From: David S. Miller Date: Fri, 7 Oct 2011 17:38:43 +0000 (-0400) Subject: Merge branch 'master' of github.com:davem330/net X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=88c5100c28b02c4b2b2c6f6fafbbd76d90f698b9;p=openwrt%2Fstaging%2Fblogic.git Merge branch 'master' of github.com:davem330/net Conflicts: net/batman-adv/soft-interface.c --- 88c5100c28b02c4b2b2c6f6fafbbd76d90f698b9 diff --cc Documentation/networking/ip-sysctl.txt index 98c8d4229f0a,ca5cdcd0f0e3..cb7f3148035d --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@@ -1042,14 -1042,9 +1042,14 @@@ conf/interface/* The functional behaviour for certain settings is different depending on whether local forwarding is enabled or not. - accept_ra - BOOLEAN + accept_ra - INTEGER Accept Router Advertisements; autoconfigure using them. + It also determines whether or not to transmit Router + Solicitations. If and only if the functional setting is to + accept Router Advertisements, Router Solicitations will be + transmitted. + Possible values are: 0 Do not accept Router Advertisements. 1 Accept Router Advertisements if forwarding is disabled. diff --cc drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c index 0b9bd551580b,000000000000..51bd7485ab18 mode 100644,000000..100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c @@@ -1,2510 -1,0 +1,2511 @@@ +/* bnx2x_dcb.c: Broadcom Everest network driver. + * + * Copyright 2009-2011 Broadcom Corporation + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2, available + * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL"). + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other Broadcom software provided under a + * license other than the GPL, without Broadcom's express prior written + * consent. + * + * Maintained by: Eilon Greenstein + * Written by: Dmitry Kravkov + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include + +#include "bnx2x.h" +#include "bnx2x_cmn.h" +#include "bnx2x_dcb.h" + +/* forward declarations of dcbx related functions */ +static int bnx2x_dcbx_stop_hw_tx(struct bnx2x *bp); +static void bnx2x_pfc_set_pfc(struct bnx2x *bp); +static void bnx2x_dcbx_update_ets_params(struct bnx2x *bp); +static int bnx2x_dcbx_resume_hw_tx(struct bnx2x *bp); +static void bnx2x_dcbx_get_ets_pri_pg_tbl(struct bnx2x *bp, + u32 *set_configuration_ets_pg, + u32 *pri_pg_tbl); +static void bnx2x_dcbx_get_num_pg_traf_type(struct bnx2x *bp, + u32 *pg_pri_orginal_spread, + struct pg_help_data *help_data); +static void bnx2x_dcbx_fill_cos_params(struct bnx2x *bp, + struct pg_help_data *help_data, + struct dcbx_ets_feature *ets, + u32 *pg_pri_orginal_spread); +static void bnx2x_dcbx_separate_pauseable_from_non(struct bnx2x *bp, + struct cos_help_data *cos_data, + u32 *pg_pri_orginal_spread, + struct dcbx_ets_feature *ets); +static void bnx2x_dcbx_fw_struct(struct bnx2x *bp, + struct bnx2x_func_tx_start_params*); + +/* helpers: read/write len bytes from addr into buff by REG_RD/REG_WR */ +static void bnx2x_read_data(struct bnx2x *bp, u32 *buff, + u32 addr, u32 len) +{ + int i; + for (i = 0; i < len; i += 4, buff++) + *buff = REG_RD(bp, addr + i); +} + +static void bnx2x_write_data(struct bnx2x *bp, u32 *buff, + u32 addr, u32 len) +{ + int i; + for (i = 0; i < len; i += 4, buff++) + REG_WR(bp, addr + i, *buff); +} + +static void bnx2x_pfc_set(struct bnx2x *bp) +{ + struct bnx2x_nig_brb_pfc_port_params pfc_params = {0}; + u32 pri_bit, val = 0; + int i; + + pfc_params.num_of_rx_cos_priority_mask = + bp->dcbx_port_params.ets.num_of_cos; + + /* Tx COS configuration */ + for (i = 0; i < bp->dcbx_port_params.ets.num_of_cos; i++) + /* + * We configure only the pauseable bits (non pauseable aren't + * configured at all) it's done to avoid false pauses from + * network + */ + pfc_params.rx_cos_priority_mask[i] = + bp->dcbx_port_params.ets.cos_params[i].pri_bitmask + & DCBX_PFC_PRI_PAUSE_MASK(bp); + + /* + * Rx COS configuration + * Changing PFC RX configuration . + * In RX COS0 will always be configured to lossy and COS1 to lossless + */ + for (i = 0 ; i < MAX_PFC_PRIORITIES ; i++) { + pri_bit = 1 << i; + + if (pri_bit & DCBX_PFC_PRI_PAUSE_MASK(bp)) + val |= 1 << (i * 4); + } + + pfc_params.pkt_priority_to_cos = val; + + /* RX COS0 */ + pfc_params.llfc_low_priority_classes = 0; + /* RX COS1 */ + pfc_params.llfc_high_priority_classes = DCBX_PFC_PRI_PAUSE_MASK(bp); + + /* BRB configuration */ + pfc_params.cos0_pauseable = false; + pfc_params.cos1_pauseable = true; + + bnx2x_acquire_phy_lock(bp); + bp->link_params.feature_config_flags |= FEATURE_CONFIG_PFC_ENABLED; + bnx2x_update_pfc(&bp->link_params, &bp->link_vars, &pfc_params); + bnx2x_release_phy_lock(bp); +} + +static void bnx2x_pfc_clear(struct bnx2x *bp) +{ + struct bnx2x_nig_brb_pfc_port_params nig_params = {0}; + nig_params.pause_enable = 1; +#ifdef BNX2X_SAFC + if (bp->flags & SAFC_TX_FLAG) { + u32 high = 0, low = 0; + int i; + + for (i = 0; i < BNX2X_MAX_PRIORITY; i++) { + if (bp->pri_map[i] == 1) + high |= (1 << i); + if (bp->pri_map[i] == 0) + low |= (1 << i); + } + + nig_params.llfc_low_priority_classes = high; + nig_params.llfc_low_priority_classes = low; + + nig_params.pause_enable = 0; + nig_params.llfc_enable = 1; + nig_params.llfc_out_en = 1; + } +#endif /* BNX2X_SAFC */ + bnx2x_acquire_phy_lock(bp); + bp->link_params.feature_config_flags &= ~FEATURE_CONFIG_PFC_ENABLED; + bnx2x_update_pfc(&bp->link_params, &bp->link_vars, &nig_params); + bnx2x_release_phy_lock(bp); +} + +static void bnx2x_dump_dcbx_drv_param(struct bnx2x *bp, + struct dcbx_features *features, + u32 error) +{ + u8 i = 0; + DP(NETIF_MSG_LINK, "local_mib.error %x\n", error); + + /* PG */ + DP(NETIF_MSG_LINK, + "local_mib.features.ets.enabled %x\n", features->ets.enabled); + for (i = 0; i < DCBX_MAX_NUM_PG_BW_ENTRIES; i++) + DP(NETIF_MSG_LINK, + "local_mib.features.ets.pg_bw_tbl[%d] %d\n", i, + DCBX_PG_BW_GET(features->ets.pg_bw_tbl, i)); + for (i = 0; i < DCBX_MAX_NUM_PRI_PG_ENTRIES; i++) + DP(NETIF_MSG_LINK, + "local_mib.features.ets.pri_pg_tbl[%d] %d\n", i, + DCBX_PRI_PG_GET(features->ets.pri_pg_tbl, i)); + + /* pfc */ + DP(NETIF_MSG_LINK, "dcbx_features.pfc.pri_en_bitmap %x\n", + features->pfc.pri_en_bitmap); + DP(NETIF_MSG_LINK, "dcbx_features.pfc.pfc_caps %x\n", + features->pfc.pfc_caps); + DP(NETIF_MSG_LINK, "dcbx_features.pfc.enabled %x\n", + features->pfc.enabled); + + DP(NETIF_MSG_LINK, "dcbx_features.app.default_pri %x\n", + features->app.default_pri); + DP(NETIF_MSG_LINK, "dcbx_features.app.tc_supported %x\n", + features->app.tc_supported); + DP(NETIF_MSG_LINK, "dcbx_features.app.enabled %x\n", + features->app.enabled); + for (i = 0; i < DCBX_MAX_APP_PROTOCOL; i++) { + DP(NETIF_MSG_LINK, + "dcbx_features.app.app_pri_tbl[%x].app_id %x\n", + i, features->app.app_pri_tbl[i].app_id); + DP(NETIF_MSG_LINK, + "dcbx_features.app.app_pri_tbl[%x].pri_bitmap %x\n", + i, features->app.app_pri_tbl[i].pri_bitmap); + DP(NETIF_MSG_LINK, + "dcbx_features.app.app_pri_tbl[%x].appBitfield %x\n", + i, features->app.app_pri_tbl[i].appBitfield); + } +} + +static void bnx2x_dcbx_get_ap_priority(struct bnx2x *bp, + u8 pri_bitmap, + u8 llfc_traf_type) +{ + u32 pri = MAX_PFC_PRIORITIES; + u32 index = MAX_PFC_PRIORITIES - 1; + u32 pri_mask; + u32 *ttp = bp->dcbx_port_params.app.traffic_type_priority; + + /* Choose the highest priority */ + while ((MAX_PFC_PRIORITIES == pri) && (0 != index)) { + pri_mask = 1 << index; + if (GET_FLAGS(pri_bitmap, pri_mask)) + pri = index ; + index--; + } + + if (pri < MAX_PFC_PRIORITIES) + ttp[llfc_traf_type] = max_t(u32, ttp[llfc_traf_type], pri); +} + +static void bnx2x_dcbx_get_ap_feature(struct bnx2x *bp, + struct dcbx_app_priority_feature *app, + u32 error) { + u8 index; + u32 *ttp = bp->dcbx_port_params.app.traffic_type_priority; + + if (GET_FLAGS(error, DCBX_LOCAL_APP_ERROR)) + DP(NETIF_MSG_LINK, "DCBX_LOCAL_APP_ERROR\n"); + + if (GET_FLAGS(error, DCBX_LOCAL_APP_MISMATCH)) + DP(NETIF_MSG_LINK, "DCBX_LOCAL_APP_MISMATCH\n"); + + if (app->enabled && + !GET_FLAGS(error, DCBX_LOCAL_APP_ERROR | DCBX_LOCAL_APP_MISMATCH)) { + + bp->dcbx_port_params.app.enabled = true; + + for (index = 0 ; index < LLFC_DRIVER_TRAFFIC_TYPE_MAX; index++) + ttp[index] = 0; + + if (app->default_pri < MAX_PFC_PRIORITIES) + ttp[LLFC_TRAFFIC_TYPE_NW] = app->default_pri; + + for (index = 0 ; index < DCBX_MAX_APP_PROTOCOL; index++) { + struct dcbx_app_priority_entry *entry = + app->app_pri_tbl; + + if (GET_FLAGS(entry[index].appBitfield, + DCBX_APP_SF_ETH_TYPE) && + ETH_TYPE_FCOE == entry[index].app_id) + bnx2x_dcbx_get_ap_priority(bp, + entry[index].pri_bitmap, + LLFC_TRAFFIC_TYPE_FCOE); + + if (GET_FLAGS(entry[index].appBitfield, + DCBX_APP_SF_PORT) && + TCP_PORT_ISCSI == entry[index].app_id) + bnx2x_dcbx_get_ap_priority(bp, + entry[index].pri_bitmap, + LLFC_TRAFFIC_TYPE_ISCSI); + } + } else { + DP(NETIF_MSG_LINK, "DCBX_LOCAL_APP_DISABLED\n"); + bp->dcbx_port_params.app.enabled = false; + for (index = 0 ; index < LLFC_DRIVER_TRAFFIC_TYPE_MAX; index++) + ttp[index] = INVALID_TRAFFIC_TYPE_PRIORITY; + } +} + +static void bnx2x_dcbx_get_ets_feature(struct bnx2x *bp, + struct dcbx_ets_feature *ets, + u32 error) { + int i = 0; + u32 pg_pri_orginal_spread[DCBX_MAX_NUM_PG_BW_ENTRIES] = {0}; + struct pg_help_data pg_help_data; + struct bnx2x_dcbx_cos_params *cos_params = + bp->dcbx_port_params.ets.cos_params; + + memset(&pg_help_data, 0, sizeof(struct pg_help_data)); + + + if (GET_FLAGS(error, DCBX_LOCAL_ETS_ERROR)) + DP(NETIF_MSG_LINK, "DCBX_LOCAL_ETS_ERROR\n"); + + + /* Clean up old settings of ets on COS */ + for (i = 0; i < ARRAY_SIZE(bp->dcbx_port_params.ets.cos_params) ; i++) { + cos_params[i].pauseable = false; + cos_params[i].strict = BNX2X_DCBX_STRICT_INVALID; + cos_params[i].bw_tbl = DCBX_INVALID_COS_BW; + cos_params[i].pri_bitmask = 0; + } + + if (bp->dcbx_port_params.app.enabled && + !GET_FLAGS(error, DCBX_LOCAL_ETS_ERROR) && + ets->enabled) { + DP(NETIF_MSG_LINK, "DCBX_LOCAL_ETS_ENABLE\n"); + bp->dcbx_port_params.ets.enabled = true; + + bnx2x_dcbx_get_ets_pri_pg_tbl(bp, + pg_pri_orginal_spread, + ets->pri_pg_tbl); + + bnx2x_dcbx_get_num_pg_traf_type(bp, + pg_pri_orginal_spread, + &pg_help_data); + + bnx2x_dcbx_fill_cos_params(bp, &pg_help_data, + ets, pg_pri_orginal_spread); + + } else { + DP(NETIF_MSG_LINK, "DCBX_LOCAL_ETS_DISABLED\n"); + bp->dcbx_port_params.ets.enabled = false; + ets->pri_pg_tbl[0] = 0; + + for (i = 0; i < DCBX_MAX_NUM_PRI_PG_ENTRIES ; i++) + DCBX_PG_BW_SET(ets->pg_bw_tbl, i, 1); + } +} + +static void bnx2x_dcbx_get_pfc_feature(struct bnx2x *bp, + struct dcbx_pfc_feature *pfc, u32 error) +{ + + if (GET_FLAGS(error, DCBX_LOCAL_PFC_ERROR)) + DP(NETIF_MSG_LINK, "DCBX_LOCAL_PFC_ERROR\n"); + + if (bp->dcbx_port_params.app.enabled && + !GET_FLAGS(error, DCBX_LOCAL_PFC_ERROR | DCBX_LOCAL_PFC_MISMATCH) && + pfc->enabled) { + bp->dcbx_port_params.pfc.enabled = true; + bp->dcbx_port_params.pfc.priority_non_pauseable_mask = + ~(pfc->pri_en_bitmap); + } else { + DP(NETIF_MSG_LINK, "DCBX_LOCAL_PFC_DISABLED\n"); + bp->dcbx_port_params.pfc.enabled = false; + bp->dcbx_port_params.pfc.priority_non_pauseable_mask = 0; + } +} + +/* maps unmapped priorities to to the same COS as L2 */ +static void bnx2x_dcbx_map_nw(struct bnx2x *bp) +{ + int i; + u32 unmapped = (1 << MAX_PFC_PRIORITIES) - 1; /* all ones */ + u32 *ttp = bp->dcbx_port_params.app.traffic_type_priority; + u32 nw_prio = 1 << ttp[LLFC_TRAFFIC_TYPE_NW]; + struct bnx2x_dcbx_cos_params *cos_params = + bp->dcbx_port_params.ets.cos_params; + + /* get unmapped priorities by clearing mapped bits */ + for (i = 0; i < LLFC_DRIVER_TRAFFIC_TYPE_MAX; i++) + unmapped &= ~(1 << ttp[i]); + + /* find cos for nw prio and extend it with unmapped */ + for (i = 0; i < ARRAY_SIZE(bp->dcbx_port_params.ets.cos_params); i++) { + if (cos_params[i].pri_bitmask & nw_prio) { + /* extend the bitmask with unmapped */ + DP(NETIF_MSG_LINK, + "cos %d extended with 0x%08x\n", i, unmapped); + cos_params[i].pri_bitmask |= unmapped; + break; + } + } +} + +static void bnx2x_get_dcbx_drv_param(struct bnx2x *bp, + struct dcbx_features *features, + u32 error) +{ + bnx2x_dcbx_get_ap_feature(bp, &features->app, error); + + bnx2x_dcbx_get_pfc_feature(bp, &features->pfc, error); + + bnx2x_dcbx_get_ets_feature(bp, &features->ets, error); + + bnx2x_dcbx_map_nw(bp); +} + +#define DCBX_LOCAL_MIB_MAX_TRY_READ (100) +static int bnx2x_dcbx_read_mib(struct bnx2x *bp, + u32 *base_mib_addr, + u32 offset, + int read_mib_type) +{ + int max_try_read = 0; + u32 mib_size, prefix_seq_num, suffix_seq_num; + struct lldp_remote_mib *remote_mib ; + struct lldp_local_mib *local_mib; + + + switch (read_mib_type) { + case DCBX_READ_LOCAL_MIB: + mib_size = sizeof(struct lldp_local_mib); + break; + case DCBX_READ_REMOTE_MIB: + mib_size = sizeof(struct lldp_remote_mib); + break; + default: + return 1; /*error*/ + } + + offset += BP_PORT(bp) * mib_size; + + do { + bnx2x_read_data(bp, base_mib_addr, offset, mib_size); + + max_try_read++; + + switch (read_mib_type) { + case DCBX_READ_LOCAL_MIB: + local_mib = (struct lldp_local_mib *) base_mib_addr; + prefix_seq_num = local_mib->prefix_seq_num; + suffix_seq_num = local_mib->suffix_seq_num; + break; + case DCBX_READ_REMOTE_MIB: + remote_mib = (struct lldp_remote_mib *) base_mib_addr; + prefix_seq_num = remote_mib->prefix_seq_num; + suffix_seq_num = remote_mib->suffix_seq_num; + break; + default: + return 1; /*error*/ + } + } while ((prefix_seq_num != suffix_seq_num) && + (max_try_read < DCBX_LOCAL_MIB_MAX_TRY_READ)); + + if (max_try_read >= DCBX_LOCAL_MIB_MAX_TRY_READ) { + BNX2X_ERR("MIB could not be read\n"); + return 1; + } + + return 0; +} + +static void bnx2x_pfc_set_pfc(struct bnx2x *bp) +{ + if (bp->dcbx_port_params.pfc.enabled && + !(bp->dcbx_error & DCBX_REMOTE_MIB_ERROR)) + /* + * 1. Fills up common PFC structures if required + * 2. Configure NIG, MAC and BRB via the elink + */ + bnx2x_pfc_set(bp); + else + bnx2x_pfc_clear(bp); +} + +static int bnx2x_dcbx_stop_hw_tx(struct bnx2x *bp) +{ + struct bnx2x_func_state_params func_params = {0}; + + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_TX_STOP; + + DP(NETIF_MSG_LINK, "STOP TRAFFIC\n"); + return bnx2x_func_state_change(bp, &func_params); +} + +static int bnx2x_dcbx_resume_hw_tx(struct bnx2x *bp) +{ + struct bnx2x_func_state_params func_params = {0}; + struct bnx2x_func_tx_start_params *tx_params = + &func_params.params.tx_start; + + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_TX_START; + + bnx2x_dcbx_fw_struct(bp, tx_params); + + DP(NETIF_MSG_LINK, "START TRAFFIC\n"); + return bnx2x_func_state_change(bp, &func_params); +} + +static void bnx2x_dcbx_2cos_limit_update_ets_config(struct bnx2x *bp) +{ + struct bnx2x_dcbx_pg_params *ets = &(bp->dcbx_port_params.ets); + int rc = 0; + + if (ets->num_of_cos == 0 || ets->num_of_cos > DCBX_COS_MAX_NUM_E2) { + BNX2X_ERR("Illegal number of COSes %d\n", ets->num_of_cos); + return; + } + + /* valid COS entries */ + if (ets->num_of_cos == 1) /* no ETS */ + return; + + /* sanity */ + if (((BNX2X_DCBX_STRICT_INVALID == ets->cos_params[0].strict) && + (DCBX_INVALID_COS_BW == ets->cos_params[0].bw_tbl)) || + ((BNX2X_DCBX_STRICT_INVALID == ets->cos_params[1].strict) && + (DCBX_INVALID_COS_BW == ets->cos_params[1].bw_tbl))) { + BNX2X_ERR("all COS should have at least bw_limit or strict" + "ets->cos_params[0].strict= %x" + "ets->cos_params[0].bw_tbl= %x" + "ets->cos_params[1].strict= %x" + "ets->cos_params[1].bw_tbl= %x", + ets->cos_params[0].strict, + ets->cos_params[0].bw_tbl, + ets->cos_params[1].strict, + ets->cos_params[1].bw_tbl); + return; + } + /* If we join a group and there is bw_tbl and strict then bw rules */ + if ((DCBX_INVALID_COS_BW != ets->cos_params[0].bw_tbl) && + (DCBX_INVALID_COS_BW != ets->cos_params[1].bw_tbl)) { + u32 bw_tbl_0 = ets->cos_params[0].bw_tbl; + u32 bw_tbl_1 = ets->cos_params[1].bw_tbl; + /* Do not allow 0-100 configuration + * since PBF does not support it + * force 1-99 instead + */ + if (bw_tbl_0 == 0) { + bw_tbl_0 = 1; + bw_tbl_1 = 99; + } else if (bw_tbl_1 == 0) { + bw_tbl_1 = 1; + bw_tbl_0 = 99; + } + + bnx2x_ets_bw_limit(&bp->link_params, bw_tbl_0, bw_tbl_1); + } else { + if (ets->cos_params[0].strict == BNX2X_DCBX_STRICT_COS_HIGHEST) + rc = bnx2x_ets_strict(&bp->link_params, 0); + else if (ets->cos_params[1].strict + == BNX2X_DCBX_STRICT_COS_HIGHEST) + rc = bnx2x_ets_strict(&bp->link_params, 1); + if (rc) + BNX2X_ERR("update_ets_params failed\n"); + } +} + +/* + * In E3B0 the configuration may have more than 2 COS. + */ +void bnx2x_dcbx_update_ets_config(struct bnx2x *bp) +{ + struct bnx2x_dcbx_pg_params *ets = &(bp->dcbx_port_params.ets); + struct bnx2x_ets_params ets_params = { 0 }; + u8 i; + + ets_params.num_of_cos = ets->num_of_cos; + + for (i = 0; i < ets->num_of_cos; i++) { + /* COS is SP */ + if (ets->cos_params[i].strict != BNX2X_DCBX_STRICT_INVALID) { + if (ets->cos_params[i].bw_tbl != DCBX_INVALID_COS_BW) { + BNX2X_ERR("COS can't be not BW and not SP\n"); + return; + } + + ets_params.cos[i].state = bnx2x_cos_state_strict; + ets_params.cos[i].params.sp_params.pri = + ets->cos_params[i].strict; + } else { /* COS is BW */ + if (ets->cos_params[i].bw_tbl == DCBX_INVALID_COS_BW) { + BNX2X_ERR("COS can't be not BW and not SP\n"); + return; + } + ets_params.cos[i].state = bnx2x_cos_state_bw; + ets_params.cos[i].params.bw_params.bw = + (u8)ets->cos_params[i].bw_tbl; + } + } + + /* Configure the ETS in HW */ + if (bnx2x_ets_e3b0_config(&bp->link_params, &bp->link_vars, + &ets_params)) { + BNX2X_ERR("bnx2x_ets_e3b0_config failed\n"); + bnx2x_ets_disabled(&bp->link_params, &bp->link_vars); + } +} + +static void bnx2x_dcbx_update_ets_params(struct bnx2x *bp) +{ + bnx2x_ets_disabled(&bp->link_params, &bp->link_vars); + + if (!bp->dcbx_port_params.ets.enabled || + (bp->dcbx_error & DCBX_REMOTE_MIB_ERROR)) + return; + + if (CHIP_IS_E3B0(bp)) + bnx2x_dcbx_update_ets_config(bp); + else + bnx2x_dcbx_2cos_limit_update_ets_config(bp); +} + +#ifdef BCM_DCBNL +static int bnx2x_dcbx_read_shmem_remote_mib(struct bnx2x *bp) +{ + struct lldp_remote_mib remote_mib = {0}; + u32 dcbx_remote_mib_offset = SHMEM2_RD(bp, dcbx_remote_mib_offset); + int rc; + + DP(NETIF_MSG_LINK, "dcbx_remote_mib_offset 0x%x\n", + dcbx_remote_mib_offset); + + if (SHMEM_DCBX_REMOTE_MIB_NONE == dcbx_remote_mib_offset) { + BNX2X_ERR("FW doesn't support dcbx_remote_mib_offset\n"); + return -EINVAL; + } + + rc = bnx2x_dcbx_read_mib(bp, (u32 *)&remote_mib, dcbx_remote_mib_offset, + DCBX_READ_REMOTE_MIB); + + if (rc) { + BNX2X_ERR("Faild to read remote mib from FW\n"); + return rc; + } + + /* save features and flags */ + bp->dcbx_remote_feat = remote_mib.features; + bp->dcbx_remote_flags = remote_mib.flags; + return 0; +} +#endif + +static int bnx2x_dcbx_read_shmem_neg_results(struct bnx2x *bp) +{ + struct lldp_local_mib local_mib = {0}; + u32 dcbx_neg_res_offset = SHMEM2_RD(bp, dcbx_neg_res_offset); + int rc; + + DP(NETIF_MSG_LINK, "dcbx_neg_res_offset 0x%x\n", dcbx_neg_res_offset); + + if (SHMEM_DCBX_NEG_RES_NONE == dcbx_neg_res_offset) { + BNX2X_ERR("FW doesn't support dcbx_neg_res_offset\n"); + return -EINVAL; + } + + rc = bnx2x_dcbx_read_mib(bp, (u32 *)&local_mib, dcbx_neg_res_offset, + DCBX_READ_LOCAL_MIB); + + if (rc) { + BNX2X_ERR("Faild to read local mib from FW\n"); + return rc; + } + + /* save features and error */ + bp->dcbx_local_feat = local_mib.features; + bp->dcbx_error = local_mib.error; + return 0; +} + + +#ifdef BCM_DCBNL +static inline +u8 bnx2x_dcbx_dcbnl_app_up(struct dcbx_app_priority_entry *ent) +{ + u8 pri; + + /* Choose the highest priority */ + for (pri = MAX_PFC_PRIORITIES - 1; pri > 0; pri--) + if (ent->pri_bitmap & (1 << pri)) + break; + return pri; +} + +static inline +u8 bnx2x_dcbx_dcbnl_app_idtype(struct dcbx_app_priority_entry *ent) +{ + return ((ent->appBitfield & DCBX_APP_ENTRY_SF_MASK) == + DCBX_APP_SF_PORT) ? DCB_APP_IDTYPE_PORTNUM : + DCB_APP_IDTYPE_ETHTYPE; +} + +int bnx2x_dcbnl_update_applist(struct bnx2x *bp, bool delall) +{ + int i, err = 0; + + for (i = 0; i < DCBX_MAX_APP_PROTOCOL && err == 0; i++) { + struct dcbx_app_priority_entry *ent = + &bp->dcbx_local_feat.app.app_pri_tbl[i]; + + if (ent->appBitfield & DCBX_APP_ENTRY_VALID) { + u8 up = bnx2x_dcbx_dcbnl_app_up(ent); + + /* avoid invalid user-priority */ + if (up) { + struct dcb_app app; + app.selector = bnx2x_dcbx_dcbnl_app_idtype(ent); + app.protocol = ent->app_id; + app.priority = delall ? 