From: Clark Rawlins Date: Thu, 27 Mar 2008 13:56:17 +0000 (-0400) Subject: USB: Allow initialization of broken keyspan serial adapters. X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=822470537d0fc1dee38a2a9c8b8c398bfbb332bb;p=openwrt%2Fstaging%2Fblogic.git USB: Allow initialization of broken keyspan serial adapters. Fixes the keyspan driver after the addition of additional checking of driver requirements introduced in usb-serial.c commit 063a2da8f01806906f7d7b1a1424b9afddebc443. The initialization of the keyspan usb_serial_driver structs were not initializing the num_interrupt_out field and the additional checking was rejecting the end point so the driver wouldn't finish initializing. This commit initializes the fields to NUM_DONT_CARE. It works for the keyspan USA-49WG and doesn't break the USA-19HS which are the two keyspan devices I have to test with. Signed-off-by: Clark Rawlins Cc: stable Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 8a0d17401529..74ce8bca3e66 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -637,6 +637,7 @@ static struct usb_serial_driver keyspan_pre_device = { .description = "Keyspan - (without firmware)", .id_table = keyspan_pre_ids, .num_interrupt_in = NUM_DONT_CARE, + .num_interrupt_out = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, .num_bulk_out = NUM_DONT_CARE, .num_ports = 1, @@ -651,6 +652,7 @@ static struct usb_serial_driver keyspan_1port_device = { .description = "Keyspan 1 port adapter", .id_table = keyspan_1port_ids, .num_interrupt_in = NUM_DONT_CARE, + .num_interrupt_out = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, .num_bulk_out = NUM_DONT_CARE, .num_ports = 1, @@ -678,6 +680,7 @@ static struct usb_serial_driver keyspan_2port_device = { .description = "Keyspan 2 port adapter", .id_table = keyspan_2port_ids, .num_interrupt_in = NUM_DONT_CARE, + .num_interrupt_out = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, .num_bulk_out = NUM_DONT_CARE, .num_ports = 2, @@ -705,6 +708,7 @@ static struct usb_serial_driver keyspan_4port_device = { .description = "Keyspan 4 port adapter", .id_table = keyspan_4port_ids, .num_interrupt_in = NUM_DONT_CARE, + .num_interrupt_out = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, .num_bulk_out = NUM_DONT_CARE, .num_ports = 4,