From: Jian Shen <shenjian15@huawei.com>
Date: Thu, 20 Jun 2019 08:52:35 +0000 (+0800)
Subject: net: hns3: fix selftest fail issue for fibre port with autoneg on
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=7786a9969a1594d834ec55bc7ef8768909726170;p=openwrt%2Fstaging%2Fblogic.git

net: hns3: fix selftest fail issue for fibre port with autoneg on

When doing selftest for fibre port with autoneg on, the MAC speed
may be incorrect, which may cause the selftest failed. This patch
fixes it by halting autoneg during the selftest.

Fixes: 22f48e24a23d ("net: hns3: add autoneg and change speed support for fibre port")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index bf921ef06ba3..d78a5f6fa19c 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -264,6 +264,8 @@ struct hnae3_ae_dev {
  *   get auto autonegotiation of pause frame use
  * restart_autoneg()
  *   restart autonegotiation
+ * halt_autoneg()
+ *   halt/resume autonegotiation when autonegotiation on
  * get_coalesce_usecs()
  *   get usecs to delay a TX interrupt after a packet is sent
  * get_rx_max_coalesced_frames()
@@ -383,6 +385,7 @@ struct hnae3_ae_ops {
 	int (*set_autoneg)(struct hnae3_handle *handle, bool enable);
 	int (*get_autoneg)(struct hnae3_handle *handle);
 	int (*restart_autoneg)(struct hnae3_handle *handle);
+	int (*halt_autoneg)(struct hnae3_handle *handle, bool halt);
 
 	void (*get_coalesce_usecs)(struct hnae3_handle *handle,
 				   u32 *tx_usecs, u32 *rx_usecs);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index 0998647da15d..16034afc43f9 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -336,6 +336,13 @@ static void hns3_self_test(struct net_device *ndev,
 		h->ae_algo->ops->enable_vlan_filter(h, false);
 #endif
 
+	/* Tell firmware to stop mac autoneg before loopback test start,
+	 * otherwise loopback test may be failed when the port is still
+	 * negotiating.
+	 */
+	if (h->ae_algo->ops->halt_autoneg)
+		h->ae_algo->ops->halt_autoneg(h, true);
+
 	set_bit(HNS3_NIC_STATE_TESTING, &priv->state);
 
 	for (i = 0; i < HNS3_SELF_TEST_TYPE_NUM; i++) {
@@ -358,6 +365,9 @@ static void hns3_self_test(struct net_device *ndev,
 
 	clear_bit(HNS3_NIC_STATE_TESTING, &priv->state);
 
+	if (h->ae_algo->ops->halt_autoneg)
+		h->ae_algo->ops->halt_autoneg(h, false);
+
 #if IS_ENABLED(CONFIG_VLAN_8021Q)
 	if (dis_vlan_filter)
 		h->ae_algo->ops->enable_vlan_filter(h, true);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index fbf0c207b6bf..b328662418ed 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2315,6 +2315,17 @@ static int hclge_restart_autoneg(struct hnae3_handle *handle)
 	return hclge_notify_client(hdev, HNAE3_UP_CLIENT);
 }
 
+static int hclge_halt_autoneg(struct hnae3_handle *handle, bool halt)
+{
+	struct hclge_vport *vport = hclge_get_vport(handle);
+	struct hclge_dev *hdev = vport->back;
+
+	if (hdev->hw.mac.support_autoneg && hdev->hw.mac.autoneg)
+		return hclge_set_autoneg_en(hdev, !halt);
+
+	return 0;
+}
+
 static int hclge_set_fec_hw(struct hclge_dev *hdev, u32 fec_mode)
 {
 	struct hclge_config_fec_cmd *req;
@@ -9265,6 +9276,7 @@ static const struct hnae3_ae_ops hclge_ops = {
 	.set_autoneg = hclge_set_autoneg,
 	.get_autoneg = hclge_get_autoneg,
 	.restart_autoneg = hclge_restart_autoneg,
+	.halt_autoneg = hclge_halt_autoneg,
 	.get_pauseparam = hclge_get_pauseparam,
 	.set_pauseparam = hclge_set_pauseparam,
 	.set_mtu = hclge_set_mtu,