From: Andre Heider Date: Tue, 21 Jun 2022 12:09:56 +0000 (+0200) Subject: arm-trusted-firmware-mvebu: update to v2.7 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=794cefd3e38a5e95e641747e423bba53f8e7590f;p=openwrt%2Fstaging%2Flynxis.git arm-trusted-firmware-mvebu: update to v2.7 Remove the backported patches and add another to allow building with the OpenWrt build system. Signed-off-by: Andre Heider --- diff --git a/package/boot/arm-trusted-firmware-mvebu/Makefile b/package/boot/arm-trusted-firmware-mvebu/Makefile index fe9756a590..57f3d0b79b 100644 --- a/package/boot/arm-trusted-firmware-mvebu/Makefile +++ b/package/boot/arm-trusted-firmware-mvebu/Makefile @@ -7,9 +7,9 @@ include $(TOPDIR)/rules.mk -PKG_VERSION:=2.5 +PKG_VERSION:=2.7 PKG_RELEASE:=$(AUTORELEASE) -PKG_HASH:=ad8a2ffcbcd12d919723da07630fc0840c3c2fba7656d1462e45488e42995d7c +PKG_HASH:=53422dc649153838e03820330ba17cb10afe3e330ecde0db11e4d5f1361a33e6 PKG_MAINTAINER:=Vladimir Vid @@ -209,10 +209,8 @@ define Build/Prepare mkdir -p $(STAGING_DIR_IMAGE) $(TAR) -C $(STAGING_DIR_IMAGE) -xf $(DL_DIR)/$(CRYPTOPP_SOURCE) $(TAR) -C $(STAGING_DIR_IMAGE) -xf $(DL_DIR)/$(A3700_UTILS_SOURCE) - echo "master" > $(STAGING_DIR_IMAGE)/$(A3700_UTILS_NAME)/branch.txt $(call PatchDir/Default,$(STAGING_DIR_IMAGE)/$(A3700_UTILS_NAME),./patches-a3700-utils) $(TAR) -C $(STAGING_DIR_IMAGE) -xf $(DL_DIR)/$(MV_DDR_SOURCE) - echo "master" > $(STAGING_DIR_IMAGE)/$(MV_DDR_NAME)/branch.txt $(call PatchDir/Default,$(STAGING_DIR_IMAGE)/$(MV_DDR_NAME),./patches-mv-ddr-marvell) $(TAR) -C $(STAGING_DIR_IMAGE) -xf $(DL_DIR)/$(MOX_BB_SOURCE) $(call PatchDir/Default,$(STAGING_DIR_IMAGE)/$(MOX_BB_NAME)-$(MOX_BB_RELEASE),./patches-mox-boot-builder) diff --git a/package/boot/arm-trusted-firmware-mvebu/patches/001-no-git.patch b/package/boot/arm-trusted-firmware-mvebu/patches/001-no-git.patch new file mode 100644 index 0000000000..71cd0f8ef9 --- /dev/null +++ b/package/boot/arm-trusted-firmware-mvebu/patches/001-no-git.patch @@ -0,0 +1,21 @@ +We're not building with full fledged git checkouts here, get rid of the +overzealous checks. + +--- a/plat/marvell/armada/a3k/common/a3700_common.mk ++++ b/plat/marvell/armada/a3k/common/a3700_common.mk +@@ -78,7 +78,6 @@ ifdef WTP + + # Do not remove! Following checks are required to ensure correct TF-A builds, removing these checks leads to broken TF-A builds + $(if $(wildcard $(value WTP)/*),,$(error "'WTP=$(value WTP)' was specified, but '$(value WTP)' directory does not exist")) +-$(if $(shell git -C $(value WTP) rev-parse --show-cdup 2>&1),$(error "'WTP=$(value WTP)' was specified, but '$(value WTP)' does not contain valid A3700-utils-marvell git repository")) + + TBB := $(WTP)/wtptp/src/TBB_Linux/release/TBB_linux + +@@ -164,7 +163,6 @@ $(TIMDDRTOOL): FORCE + # Do not remove! Following checks are required to ensure correct TF-A builds, removing these checks leads to broken TF-A builds + $(if $(value MV_DDR_PATH),,$(error "Platform '${PLAT}' for ddr tool requires MV_DDR_PATH. Please set MV_DDR_PATH to point to the right directory")) + $(if $(wildcard $(value MV_DDR_PATH)/*),,$(error "'MV_DDR_PATH=$(value MV_DDR_PATH)' was specified, but '$(value MV_DDR_PATH)' directory does not exist")) +- $(if $(shell git -C $(value MV_DDR_PATH) rev-parse --show-cdup 2>&1),$(error "'MV_DDR_PATH=$(value MV_DDR_PATH)' was specified, but '$(value MV_DDR_PATH)' does not contain valid mv-ddr-marvell git repository")) + $(Q)$(MAKE) --no-print-directory -C $(WTP) MV_DDR_PATH=$(MV_DDR_PATH) DDR_TOPOLOGY=$(DDR_TOPOLOGY) mv_ddr + + $(BUILD_PLAT)/$(UART_IMAGE): $(BUILD_PLAT)/$(BOOT_IMAGE) $(BUILD_PLAT)/wtmi.bin $(TBB) $(TIMBUILD) $(TIMDDRTOOL) diff --git a/package/boot/arm-trusted-firmware-mvebu/patches/100-fix-plat-marvell-a3720-uart-fix-UART-clock-rate-valu.patch b/package/boot/arm-trusted-firmware-mvebu/patches/100-fix-plat-marvell-a3720-uart-fix-UART-clock-rate-valu.patch deleted file mode 100644 index 6f887411b4..0000000000 --- a/package/boot/arm-trusted-firmware-mvebu/patches/100-fix-plat-marvell-a3720-uart-fix-UART-clock-rate-valu.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 66a7752834382595d26214783ae4698fd1f00bd6 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Pali=20Roh=C3=A1r?= -Date: Thu, 13 May 2021 14:53:44 +0200 -Subject: [PATCH] fix(plat/marvell/a3720/uart): fix UART clock rate value and - divisor calculation -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -UART parent clock is by default the platform's xtal clock, which is -25 MHz. - -The value defined in the driver, though, is 25.8048 MHz. This is a hack -for the suboptimal divisor calculation - Divisor = UART clock / (16 * baudrate) -which does not use rounding division, resulting in a suboptimal value -for divisor if the correct parent clock rate was used. - -Change the code for divisor calculation to - Divisor = Round(UART clock / (16 * baudrate)) -and change the parent clock rate value to 25 MHz. - -The final UART divisor for default baudrate 115200 is not affected by -this change. - -(Note that the parent clock rate should not be defined via a macro, -since the xtal clock can also be 40 MHz. This is outside of the scope of -this fix, though.) - -Signed-off-by: Pali Rohár -Change-Id: Iaa401173df87aec94f2dd1b38a90fb6ed0bf0ec6 ---- - drivers/marvell/uart/a3700_console.S | 3 ++- - plat/marvell/armada/a3k/common/include/platform_def.h | 2 +- - 2 files changed, 3 insertions(+), 2 deletions(-) - ---- a/drivers/marvell/uart/a3700_console.S -+++ b/drivers/marvell/uart/a3700_console.S -@@ -45,8 +45,9 @@ func console_a3700_core_init - cbz w2, init_fail - - /* Program the baudrate */ -- /* Divisor = Uart clock / (16 * baudrate) */ -+ /* Divisor = Round(Uartclock / (16 * baudrate)) */ - lsl w2, w2, #4 -+ add w1, w1, w2, lsr #1 - udiv w2, w1, w2 - and w2, w2, #0x3ff - ---- a/plat/marvell/armada/a3k/common/include/platform_def.h -+++ b/plat/marvell/armada/a3k/common/include/platform_def.h -@@ -164,7 +164,7 @@ - * PL011 related constants - */ - #define PLAT_MARVELL_BOOT_UART_BASE (MVEBU_REGS_BASE + 0x12000) --#define PLAT_MARVELL_BOOT_UART_CLK_IN_HZ 25804800 -+#define PLAT_MARVELL_BOOT_UART_CLK_IN_HZ 25000000 - - #define PLAT_MARVELL_CRASH_UART_BASE PLAT_MARVELL_BOOT_UART_BASE - #define PLAT_MARVELL_CRASH_UART_CLK_IN_HZ PLAT_MARVELL_BOOT_UART_CLK_IN_HZ diff --git a/package/boot/arm-trusted-firmware-mvebu/patches/101-fix-plat-marvell-a3720-uart-fix-configuring-UART-clo.patch b/package/boot/arm-trusted-firmware-mvebu/patches/101-fix-plat-marvell-a3720-uart-fix-configuring-UART-clo.patch deleted file mode 100644 index dee4c63d3c..0000000000 --- a/package/boot/arm-trusted-firmware-mvebu/patches/101-fix-plat-marvell-a3720-uart-fix-configuring-UART-clo.patch +++ /dev/null @@ -1,53 +0,0 @@ -From b9185c75f7ec2b600ebe0d49281e216a2456b764 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Pali=20Roh=C3=A1r?= -Date: Thu, 13 May 2021 15:11:06 +0200 -Subject: [PATCH] fix(plat/marvell/a3720/uart): fix configuring UART clock -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -When configuring the UART_BAUD_REG register, the function -console_a3700_core_init() currently only changes the baud divisor field, -leaving other fields to their previous value. - -This is incorrect, because the baud divisor is computed with the -assumption that the parent clock rate is 25 MHz, and since the other -fields in this register configure the parent clock, which could have -been changed by U-Boot or Linux. - -Fix this function to also configure the other fields so that the UART -parent clock is selected to be the xtal clock. - -For example without this change TF-A prints only - - ERROR: a3700_system_off needs to be implemented - -followed by garbage after plat_crash_console_init() is called. - -After applying this change instead of garbage it also print crash info: - - PANIC at PC : 0x0000000004023800 - -Signed-off-by: Pali Rohár -Change-Id: I72f338355cc60d939b8bb978d9c7fdd576416b81 ---- - drivers/marvell/uart/a3700_console.S | 7 ++----- - 1 file changed, 2 insertions(+), 5 deletions(-) - ---- a/drivers/marvell/uart/a3700_console.S -+++ b/drivers/marvell/uart/a3700_console.S -@@ -49,12 +49,9 @@ func console_a3700_core_init - lsl w2, w2, #4 - add w1, w1, w2, lsr #1 - udiv w2, w1, w2 -- and w2, w2, #0x3ff -+ and w2, w2, #0x3ff /* clear all other bits to use default clock */ - -- ldr w3, [x0, #UART_BAUD_REG] -- bic w3, w3, 0x3ff -- orr w3, w3, w2 -- str w3, [x0, #UART_BAUD_REG]/* set baud rate divisor */ -+ str w2, [x0, #UART_BAUD_REG]/* set baud rate divisor */ - - /* Set UART to default 16X scheme */ - mov w3, #0 diff --git a/package/boot/arm-trusted-firmware-mvebu/patches/102-refactor-plat-marvell-uart-de-duplicate-PLAT_MARVELL.patch b/package/boot/arm-trusted-firmware-mvebu/patches/102-refactor-plat-marvell-uart-de-duplicate-PLAT_MARVELL.patch deleted file mode 100644 index 7a1f19a002..0000000000 --- a/package/boot/arm-trusted-firmware-mvebu/patches/102-refactor-plat-marvell-uart-de-duplicate-PLAT_MARVELL.patch +++ /dev/null @@ -1,122 +0,0 @@ -From 3133625859b74df42deddd80b705578af6fc2fea Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Pali=20Roh=C3=A1r?