From: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Date: Wed, 12 Jun 2019 17:23:46 +0000 (-0500)
Subject: ASoC: SOF: Intel: hda: make sure DMA is start/stop by read the RUN bit
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=7bcaf0f2cdfacca2226eee8895f64bc019d5a8be;p=openwrt%2Fstaging%2Fblogic.git

ASoC: SOF: Intel: hda: make sure DMA is start/stop by read the RUN bit

As per the HW recommendation, after setting the RUN bit
(start as 1, stop as 0), software must read the bit back
to make sure the bit is set right, before modifying related
control registers/re-starting the DMA engine.

Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---

diff --git a/sound/soc/sof/intel/hda-stream.c b/sound/soc/sof/intel/hda-stream.c
index 23cff5aca007..13d114993f96 100644
--- a/sound/soc/sof/intel/hda-stream.c
+++ b/sound/soc/sof/intel/hda-stream.c
@@ -217,6 +217,9 @@ int hda_dsp_stream_trigger(struct snd_sof_dev *sdev,
 {
 	struct hdac_stream *hstream = &stream->hstream;
 	int sd_offset = SOF_STREAM_SD_OFFSET(hstream);
+	u32 dma_start = SOF_HDA_SD_CTL_DMA_START;
+	int ret;
+	u32 run;
 
 	/* cmd must be for audio stream */
 	switch (cmd) {
@@ -234,6 +237,16 @@ int hda_dsp_stream_trigger(struct snd_sof_dev *sdev,
 					SOF_HDA_SD_CTL_DMA_START |
 					SOF_HDA_CL_DMA_SD_INT_MASK);
 
+		ret = snd_sof_dsp_read_poll_timeout(sdev,
+					HDA_DSP_HDA_BAR,
+					sd_offset, run,
+					((run &	dma_start) == dma_start),
+					HDA_DSP_REG_POLL_INTERVAL_US,
+					HDA_DSP_STREAM_RUN_TIMEOUT);
+
+		if (ret)
+			return ret;
+
 		hstream->running = true;
 		break;
 	case SNDRV_PCM_TRIGGER_SUSPEND:
@@ -244,6 +257,15 @@ int hda_dsp_stream_trigger(struct snd_sof_dev *sdev,
 					SOF_HDA_SD_CTL_DMA_START |
 					SOF_HDA_CL_DMA_SD_INT_MASK, 0x0);
 
+		ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_HDA_BAR,
+						sd_offset, run,
+						!(run &	dma_start),
+						HDA_DSP_REG_POLL_INTERVAL_US,
+						HDA_DSP_STREAM_RUN_TIMEOUT);
+
+		if (ret)
+			return ret;
+
 		snd_sof_dsp_write(sdev, HDA_DSP_HDA_BAR, sd_offset +
 				  SOF_HDA_ADSP_REG_CL_SD_STS,
 				  SOF_HDA_CL_DMA_SD_INT_MASK);
diff --git a/sound/soc/sof/intel/hda.h b/sound/soc/sof/intel/hda.h
index 50653859e0a0..73d7cc08afc2 100644
--- a/sound/soc/sof/intel/hda.h
+++ b/sound/soc/sof/intel/hda.h
@@ -159,6 +159,12 @@
 #define HDA_DSP_MBOX_UPLINK_OFFSET		0x81000
 
 #define HDA_DSP_STREAM_RESET_TIMEOUT		300
+/*
+ * Timeout in us, for setting the stream RUN bit, during
+ * start/stop the stream. The timeout expires if new RUN bit
+ * value cannot be read back within the specified time.
+ */
+#define HDA_DSP_STREAM_RUN_TIMEOUT		300
 #define HDA_DSP_CL_TRIGGER_TIMEOUT		300
 
 #define HDA_DSP_SPIB_ENABLE			1