From: Maxime Ripard <maxime.ripard@bootlin.com>
Date: Mon, 16 Apr 2018 14:22:59 +0000 (+0200)
Subject: mmc: sunxi: Reorder the headers
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=743b819e4178935e3f098e5f13db301f532fa9e0;p=openwrt%2Fstaging%2Fblogic.git

mmc: sunxi: Reorder the headers

Our headers sort algorithm has had pretty chaotic results. Let's fix that.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---

diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index 20cfb20418f3..91feed8045fd 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -13,36 +13,33 @@
  * the License, or (at your option) any later version.
  */
 
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-
 #include <linux/clk.h>
 #include <linux/clk/sunxi-ng.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/spinlock.h>
-#include <linux/scatterlist.h>
+#include <linux/delay.h>
+#include <linux/device.h>
 #include <linux/dma-mapping.h>
-#include <linux/slab.h>
-#include <linux/reset.h>
-#include <linux/regulator/consumer.h>
-
-#include <linux/of_address.h>
-#include <linux/of_gpio.h>
-#include <linux/of_platform.h>
-
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/core.h>
 #include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
 #include <linux/mmc/sd.h>
 #include <linux/mmc/sdio.h>
-#include <linux/mmc/mmc.h>
-#include <linux/mmc/core.h>
-#include <linux/mmc/card.h>
 #include <linux/mmc/slot-gpio.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/scatterlist.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
 
 /* register offset definitions */
 #define SDXC_REG_GCTRL	(0x00) /* SMC Global Control Register */