0 : up; + err = dcb_setapp(bp->dev, &app); + } + } + } + return err; +} +#endif + +static inline void bnx2x_update_drv_flags(struct bnx2x *bp, u32 flags, u32 set) +{ + if (SHMEM2_HAS(bp, drv_flags)) { + u32 drv_flags; + bnx2x_acquire_hw_lock(bp, HW_LOCK_DRV_FLAGS); + drv_flags = SHMEM2_RD(bp, drv_flags); + + if (set) + SET_FLAGS(drv_flags, flags); + else + RESET_FLAGS(drv_flags, flags); + + SHMEM2_WR(bp, drv_flags, drv_flags); + DP(NETIF_MSG_HW, "drv_flags 0x%08x\n", drv_flags); + bnx2x_release_hw_lock(bp, HW_LOCK_DRV_FLAGS); + } +} + +static inline void bnx2x_dcbx_update_tc_mapping(struct bnx2x *bp) +{ + u8 prio, cos; + for (cos = 0; cos < bp->dcbx_port_params.ets.num_of_cos; cos++) { + for (prio = 0; prio < BNX2X_MAX_PRIORITY; prio++) { + if (bp->dcbx_port_params.ets.cos_params[cos].pri_bitmask + & (1 << prio)) { + bp->prio_to_cos[prio] = cos; + DP(NETIF_MSG_LINK, + "tx_mapping %d --> %d\n", prio, cos); + } + } + } + + /* setup tc must be called under rtnl lock, but we can't take it here + * as we are handling an attetntion on a work queue which must be + * flushed at some rtnl-locked contexts (e.g. if down) + */ + if (!test_and_set_bit(BNX2X_SP_RTNL_SETUP_TC, &bp->sp_rtnl_state)) + schedule_delayed_work(&bp->sp_rtnl_task, 0); +} + +void bnx2x_dcbx_set_params(struct bnx2x *bp, u32 state) +{ + switch (state) { + case BNX2X_DCBX_STATE_NEG_RECEIVED: + { + DP(NETIF_MSG_LINK, "BNX2X_DCBX_STATE_NEG_RECEIVED\n"); +#ifdef BCM_DCBNL + /** + * Delete app tlvs from dcbnl before reading new + * negotiation results + */ + bnx2x_dcbnl_update_applist(bp, true); + + /* Read rmeote mib if dcbx is in the FW */ + if (bnx2x_dcbx_read_shmem_remote_mib(bp)) + return; +#endif + /* Read neg results if dcbx is in the FW */ + if (bnx2x_dcbx_read_shmem_neg_results(bp)) + return; + + bnx2x_dump_dcbx_drv_param(bp, &bp->dcbx_local_feat, + bp->dcbx_error); + + bnx2x_get_dcbx_drv_param(bp, &bp->dcbx_local_feat, + bp->dcbx_error); + + /* mark DCBX result for PMF migration */ + bnx2x_update_drv_flags(bp, DRV_FLAGS_DCB_CONFIGURED, 1); +#ifdef BCM_DCBNL + /** + * Add new app tlvs to dcbnl + */ + bnx2x_dcbnl_update_applist(bp, false); +#endif + bnx2x_dcbx_stop_hw_tx(bp); + + /* reconfigure the netdevice with the results of the new + * dcbx negotiation. + */ + bnx2x_dcbx_update_tc_mapping(bp); + + return; + } + case BNX2X_DCBX_STATE_TX_PAUSED: + DP(NETIF_MSG_LINK, "BNX2X_DCBX_STATE_TX_PAUSED\n"); + bnx2x_pfc_set_pfc(bp); + + bnx2x_dcbx_update_ets_params(bp); + bnx2x_dcbx_resume_hw_tx(bp); + return; + case BNX2X_DCBX_STATE_TX_RELEASED: + DP(NETIF_MSG_LINK, "BNX2X_DCBX_STATE_TX_RELEASED\n"); + bnx2x_fw_command(bp, DRV_MSG_CODE_DCBX_PMF_DRV_OK, 0); +#ifdef BCM_DCBNL + /* + * Send a notification for the new negotiated parameters + */ + dcbnl_cee_notify(bp->dev, RTM_GETDCB, DCB_CMD_CEE_GET, 0, 0); +#endif + return; + default: + BNX2X_ERR("Unknown DCBX_STATE\n"); + } +} + +#define LLDP_ADMIN_MIB_OFFSET(bp) (PORT_MAX*sizeof(struct lldp_params) + \ + BP_PORT(bp)*sizeof(struct lldp_admin_mib)) + +static void bnx2x_dcbx_admin_mib_updated_params(struct bnx2x *bp, + u32 dcbx_lldp_params_offset) +{ + struct lldp_admin_mib admin_mib; + u32 i, other_traf_type = PREDEFINED_APP_IDX_MAX, traf_type = 0; + u32 offset = dcbx_lldp_params_offset + LLDP_ADMIN_MIB_OFFSET(bp); + + /*shortcuts*/ + struct dcbx_features *af = &admin_mib.features; + struct bnx2x_config_dcbx_params *dp = &bp->dcbx_config_params; + + memset(&admin_mib, 0, sizeof(struct lldp_admin_mib)); + + /* Read the data first */ + bnx2x_read_data(bp, (u32 *)&admin_mib, offset, + sizeof(struct lldp_admin_mib)); + + if (bp->dcbx_enabled == BNX2X_DCBX_ENABLED_ON_NEG_ON) + SET_FLAGS(admin_mib.ver_cfg_flags, DCBX_DCBX_ENABLED); + else + RESET_FLAGS(admin_mib.ver_cfg_flags, DCBX_DCBX_ENABLED); + + if (dp->overwrite_settings == BNX2X_DCBX_OVERWRITE_SETTINGS_ENABLE) { + + RESET_FLAGS(admin_mib.ver_cfg_flags, DCBX_CEE_VERSION_MASK); + admin_mib.ver_cfg_flags |= + (dp->admin_dcbx_version << DCBX_CEE_VERSION_SHIFT) & + DCBX_CEE_VERSION_MASK; + + af->ets.enabled = (u8)dp->admin_ets_enable; + + af->pfc.enabled = (u8)dp->admin_pfc_enable; + + /* FOR IEEE dp->admin_tc_supported_tx_enable */ + if (dp->admin_ets_configuration_tx_enable) + SET_FLAGS(admin_mib.ver_cfg_flags, + DCBX_ETS_CONFIG_TX_ENABLED); + else + RESET_FLAGS(admin_mib.ver_cfg_flags, + DCBX_ETS_CONFIG_TX_ENABLED); + /* For IEEE admin_ets_recommendation_tx_enable */ + if (dp->admin_pfc_tx_enable) + SET_FLAGS(admin_mib.ver_cfg_flags, + DCBX_PFC_CONFIG_TX_ENABLED); + else + RESET_FLAGS(admin_mib.ver_cfg_flags, + DCBX_PFC_CONFIG_TX_ENABLED); + + if (dp->admin_application_priority_tx_enable) + SET_FLAGS(admin_mib.ver_cfg_flags, + DCBX_APP_CONFIG_TX_ENABLED); + else + RESET_FLAGS(admin_mib.ver_cfg_flags, + DCBX_APP_CONFIG_TX_ENABLED); + + if (dp->admin_ets_willing) + SET_FLAGS(admin_mib.ver_cfg_flags, DCBX_ETS_WILLING); + else + RESET_FLAGS(admin_mib.ver_cfg_flags, DCBX_ETS_WILLING); + /* For IEEE admin_ets_reco_valid */ + if (dp->admin_pfc_willing) + SET_FLAGS(admin_mib.ver_cfg_flags, DCBX_PFC_WILLING); + else + RESET_FLAGS(admin_mib.ver_cfg_flags, DCBX_PFC_WILLING); + + if (dp->admin_app_priority_willing) + SET_FLAGS(admin_mib.ver_cfg_flags, DCBX_APP_WILLING); + else + RESET_FLAGS(admin_mib.ver_cfg_flags, DCBX_APP_WILLING); + + for (i = 0 ; i < DCBX_MAX_NUM_PG_BW_ENTRIES; i++) { + DCBX_PG_BW_SET(af->ets.pg_bw_tbl, i, + (u8)dp->admin_configuration_bw_precentage[i]); + + DP(NETIF_MSG_LINK, "pg_bw_tbl[%d] = %02x\n", + i, DCBX_PG_BW_GET(af->ets.pg_bw_tbl, i)); + } + + for (i = 0; i < DCBX_MAX_NUM_PRI_PG_ENTRIES; i++) { + DCBX_PRI_PG_SET(af->ets.pri_pg_tbl, i, + (u8)dp->admin_configuration_ets_pg[i]); + + DP(NETIF_MSG_LINK, "pri_pg_tbl[%d] = %02x\n", + i, DCBX_PRI_PG_GET(af->ets.pri_pg_tbl, i)); + } + + /*For IEEE admin_recommendation_bw_precentage + *For IEEE admin_recommendation_ets_pg */ + af->pfc.pri_en_bitmap = (u8)dp->admin_pfc_bitmap; + for (i = 0; i < 4; i++) { + if (dp->admin_priority_app_table[i].valid) { + struct bnx2x_admin_priority_app_table *table = + dp->admin_priority_app_table; + if ((ETH_TYPE_FCOE == table[i].app_id) && + (TRAFFIC_TYPE_ETH == table[i].traffic_type)) + traf_type = FCOE_APP_IDX; + else if ((TCP_PORT_ISCSI == table[i].app_id) && + (TRAFFIC_TYPE_PORT == table[i].traffic_type)) + traf_type = ISCSI_APP_IDX; + else + traf_type = other_traf_type++; + + af->app.app_pri_tbl[traf_type].app_id = + table[i].app_id; + + af->app.app_pri_tbl[traf_type].pri_bitmap = + (u8)(1 << table[i].priority); + + af->app.app_pri_tbl[traf_type].appBitfield = + (DCBX_APP_ENTRY_VALID); + + af->app.app_pri_tbl[traf_type].appBitfield |= + (TRAFFIC_TYPE_ETH == table[i].traffic_type) ? + DCBX_APP_SF_ETH_TYPE : DCBX_APP_SF_PORT; + } + } + + af->app.default_pri = (u8)dp->admin_default_priority; + + } + + /* Write the data. */ + bnx2x_write_data(bp, (u32 *)&admin_mib, offset, + sizeof(struct lldp_admin_mib)); + +} + +void bnx2x_dcbx_set_state(struct bnx2x *bp, bool dcb_on, u32 dcbx_enabled) +{ + if (!CHIP_IS_E1x(bp) && !CHIP_IS_E3(bp)) { + bp->dcb_state = dcb_on; + bp->dcbx_enabled = dcbx_enabled; + } else { + bp->dcb_state = false; + bp->dcbx_enabled = BNX2X_DCBX_ENABLED_INVALID; + } + DP(NETIF_MSG_LINK, "DCB state [%s:%s]\n", + dcb_on ? "ON" : "OFF", + dcbx_enabled == BNX2X_DCBX_ENABLED_OFF ? "user-mode" : + dcbx_enabled == BNX2X_DCBX_ENABLED_ON_NEG_OFF ? "on-chip static" : + dcbx_enabled == BNX2X_DCBX_ENABLED_ON_NEG_ON ? + "on-chip with negotiation" : "invalid"); +} + +void bnx2x_dcbx_init_params(struct bnx2x *bp) +{ + bp->dcbx_config_params.admin_dcbx_version = 0x0; /* 0 - CEE; 1 - IEEE */ + bp->dcbx_config_params.admin_ets_willing = 1; + bp->dcbx_config_params.admin_pfc_willing = 1; + bp->dcbx_config_params.overwrite_settings = 1; + bp->dcbx_config_params.admin_ets_enable = 1; + bp->dcbx_config_params.admin_pfc_enable = 1; + bp->dcbx_config_params.admin_tc_supported_tx_enable = 1; + bp->dcbx_config_params.admin_ets_configuration_tx_enable = 1; + bp->dcbx_config_params.admin_pfc_tx_enable = 1; + bp->dcbx_config_params.admin_application_priority_tx_enable = 1; + bp->dcbx_config_params.admin_ets_reco_valid = 1; + bp->dcbx_config_params.admin_app_priority_willing = 1; + bp->dcbx_config_params.admin_configuration_bw_precentage[0] = 00; + bp->dcbx_config_params.admin_configuration_bw_precentage[1] = 50; + bp->dcbx_config_params.admin_configuration_bw_precentage[2] = 50; + bp->dcbx_config_params.admin_configuration_bw_precentage[3] = 0; + bp->dcbx_config_params.admin_configuration_bw_precentage[4] = 0; + bp->dcbx_config_params.admin_configuration_bw_precentage[5] = 0; + bp->dcbx_config_params.admin_configuration_bw_precentage[6] = 0; + bp->dcbx_config_params.admin_configuration_bw_precentage[7] = 0; + bp->dcbx_config_params.admin_configuration_ets_pg[0] = 1; + bp->dcbx_config_params.admin_configuration_ets_pg[1] = 0; + bp->dcbx_config_params.admin_configuration_ets_pg[2] = 0; + bp->dcbx_config_params.admin_configuration_ets_pg[3] = 2; + bp->dcbx_config_params.admin_configuration_ets_pg[4] = 0; + bp->dcbx_config_params.admin_configuration_ets_pg[5] = 0; + bp->dcbx_config_params.admin_configuration_ets_pg[6] = 0; + bp->dcbx_config_params.admin_configuration_ets_pg[7] = 0; + bp->dcbx_config_params.admin_recommendation_bw_precentage[0] = 0; + bp->dcbx_config_params.admin_recommendation_bw_precentage[1] = 1; + bp->dcbx_config_params.admin_recommendation_bw_precentage[2] = 2; + bp->dcbx_config_params.admin_recommendation_bw_precentage[3] = 0; + bp->dcbx_config_params.admin_recommendation_bw_precentage[4] = 7; + bp->dcbx_config_params.admin_recommendation_bw_precentage[5] = 5; + bp->dcbx_config_params.admin_recommendation_bw_precentage[6] = 6; + bp->dcbx_config_params.admin_recommendation_bw_precentage[7] = 7; + bp->dcbx_config_params.admin_recommendation_ets_pg[0] = 0; + bp->dcbx_config_params.admin_recommendation_ets_pg[1] = 1; + bp->dcbx_config_params.admin_recommendation_ets_pg[2] = 2; + bp->dcbx_config_params.admin_recommendation_ets_pg[3] = 3; + bp->dcbx_config_params.admin_recommendation_ets_pg[4] = 4; + bp->dcbx_config_params.admin_recommendation_ets_pg[5] = 5; + bp->dcbx_config_params.admin_recommendation_ets_pg[6] = 6; + bp->dcbx_config_params.admin_recommendation_ets_pg[7] = 7; + bp->dcbx_config_params.admin_pfc_bitmap = 0x8; /* FCoE(3) enable */ + bp->dcbx_config_params.admin_priority_app_table[0].valid = 1; + bp->dcbx_config_params.admin_priority_app_table[1].valid = 1; + bp->dcbx_config_params.admin_priority_app_table[2].valid = 0; + bp->dcbx_config_params.admin_priority_app_table[3].valid = 0; + bp->dcbx_config_params.admin_priority_app_table[0].priority = 3; + bp->dcbx_config_params.admin_priority_app_table[1].priority = 0; + bp->dcbx_config_params.admin_priority_app_table[2].priority = 0; + bp->dcbx_config_params.admin_priority_app_table[3].priority = 0; + bp->dcbx_config_params.admin_priority_app_table[0].traffic_type = 0; + bp->dcbx_config_params.admin_priority_app_table[1].traffic_type = 1; + bp->dcbx_config_params.admin_priority_app_table[2].traffic_type = 0; + bp->dcbx_config_params.admin_priority_app_table[3].traffic_type = 0; + bp->dcbx_config_params.admin_priority_app_table[0].app_id = 0x8906; + bp->dcbx_config_params.admin_priority_app_table[1].app_id = 3260; + bp->dcbx_config_params.admin_priority_app_table[2].app_id = 0; + bp->dcbx_config_params.admin_priority_app_table[3].app_id = 0; + bp->dcbx_config_params.admin_default_priority = + bp->dcbx_config_params.admin_priority_app_table[1].priority; +} + +void bnx2x_dcbx_init(struct bnx2x *bp) +{ + u32 dcbx_lldp_params_offset = SHMEM_LLDP_DCBX_PARAMS_NONE; + + if (bp->dcbx_enabled <= 0) + return; + + /* validate: + * chip of good for dcbx version, + * dcb is wanted + * the function is pmf + * shmem2 contains DCBX support fields + */ + DP(NETIF_MSG_LINK, "dcb_state %d bp->port.pmf %d\n", + bp->dcb_state, bp->port.pmf); + + if (bp->dcb_state == BNX2X_DCB_STATE_ON && bp->port.pmf && + SHMEM2_HAS(bp, dcbx_lldp_params_offset)) { + dcbx_lldp_params_offset = + SHMEM2_RD(bp, dcbx_lldp_params_offset); + + DP(NETIF_MSG_LINK, "dcbx_lldp_params_offset 0x%x\n", + dcbx_lldp_params_offset); + + bnx2x_update_drv_flags(bp, DRV_FLAGS_DCB_CONFIGURED, 0); + + if (SHMEM_LLDP_DCBX_PARAMS_NONE != dcbx_lldp_params_offset) { + bnx2x_dcbx_admin_mib_updated_params(bp, + dcbx_lldp_params_offset); + + /* Let HW start negotiation */ + bnx2x_fw_command(bp, + DRV_MSG_CODE_DCBX_ADMIN_PMF_MSG, 0); + } + } +} +static void +bnx2x_dcbx_print_cos_params(struct bnx2x *bp, + struct bnx2x_func_tx_start_params *pfc_fw_cfg) +{ + u8 pri = 0; + u8 cos = 0; + + DP(NETIF_MSG_LINK, + "pfc_fw_cfg->dcb_version %x\n", pfc_fw_cfg->dcb_version); + DP(NETIF_MSG_LINK, + "pdev->params.dcbx_port_params.pfc." + "priority_non_pauseable_mask %x\n", + bp->dcbx_port_params.pfc.priority_non_pauseable_mask); + + for (cos = 0 ; cos < bp->dcbx_port_params.ets.num_of_cos ; cos++) { + DP(NETIF_MSG_LINK, "pdev->params.dcbx_port_params.ets." + "cos_params[%d].pri_bitmask %x\n", cos, + bp->dcbx_port_params.ets.cos_params[cos].pri_bitmask); + + DP(NETIF_MSG_LINK, "pdev->params.dcbx_port_params.ets." + "cos_params[%d].bw_tbl %x\n", cos, + bp->dcbx_port_params.ets.cos_params[cos].bw_tbl); + + DP(NETIF_MSG_LINK, "pdev->params.dcbx_port_params.ets." + "cos_params[%d].strict %x\n", cos, + bp->dcbx_port_params.ets.cos_params[cos].strict); + + DP(NETIF_MSG_LINK, "pdev->params.dcbx_port_params.ets." + "cos_params[%d].pauseable %x\n", cos, + bp->dcbx_port_params.ets.cos_params[cos].pauseable); + } + + for (pri = 0; pri < LLFC_DRIVER_TRAFFIC_TYPE_MAX; pri++) { + DP(NETIF_MSG_LINK, + "pfc_fw_cfg->traffic_type_to_priority_cos[%d]." + "priority %x\n", pri, + pfc_fw_cfg->traffic_type_to_priority_cos[pri].priority); + + DP(NETIF_MSG_LINK, + "pfc_fw_cfg->traffic_type_to_priority_cos[%d].cos %x\n", + pri, pfc_fw_cfg->traffic_type_to_priority_cos[pri].cos); + } +} + +/* fills help_data according to pg_info */ +static void bnx2x_dcbx_get_num_pg_traf_type(struct bnx2x *bp, + u32 *pg_pri_orginal_spread, + struct pg_help_data *help_data) +{ + bool pg_found = false; + u32 i, traf_type, add_traf_type, add_pg; + u32 *ttp = bp->dcbx_port_params.app.traffic_type_priority; + struct pg_entry_help_data *data = help_data->data; /*shotcut*/ + + /* Set to invalid */ + for (i = 0; i < LLFC_DRIVER_TRAFFIC_TYPE_MAX; i++) + data[i].pg = DCBX_ILLEGAL_PG; + + for (add_traf_type = 0; + add_traf_type < LLFC_DRIVER_TRAFFIC_TYPE_MAX; add_traf_type++) { + pg_found = false; + if (ttp[add_traf_type] < MAX_PFC_PRIORITIES) { + add_pg = (u8)pg_pri_orginal_spread[ttp[add_traf_type]]; + for (traf_type = 0; + traf_type < LLFC_DRIVER_TRAFFIC_TYPE_MAX; + traf_type++) { + if (data[traf_type].pg == add_pg) { + if (!(data[traf_type].pg_priority & + (1 << ttp[add_traf_type]))) + data[traf_type]. + num_of_dif_pri++; + data[traf_type].pg_priority |= + (1 << ttp[add_traf_type]); + pg_found = true; + break; + } + } + if (false == pg_found) { + data[help_data->num_of_pg].pg = add_pg; + data[help_data->num_of_pg].pg_priority = + (1 << ttp[add_traf_type]); + data[help_data->num_of_pg].num_of_dif_pri = 1; + help_data->num_of_pg++; + } + } + DP(NETIF_MSG_LINK, + "add_traf_type %d pg_found %s num_of_pg %d\n", + add_traf_type, (false == pg_found) ? "NO" : "YES", + help_data->num_of_pg); + } +} + +static void bnx2x_dcbx_ets_disabled_entry_data(struct bnx2x *bp, + struct cos_help_data *cos_data, + u32 pri_join_mask) +{ + /* Only one priority than only one COS */ + cos_data->data[0].pausable = + IS_DCBX_PFC_PRI_ONLY_PAUSE(bp, pri_join_mask); + cos_data->data[0].pri_join_mask = pri_join_mask; + cos_data->data[0].cos_bw = 100; + cos_data->num_of_cos = 1; +} + +static inline void bnx2x_dcbx_add_to_cos_bw(struct bnx2x *bp, + struct cos_entry_help_data *data, + u8 pg_bw) +{ + if (data->cos_bw == DCBX_INVALID_COS_BW) + data->cos_bw = pg_bw; + else + data->cos_bw += pg_bw; +} + +static void bnx2x_dcbx_separate_pauseable_from_non(struct bnx2x *bp, + struct cos_help_data *cos_data, + u32 *pg_pri_orginal_spread, + struct dcbx_ets_feature *ets) +{ + u32 pri_tested = 0; + u8 i = 0; + u8 entry = 0; + u8 pg_entry = 0; + u8 num_of_pri = LLFC_DRIVER_TRAFFIC_TYPE_MAX; + + cos_data->data[0].pausable = true; + cos_data->data[1].pausable = false; + cos_data->data[0].pri_join_mask = cos_data->data[1].pri_join_mask = 0; + + for (i = 0 ; i < num_of_pri ; i++) { + pri_tested = 1 << bp->dcbx_port_params. + app.traffic_type_priority[i]; + + if (pri_tested & DCBX_PFC_PRI_NON_PAUSE_MASK(bp)) { + cos_data->data[1].pri_join_mask |= pri_tested; + entry = 1; + } else { + cos_data->data[0].pri_join_mask |= pri_tested; + entry = 0; + } + pg_entry = (u8)pg_pri_orginal_spread[bp->dcbx_port_params. + app.traffic_type_priority[i]]; + /* There can be only one strict pg */ + if (pg_entry < DCBX_MAX_NUM_PG_BW_ENTRIES) + bnx2x_dcbx_add_to_cos_bw(bp, &cos_data->data[entry], + DCBX_PG_BW_GET(ets->pg_bw_tbl, pg_entry)); + else + /* If we join a group and one is strict + * than the bw rulls */ + cos_data->data[entry].strict = + BNX2X_DCBX_STRICT_COS_HIGHEST; + } + if ((0 == cos_data->data[0].pri_join_mask) && + (0 == cos_data->data[1].pri_join_mask)) + BNX2X_ERR("dcbx error: Both groups must have priorities\n"); +} + + +#ifndef POWER_OF_2 +#define POWER_OF_2(x) ((0 != x) && (0 == (x & (x-1)))) +#endif + +static void bnx2x_dcbx_2cos_limit_cee_single_pg_to_cos_params(struct bnx2x *bp, + struct pg_help_data *pg_help_data, + struct cos_help_data *cos_data, + u32 pri_join_mask, + u8 num_of_dif_pri) +{ + u8 i = 0; + u32 pri_tested = 0; + u32 pri_mask_without_pri = 0; + u32 *ttp = bp->dcbx_port_params.app.traffic_type_priority; + /*debug*/ + if (num_of_dif_pri == 1) { + bnx2x_dcbx_ets_disabled_entry_data(bp, cos_data, pri_join_mask); + return; + } + /* single priority group */ + if (pg_help_data->data[0].pg < DCBX_MAX_NUM_PG_BW_ENTRIES) { + /* If there are both pauseable and non-pauseable priorities, + * the pauseable priorities go to the first queue and + * the non-pauseable priorities go to the second queue. + */ + if (IS_DCBX_PFC_PRI_MIX_PAUSE(bp, pri_join_mask)) { + /* Pauseable */ + cos_data->data[0].pausable = true; + /* Non pauseable.*/ + cos_data->data[1].pausable = false; + + if (2 == num_of_dif_pri) { + cos_data->data[0].cos_bw = 50; + cos_data->data[1].cos_bw = 50; + } + + if (3 == num_of_dif_pri) { + if (POWER_OF_2(DCBX_PFC_PRI_GET_PAUSE(bp, + pri_join_mask))) { + cos_data->data[0].cos_bw = 33; + cos_data->data[1].cos_bw = 67; + } else { + cos_data->data[0].cos_bw = 67; + cos_data->data[1].cos_bw = 33; + } + } + + } else if (IS_DCBX_PFC_PRI_ONLY_PAUSE(bp, pri_join_mask)) { + /* If there are only pauseable priorities, + * then one/two priorities go to the first queue + * and one priority goes to the second queue. + */ + if (2 == num_of_dif_pri) { + cos_data->data[0].cos_bw = 50; + cos_data->data[1].cos_bw = 50; + } else { + cos_data->data[0].cos_bw = 67; + cos_data->data[1].cos_bw = 33; + } + cos_data->data[1].pausable = true; + cos_data->data[0].pausable = true; + /* All priorities except FCOE */ + cos_data->data[0].pri_join_mask = (pri_join_mask & + ((u8)~(1 << ttp[LLFC_TRAFFIC_TYPE_FCOE]))); + /* Only FCOE priority.*/ + cos_data->data[1].pri_join_mask = + (1 << ttp[LLFC_TRAFFIC_TYPE_FCOE]); + } else + /* If there are only non-pauseable priorities, + * they will all go to the same queue. + */ + bnx2x_dcbx_ets_disabled_entry_data(bp, + cos_data, pri_join_mask); + } else { + /* priority group which is not BW limited (PG#15):*/ + if (IS_DCBX_PFC_PRI_MIX_PAUSE(bp, pri_join_mask)) { + /* If there are both pauseable and non-pauseable + * priorities, the pauseable priorities go to the first + * queue and the non-pauseable priorities + * go to the second queue. + */ + if (DCBX_PFC_PRI_GET_PAUSE(bp, pri_join_mask) > + DCBX_PFC_PRI_GET_NON_PAUSE(bp, pri_join_mask)) { + cos_data->data[0].strict = + BNX2X_DCBX_STRICT_COS_HIGHEST; + cos_data->data[1].strict = + BNX2X_DCBX_STRICT_COS_NEXT_LOWER_PRI( + BNX2X_DCBX_STRICT_COS_HIGHEST); + } else { + cos_data->data[0].strict = + BNX2X_DCBX_STRICT_COS_NEXT_LOWER_PRI( + BNX2X_DCBX_STRICT_COS_HIGHEST); + cos_data->data[1].strict = + BNX2X_DCBX_STRICT_COS_HIGHEST; + } + /* Pauseable */ + cos_data->data[0].pausable = true; + /* Non pause-able.*/ + cos_data->data[1].pausable = false; + } else { + /* If there are only pauseable priorities or + * only non-pauseable,* the lower priorities go + * to the first queue and the higherpriorities go + * to the second queue. + */ + cos_data->data[0].pausable = + cos_data->data[1].pausable = + IS_DCBX_PFC_PRI_ONLY_PAUSE(bp, pri_join_mask); + + for (i = 0 ; i < LLFC_DRIVER_TRAFFIC_TYPE_MAX; i++) { + pri_tested = 1 << bp->dcbx_port_params. + app.traffic_type_priority[i]; + /* Remove priority tested */ + pri_mask_without_pri = + (pri_join_mask & ((u8)(~pri_tested))); + if (pri_mask_without_pri < pri_tested) + break; + } + + if (i == LLFC_DRIVER_TRAFFIC_TYPE_MAX) + BNX2X_ERR("Invalid value for pri_join_mask -" + " could not find a priority\n"); + + cos_data->data[0].pri_join_mask = pri_mask_without_pri; + cos_data->data[1].pri_join_mask = pri_tested; + /* Both queues are strict priority, + * and that with the highest priority + * gets the highest strict priority in the arbiter. + */ + cos_data->data[0].strict = + BNX2X_DCBX_STRICT_COS_NEXT_LOWER_PRI( + BNX2X_DCBX_STRICT_COS_HIGHEST); + cos_data->data[1].strict = + BNX2X_DCBX_STRICT_COS_HIGHEST; + } + } +} + +static void bnx2x_dcbx_2cos_limit_cee_two_pg_to_cos_params( + struct bnx2x *bp, + struct pg_help_data *pg_help_data, + struct dcbx_ets_feature *ets, + struct cos_help_data *cos_data, + u32 *pg_pri_orginal_spread, + u32 pri_join_mask, + u8 num_of_dif_pri) +{ + u8 i = 0; + u8 pg[DCBX_COS_MAX_NUM_E2] = { 0 }; + + /* If there are both pauseable and non-pauseable priorities, + * the pauseable priorities go to the first queue and + * the non-pauseable priorities go to the second queue. + */ + if (IS_DCBX_PFC_PRI_MIX_PAUSE(bp, pri_join_mask)) { + if (IS_DCBX_PFC_PRI_MIX_PAUSE(bp, + pg_help_data->data[0].pg_priority) || + IS_DCBX_PFC_PRI_MIX_PAUSE(bp, + pg_help_data->data[1].pg_priority)) { + /* If one PG contains both pauseable and + * non-pauseable priorities then ETS is disabled. + */ + bnx2x_dcbx_separate_pauseable_from_non(bp, cos_data, + pg_pri_orginal_spread, ets); + bp->dcbx_port_params.ets.enabled = false; + return; + } + + /* Pauseable */ + cos_data->data[0].pausable = true; + /* Non pauseable. */ + cos_data->data[1].pausable = false; + if (IS_DCBX_PFC_PRI_ONLY_PAUSE(bp, + pg_help_data->data[0].pg_priority)) { + /* 0 is pauseable */ + cos_data->data[0].pri_join_mask = + pg_help_data->data[0].pg_priority; + pg[0] = pg_help_data->data[0].pg; + cos_data->data[1].pri_join_mask = + pg_help_data->data[1].pg_priority; + pg[1] = pg_help_data->data[1].pg; + } else {/* 1 is pauseable */ + cos_data->data[0].pri_join_mask = + pg_help_data->data[1].pg_priority; + pg[0] = pg_help_data->data[1].pg; + cos_data->data[1].pri_join_mask = + pg_help_data->data[0].pg_priority; + pg[1] = pg_help_data->data[0].pg; + } + } else { + /* If there are only pauseable priorities or + * only non-pauseable, each PG goes to a queue. + */ + cos_data->data[0].pausable = cos_data->data[1].pausable = + IS_DCBX_PFC_PRI_ONLY_PAUSE(bp, pri_join_mask); + cos_data->data[0].pri_join_mask = + pg_help_data->data[0].pg_priority; + pg[0] = pg_help_data->data[0].pg; + cos_data->data[1].pri_join_mask = + pg_help_data->data[1].pg_priority; + pg[1] = pg_help_data->data[1].pg; + } + + /* There can be only one strict pg */ + for (i = 0 ; i < ARRAY_SIZE(pg); i++) { + if (pg[i] < DCBX_MAX_NUM_PG_BW_ENTRIES) + cos_data->data[i].cos_bw = + DCBX_PG_BW_GET(ets->pg_bw_tbl, pg[i]); + else + cos_data->data[i].strict = + BNX2X_DCBX_STRICT_COS_HIGHEST; + } +} + +static int bnx2x_dcbx_join_pgs( + struct bnx2x *bp, + struct dcbx_ets_feature *ets, + struct pg_help_data *pg_help_data, + u8 required_num_of_pg) +{ + u8 entry_joined = pg_help_data->num_of_pg - 1; + u8 entry_removed = entry_joined + 1; + u8 pg_joined = 0; + + if (required_num_of_pg == 0 || ARRAY_SIZE(pg_help_data->data) + <= pg_help_data->num_of_pg) { + + BNX2X_ERR("required_num_of_pg can't be zero\n"); + return -EINVAL; + } + + while (required_num_of_pg < pg_help_data->num_of_pg) { + entry_joined = pg_help_data->num_of_pg - 2; + entry_removed = entry_joined + 1; + /* protect index */ + entry_removed %= ARRAY_SIZE(pg_help_data->data); + + pg_help_data->data[entry_joined].pg_priority |= + pg_help_data->data[entry_removed].pg_priority; + + pg_help_data->data[entry_joined].num_of_dif_pri += + pg_help_data->data[entry_removed].num_of_dif_pri; + + if (pg_help_data->data[entry_joined].pg == DCBX_STRICT_PRI_PG || + pg_help_data->data[entry_removed].pg == DCBX_STRICT_PRI_PG) + /* Entries joined strict priority rules */ + pg_help_data->data[entry_joined].pg = + DCBX_STRICT_PRI_PG; + else { + /* Entries can be joined join BW */ + pg_joined = DCBX_PG_BW_GET(ets->pg_bw_tbl, + pg_help_data->data[entry_joined].pg) + + DCBX_PG_BW_GET(ets->pg_bw_tbl, + pg_help_data->data[entry_removed].pg); + + DCBX_PG_BW_SET(ets->pg_bw_tbl, + pg_help_data->data[entry_joined].pg, pg_joined); + } + /* Joined the entries */ + pg_help_data->num_of_pg--; + } + + return 0; +} + +static void bnx2x_dcbx_2cos_limit_cee_three_pg_to_cos_params( + struct bnx2x *bp, + struct pg_help_data *pg_help_data, + struct dcbx_ets_feature *ets, + struct cos_help_data *cos_data, + u32 *pg_pri_orginal_spread, + u32 pri_join_mask, + u8 num_of_dif_pri) +{ + u8 i = 0; + u32 pri_tested = 0; + u8 entry = 0; + u8 pg_entry = 0; + bool b_found_strict = false; + u8 num_of_pri = LLFC_DRIVER_TRAFFIC_TYPE_MAX; + + cos_data->data[0].pri_join_mask = cos_data->data[1].pri_join_mask = 0; + /* If there are both pauseable and non-pauseable priorities, + * the pauseable priorities go to the first queue and the + * non-pauseable priorities go to the second queue. + */ + if (IS_DCBX_PFC_PRI_MIX_PAUSE(bp, pri_join_mask)) + bnx2x_dcbx_separate_pauseable_from_non(bp, + cos_data, pg_pri_orginal_spread, ets); + else { + /* If two BW-limited PG-s were combined to one queue, + * the BW is their sum. + * + * If there are only pauseable priorities or only non-pauseable, + * and there are both BW-limited and non-BW-limited PG-s, + * the BW-limited PG/s go to one queue and the non-BW-limited + * PG/s go to the second queue. + * + * If there are only pauseable priorities or only non-pauseable + * and all are BW limited, then two priorities go to the first + * queue and one priority goes to the second queue. + * + * We will join this two cases: + * if one is BW limited it will go to the secoend queue + * otherwise the last priority will get it + */ + + cos_data->data[0].pausable = cos_data->data[1].pausable = + IS_DCBX_PFC_PRI_ONLY_PAUSE(bp, pri_join_mask); + + for (i = 0 ; i < num_of_pri; i++) { + pri_tested = 1 << bp->dcbx_port_params. + app.traffic_type_priority[i]; + pg_entry = (u8)pg_pri_orginal_spread[bp-> + dcbx_port_params.app.traffic_type_priority[i]]; + + if (pg_entry < DCBX_MAX_NUM_PG_BW_ENTRIES) { + entry = 0; + + if (i == (num_of_pri-1) && + false == b_found_strict) + /* last entry will be handled separately + * If no priority is strict than last + * enty goes to last queue.