From: H Hartley Sweeten Date: Wed, 18 Nov 2015 17:07:23 +0000 (-0700) Subject: staging: comedi: adv_pci_dio: use common defines for PCI-173[036] registers X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=86065e4d60a4a961600822654a4e6e2f232eff97;p=openwrt%2Fstaging%2Fblogic.git staging: comedi: adv_pci_dio: use common defines for PCI-173[036] registers These boards use the same offsets for the interrupt control registers. For aesthetics, remove the current defines and use common ones. Fix the switch() in pci_dio_reset() to use common code. Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/adv_pci_dio.c b/drivers/staging/comedi/drivers/adv_pci_dio.c index 8fb03e258b31..fae0a0b29c03 100644 --- a/drivers/staging/comedi/drivers/adv_pci_dio.c +++ b/drivers/staging/comedi/drivers/adv_pci_dio.c @@ -48,18 +48,14 @@ enum hw_cards_id { #define MAX_DIO_SUBDEVG 2 /* max number of DIO subdevices group per * card */ -/* Register offset definitions */ -/* Advantech PCI-1730/3/4 */ -#define PCI1730_3_INT_EN 0x08 /* R/W: enable/disable interrupts */ -#define PCI1730_3_INT_RF 0x0c /* R/W: set falling/raising edge for - * interrupts */ -#define PCI1730_3_INT_CLR 0x10 /* R/W: clear interrupts */ - -/* Advantech PCI-1736UP */ -#define PCI1736_3_INT_EN 0x08 /* R/W: enable/disable interrupts */ -#define PCI1736_3_INT_RF 0x0c /* R/W: set falling/raising edge for - * interrupts */ -#define PCI1736_3_INT_CLR 0x10 /* R/W: clear interrupts */ +/* + * Register offset definitions + */ + +/* PCI-1730, PCI-1733, PCI-1736 interrupt control registers */ +#define PCI173X_INT_EN_REG 0x08 /* R/W: enable/disable */ +#define PCI173X_INT_RF_REG 0x0c /* R/W: falling/rising edge */ +#define PCI173X_INT_CLR_REG 0x10 /* R/W: clear */ /* Advantech PCI-1739U */ #define PCI1739_ICR 32 /* W: Interrupt control register */ @@ -311,14 +307,10 @@ static int pci_dio_reset(struct comedi_device *dev) switch (board->cardtype) { case TYPE_PCI1730: case TYPE_PCI1733: - outb(0, dev->iobase + PCI1730_3_INT_EN); - outb(0x0f, dev->iobase + PCI1730_3_INT_CLR); - outb(0, dev->iobase + PCI1730_3_INT_RF); - break; case TYPE_PCI1736: - outb(0, dev->iobase + PCI1736_3_INT_EN); - outb(0x0f, dev->iobase + PCI1736_3_INT_CLR); - outb(0, dev->iobase + PCI1736_3_INT_RF); + outb(0, dev->iobase + PCI173X_INT_EN_REG); + outb(0x0f, dev->iobase + PCI173X_INT_CLR_REG); + outb(0, dev->iobase + PCI173X_INT_RF_REG); break; case TYPE_PCI1739: outb(0x88, dev->iobase + PCI1739_ICR);