= -Date: Fri, 14 May 2021 13:21:56 +0200 -Subject: [PATCH] refactor(plat/marvell/uart): de-duplicate PLAT_MARVELL_UART - macros -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Macros PLAT_MARVELL_BOOT_UART* and PLAT_MARVELL_CRASH_UART* are defined -to same values. De-duplicate them into PLAT_MARVELL_UART* macros. - -Signed-off-by: Pali Rohár -Change-Id: Iae5daf7cad6a971e6f3dbe561df3d0174106ca7f ---- - plat/marvell/armada/a3k/common/include/platform_def.h | 7 ++----- - plat/marvell/armada/a8k/a80x0_puzzle/board/system_power.c | 4 ++-- - plat/marvell/armada/a8k/common/include/platform_def.h | 7 ++----- - plat/marvell/armada/common/aarch64/marvell_helpers.S | 8 ++++---- - plat/marvell/armada/common/marvell_console.c | 8 ++++---- - 5 files changed, 14 insertions(+), 20 deletions(-) - ---- a/plat/marvell/armada/a3k/common/include/platform_def.h -+++ b/plat/marvell/armada/a3k/common/include/platform_def.h -@@ -163,11 +163,8 @@ - /* - * PL011 related constants - */ --#define PLAT_MARVELL_BOOT_UART_BASE (MVEBU_REGS_BASE + 0x12000) --#define PLAT_MARVELL_BOOT_UART_CLK_IN_HZ 25000000 -- --#define PLAT_MARVELL_CRASH_UART_BASE PLAT_MARVELL_BOOT_UART_BASE --#define PLAT_MARVELL_CRASH_UART_CLK_IN_HZ PLAT_MARVELL_BOOT_UART_CLK_IN_HZ -+#define PLAT_MARVELL_UART_BASE (MVEBU_REGS_BASE + 0x12000) -+#define PLAT_MARVELL_UART_CLK_IN_HZ 25000000 - - #define PLAT_MARVELL_BL31_RUN_UART_BASE PLAT_MARVELL_BOOT_UART_BASE - #define PLAT_MARVELL_BL31_RUN_UART_CLK_IN_HZ PLAT_MARVELL_BOOT_UART_CLK_IN_HZ ---- a/plat/marvell/armada/a8k/a80x0_puzzle/board/system_power.c -+++ b/plat/marvell/armada/a8k/a80x0_puzzle/board/system_power.c -@@ -41,8 +41,8 @@ int system_power_off(void) - len = sizeof(system_off_now); - system_off_now[len - 1] = add_xor_checksum(system_off_now, len); - -- console_16550_register(PLAT_MARVELL_BOOT_UART_BASE + 0x100, -- PLAT_MARVELL_BOOT_UART_CLK_IN_HZ, 115200, &console); -+ console_16550_register(PLAT_MARVELL_UART_BASE + 0x100, -+ PLAT_MARVELL_UART_CLK_IN_HZ, 115200, &console); - - /* Send system_off_now to console */ - for (i = 0; i < len; i++) { ---- a/plat/marvell/armada/a8k/common/include/platform_def.h -+++ b/plat/marvell/armada/a8k/common/include/platform_def.h -@@ -168,11 +168,8 @@ - /* - * PL011 related constants - */ --#define PLAT_MARVELL_BOOT_UART_BASE (MVEBU_REGS_BASE + 0x512000) --#define PLAT_MARVELL_BOOT_UART_CLK_IN_HZ 200000000 -- --#define PLAT_MARVELL_CRASH_UART_BASE PLAT_MARVELL_BOOT_UART_BASE --#define PLAT_MARVELL_CRASH_UART_CLK_IN_HZ PLAT_MARVELL_BOOT_UART_CLK_IN_HZ -+#define PLAT_MARVELL_UART_BASE (MVEBU_REGS_BASE + 0x512000) -+#define PLAT_MARVELL_UART_CLK_IN_HZ 200000000 - - #define