*/ + entry = 1; + cos_data->data[entry].pri_join_mask |= + pri_tested; + bnx2x_dcbx_add_to_cos_bw(bp, + &cos_data->data[entry], + DCBX_PG_BW_GET(ets->pg_bw_tbl, + pg_entry)); + } else { + b_found_strict = true; + cos_data->data[1].pri_join_mask |= pri_tested; + /* If we join a group and one is strict + * than the bw rulls */ + cos_data->data[1].strict = + BNX2X_DCBX_STRICT_COS_HIGHEST; + } + } + } +} + + +static void bnx2x_dcbx_2cos_limit_cee_fill_cos_params(struct bnx2x *bp, + struct pg_help_data *help_data, + struct dcbx_ets_feature *ets, + struct cos_help_data *cos_data, + u32 *pg_pri_orginal_spread, + u32 pri_join_mask, + u8 num_of_dif_pri) +{ + + /* default E2 settings */ + cos_data->num_of_cos = DCBX_COS_MAX_NUM_E2; + + switch (help_data->num_of_pg) { + case 1: + bnx2x_dcbx_2cos_limit_cee_single_pg_to_cos_params( + bp, + help_data, + cos_data, + pri_join_mask, + num_of_dif_pri); + break; + case 2: + bnx2x_dcbx_2cos_limit_cee_two_pg_to_cos_params( + bp, + help_data, + ets, + cos_data, + pg_pri_orginal_spread, + pri_join_mask, + num_of_dif_pri); + break; + + case 3: + bnx2x_dcbx_2cos_limit_cee_three_pg_to_cos_params( + bp, + help_data, + ets, + cos_data, + pg_pri_orginal_spread, + pri_join_mask, + num_of_dif_pri); + break; + default: + BNX2X_ERR("Wrong pg_help_data.num_of_pg\n"); + bnx2x_dcbx_ets_disabled_entry_data(bp, + cos_data, pri_join_mask); + } +} + +static int bnx2x_dcbx_spread_strict_pri(struct bnx2x *bp, + struct cos_help_data *cos_data, + u8 entry, + u8 num_spread_of_entries, + u8 strict_app_pris) +{ + u8 strict_pri = BNX2X_DCBX_STRICT_COS_HIGHEST; + u8 num_of_app_pri = MAX_PFC_PRIORITIES; + u8 app_pri_bit = 0; + + while (num_spread_of_entries && num_of_app_pri > 0) { + app_pri_bit = 1 << (num_of_app_pri - 1); + if (app_pri_bit & strict_app_pris) { + struct cos_entry_help_data *data = &cos_data-> + data[entry]; + num_spread_of_entries--; + if (num_spread_of_entries == 0) { + /* last entry needed put all the entries left */ + data->cos_bw = DCBX_INVALID_COS_BW; + data->strict = strict_pri; + data->pri_join_mask = strict_app_pris; + data->pausable = DCBX_IS_PFC_PRI_SOME_PAUSE(bp, + data->pri_join_mask); + } else { + strict_app_pris &= ~app_pri_bit; + + data->cos_bw = DCBX_INVALID_COS_BW; + data->strict = strict_pri; + data->pri_join_mask = app_pri_bit; + data->pausable = DCBX_IS_PFC_PRI_SOME_PAUSE(bp, + data->pri_join_mask); + } + + strict_pri = + BNX2X_DCBX_STRICT_COS_NEXT_LOWER_PRI(strict_pri); + entry++; + } + + num_of_app_pri--; + } + + if (num_spread_of_entries) + return -EINVAL; + + return 0; +} + +static u8 bnx2x_dcbx_cee_fill_strict_pri(struct bnx2x *bp, + struct cos_help_data *cos_data, + u8 entry, + u8 num_spread_of_entries, + u8 strict_app_pris) +{ + + if (bnx2x_dcbx_spread_strict_pri(bp, cos_data, entry, + num_spread_of_entries, + strict_app_pris)) { + struct cos_entry_help_data *data = &cos_data-> + data[entry]; + /* Fill BW entry */ + data->cos_bw = DCBX_INVALID_COS_BW; + data->strict = BNX2X_DCBX_STRICT_COS_HIGHEST; + data->pri_join_mask = strict_app_pris; + data->pausable = DCBX_IS_PFC_PRI_SOME_PAUSE(bp, + data->pri_join_mask); + return 1; + } + + return num_spread_of_entries; +} + +static void bnx2x_dcbx_cee_fill_cos_params(struct bnx2x *bp, + struct pg_help_data *help_data, + struct dcbx_ets_feature *ets, + struct cos_help_data *cos_data, + u32 pri_join_mask) + +{ + u8 need_num_of_entries = 0; + u8 i = 0; + u8 entry = 0; + + /* + * if the number of requested PG-s in CEE is greater than 3 + * then the results are not determined since this is a violation + * of the standard. + */ + if (help_data->num_of_pg > DCBX_COS_MAX_NUM_E3B0) { + if (bnx2x_dcbx_join_pgs(bp, ets, help_data, + DCBX_COS_MAX_NUM_E3B0)) { + BNX2X_ERR("Unable to reduce the number of PGs -" + "we will disables ETS\n"); + bnx2x_dcbx_ets_disabled_entry_data(bp, cos_data, + pri_join_mask); + return; + } + } + + for (i = 0 ; i < help_data->num_of_pg; i++) { + struct pg_entry_help_data *pg = &help_data->data[i]; + if (pg->pg < DCBX_MAX_NUM_PG_BW_ENTRIES) { + struct cos_entry_help_data *data = &cos_data-> + data[entry]; + /* Fill BW entry */ + data->cos_bw = DCBX_PG_BW_GET(ets->pg_bw_tbl, pg->pg); + data->strict = BNX2X_DCBX_STRICT_INVALID; + data->pri_join_mask = pg->pg_priority; + data->pausable = DCBX_IS_PFC_PRI_SOME_PAUSE(bp, + data->pri_join_mask); + + entry++; + } else { + need_num_of_entries = min_t(u8, + (u8)pg->num_of_dif_pri, + (u8)DCBX_COS_MAX_NUM_E3B0 - + help_data->num_of_pg + 1); + /* + * If there are still VOQ-s which have no associated PG, + * then associate these VOQ-s to PG15. These PG-s will + * be used for SP between priorities on PG15. + */ + entry += bnx2x_dcbx_cee_fill_strict_pri(bp, cos_data, + entry, need_num_of_entries, pg->pg_priority); + } + } + + /* the entry will represent the number of COSes used */ + cos_data->num_of_cos = entry; +} +static void bnx2x_dcbx_fill_cos_params(struct bnx2x *bp, + struct pg_help_data *help_data, + struct dcbx_ets_feature *ets, + u32 *pg_pri_orginal_spread) +{ + struct cos_help_data cos_data; + u8 i = 0; + u32 pri_join_mask = 0; + u8 num_of_dif_pri = 0; + + memset(&cos_data, 0, sizeof(cos_data)); + + /* Validate the pg value */ + for (i = 0; i < help_data->num_of_pg ; i++) { + if (DCBX_STRICT_PRIORITY != help_data->data[i].pg && + DCBX_MAX_NUM_PG_BW_ENTRIES <= help_data->data[i].pg) + BNX2X_ERR("Invalid pg[%d] data %x\n", i, + help_data->data[i].pg); + pri_join_mask |= help_data->data[i].pg_priority; + num_of_dif_pri += help_data->data[i].num_of_dif_pri; + } + + /* defaults */ + cos_data.num_of_cos = 1; + for (i = 0; i < ARRAY_SIZE(cos_data.data); i++) { + cos_data.data[i].pri_join_mask = 0; + cos_data.data[i].pausable = false; + cos_data.data[i].strict = BNX2X_DCBX_STRICT_INVALID; + cos_data.data[i].cos_bw = DCBX_INVALID_COS_BW; + } + + if (CHIP_IS_E3B0(bp)) + bnx2x_dcbx_cee_fill_cos_params(bp, help_data, ets, + &cos_data, pri_join_mask); + else /* E2 + E3A0 */ + bnx2x_dcbx_2cos_limit_cee_fill_cos_params(bp, + help_data, ets, + &cos_data, + pg_pri_orginal_spread, + pri_join_mask, + num_of_dif_pri); + + for (i = 0; i < cos_data.num_of_cos ; i++) { + struct bnx2x_dcbx_cos_params *p = + &bp->dcbx_port_params.ets.cos_params[i]; + + p->strict = cos_data.data[i].strict; + p->bw_tbl = cos_data.data[i].cos_bw; + p->pri_bitmask = cos_data.data[i].pri_join_mask; + p->pauseable = cos_data.data[i].pausable; + + /* sanity */ + if (p->bw_tbl != DCBX_INVALID_COS_BW || + p->strict != BNX2X_DCBX_STRICT_INVALID) { + if (p->pri_bitmask == 0) + BNX2X_ERR("Invalid pri_bitmask for %d\n", i); + + if (CHIP_IS_E2(bp) || CHIP_IS_E3A0(bp)) { + + if (p->pauseable && + DCBX_PFC_PRI_GET_NON_PAUSE(bp, + p->pri_bitmask) != 0) + BNX2X_ERR("Inconsistent config for " + "pausable COS %d\n", i); + + if (!p->pauseable && + DCBX_PFC_PRI_GET_PAUSE(bp, + p->pri_bitmask) != 0) + BNX2X_ERR("Inconsistent config for " + "nonpausable COS %d\n", i); + } + } + + if (p->pauseable) + DP(NETIF_MSG_LINK, "COS %d PAUSABLE prijoinmask 0x%x\n", + i, cos_data.data[i].pri_join_mask); + else + DP(NETIF_MSG_LINK, "COS %d NONPAUSABLE prijoinmask " + "0x%x\n", + i, cos_data.data[i].pri_join_mask); + } + + bp->dcbx_port_params.ets.num_of_cos = cos_data.num_of_cos ; +} + +static void bnx2x_dcbx_get_ets_pri_pg_tbl(struct bnx2x *bp, + u32 *set_configuration_ets_pg, + u32 *pri_pg_tbl) +{ + int i; + + for (i = 0; i < DCBX_MAX_NUM_PRI_PG_ENTRIES; i++) { + set_configuration_ets_pg[i] = DCBX_PRI_PG_GET(pri_pg_tbl, i); + + DP(NETIF_MSG_LINK, "set_configuration_ets_pg[%d] = 0x%x\n", + i, set_configuration_ets_pg[i]); + } +} + +static void bnx2x_dcbx_fw_struct(struct bnx2x *bp, + struct bnx2x_func_tx_start_params *pfc_fw_cfg) +{ + u16 pri_bit = 0; + u8 cos = 0, pri = 0; + struct priority_cos *tt2cos; + u32 *ttp = bp->dcbx_port_params.app.traffic_type_priority; + + memset(pfc_fw_cfg, 0, sizeof(*pfc_fw_cfg)); + + /* to disable DCB - the structure must be zeroed */ + if (bp->dcbx_error & DCBX_REMOTE_MIB_ERROR) + return; + + /*shortcut*/ + tt2cos = pfc_fw_cfg->traffic_type_to_priority_cos; + + /* Fw version should be incremented each update */ + pfc_fw_cfg->dcb_version = ++bp->dcb_version; + pfc_fw_cfg->dcb_enabled = 1; + + /* Fill priority parameters */ + for (pri = 0; pri < LLFC_DRIVER_TRAFFIC_TYPE_MAX; pri++) { + tt2cos[pri].priority = ttp[pri]; + pri_bit = 1 << tt2cos[pri].priority; + + /* Fill COS parameters based on COS calculated to + * make it more general for future use */ + for (cos = 0; cos < bp->dcbx_port_params.ets.num_of_cos; cos++) + if (bp->dcbx_port_params.ets.cos_params[cos]. + pri_bitmask & pri_bit) + tt2cos[pri].cos = cos; + } + + /* we never want the FW to add a 0 vlan tag */ + pfc_fw_cfg->dont_add_pri_0_en = 1; + + bnx2x_dcbx_print_cos_params(bp, pfc_fw_cfg); +} + +void bnx2x_dcbx_pmf_update(struct bnx2x *bp) +{ + /* if we need to syncronize DCBX result from prev PMF + * read it from shmem and update bp accordingly + */ + if (SHMEM2_HAS(bp, drv_flags) && + GET_FLAGS(SHMEM2_RD(bp, drv_flags), DRV_FLAGS_DCB_CONFIGURED)) { + /* Read neg results if dcbx is in the FW */ + if (bnx2x_dcbx_read_shmem_neg_results(bp)) + return; + + bnx2x_dump_dcbx_drv_param(bp, &bp->dcbx_local_feat, + bp->dcbx_error); + bnx2x_get_dcbx_drv_param(bp, &bp->dcbx_local_feat, + bp->dcbx_error); + } +} + +/* DCB netlink */ +#ifdef BCM_DCBNL + +#define BNX2X_DCBX_CAPS (DCB_CAP_DCBX_LLD_MANAGED | \ + DCB_CAP_DCBX_VER_CEE | DCB_CAP_DCBX_STATIC) + +static inline bool bnx2x_dcbnl_set_valid(struct bnx2x *bp) +{ + /* validate dcbnl call that may change HW state: + * DCB is on and DCBX mode was SUCCESSFULLY set by the user. + */ + return bp->dcb_state && bp->dcbx_mode_uset; +} + +static u8 bnx2x_dcbnl_get_state(struct net_device *netdev) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(NETIF_MSG_LINK, "state = %d\n", bp->dcb_state); + return bp->dcb_state; +} + +static u8 bnx2x_dcbnl_set_state(struct net_device *netdev, u8 state) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(NETIF_MSG_LINK, "state = %s\n", state ? "on" : "off"); + + bnx2x_dcbx_set_state(bp, (state ? true : false), bp->dcbx_enabled); + return 0; +} + +static void bnx2x_dcbnl_get_perm_hw_addr(struct net_device *netdev, + u8 *perm_addr) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(NETIF_MSG_LINK, "GET-PERM-ADDR\n"); + + /* first the HW mac address */ + memcpy(perm_addr, netdev->dev_addr, netdev->addr_len); + +#ifdef BCM_CNIC + /* second SAN address */ + memcpy(perm_addr+netdev->addr_len, bp->fip_mac, netdev->addr_len); +#endif +} + +static void bnx2x_dcbnl_set_pg_tccfg_tx(struct net_device *netdev, int prio, + u8 prio_type, u8 pgid, u8 bw_pct, + u8 up_map) +{ + struct bnx2x *bp = netdev_priv(netdev); + + DP(NETIF_MSG_LINK, "prio[%d] = %d\n", prio, pgid); + if (!bnx2x_dcbnl_set_valid(bp) || prio >= DCBX_MAX_NUM_PRI_PG_ENTRIES) + return; + + /** + * bw_pct ingnored - band-width percentage devision between user + * priorities within the same group is not + * standard and hence not supported + * + * prio_type igonred - priority levels within the same group are not + * standard and hence are not supported. According + * to the standard pgid 15 is dedicated to strict + * prioirty traffic (on the port level). + * + * up_map ignored + */ + + bp->dcbx_config_params.admin_configuration_ets_pg[prio] = pgid; + bp->dcbx_config_params.admin_ets_configuration_tx_enable = 1; +} + +static void bnx2x_dcbnl_set_pg_bwgcfg_tx(struct net_device *netdev, + int pgid, u8 bw_pct) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(NETIF_MSG_LINK, "pgid[%d] = %d\n", pgid, bw_pct); + + if (!bnx2x_dcbnl_set_valid(bp) || pgid >= DCBX_MAX_NUM_PG_BW_ENTRIES) + return; + + bp->dcbx_config_params.admin_configuration_bw_precentage[pgid] = bw_pct; + bp->dcbx_config_params.admin_ets_configuration_tx_enable = 1; +} + +static void bnx2x_dcbnl_set_pg_tccfg_rx(struct net_device *netdev, int prio, + u8 prio_type, u8 pgid, u8 bw_pct, + u8 up_map) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(NETIF_MSG_LINK, "Nothing to set; No RX support\n"); +} + +static void bnx2x_dcbnl_set_pg_bwgcfg_rx(struct net_device *netdev, + int pgid, u8 bw_pct) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(NETIF_MSG_LINK, "Nothing to set; No RX support\n"); +} + +static void bnx2x_dcbnl_get_pg_tccfg_tx(struct net_device *netdev, int prio, + u8 *prio_type, u8 *pgid, u8 *bw_pct, + u8 *up_map) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(NETIF_MSG_LINK, "prio = %d\n", prio); + + /** + * bw_pct ingnored - band-width percentage devision between user + * priorities within the same group is not + * standard and hence not supported + * + * prio_type igonred - priority levels within the same group are not + * standard and hence are not supported. According + * to the standard pgid 15 is dedicated to strict + * prioirty traffic (on the port level). + * + * up_map ignored + */ + *up_map = *bw_pct = *prio_type = *pgid = 0; + + if (!bp->dcb_state || prio >= DCBX_MAX_NUM_PRI_PG_ENTRIES) + return; + + *pgid = DCBX_PRI_PG_GET(bp->dcbx_local_feat.ets.pri_pg_tbl, prio); +} + +static void bnx2x_dcbnl_get_pg_bwgcfg_tx(struct net_device *netdev, + int pgid, u8 *bw_pct) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(NETIF_MSG_LINK, "pgid = %d\n", pgid); + + *bw_pct = 0; + + if (!bp->dcb_state || pgid >= DCBX_MAX_NUM_PG_BW_ENTRIES) + return; + + *bw_pct = DCBX_PG_BW_GET(bp->dcbx_local_feat.ets.pg_bw_tbl, pgid); +} + +static void bnx2x_dcbnl_get_pg_tccfg_rx(struct net_device *netdev, int prio, + u8 *prio_type, u8 *pgid, u8 *bw_pct, + u8 *up_map) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(NETIF_MSG_LINK, "Nothing to get; No RX support\n"); + + *prio_type = *pgid = *bw_pct = *up_map = 0; +} + +static void bnx2x_dcbnl_get_pg_bwgcfg_rx(struct net_device *netdev, + int pgid, u8 *bw_pct) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(NETIF_MSG_LINK, "Nothing to get; No RX support\n"); + + *bw_pct = 0; +} + +static void bnx2x_dcbnl_set_pfc_cfg(struct net_device *netdev, int prio, + u8 setting) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(NETIF_MSG_LINK, "prio[%d] = %d\n", prio, setting); + + if (!bnx2x_dcbnl_set_valid(bp) || prio >= MAX_PFC_PRIORITIES) + return; + + bp->dcbx_config_params.admin_pfc_bitmap |= ((setting ? 1 : 0) << prio); + + if (setting) + bp->dcbx_config_params.admin_pfc_tx_enable = 1; +} + +static void bnx2x_dcbnl_get_pfc_cfg(struct net_device *netdev, int prio, + u8 *setting) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(NETIF_MSG_LINK, "prio = %d\n", prio); + + *setting = 0; + + if (!bp->dcb_state || prio >= MAX_PFC_PRIORITIES) + return; + + *setting = (bp->dcbx_local_feat.pfc.pri_en_bitmap >> prio) & 0x1; +} + +static u8 bnx2x_dcbnl_set_all(struct net_device *netdev) +{ + struct bnx2x *bp = netdev_priv(netdev); + int rc = 0; + + DP(NETIF_MSG_LINK, "SET-ALL\n"); + + if (!bnx2x_dcbnl_set_valid(bp)) + return 1; + + if (bp->recovery_state != BNX2X_RECOVERY_DONE) { + netdev_err(bp->dev, "Handling parity error recovery. " + "Try again later\n"); + return 1; + } + if (netif_running(bp->dev)) { + bnx2x_nic_unload(bp, UNLOAD_NORMAL); + rc = bnx2x_nic_load(bp, LOAD_NORMAL); + } + DP(NETIF_MSG_LINK, "set_dcbx_params done (%d)\n", rc); + if (rc) + return 1; + + return 0; +} + +static u8 bnx2x_dcbnl_get_cap(struct net_device *netdev, int capid, u8 *cap) +{ + struct bnx2x *bp = netdev_priv(netdev); + u8 rval = 0; + + if (bp->dcb_state) { + switch (capid) { + case DCB_CAP_ATTR_PG: + *cap = true; + break; + case DCB_CAP_ATTR_PFC: + *cap = true; + break; + case DCB_CAP_ATTR_UP2TC: + *cap = false; + break; + case DCB_CAP_ATTR_PG_TCS: + *cap = 0x80; /* 8 priorities for PGs */ + break; + case DCB_CAP_ATTR_PFC_TCS: + *cap = 0x80; /* 8 priorities for PFC */ + break; + case DCB_CAP_ATTR_GSP: + *cap = true; + break; + case DCB_CAP_ATTR_BCN: + *cap = false; + break; + case DCB_CAP_ATTR_DCBX: + *cap = BNX2X_DCBX_CAPS; ++ break; + default: + rval = -EINVAL; + break; + } + } else + rval = -EINVAL; + + DP(NETIF_MSG_LINK, "capid %d:%x\n", capid, *cap); + return rval; +} + +static u8 bnx2x_dcbnl_get_numtcs(struct net_device *netdev, int tcid, u8 *num) +{ + struct bnx2x *bp = netdev_priv(netdev); + u8 rval = 0; + + DP(NETIF_MSG_LINK, "tcid %d\n", tcid); + + if (bp->dcb_state) { + switch (tcid) { + case DCB_NUMTCS_ATTR_PG: + *num = CHIP_IS_E3B0(bp) ? DCBX_COS_MAX_NUM_E3B0 : + DCBX_COS_MAX_NUM_E2; + break; + case DCB_NUMTCS_ATTR_PFC: + *num = CHIP_IS_E3B0(bp) ? DCBX_COS_MAX_NUM_E3B0 : + DCBX_COS_MAX_NUM_E2; + break; + default: + rval = -EINVAL; + break; + } + } else + rval = -EINVAL; + + return rval; +} + +static u8 bnx2x_dcbnl_set_numtcs(struct net_device *netdev, int tcid, u8 num) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(NETIF_MSG_LINK, "num tcs = %d; Not supported\n", num); + return -EINVAL; +} + +static u8 bnx2x_dcbnl_get_pfc_state(struct net_device *netdev) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(NETIF_MSG_LINK, "state = %d\n", bp->dcbx_local_feat.pfc.enabled); + + if (!bp->dcb_state) + return 0; + + return bp->dcbx_local_feat.pfc.enabled; +} + +static void bnx2x_dcbnl_set_pfc_state(struct net_device *netdev, u8 state) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(NETIF_MSG_LINK, "state = %s\n", state ? "on" : "off"); + + if (!bnx2x_dcbnl_set_valid(bp)) + return; + + bp->dcbx_config_params.admin_pfc_tx_enable = + bp->dcbx_config_params.admin_pfc_enable = (state ? 1 : 0); +} + +static void bnx2x_admin_app_set_ent( + struct bnx2x_admin_priority_app_table *app_ent, + u8 idtype, u16 idval, u8 up) +{ + app_ent->valid = 1; + + switch (idtype) { + case DCB_APP_IDTYPE_ETHTYPE: + app_ent->traffic_type = TRAFFIC_TYPE_ETH; + break; + case DCB_APP_IDTYPE_PORTNUM: + app_ent->traffic_type = TRAFFIC_TYPE_PORT; + break; + default: + break; /* never gets here */ + } + app_ent->app_id = idval; + app_ent->priority = up; +} + +static bool bnx2x_admin_app_is_equal( + struct bnx2x_admin_priority_app_table *app_ent, + u8 idtype, u16 idval) +{ + if (!app_ent->valid) + return false; + + switch (idtype) { + case DCB_APP_IDTYPE_ETHTYPE: + if (app_ent->traffic_type != TRAFFIC_TYPE_ETH) + return false; + break; + case DCB_APP_IDTYPE_PORTNUM: + if (app_ent->traffic_type != TRAFFIC_TYPE_PORT) + return false; + break; + default: + return false; + } + if (app_ent->app_id != idval) + return false; + + return true; +} + +static int bnx2x_set_admin_app_up(struct bnx2x *bp, u8 idtype, u16 idval, u8 up) +{ + int i, ff; + + /* iterate over the app entries looking for idtype and idval */ + for (i = 0, ff = -1; i < 4; i++) { + struct bnx2x_admin_priority_app_table *app_ent = + &bp->dcbx_config_params.admin_priority_app_table[i]; + if (bnx2x_admin_app_is_equal(app_ent, idtype, idval)) + break; + + if (ff < 0 && !app_ent->valid) + ff = i; + } + if (i < 4) + /* if found overwrite up */ + bp->dcbx_config_params. + admin_priority_app_table[i].priority = up; + else if (ff >= 0) + /* not found use first-free */ + bnx2x_admin_app_set_ent( + &bp->dcbx_config_params.admin_priority_app_table[ff], + idtype, idval, up); + else + /* app table is full */ + return -EBUSY; + + /* up configured, if not 0 make sure feature is enabled */ + if (up) + bp->dcbx_config_params.admin_application_priority_tx_enable = 1; + + return 0; +} + +static u8 bnx2x_dcbnl_set_app_up(struct net_device *netdev, u8 idtype, + u16 idval, u8 up) +{ + struct bnx2x *bp = netdev_priv(netdev); + + DP(NETIF_MSG_LINK, "app_type %d, app_id %x, prio bitmap %d\n", + idtype, idval, up); + + if (!bnx2x_dcbnl_set_valid(bp)) + return -EINVAL; + + /* verify idtype */ + switch (idtype) { + case DCB_APP_IDTYPE_ETHTYPE: + case DCB_APP_IDTYPE_PORTNUM: + break; + default: + return -EINVAL; + } + return bnx2x_set_admin_app_up(bp, idtype, idval, up); +} + +static u8 bnx2x_dcbnl_get_dcbx(struct net_device *netdev) +{ + struct bnx2x *bp = netdev_priv(netdev); + u8 state; + + state = DCB_CAP_DCBX_LLD_MANAGED | DCB_CAP_DCBX_VER_CEE; + + if (bp->dcbx_enabled == BNX2X_DCBX_ENABLED_ON_NEG_OFF) + state |= DCB_CAP_DCBX_STATIC; + + return state; +} + +static u8 bnx2x_dcbnl_set_dcbx(struct net_device *netdev, u8 state) +{ + struct bnx2x *bp = netdev_priv(netdev); + DP(NETIF_MSG_LINK, "state = %02x\n", state); + + /* set dcbx mode */ + + if ((state & BNX2X_DCBX_CAPS) != state) { + BNX2X_ERR("Requested DCBX mode %x is beyond advertised " + "capabilities\n", state); + return 1; + } + + if (bp->dcb_state != BNX2X_DCB_STATE_ON) { + BNX2X_ERR("DCB turned off, DCBX configuration is invalid\n"); + return 1; + } + + if (state & DCB_CAP_DCBX_STATIC) + bp->dcbx_enabled = BNX2X_DCBX_ENABLED_ON_NEG_OFF; + else + bp->dcbx_enabled = BNX2X_DCBX_ENABLED_ON_NEG_ON; + + bp->dcbx_mode_uset = true; + return 0; +} + +static u8 bnx2x_dcbnl_get_featcfg(struct net_device *netdev, int featid, + u8 *flags) +{ + struct bnx2x *bp = netdev_priv(netdev); + u8 rval = 0; + + DP(NETIF_MSG_LINK, "featid %d\n", featid); + + if (bp->dcb_state) { + *flags = 0; + switch (featid) { + case DCB_FEATCFG_ATTR_PG: + if (bp->dcbx_local_feat.ets.enabled) + *flags |= DCB_FEATCFG_ENABLE; + if (bp->dcbx_error & DCBX_LOCAL_ETS_ERROR) + *flags |= DCB_FEATCFG_ERROR; + break; + case DCB_FEATCFG_ATTR_PFC: + if (bp->dcbx_local_feat.pfc.enabled) + *flags |= DCB_FEATCFG_ENABLE; + if (bp->dcbx_error & (DCBX_LOCAL_PFC_ERROR | + DCBX_LOCAL_PFC_MISMATCH)) + *flags |= DCB_FEATCFG_ERROR; + break; + case DCB_FEATCFG_ATTR_APP: + if (bp->dcbx_local_feat.app.enabled) + *flags |= DCB_FEATCFG_ENABLE; + if (bp->dcbx_error & (DCBX_LOCAL_APP_ERROR | + DCBX_LOCAL_APP_MISMATCH)) + *flags |= DCB_FEATCFG_ERROR; + break; + default: + rval = -EINVAL; + break; + } + } else + rval = -EINVAL; + + return rval; +} + +static u8 bnx2x_dcbnl_set_featcfg(struct net_device *netdev, int featid, + u8 flags) +{ + struct bnx2x *bp = netdev_priv(netdev); + u8 rval = 0; + + DP(NETIF_MSG_LINK, "featid = %d flags = %02x\n", featid, flags); + + /* ignore the 'advertise' flag */ + if (bnx2x_dcbnl_set_valid(bp)) { + switch (featid) { + case DCB_FEATCFG_ATTR_PG: + bp->dcbx_config_params.admin_ets_enable = + flags & DCB_FEATCFG_ENABLE ? 1 : 0; + bp->dcbx_config_params.admin_ets_willing = + flags & DCB_FEATCFG_WILLING ? 1 : 0; + break; + case DCB_FEATCFG_ATTR_PFC: + bp->dcbx_config_params.admin_pfc_enable = + flags & DCB_FEATCFG_ENABLE ? 1 : 0; + bp->dcbx_config_params.admin_pfc_willing = + flags & DCB_FEATCFG_WILLING ? 1 : 0; + break; + case DCB_FEATCFG_ATTR_APP: + /* ignore enable, always enabled */ + bp->dcbx_config_params.admin_app_priority_willing = + flags & DCB_FEATCFG_WILLING ? 