From: Anssi Hannula Date: Mon, 17 Dec 2018 13:05:40 +0000 (+0200) Subject: net: macb: fix dropped RX frames due to a race X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=8159ecab0db9095902d4c73605fb8787f5c7d653;p=openwrt%2Fstaging%2Fblogic.git net: macb: fix dropped RX frames due to a race Bit RX_USED set to 0 in the address field allows the controller to write data to the receive buffer descriptor. The driver does not ensure the ctrl field is ready (cleared) when the controller sees the RX_USED=0 written by the driver. The ctrl field might only be cleared after the controller has already updated it according to a newly received frame, causing the frame to be discarded in gem_rx() due to unexpected ctrl field contents. A message is logged when the above scenario occurs: macb ff0b0000.ethernet eth0: not whole frame pointed by descriptor Fix the issue by ensuring that when the controller sees RX_USED=0 the ctrl field is already cleared. This issue was observed on a ZynqMP based system. Fixes: 4df95131ea80 ("net/macb: change RX path for GEM") Signed-off-by: Anssi Hannula Tested-by: Claudiu Beznea Cc: Nicolas Ferre Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index c2f03c60f84b..f531c1eae4ff 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -934,14 +934,19 @@ static void gem_rx_refill(struct macb_queue *queue) if (entry == bp->rx_ring_size - 1) paddr |= MACB_BIT(RX_WRAP); - macb_set_addr(bp, desc, paddr); desc->ctrl = 0; + /* Setting addr clears RX_USED and allows reception, + * make sure ctrl is cleared first to avoid a race. + */ + dma_wmb(); + macb_set_addr(bp, desc, paddr); /* properly align Ethernet header */ skb_reserve(skb, NET_IP_ALIGN); } else { - desc->addr &= ~MACB_BIT(RX_USED); desc->ctrl = 0; + dma_wmb(); + desc->addr &= ~MACB_BIT(RX_USED); } }