From: Philip Prindeville <philipp@redfish-solutions.com>
Date: Tue, 7 Feb 2017 03:33:36 +0000 (-0700)
Subject: build: allow specifying flow-control to grub on serial console
X-Git-Tag: v19.07.0-rc1~6742
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=7fe5963be023fd59a11652ecfb065d3405a91c48;p=openwrt%2Fstaging%2Fhauke.git

build: allow specifying flow-control to grub on serial console

On the more sophisticated (i.e. deeper FIFO) serial controllers,
flow-control might be needed to avoid dropping output.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
---

diff --git a/config/Config-images.in b/config/Config-images.in
index f59a33613d..95752f737a 100644
--- a/config/Config-images.in
+++ b/config/Config-images.in
@@ -203,6 +203,11 @@ menu "Target Images"
 		default 38400 if TARGET_x86_generic
 		default 115200
 
+	config GRUB_FLOWCONTROL
+		bool "Use RTE/CTS on serial console"
+		depends on GRUB_SERIAL != ""
+		default n
+
 	config GRUB_BOOTOPTS
 		string "Extra kernel boot options"
 		depends on GRUB_IMAGES
diff --git a/target/linux/x86/image/Makefile b/target/linux/x86/image/Makefile
index f34788d67b..ca5d0123c7 100644
--- a/target/linux/x86/image/Makefile
+++ b/target/linux/x86/image/Makefile
@@ -32,8 +32,8 @@ endif
 GRUB_SERIAL:=$(call qstrip,$(CONFIG_GRUB_SERIAL))
 
 ifneq ($(GRUB_SERIAL),)
-  GRUB_CONSOLE_CMDLINE += console=$(GRUB_SERIAL),$(CONFIG_GRUB_BAUDRATE)n8
-  GRUB_SERIAL_CONFIG := serial --unit=0 --speed=$(CONFIG_GRUB_BAUDRATE) --word=8 --parity=no --stop=1 --rtscts=off
+  GRUB_CONSOLE_CMDLINE += console=$(GRUB_SERIAL),$(CONFIG_GRUB_BAUDRATE)n8$(if $(CONFIG_GRUB_FLOWCONTROL),r,)
+  GRUB_SERIAL_CONFIG := serial --unit=0 --speed=$(CONFIG_GRUB_BAUDRATE) --word=8 --parity=no --stop=1 --rtscts=$(if $(CONFIG_GRUB_FLOWCONTROL),on,off)
   GRUB_TERMINALS += serial
 endif