1 : 0; + break; + default: + rval = -EINVAL; + break; + } + } else + rval = -EINVAL; + + return rval; +} + +static int bnx2x_peer_appinfo(struct net_device *netdev, + struct dcb_peer_app_info *info, u16* app_count) +{ + int i; + struct bnx2x *bp = netdev_priv(netdev); + + DP(NETIF_MSG_LINK, "APP-INFO\n"); + + info->willing = (bp->dcbx_remote_flags & DCBX_APP_REM_WILLING) ?: 0; + info->error = (bp->dcbx_remote_flags & DCBX_APP_RX_ERROR) ?: 0; + *app_count = 0; + + for (i = 0; i < DCBX_MAX_APP_PROTOCOL; i++) + if (bp->dcbx_remote_feat.app.app_pri_tbl[i].appBitfield & + DCBX_APP_ENTRY_VALID) + (*app_count)++; + return 0; +} + +static int bnx2x_peer_apptable(struct net_device *netdev, + struct dcb_app *table) +{ + int i, j; + struct bnx2x *bp = netdev_priv(netdev); + + DP(NETIF_MSG_LINK, "APP-TABLE\n"); + + for (i = 0, j = 0; i < DCBX_MAX_APP_PROTOCOL; i++) { + struct dcbx_app_priority_entry *ent = + &bp->dcbx_remote_feat.app.app_pri_tbl[i]; + + if (ent->appBitfield & DCBX_APP_ENTRY_VALID) { + table[j].selector = bnx2x_dcbx_dcbnl_app_idtype(ent); + table[j].priority = bnx2x_dcbx_dcbnl_app_up(ent); + table[j++].protocol = ent->app_id; + } + } + return 0; +} + +static int bnx2x_cee_peer_getpg(struct net_device *netdev, struct cee_pg *pg) +{ + int i; + struct bnx2x *bp = netdev_priv(netdev); + + pg->willing = (bp->dcbx_remote_flags & DCBX_ETS_REM_WILLING) ?: 0; + + for (i = 0; i < CEE_DCBX_MAX_PGS; i++) { + pg->pg_bw[i] = + DCBX_PG_BW_GET(bp->dcbx_remote_feat.ets.pg_bw_tbl, i); + pg->prio_pg[i] = + DCBX_PRI_PG_GET(bp->dcbx_remote_feat.ets.pri_pg_tbl, i); + } + return 0; +} + +static int bnx2x_cee_peer_getpfc(struct net_device *netdev, + struct cee_pfc *pfc) +{ + struct bnx2x *bp = netdev_priv(netdev); + pfc->tcs_supported = bp->dcbx_remote_feat.pfc.pfc_caps; + pfc->pfc_en = bp->dcbx_remote_feat.pfc.pri_en_bitmap; + return 0; +} + +const struct dcbnl_rtnl_ops bnx2x_dcbnl_ops = { + .getstate = bnx2x_dcbnl_get_state, + .setstate = bnx2x_dcbnl_set_state, + .getpermhwaddr = bnx2x_dcbnl_get_perm_hw_addr, + .setpgtccfgtx = bnx2x_dcbnl_set_pg_tccfg_tx, + .setpgbwgcfgtx = bnx2x_dcbnl_set_pg_bwgcfg_tx, + .setpgtccfgrx = bnx2x_dcbnl_set_pg_tccfg_rx, + .setpgbwgcfgrx = bnx2x_dcbnl_set_pg_bwgcfg_rx, + .getpgtccfgtx = bnx2x_dcbnl_get_pg_tccfg_tx, + .getpgbwgcfgtx = bnx2x_dcbnl_get_pg_bwgcfg_tx, + .getpgtccfgrx = bnx2x_dcbnl_get_pg_tccfg_rx, + .getpgbwgcfgrx = bnx2x_dcbnl_get_pg_bwgcfg_rx, + .setpfccfg = bnx2x_dcbnl_set_pfc_cfg, + .getpfccfg = bnx2x_dcbnl_get_pfc_cfg, + .setall = bnx2x_dcbnl_set_all, + .getcap = bnx2x_dcbnl_get_cap, + .getnumtcs = bnx2x_dcbnl_get_numtcs, + .setnumtcs = bnx2x_dcbnl_set_numtcs, + .getpfcstate = bnx2x_dcbnl_get_pfc_state, + .setpfcstate = bnx2x_dcbnl_set_pfc_state, + .setapp = bnx2x_dcbnl_set_app_up, + .getdcbx = bnx2x_dcbnl_get_dcbx, + .setdcbx = bnx2x_dcbnl_set_dcbx, + .getfeatcfg = bnx2x_dcbnl_get_featcfg, + .setfeatcfg = bnx2x_dcbnl_set_featcfg, + .peer_getappinfo = bnx2x_peer_appinfo, + .peer_getapptable = bnx2x_peer_apptable, + .cee_peer_getpg = bnx2x_cee_peer_getpg, + .cee_peer_getpfc = bnx2x_cee_peer_getpfc, +}; + +#endif /* BCM_DCBNL */ diff --cc drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 28bde1610ffb,000000000000..6486ab8c8fc8 mode 100644,000000..100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@@ -1,11607 -1,0 +1,11617 @@@ +/* bnx2x_main.c: Broadcom Everest network driver. + * + * Copyright (c) 2007-2011 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Maintained by: Eilon Greenstein + * Written by: Eliezer Tamir + * Based on code from Michael Chan's bnx2 driver + * UDP CSUM errata workaround by Arik Gendelman + * Slowpath and fastpath rework by Vladislav Zolotarov + * Statistics and Link management by Yitchak Gertner + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include /* for dev_info() */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "bnx2x.h" +#include "bnx2x_init.h" +#include "bnx2x_init_ops.h" +#include "bnx2x_cmn.h" +#include "bnx2x_dcb.h" +#include "bnx2x_sp.h" + +#include +#include "bnx2x_fw_file_hdr.h" +/* FW files */ +#define FW_FILE_VERSION \ + __stringify(BCM_5710_FW_MAJOR_VERSION) "." \ + __stringify(BCM_5710_FW_MINOR_VERSION) "." \ + __stringify(BCM_5710_FW_REVISION_VERSION) "." \ + __stringify(BCM_5710_FW_ENGINEERING_VERSION) +#define FW_FILE_NAME_E1 "bnx2x/bnx2x-e1-" FW_FILE_VERSION ".fw" +#define FW_FILE_NAME_E1H "bnx2x/bnx2x-e1h-" FW_FILE_VERSION ".fw" +#define FW_FILE_NAME_E2 "bnx2x/bnx2x-e2-" FW_FILE_VERSION ".fw" + +/* Time in jiffies before concluding the transmitter is hung */ +#define TX_TIMEOUT (5*HZ) + +static char version[] __devinitdata = + "Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver " + DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; + +MODULE_AUTHOR("Eliezer Tamir"); +MODULE_DESCRIPTION("Broadcom NetXtreme II " + "BCM57710/57711/57711E/" + "57712/57712_MF/57800/57800_MF/57810/57810_MF/" + "57840/57840_MF Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_MODULE_VERSION); +MODULE_FIRMWARE(FW_FILE_NAME_E1); +MODULE_FIRMWARE(FW_FILE_NAME_E1H); +MODULE_FIRMWARE(FW_FILE_NAME_E2); + +static int multi_mode = 1; +module_param(multi_mode, int, 0); +MODULE_PARM_DESC(multi_mode, " Multi queue mode " + "(0 Disable; 1 Enable (default))"); + +int num_queues; +module_param(num_queues, int, 0); +MODULE_PARM_DESC(num_queues, " Number of queues for multi_mode=1" + " (default is as a number of CPUs)"); + +static int disable_tpa; +module_param(disable_tpa, int, 0); +MODULE_PARM_DESC(disable_tpa, " Disable the TPA (LRO) feature"); + +#define INT_MODE_INTx 1 +#define INT_MODE_MSI 2 +static int int_mode; +module_param(int_mode, int, 0); +MODULE_PARM_DESC(int_mode, " Force interrupt mode other than MSI-X " + "(1 INT#x; 2 MSI)"); + +static int dropless_fc; +module_param(dropless_fc, int, 0); +MODULE_PARM_DESC(dropless_fc, " Pause on exhausted host ring"); + +static int poll; +module_param(poll, int, 0); +MODULE_PARM_DESC(poll, " Use polling (for debug)"); + +static int mrrs = -1; +module_param(mrrs, int, 0); +MODULE_PARM_DESC(mrrs, " Force Max Read Req Size (0..3) (for debug)"); + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, " Default debug msglevel"); + + + +struct workqueue_struct *bnx2x_wq; + +enum bnx2x_board_type { + BCM57710 = 0, + BCM57711, + BCM57711E, + BCM57712, + BCM57712_MF, + BCM57800, + BCM57800_MF, + BCM57810, + BCM57810_MF, + BCM57840, + BCM57840_MF +}; + +/* indexed by board_type, above */ +static struct { + char *name; +} board_info[] __devinitdata = { + { "Broadcom NetXtreme II BCM57710 10 Gigabit PCIe [Everest]" }, + { "Broadcom NetXtreme II BCM57711 10 Gigabit PCIe" }, + { "Broadcom NetXtreme II BCM57711E 10 Gigabit PCIe" }, + { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet" }, + { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet Multi Function" }, + { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet" }, + { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet Multi Function" }, + { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet" }, + { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function" }, + { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet" }, + { "Broadcom NetXtreme II BCM57840 10/20 Gigabit " + "Ethernet Multi Function"} +}; + +#ifndef PCI_DEVICE_ID_NX2_57710 +#define PCI_DEVICE_ID_NX2_57710 CHIP_NUM_57710 +#endif +#ifndef PCI_DEVICE_ID_NX2_57711 +#define PCI_DEVICE_ID_NX2_57711 CHIP_NUM_57711 +#endif +#ifndef PCI_DEVICE_ID_NX2_57711E +#define PCI_DEVICE_ID_NX2_57711E CHIP_NUM_57711E +#endif +#ifndef PCI_DEVICE_ID_NX2_57712 +#define PCI_DEVICE_ID_NX2_57712 CHIP_NUM_57712 +#endif +#ifndef PCI_DEVICE_ID_NX2_57712_MF +#define PCI_DEVICE_ID_NX2_57712_MF CHIP_NUM_57712_MF +#endif +#ifndef PCI_DEVICE_ID_NX2_57800 +#define PCI_DEVICE_ID_NX2_57800 CHIP_NUM_57800 +#endif +#ifndef PCI_DEVICE_ID_NX2_57800_MF +#define PCI_DEVICE_ID_NX2_57800_MF CHIP_NUM_57800_MF +#endif +#ifndef PCI_DEVICE_ID_NX2_57810 +#define PCI_DEVICE_ID_NX2_57810 CHIP_NUM_57810 +#endif +#ifndef PCI_DEVICE_ID_NX2_57810_MF +#define PCI_DEVICE_ID_NX2_57810_MF CHIP_NUM_57810_MF +#endif +#ifndef PCI_DEVICE_ID_NX2_57840 +#define PCI_DEVICE_ID_NX2_57840 CHIP_NUM_57840 +#endif +#ifndef PCI_DEVICE_ID_NX2_57840_MF +#define PCI_DEVICE_ID_NX2_57840_MF CHIP_NUM_57840_MF +#endif +static DEFINE_PCI_DEVICE_TABLE(bnx2x_pci_tbl) = { + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57710), BCM57710 }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711), BCM57711 }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711E), BCM57711E }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712), BCM57712 }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57712_MF), BCM57712_MF }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800), BCM57800 }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57800_MF), BCM57800_MF }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810), BCM57810 }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810_MF), BCM57810_MF }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840), BCM57840 }, + { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_MF), BCM57840_MF }, + { 0 } +}; + +MODULE_DEVICE_TABLE(pci, bnx2x_pci_tbl); + +/**************************************************************************** +* General service functions +****************************************************************************/ + +static inline void __storm_memset_dma_mapping(struct bnx2x *bp, + u32 addr, dma_addr_t mapping) +{ + REG_WR(bp, addr, U64_LO(mapping)); + REG_WR(bp, addr + 4, U64_HI(mapping)); +} + +static inline void storm_memset_spq_addr(struct bnx2x *bp, + dma_addr_t mapping, u16 abs_fid) +{ + u32 addr = XSEM_REG_FAST_MEMORY + + XSTORM_SPQ_PAGE_BASE_OFFSET(abs_fid); + + __storm_memset_dma_mapping(bp, addr, mapping); +} + +static inline void storm_memset_vf_to_pf(struct bnx2x *bp, u16 abs_fid, + u16 pf_id) +{ + REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_VF_TO_PF_OFFSET(abs_fid), + pf_id); + REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_VF_TO_PF_OFFSET(abs_fid), + pf_id); + REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_VF_TO_PF_OFFSET(abs_fid), + pf_id); + REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_VF_TO_PF_OFFSET(abs_fid), + pf_id); +} + +static inline void storm_memset_func_en(struct bnx2x *bp, u16 abs_fid, + u8 enable) +{ + REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(abs_fid), + enable); + REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(abs_fid), + enable); + REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(abs_fid), + enable); + REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(abs_fid), + enable); +} + +static inline void storm_memset_eq_data(struct bnx2x *bp, + struct event_ring_data *eq_data, + u16 pfid) +{ + size_t size = sizeof(struct event_ring_data); + + u32 addr = BAR_CSTRORM_INTMEM + CSTORM_EVENT_RING_DATA_OFFSET(pfid); + + __storm_memset_struct(bp, addr, size, (u32 *)eq_data); +} + +static inline void storm_memset_eq_prod(struct bnx2x *bp, u16 eq_prod, + u16 pfid) +{ + u32 addr = BAR_CSTRORM_INTMEM + CSTORM_EVENT_RING_PROD_OFFSET(pfid); + REG_WR16(bp, addr, eq_prod); +} + +/* used only at init + * locking is done by mcp + */ +static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val) +{ + pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, addr); + pci_write_config_dword(bp->pdev, PCICFG_GRC_DATA, val); + pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, + PCICFG_VENDOR_ID_OFFSET); +} + +static u32 bnx2x_reg_rd_ind(struct bnx2x *bp, u32 addr) +{ + u32 val; + + pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, addr); + pci_read_config_dword(bp->pdev, PCICFG_GRC_DATA, &val); + pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, + PCICFG_VENDOR_ID_OFFSET); + + return val; +} + +#define DMAE_DP_SRC_GRC "grc src_addr [%08x]" +#define DMAE_DP_SRC_PCI "pci src_addr [%x:%08x]" +#define DMAE_DP_DST_GRC "grc dst_addr [%08x]" +#define DMAE_DP_DST_PCI "pci dst_addr [%x:%08x]" +#define DMAE_DP_DST_NONE "dst_addr [none]" + +static void bnx2x_dp_dmae(struct bnx2x *bp, struct dmae_command *dmae, + int msglvl) +{ + u32 src_type = dmae->opcode & DMAE_COMMAND_SRC; + + switch (dmae->opcode & DMAE_COMMAND_DST) { + case DMAE_CMD_DST_PCI: + if (src_type == DMAE_CMD_SRC_PCI) + DP(msglvl, "DMAE: opcode 0x%08x\n" + "src [%x:%08x], len [%d*4], dst [%x:%08x]\n" + "comp_addr [%x:%08x], comp_val 0x%08x\n", + dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo, + dmae->len, dmae->dst_addr_hi, dmae->dst_addr_lo, + dmae->comp_addr_hi, dmae->comp_addr_lo, + dmae->comp_val); + else + DP(msglvl, "DMAE: opcode 0x%08x\n" + "src [%08x], len [%d*4], dst [%x:%08x]\n" + "comp_addr [%x:%08x], comp_val 0x%08x\n", + dmae->opcode, dmae->src_addr_lo >> 2, + dmae->len, dmae->dst_addr_hi, dmae->dst_addr_lo, + dmae->comp_addr_hi, dmae->comp_addr_lo, + dmae->comp_val); + break; + case DMAE_CMD_DST_GRC: + if (src_type == DMAE_CMD_SRC_PCI) + DP(msglvl, "DMAE: opcode 0x%08x\n" + "src [%x:%08x], len [%d*4], dst_addr [%08x]\n" + "comp_addr [%x:%08x], comp_val 0x%08x\n", + dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo, + dmae->len, dmae->dst_addr_lo >> 2, + dmae->comp_addr_hi, dmae->comp_addr_lo, + dmae->comp_val); + else + DP(msglvl, "DMAE: opcode 0x%08x\n" + "src [%08x], len [%d*4], dst [%08x]\n" + "comp_addr [%x:%08x], comp_val 0x%08x\n", + dmae->opcode, dmae->src_addr_lo >> 2, + dmae->len, dmae->dst_addr_lo >> 2, + dmae->comp_addr_hi, dmae->comp_addr_lo, + dmae->comp_val); + break; + default: + if (src_type == DMAE_CMD_SRC_PCI) + DP(msglvl, "DMAE: opcode 0x%08x\n" + "src_addr [%x:%08x] len [%d * 4] dst_addr [none]\n" + "comp_addr [%x:%08x] comp_val 0x%08x\n", + dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo, + dmae->len, dmae->comp_addr_hi, dmae->comp_addr_lo, + dmae->comp_val); + else + DP(msglvl, "DMAE: opcode 0x%08x\n" + "src_addr [%08x] len [%d * 4] dst_addr [none]\n" + "comp_addr [%x:%08x] comp_val 0x%08x\n", + dmae->opcode, dmae->src_addr_lo >> 2, + dmae->len, dmae->comp_addr_hi, dmae->comp_addr_lo, + dmae->comp_val); + break; + } + +} + +/* copy command into DMAE command memory and set DMAE command go */ +void bnx2x_post_dmae(struct bnx2x *bp, struct dmae_command *dmae, int idx) +{ + u32 cmd_offset; + int i; + + cmd_offset = (DMAE_REG_CMD_MEM + sizeof(struct dmae_command) * idx); + for (i = 0; i < (sizeof(struct dmae_command)/4); i++) { + REG_WR(bp, cmd_offset + i*4, *(((u32 *)dmae) + i)); + + DP(BNX2X_MSG_OFF, "DMAE cmd[%d].%d (0x%08x) : 0x%08x\n", + idx, i, cmd_offset + i*4, *(((u32 *)dmae) + i)); + } + REG_WR(bp, dmae_reg_go_c[idx], 1); +} + +u32 bnx2x_dmae_opcode_add_comp(u32 opcode, u8 comp_type) +{ + return opcode | ((comp_type << DMAE_COMMAND_C_DST_SHIFT) | + DMAE_CMD_C_ENABLE); +} + +u32 bnx2x_dmae_opcode_clr_src_reset(u32 opcode) +{ + return opcode & ~DMAE_CMD_SRC_RESET; +} + +u32 bnx2x_dmae_opcode(struct bnx2x *bp, u8 src_type, u8 dst_type, + bool with_comp, u8 comp_type) +{ + u32 opcode = 0; + + opcode |= ((src_type << DMAE_COMMAND_SRC_SHIFT) | + (dst_type << DMAE_COMMAND_DST_SHIFT)); + + opcode |= (DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET); + + opcode |= (BP_PORT(bp) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0); + opcode |= ((BP_VN(bp) << DMAE_CMD_E1HVN_SHIFT) | + (BP_VN(bp) << DMAE_COMMAND_DST_VN_SHIFT)); + opcode |= (DMAE_COM_SET_ERR << DMAE_COMMAND_ERR_POLICY_SHIFT); + +#ifdef __BIG_ENDIAN + opcode |= DMAE_CMD_ENDIANITY_B_DW_SWAP; +#else + opcode |= DMAE_CMD_ENDIANITY_DW_SWAP; +#endif + if (with_comp) + opcode = bnx2x_dmae_opcode_add_comp(opcode, comp_type); + return opcode; +} + +static void bnx2x_prep_dmae_with_comp(struct bnx2x *bp, + struct dmae_command *dmae, + u8 src_type, u8 dst_type) +{ + memset(dmae, 0, sizeof(struct dmae_command)); + + /* set the opcode */ + dmae->opcode = bnx2x_dmae_opcode(bp, src_type, dst_type, + true, DMAE_COMP_PCI); + + /* fill in the completion parameters */ + dmae->comp_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_comp)); + dmae->comp_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_comp)); + dmae->comp_val = DMAE_COMP_VAL; +} + +/* issue a dmae command over the init-channel and wailt for completion */ +static int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, + struct dmae_command *dmae) +{ + u32 *wb_comp = bnx2x_sp(bp, wb_comp); + int cnt = CHIP_REV_IS_SLOW(bp) ? (400000) : 4000; + int rc = 0; + + DP(BNX2X_MSG_OFF, "data before [0x%08x 0x%08x 0x%08x 0x%08x]\n", + bp->slowpath->wb_data[0], bp->slowpath->wb_data[1], + bp->slowpath->wb_data[2], bp->slowpath->wb_data[3]); + + /* + * Lock the dmae channel. Disable BHs to prevent a dead-lock + * as long as this code is called both from syscall context and + * from ndo_set_rx_mode() flow that may be called from BH. + */ + spin_lock_bh(&bp->dmae_lock); + + /* reset completion */ + *wb_comp = 0; + + /* post the command on the channel used for initializations */ + bnx2x_post_dmae(bp, dmae, INIT_DMAE_C(bp)); + + /* wait for completion */ + udelay(5); + while ((*wb_comp & ~DMAE_PCI_ERR_FLAG) != DMAE_COMP_VAL) { + DP(BNX2X_MSG_OFF, "wb_comp 0x%08x\n", *wb_comp); + + if (!cnt) { + BNX2X_ERR("DMAE timeout!\n"); + rc = DMAE_TIMEOUT; + goto unlock; + } + cnt--; + udelay(50); + } + if (*wb_comp & DMAE_PCI_ERR_FLAG) { + BNX2X_ERR("DMAE PCI error!\n"); + rc = DMAE_PCI_ERROR; + } + + DP(BNX2X_MSG_OFF, "data after [0x%08x 0x%08x 0x%08x 0x%08x]\n", + bp->slowpath->wb_data[0], bp->slowpath->wb_data[1], + bp->slowpath->wb_data[2], bp->slowpath->wb_data[3]); + +unlock: + spin_unlock_bh(&bp->dmae_lock); + return rc; +} + +void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr, + u32 len32) +{ + struct dmae_command dmae; + + if (!bp->dmae_ready) { + u32 *data = bnx2x_sp(bp, wb_data[0]); + + DP(BNX2X_MSG_OFF, "DMAE is not ready (dst_addr %08x len32 %d)" + " using indirect\n", dst_addr, len32); + bnx2x_init_ind_wr(bp, dst_addr, data, len32); + return; + } + + /* set opcode and fixed command fields */ + bnx2x_prep_dmae_with_comp(bp, &dmae, DMAE_SRC_PCI, DMAE_DST_GRC); + + /* fill in addresses and len */ + dmae.src_addr_lo = U64_LO(dma_addr); + dmae.src_addr_hi = U64_HI(dma_addr); + dmae.dst_addr_lo = dst_addr >> 2; + dmae.dst_addr_hi = 0; + dmae.len = len32; + + bnx2x_dp_dmae(bp, &dmae, BNX2X_MSG_OFF); + + /* issue the command and wait for completion */ + bnx2x_issue_dmae_with_comp(bp, &dmae); +} + +void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32) +{ + struct dmae_command dmae; + + if (!bp->dmae_ready) { + u32 *data = bnx2x_sp(bp, wb_data[0]); + int i; + + DP(BNX2X_MSG_OFF, "DMAE is not ready (src_addr %08x len32 %d)" + " using indirect\n", src_addr, len32); + for (i = 0; i < len32; i++) + data[i] = bnx2x_reg_rd_ind(bp, src_addr + i*4); + return; + } + + /* set opcode and fixed command fields */ + bnx2x_prep_dmae_with_comp(bp, &dmae, DMAE_SRC_GRC, DMAE_DST_PCI); + + /* fill in addresses and len */ + dmae.src_addr_lo = src_addr >> 2; + dmae.src_addr_hi = 0; + dmae.dst_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_data)); + dmae.dst_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_data)); + dmae.len = len32; + + bnx2x_dp_dmae(bp, &dmae, BNX2X_MSG_OFF); + + /* issue the command and wait for completion */ + bnx2x_issue_dmae_with_comp(bp, &dmae); +} + +static void bnx2x_write_dmae_phys_len(struct bnx2x *bp, dma_addr_t phys_addr, + u32 addr, u32 len) +{ + int dmae_wr_max = DMAE_LEN32_WR_MAX(bp); + int offset = 0; + + while (len > dmae_wr_max) { + bnx2x_write_dmae(bp, phys_addr + offset, + addr + offset, dmae_wr_max); + offset += dmae_wr_max * 4; + len -= dmae_wr_max; + } + + bnx2x_write_dmae(bp, phys_addr + offset, addr + offset, len); +} + +/* used only for slowpath so not inlined */ +static void bnx2x_wb_wr(struct bnx2x *bp, int reg, u32 val_hi, u32 val_lo) +{ + u32 wb_write[2]; + + wb_write[0] = val_hi; + wb_write[1] = val_lo; + REG_WR_DMAE(bp, reg, wb_write, 2); +} + +#ifdef USE_WB_RD +static u64 bnx2x_wb_rd(struct bnx2x *bp, int reg) +{ + u32 wb_data[2]; + + REG_RD_DMAE(bp, reg, wb_data, 2); + + return HILO_U64(wb_data[0], wb_data[1]); +} +#endif + +static int bnx2x_mc_assert(struct bnx2x *bp) +{ + char last_idx; + int i, rc = 0; + u32 row0, row1, row2, row3; + + /* XSTORM */ + last_idx = REG_RD8(bp, BAR_XSTRORM_INTMEM + + XSTORM_ASSERT_LIST_INDEX_OFFSET); + if (last_idx) + BNX2X_ERR("XSTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx); + + /* print the asserts */ + for (i = 0; i < STROM_ASSERT_ARRAY_SIZE; i++) { + + row0 = REG_RD(bp, BAR_XSTRORM_INTMEM + + XSTORM_ASSERT_LIST_OFFSET(i)); + row1 = REG_RD(bp, BAR_XSTRORM_INTMEM + + XSTORM_ASSERT_LIST_OFFSET(i) + 4); + row2 = REG_RD(bp, BAR_XSTRORM_INTMEM + + XSTORM_ASSERT_LIST_OFFSET(i) + 8); + row3 = REG_RD(bp, BAR_XSTRORM_INTMEM + + XSTORM_ASSERT_LIST_OFFSET(i) + 12); + + if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) { + BNX2X_ERR("XSTORM_ASSERT_INDEX 0x%x = 0x%08x" + " 0x%08x 0x%08x 0x%08x\n", + i, row3, row2, row1, row0); + rc++; + } else { + break; + } + } + + /* TSTORM */ + last_idx = REG_RD8(bp, BAR_TSTRORM_INTMEM + + TSTORM_ASSERT_LIST_INDEX_OFFSET); + if (last_idx) + BNX2X_ERR("TSTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx); + + /* print the asserts */ + for (i = 0; i < STROM_ASSERT_ARRAY_SIZE; i++) { + + row0 = REG_RD(bp, BAR_TSTRORM_INTMEM + + TSTORM_ASSERT_LIST_OFFSET(i)); + row1 = REG_RD(bp, BAR_TSTRORM_INTMEM + + TSTORM_ASSERT_LIST_OFFSET(i) + 4); + row2 = REG_RD(bp, BAR_TSTRORM_INTMEM + + TSTORM_ASSERT_LIST_OFFSET(i) + 8); + row3 = REG_RD(bp, BAR_TSTRORM_INTMEM + + TSTORM_ASSERT_LIST_OFFSET(i) + 12); + + if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) { + BNX2X_ERR("TSTORM_ASSERT_INDEX 0x%x = 0x%08x" + " 0x%08x 0x%08x 0x%08x\n", + i, row3, row2, row1, row0); + rc++; + } else { + break; + } + } + + /* CSTORM */ + last_idx = REG_RD8(bp, BAR_CSTRORM_INTMEM + + CSTORM_ASSERT_LIST_INDEX_OFFSET); + if (last_idx) + BNX2X_ERR("CSTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx); + + /* print the asserts */ + for (i = 0; i < STROM_ASSERT_ARRAY_SIZE; i++) { + + row0 = REG_RD(bp, BAR_CSTRORM_INTMEM + + CSTORM_ASSERT_LIST_OFFSET(i)); + row1 = REG_RD(bp, BAR_CSTRORM_INTMEM + + CSTORM_ASSERT_LIST_OFFSET(i) + 4); + row2 = REG_RD(bp, BAR_CSTRORM_INTMEM + + CSTORM_ASSERT_LIST_OFFSET(i) + 8); + row3 = REG_RD(bp, BAR_CSTRORM_INTMEM + + CSTORM_ASSERT_LIST_OFFSET(i) + 12); + + if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) { + BNX2X_ERR("CSTORM_ASSERT_INDEX 0x%x = 0x%08x" + " 0x%08x 0x%08x 0x%08x\n", + i, row3, row2, row1, row0); + rc++; + } else { + break; + } + } + + /* USTORM */ + last_idx = REG_RD8(bp, BAR_USTRORM_INTMEM + + USTORM_ASSERT_LIST_INDEX_OFFSET); + if (last_idx) + BNX2X_ERR("USTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx); + + /* print the asserts */ + for (i = 0; i < STROM_ASSERT_ARRAY_SIZE; i++) { + + row0 = REG_RD(bp, BAR_USTRORM_INTMEM + + USTORM_ASSERT_LIST_OFFSET(i)); + row1 = REG_RD(bp, BAR_USTRORM_INTMEM + + USTORM_ASSERT_LIST_OFFSET(i) + 4); + row2 = REG_RD(bp, BAR_USTRORM_INTMEM + + USTORM_ASSERT_LIST_OFFSET(i) + 8); + row3 = REG_RD(bp, BAR_USTRORM_INTMEM + + USTORM_ASSERT_LIST_OFFSET(i) + 12); + + if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) { + BNX2X_ERR("USTORM_ASSERT_INDEX 0x%x = 0x%08x" + " 0x%08x 0x%08x 0x%08x\n", + i, row3, row2, row1, row0); + rc++; + } else { + break; + } + } + + return rc; +} + +void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl) +{ + u32 addr, val; + u32 mark, offset; + __be32 data[9]; + int word; + u32 trace_shmem_base; + if (BP_NOMCP(bp)) { + BNX2X_ERR("NO MCP - can not dump\n"); + return; + } + netdev_printk(lvl, bp->dev, "bc %d.%d.