From: Arnd Bergmann Date: Thu, 15 Mar 2018 15:06:55 +0000 (+0100) Subject: Merge tag 'imx-dt-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawngu... X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=7a76aad0262e7eed6d7aca3b4c95e4621601d779;p=openwrt%2Fstaging%2Fblogic.git Merge tag 'imx-dt-4.17' of ssh://gitolite./linux/kernel/git/shawnguo/linux into next/dt Pull "i.MX device tree updates for 4.17" from Shawn Guo: - New board support: phyBOARD-Mira i.MX6 boards; Advantech DMS-BA16 i.MX6Q board; Toradex Colibri iMX6ULL boards. - ZII RDU board updates: add RAVE SP device; disable on-chip watchdog as the external watchdog is being used instead; improve USDHC node regarding to voltage and SDIO capability. - i.MX6UL/ULL updates: cpufreq clock cleanup; add IOMUXC_SNVS pins and missing daisy chain configurations; add more devices like WDOG3, UART8, PMU, architected timer etc. - Hummingboard updates: correct USBOTG-ID pin; remove mention of nonexistent node. - Fix compatibles of atmel eeprom devices. - A couple of improvements on i.MX25 pinfunc header regarding to eSDHC pins. - A bunch of patches from Fabio and Marco to fix DTC warnings seen with W=1 switch. - Remove GPU subsystem nodes, as they are not needed by the etnaviv driver anymore and have been removed from the binding. - Add FIFO depth definition for i.MX25 SSI devices. - Add missing '#sound-dai-cells' for sgtl5000 codec which is complained by DTC. - Miscellaneous and random updates. * tag 'imx-dt-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (66 commits) ARM: dts: i.MX25: define SSI FIFO depth ARM: dts: vf610m4: Remove the zero length reg property ARM: dts: vf610m4: Remove skeleton.dtsi inclusion ARM: dts: vf500: Remove the zero length reg property ARM: dts: vf: Add memory node unit name ARM: dts: vf500: Remove skeleton.dtsi inclusion ARM: dts: imx7s: add temperature monitor support ARM: dts: imx: Add missing #sound-dai-cells for sgtl5000 codec ARM: dts: imx51-zii-rdu1: Add node for RAVE SP device ARM: dts: imx6: RDU2: Add RAVE SP device ARM: dts: imx5: Pass the memory unit-address ARM: dts: imx7s: add spba-bus abstraction ARM: dts: imx6dl-icore-rqs: Fix invalid PHY address assignment for ethernet ARM: dts: imx6ul: add wdog3 node ARM: dts: imx7: add CPU PMU support ARM: dts: imx6dl-colibri-eval-v3: Add chosen node ARM: dts: imx6: Pass memory unit-adress ARM: dts: imx6dl: remove 'lcdif' node ARM: dts: hummingboard: Remove mention of nonexistent node ARM: dts: imx6qdl-hummingboard: fix USBOTG-ID pin ... --- 7a76aad0262e7eed6d7aca3b4c95e4621601d779 diff --cc arch/arm/boot/dts/imx7s.dtsi index 39fae570f230,cd6964f658c0..4d42335c0dee --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@@ -718,150 -734,128 +744,158 @@@ reg = <0x30800000 0x400000>; ranges; - ecspi1: ecspi@30820000 { + spba-bus@30800000 { + compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; - reg = <0x30820000 0x10000>; - interrupts = ; - clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>, - <&clks IMX7D_ECSPI1_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; + #size-cells = <1>; + reg = <0x30800000 0x100000>; + ranges; - ecspi2: ecspi@30830000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; - reg = <0x30830000 0x10000>; - interrupts = ; - clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>, - <&clks IMX7D_ECSPI2_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; + ecspi1: ecspi@30820000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; + reg = <0x30820000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>, + <&clks IMX7D_ECSPI1_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; - ecspi3: ecspi@30840000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; - reg = <0x30840000 0x10000>; - interrupts = ; - clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>, - <&clks IMX7D_ECSPI3_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; + ecspi2: ecspi@30830000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; + reg = <0x30830000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>, + <&clks IMX7D_ECSPI2_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; - uart1: serial@30860000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart"; - reg = <0x30860000 0x10000>; - interrupts = ; - clocks = <&clks IMX7D_UART1_ROOT_CLK>, - <&clks IMX7D_UART1_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; + ecspi3: