From: Alexandru Gagniuc Date: Thu, 24 Apr 2025 00:27:24 +0000 (-0500) Subject: qualcommax: ipq60xx: split eap610-outdoor devicetree X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=7be36c20f18261b244d8952021f8d4f7f0010312;p=openwrt%2Fstaging%2Flinusw.git qualcommax: ipq60xx: split eap610-outdoor devicetree I have an EAP625-Outdoor HD v1 that is very similar with the EAP610 Outdoor. It works with the EAP610 initramfs, without any obvious loss of functionality. In order to prepare for supporting the EAP625, move the common parts into a shared .dtsi. Signed-off-by: Alexandru Gagniuc Link: https://github.com/openwrt/openwrt/pull/18584 Signed-off-by: Robert Marko --- diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-eap610-outdoor.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-eap610-outdoor.dts index 165fc3ef1b..33444f31e2 100644 --- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-eap610-outdoor.dts +++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-eap610-outdoor.dts @@ -2,150 +2,14 @@ /dts-v1/; -#include "ipq6018.dtsi" -#include "ipq6018-cp-cpu.dtsi" -#include "ipq6018-ess.dtsi" - -#include -#include -#include +#include "ipq6018-tplink-eap6xx-outdoor.dtsi" / { model = "TP-Link EAP610-Outdoor"; compatible = "tplink,eap610-outdoor", "qcom,ipq6018"; - - aliases { - serial0 = &blsp1_uart3; - led-boot = &led_sys_green; - led-failsafe = &led_sys_amber; - led-running = &led_sys_green; - led-upgrade = &led_sys_amber; - }; - - chosen { - stdout-path = "serial0:115200n8"; - bootargs-append = " ubi.block=0,rootfs root=/dev/ubiblock0_1"; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 9 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_sys_amber: led-0 { - function = "system"; - color = ; - gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>; - }; - - led_sys_green: led-1 { - function = "system"; - color = ; - gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio-restart { - compatible = "gpio-restart"; - gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; - open-source; - }; -}; - -&blsp1_uart3 { - pinctrl-0 = <&serial_3_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&tlmm { - mdio_pins: mdio-pins { - mdc { - pins = "gpio64"; - function = "mdc"; - drive-strength = <8>; - bias-pull-up; - }; - - mdio { - pins = "gpio65"; - function = "mdio"; - drive-strength = <8>; - bias-pull-up; - }; - }; - - led_enable { - gpio-hog; - output-high; - gpios = <36 GPIO_ACTIVE_HIGH>; - line-name = "enable-leds"; - }; -}; - -&dp5 { - phy-handle = <&rtl8211f_4>; - phy-mode = "sgmii"; - label = "lan"; - status = "okay"; -}; - -&edma { - status = "okay"; -}; - -&mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; - reset-delay-us = <10000>; - reset-post-delay-us = <50000>; - status = "okay"; - - rtl8211f_4: ethernet-phy@4 { - reg = <4>; - }; -}; - -&switch { - switch_lan_bmp = ; - switch_mac_mode1 = ; - status = "okay"; - - qcom,port_phyinfo { - port@4 { - port_id = <5>; - phy_address = <4>; - }; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&qpic_nand { - status = "okay"; - - nand@0 { - reg = <0>; - - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - nand-bus-width = <8>; - }; }; &wifi { ieee80211-freq-limit = <2402000 5835000>; qcom,ath11k-calibration-variant = "TP-Link-EAP610-Outdoor"; - status = "okay"; }; diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-tplink-eap6xx-outdoor.dtsi b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-tplink-eap6xx-outdoor.dtsi new file mode 100644 index 0000000000..486ea7ad25 --- /dev/null +++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-tplink-eap6xx-outdoor.dtsi @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#include "ipq6018.dtsi" +#include "ipq6018-cp-cpu.dtsi" +#include "ipq6018-ess.dtsi" + +#include +#include +#include + +/ { + aliases { + serial0 = &blsp1_uart3; + led-boot = &led_sys_green; + led-failsafe = &led_sys_amber; + led-running = &led_sys_green; + led-upgrade = &led_sys_amber; + }; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs-append = " ubi.block=0,rootfs root=/dev/ubiblock0_1"; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 9 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_sys_amber: led-0 { + function = "system"; + color = ; + gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>; + }; + + led_sys_green: led-1 { + function = "system"; + color = ; + gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; + open-source; + }; +}; + +&blsp1_uart3 { + pinctrl-0 = <&serial_3_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tlmm { + mdio_pins: mdio-pins { + mdc { + pins = "gpio64"; + function = "mdc"; + drive-strength = <8>; + bias-pull-up; + }; + + mdio { + pins = "gpio65"; + function = "mdio"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + led_enable { + gpio-hog; + output-high; + gpios = <36 GPIO_ACTIVE_HIGH>; + line-name = "enable-leds"; + }; +}; + +&dp5 { + phy-handle = <&rtl8211f_4>; + phy-mode = "sgmii"; + label = "lan"; + status = "okay"; +}; + +&edma { + status = "okay"; +}; + +&mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + reset-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; + reset-delay-us = <10000>; + reset-post-delay-us = <50000>; + status = "okay"; + + rtl8211f_4: ethernet-phy@4 { + reg = <4>; + }; +}; + +&switch { + switch_lan_bmp = ; + switch_mac_mode1 = ; + status = "okay"; + + qcom,port_phyinfo { + port@4 { + port_id = <5>; + phy_address = <4>; + }; + }; +}; + +&qpic_bam { + status = "okay"; +}; + +&qpic_nand { + status = "okay"; + + nand@0 { + reg = <0>; + + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + }; +}; + +&wifi { + status = "okay"; +};