From: Steven Walter Date: Mon, 31 May 2010 17:11:53 +0000 (+0000) Subject: tulip: explicity set to D0 power state during init X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=7a1d7f01b5e90f85d0b4ec4bfd5a5da769d2bb1d;p=openwrt%2Fstaging%2Fblogic.git tulip: explicity set to D0 power state during init During the first suspend the chip would refuse to enter D3. Subsequent suspends worked okay. During resume the chip is commanded into D0. Doing so during initialization fixes the initial suspend. Signed-off-by: Steven Walter Signed-off-by: Grant Grundler Signed-off-by: David S. Miller --- diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index 254643ed945e..bd3b41daa892 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -1381,6 +1381,13 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, return i; } + /* The chip will fail to enter a low-power state later unless + * first explicitly commanded into D0 */ + if (pci_set_power_state(pdev, PCI_D0)) { + printk (KERN_NOTICE PFX + "Failed to set power state to D0\n"); + } + irq = pdev->irq; /* alloc_etherdev ensures aligned and zeroed private structures */