From: Ben Whitten Date: Sat, 4 Jun 2016 08:06:04 +0000 (+0100) Subject: generic: remove brcmfmac-sdio.h X-Git-Tag: v17.01.0-rc1~2483 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=7509658220970988e0529c5c33fc08de26de21ee;p=openwrt%2Fstaging%2Fchunkeey.git generic: remove brcmfmac-sdio.h This file is present in the kernel so no point overlaying it. Signed-off-by: Ben Whitten --- diff --git a/target/linux/generic/files/include/linux/platform_data/brcmfmac-sdio.h b/target/linux/generic/files/include/linux/platform_data/brcmfmac-sdio.h deleted file mode 100644 index 1ade657d5f..0000000000 --- a/target/linux/generic/files/include/linux/platform_data/brcmfmac-sdio.h +++ /dev/null @@ -1,124 +0,0 @@ -/* - * Copyright (c) 2013 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef _LINUX_BRCMFMAC_PLATFORM_H -#define _LINUX_BRCMFMAC_PLATFORM_H - -/* - * Platform specific driver functions and data. Through the platform specific - * device data functions can be provided to help the brcmfmac driver to - * operate with the device in combination with the used platform. - * - * Use the platform data in the following (similar) way: - * - * -#include - - -static void brcmfmac_power_on(void) -{ -} - -static void brcmfmac_power_off(void) -{ -} - -static void brcmfmac_reset(void) -{ -} - -static struct brcmfmac_sdio_platform_data brcmfmac_sdio_pdata = { - .power_on = brcmfmac_power_on, - .power_off = brcmfmac_power_off, - .reset = brcmfmac_reset -}; - -static struct platform_device brcmfmac_device = { - .name = BRCMFMAC_SDIO_PDATA_NAME, - .id = PLATFORM_DEVID_NONE, - .dev.platform_data = &brcmfmac_sdio_pdata -}; - -void __init brcmfmac_init_pdata(void) -{ - brcmfmac_sdio_pdata.oob_irq_supported = true; - brcmfmac_sdio_pdata.oob_irq_nr = gpio_to_irq(GPIO_BRCMF_SDIO_OOB); - brcmfmac_sdio_pdata.oob_irq_flags = IORESOURCE_IRQ | - IORESOURCE_IRQ_HIGHLEVEL; - platform_device_register(&brcmfmac_device); -} - * - * - * Note: the brcmfmac can be loaded as module or be statically built-in into - * the kernel. If built-in then do note that it uses module_init (and - * module_exit) routines which equal device_initcall. So if you intend to - * create a module with the platform specific data for the brcmfmac and have - * it built-in to the kernel then use a higher initcall then device_initcall - * (see init.h). If this is not done then brcmfmac will load without problems - * but will not pickup the platform data. - * - * When the driver does not "detect" platform driver data then it will continue - * without reporting anything and just assume there is no data needed. Which is - * probably true for most platforms. - * - * Explanation of the platform_data fields: - * - * drive_strength: is the preferred drive_strength to be used for the SDIO - * pins. If 0 then a default value will be used. This is the target drive - * strength, the exact drive strength which will be used depends on the - * capabilities of the device. - * - * oob_irq_supported: does the board have support for OOB interrupts. SDIO - * in-band interrupts are relatively slow and for having less overhead on - * interrupt processing an out of band interrupt can be used. If the HW - * supports this then enable this by setting this field to true and configure - * the oob related fields. - * - * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are - * used for registering the irq using request_irq function. - * - * power_on: This function is called by the brcmfmac when the module gets - * loaded. This can be particularly useful for low power devices. The platform - * spcific routine may for example decide to power up the complete device. - * If there is no use-case for this function then provide NULL. - * - * power_off: This function is called by the brcmfmac when the module gets - * unloaded. At this point the device can be powered down or otherwise be reset. - * So if an actual power_off is not supported but reset is then reset the device - * when this function gets called. This can be particularly useful for low power - * devices. If there is no use-case for this function (either power-down or - * reset) then provide NULL. - * - * reset: This function can get called if the device communication broke down. - * This functionality is particularly useful in case of SDIO type devices. It is - * possible to reset a dongle via sdio data interface, but it requires that - * this is fully functional. This function is chip/module specific and this - * function should return only after the complete reset has completed. - */ - -#define BRCMFMAC_SDIO_PDATA_NAME "brcmfmac_sdio" - -struct brcmfmac_sdio_platform_data { - unsigned int drive_strength; - bool oob_irq_supported; - unsigned int oob_irq_nr; - unsigned long oob_irq_flags; - void (*power_on)(void); - void (*power_off)(void); - void (*reset)(void); -}; - -#endif /* _LINUX_BRCMFMAC_PLATFORM_H */