From: Rosen Penev Date: Sun, 18 Feb 2024 05:22:13 +0000 (-0800) Subject: ath79: convert pcs,cap324 calibration to nvmem X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=79fc4dba6014cf653bf43099e6742028b222f6f5;p=openwrt%2Fstaging%2Fblocktrron.git ath79: convert pcs,cap324 calibration to nvmem Userspace handling is deprecated. Also fix a bug with userspace handling where the wrong calibration data was being used for the PCI card. The dts was correct but userspace was not. Signed-off-by: Rosen Penev --- diff --git a/target/linux/ath79/dts/ar9344_pcs_cap324.dts b/target/linux/ath79/dts/ar9344_pcs_cap324.dts index f7f3ef06c9..e03d0593ba 100644 --- a/target/linux/ath79/dts/ar9344_pcs_cap324.dts +++ b/target/linux/ath79/dts/ar9344_pcs_cap324.dts @@ -110,7 +110,7 @@ reg = <0x050000 0x0fa0000>; }; - art: partition@7f0000 { + partition@7f0000 { label = "art"; reg = <0xff0000 0x010000>; read-only; @@ -125,6 +125,14 @@ reg = <0x0 0x6>; #nvmem-cell-cells = <1>; }; + + cal_art_1000: calibration@1000 { + reg = <0x1000 0x440>; + }; + + cal_art_5000: calibration@5000 { + reg = <0x5000 0x440>; + }; }; }; }; @@ -137,10 +145,8 @@ ath9k: wifi@0,0 { compatible = "168c,0030"; reg = <0x0000 0 0 0 0>; - nvmem-cells = <&macaddr_art_0 (-2)>; - nvmem-cell-names = "mac-address"; - mtd-cal-data = <&art 0x5000>; - qca,no-eeprom; + nvmem-cells = <&macaddr_art_0 (-2)>, <&cal_art_5000>; + nvmem-cell-names = "mac-address", "calibration"; ieee80211-freq-limit = <2402000 2482000>; #gpio-cells = <2>; gpio-controller; @@ -151,9 +157,8 @@ status = "okay"; ieee80211-freq-limit = <4900000 5990000>; - mtd-cal-data = <&art 0x1000>; - nvmem-cells = <&macaddr_art_0 (-1)>; - nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_art_0 (-1)>, <&cal_art_1000>; + nvmem-cell-names = "mac-address", "calibration"; }; &mdio0 { diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 1caba6aa7c..b1e4cd0038 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -93,8 +93,7 @@ case "$FIRMWARE" in avm,fritz300e) caldata_extract_reverse "urloader" 0x1541 0x440 ;; - buffalo,wzr-hp-g450h|\ - pcs,cap324) + buffalo,wzr-hp-g450h) caldata_extract "art" 0x1000 0x440 ;; dlink,dir-825-c1|\