From: Koen Vandeputte Date: Mon, 5 Nov 2018 11:53:55 +0000 (+0100) Subject: ar71xx: disable some tiny targets with kernel 4.14 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=860de2e1aa9deac7dce76b7f85cb5fcfbba00468;p=openwrt%2Fstaging%2Fneocturne.git ar71xx: disable some tiny targets with kernel 4.14 The bump to kernel 4.14 caused a massive increase in kernel size. For most targets, switching them to dynamic partitioning allowed to cope with this. On some targets, the kernel partition is located behind the rootfs, which disallows switching to dynamic partitioning as the boot location would be altered, requiring a u-boot change. Also within the tiny section, which disables kernel symbols etc to decrease the image size, the partition size is still too small. Disable these targets for now, fixing image generation: - Buffalo BHR-4GRV2 - Zbtlink ZBT-WE1526 Signed-off-by: Koen Vandeputte --- diff --git a/target/linux/ar71xx/image/tiny.mk b/target/linux/ar71xx/image/tiny.mk index 86ed2c7f2b..aabe68c2b9 100644 --- a/target/linux/ar71xx/image/tiny.mk +++ b/target/linux/ar71xx/image/tiny.mk @@ -9,7 +9,6 @@ define Device/bhr-4grv2 IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE) IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | mkbuffaloimg endef -TARGET_DEVICES += bhr-4grv2 define Device/zbt-we1526 DEVICE_TITLE := Zbtlink ZBT-WE1526 @@ -21,4 +20,3 @@ define Device/zbt-we1526 MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware) IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE) endef -TARGET_DEVICES += zbt-we1526 \ No newline at end of file