From: Nick Dyer Date: Tue, 4 Aug 2015 23:57:25 +0000 (-0700) Subject: Input: atmel_mxt_ts - disable interrupt for 50ms after reset X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=885f3fb9fa1f9e185e8a4e905157087495734349;p=openwrt%2Fstaging%2Fblogic.git Input: atmel_mxt_ts - disable interrupt for 50ms after reset The CHG/interrupt line is momentarily set (approximately 100 ms) as an input after power-up or reset for diagnostic purposes. This may cause spurious interrupts, so disable interrupt handler during this period. Signed-off-by: Nick Dyer Signed-off-by: Dmitry Torokhov --- diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 08d9a0921798..d36da65f8c72 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -1098,7 +1098,9 @@ static int mxt_soft_reset(struct mxt_data *data) struct device *dev = &data->client->dev; int ret = 0; - dev_info(dev, "Resetting chip\n"); + dev_info(dev, "Resetting device\n"); + + disable_irq(data->irq); reinit_completion(&data->reset_completion); @@ -1106,6 +1108,11 @@ static int mxt_soft_reset(struct mxt_data *data) if (ret) return ret; + /* Ignore CHG line for 100ms after reset */ + msleep(100); + + enable_irq(data->irq); + ret = mxt_wait_for_completion(data, &data->reset_completion, MXT_RESET_TIMEOUT); if (ret)