From: Michal Simek <michal.simek@xilinx.com>
Date: Wed, 17 Jan 2018 14:21:38 +0000 (+0100)
Subject: arm: zynq: Add missing address node name in microzed board
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=7d3439f9cb8c8d31322f727d10e0d32d576b0c86;p=openwrt%2Fstaging%2Fblogic.git

arm: zynq: Add missing address node name in microzed board

This patch is fixing issue reported by dtc:
arch/arm/boot/dts/zynq-microzed.dtb: Warning (unit_address_vs_reg): Node
/memory has a reg or ranges property, but no unit name

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
index e017cb67ffba..aa4a0b6defb8 100644
--- a/arch/arm/boot/dts/zynq-microzed.dts
+++ b/arch/arm/boot/dts/zynq-microzed.dts
@@ -15,7 +15,7 @@
 		serial0 = &uart1;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x40000000>;
 	};