From: Mirko Parthey Date: Tue, 22 May 2018 19:23:36 +0000 (+0200) Subject: brcm47xx: add switch port mapping to Asus WL-500W X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=7ac238fc9855d20f0cfbc5754a1f9591438abfe3;p=openwrt%2Fstaging%2Faparcar.git brcm47xx: add switch port mapping to Asus WL-500W Switch ports 0..3 are connected to external ports LAN{1..4} in sequence, switch port 4 is not used, and switch port 5 is connected to the CPU. The WAN port is attached to the CPU's second network interface; it has no connection to the internal switch. Reuse the "Dell TrueMobile 2300" entry, which describes the same mapping. Signed-off-by: Mirko Parthey --- diff --git a/target/linux/brcm47xx/base-files/etc/board.d/01_detect b/target/linux/brcm47xx/base-files/etc/board.d/01_detect index 18604072f3..237314544b 100755 --- a/target/linux/brcm47xx/base-files/etc/board.d/01_detect +++ b/target/linux/brcm47xx/base-files/etc/board.d/01_detect @@ -139,7 +139,6 @@ detect_by_model() { ;; "Asus WL500G" | \ - "Asus WL500W" | \ "Microsoft MN-700") ucidef_set_interfaces_lan_wan "eth0" "eth1" ;; @@ -159,6 +158,7 @@ detect_by_model() { "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0" ;; + "Asus WL500W" | \ "Dell TrueMobile 2300") ucidef_set_interface_wan "eth1" ucidef_add_switch "switch0" \