From: Mathias Kresin <dev@kresin.me>
Date: Tue, 9 Aug 2016 06:11:45 +0000 (+0200)
Subject: kernel: adm6996: set carrier status
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=7f2258007893ec02e6c520242bcfb7381787014a;p=openwrt%2Fstaging%2Fblocktrron.git

kernel: adm6996: set carrier status

Due to the missing carrier status set, the interface wasn't usable on a
BTHOMEHUB2B after ip link down and up as it is done in preinit.

Signed-off-by: Mathias Kresin <dev@kresin.me>
---

diff --git a/target/linux/generic/files/drivers/net/phy/adm6996.c b/target/linux/generic/files/drivers/net/phy/adm6996.c
index a2ff2b00a5..2fe2ee71bc 100644
--- a/target/linux/generic/files/drivers/net/phy/adm6996.c
+++ b/target/linux/generic/files/drivers/net/phy/adm6996.c
@@ -1052,6 +1052,11 @@ static int adm6996_read_status(struct phy_device *phydev)
 	phydev->speed = SPEED_100;
 	phydev->duplex = DUPLEX_FULL;
 	phydev->link = 1;
+
+	phydev->state = PHY_RUNNING;
+	netif_carrier_on(phydev->attached_dev);
+	phydev->adjust_link(phydev->attached_dev);
+
 	return 0;
 }