PLAT_MARVELL_BL31_RUN_UART_BASE PLAT_MARVELL_BOOT_UART_BASE - #define PLAT_MARVELL_BL31_RUN_UART_CLK_IN_HZ PLAT_MARVELL_BOOT_UART_CLK_IN_HZ ---- a/plat/marvell/armada/common/aarch64/marvell_helpers.S -+++ b/plat/marvell/armada/common/aarch64/marvell_helpers.S -@@ -63,8 +63,8 @@ endfunc plat_marvell_calc_core_pos - * --------------------------------------------- - */ - func plat_crash_console_init -- mov_imm x0, PLAT_MARVELL_CRASH_UART_BASE -- mov_imm x1, PLAT_MARVELL_CRASH_UART_CLK_IN_HZ -+ mov_imm x0, PLAT_MARVELL_UART_BASE -+ mov_imm x1, PLAT_MARVELL_UART_CLK_IN_HZ - mov_imm x2, MARVELL_CONSOLE_BAUDRATE - #ifdef PLAT_a3700 - b console_a3700_core_init -@@ -81,7 +81,7 @@ endfunc plat_crash_console_init - * --------------------------------------------- - */ - func plat_crash_console_putc -- mov_imm x1, PLAT_MARVELL_CRASH_UART_BASE -+ mov_imm x1, PLAT_MARVELL_UART_BASE - #ifdef PLAT_a3700 - - b console_a3700_core_putc -@@ -99,7 +99,7 @@ endfunc plat_crash_console_putc - * --------------------------------------------- - */ - func plat_crash_console_flush -- mov_imm x0, PLAT_MARVELL_CRASH_UART_BASE -+ mov_imm x0, PLAT_MARVELL_UART_BASE - #ifdef PLAT_a3700 - b console_a3700_core_flush - #else ---- a/plat/marvell/armada/common/marvell_console.c -+++ b/plat/marvell/armada/common/marvell_console.c -@@ -31,8 +31,8 @@ static console_t marvell_runtime_console - void marvell_console_boot_init(void) - { - int rc = -- console_marvell_register(PLAT_MARVELL_BOOT_UART_BASE, -- PLAT_MARVELL_BOOT_UART_CLK_IN_HZ, -+ console_marvell_register(PLAT_MARVELL_UART_BASE, -+ PLAT_MARVELL_UART_CLK_IN_HZ, - MARVELL_CONSOLE_BAUDRATE, - &marvell_boot_console); - if (rc == 0) { -@@ -58,8 +58,8 @@ void marvell_console_boot_end(void) - void marvell_console_runtime_init(void) - { - int rc = -- console_marvell_register(PLAT_MARVELL_BOOT_UART_BASE, -- PLAT_MARVELL_BOOT_UART_CLK_IN_HZ, -+ console_marvell_register(PLAT_MARVELL_UART_BASE, -+ PLAT_MARVELL_UART_CLK_IN_HZ, - MARVELL_CONSOLE_BAUDRATE, - &marvell_runtime_console); - if (rc == 0) diff --git a/package/boot/arm-trusted-firmware-mvebu/patches/103-fix-plat-marvell-a3720-uart-fix-UART-parent-clock-ra.patch b/package/boot/arm-trusted-firmware-mvebu/patches/103-fix-plat-marvell-a3720-uart-fix-UART-parent-clock-ra.patch deleted file mode 100644 index ab958a097a..0000000000 --- a/package/boot/arm-trusted-firmware-mvebu/patches/103-fix-plat-marvell-a3720-uart-fix-UART-parent-clock-ra.patch +++ /dev/null @@ -1,177 +0,0 @@ -From 5a91c439cbeb1f64b8b9830de91efad5113d3c89 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Pali=20Roh=C3=A1r?