From: Kunihiko Hayashi Date: Thu, 29 Nov 2018 08:08:37 +0000 (+0900) Subject: net: ethernet: ave: Replace NET_IP_ALIGN with AVE_FRAME_HEADROOM X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=88113957ddb7b7d5451e28cd708c82ea7e63b097;p=openwrt%2Fstaging%2Fblogic.git net: ethernet: ave: Replace NET_IP_ALIGN with AVE_FRAME_HEADROOM In commit 26a4676faa1a ("arm64: mm: define NET_IP_ALIGN to 0"), AVE controller affects this modification because the controller forces to ignore lower 2bits of buffer start address, and make 2-byte headroom, that is, data reception starts from (buffer + 2). This patch defines AVE_FRAME_HEADROOM macro as hardware-specific value, and replaces NET_IP_ALIGN with it. Signed-off-by: Kunihiko Hayashi Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/socionext/sni_ave.c b/drivers/net/ethernet/socionext/sni_ave.c index 29b5b12bce6c..0da11344d035 100644 --- a/drivers/net/ethernet/socionext/sni_ave.c +++ b/drivers/net/ethernet/socionext/sni_ave.c @@ -194,6 +194,7 @@ /* Parameter for ethernet frame */ #define AVE_MAX_ETHFRAME 1518 +#define AVE_FRAME_HEADROOM 2 /* Parameter for interrupt */ #define AVE_INTM_COUNT 20 @@ -576,12 +577,13 @@ static int ave_rxdesc_prepare(struct net_device *ndev, int entry) skb = priv->rx.desc[entry].skbs; if (!skb) { - skb = netdev_alloc_skb_ip_align(ndev, - AVE_MAX_ETHFRAME); + skb = netdev_alloc_skb(ndev, AVE_MAX_ETHFRAME); if (!skb) { netdev_err(ndev, "can't allocate skb for Rx\n"); return -ENOMEM; } + skb->data += AVE_FRAME_HEADROOM; + skb->tail += AVE_FRAME_HEADROOM; } /* set disable to cmdsts */ @@ -594,12 +596,12 @@ static int ave_rxdesc_prepare(struct net_device *ndev, int entry) * - Rx buffer begins with 2 byte headroom, and data will be put from * (buffer + 2). * To satisfy this, specify the address to put back the buffer - * pointer advanced by NET_IP_ALIGN by netdev_alloc_skb_ip_align(), - * and expand the map size by NET_IP_ALIGN. + * pointer advanced by AVE_FRAME_HEADROOM, and expand the map size + * by AVE_FRAME_HEADROOM. */ ret = ave_dma_map(ndev, &priv->rx.desc[entry], - skb->data - NET_IP_ALIGN, - AVE_MAX_ETHFRAME + NET_IP_ALIGN, + skb->data - AVE_FRAME_HEADROOM, + AVE_MAX_ETHFRAME + AVE_FRAME_HEADROOM, DMA_FROM_DEVICE, &paddr); if (ret) { netdev_err(ndev, "can't map skb for Rx\n");