ecspi@30840000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; + reg = <0x30840000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>, + <&clks IMX7D_ECSPI3_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; - uart2: serial@30890000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart"; - reg = <0x30890000 0x10000>; - interrupts = ; - clocks = <&clks IMX7D_UART2_ROOT_CLK>, - <&clks IMX7D_UART2_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; + uart1: serial@30860000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30860000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_UART1_ROOT_CLK>, + <&clks IMX7D_UART1_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; - uart3: serial@30880000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart"; - reg = <0x30880000 0x10000>; - interrupts = ; - clocks = <&clks IMX7D_UART3_ROOT_CLK>, - <&clks IMX7D_UART3_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; + uart2: serial@30890000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30890000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_UART2_ROOT_CLK>, + <&clks IMX7D_UART2_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; - sai1: sai@308a0000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai"; - reg = <0x308a0000 0x10000>; - interrupts = ; - clocks = <&clks IMX7D_SAI1_IPG_CLK>, - <&clks IMX7D_SAI1_ROOT_CLK>, - <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "rx", "tx"; - dmas = <&sdma 8 24 0>, <&sdma 9 24 0>; - status = "disabled"; - }; + uart3: serial@30880000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30880000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_UART3_ROOT_CLK>, + <&clks IMX7D_UART3_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; - sai2: sai@308b0000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai"; - reg = <0x308b0000 0x10000>; - interrupts = ; - clocks = <&clks IMX7D_SAI2_IPG_CLK>, - <&clks IMX7D_SAI2_ROOT_CLK>, - <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "rx", "tx"; - dmas = <&sdma 10 24 0>, <&sdma 11 24 0>; - status = "disabled"; - }; + sai1: sai@308a0000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai"; + reg = <0x308a0000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_SAI1_IPG_CLK>, + <&clks IMX7D_SAI1_ROOT_CLK>, + <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&sdma 8 24 0>, <&sdma 9 24 0>; + status = "disabled"; + }; - sai3: sai@308c0000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai"; - reg = <0x308c0000 0x10000>; - interrupts = ; - clocks = <&clks IMX7D_SAI3_IPG_CLK>, - <&clks IMX7D_SAI3_ROOT_CLK>, - <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "rx", "tx"; - dmas = <&sdma 12 24 0>, <&sdma 13 24 0>; - status = "disabled"; + sai2: sai@308b0000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai"; + reg = <0x308b0000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_SAI2_IPG_CLK>, + <&clks IMX7D_SAI2_ROOT_CLK>, + <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&sdma 10 24 0>, <&sdma 11 24 0>; + status = "disabled"; + }; + + sai3: sai@308c0000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai"; + reg = <0x308c0000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_SAI3_IPG_CLK>, + <&clks IMX7D_SAI3_ROOT_CLK>, + <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&sdma 12 24 0>, <&sdma 13 24 0>; + status = "disabled"; + }; }; + crypto: caam@30900000 { + compatible = "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30900000 0x40000>; + ranges = <0 0x30900000 0x40000>; + interrupts = ; + clocks = <&clks IMX7D_CAAM_CLK>, + <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>; + clock-names = "ipg", "aclk"; + + sec_jr0: jr0@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = ; + }; + + sec_jr1: jr1@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = ; + }; + + sec_jr2: jr1@3000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = ; + }; + }; + flexcan1: can@30a00000 { compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan"; reg = <0x30a00000 0x10000>; diff --cc arch/arm/boot/dts/vf610m4-colibri.dts index 5532e40e350a,2b237ef887b8..41ec66a96990 --- a/arch/arm/boot/dts/vf610m4-colibri.dts +++ b/arch/arm/boot/dts/vf610m4-colibri.dts @@@ -51,10 -51,10 +51,10 @@@ chosen { bootargs = "console=ttyLP2,115200 clk_ignore_unused init=/linuxrc rw"; - linux,stdout-path = "&uart2"; + stdout-path = "&uart2"; }; - memory { + memory@8c000000 { reg = <0x8c000000 0x3000000>; }; };