From: x00270170 Date: Tue, 3 Jul 2018 07:06:27 +0000 (+0800) Subject: mmc: dw_mmc: fix card threshold control configuration X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=7a6b9f4d601dfce8cb68f0dcfd834270280e31e6;p=openwrt%2Fstaging%2Fblogic.git mmc: dw_mmc: fix card threshold control configuration Card write threshold control is supposed to be set since controller version 2.80a for data write in HS400 mode and data read in HS200/HS400/SDR104 mode. However the current code returns without configuring it in the case of data writing in HS400 mode. Meanwhile the patch fixes that the current code goes to 'disable' when doing data reading in HS400 mode. Fixes: 7e4bf1bc9543 ("mmc: dw_mmc: add the card write threshold for HS400 mode") Signed-off-by: Qing Xia Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Ulf Hansson --- diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 623f4d27fa01..80dc2fd6576c 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1065,8 +1065,8 @@ static void dw_mci_ctrl_thld(struct dw_mci *host, struct mmc_data *data) * It's used when HS400 mode is enabled. */ if (data->flags & MMC_DATA_WRITE && - !(host->timing != MMC_TIMING_MMC_HS400)) - return; + host->timing != MMC_TIMING_MMC_HS400) + goto disable; if (data->flags & MMC_DATA_WRITE) enable = SDMMC_CARD_WR_THR_EN; @@ -1074,7 +1074,8 @@ static void dw_mci_ctrl_thld(struct dw_mci *host, struct mmc_data *data) enable = SDMMC_CARD_RD_THR_EN; if (host->timing != MMC_TIMING_MMC_HS200 && - host->timing != MMC_TIMING_UHS_SDR104) + host->timing != MMC_TIMING_UHS_SDR104 && + host->timing != MMC_TIMING_MMC_HS400) goto disable; blksz_depth = blksz / (1 << host->data_shift);