From: Sergey Ryazanov Date: Sun, 6 Sep 2020 16:45:02 +0000 (+0300) Subject: ath25: fix preinit Ethernet port configuration X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=788aa61e1b6a81bbf4bbf71b961be4bee1bf0046;p=openwrt%2Fstaging%2Faparcar.git ath25: fix preinit Ethernet port configuration vconfig is no more installed by default to a firmware image. So, replace vconfig calls for VLAN subinterface configuration by coresponding ip-link commands. Also drop few useless comments from the preinit hook script, while we are at it. I have no chance to test this fix since I have no board with a subject switch IC, but this is still better then call an utility that is unavailable in the firmware for years. Signed-off-by: Sergey Ryazanov [use documented syntax for ip link add] Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ath25/base-files/lib/preinit/15_preinit_iface_atheros b/target/linux/ath25/base-files/lib/preinit/15_preinit_iface_atheros index 235ba4befc..b795aac45f 100644 --- a/target/linux/ath25/base-files/lib/preinit/15_preinit_iface_atheros +++ b/target/linux/ath25/base-files/lib/preinit/15_preinit_iface_atheros @@ -1,12 +1,10 @@ -# reset button only supported on ar5315+ at the moment preinit_ip() { if [ -z "$pi_ifname" ]; then grep -q 'Atheros AR231[567]' /proc/cpuinfo && { if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \ -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then - vconfig set_name_type DEV_PLUS_VID_NO_PAD ip link set eth0 up - vconfig add eth0 1 + ip link add link eth0 name eth0.1 type vlan id 1 ifname=eth0.1 else ifname=eth0 @@ -20,13 +18,10 @@ preinit_ip() { } } - -# reset button only supported on ar5315+ at the moment - preinit_ip_deconfig() { if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \ -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then - vconfig rem eth0.1 2>/dev/null + ip link del eth0.1 2>/dev/null ip link set $pi_ifname down elif [ -n "$pi_ifname" ]; then ip -4 addr flush dev $pi_ifname