939,85 +885,40 @@ static void stmmac_mac_an_restart(struct phylink_config *config) /* Not Supported */ } -static void stmmac_mac_link_down(struct net_device *dev, bool autoneg) +static void stmmac_mac_link_down(struct phylink_config *config, + unsigned int mode, phy_interface_t interface) { - struct stmmac_priv *priv = netdev_priv(dev); + struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev)); stmmac_mac_set(priv, priv->ioaddr, false); + priv->eee_active = false; + stmmac_eee_init(priv); + stmmac_set_eee_pls(priv, priv->hw, false); } -static void stmmac_mac_link_up(struct net_device *dev, bool autoneg) +static void stmmac_mac_link_up(struct phylink_config *config, + unsigned int mode, phy_interface_t interface, + struct phy_device *phy) { - struct stmmac_priv *priv = netdev_priv(dev); + struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev)); stmmac_mac_set(priv, priv->ioaddr, true); + if (phy) { + priv->eee_active = phy_init_eee(phy, 1) >= 0; + priv->eee_enabled = stmmac_eee_init(priv); + stmmac_set_eee_pls(priv, priv->hw, true); + } } -static const struct phylink_mac_ops __maybe_unused stmmac_phylink_mac_ops = { +static const struct phylink_mac_ops stmmac_phylink_mac_ops = { .validate = stmmac_validate, .mac_link_state = stmmac_mac_link_state, - .mac_config = NULL, /* TO BE FILLED */ + .mac_config = stmmac_mac_config, .mac_an_restart = stmmac_mac_an_restart, - .mac_link_down = NULL, /* TO BE FILLED */ - .mac_link_up = NULL, /* TO BE FILLED */ + .mac_link_down = stmmac_mac_link_down, + .mac_link_up = stmmac_mac_link_up, }; -/** - * stmmac_adjust_link - adjusts the link parameters - * @dev: net device structure - * Description: this is the helper called by the physical abstraction layer - * drivers to communicate the phy link status. According the speed and duplex - * this driver can invoke registered glue-logic as well. - * It also invoke the eee initialization because it could happen when switch - * on different networks (that are eee capable). - */ -static void stmmac_adjust_link(struct net_device *dev) -{ - struct stmmac_priv *priv = netdev_priv(dev); - struct phy_device *phydev = dev->phydev; - bool new_state = false; - - if (!phydev) - return; - - mutex_lock(&priv->lock); - - if (phydev->link) { - stmmac_mac_config(dev); - - if (!priv->oldlink) { - new_state = true; - priv->oldlink = true; - } - } else if (priv->oldlink) { - new_state = true; - priv->oldlink = false; - priv->speed = SPEED_UNKNOWN; - priv->oldduplex = DUPLEX_UNKNOWN; - } - - if (phydev->link) - stmmac_mac_link_up(dev, false); - else - stmmac_mac_link_down(dev, false); - - if (new_state && netif_msg_link(priv)) - phy_print_status(phydev); - - mutex_unlock(&priv->lock); - - if (phydev->is_pseudo_fixed_link) - /* Stop PHY layer to call the hook to adjust the link in case - * of a switch is attached to the stmmac driver. - */ - phydev->irq = PHY_IGNORE_INTERRUPT; - else - /* At this stage, init the EEE if supported. - * Never called in case of fixed_link. - */ - priv->eee_enabled = stmmac_eee_init(priv); -} - /** * stmmac_check_pcs_mode - verify if RGMII/SGMII is supported * @priv: driver private structure @@ -1054,79 +955,44 @@ static void stmmac_check_pcs_mode(struct stmmac_priv *priv) static int stmmac_init_phy(struct net_device *dev) { struct stmmac_priv *priv = netdev_priv(dev); - u32 tx_cnt = priv->plat->tx_queues_to_use; - struct phy_device *phydev; - char phy_id_fmt[MII_BUS_ID_SIZE + 3]; - char bus_id[MII_BUS_ID_SIZE]; - int interface = priv->plat->interface; - int max_speed = priv->plat->max_speed; - priv->oldlink = false; - priv->speed = SPEED_UNKNOWN; - priv->oldduplex = DUPLEX_UNKNOWN; - - if (priv->plat->phy_node) { - phydev = of_phy_connect(dev, priv->plat->phy_node, - &stmmac_adjust_link, 0, interface); - } else { - snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x", - priv->plat->bus_id); + struct device_node *node; + int ret; - snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id, - priv->plat->phy_addr); - netdev_dbg(priv->dev, "%s: trying to attach to %s\n", __func__, - phy_id_fmt); + node = priv->plat->phy_node; - phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link, - interface); - } + if (node) { + ret = phylink_of_phy_connect(priv->phylink, node, 0); + } else { + int addr = priv->plat->phy_addr; + struct phy_device *phydev; - if (IS_ERR_OR_NULL(phydev)) { - netdev_err(priv->dev, "Could not attach to PHY\n"); - if (!phydev) + phydev = mdiobus_get_phy(priv->mii, addr); + if (!phydev) { + netdev_err(priv->dev, "no phy at addr %d\n", addr); return -ENODEV; + } - return PTR_ERR(phydev); + ret = phylink_connect_phy(priv->phylink, phydev); } - /* Stop Advertising 1000BASE Capability if interface is not GMII */ - if ((interface == PHY_INTERFACE_MODE_MII) || - (interface == PHY_INTERFACE_MODE_RMII) || - (max_speed < 1000 && max_speed > 0)) - phy_set_max_speed(phydev, SPEED_100); + return ret; +} - /* - * Half-duplex mode not supported with multiqueue - * half-duplex can only works with single queue - */ - if (tx_cnt > 1) { - phy_remove_link_mode(phydev, - ETHTOOL_LINK_MODE_10baseT_Half_BIT); - phy_remove_link_mode(phydev, - ETHTOOL_LINK_MODE_100baseT_Half_BIT); - phy_remove_link_mode(phydev, - ETHTOOL_LINK_MODE_1000baseT_Half_BIT); - } +static int stmmac_phy_setup(struct stmmac_priv *priv) +{ + struct device_node *node = priv->plat->phy_node; + int mode = priv->plat->interface; + struct phylink *phylink; - /* - * Broken HW is sometimes missing the pull-up resistor on the - * MDIO line, which results in reads to non-existent devices returning - * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent - * device as well. - * Note: phydev->phy_id is the result of reading the UID PHY registers. - */ - if (!priv->plat->phy_node && phydev->phy_id == 0) { - phy_disconnect(phydev); - return -ENODEV; - } + priv->phylink_config.dev = &priv->dev->dev; + priv->phylink_config.type = PHYLINK_NETDEV; - /* stmmac_adjust_link will change this to PHY_IGNORE_INTERRUPT to avoid - * subsequent PHY polling, make sure we force a link transition if - * we have a UP/DOWN/UP transition - */ - if (phydev->is_pseudo_fixed_link) - phydev->irq = PHY_POLL; + phylink = phylink_create(&priv->phylink_config, of_fwnode_handle(node), + mode, &stmmac_phylink_mac_ops); + if (IS_ERR(phylink)) + return PTR_ERR(phylink); - phy_attached_info(phydev); + priv->phylink = phylink; return 0; } @@ -2739,8 +2605,7 @@ static int stmmac_open(struct net_device *dev) stmmac_init_tx_coalesce(priv); - if (dev->phydev) - phy_start(dev->phydev); + phylink_start(priv->phylink); /* Request the IRQ lines */ ret = request_irq(dev->irq, stmmac_interrupt, @@ -2787,8 +2652,7 @@ lpiirq_error: wolirq_error: free_irq(dev->irq, dev); irq_error: - if (dev->phydev) - phy_stop(dev->phydev); + phylink_stop(priv->phylink); for (chan = 0; chan < priv->plat->tx_queues_to_use; chan++) del_timer_sync(&priv->tx_queue[chan].txtimer); @@ -2797,9 +2661,7 @@ irq_error: init_error: free_dma_desc_resources(priv); dma_desc_error: - if (dev->phydev) - phy_disconnect(dev->phydev); - + phylink_disconnect_phy(priv->phylink); return ret; } @@ -2818,10 +2680,8 @@ static int stmmac_release(struct net_device *dev) del_timer_sync(&priv->eee_ctrl_timer); /* Stop and disconnect the PHY */ - if (dev->phydev) { - phy_stop(dev->phydev); - phy_disconnect(dev->phydev); - } + phylink_stop(priv->phylink); + phylink_disconnect_phy(priv->phylink); stmmac_stop_all_queues(priv); @@ -3878,6 +3738,7 @@ static void stmmac_poll_controller(struct net_device *dev) */ static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { + struct stmmac_priv *priv = netdev_priv (dev); int ret = -EOPNOTSUPP; if (!netif_running(dev)) @@ -3887,9 +3748,7 @@ static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) case SIOCGMIIPHY: case SIOCGMIIREG: case SIOCSMIIREG: - if (!dev->phydev) - return -EINVAL; - ret = phy_mii_ioctl(dev->phydev, rq, cmd); + ret = phylink_mii_ioctl(priv->phylink, rq, cmd); break; case SIOCSHWTSTAMP: ret = stmmac_hwtstamp_set(dev, rq); @@ -4480,6 +4339,12 @@ int stmmac_dvr_probe(struct device *device, } } + ret = stmmac_phy_setup(priv); + if (ret) { + netdev_err(ndev, "failed to setup phy (%d)\n", ret); + goto error_phy_setup; + } + ret = register_netdev(ndev); if (ret) { dev_err(priv->device, "%s: ERROR %i registering the device\n", @@ -4497,6 +4362,8 @@ int stmmac_dvr_probe(struct device *device, return ret; error_netdev_register: + phylink_destroy(priv->phylink); +error_phy_setup: if (priv->hw->pcs != STMMAC_PCS_RGMII && priv->hw->pcs != STMMAC_PCS_TBI && priv->hw->pcs != STMMAC_PCS_RTBI) @@ -4538,6 +4405,7 @@ int stmmac_dvr_remove(struct device *dev) stmmac_mac_set(priv, priv->ioaddr, false); netif_carrier_off(ndev); unregister_netdev(ndev); + phylink_destroy(priv->phylink); if (priv->plat->stmmac_rst) reset_control_assert(priv->plat->stmmac_rst); clk_disable_unprepare(priv->plat->pclk); @@ -4568,8 +4436,7 @@ int stmmac_suspend(struct device *dev) if (!ndev || !netif_running(ndev)) return 0; - if (ndev->phydev) - phy_stop(ndev->phydev); + phylink_stop(priv->phylink); mutex_lock(&priv->lock); @@ -4594,9 +4461,7 @@ int stmmac_suspend(struct device *dev) } mutex_unlock(&priv->lock); - priv->oldlink = false; priv->speed = SPEED_UNKNOWN; - priv->oldduplex = DUPLEX_UNKNOWN; return 0; } EXPORT_SYMBOL_GPL(stmmac_suspend); @@ -4680,8 +4545,7 @@ int stmmac_resume(struct device *dev) mutex_unlock(&priv->lock); - if (ndev->phydev) - phy_start(ndev->phydev); + phylink_start(priv->phylink); return 0; } diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index f45bfbef97d0..898f94aced53 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -333,21 +333,6 @@ static int stmmac_dt_phy(struct plat_stmmacenet_data *plat, {}, }; - /* If phy-handle property is passed from DT, use it as the PHY */ - plat->phy_node = of_parse_phandle(np, "phy-handle", 0); - if (plat->phy_node) - dev_dbg(dev, "Found phy-handle subnode\n"); - - /* If phy-handle is not specified, check if we have a fixed-phy */ - if (!plat->phy_node && of_phy_is_fixed_link(np)) { - if ((of_phy_register_fixed_link(np) < 0)) - return -ENODEV; - - dev_dbg(dev, "Found fixed-link subnode\n"); - plat->phy_node = of_node_get(np); - mdio = false; - } - if (of_match_node(need_mdio_ids, np)) { plat->mdio_node = of_get_child_by_name(np, "mdio"); } else { @@ -396,6 +381,7 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac) *mac = of_get_mac_address(np); plat->interface = of_get_phy_mode(np); + plat->phy_node = np; /* Get max speed of operation from device tree */ if (of_property_read_u32(np, "max-speed", &plat->max_speed)) @@ -591,11 +577,6 @@ error_pclk_get: void stmmac_remove_config_dt(struct platform_device *pdev, struct plat_stmmacenet_data *plat) { - struct device_node *np = pdev->dev.of_node; - - if (of_phy_is_fixed_link(np)) - of_phy_deregister_fixed_link(np); - of_node_put(plat->phy_node); of_node_put(plat->mdio_node); } #else