From: Emil Muratov <gpm@hotplug.ru>
Date: Wed, 1 Aug 2018 21:50:00 +0000 (+0300)
Subject: zram-swap: fix number of created zram devices for multicore CPU's
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=814cae7362c3bd57e8fd9305d5d0b48ff219d4d0;p=openwrt%2Fstaging%2Fynezz.git

zram-swap: fix number of created zram devices for multicore CPU's

Use only one zram swap device of the specified $size instead of
[N x $size] devices for multicore CPUs Now zram module uses multiple
compression streams for each dev by default, so we do not need to create
several zram devs to utilize multicore CPUs.

Signed-off-by: Emil Muratov <gpm@hotplug.ru>
---

diff --git a/package/system/zram-swap/files/zram.init b/package/system/zram-swap/files/zram.init
old mode 100644
new mode 100755
index 1eba3f4d98..2db986f9a8
--- a/package/system/zram-swap/files/zram.init
+++ b/package/system/zram-swap/files/zram.init
@@ -26,11 +26,6 @@ zram_applicable()
 {
 	local zram_dev="$1"
 
-	grep -sq ^"$zram_dev " /proc/swaps && {
-		logger -s -t zram_applicable -p daemon.notice "[OK] '$zram_dev' already active"
-		return 1
-	}
-
 	[ -e "$zram_dev" ] || {
 		logger -s -t zram_applicable -p daemon.crit "[ERROR] device '$zram_dev' not found"
 		return 1
@@ -54,9 +49,8 @@ zram_applicable()
 
 zram_dev()
 {
-	local core="$1"
-
-	echo "/dev/zram${core:-0}"
+	local idx="$1"
+	echo "/dev/zram${idx:-0}"
 }
 
 zram_reset()
@@ -69,6 +63,19 @@ zram_reset()
 	echo "1" >"$proc_entry"
 }
 
+zram_getdev()
+{
+	#get unallocated zram dev
+	local zdev=$( zram_dev )
+
+	if [ "$(mount | grep $zdev)" ]; then
+		local idx=`cat /sys/class/zram-control/hot_add`
+		zdev="$( zram_dev $idx )"
+	fi
+
+	echo $zdev
+}
+
 zram_comp_algo()
 {
 	local dev="$1"
@@ -86,49 +93,26 @@ zram_comp_algo()
 	fi
 }
 
-list_cpu_idx()
-{
-	# Offset by 1 if /dev/zram0 is in use by /tmp
-	if mount | grep -q /dev/zram0; then
-		local line i=1
-		# Hot-add new ZRAM device (if necessary)
-		if [ ! -b /dev/zram1 ]; then
-			cat /sys/class/zram-control/hot_add
-		fi
-	else
-		local line i=0
-	fi
-
-	while read line; do {
-		case "$line" in
-			[Pp]rocessor*)
-				echo $i
-				i=$(( i + 1 ))
-			;;
-		esac
-	} done <"/proc/cpuinfo"
-}
-
 start()
 {
-	# http://shmilyxbq-compcache.googlecode.com/hg/README
-	# if >1 cpu_core, reinit kmodule with e.g. num_devices=4
-
 	local zram_size="$( zram_size )"
-	local zram_dev core
+	local zram_dev
 
-	for core in $( list_cpu_idx ); do {
-		zram_dev="$( zram_dev "$core" )"
-		zram_applicable "$zram_dev" || return 1
+	if [ $( grep -cs zram /proc/swaps ) -ne 0 ]; then
+		logger -s -t zram_start -p daemon.notice "[OK] zram swap is already mounted"
+		return 1
+	fi
 
-		logger -s -t zram_start -p daemon.debug "activating '$zram_dev' for swapping ($zram_size MegaBytes)"
+	zram_dev="$( zram_getdev )"
+	zram_applicable "$zram_dev" || return 1
 
-		zram_reset "$zram_dev" "enforcing defaults"
-		echo $(( zram_size * 1024 * 1024 )) >"/sys/block/$( basename "$zram_dev" )/disksize"
-		zram_comp_algo "$zram_dev"
-		mkswap "$zram_dev"
-		swapon "$zram_dev"
-	} done
+	logger -s -t zram_start -p daemon.debug "activating '$zram_dev' for swapping ($zram_size MegaBytes)"
+
+	zram_reset "$zram_dev" "enforcing defaults"
+	zram_comp_algo "$zram_dev"
+	echo $(( $zram_size * 1024 * 1024 )) >"/sys/block/$( basename "$zram_dev" )/disksize"
+	mkswap "$zram_dev"
+	swapon "$zram_dev"
 }
 
 stop()