From: John Crispin <john@phrozen.org>
Date: Wed, 22 Mar 2017 08:29:11 +0000 (+0100)
Subject: ipq806x: enable QCE hardware crypto inside the kernel
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=7dc561717318c09ec96e25fcbb016a60d03865b7;p=openwrt%2Fstaging%2Fblogic.git

ipq806x: enable QCE hardware crypto inside the kernel

Signed-off-by: John Crispin <john@phrozen.org>
---

diff --git a/target/linux/ipq806x/config-4.9 b/target/linux/ipq806x/config-4.9
index 3897284b4f18..072ab6a89778 100644
--- a/target/linux/ipq806x/config-4.9
+++ b/target/linux/ipq806x/config-4.9
@@ -61,7 +61,6 @@ CONFIG_ARM_THUMB=y
 CONFIG_ARM_UNWIND=y
 CONFIG_ARM_VIRT_EXT=y
 CONFIG_AT803X_PHY=y
-# CONFIG_B53 is not set
 # CONFIG_BINFMT_FLAT is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_MQ_PCI=y
@@ -116,14 +115,33 @@ CONFIG_CRC16=y
 CONFIG_CRC32_SLICEBY8=y
 CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
 CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_DEV_QCE=y
+CONFIG_CRYPTO_DRBG=y
+CONFIG_CRYPTO_DRBG_HMAC=y
+CONFIG_CRYPTO_DRBG_MENU=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_JITTERENTROPY=y
 CONFIG_CRYPTO_LZO=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_NULL2=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_RNG_DEFAULT=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_XTS=y
 CONFIG_DCACHE_WORD_ACCESS=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_DEBUG_LL=y
@@ -297,7 +315,6 @@ CONFIG_MTD_NAND_QCOM=y
 CONFIG_MTD_QCOM_SMEM_PARTS=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_FIRMWARE_NAME="firmware"
 CONFIG_MTD_SPLIT_FIT_FW=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_BEB_LIMIT=20