= -Date: Fri, 14 May 2021 15:52:11 +0200 -Subject: [PATCH] fix(plat/marvell/a3720/uart): fix UART parent clock rate - determination -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The UART code for the A3K platform assumes that UART parent clock rate -is always 25 MHz. This is incorrect, because the xtal clock can also run -at 40 MHz (this is board specific). - -The frequency of the xtal clock is determined by a value on a strapping -pin during SOC reset. The code to determine this frequency is already in -A3K's comphy driver. - -Move the get_ref_clk() function from the comphy driver to a separate -file and use it for UART parent clock rate determination. - -Signed-off-by: Pali Rohár -Change-Id: I8bb18a2d020ef18fe65aa06ffa4ab205c71be92e ---- - drivers/marvell/comphy/phy-comphy-3700.c | 24 +------------ - .../marvell/armada/a3k/common/plat_marvell.h | 2 ++ - .../marvell/armada/a3k/common/a3700_common.mk | 1 + - .../armada/a3k/common/aarch64/a3700_clock.S | 35 +++++++++++++++++++ - .../armada/a3k/common/include/platform_def.h | 1 - - .../armada/common/aarch64/marvell_helpers.S | 10 +++++- - plat/marvell/armada/common/marvell_console.c | 1 + - 7 files changed, 49 insertions(+), 25 deletions(-) - create mode 100644 plat/marvell/armada/a3k/common/aarch64/a3700_clock.S - ---- a/drivers/marvell/comphy/phy-comphy-3700.c -+++ b/drivers/marvell/comphy/phy-comphy-3700.c -@@ -14,6 +14,7 @@ - - #include - #include -+#include - - #include "phy-comphy-3700.h" - #include "phy-comphy-common.h" -@@ -29,15 +30,6 @@ - #define USB3_GBE1_PHY (MVEBU_REGS_BASE + 0x5C000) - #define COMPHY_SD_ADDR (MVEBU_REGS_BASE + 0x1F000) - --/* -- * Below address in used only for reading, therefore no problem with concurrent -- * Linux access. -- */ --#define MVEBU_TEST_PIN_LATCH_N (MVEBU_NB_GPIO_REG_BASE + 0x8) -- #define MVEBU_XTAL_MODE_MASK BIT(9) -- #define MVEBU_XTAL_MODE_OFFS 9 -- #define MVEBU_XTAL_CLOCK_25MHZ 0x0 -- - struct sgmii_phy_init_data_fix { - uint16_t addr; - uint16_t value; -@@ -125,20 +117,6 @@ static uint16_t sgmii_phy_init[512] = { - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000 /*1F8 */ - }; - --/* returns reference clock in MHz (25 or 40) */ --static uint32_t get_ref_clk(void) --{ -- uint32_t val; -- -- val = (mmio_read_32(MVEBU_TEST_PIN_LATCH_N) & MVEBU_XTAL_MODE_MASK) >> -- MVEBU_XTAL_MODE_OFFS; -- -- if (val == MVEBU_XTAL_CLOCK_25MHZ) -- return 25; -- else -- return 40; --} -- - /* PHY selector configures with corresponding modes */ - static void mvebu_a3700_comphy_set_phy_selector(uint8_t comphy_index, - uint32_t comphy_mode) ---- a/include/plat/marvell/armada/a3k/common/plat_marvell.h -+++ b/include/plat/marvell/armada/a3k/common/plat_marvell.h -@@ -100,4 +100,6 @@ void plat_marvell_interconnect_enter_coh - - const mmap_region_t *plat_marvell_get_mmap(void); - -+uint32_t get_ref_clk(void); -+ - #endif /* PLAT_MARVELL_H */ ---- a/plat/marvell/armada/a3k/common/a3700_common.mk -+++ b/plat/marvell/armada/a3k/common/a3700_common.mk -@@ -38,6 +38,7 @@ PLAT_INCLUDES := -I$(PLAT_FAMILY_BASE)/ - -I$/drivers/arm/gic/common/ - - PLAT_BL_COMMON_SOURCES := $(PLAT_COMMON_BASE)/aarch64/a3700_common.c \ -+ $(PLAT_COMMON_BASE)/aarch64/a3700_clock.S \ - $(MARVELL_DRV_BASE)/uart/a3700_console.S - - BL1_SOURCES += $(PLAT_COMMON_BASE)/aarch64/plat_helpers.S \ ---- /dev/null -+++ b/plat/marvell/armada/a3k/common/aarch64/a3700_clock.S -@@ -0,0 +1,35 @@ -+/* -+ * Copyright (C) 2018 Marvell International Ltd. -+ * -+ * SPDX-License-Identifier: BSD-3-Clause -+ * https://spdx.org/licenses -+ */ -+ -+#include -+#include -+ -+/* -+ * Below address in used only for reading, therefore no problem with concurrent -+ * Linux access. -+ */ -+#define MVEBU_TEST_PIN_LATCH_N (MVEBU_NB_GPIO_REG_BASE + 0x8) -+ #define MVEBU_XTAL_MODE_MASK BIT(9) -+ -+ /* ----------------------------------------------------- -+ * uint32_t get_ref_clk (void); -+ * -+ * returns reference clock in MHz (25 or 40) -+ * ----------------------------------------------------- -+ */ -+.globl get_ref_clk -+func get_ref_clk -+ mov_imm x0, MVEBU_TEST_PIN_LATCH_N -+ ldr w0, [x0] -+ tst w0, #MVEBU_XTAL_MODE_MASK -+ bne 40 -+ mov w0, #25 -+ ret -+40: -+ mov w0, #40 -+ ret -+endfunc get_ref_clk ---- a/plat/marvell/armada/a3k/common/include/platform_def.h -+++ b/plat/marvell/armada/a3k/common/include/platform_def.h -@@ -164,7 +164,6 @@ - * PL011 related constants - */ - #define PLAT_MARVELL_UART_BASE (MVEBU_REGS_BASE + 0x12000) --#define PLAT_MARVELL_UART_CLK_IN_HZ 25000000 - - #define PLAT_MARVELL_BL31_RUN_UART_BASE PLAT_MARVELL_BOOT_UART_BASE - #define PLAT_MARVELL_BL31_RUN_UART_CLK_IN_HZ PLAT_MARVELL_BOOT_UART_CLK_IN_HZ ---- a/plat/marvell/armada/common/aarch64/marvell_helpers.S -+++ b/plat/marvell/armada/common/aarch64/marvell_helpers.S -@@ -63,8 +63,16 @@ endfunc plat_marvell_calc_core_pos - * --------------------------------------------- - */ - func plat_crash_console_init -- mov_imm x0, PLAT_MARVELL_UART_BASE -+#ifdef PLAT_a3700 -+ mov x1, x30 -+ bl get_ref_clk -+ mov x30, x1 -+ mov_imm x1, 1000000 -+ mul x1, x0, x1 -+#else - mov_imm x1, PLAT_MARVELL_UART_CLK_IN_HZ -+#endif -+ mov_imm x0, PLAT_MARVELL_UART_BASE - mov_imm x2, MARVELL_CONSOLE_BAUDRATE - #ifdef PLAT_a3700 - b console_a3700_core_init ---- a/plat/marvell/armada/common/marvell_console.c -+++ b/plat/marvell/armada/common/marvell_console.c -@@ -14,6 +14,7 @@ - - #ifdef PLAT_a3700 - #include -+#define PLAT_MARVELL_UART_CLK_IN_HZ (get_ref_clk() * 1000000) - #define console_marvell_register console_a3700_register - #else - #include diff --git a/package/boot/arm-trusted-firmware-mvebu/patches/200-hostssl.patch b/package/boot/arm-trusted-firmware-mvebu/patches/200-hostssl.patch deleted file mode 100644 index ad4e1e9f71..0000000000 --- a/package/boot/arm-trusted-firmware-mvebu/patches/200-hostssl.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/tools/fiptool/Makefile -+++ b/tools/fiptool/Makefile -@@ -20,7 +20,7 @@ ifeq (${DEBUG},1) - else - HOSTCCFLAGS += -O2 - endif --LDLIBS := -lcrypto -+LDLIBS := -L${OPENSSL_DIR}/lib -lcrypto - - ifeq (${V},0) - Q := @ -@@ -28,7 +28,7 @@ else - Q := - endif - --INCLUDE_PATHS := -I../../include/tools_share -+INCLUDE_PATHS := -I../../include/tools_share -I${OPENSSL_DIR}/include - - HOSTCC ?= gcc -