%d\n", + (bp->common.bc_ver & 0xff0000) >> 16, + (bp->common.bc_ver & 0xff00) >> 8, + (bp->common.bc_ver & 0xff)); + + val = REG_RD(bp, MCP_REG_MCPR_CPU_PROGRAM_COUNTER); + if (val == REG_RD(bp, MCP_REG_MCPR_CPU_PROGRAM_COUNTER)) + printk("%s" "MCP PC at 0x%x\n", lvl, val); + + if (BP_PATH(bp) == 0) + trace_shmem_base = bp->common.shmem_base; + else + trace_shmem_base = SHMEM2_RD(bp, other_shmem_base_addr); + addr = trace_shmem_base - 0x0800 + 4; + mark = REG_RD(bp, addr); + mark = (CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH) + + ((mark + 0x3) & ~0x3) - 0x08000000; + printk("%s" "begin fw dump (mark 0x%x)\n", lvl, mark); + + printk("%s", lvl); + for (offset = mark; offset <= trace_shmem_base; offset += 0x8*4) { + for (word = 0; word < 8; word++) + data[word] = htonl(REG_RD(bp, offset + 4*word)); + data[8] = 0x0; + pr_cont("%s", (char *)data); + } + for (offset = addr + 4; offset <= mark; offset += 0x8*4) { + for (word = 0; word < 8; word++) + data[word] = htonl(REG_RD(bp, offset + 4*word)); + data[8] = 0x0; + pr_cont("%s", (char *)data); + } + printk("%s" "end of fw dump\n", lvl); +} + +static inline void bnx2x_fw_dump(struct bnx2x *bp) +{ + bnx2x_fw_dump_lvl(bp, KERN_ERR); +} + +void bnx2x_panic_dump(struct bnx2x *bp) +{ + int i; + u16 j; + struct hc_sp_status_block_data sp_sb_data; + int func = BP_FUNC(bp); +#ifdef BNX2X_STOP_ON_ERROR + u16 start = 0, end = 0; + u8 cos; +#endif + + bp->stats_state = STATS_STATE_DISABLED; + DP(BNX2X_MSG_STATS, "stats_state - DISABLED\n"); + + BNX2X_ERR("begin crash dump -----------------\n"); + + /* Indices */ + /* Common */ + BNX2X_ERR("def_idx(0x%x) def_att_idx(0x%x) attn_state(0x%x)" + " spq_prod_idx(0x%x) next_stats_cnt(0x%x)\n", + bp->def_idx, bp->def_att_idx, bp->attn_state, + bp->spq_prod_idx, bp->stats_counter); + BNX2X_ERR("DSB: attn bits(0x%x) ack(0x%x) id(0x%x) idx(0x%x)\n", + bp->def_status_blk->atten_status_block.attn_bits, + bp->def_status_blk->atten_status_block.attn_bits_ack, + bp->def_status_blk->atten_status_block.status_block_id, + bp->def_status_blk->atten_status_block.attn_bits_index); + BNX2X_ERR(" def ("); + for (i = 0; i < HC_SP_SB_MAX_INDICES; i++) + pr_cont("0x%x%s", + bp->def_status_blk->sp_sb.index_values[i], + (i == HC_SP_SB_MAX_INDICES - 1) ? ") " : " "); + + for (i = 0; i < sizeof(struct hc_sp_status_block_data)/sizeof(u32); i++) + *((u32 *)&sp_sb_data + i) = REG_RD(bp, BAR_CSTRORM_INTMEM + + CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(func) + + i*sizeof(u32)); + + pr_cont("igu_sb_id(0x%x) igu_seg_id(0x%x) pf_id(0x%x) vnic_id(0x%x) vf_id(0x%x) vf_valid (0x%x) state(0x%x)\n", + sp_sb_data.igu_sb_id, + sp_sb_data.igu_seg_id, + sp_sb_data.p_func.pf_id, + sp_sb_data.p_func.vnic_id, + sp_sb_data.p_func.vf_id, + sp_sb_data.p_func.vf_valid, + sp_sb_data.state); + + + for_each_eth_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + int loop; + struct hc_status_block_data_e2 sb_data_e2; + struct hc_status_block_data_e1x sb_data_e1x; + struct hc_status_block_sm *hc_sm_p = + CHIP_IS_E1x(bp) ? + sb_data_e1x.common.state_machine : + sb_data_e2.common.state_machine; + struct hc_index_data *hc_index_p = + CHIP_IS_E1x(bp) ? + sb_data_e1x.index_data : + sb_data_e2.index_data; + u8 data_size, cos; + u32 *sb_data_p; + struct bnx2x_fp_txdata txdata; + + /* Rx */ + BNX2X_ERR("fp%d: rx_bd_prod(0x%x) rx_bd_cons(0x%x)" + " rx_comp_prod(0x%x)" + " rx_comp_cons(0x%x) *rx_cons_sb(0x%x)\n", + i, fp->rx_bd_prod, fp->rx_bd_cons, + fp->rx_comp_prod, + fp->rx_comp_cons, le16_to_cpu(*fp->rx_cons_sb)); + BNX2X_ERR(" rx_sge_prod(0x%x) last_max_sge(0x%x)" + " fp_hc_idx(0x%x)\n", + fp->rx_sge_prod, fp->last_max_sge, + le16_to_cpu(fp->fp_hc_idx)); + + /* Tx */ + for_each_cos_in_tx_queue(fp, cos) + { + txdata = fp->txdata[cos]; + BNX2X_ERR("fp%d: tx_pkt_prod(0x%x) tx_pkt_cons(0x%x)" + " tx_bd_prod(0x%x) tx_bd_cons(0x%x)" + " *tx_cons_sb(0x%x)\n", + i, txdata.tx_pkt_prod, + txdata.tx_pkt_cons, txdata.tx_bd_prod, + txdata.tx_bd_cons, + le16_to_cpu(*txdata.tx_cons_sb)); + } + + loop = CHIP_IS_E1x(bp) ? + HC_SB_MAX_INDICES_E1X : HC_SB_MAX_INDICES_E2; + + /* host sb data */ + +#ifdef BCM_CNIC + if (IS_FCOE_FP(fp)) + continue; +#endif + BNX2X_ERR(" run indexes ("); + for (j = 0; j < HC_SB_MAX_SM; j++) + pr_cont("0x%x%s", + fp->sb_running_index[j], + (j == HC_SB_MAX_SM - 1) ? ")" : " "); + + BNX2X_ERR(" indexes ("); + for (j = 0; j < loop; j++) + pr_cont("0x%x%s", + fp->sb_index_values[j], + (j == loop - 1) ? ")" : " "); + /* fw sb data */ + data_size = CHIP_IS_E1x(bp) ? + sizeof(struct hc_status_block_data_e1x) : + sizeof(struct hc_status_block_data_e2); + data_size /= sizeof(u32); + sb_data_p = CHIP_IS_E1x(bp) ? + (u32 *)&sb_data_e1x : + (u32 *)&sb_data_e2; + /* copy sb data in here */ + for (j = 0; j < data_size; j++) + *(sb_data_p + j) = REG_RD(bp, BAR_CSTRORM_INTMEM + + CSTORM_STATUS_BLOCK_DATA_OFFSET(fp->fw_sb_id) + + j * sizeof(u32)); + + if (!CHIP_IS_E1x(bp)) { + pr_cont("pf_id(0x%x) vf_id(0x%x) vf_valid(0x%x) " + "vnic_id(0x%x) same_igu_sb_1b(0x%x) " + "state(0x%x)\n", + sb_data_e2.common.p_func.pf_id, + sb_data_e2.common.p_func.vf_id, + sb_data_e2.common.p_func.vf_valid, + sb_data_e2.common.p_func.vnic_id, + sb_data_e2.common.same_igu_sb_1b, + sb_data_e2.common.state); + } else { + pr_cont("pf_id(0x%x) vf_id(0x%x) vf_valid(0x%x) " + "vnic_id(0x%x) same_igu_sb_1b(0x%x) " + "state(0x%x)\n", + sb_data_e1x.common.p_func.pf_id, + sb_data_e1x.common.p_func.vf_id, + sb_data_e1x.common.p_func.vf_valid, + sb_data_e1x.common.p_func.vnic_id, + sb_data_e1x.common.same_igu_sb_1b, + sb_data_e1x.common.state); + } + + /* SB_SMs data */ + for (j = 0; j < HC_SB_MAX_SM; j++) { + pr_cont("SM[%d] __flags (0x%x) " + "igu_sb_id (0x%x) igu_seg_id(0x%x) " + "time_to_expire (0x%x) " + "timer_value(0x%x)\n", j, + hc_sm_p[j].__flags, + hc_sm_p[j].igu_sb_id, + hc_sm_p[j].igu_seg_id, + hc_sm_p[j].time_to_expire, + hc_sm_p[j].timer_value); + } + + /* Indecies data */ + for (j = 0; j < loop; j++) { + pr_cont("INDEX[%d] flags (0x%x) " + "timeout (0x%x)\n", j, + hc_index_p[j].flags, + hc_index_p[j].timeout); + } + } + +#ifdef BNX2X_STOP_ON_ERROR + /* Rings */ + /* Rx */ + for_each_rx_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + + start = RX_BD(le16_to_cpu(*fp->rx_cons_sb) - 10); + end = RX_BD(le16_to_cpu(*fp->rx_cons_sb) + 503); + for (j = start; j != end; j = RX_BD(j + 1)) { + u32 *rx_bd = (u32 *)&fp->rx_desc_ring[j]; + struct sw_rx_bd *sw_bd = &fp->rx_buf_ring[j]; + + BNX2X_ERR("fp%d: rx_bd[%x]=[%x:%x] sw_bd=[%p]\n", + i, j, rx_bd[1], rx_bd[0], sw_bd->skb); + } + + start = RX_SGE(fp->rx_sge_prod); + end = RX_SGE(fp->last_max_sge); + for (j = start; j != end; j = RX_SGE(j + 1)) { + u32 *rx_sge = (u32 *)&fp->rx_sge_ring[j]; + struct sw_rx_page *sw_page = &fp->rx_page_ring[j]; + + BNX2X_ERR("fp%d: rx_sge[%x]=[%x:%x] sw_page=[%p]\n", + i, j, rx_sge[1], rx_sge[0], sw_page->page); + } + + start = RCQ_BD(fp->rx_comp_cons - 10); + end = RCQ_BD(fp->rx_comp_cons + 503); + for (j = start; j != end; j = RCQ_BD(j + 1)) { + u32 *cqe = (u32 *)&fp->rx_comp_ring[j]; + + BNX2X_ERR("fp%d: cqe[%x]=[%x:%x:%x:%x]\n", + i, j, cqe[0], cqe[1], cqe[2], cqe[3]); + } + } + + /* Tx */ + for_each_tx_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + for_each_cos_in_tx_queue(fp, cos) { + struct bnx2x_fp_txdata *txdata = &fp->txdata[cos]; + + start = TX_BD(le16_to_cpu(*txdata->tx_cons_sb) - 10); + end = TX_BD(le16_to_cpu(*txdata->tx_cons_sb) + 245); + for (j = start; j != end; j = TX_BD(j + 1)) { + struct sw_tx_bd *sw_bd = + &txdata->tx_buf_ring[j]; + + BNX2X_ERR("fp%d: txdata %d, " + "packet[%x]=[%p,%x]\n", + i, cos, j, sw_bd->skb, + sw_bd->first_bd); + } + + start = TX_BD(txdata->tx_bd_cons - 10); + end = TX_BD(txdata->tx_bd_cons + 254); + for (j = start; j != end; j = TX_BD(j + 1)) { + u32 *tx_bd = (u32 *)&txdata->tx_desc_ring[j]; + + BNX2X_ERR("fp%d: txdata %d, tx_bd[%x]=" + "[%x:%x:%x:%x]\n", + i, cos, j, tx_bd[0], tx_bd[1], + tx_bd[2], tx_bd[3]); + } + } + } +#endif + bnx2x_fw_dump(bp); + bnx2x_mc_assert(bp); + BNX2X_ERR("end crash dump -----------------\n"); +} + +/* + * FLR Support for E2 + * + * bnx2x_pf_flr_clnup() is called during nic_load in the per function HW + * initialization. + */ +#define FLR_WAIT_USEC 10000 /* 10 miliseconds */ +#define FLR_WAIT_INTERAVAL 50 /* usec */ +#define FLR_POLL_CNT (FLR_WAIT_USEC/FLR_WAIT_INTERAVAL) /* 200 */ + +struct pbf_pN_buf_regs { + int pN; + u32 init_crd; + u32 crd; + u32 crd_freed; +}; + +struct pbf_pN_cmd_regs { + int pN; + u32 lines_occup; + u32 lines_freed; +}; + +static void bnx2x_pbf_pN_buf_flushed(struct bnx2x *bp, + struct pbf_pN_buf_regs *regs, + u32 poll_count) +{ + u32 init_crd, crd, crd_start, crd_freed, crd_freed_start; + u32 cur_cnt = poll_count; + + crd_freed = crd_freed_start = REG_RD(bp, regs->crd_freed); + crd = crd_start = REG_RD(bp, regs->crd); + init_crd = REG_RD(bp, regs->init_crd); + + DP(BNX2X_MSG_SP, "INIT CREDIT[%d] : %x\n", regs->pN, init_crd); + DP(BNX2X_MSG_SP, "CREDIT[%d] : s:%x\n", regs->pN, crd); + DP(BNX2X_MSG_SP, "CREDIT_FREED[%d]: s:%x\n", regs->pN, crd_freed); + + while ((crd != init_crd) && ((u32)SUB_S32(crd_freed, crd_freed_start) < + (init_crd - crd_start))) { + if (cur_cnt--) { + udelay(FLR_WAIT_INTERAVAL); + crd = REG_RD(bp, regs->crd); + crd_freed = REG_RD(bp, regs->crd_freed); + } else { + DP(BNX2X_MSG_SP, "PBF tx buffer[%d] timed out\n", + regs->pN); + DP(BNX2X_MSG_SP, "CREDIT[%d] : c:%x\n", + regs->pN, crd); + DP(BNX2X_MSG_SP, "CREDIT_FREED[%d]: c:%x\n", + regs->pN, crd_freed); + break; + } + } + DP(BNX2X_MSG_SP, "Waited %d*%d usec for PBF tx buffer[%d]\n", + poll_count-cur_cnt, FLR_WAIT_INTERAVAL, regs->pN); +} + +static void bnx2x_pbf_pN_cmd_flushed(struct bnx2x *bp, + struct pbf_pN_cmd_regs *regs, + u32 poll_count) +{ + u32 occup, to_free, freed, freed_start; + u32 cur_cnt = poll_count; + + occup = to_free = REG_RD(bp, regs->lines_occup); + freed = freed_start = REG_RD(bp, regs->lines_freed); + + DP(BNX2X_MSG_SP, "OCCUPANCY[%d] : s:%x\n", regs->pN, occup); + DP(BNX2X_MSG_SP, "LINES_FREED[%d] : s:%x\n", regs->pN, freed); + + while (occup && ((u32)SUB_S32(freed, freed_start) < to_free)) { + if (cur_cnt--) { + udelay(FLR_WAIT_INTERAVAL); + occup = REG_RD(bp, regs->lines_occup); + freed = REG_RD(bp, regs->lines_freed); + } else { + DP(BNX2X_MSG_SP, "PBF cmd queue[%d] timed out\n", + regs->pN); + DP(BNX2X_MSG_SP, "OCCUPANCY[%d] : s:%x\n", + regs->pN, occup); + DP(BNX2X_MSG_SP, "LINES_FREED[%d] : s:%x\n", + regs->pN, freed); + break; + } + } + DP(BNX2X_MSG_SP, "Waited %d*%d usec for PBF cmd queue[%d]\n", + poll_count-cur_cnt, FLR_WAIT_INTERAVAL, regs->pN); +} + +static inline u32 bnx2x_flr_clnup_reg_poll(struct bnx2x *bp, u32 reg, + u32 expected, u32 poll_count) +{ + u32 cur_cnt = poll_count; + u32 val; + + while ((val = REG_RD(bp, reg)) != expected && cur_cnt--) + udelay(FLR_WAIT_INTERAVAL); + + return val; +} + +static inline int bnx2x_flr_clnup_poll_hw_counter(struct bnx2x *bp, u32 reg, + char *msg, u32 poll_cnt) +{ + u32 val = bnx2x_flr_clnup_reg_poll(bp, reg, 0, poll_cnt); + if (val != 0) { + BNX2X_ERR("%s usage count=%d\n", msg, val); + return 1; + } + return 0; +} + +static u32 bnx2x_flr_clnup_poll_count(struct bnx2x *bp) +{ + /* adjust polling timeout */ + if (CHIP_REV_IS_EMUL(bp)) + return FLR_POLL_CNT * 2000; + + if (CHIP_REV_IS_FPGA(bp)) + return FLR_POLL_CNT * 120; + + return FLR_POLL_CNT; +} + +static void bnx2x_tx_hw_flushed(struct bnx2x *bp, u32 poll_count) +{ + struct pbf_pN_cmd_regs cmd_regs[] = { + {0, (CHIP_IS_E3B0(bp)) ? + PBF_REG_TQ_OCCUPANCY_Q0 : + PBF_REG_P0_TQ_OCCUPANCY, + (CHIP_IS_E3B0(bp)) ? + PBF_REG_TQ_LINES_FREED_CNT_Q0 : + PBF_REG_P0_TQ_LINES_FREED_CNT}, + {1, (CHIP_IS_E3B0(bp)) ? + PBF_REG_TQ_OCCUPANCY_Q1 : + PBF_REG_P1_TQ_OCCUPANCY, + (CHIP_IS_E3B0(bp)) ? + PBF_REG_TQ_LINES_FREED_CNT_Q1 : + PBF_REG_P1_TQ_LINES_FREED_CNT}, + {4, (CHIP_IS_E3B0(bp)) ? + PBF_REG_TQ_OCCUPANCY_LB_Q : + PBF_REG_P4_TQ_OCCUPANCY, + (CHIP_IS_E3B0(bp)) ? + PBF_REG_TQ_LINES_FREED_CNT_LB_Q : + PBF_REG_P4_TQ_LINES_FREED_CNT} + }; + + struct pbf_pN_buf_regs buf_regs[] = { + {0, (CHIP_IS_E3B0(bp)) ? + PBF_REG_INIT_CRD_Q0 : + PBF_REG_P0_INIT_CRD , + (CHIP_IS_E3B0(bp)) ? + PBF_REG_CREDIT_Q0 : + PBF_REG_P0_CREDIT, + (CHIP_IS_E3B0(bp)) ? + PBF_REG_INTERNAL_CRD_FREED_CNT_Q0 : + PBF_REG_P0_INTERNAL_CRD_FREED_CNT}, + {1, (CHIP_IS_E3B0(bp)) ? + PBF_REG_INIT_CRD_Q1 : + PBF_REG_P1_INIT_CRD, + (CHIP_IS_E3B0(bp)) ? + PBF_REG_CREDIT_Q1 : + PBF_REG_P1_CREDIT, + (CHIP_IS_E3B0(bp)) ? + PBF_REG_INTERNAL_CRD_FREED_CNT_Q1 : + PBF_REG_P1_INTERNAL_CRD_FREED_CNT}, + {4, (CHIP_IS_E3B0(bp)) ? + PBF_REG_INIT_CRD_LB_Q : + PBF_REG_P4_INIT_CRD, + (CHIP_IS_E3B0(bp)) ? + PBF_REG_CREDIT_LB_Q : + PBF_REG_P4_CREDIT, + (CHIP_IS_E3B0(bp)) ? + PBF_REG_INTERNAL_CRD_FREED_CNT_LB_Q : + PBF_REG_P4_INTERNAL_CRD_FREED_CNT}, + }; + + int i; + + /* Verify the command queues are flushed P0, P1, P4 */ + for (i = 0; i < ARRAY_SIZE(cmd_regs); i++) + bnx2x_pbf_pN_cmd_flushed(bp, &cmd_regs[i], poll_count); + + + /* Verify the transmission buffers are flushed P0, P1, P4 */ + for (i = 0; i < ARRAY_SIZE(buf_regs); i++) + bnx2x_pbf_pN_buf_flushed(bp, &buf_regs[i], poll_count); +} + +#define OP_GEN_PARAM(param) \ + (((param) << SDM_OP_GEN_COMP_PARAM_SHIFT) & SDM_OP_GEN_COMP_PARAM) + +#define OP_GEN_TYPE(type) \ + (((type) << SDM_OP_GEN_COMP_TYPE_SHIFT) & SDM_OP_GEN_COMP_TYPE) + +#define OP_GEN_AGG_VECT(index) \ + (((index) << SDM_OP_GEN_AGG_VECT_IDX_SHIFT) & SDM_OP_GEN_AGG_VECT_IDX) + + +static inline int bnx2x_send_final_clnup(struct bnx2x *bp, u8 clnup_func, + u32 poll_cnt) +{ + struct sdm_op_gen op_gen = {0}; + + u32 comp_addr = BAR_CSTRORM_INTMEM + + CSTORM_FINAL_CLEANUP_COMPLETE_OFFSET(clnup_func); + int ret = 0; + + if (REG_RD(bp, comp_addr)) { + BNX2X_ERR("Cleanup complete is not 0\n"); + return 1; + } + + op_gen.command |= OP_GEN_PARAM(XSTORM_AGG_INT_FINAL_CLEANUP_INDEX); + op_gen.command |= OP_GEN_TYPE(XSTORM_AGG_INT_FINAL_CLEANUP_COMP_TYPE); + op_gen.command |= OP_GEN_AGG_VECT(clnup_func); + op_gen.command |= 1 << SDM_OP_GEN_AGG_VECT_IDX_VALID_SHIFT; + + DP(BNX2X_MSG_SP, "FW Final cleanup\n"); + REG_WR(bp, XSDM_REG_OPERATION_GEN, op_gen.command); + + if (bnx2x_flr_clnup_reg_poll(bp, comp_addr, 1, poll_cnt) != 1) { + BNX2X_ERR("FW final cleanup did not succeed\n"); + ret = 1; + } + /* Zero completion for nxt FLR */ + REG_WR(bp, comp_addr, 0); + + return ret; +} + +static inline u8 bnx2x_is_pcie_pending(struct pci_dev *dev) +{ + int pos; + u16 status; + + pos = pci_pcie_cap(dev); + if (!pos) + return false; + + pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &status); + return status & PCI_EXP_DEVSTA_TRPND; +} + +/* PF FLR specific routines +*/ +static int bnx2x_poll_hw_usage_counters(struct bnx2x *bp, u32 poll_cnt) +{ + + /* wait for CFC PF usage-counter to zero (includes all the VFs) */ + if (bnx2x_flr_clnup_poll_hw_counter(bp, + CFC_REG_NUM_LCIDS_INSIDE_PF, + "CFC PF usage counter timed out", + poll_cnt)) + return 1; + + + /* Wait for DQ PF usage-counter to zero (until DQ cleanup) */ + if (bnx2x_flr_clnup_poll_hw_counter(bp, + DORQ_REG_PF_USAGE_CNT, + "DQ PF usage counter timed out", + poll_cnt)) + return 1; + + /* Wait for QM PF usage-counter to zero (until DQ cleanup) */ + if (bnx2x_flr_clnup_poll_hw_counter(bp, + QM_REG_PF_USG_CNT_0 + 4*BP_FUNC(bp), + "QM PF usage counter timed out", + poll_cnt)) + return 1; + + /* Wait for Timer PF usage-counters to zero (until DQ cleanup) */ + if (bnx2x_flr_clnup_poll_hw_counter(bp, + TM_REG_LIN0_VNIC_UC + 4*BP_PORT(bp), + "Timers VNIC usage counter timed out", + poll_cnt)) + return 1; + if (bnx2x_flr_clnup_poll_hw_counter(bp, + TM_REG_LIN0_NUM_SCANS + 4*BP_PORT(bp), + "Timers NUM_SCANS usage counter timed out", + poll_cnt)) + return 1; + + /* Wait DMAE PF usage counter to zero */ + if (bnx2x_flr_clnup_poll_hw_counter(bp, + dmae_reg_go_c[INIT_DMAE_C(bp)], + "DMAE dommand register timed out", + poll_cnt)) + return 1; + + return 0; +} + +static void bnx2x_hw_enable_status(struct bnx2x *bp) +{ + u32 val; + + val = REG_RD(bp, CFC_REG_WEAK_ENABLE_PF); + DP(BNX2X_MSG_SP, "CFC_REG_WEAK_ENABLE_PF is 0x%x\n", val); + + val = REG_RD(bp, PBF_REG_DISABLE_PF); + DP(BNX2X_MSG_SP, "PBF_REG_DISABLE_PF is 0x%x\n", val); + + val = REG_RD(bp, IGU_REG_PCI_PF_MSI_EN); + DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSI_EN is 0x%x\n", val); + + val = REG_RD(bp, IGU_REG_PCI_PF_MSIX_EN); + DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSIX_EN is 0x%x\n", val); + + val = REG_RD(bp, IGU_REG_PCI_PF_MSIX_FUNC_MASK); + DP(BNX2X_MSG_SP, "IGU_REG_PCI_PF_MSIX_FUNC_MASK is 0x%x\n", val); + + val = REG_RD(bp, PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR); + DP(BNX2X_MSG_SP, "PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR is 0x%x\n", val); + + val = REG_RD(bp, PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR); + DP(BNX2X_MSG_SP, "PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR is 0x%x\n", val); + + val = REG_RD(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER); + DP(BNX2X_MSG_SP, "PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER is 0x%x\n", + val); +} + +static int bnx2x_pf_flr_clnup(struct bnx2x *bp) +{ + u32 poll_cnt = bnx2x_flr_clnup_poll_count(bp); + + DP(BNX2X_MSG_SP, "Cleanup after FLR PF[%d]\n", BP_ABS_FUNC(bp)); + + /* Re-enable PF target read access */ + REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1); + + /* Poll HW usage counters */ + if (bnx2x_poll_hw_usage_counters(bp, poll_cnt)) + return -EBUSY; + + /* Zero the igu 'trailing edge' and 'leading edge' */ + + /* Send the FW cleanup command */ + if (bnx2x_send_final_clnup(bp, (u8)BP_FUNC(bp), poll_cnt)) + return -EBUSY; + + /* ATC cleanup */ + + /* Verify TX hw is flushed */ + bnx2x_tx_hw_flushed(bp, poll_cnt); + + /* Wait 100ms (not adjusted according to platform) */ + msleep(100); + + /* Verify no pending pci transactions */ + if (bnx2x_is_pcie_pending(bp->pdev)) + BNX2X_ERR("PCIE Transactions still pending\n"); + + /* Debug */ + bnx2x_hw_enable_status(bp); + + /* + * Master enable - Due to WB DMAE writes performed before this + * register is re-initialized as part of the regular function init + */ + REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1); + + return 0; +} + +static void bnx2x_hc_int_enable(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0; + u32 val = REG_RD(bp, addr); + int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0; + int msi = (bp->flags & USING_MSI_FLAG) ? 1 : 0; + + if (msix) { + val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | + HC_CONFIG_0_REG_INT_LINE_EN_0); + val |= (HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 | + HC_CONFIG_0_REG_ATTN_BIT_EN_0); + } else if (msi) { + val &= ~HC_CONFIG_0_REG_INT_LINE_EN_0; + val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | + HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 | + HC_CONFIG_0_REG_ATTN_BIT_EN_0); + } else { + val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | + HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 | + HC_CONFIG_0_REG_INT_LINE_EN_0 | + HC_CONFIG_0_REG_ATTN_BIT_EN_0); + + if (!CHIP_IS_E1(bp)) { + DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x)\n", + val, port, addr); + + REG_WR(bp, addr, val); + + val &= ~HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0; + } + } + + if (CHIP_IS_E1(bp)) + REG_WR(bp, HC_REG_INT_MASK + port*4, 0x1FFFF); + + DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x) mode %s\n", + val, port, addr, (msix ? "MSI-X" : (msi ? "MSI" : "INTx"))); + + REG_WR(bp, addr, val); + /* + * Ensure that HC_CONFIG is written before leading/trailing edge config + */ + mmiowb(); + barrier(); + + if (!CHIP_IS_E1(bp)) { + /* init leading/trailing edge */ + if (IS_MF(bp)) { + val = (0xee0f | (1 << (BP_VN(bp) + 4))); + if (bp->port.pmf) + /* enable nig and gpio3 attention */ + val |= 0x1100; + } else + val = 0xffff; + + REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val); + REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val); + } + + /* Make sure that interrupts are indeed enabled from here on */ + mmiowb(); +} + +static void bnx2x_igu_int_enable(struct bnx2x *bp) +{ + u32 val; + int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0; + int msi = (bp->flags & USING_MSI_FLAG) ? 1 : 0; + + val = REG_RD(bp, IGU_REG_PF_CONFIGURATION); + + if (msix) { + val &= ~(IGU_PF_CONF_INT_LINE_EN | + IGU_PF_CONF_SINGLE_ISR_EN); + val |= (IGU_PF_CONF_FUNC_EN | + IGU_PF_CONF_MSI_MSIX_EN | + IGU_PF_CONF_ATTN_BIT_EN); + } else if (msi) { + val &= ~IGU_PF_CONF_INT_LINE_EN; + val |= (IGU_PF_CONF_FUNC_EN | + IGU_PF_CONF_MSI_MSIX_EN | + IGU_PF_CONF_ATTN_BIT_EN | + IGU_PF_CONF_SINGLE_ISR_EN); + } else { + val &= ~IGU_PF_CONF_MSI_MSIX_EN; + val |= (IGU_PF_CONF_FUNC_EN | + IGU_PF_CONF_INT_LINE_EN | + IGU_PF_CONF_ATTN_BIT_EN | + IGU_PF_CONF_SINGLE_ISR_EN); + } + + DP(NETIF_MSG_INTR, "write 0x%x to IGU mode %s\n", + val, (msix ? "MSI-X" : (msi ? "MSI" : "INTx"))); + + REG_WR(bp, IGU_REG_PF_CONFIGURATION, val); + + barrier(); + + /* init leading/trailing edge */ + if (IS_MF(bp)) { + val = (0xee0f | (1 << (BP_VN(bp) + 4))); + if (bp->port.pmf) + /* enable nig and gpio3 attention */ + val |= 0x1100; + } else + val = 0xffff; + + REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, val); + REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, val); + + /* Make sure that interrupts are indeed enabled from here on */ + mmiowb(); +} + +void bnx2x_int_enable(struct bnx2x *bp) +{ + if (bp->common.int_block == INT_BLOCK_HC) + bnx2x_hc_int_enable(bp); + else + bnx2x_igu_int_enable(bp); +} + +static void bnx2x_hc_int_disable(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0; + u32 val = REG_RD(bp, addr); + + /* + * in E1 we must use only PCI configuration space to disable + * MSI/MSIX capablility + * It's forbitten to disable IGU_PF_CONF_MSI_MSIX_EN in HC block + */ + if (CHIP_IS_E1(bp)) { + /* Since IGU_PF_CONF_MSI_MSIX_EN still always on + * Use mask register to prevent from HC sending interrupts + * after we exit the function + */ + REG_WR(bp, HC_REG_INT_MASK + port*4, 0); + + val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | + HC_CONFIG_0_REG_INT_LINE_EN_0 | + HC_CONFIG_0_REG_ATTN_BIT_EN_0); + } else + val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | + HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 | + HC_CONFIG_0_REG_INT_LINE_EN_0 | + HC_CONFIG_0_REG_ATTN_BIT_EN_0); + + DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x)\n", + val, port, addr); + + /* flush all outstanding writes */ + mmiowb(); + + REG_WR(bp, addr, val); + if (REG_RD(bp, addr) != val) + BNX2X_ERR("BUG! proper val not read from IGU!\n"); +} + +static void bnx2x_igu_int_disable(struct bnx2x *bp) +{ + u32 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION); + + val &= ~(IGU_PF_CONF_MSI_MSIX_EN | + IGU_PF_CONF_INT_LINE_EN | + IGU_PF_CONF_ATTN_BIT_EN); + + DP(NETIF_MSG_INTR, "write %x to IGU\n", val); + + /* flush all outstanding writes */ + mmiowb(); + + REG_WR(bp, IGU_REG_PF_CONFIGURATION, val); + if (REG_RD(bp, IGU_REG_PF_CONFIGURATION) != val) + BNX2X_ERR("BUG! proper val not read from IGU!