From: Robert Marko Date: Thu, 4 Mar 2021 11:38:31 +0000 (+0100) Subject: ipq40xx: net: phy: qca807x: fix GPIO driver X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=7f2d9ccd09a1d3034aaf9c943747fc1631da5cac;p=openwrt%2Fstaging%2Fynezz.git ipq40xx: net: phy: qca807x: fix GPIO driver While rebasing into setting bits instead of magic values, I accidentally forgot to actually set the force bit. Without it using the pins as GPIO-s did not actually work. Fixes: b5c93ed ("ipq40xx: add Qualcomm QCA807x driver") Signed-off-by: Robert Marko --- diff --git a/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c b/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c index 10d38d94a6..16d7a80455 100644 --- a/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c +++ b/target/linux/ipq40xx/files/drivers/net/phy/qca807x.c @@ -356,6 +356,7 @@ static void qca807x_gpio_set(struct gpio_chip *gc, unsigned int offset, int valu val = phy_read_mmd(priv->phy, MDIO_MMD_AN, qca807x_gpio_get_reg(offset)); val &= ~QCA807X_GPIO_FORCE_MODE_MASK; + val |= QCA807X_GPIO_FORCE_EN; val |= FIELD_PREP(QCA807X_GPIO_FORCE_MODE_MASK, value); phy_write_mmd(priv->phy, MDIO_MMD_AN, qca807x_gpio_get_reg(offset), val);