From: Matt Carlson Date: Tue, 12 Jan 2010 10:11:37 +0000 (+0000) Subject: tg3: Fix std rx prod ring handling X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=86cfe4ff02a51294cb2c974a8bedc7f648491df9;p=openwrt%2Fstaging%2Fblogic.git tg3: Fix std rx prod ring handling There are some tg3 devices that require the driver to post new rx buffers in smaller increments. Commit 4361935afe3abc3e5a93006b99197fac1fabbd50, "tg3: Consider rx_std_prod_idx a hw mailbox" changed how the driver tracks the rx producer ring updates, but it does not make any special considerations for the above-mentioned devices. For those devices, it is possible for the driver to hit the special case path, which updates the hardware mailbox register but skips updating the shadow software mailbox member. If the special case path represents the final mailbox update for this ISR iteration, the hardware and software mailbox values will be out of sync. Ultimately, this will cause the driver to use a stale mailbox value on the next iteration, which will appear to the hardware as a large rx buffer update. Bad things ensue. The fix is to update the software shadow mailbox member when the special case path is taken. Signed-off-by: Matt Carlson Reviewed-by: Michael Chan Reported-by: Dmitry Torokhov Signed-off-by: David S. Miller --- diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 5c77e6a48705..4e8b87d1ffa9 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -4693,8 +4693,9 @@ next_pkt: (*post_ptr)++; if (unlikely(rx_std_posted >= tp->rx_std_max_post)) { - u32 idx = *post_ptr % TG3_RX_RING_SIZE; - tw32_rx_mbox(TG3_RX_STD_PROD_IDX_REG, idx); + tpr->rx_std_prod_idx = std_prod_idx % TG3_RX_RING_SIZE; + tw32_rx_mbox(TG3_RX_STD_PROD_IDX_REG, + tpr->rx_std_prod_idx); work_mask &= ~RXD_OPAQUE_RING_STD; rx_std_posted = 0; }