From: Koen Vandeputte Date: Wed, 11 Sep 2019 21:40:42 +0000 (+0200) Subject: Revert "ar71xx: use platform code for qca955x usb0 init" X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=7489ea85a2596020587ba3202a55821075aa913f;p=openwrt%2Fstaging%2Fjogo.git Revert "ar71xx: use platform code for qca955x usb0 init" This reverts commit 5b98061bb1ac7e3affadda7b55c6f4ed4eb8268e. As Piotr Dymacz pointed out: In QCA MIPS based WiSOCs, for first USB interface, device/host mode can be selected _only_ in hardware see description of 57c641ba6e QCA955x and QCA9563, second USB can be switched to device mode in software (tested and confirmed on real hardware). Signed-off-by: Koen Vandeputte --- diff --git a/target/linux/ar71xx/patches-4.14/951-qca955x-usb0-platform.patch b/target/linux/ar71xx/patches-4.14/951-qca955x-usb0-platform.patch deleted file mode 100644 index 0325f80921..0000000000 --- a/target/linux/ar71xx/patches-4.14/951-qca955x-usb0-platform.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- a/arch/mips/ath79/dev-usb.c -+++ b/arch/mips/ath79/dev-usb.c -@@ -317,7 +317,10 @@ static void __init qca955x_usb_setup(voi - { - ath79_ehci_pdata_v2.reset_notifier = qca955x_usb_reset_notifier; - -- ar9xxx_ci_usb_setup(0, ATH79_IP3_IRQ(0)); -+ ath79_usb_register("ehci-platform", 0, -+ QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE, -+ ATH79_IP3_IRQ(0), -+ &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); - - ath79_usb_register("ehci-platform", 1, - QCA955X_EHCI1_BASE, QCA955X_EHCI_SIZE,