From: Russell King Date: Fri, 31 Mar 2017 09:37:07 +0000 (+0100) Subject: net: phy: avoid setting unsupported EEE advertisments X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=83ea067fe2eae9a67c172aede6e11b9f194b1d52;p=openwrt%2Fstaging%2Fblogic.git net: phy: avoid setting unsupported EEE advertisments We currently allow userspace to set any EEE advertisments it desires, whether or not the PHY supports them. For example: # ethtool --set-eee eth1 advertise 0xffffffff # ethtool --show-eee eth1 EEE Settings for eth1: EEE status: disabled Tx LPI: disabled Supported EEE link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full Advertised EEE link modes: 100baseT/Full 1000baseT/Full 1000baseKX/Full 10000baseT/Full 10000baseKX4/Full 10000baseKR/Full Clearly, this is not sane, we should only allow link modes that are supported to be advertised (as we do elsewhere.) Ensure that we mask the MDIO_AN_EEE_ADV value with the capabilities retrieved from the MDIO_PCS_EEE_ABLE register. Reviewed-by: Florian Fainelli Signed-off-by: Russell King Signed-off-by: David S. Miller --- diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index ba4676ee9018..7b1c93b0233a 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -1332,17 +1332,22 @@ EXPORT_SYMBOL(phy_ethtool_get_eee); */ int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data) { - int val = ethtool_adv_to_mmd_eee_adv_t(data->advertised); + int cap, adv; if (!phydev->drv) return -EIO; - /* Mask prohibited EEE modes */ - val &= ~phydev->eee_broken_modes; + /* Get Supported EEE */ + cap = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE); + if (cap < 0) + return cap; - phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, val); + adv = ethtool_adv_to_mmd_eee_adv_t(data->advertised) & cap; - return 0; + /* Mask prohibited EEE modes */ + adv &= ~phydev->eee_broken_modes; + + return phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, adv); } EXPORT_SYMBOL(phy_ethtool_set_eee);