From: Loic Poulain <loic.poulain@gmail.com>
Date: Thu, 17 Aug 2017 17:59:48 +0000 (+0200)
Subject: dt-bindings: net: bluetooth: Add broadcom-bluetooth
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=778ead344acce7ad38df390f2f28b91118c9b2b0;p=openwrt%2Fstaging%2Fblogic.git

dt-bindings: net: bluetooth: Add broadcom-bluetooth

Add binding document for serial bluetooth chips using
Broadcom protocol.

Signed-off-by: Loic Poulain <loic.poulain@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---

diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
new file mode 100644
index 000000000000..4194ff7e6ee6
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
@@ -0,0 +1,35 @@
+Broadcom Bluetooth Chips
+---------------------
+
+This documents the binding structure and common properties for serial
+attached Broadcom devices.
+
+Serial attached Broadcom devices shall be a child node of the host UART
+device the slave device is attached to.
+
+Required properties:
+
+ - compatible: should contain one of the following:
+   * "brcm,bcm43438-bt"
+
+Optional properties:
+
+ - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt
+ - shutdown-gpios: GPIO specifier, used to enable the BT module
+ - device-wakeup-gpios: GPIO specifier, used to wakeup the controller
+ - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor
+ - clocks: clock specifier if external clock provided to the controller
+ - clock-names: should be "extclk"
+
+
+Example:
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart2_pins>;
+
+       bluetooth {
+               compatible = "brcm,bcm43438-bt";
+               max-speed = <921600>;
+       };
+};