From: Maarten ter Huurne Date: Sun, 28 Feb 2016 15:53:28 +0000 (+0100) Subject: regulator: act8865: Specify fixed voltage of 3.3V for ACT8600's REG9 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=79b5d0266aa4324c9148ad96894fcc7ad8c03c62;p=openwrt%2Fstaging%2Fblogic.git regulator: act8865: Specify fixed voltage of 3.3V for ACT8600's REG9 The documentation lists both 1.8V and 3.3V for this regulator output, but 3.3V is mentioned more often and also matches what JZ4770 and JZ4780 expect as an input. Note that the voltage of REG9 is not programmable, so this commit only changes the voltage reported in sysfs and debugfs, not the actual output voltage of the hardware. Signed-off-by: Maarten ter Huurne Signed-off-by: Mark Brown --- diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c index 1994795407c5..000d566e32a4 100644 --- a/drivers/regulator/act8865-regulator.c +++ b/drivers/regulator/act8865-regulator.c @@ -218,7 +218,7 @@ static const struct regulator_desc act8600_regulators[] = { .ops = &act8865_ldo_ops, .type = REGULATOR_VOLTAGE, .n_voltages = 1, - .fixed_uV = 1800000, + .fixed_uV = 3300000, .enable_reg = ACT8600_LDO910_CTRL, .enable_mask = ACT8865_ENA, .owner = THIS_MODULE,