\n"); +} + +void bnx2x_int_disable(struct bnx2x *bp) +{ + if (bp->common.int_block == INT_BLOCK_HC) + bnx2x_hc_int_disable(bp); + else + bnx2x_igu_int_disable(bp); +} + +void bnx2x_int_disable_sync(struct bnx2x *bp, int disable_hw) +{ + int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0; + int i, offset; + + if (disable_hw) + /* prevent the HW from sending interrupts */ + bnx2x_int_disable(bp); + + /* make sure all ISRs are done */ + if (msix) { + synchronize_irq(bp->msix_table[0].vector); + offset = 1; +#ifdef BCM_CNIC + offset++; +#endif + for_each_eth_queue(bp, i) + synchronize_irq(bp->msix_table[offset++].vector); + } else + synchronize_irq(bp->pdev->irq); + + /* make sure sp_task is not running */ + cancel_delayed_work(&bp->sp_task); + cancel_delayed_work(&bp->period_task); + flush_workqueue(bnx2x_wq); +} + +/* fast path */ + +/* + * General service functions + */ + +/* Return true if succeeded to acquire the lock */ +static bool bnx2x_trylock_hw_lock(struct bnx2x *bp, u32 resource) +{ + u32 lock_status; + u32 resource_bit = (1 << resource); + int func = BP_FUNC(bp); + u32 hw_lock_control_reg; + + DP(NETIF_MSG_HW, "Trying to take a lock on resource %d\n", resource); + + /* Validating that the resource is within range */ + if (resource > HW_LOCK_MAX_RESOURCE_VALUE) { + DP(NETIF_MSG_HW, + "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n", + resource, HW_LOCK_MAX_RESOURCE_VALUE); + return false; + } + + if (func <= 5) + hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8); + else + hw_lock_control_reg = + (MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8); + + /* Try to acquire the lock */ + REG_WR(bp, hw_lock_control_reg + 4, resource_bit); + lock_status = REG_RD(bp, hw_lock_control_reg); + if (lock_status & resource_bit) + return true; + + DP(NETIF_MSG_HW, "Failed to get a lock on resource %d\n", resource); + return false; +} + +/** + * bnx2x_get_leader_lock_resource - get the recovery leader resource id + * + * @bp: driver handle + * + * Returns the recovery leader resource id according to the engine this function + * belongs to. Currently only only 2 engines is supported. + */ +static inline int bnx2x_get_leader_lock_resource(struct bnx2x *bp) +{ + if (BP_PATH(bp)) + return HW_LOCK_RESOURCE_RECOVERY_LEADER_1; + else + return HW_LOCK_RESOURCE_RECOVERY_LEADER_0; +} + +/** + * bnx2x_trylock_leader_lock- try to aquire a leader lock. + * + * @bp: driver handle + * + * Tries to aquire a leader lock for cuurent engine. + */ +static inline bool bnx2x_trylock_leader_lock(struct bnx2x *bp) +{ + return bnx2x_trylock_hw_lock(bp, bnx2x_get_leader_lock_resource(bp)); +} + +#ifdef BCM_CNIC +static void bnx2x_cnic_cfc_comp(struct bnx2x *bp, int cid, u8 err); +#endif + +void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe) +{ + struct bnx2x *bp = fp->bp; + int cid = SW_CID(rr_cqe->ramrod_cqe.conn_and_cmd_data); + int command = CQE_CMD(rr_cqe->ramrod_cqe.conn_and_cmd_data); + enum bnx2x_queue_cmd drv_cmd = BNX2X_Q_CMD_MAX; + struct bnx2x_queue_sp_obj *q_obj = &fp->q_obj; + + DP(BNX2X_MSG_SP, + "fp %d cid %d got ramrod #%d state is %x type is %d\n", + fp->index, cid, command, bp->state, + rr_cqe->ramrod_cqe.ramrod_type); + + switch (command) { + case (RAMROD_CMD_ID_ETH_CLIENT_UPDATE): + DP(BNX2X_MSG_SP, "got UPDATE ramrod. CID %d\n", cid); + drv_cmd = BNX2X_Q_CMD_UPDATE; + break; + + case (RAMROD_CMD_ID_ETH_CLIENT_SETUP): + DP(BNX2X_MSG_SP, "got MULTI[%d] setup ramrod\n", cid); + drv_cmd = BNX2X_Q_CMD_SETUP; + break; + + case (RAMROD_CMD_ID_ETH_TX_QUEUE_SETUP): + DP(NETIF_MSG_IFUP, "got MULTI[%d] tx-only setup ramrod\n", cid); + drv_cmd = BNX2X_Q_CMD_SETUP_TX_ONLY; + break; + + case (RAMROD_CMD_ID_ETH_HALT): + DP(BNX2X_MSG_SP, "got MULTI[%d] halt ramrod\n", cid); + drv_cmd = BNX2X_Q_CMD_HALT; + break; + + case (RAMROD_CMD_ID_ETH_TERMINATE): + DP(BNX2X_MSG_SP, "got MULTI[%d] teminate ramrod\n", cid); + drv_cmd = BNX2X_Q_CMD_TERMINATE; + break; + + case (RAMROD_CMD_ID_ETH_EMPTY): + DP(BNX2X_MSG_SP, "got MULTI[%d] empty ramrod\n", cid); + drv_cmd = BNX2X_Q_CMD_EMPTY; + break; + + default: + BNX2X_ERR("unexpected MC reply (%d) on fp[%d]\n", + command, fp->index); + return; + } + + if ((drv_cmd != BNX2X_Q_CMD_MAX) && + q_obj->complete_cmd(bp, q_obj, drv_cmd)) + /* q_obj->complete_cmd() failure means that this was + * an unexpected completion. + * + * In this case we don't want to increase the bp->spq_left + * because apparently we haven't sent this command the first + * place. + */ +#ifdef BNX2X_STOP_ON_ERROR + bnx2x_panic(); +#else + return; +#endif + + smp_mb__before_atomic_inc(); + atomic_inc(&bp->cq_spq_left); + /* push the change in bp->spq_left and towards the memory */ + smp_mb__after_atomic_inc(); + + DP(BNX2X_MSG_SP, "bp->cq_spq_left %x\n", atomic_read(&bp->cq_spq_left)); + + return; +} + +void bnx2x_update_rx_prod(struct bnx2x *bp, struct bnx2x_fastpath *fp, + u16 bd_prod, u16 rx_comp_prod, u16 rx_sge_prod) +{ + u32 start = BAR_USTRORM_INTMEM + fp->ustorm_rx_prods_offset; + + bnx2x_update_rx_prod_gen(bp, fp, bd_prod, rx_comp_prod, rx_sge_prod, + start); +} + +irqreturn_t bnx2x_interrupt(int irq, void *dev_instance) +{ + struct bnx2x *bp = netdev_priv(dev_instance); + u16 status = bnx2x_ack_int(bp); + u16 mask; + int i; + u8 cos; + + /* Return here if interrupt is shared and it's not for us */ + if (unlikely(status == 0)) { + DP(NETIF_MSG_INTR, "not our interrupt!\n"); + return IRQ_NONE; + } + DP(NETIF_MSG_INTR, "got an interrupt status 0x%x\n", status); + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) + return IRQ_HANDLED; +#endif + + for_each_eth_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + + mask = 0x2 << (fp->index + CNIC_PRESENT); + if (status & mask) { + /* Handle Rx or Tx according to SB id */ + prefetch(fp->rx_cons_sb); + for_each_cos_in_tx_queue(fp, cos) + prefetch(fp->txdata[cos].tx_cons_sb); + prefetch(&fp->sb_running_index[SM_RX_ID]); + napi_schedule(&bnx2x_fp(bp, fp->index, napi)); + status &= ~mask; + } + } + +#ifdef BCM_CNIC + mask = 0x2; + if (status & (mask | 0x1)) { + struct cnic_ops *c_ops = NULL; + + if (likely(bp->state == BNX2X_STATE_OPEN)) { + rcu_read_lock(); + c_ops = rcu_dereference(bp->cnic_ops); + if (c_ops) + c_ops->cnic_handler(bp->cnic_data, NULL); + rcu_read_unlock(); + } + + status &= ~mask; + } +#endif + + if (unlikely(status & 0x1)) { + queue_delayed_work(bnx2x_wq, &bp->sp_task, 0); + + status &= ~0x1; + if (!status) + return IRQ_HANDLED; + } + + if (unlikely(status)) + DP(NETIF_MSG_INTR, "got an unknown interrupt! (status 0x%x)\n", + status); + + return IRQ_HANDLED; +} + +/* Link */ + +/* + * General service functions + */ + +int bnx2x_acquire_hw_lock(struct bnx2x *bp, u32 resource) +{ + u32 lock_status; + u32 resource_bit = (1 << resource); + int func = BP_FUNC(bp); + u32 hw_lock_control_reg; + int cnt; + + /* Validating that the resource is within range */ + if (resource > HW_LOCK_MAX_RESOURCE_VALUE) { + DP(NETIF_MSG_HW, + "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n", + resource, HW_LOCK_MAX_RESOURCE_VALUE); + return -EINVAL; + } + + if (func <= 5) { + hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8); + } else { + hw_lock_control_reg = + (MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8); + } + + /* Validating that the resource is not already taken */ + lock_status = REG_RD(bp, hw_lock_control_reg); + if (lock_status & resource_bit) { + DP(NETIF_MSG_HW, "lock_status 0x%x resource_bit 0x%x\n", + lock_status, resource_bit); + return -EEXIST; + } + + /* Try for 5 second every 5ms */ + for (cnt = 0; cnt < 1000; cnt++) { + /* Try to acquire the lock */ + REG_WR(bp, hw_lock_control_reg + 4, resource_bit); + lock_status = REG_RD(bp, hw_lock_control_reg); + if (lock_status & resource_bit) + return 0; + + msleep(5); + } + DP(NETIF_MSG_HW, "Timeout\n"); + return -EAGAIN; +} + +int bnx2x_release_leader_lock(struct bnx2x *bp) +{ + return bnx2x_release_hw_lock(bp, bnx2x_get_leader_lock_resource(bp)); +} + +int bnx2x_release_hw_lock(struct bnx2x *bp, u32 resource) +{ + u32 lock_status; + u32 resource_bit = (1 << resource); + int func = BP_FUNC(bp); + u32 hw_lock_control_reg; + + DP(NETIF_MSG_HW, "Releasing a lock on resource %d\n", resource); + + /* Validating that the resource is within range */ + if (resource > HW_LOCK_MAX_RESOURCE_VALUE) { + DP(NETIF_MSG_HW, + "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n", + resource, HW_LOCK_MAX_RESOURCE_VALUE); + return -EINVAL; + } + + if (func <= 5) { + hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8); + } else { + hw_lock_control_reg = + (MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8); + } + + /* Validating that the resource is currently taken */ + lock_status = REG_RD(bp, hw_lock_control_reg); + if (!(lock_status & resource_bit)) { + DP(NETIF_MSG_HW, "lock_status 0x%x resource_bit 0x%x\n", + lock_status, resource_bit); + return -EFAULT; + } + + REG_WR(bp, hw_lock_control_reg, resource_bit); + return 0; +} + + +int bnx2x_get_gpio(struct bnx2x *bp, int gpio_num, u8 port) +{ + /* The GPIO should be swapped if swap register is set and active */ + int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) && + REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port; + int gpio_shift = gpio_num + + (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0); + u32 gpio_mask = (1 << gpio_shift); + u32 gpio_reg; + int value; + + if (gpio_num > MISC_REGISTERS_GPIO_3) { + BNX2X_ERR("Invalid GPIO %d\n", gpio_num); + return -EINVAL; + } + + /* read GPIO value */ + gpio_reg = REG_RD(bp, MISC_REG_GPIO); + + /* get the requested pin value */ + if ((gpio_reg & gpio_mask) == gpio_mask) + value = 1; + else + value = 0; + + DP(NETIF_MSG_LINK, "pin %d value 0x%x\n", gpio_num, value); + + return value; +} + +int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port) +{ + /* The GPIO should be swapped if swap register is set and active */ + int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) && + REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port; + int gpio_shift = gpio_num + + (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0); + u32 gpio_mask = (1 << gpio_shift); + u32 gpio_reg; + + if (gpio_num > MISC_REGISTERS_GPIO_3) { + BNX2X_ERR("Invalid GPIO %d\n", gpio_num); + return -EINVAL; + } + + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); + /* read GPIO and mask except the float bits */ + gpio_reg = (REG_RD(bp, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT); + + switch (mode) { + case MISC_REGISTERS_GPIO_OUTPUT_LOW: + DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output low\n", + gpio_num, gpio_shift); + /* clear FLOAT and set CLR */ + gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS); + break; + + case MISC_REGISTERS_GPIO_OUTPUT_HIGH: + DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output high\n", + gpio_num, gpio_shift); + /* clear FLOAT and set SET */ + gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_SET_POS); + break; + + case MISC_REGISTERS_GPIO_INPUT_HI_Z: + DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> input\n", + gpio_num, gpio_shift); + /* set FLOAT */ + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); + break; + + default: + break; + } + + REG_WR(bp, MISC_REG_GPIO, gpio_reg); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); + + return 0; +} + +int bnx2x_set_mult_gpio(struct bnx2x *bp, u8 pins, u32 mode) +{ + u32 gpio_reg = 0; + int rc = 0; + + /* Any port swapping should be handled by caller. */ + + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); + /* read GPIO and mask except the float bits */ + gpio_reg = REG_RD(bp, MISC_REG_GPIO); + gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_FLOAT_POS); + gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_CLR_POS); + gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_SET_POS); + + switch (mode) { + case MISC_REGISTERS_GPIO_OUTPUT_LOW: + DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> output low\n", pins); + /* set CLR */ + gpio_reg |= (pins << MISC_REGISTERS_GPIO_CLR_POS); + break; + + case MISC_REGISTERS_GPIO_OUTPUT_HIGH: + DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> output high\n", pins); + /* set SET */ + gpio_reg |= (pins << MISC_REGISTERS_GPIO_SET_POS); + break; + + case MISC_REGISTERS_GPIO_INPUT_HI_Z: + DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> input\n", pins); + /* set FLOAT */ + gpio_reg |= (pins << MISC_REGISTERS_GPIO_FLOAT_POS); + break; + + default: + BNX2X_ERR("Invalid GPIO mode assignment %d\n", mode); + rc = -EINVAL; + break; + } + + if (rc == 0) + REG_WR(bp, MISC_REG_GPIO, gpio_reg); + + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); + + return rc; +} + +int bnx2x_set_gpio_int(struct bnx2x *bp, int gpio_num, u32 mode, u8 port) +{ + /* The GPIO should be swapped if swap register is set and active */ + int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) && + REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port; + int gpio_shift = gpio_num + + (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0); + u32 gpio_mask = (1 << gpio_shift); + u32 gpio_reg; + + if (gpio_num > MISC_REGISTERS_GPIO_3) { + BNX2X_ERR("Invalid GPIO %d\n", gpio_num); + return -EINVAL; + } + + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); + /* read GPIO int */ + gpio_reg = REG_RD(bp, MISC_REG_GPIO_INT); + + switch (mode) { + case MISC_REGISTERS_GPIO_INT_OUTPUT_CLR: + DP(NETIF_MSG_LINK, "Clear GPIO INT %d (shift %d) -> " + "output low\n", gpio_num, gpio_shift); + /* clear SET and set CLR */ + gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS); + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS); + break; + + case MISC_REGISTERS_GPIO_INT_OUTPUT_SET: + DP(NETIF_MSG_LINK, "Set GPIO INT %d (shift %d) -> " + "output high\n", gpio_num, gpio_shift); + /* clear CLR and set SET */ + gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS); + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS); + break; + + default: + break; + } + + REG_WR(bp, MISC_REG_GPIO_INT, gpio_reg); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); + + return 0; +} + +static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode) +{ + u32 spio_mask = (1 << spio_num); + u32 spio_reg; + + if ((spio_num < MISC_REGISTERS_SPIO_4) || + (spio_num > MISC_REGISTERS_SPIO_7)) { + BNX2X_ERR("Invalid SPIO %d\n", spio_num); + return -EINVAL; + } + + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_SPIO); + /* read SPIO and mask except the float bits */ + spio_reg = (REG_RD(bp, MISC_REG_SPIO) & MISC_REGISTERS_SPIO_FLOAT); + + switch (mode) { + case MISC_REGISTERS_SPIO_OUTPUT_LOW: + DP(NETIF_MSG_LINK, "Set SPIO %d -> output low\n", spio_num); + /* clear FLOAT and set CLR */ + spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS); + spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_CLR_POS); + break; + + case MISC_REGISTERS_SPIO_OUTPUT_HIGH: + DP(NETIF_MSG_LINK, "Set SPIO %d -> output high\n", spio_num); + /* clear FLOAT and set SET */ + spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS); + spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_SET_POS); + break; + + case MISC_REGISTERS_SPIO_INPUT_HI_Z: + DP(NETIF_MSG_LINK, "Set SPIO %d -> input\n", spio_num); + /* set FLOAT */ + spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS); + break; + + default: + break; + } + + REG_WR(bp, MISC_REG_SPIO, spio_reg); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_SPIO); + + return 0; +} + +void bnx2x_calc_fc_adv(struct bnx2x *bp) +{ + u8 cfg_idx = bnx2x_get_link_cfg_idx(bp); + switch (bp->link_vars.ieee_fc & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) { + case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE: + bp->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause | + ADVERTISED_Pause); + break; + + case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH: + bp->port.advertising[cfg_idx] |= (ADVERTISED_Asym_Pause | + ADVERTISED_Pause); + break; + + case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC: + bp->port.advertising[cfg_idx] |= ADVERTISED_Asym_Pause; + break; + + default: + bp->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause | + ADVERTISED_Pause); + break; + } +} + +u8 bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode) +{ + if (!BP_NOMCP(bp)) { + u8 rc; + int cfx_idx = bnx2x_get_link_cfg_idx(bp); + u16 req_line_speed = bp->link_params.req_line_speed[cfx_idx]; + /* + * Initialize link parameters structure variables + * It is recommended to turn off RX FC for jumbo frames + * for better performance + */ + if (CHIP_IS_E1x(bp) && (bp->dev->mtu > 5000)) + bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_TX; + else + bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_BOTH; + + bnx2x_acquire_phy_lock(bp); + + if (load_mode == LOAD_DIAG) { + struct link_params *lp = &bp->link_params; + lp->loopback_mode = LOOPBACK_XGXS; + /* do PHY loopback at 10G speed, if possible */ + if (lp->req_line_speed[cfx_idx] < SPEED_10000) { + if (lp->speed_cap_mask[cfx_idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) + lp->req_line_speed[cfx_idx] = + SPEED_10000; + else + lp->req_line_speed[cfx_idx] = + SPEED_1000; + } + } + + rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars); + + bnx2x_release_phy_lock(bp); + + bnx2x_calc_fc_adv(bp); + + if (CHIP_REV_IS_SLOW(bp) && bp->link_vars.link_up) { + bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP); + bnx2x_link_report(bp); + } else + queue_delayed_work(bnx2x_wq, &bp->period_task, 0); + bp->link_params.req_line_speed[cfx_idx] = req_line_speed; + return rc; + } + BNX2X_ERR("Bootcode is missing - can not initialize link\n"); + return -EINVAL; +} + +void bnx2x_link_set(struct bnx2x *bp) +{ + if (!BP_NOMCP(bp)) { + bnx2x_acquire_phy_lock(bp); + bnx2x_link_reset(&bp->link_params, &bp->link_vars, 1); + bnx2x_phy_init(&bp->link_params, &bp->link_vars); + bnx2x_release_phy_lock(bp); + + bnx2x_calc_fc_adv(bp); + } else + BNX2X_ERR("Bootcode is missing - can not set link\n"); +} + +static void bnx2x__link_reset(struct bnx2x *bp) +{ + if (!BP_NOMCP(bp)) { + bnx2x_acquire_phy_lock(bp); + bnx2x_link_reset(&bp->link_params, &bp->link_vars, 1); + bnx2x_release_phy_lock(bp); + } else + BNX2X_ERR("Bootcode is missing - can not reset link\n"); +} + +u8 bnx2x_link_test(struct bnx2x *bp, u8 is_serdes) +{ + u8 rc = 0; + + if (!BP_NOMCP(bp)) { + bnx2x_acquire_phy_lock(bp); + rc = bnx2x_test_link(&bp->link_params, &bp->link_vars, + is_serdes); + bnx2x_release_phy_lock(bp); + } else + BNX2X_ERR("Bootcode is missing - can not test link\n"); + + return rc; +} + +static void bnx2x_init_port_minmax(struct bnx2x *bp) +{ + u32 r_param = bp->link_vars.line_speed / 8; + u32 fair_periodic_timeout_usec; + u32 t_fair; + + memset(&(bp->cmng.rs_vars), 0, + sizeof(struct rate_shaping_vars_per_port)); + memset(&(bp->cmng.fair_vars), 0, sizeof(struct fairness_vars_per_port)); + + /* 100 usec in SDM ticks = 25 since each tick is 4 usec */ + bp->cmng.rs_vars.rs_periodic_timeout = RS_PERIODIC_TIMEOUT_USEC / 4; + + /* this is the threshold below which no timer arming will occur + 1.25 coefficient is for the threshold to be a little bigger + than the real time, to compensate for timer in-accuracy */ + bp->cmng.rs_vars.rs_threshold = + (RS_PERIODIC_TIMEOUT_USEC * r_param * 5) / 4; + + /* resolution of fairness timer */ + fair_periodic_timeout_usec = QM_ARB_BYTES / r_param; + /* for 10G it is 1000usec. for 1G it is 10000usec. */ + t_fair = T_FAIR_COEF / bp->link_vars.line_speed; + + /* this is the threshold below which we won't arm the timer anymore */ + bp->cmng.fair_vars.fair_threshold = QM_ARB_BYTES; + + /* we multiply by 1e3/8 to get bytes/msec. + We don't want the credits to pass a credit + of the t_fair*FAIR_MEM (algorithm resolution) */ + bp->cmng.fair_vars.upper_bound = r_param * t_fair * FAIR_MEM; + /* since each tick is 4 usec */ + bp->cmng.fair_vars.fairness_timeout = fair_periodic_timeout_usec / 4; +} + +/* Calculates the sum of vn_min_rates. + It's needed for further normalizing of the min_rates. + Returns: + sum of vn_min_rates. + or + 0 - if all the min_rates are 0. + In the later case fainess algorithm should be deactivated. + If not all min_rates are zero then those that are zeroes will be set to 1. + */ +static void bnx2x_calc_vn_weight_sum(struct bnx2x *bp) +{ + int all_zero = 1; + int vn; + + bp->vn_weight_sum = 0; + for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) { + u32 vn_cfg = bp->mf_config[vn]; + u32 vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >> + FUNC_MF_CFG_MIN_BW_SHIFT) * 100; + + /* Skip hidden vns */ + if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) + continue; + + /* If min rate is zero - set it to 1 */ + if (!vn_min_rate) + vn_min_rate = DEF_MIN_RATE; + else + all_zero = 0; + + bp->vn_weight_sum += vn_min_rate; + } + + /* if ETS or all min rates are zeros - disable fairness */ + if (BNX2X_IS_ETS_ENABLED(bp)) { + bp->cmng.flags.cmng_enables &= + ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN; + DP(NETIF_MSG_IFUP, "Fairness will be disabled due to ETS\n"); + } else if (all_zero) { + bp->cmng.flags.cmng_enables &= + ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN; + DP(NETIF_MSG_IFUP, "All MIN values are zeroes" + " fairness will be disabled\n"); + } else + bp->cmng.flags.cmng_enables |= + CMNG_FLAGS_PER_PORT_FAIRNESS_VN; +} + +/* returns func by VN for current port */ +static inline int func_by_vn(struct bnx2x *bp, int vn) +{ + return 2 * vn + BP_PORT(bp); +} + +static void bnx2x_init_vn_minmax(struct bnx2x *bp, int vn) +{ + struct rate_shaping_vars_per_vn m_rs_vn; + struct fairness_vars_per_vn m_fair_vn; + u32 vn_cfg = bp->mf_config[vn]; + int func = func_by_vn(bp, vn); + u16 vn_min_rate, vn_max_rate; + int i; + + /* If function is hidden - set min and max to zeroes */ + if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) { + vn_min_rate = 0; + vn_max_rate = 0; + + } else { + u32 maxCfg = bnx2x_extract_max_cfg(bp, vn_cfg); + + vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >> + FUNC_MF_CFG_MIN_BW_SHIFT) * 100; + /* If fairness is enabled (not all min rates are zeroes) and + if current min rate is zero - set it to 1. + This is a requirement of the algorithm. */ + if (bp->vn_weight_sum && (vn_min_rate == 0)) + vn_min_rate = DEF_MIN_RATE; + + if (IS_MF_SI(bp)) + /* maxCfg in percents of linkspeed */ + vn_max_rate = (bp->link_vars.line_speed * maxCfg) / 100; + else + /* maxCfg is absolute in 100Mb units */ + vn_max_rate = maxCfg * 100; + } + + DP(NETIF_MSG_IFUP, + "func %d: vn_min_rate %d vn_max_rate %d vn_weight_sum %d\n", + func, vn_min_rate, vn_max_rate, bp->vn_weight_sum); + + memset(&m_rs_vn, 0, sizeof(struct rate_shaping_vars_per_vn)); + memset(&m_fair_vn, 0, sizeof(struct fairness_vars_per_vn)); + + /* global vn counter - maximal Mbps for this vn */ + m_rs_vn.vn_counter.rate = vn_max_rate; + + /* quota - number of bytes transmitted in this period */ + m_rs_vn.vn_counter.quota = + (vn_max_rate * RS_PERIODIC_TIMEOUT_USEC) / 8; + + if (bp->vn_weight_sum) { + /* credit for each period of the fairness algorithm: + number of bytes in T_FAIR (the vn share the port rate). + vn_weight_sum should not be larger than 10000, thus + T_FAIR_COEF / (8 * vn_weight_sum) will always be greater + than zero */ + m_fair_vn.vn_credit_delta = + max_t(u32, (vn_min_rate * (T_FAIR_COEF / + (8 * bp->vn_weight_sum))), + (bp->cmng.fair_vars.fair_threshold + + MIN_ABOVE_THRESH)); + DP(NETIF_MSG_IFUP, "m_fair_vn.vn_credit_delta %d\n", + m_fair_vn.vn_credit_delta); + } + + /* Store it to internal memory */ + for (i = 0; i < sizeof(struct rate_shaping_vars_per_vn)/4; i++) + REG_WR(bp, BAR_XSTRORM_INTMEM + + XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(func) + i * 4, + ((u32 *)(&m_rs_vn))[i]); + + for (i = 0; i < sizeof(struct fairness_vars_per_vn)/4; i++) + REG_WR(bp, BAR_XSTRORM_INTMEM + + XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(func) + i * 4, + ((u32 *)(&m_fair_vn))[i]); +} + +static int bnx2x_get_cmng_fns_mode(struct bnx2x *bp) +{ + if (CHIP_REV_IS_SLOW(bp)) + return CMNG_FNS_NONE; + if (IS_MF(bp)) + return CMNG_FNS_MINMAX; + + return CMNG_FNS_NONE; +} + +void bnx2x_read_mf_cfg(struct bnx2x *bp) +{ + int vn, n = (CHIP_MODE_IS_4_PORT(bp) ? 