From: INAGAKI Hiroshi <musashino.open@gmail.com>
Date: Mon, 30 Mar 2020 06:19:50 +0000 (+0900)
Subject: kernel: rtl8367b: use id as a bit offset for BYPASS_LINE_RATE
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=817e1323322c9d58464330a15994e8693b48b9c5;p=openwrt%2Fstaging%2Fwigyori.git

kernel: rtl8367b: use id as a bit offset for BYPASS_LINE_RATE

In RTL8367B (RTL8367RB/RTL8367R-VB), the driver in GPL tars of the
devices with this switch directly uses the ID of external interface
as a bit offset.

We should use the same way.

ref (RTL8367B):
  - ASUS RT-N56U
  - TP-Link Archer C2 v1

ref (RTL8367):
  - TP-Link TL-WR2543ND v1

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
---

diff --git a/target/linux/generic/files/drivers/net/phy/rtl8367b.c b/target/linux/generic/files/drivers/net/phy/rtl8367b.c
index de1976f13a..1b1d5001a3 100644
--- a/target/linux/generic/files/drivers/net/phy/rtl8367b.c
+++ b/target/linux/generic/files/drivers/net/phy/rtl8367b.c
@@ -813,8 +813,7 @@ static int rtl8367b_extif_set_mode(struct rtl8366_smi *smi, int id,
 
 	case RTL8367_EXTIF_MODE_TMII_MAC:
 	case RTL8367_EXTIF_MODE_TMII_PHY:
-		REG_RMW(smi, RTL8367B_BYPASS_LINE_RATE_REG,
-			BIT((id + 1) % 2), BIT((id + 1) % 2));
+		REG_RMW(smi, RTL8367B_BYPASS_LINE_RATE_REG, BIT(id), BIT(id));
 		break;
 
 	case RTL8367_EXTIF_MODE_GMII:
@@ -827,8 +826,7 @@ static int rtl8367b_extif_set_mode(struct rtl8366_smi *smi, int id,
 	case RTL8367_EXTIF_MODE_MII_MAC:
 	case RTL8367_EXTIF_MODE_MII_PHY:
 	case RTL8367_EXTIF_MODE_DISABLED:
-		REG_RMW(smi, RTL8367B_BYPASS_LINE_RATE_REG,
-			BIT((id + 1) % 2), 0);
+		REG_RMW(smi, RTL8367B_BYPASS_LINE_RATE_REG, BIT(id), 0);
 		REG_RMW(smi, RTL8367B_EXT_RGMXF_REG(id), BIT(6), 0);
 		break;