From: Chris Packham Date: Mon, 18 Feb 2019 02:46:45 +0000 (+1300) Subject: ARM: mvebu: kirkwood: remove error message when retrieving mac address X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=7971cc408d11e9fb6dd2823f81d3a23465700dd0;p=openwrt%2Fstaging%2Fblogic.git ARM: mvebu: kirkwood: remove error message when retrieving mac address Kirkwood has always had the ability to retrieve the local-mac-address from the hardware (usually this was configured by the bootloader). This is particularly useful when dealing with a legacy non-DT aware bootloader. The "error" message just indicated that the board used an old bootloader and in many cases users can't do anything about this. The message probably should have been pr_info() to inform the user that the kernel has been helpful but rather than than let's remove it entirely to make the kernel less noisy. Signed-off-by: Chris Packham Signed-off-by: Gregory CLEMENT --- diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c index 0aa88105d46e..bf3ff0f580c2 100644 --- a/arch/arm/mach-mvebu/kirkwood.c +++ b/arch/arm/mach-mvebu/kirkwood.c @@ -107,8 +107,6 @@ static void __init kirkwood_dt_eth_fixup(void) clk_prepare_enable(clk); /* store MAC address register contents in local-mac-address */ - pr_err(FW_INFO "%pOF: local-mac-address is not set\n", np); - pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL); if (!pmac) goto eth_fixup_no_mem;