2 : 1); + + if (BP_NOMCP(bp)) + return; /* what should be the default bvalue in this case */ + + /* For 2 port configuration the absolute function number formula + * is: + * abs_func = 2 * vn + BP_PORT + BP_PATH + * + * and there are 4 functions per port + * + * For 4 port configuration it is + * abs_func = 4 * vn + 2 * BP_PORT + BP_PATH + * + * and there are 2 functions per port + */ + for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) { + int /*abs*/func = n * (2 * vn + BP_PORT(bp)) + BP_PATH(bp); + + if (func >= E1H_FUNC_MAX) + break; + + bp->mf_config[vn] = + MF_CFG_RD(bp, func_mf_config[func].config); + } +} + +static void bnx2x_cmng_fns_init(struct bnx2x *bp, u8 read_cfg, u8 cmng_type) +{ + + if (cmng_type == CMNG_FNS_MINMAX) { + int vn; + + /* clear cmng_enables */ + bp->cmng.flags.cmng_enables = 0; + + /* read mf conf from shmem */ + if (read_cfg) + bnx2x_read_mf_cfg(bp); + + /* Init rate shaping and fairness contexts */ + bnx2x_init_port_minmax(bp); + + /* vn_weight_sum and enable fairness if not 0 */ + bnx2x_calc_vn_weight_sum(bp); + + /* calculate and set min-max rate for each vn */ + if (bp->port.pmf) + for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) + bnx2x_init_vn_minmax(bp, vn); + + /* always enable rate shaping and fairness */ + bp->cmng.flags.cmng_enables |= + CMNG_FLAGS_PER_PORT_RATE_SHAPING_VN; + if (!bp->vn_weight_sum) + DP(NETIF_MSG_IFUP, "All MIN values are zeroes" + " fairness will be disabled\n"); + return; + } + + /* rate shaping and fairness are disabled */ + DP(NETIF_MSG_IFUP, + "rate shaping and fairness are disabled\n"); +} + +static inline void bnx2x_link_sync_notify(struct bnx2x *bp) +{ + int func; + int vn; + + /* Set the attention towards other drivers on the same port */ + for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) { + if (vn == BP_VN(bp)) + continue; + + func = func_by_vn(bp, vn); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_0 + + (LINK_SYNC_ATTENTION_BIT_FUNC_0 + func)*4, 1); + } +} + +/* This function is called upon link interrupt */ +static void bnx2x_link_attn(struct bnx2x *bp) +{ + /* Make sure that we are synced with the current statistics */ + bnx2x_stats_handle(bp, STATS_EVENT_STOP); + + bnx2x_link_update(&bp->link_params, &bp->link_vars); + + if (bp->link_vars.link_up) { + + /* dropless flow control */ + if (!CHIP_IS_E1(bp) && bp->dropless_fc) { + int port = BP_PORT(bp); + u32 pause_enabled = 0; + + if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX) + pause_enabled = 1; + + REG_WR(bp, BAR_USTRORM_INTMEM + + USTORM_ETH_PAUSE_ENABLED_OFFSET(port), + pause_enabled); + } + + if (bp->link_vars.mac_type != MAC_TYPE_EMAC) { + struct host_port_stats *pstats; + + pstats = bnx2x_sp(bp, port_stats); + /* reset old mac stats */ + memset(&(pstats->mac_stx[0]), 0, + sizeof(struct mac_stx)); + } + if (bp->state == BNX2X_STATE_OPEN) + bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP); + } + + if (bp->link_vars.link_up && bp->link_vars.line_speed) { + int cmng_fns = bnx2x_get_cmng_fns_mode(bp); + + if (cmng_fns != CMNG_FNS_NONE) { + bnx2x_cmng_fns_init(bp, false, cmng_fns); + storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp)); + } else + /* rate shaping and fairness are disabled */ + DP(NETIF_MSG_IFUP, + "single function mode without fairness\n"); + } + + __bnx2x_link_report(bp); + + if (IS_MF(bp)) + bnx2x_link_sync_notify(bp); +} + +void bnx2x__link_status_update(struct bnx2x *bp) +{ + if (bp->state != BNX2X_STATE_OPEN) + return; + + bnx2x_link_status_update(&bp->link_params, &bp->link_vars); + + if (bp->link_vars.link_up) + bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP); + else + bnx2x_stats_handle(bp, STATS_EVENT_STOP); + + /* indicate link status */ + bnx2x_link_report(bp); +} + +static void bnx2x_pmf_update(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + u32 val; + + bp->port.pmf = 1; + DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf); + + /* + * We need the mb() to ensure the ordering between the writing to + * bp->port.pmf here and reading it from the bnx2x_periodic_task(). + */ + smp_mb(); + + /* queue a periodic task */ + queue_delayed_work(bnx2x_wq, &bp->period_task, 0); + + bnx2x_dcbx_pmf_update(bp); + + /* enable nig attention */ + val = (0xff0f | (1 << (BP_VN(bp) + 4))); + if (bp->common.int_block == INT_BLOCK_HC) { + REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val); + REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val); + } else if (!CHIP_IS_E1x(bp)) { + REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, val); + REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, val); + } + + bnx2x_stats_handle(bp, STATS_EVENT_PMF); +} + +/* end of Link */ + +/* slow path */ + +/* + * General service functions + */ + +/* send the MCP a request, block until there is a reply */ +u32 bnx2x_fw_command(struct bnx2x *bp, u32 command, u32 param) +{ + int mb_idx = BP_FW_MB_IDX(bp); + u32 seq; + u32 rc = 0; + u32 cnt = 1; + u8 delay = CHIP_REV_IS_SLOW(bp) ? 100 : 10; + + mutex_lock(&bp->fw_mb_mutex); + seq = ++bp->fw_seq; + SHMEM_WR(bp, func_mb[mb_idx].drv_mb_param, param); + SHMEM_WR(bp, func_mb[mb_idx].drv_mb_header, (command | seq)); + + DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB param 0x%08x\n", + (command | seq), param); + + do { + /* let the FW do it's magic ... */ + msleep(delay); + + rc = SHMEM_RD(bp, func_mb[mb_idx].fw_mb_header); + + /* Give the FW up to 5 second (500*10ms) */ + } while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 500)); + + DP(BNX2X_MSG_MCP, "[after %d ms] read (%x) seq is (%x) from FW MB\n", + cnt*delay, rc, seq); + + /* is this a reply to our command? */ + if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK)) + rc &= FW_MSG_CODE_MASK; + else { + /* FW BUG! */ + BNX2X_ERR("FW failed to respond!\n"); + bnx2x_fw_dump(bp); + rc = 0; + } + mutex_unlock(&bp->fw_mb_mutex); + + return rc; +} + +static u8 stat_counter_valid(struct bnx2x *bp, struct bnx2x_fastpath *fp) +{ +#ifdef BCM_CNIC + /* Statistics are not supported for CNIC Clients at the moment */ + if (IS_FCOE_FP(fp)) + return false; +#endif + return true; +} + +void bnx2x_func_init(struct bnx2x *bp, struct bnx2x_func_init_params *p) +{ + if (CHIP_IS_E1x(bp)) { + struct tstorm_eth_function_common_config tcfg = {0}; + + storm_memset_func_cfg(bp, &tcfg, p->func_id); + } + + /* Enable the function in the FW */ + storm_memset_vf_to_pf(bp, p->func_id, p->pf_id); + storm_memset_func_en(bp, p->func_id, 1); + + /* spq */ + if (p->func_flgs & FUNC_FLG_SPQ) { + storm_memset_spq_addr(bp, p->spq_map, p->func_id); + REG_WR(bp, XSEM_REG_FAST_MEMORY + + XSTORM_SPQ_PROD_OFFSET(p->func_id), p->spq_prod); + } +} + +/** + * bnx2x_get_tx_only_flags - Return common flags + * + * @bp device handle + * @fp queue handle + * @zero_stats TRUE if statistics zeroing is needed + * + * Return the flags that are common for the Tx-only and not normal connections. + */ +static inline unsigned long bnx2x_get_common_flags(struct bnx2x *bp, + struct bnx2x_fastpath *fp, + bool zero_stats) +{ + unsigned long flags = 0; + + /* PF driver will always initialize the Queue to an ACTIVE state */ + __set_bit(BNX2X_Q_FLG_ACTIVE, &flags); + + /* tx only connections collect statistics (on the same index as the + * parent connection). The statistics are zeroed when the parent + * connection is initialized. + */ + if (stat_counter_valid(bp, fp)) { + __set_bit(BNX2X_Q_FLG_STATS, &flags); + if (zero_stats) + __set_bit(BNX2X_Q_FLG_ZERO_STATS, &flags); + } + + return flags; +} + +static inline unsigned long bnx2x_get_q_flags(struct bnx2x *bp, + struct bnx2x_fastpath *fp, + bool leading) +{ + unsigned long flags = 0; + + /* calculate other queue flags */ + if (IS_MF_SD(bp)) + __set_bit(BNX2X_Q_FLG_OV, &flags); + + if (IS_FCOE_FP(fp)) + __set_bit(BNX2X_Q_FLG_FCOE, &flags); + + if (!fp->disable_tpa) { + __set_bit(BNX2X_Q_FLG_TPA, &flags); + __set_bit(BNX2X_Q_FLG_TPA_IPV6, &flags); + } + + if (leading) { + __set_bit(BNX2X_Q_FLG_LEADING_RSS, &flags); + __set_bit(BNX2X_Q_FLG_MCAST, &flags); + } + + /* Always set HW VLAN stripping */ + __set_bit(BNX2X_Q_FLG_VLAN, &flags); + + + return flags | bnx2x_get_common_flags(bp, fp, true); +} + +static void bnx2x_pf_q_prep_general(struct bnx2x *bp, + struct bnx2x_fastpath *fp, struct bnx2x_general_setup_params *gen_init, + u8 cos) +{ + gen_init->stat_id = bnx2x_stats_id(fp); + gen_init->spcl_id = fp->cl_id; + + /* Always use mini-jumbo MTU for FCoE L2 ring */ + if (IS_FCOE_FP(fp)) + gen_init->mtu = BNX2X_FCOE_MINI_JUMBO_MTU; + else + gen_init->mtu = bp->dev->mtu; + + gen_init->cos = cos; +} + +static void bnx2x_pf_rx_q_prep(struct bnx2x *bp, + struct bnx2x_fastpath *fp, struct rxq_pause_params *pause, + struct bnx2x_rxq_setup_params *rxq_init) +{ + u8 max_sge = 0; + u16 sge_sz = 0; + u16 tpa_agg_size = 0; + + if (!fp->disable_tpa) { + pause->sge_th_lo = SGE_TH_LO(bp); + pause->sge_th_hi = SGE_TH_HI(bp); + + /* validate SGE ring has enough to cross high threshold */ + WARN_ON(bp->dropless_fc && + pause->sge_th_hi + FW_PREFETCH_CNT > + MAX_RX_SGE_CNT * NUM_RX_SGE_PAGES); + + tpa_agg_size = min_t(u32, + (min_t(u32, 8, MAX_SKB_FRAGS) * + SGE_PAGE_SIZE * PAGES_PER_SGE), 0xffff); + max_sge = SGE_PAGE_ALIGN(bp->dev->mtu) >> + SGE_PAGE_SHIFT; + max_sge = ((max_sge + PAGES_PER_SGE - 1) & + (~(PAGES_PER_SGE-1))) >> PAGES_PER_SGE_SHIFT; + sge_sz = (u16)min_t(u32, SGE_PAGE_SIZE * PAGES_PER_SGE, + 0xffff); + } + + /* pause - not for e1 */ + if (!CHIP_IS_E1(bp)) { + pause->bd_th_lo = BD_TH_LO(bp); + pause->bd_th_hi = BD_TH_HI(bp); + + pause->rcq_th_lo = RCQ_TH_LO(bp); + pause->rcq_th_hi = RCQ_TH_HI(bp); + /* + * validate that rings have enough entries to cross + * high thresholds + */ + WARN_ON(bp->dropless_fc && + pause->bd_th_hi + FW_PREFETCH_CNT > + bp->rx_ring_size); + WARN_ON(bp->dropless_fc && + pause->rcq_th_hi + FW_PREFETCH_CNT > + NUM_RCQ_RINGS * MAX_RCQ_DESC_CNT); + + pause->pri_map = 1; + } + + /* rxq setup */ + rxq_init->dscr_map = fp->rx_desc_mapping; + rxq_init->sge_map = fp->rx_sge_mapping; + rxq_init->rcq_map = fp->rx_comp_mapping; + rxq_init->rcq_np_map = fp->rx_comp_mapping + BCM_PAGE_SIZE; + + /* This should be a maximum number of data bytes that may be + * placed on the BD (not including paddings). + */ + rxq_init->buf_sz = fp->rx_buf_size - BNX2X_FW_RX_ALIGN - + IP_HEADER_ALIGNMENT_PADDING; + + rxq_init->cl_qzone_id = fp->cl_qzone_id; + rxq_init->tpa_agg_sz = tpa_agg_size; + rxq_init->sge_buf_sz = sge_sz; + rxq_init->max_sges_pkt = max_sge; + rxq_init->rss_engine_id = BP_FUNC(bp); + + /* Maximum number or simultaneous TPA aggregation for this Queue. + * + * For PF Clients it should be the maximum avaliable number. + * VF driver(s) may want to define it to a smaller value. + */ + rxq_init->max_tpa_queues = MAX_AGG_QS(bp); + + rxq_init->cache_line_log = BNX2X_RX_ALIGN_SHIFT; + rxq_init->fw_sb_id = fp->fw_sb_id; + + if (IS_FCOE_FP(fp)) + rxq_init->sb_cq_index = HC_SP_INDEX_ETH_FCOE_RX_CQ_CONS; + else + rxq_init->sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS; +} + +static void bnx2x_pf_tx_q_prep(struct bnx2x *bp, + struct bnx2x_fastpath *fp, struct bnx2x_txq_setup_params *txq_init, + u8 cos) +{ + txq_init->dscr_map = fp->txdata[cos].tx_desc_mapping; + txq_init->sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS + cos; + txq_init->traffic_type = LLFC_TRAFFIC_TYPE_NW; + txq_init->fw_sb_id = fp->fw_sb_id; + + /* + * set the tss leading client id for TX classfication == + * leading RSS client id + */ + txq_init->tss_leading_cl_id = bnx2x_fp(bp, 0, cl_id); + + if (IS_FCOE_FP(fp)) { + txq_init->sb_cq_index = HC_SP_INDEX_ETH_FCOE_TX_CQ_CONS; + txq_init->traffic_type = LLFC_TRAFFIC_TYPE_FCOE; + } +} + +static void bnx2x_pf_init(struct bnx2x *bp) +{ + struct bnx2x_func_init_params func_init = {0}; + struct event_ring_data eq_data = { {0} }; + u16 flags; + + if (!CHIP_IS_E1x(bp)) { + /* reset IGU PF statistics: MSIX + ATTN */ + /* PF */ + REG_WR(bp, IGU_REG_STATISTIC_NUM_MESSAGE_SENT + + BNX2X_IGU_STAS_MSG_VF_CNT*4 + + (CHIP_MODE_IS_4_PORT(bp) ? + BP_FUNC(bp) : BP_VN(bp))*4, 0); + /* ATTN */ + REG_WR(bp, IGU_REG_STATISTIC_NUM_MESSAGE_SENT + + BNX2X_IGU_STAS_MSG_VF_CNT*4 + + BNX2X_IGU_STAS_MSG_PF_CNT*4 + + (CHIP_MODE_IS_4_PORT(bp) ? + BP_FUNC(bp) : BP_VN(bp))*4, 0); + } + + /* function setup flags */ + flags = (FUNC_FLG_STATS | FUNC_FLG_LEADING | FUNC_FLG_SPQ); + + /* This flag is relevant for E1x only. + * E2 doesn't have a TPA configuration in a function level. + */ + flags |= (bp->flags & TPA_ENABLE_FLAG) ? FUNC_FLG_TPA : 0; + + func_init.func_flgs = flags; + func_init.pf_id = BP_FUNC(bp); + func_init.func_id = BP_FUNC(bp); + func_init.spq_map = bp->spq_mapping; + func_init.spq_prod = bp->spq_prod_idx; + + bnx2x_func_init(bp, &func_init); + + memset(&(bp->cmng), 0, sizeof(struct cmng_struct_per_port)); + + /* + * Congestion management values depend on the link rate + * There is no active link so initial link rate is set to 10 Gbps. + * When the link comes up The congestion management values are + * re-calculated according to the actual link rate. + */ + bp->link_vars.line_speed = SPEED_10000; + bnx2x_cmng_fns_init(bp, true, bnx2x_get_cmng_fns_mode(bp)); + + /* Only the PMF sets the HW */ + if (bp->port.pmf) + storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp)); + + /* init Event Queue */ + eq_data.base_addr.hi = U64_HI(bp->eq_mapping); + eq_data.base_addr.lo = U64_LO(bp->eq_mapping); + eq_data.producer = bp->eq_prod; + eq_data.index_id = HC_SP_INDEX_EQ_CONS; + eq_data.sb_id = DEF_SB_ID; + storm_memset_eq_data(bp, &eq_data, BP_FUNC(bp)); +} + + +static void bnx2x_e1h_disable(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + + bnx2x_tx_disable(bp); + + REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0); +} + +static void bnx2x_e1h_enable(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + + REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 1); + + /* Tx queue should be only reenabled */ + netif_tx_wake_all_queues(bp->dev); + + /* + * Should not call netif_carrier_on since it will be called if the link + * is up when checking for link state + */ +} + +/* called due to MCP event (on pmf): + * reread new bandwidth configuration + * configure FW + * notify others function about the change + */ +static inline void bnx2x_config_mf_bw(struct bnx2x *bp) +{ + if (bp->link_vars.link_up) { + bnx2x_cmng_fns_init(bp, true, CMNG_FNS_MINMAX); + bnx2x_link_sync_notify(bp); + } + storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp)); +} + +static inline void bnx2x_set_mf_bw(struct bnx2x *bp) +{ + bnx2x_config_mf_bw(bp); + bnx2x_fw_command(bp, DRV_MSG_CODE_SET_MF_BW_ACK, 0); +} + +static void bnx2x_dcc_event(struct bnx2x *bp, u32 dcc_event) +{ + DP(BNX2X_MSG_MCP, "dcc_event 0x%x\n", dcc_event); + + if (dcc_event & DRV_STATUS_DCC_DISABLE_ENABLE_PF) { + + /* + * This is the only place besides the function initialization + * where the bp->flags can change so it is done without any + * locks + */ + if (bp->mf_config[BP_VN(bp)] & FUNC_MF_CFG_FUNC_DISABLED) { + DP(NETIF_MSG_IFDOWN, "mf_cfg function disabled\n"); + bp->flags |= MF_FUNC_DIS; + + bnx2x_e1h_disable(bp); + } else { + DP(NETIF_MSG_IFUP, "mf_cfg function enabled\n"); + bp->flags &= ~MF_FUNC_DIS; + + bnx2x_e1h_enable(bp); + } + dcc_event &= ~DRV_STATUS_DCC_DISABLE_ENABLE_PF; + } + if (dcc_event & DRV_STATUS_DCC_BANDWIDTH_ALLOCATION) { + bnx2x_config_mf_bw(bp); + dcc_event &= ~DRV_STATUS_DCC_BANDWIDTH_ALLOCATION; + } + + /* Report results to MCP */ + if (dcc_event) + bnx2x_fw_command(bp, DRV_MSG_CODE_DCC_FAILURE, 0); + else + bnx2x_fw_command(bp, DRV_MSG_CODE_DCC_OK, 0); +} + +/* must be called under the spq lock */ +static inline struct eth_spe *bnx2x_sp_get_next(struct bnx2x *bp) +{ + struct eth_spe *next_spe = bp->spq_prod_bd; + + if (bp->spq_prod_bd == bp->spq_last_bd) { + bp->spq_prod_bd = bp->spq; + bp->spq_prod_idx = 0; + DP(NETIF_MSG_TIMER, "end of spq\n"); + } else { + bp->spq_prod_bd++; + bp->spq_prod_idx++; + } + return next_spe; +} + +/* must be called under the spq lock */ +static inline void bnx2x_sp_prod_update(struct bnx2x *bp) +{ + int func = BP_FUNC(bp); + + /* + * Make sure that BD data is updated before writing the producer: + * BD data is written to the memory, the producer is read from the + * memory, thus we need a full memory barrier to ensure the ordering. + */ + mb(); + + REG_WR16(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func), + bp->spq_prod_idx); + mmiowb(); +} + +/** + * bnx2x_is_contextless_ramrod - check if the current command ends on EQ + * + * @cmd: command to check + * @cmd_type: command type + */ +static inline bool bnx2x_is_contextless_ramrod(int cmd, int cmd_type) +{ + if ((cmd_type == NONE_CONNECTION_TYPE) || + (cmd == RAMROD_CMD_ID_ETH_FORWARD_SETUP) || + (cmd == RAMROD_CMD_ID_ETH_CLASSIFICATION_RULES) || + (cmd == RAMROD_CMD_ID_ETH_FILTER_RULES) || + (cmd == RAMROD_CMD_ID_ETH_MULTICAST_RULES) || + (cmd == RAMROD_CMD_ID_ETH_SET_MAC) || + (cmd == RAMROD_CMD_ID_ETH_RSS_UPDATE)) + return true; + else + return false; + +} + + +/** + * bnx2x_sp_post - place a single command on an SP ring + * + * @bp: driver handle + * @command: command to place (e.g. SETUP, FILTER_RULES, etc.) + * @cid: SW CID the command is related to + * @data_hi: command private data address (high 32 bits) + * @data_lo: command private data address (low 32 bits) + * @cmd_type: command type (e.g. NONE, ETH) + * + * SP data is handled as if it's always an address pair, thus data fields are + * not swapped to little endian in upper functions. Instead this function swaps + * data as if it's two u32 fields. + */ +int bnx2x_sp_post(struct bnx2x *bp, int command, int cid, + u32 data_hi, u32 data_lo, int cmd_type) +{ + struct eth_spe *spe; + u16 type; + bool common = bnx2x_is_contextless_ramrod(command, cmd_type); + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) + return -EIO; +#endif + + spin_lock_bh(&bp->spq_lock); + + if (common) { + if (!atomic_read(&bp->eq_spq_left)) { + BNX2X_ERR("BUG! EQ ring full!\n"); + spin_unlock_bh(&bp->spq_lock); + bnx2x_panic(); + return -EBUSY; + } + } else if (!atomic_read(&bp->cq_spq_left)) { + BNX2X_ERR("BUG! SPQ ring full!\n"); + spin_unlock_bh(&bp->spq_lock); + bnx2x_panic(); + return -EBUSY; + } + + spe = bnx2x_sp_get_next(bp); + + /* CID needs port number to be encoded int it */ + spe->hdr.conn_and_cmd_data = + cpu_to_le32((command << SPE_HDR_CMD_ID_SHIFT) | + HW_CID(bp, cid)); + + type = (cmd_type << SPE_HDR_CONN_TYPE_SHIFT) & SPE_HDR_CONN_TYPE; + + type |= ((BP_FUNC(bp) << SPE_HDR_FUNCTION_ID_SHIFT) & + SPE_HDR_FUNCTION_ID); + + spe->hdr.type = cpu_to_le16(type); + + spe->data.update_data_addr.hi = cpu_to_le32(data_hi); + spe->data.update_data_addr.lo = cpu_to_le32(data_lo); + + /* + * It's ok if the actual decrement is issued towards the memory + * somewhere between the spin_lock and spin_unlock. Thus no + * more explict memory barrier is needed. + */ + if (common) + atomic_dec(&bp->eq_spq_left); + else + atomic_dec(&bp->cq_spq_left); + + + DP(BNX2X_MSG_SP/*NETIF_MSG_TIMER*/, + "SPQE[%x] (%x:%x) (cmd, common?) (%d,%d) hw_cid %x data (%x:%x) " + "type(0x%x) left (CQ, EQ) (%x,%x)\n", + bp->spq_prod_idx, (u32)U64_HI(bp->spq_mapping), + (u32)(U64_LO(bp->spq_mapping) + + (void *)bp->spq_prod_bd - (void *)bp->spq), command, common, + HW_CID(bp, cid), data_hi, data_lo, type, + atomic_read(&bp->cq_spq_left), atomic_read(&bp->eq_spq_left)); + + bnx2x_sp_prod_update(bp); + spin_unlock_bh(&bp->spq_lock); + return 0; +} + +/* acquire split MCP access lock register */ +static int bnx2x_acquire_alr(struct bnx2x *bp) +{ + u32 j, val; + int rc = 0; + + might_sleep(); + for (j = 0; j < 1000; j++) { + val = (1UL << 31); + REG_WR(bp, GRCBASE_MCP + 0x9c, val); + val = REG_RD(bp, GRCBASE_MCP + 0x9c); + if (val & (1L << 31)) + break; + + msleep(5); + } + if (!(val & (1L << 31))) { + BNX2X_ERR("Cannot acquire MCP access lock register\n"); + rc = -EBUSY; + } + + return rc; +} + +/* release split MCP access lock register */ +static void bnx2x_release_alr(struct bnx2x *bp) +{ + REG_WR(bp, GRCBASE_MCP + 0x9c, 0); +} + +#define BNX2X_DEF_SB_ATT_IDX 0x0001 +#define BNX2X_DEF_SB_IDX 0x0002 + +static inline u16 bnx2x_update_dsb_idx(struct bnx2x *bp) +{ + struct host_sp_status_block *def_sb = bp->def_status_blk; + u16 rc = 0; + + barrier(); /* status block is written to by the chip */ + if (bp->def_att_idx != def_sb->atten_status_block.attn_bits_index) { + bp->def_att_idx = def_sb->atten_status_block.attn_bits_index; + rc |= BNX2X_DEF_SB_ATT_IDX; + } + + if (bp->def_idx != def_sb->sp_sb.running_index) { + bp->def_idx = def_sb->sp_sb.running_index; + rc |= BNX2X_DEF_SB_IDX; + } + + /* Do not reorder: indecies reading should complete before handling */ + barrier(); + return rc; +} + +/* + * slow path service functions + */ + +static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted) +{ + int port = BP_PORT(bp); + u32 aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 : + MISC_REG_AEU_MASK_ATTN_FUNC_0; + u32 nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 : + NIG_REG_MASK_INTERRUPT_PORT0; + u32 aeu_mask; + u32 nig_mask = 0; + u32 reg_addr; + + if (bp->attn_state & asserted) + BNX2X_ERR("IGU ERROR\n"); + + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port); + aeu_mask = REG_RD(bp, aeu_addr); + + DP(NETIF_MSG_HW, "aeu_mask %x newly asserted %x\n", + aeu_mask, asserted); + aeu_mask &= ~(asserted & 0x3ff); + DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask); + + REG_WR(bp, aeu_addr, aeu_mask); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port); + + DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state); + bp->attn_state |= asserted; + DP(NETIF_MSG_HW, "new state %x\n", bp->attn_state); + + if (asserted & ATTN_HARD_WIRED_MASK) { + if (asserted & ATTN_NIG_FOR_FUNC) { + + bnx2x_acquire_phy_lock(bp); + + /* save nig interrupt mask */ + nig_mask = REG_RD(bp, nig_int_mask_addr); + + /* If nig_mask is not set, no need to call the update + * function. + */ + if (nig_mask) { + REG_WR(bp, nig_int_mask_addr, 0); + + bnx2x_link_attn(bp); + } + + /* handle unicore attn? */ + } + if (asserted & ATTN_SW_TIMER_4_FUNC) + DP(NETIF_MSG_HW, "ATTN_SW_TIMER_4_FUNC!\n"); + + if (asserted & GPIO_2_FUNC) + DP(NETIF_MSG_HW, "GPIO_2_FUNC!\n"); + + if (asserted & GPIO_3_FUNC) + DP(NETIF_MSG_HW, "GPIO_3_FUNC!\n"); + + if (asserted & GPIO_4_FUNC) + DP(NETIF_MSG_HW, "GPIO_4_FUNC!\n"); + + if (port == 0) { + if (asserted & ATTN_GENERAL_ATTN_1) { + DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_1!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_1, 0x0); + } + if (asserted & ATTN_GENERAL_ATTN_2) { + DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_2!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_2, 0x0); + } + if (asserted & ATTN_GENERAL_ATTN_3) { + DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_3!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_3, 0x0); + } + } else { + if (asserted & ATTN_GENERAL_ATTN_4) { + DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_4!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_4, 0x0); + } + if (asserted & ATTN_GENERAL_ATTN_5) { + DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_5!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_5, 0x0); + } + if (asserted & ATTN_GENERAL_ATTN_6) { + DP(NETIF_MSG_HW, "ATTN_GENERAL_ATTN_6!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_6, 0x0); + } + } + + } /* if hardwired */ + + if (bp->common.int_block == INT_BLOCK_HC) + reg_addr = (HC_REG_COMMAND_REG + port*32 + + COMMAND_REG_ATTN_BITS_SET); + else + reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_SET_UPPER*8); + + DP(NETIF_MSG_HW, "about to mask 0x%08x at %s addr 0x%x\n", asserted, + (bp->common.int_block == INT_BLOCK_HC) ? "HC" : "IGU", reg_addr); + REG_WR(bp, reg_addr, asserted); + + /* now set back the mask */ + if (asserted & ATTN_NIG_FOR_FUNC) { + REG_WR(bp, nig_int_mask_addr, nig_mask); + bnx2x_release_phy_lock(bp); + } +} + +static inline void bnx2x_fan_failure(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + u32 ext_phy_config; + /* mark the failure */ + ext_phy_config = + SHMEM_RD(bp, + dev_info.port_hw_config[port].external_phy_config); + + ext_phy_config &= ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK; + ext_phy_config |= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE; + SHMEM_WR(bp, dev_info.port_hw_config[port].external_phy_config, + ext_phy_config); + + /* log the failure */ + netdev_err(bp->dev, "Fan Failure on Network Controller has caused" + " the driver to shutdown the card to prevent permanent" + " damage. Please contact OEM Support for assistance\n"); +} + +static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn) +{ + int port = BP_PORT(bp); + int reg_offset; + u32 val; + + reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 : + MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); + + if (attn & AEU_INPUTS_ATTN_BITS_SPIO5) { + + val = REG_RD(bp, reg_offset); + val &= ~AEU_INPUTS_ATTN_BITS_SPIO5; + REG_WR(bp, reg_offset, val); + + BNX2X_ERR("SPIO5 hw attention\n"); + + /* Fan failure attention */ + bnx2x_hw_reset_phy(&bp->link_params); + bnx2x_fan_failure(bp); + } + + if ((attn & bp->link_vars.aeu_int_mask) && bp->port.pmf) { + bnx2x_acquire_phy_lock(bp); + bnx2x_handle_module_detect_int(&bp->link_params); + bnx2x_release_phy_lock(bp); + } + + if (attn & HW_INTERRUT_ASSERT_SET_0) { + + val = REG_RD(bp, reg_offset); + val &= ~(attn & HW_INTERRUT_ASSERT_SET_0); + REG_WR(bp, reg_offset, val); + + BNX2X_ERR("FATAL HW block attention set0 0x%x\n", + (u32)(attn & HW_INTERRUT_ASSERT_SET_0)); + bnx2x_panic(); + } +} + +static inline void bnx2x_attn_int_deasserted1(struct bnx2x *bp, u32 attn) +{ + u32 val; + + if (attn & AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT) { + + val = REG_RD(bp, DORQ_REG_DORQ_INT_STS_CLR); + BNX2X_ERR("DB hw attention 0x%x\n", val); + /* DORQ discard attention */ + if (val & 0x2) + BNX2X_ERR("FATAL error from DORQ\n"); + } + + if (attn & HW_INTERRUT_ASSERT_SET_1) { + + int port = BP_PORT(bp); + int reg_offset; + + reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 : + MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1); + + val = REG_RD(bp, reg_offset); + val &= ~(attn & HW_INTERRUT_ASSERT_SET_1); + REG_WR(bp, reg_offset, val); + + BNX2X_ERR("FATAL HW block attention set1 0x%x\n", + (u32)(attn & HW_INTERRUT_ASSERT_SET_1)); + bnx2x_panic(); + } +} + +static inline void bnx2x_attn_int_deasserted2(struct bnx2x *bp, u32 attn) +{ + u32 val; + + if (attn & AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) { + + val = REG_RD(bp, CFC_REG_CFC_INT_STS_CLR); + BNX2X_ERR("CFC hw attention 0x%x\n", val); + /* CFC error attention */ + if (val & 0x2) + BNX2X_ERR("FATAL error from CFC\n"); + } + + if (attn & AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) { + val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_0); + BNX2X_ERR("PXP hw attention-0 0x%x\n", val); + /* RQ_USDMDP_FIFO_OVERFLOW */ + if (val & 0x18000) + BNX2X_ERR("FATAL error from PXP\n"); + + if (!CHIP_IS_E1x(bp)) { + val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_1); + BNX2X_ERR("PXP hw attention-1 0x%x\n", val); + } + } + + if (attn & HW_INTERRUT_ASSERT_SET_2) { + + int port = BP_PORT(bp); + int reg_offset; + + reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 : + MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2); + + val = REG_RD(bp, reg_offset); + val &= ~(attn & HW_INTERRUT_ASSERT_SET_2); + REG_WR(bp, reg_offset, val); + + BNX2X_ERR("FATAL HW block attention set2 0x%x\n", + (u32)(attn & HW_INTERRUT_ASSERT_SET_2)); + bnx2x_panic(); + } +} + +static inline void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn) +{ + u32 val; + + if (attn & EVEREST_GEN_ATTN_IN_USE_MASK) { + + if (attn & BNX2X_PMF_LINK_ASSERT) { + int func = BP_FUNC(bp); + + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0); + bp->mf_config[BP_VN(bp)] = MF_CFG_RD(bp, + func_mf_config[BP_ABS_FUNC(bp)].config); + val = SHMEM_RD(bp, + func_mb[BP_FW_MB_IDX(bp)].drv_status); + if (val & DRV_STATUS_DCC_EVENT_MASK) + bnx2x_dcc_event(bp, + (val & DRV_STATUS_DCC_EVENT_MASK)); + + if (val & DRV_STATUS_SET_MF_BW) + bnx2x_set_mf_bw(bp); + + if ((bp->port.pmf == 0) && (val & DRV_STATUS_PMF)) + bnx2x_pmf_update(bp); + + if (bp->port.pmf && + (val & DRV_STATUS_DCBX_NEGOTIATION_RESULTS) && + bp->dcbx_enabled > 0) + /* start dcbx state machine */ + bnx2x_dcbx_set_params(bp, + BNX2X_DCBX_STATE_NEG_RECEIVED); + if (bp->link_vars.periodic_flags & + PERIODIC_FLAGS_LINK_EVENT) { + /* sync with link */ + bnx2x_acquire_phy_lock(bp); + bp->link_vars.periodic_flags &= + ~PERIODIC_FLAGS_LINK_EVENT; + bnx2x_release_phy_lock(bp); + if (IS_MF(bp)) + bnx2x_link_sync_notify(bp); + bnx2x_link_report(bp); + } + /* Always call it here: bnx2x_link_report() will + * prevent the link indication duplication. + */ + bnx2x__link_status_update(bp); + } else if (attn & BNX2X_MC_ASSERT_BITS) { + + BNX2X_ERR("MC assert!\n"); + bnx2x_mc_assert(bp); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_10, 0); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_9, 0); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_8, 0); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_7, 0); + bnx2x_panic(); + + } else if (attn & BNX2X_MCP_ASSERT) { + + BNX2X_ERR("MCP assert!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_11, 0); + bnx2x_fw_dump(bp); + + } else + BNX2X_ERR("Unknown HW assert! (attn 0x%x)\n", attn); + } + + if (attn & EVEREST_LATCHED_ATTN_IN_USE_MASK) { + BNX2X_ERR("LATCHED attention 0x%08x (masked)\n", attn); + if (attn & BNX2X_GRC_TIMEOUT) { + val = CHIP_IS_E1(bp) ? 0 : + REG_RD(bp, MISC_REG_GRC_TIMEOUT_ATTN); + BNX2X_ERR("GRC time-out 0x%08x\n", val); + } + if (attn & BNX2X_GRC_RSV) { + val = CHIP_IS_E1(bp) ? 0 : + REG_RD(bp, MISC_REG_GRC_RSV_ATTN); + BNX2X_ERR("GRC reserved 0x%08x\n", val); + } + REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x7ff); + } +} + +/* + * Bits map: + * 0-7 - Engine0 load counter. + * 8-15 - Engine1 load counter. + * 16 - Engine0 RESET_IN_PROGRESS bit. + * 17 - Engine1 RESET_IN_PROGRESS bit. + * 18 - Engine0 ONE_IS_LOADED. Set when there is at least one active function + * on the engine + * 19 - Engine1 ONE_IS_LOADED. + * 20 - Chip reset flow bit. When set none-leader must wait for both engines + * leader to complete (check for both RESET_IN_PROGRESS bits and not for + * just the one belonging to its engine). + * + */ +#define BNX2X_RECOVERY_GLOB_REG MISC_REG_GENERIC_POR_1 + +#define BNX2X_PATH0_LOAD_CNT_MASK 0x000000ff +#define BNX2X_PATH0_LOAD_CNT_SHIFT 0 +#define BNX2X_PATH1_LOAD_CNT_MASK 0x0000ff00 +#define BNX2X_PATH1_LOAD_CNT_SHIFT 8 +#define BNX2X_PATH0_RST_IN_PROG_BIT 0x00010000 +#define BNX2X_PATH1_RST_IN_PROG_BIT 0x00020000 +#define BNX2X_GLOBAL_RESET_BIT 0x00040000 + +/* + * Set the GLOBAL_RESET bit. + * + * Should be run under rtnl lock + */ +void bnx2x_set_reset_global(struct bnx2x *bp) +{ + u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + + REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val | BNX2X_GLOBAL_RESET_BIT); + barrier(); + mmiowb(); +} + +/* + * Clear the GLOBAL_RESET bit. + * + * Should be run under rtnl lock + */ +static inline void bnx2x_clear_reset_global(struct bnx2x *bp) +{ + u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + + REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val & (~BNX2X_GLOBAL_RESET_BIT)); + barrier(); + mmiowb(); +} + +/* + * Checks the GLOBAL_RESET bit. + * + * should be run under rtnl lock + */ +static inline bool bnx2x_reset_is_global(struct bnx2x *bp) +{ + u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + + DP(NETIF_MSG_HW, "GEN_REG_VAL=0x%08x\n", val); + return (val & BNX2X_GLOBAL_RESET_BIT) ? true : false; +} + +/* + * Clear RESET_IN_PROGRESS bit for the current engine. + * + * Should be run under rtnl lock + */ +static inline void bnx2x_set_reset_done(struct bnx2x *bp) +{ + u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + u32 bit = BP_PATH(bp) ? + BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT; + + /* Clear the bit */ + val &= ~bit; + REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val); + barrier(); + mmiowb(); +} + +/* + * Set RESET_IN_PROGRESS for the current engine. + * + * should be run under rtnl lock + */ +void bnx2x_set_reset_in_progress(struct bnx2x *bp) +{ + u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + u32 bit = BP_PATH(bp) ? + BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT; + + /* Set the bit */ + val |= bit; + REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val); + barrier(); + mmiowb(); +} + +/* + * Checks the RESET_IN_PROGRESS bit for the given engine. + * should be run under rtnl lock + */ +bool bnx2x_reset_is_done(struct bnx2x *bp, int engine) +{ + u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + u32 bit = engine ? + BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT; + + /* return false if bit is set */ + return (val & bit) ? false : true; +} + +/* + * Increment the load counter for the current engine. + * + * should be run under rtnl lock + */ +void bnx2x_inc_load_cnt(struct bnx2x *bp) +{ + u32 val1, val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + u32 mask = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK : + BNX2X_PATH0_LOAD_CNT_MASK; + u32 shift = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_SHIFT : + BNX2X_PATH0_LOAD_CNT_SHIFT; + + DP(NETIF_MSG_HW, "Old GEN_REG_VAL=0x%08x\n", val); + + /* get the current counter value */ + val1 = (val & mask) >> shift; + + /* increment... */ + val1++; + + /* clear the old value */ + val &= ~mask; + + /* set the new one */ + val |= ((val1 << shift) & mask); + + REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val); + barrier(); + mmiowb(); +} + +/** + * bnx2x_dec_load_cnt - decrement the load counter + * + * @bp: driver handle + * + * Should be run under rtnl lock. + * Decrements the load counter for the current engine. Returns + * the new counter value. + */ +u32 bnx2x_dec_load_cnt(struct bnx2x *bp) +{ + u32 val1, val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + u32 mask = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK : + BNX2X_PATH0_LOAD_CNT_MASK; + u32 shift = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_SHIFT : + BNX2X_PATH0_LOAD_CNT_SHIFT; + + DP(NETIF_MSG_HW, "Old GEN_REG_VAL=0x%08x\n", val); + + /* get the current counter value */ + val1 = (val & mask) >> shift; + + /* decrement... */ + val1--; + + /* clear the old value */ + val &= ~mask; + + /* set the new one */ + val |= ((val1 << shift) & mask); + + REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val); + barrier(); + mmiowb(); + + return val1; +} + +/* + * Read the load counter for the current engine. + * + * should be run under rtnl lock + */ +static inline u32 bnx2x_get_load_cnt(struct bnx2x *bp, int engine) +{ + u32 mask = (engine ? BNX2X_PATH1_LOAD_CNT_MASK : + BNX2X_PATH0_LOAD_CNT_MASK); + u32 shift = (engine ? BNX2X_PATH1_LOAD_CNT_SHIFT : + BNX2X_PATH0_LOAD_CNT_SHIFT); + u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + + DP(NETIF_MSG_HW, "GLOB_REG=0x%08x\n", val); + + val = (val & mask) >> shift; + + DP(NETIF_MSG_HW, "load_cnt for engine %d = %d\n", engine, val); + + return val; +} + +/* + * Reset the load counter for the current engine. + * + * should be run under rtnl lock + */ +static inline void bnx2x_clear_load_cnt(struct bnx2x *bp) +{ + u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + u32 mask = (BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK : + BNX2X_PATH0_LOAD_CNT_MASK); + + REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val & (~mask)); +} + +static inline void _print_next_block(int idx, const char *blk) +{ + pr_cont("%s%s", idx ? ", " : "", blk); +} + +static inline int bnx2x_check_blocks_with_parity0(u32 sig, int par_num, + bool print) +{ + int i = 0; + u32 cur_bit = 0; + for (i = 0; sig; i++) { + cur_bit = ((u32)0x1 << i); + if (sig & cur_bit) { + switch (cur_bit) { + case AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "BRB"); + break; + case AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "PARSER"); + break; + case AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "TSDM"); + break; + case AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR: + if (print) + _print_next_block(par_num++, + "SEARCHER"); + break; + case AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "TCM"); + break; + case AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "TSEMI"); + break; + case AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "XPB"); + break; + } + + /* Clear the bit */ + sig &= ~cur_bit; + } + } + + return par_num; +} + +static inline int bnx2x_check_blocks_with_parity1(u32 sig, int par_num, + bool *global, bool print) +{ + int i = 0; + u32 cur_bit = 0; + for (i = 0; sig; i++) { + cur_bit = ((u32)0x1 << i); + if (sig & cur_bit) { + switch (cur_bit) { + case AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "PBF"); + break; + case AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "QM"); + break; + case AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "TM"); + break; + case AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "XSDM"); + break; + case AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "XCM"); + break; + case AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "XSEMI"); + break; + case AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR: + if (print) + _print_next_block(par_num++, + "DOORBELLQ"); + break; + case AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "NIG"); + break; + case AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR: + if (print) + _print_next_block(par_num++, + "VAUX PCI CORE"); + *global = true; + break; + case AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "DEBUG"); + break; + case AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "USDM"); + break; + case AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "UCM"); + break; + case AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "USEMI"); + break; + case AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "UPB"); + break; + case AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "CSDM"); + break; + case AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "CCM"); + break; + } + + /* Clear the bit */ + sig &= ~cur_bit; + } + } + + return par_num; +} + +static inline int bnx2x_check_blocks_with_parity2(u32 sig, int par_num, + bool print) +{ + int i = 0; + u32 cur_bit = 0; + for (i = 0; sig; i++) { + cur_bit = ((u32)0x1 << i); + if (sig & cur_bit) { + switch (cur_bit) { + case AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "CSEMI"); + break; + case AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "PXP"); + break; + case AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR: + if (print) + _print_next_block(par_num++, + "PXPPCICLOCKCLIENT"); + break; + case AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "CFC"); + break; + case AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "CDU"); + break; + case AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "DMAE"); + break; + case AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "IGU"); + break; + case AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "MISC"); + break; + } + + /* Clear the bit */ + sig &= ~cur_bit; + } + } + + return par_num; +} + +static inline int bnx2x_check_blocks_with_parity3(u32 sig, int par_num, + bool *global, bool print) +{ + int i = 0; + u32 cur_bit = 0; + for (i = 0; sig; i++) { + cur_bit = ((u32)0x1 << i); + if (sig & cur_bit) { + switch (cur_bit) { + case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY: + if (print) + _print_next_block(par_num++, "MCP ROM"); + *global = true; + break; + case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY: + if (print) + _print_next_block(par_num++, + "MCP UMP RX"); + *global = true; + break; + case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY: + if (print) + _print_next_block(par_num++, + "MCP UMP TX"); + *global = true; + break; + case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY: + if (print) + _print_next_block(par_num++, + "MCP SCPAD"); + *global = true; + break; + } + + /* Clear the bit */ + sig &= ~cur_bit; + } + } + + return par_num; +} + +static inline int bnx2x_check_blocks_with_parity4(u32 sig, int par_num, + bool print) +{ + int i = 0; + u32 cur_bit = 0; + for (i = 0; sig; i++) { + cur_bit = ((u32)0x1 << i); + if (sig & cur_bit) { + switch (cur_bit) { + case AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "PGLUE_B"); + break; + case AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR: + if (print) + _print_next_block(par_num++, "ATC"); + break; + } + + /* Clear the bit */ + sig &= ~cur_bit; + } + } + + return par_num; +} + +static inline bool bnx2x_parity_attn(struct bnx2x *bp, bool *global, bool print, + u32 *sig) +{ + if ((sig[0] & HW_PRTY_ASSERT_SET_0) || + (sig[1] & HW_PRTY_ASSERT_SET_1) || + (sig[2] & HW_PRTY_ASSERT_SET_2) || + (sig[3] & HW_PRTY_ASSERT_SET_3) || + (sig[4] & HW_PRTY_ASSERT_SET_4)) { + int par_num = 0; + DP(NETIF_MSG_HW, "Was parity error: HW block parity attention: " + "[0]:0x%08x [1]:0x%08x [2]:0x%08x [3]:0x%08x " + "[4]:0x%08x\n", + sig[0] & HW_PRTY_ASSERT_SET_0, + sig[1] & HW_PRTY_ASSERT_SET_1, + sig[2] & HW_PRTY_ASSERT_SET_2, + sig[3] & HW_PRTY_ASSERT_SET_3, + sig[4] & HW_PRTY_ASSERT_SET_4); + if (print) + netdev_err(bp->dev, + "Parity errors detected in blocks: "); + par_num = bnx2x_check_blocks_with_parity0( + sig[0] & HW_PRTY_ASSERT_SET_0, par_num, print); + par_num = bnx2x_check_blocks_with_parity1( + sig[1] & HW_PRTY_ASSERT_SET_1, par_num, global, print); + par_num = bnx2x_check_blocks_with_parity2( + sig[2] & HW_PRTY_ASSERT_SET_2, par_num, print); + par_num = bnx2x_check_blocks_with_parity3( + sig[3] & HW_PRTY_ASSERT_SET_3, par_num, global, print); + par_num = bnx2x_check_blocks_with_parity4( + sig[4] & HW_PRTY_ASSERT_SET_4, par_num, print); + + if (print) + pr_cont("\n"); + + return true; + } else + return false; +} + +/** + * bnx2x_chk_parity_attn - checks for parity attentions. + * + * @bp: driver handle + * @global: true if there was a global attention + * @print: show parity attention in syslog + */ +bool bnx2x_chk_parity_attn(struct bnx2x *bp, bool *global, bool print) +{ + struct attn_route attn = { {0} }; + int port = BP_PORT(bp); + + attn.sig[0] = REG_RD(bp, + MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + + port*4); + attn.sig[1] = REG_RD(bp, + MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + + port*4); + attn.sig[2] = REG_RD(bp, + MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + + port*4); + attn.sig[3] = REG_RD(bp, + MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + + port*4); + + if (!CHIP_IS_E1x(bp)) + attn.sig[4] = REG_RD(bp, + MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + + port*4); + + return bnx2x_parity_attn(bp, global, print, attn.sig); +} + + +static inline void bnx2x_attn_int_deasserted4(struct bnx2x *bp, u32 attn) +{ + u32 val; + if (attn & AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT) { + + val = REG_RD(bp, PGLUE_B_REG_PGLUE_B_INT_STS_CLR); + BNX2X_ERR("PGLUE hw attention 0x%x\n", val); + if (val & PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_" + "ADDRESS_ERROR\n"); + if (val & PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_" + "INCORRECT_RCV_BEHAVIOR\n"); + if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_" + "WAS_ERROR_ATTN\n"); + if (val & PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_" + "VF_LENGTH_VIOLATION_ATTN\n"); + if (val & + PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_" + "VF_GRC_SPACE_VIOLATION_ATTN\n"); + if (val & + PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_" + "VF_MSIX_BAR_VIOLATION_ATTN\n"); + if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_" + "TCPL_ERROR_ATTN\n"); + if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_" + "TCPL_IN_TWO_RCBS_ATTN\n"); + if (val & PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW) + BNX2X_ERR("PGLUE_B_PGLUE_B_INT_STS_REG_" + "CSSNOOP_FIFO_OVERFLOW\n"); + } + if (attn & AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT) { + val = REG_RD(bp, ATC_REG_ATC_INT_STS_CLR); + BNX2X_ERR("ATC hw attention 0x%x\n", val); + if (val & ATC_ATC_INT_STS_REG_ADDRESS_ERROR) + BNX2X_ERR("ATC_ATC_INT_STS_REG_ADDRESS_ERROR\n"); + if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND) + BNX2X_ERR("ATC_ATC_INT_STS_REG" + "_ATC_TCPL_TO_NOT_PEND\n"); + if (val & ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS) + BNX2X_ERR("ATC_ATC_INT_STS_REG_" + "ATC_GPA_MULTIPLE_HITS\n"); + if (val & ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT) + BNX2X_ERR("ATC_ATC_INT_STS_REG_" + "ATC_RCPL_TO_EMPTY_CNT\n"); + if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR) + BNX2X_ERR("ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR\n"); + if (val & ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU) + BNX2X_ERR("ATC_ATC_INT_STS_REG_" + "ATC_IREQ_LESS_THAN_STU\n"); + } + + if (attn & (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR | + AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)) { + BNX2X_ERR("FATAL parity attention set4 0x%x\n", + (u32)(attn & (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR | + AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR))); + } + +} + +static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted) +{ + struct attn_route attn, *group_mask; + int port = BP_PORT(bp); + int index; + u32 reg_addr; + u32 val; + u32 aeu_mask; + bool global = false; + + /* need to take HW lock because MCP or other port might also + try to handle this event */ + bnx2x_acquire_alr(bp); + + if (bnx2x_chk_parity_attn(bp, &global, true)) { +#ifndef BNX2X_STOP_ON_ERROR + bp->recovery_state = BNX2X_RECOVERY_INIT; + schedule_delayed_work(&bp->sp_rtnl_task, 0); + /* Disable HW interrupts */ + bnx2x_int_disable(bp); + /* In case of parity errors don't handle attentions so that + * other function would "see" parity errors. + */ +#else + bnx2x_panic(); +#endif + bnx2x_release_alr(bp); + return; + } + + attn.sig[0] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port*4); + attn.sig[1] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port*4); + attn.sig[2] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + port*4); + attn.sig[3] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port*4); + if (!CHIP_IS_E1x(bp)) + attn.sig[4] = + REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + port*4); + else + attn.sig[4] = 0; + + DP(NETIF_MSG_HW, "attn: %08x %08x %08x %08x %08x\n", + attn.sig[0], attn.sig[1], attn.sig[2], attn.sig[3], attn.sig[4]); + + for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) { + if (deasserted & (1 << index)) { + group_mask = &bp->attn_group[index]; + + DP(NETIF_MSG_HW, "group[%d]: %08x %08x " + "%08x %08x %08x\n", + index, + group_mask->sig[0], group_mask->sig[1], + group_mask->sig[2], group_mask->sig[3], + group_mask->sig[4]); + + bnx2x_attn_int_deasserted4(bp, + attn.sig[4] & group_mask->sig[4]); + bnx2x_attn_int_deasserted3(bp, + attn.sig[3] & group_mask->sig[3]); + bnx2x_attn_int_deasserted1(bp, + attn.sig[1] & group_mask->sig[1]); + bnx2x_attn_int_deasserted2(bp, + attn.sig[2] & group_mask->sig[2]); + bnx2x_attn_int_deasserted0(bp, + attn.sig[0] & group_mask->sig[0]); + } + } + + bnx2x_release_alr(bp); + + if (bp->common.int_block == INT_BLOCK_HC) + reg_addr = (HC_REG_COMMAND_REG + port*32 + + COMMAND_REG_ATTN_BITS_CLR); + else + reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_CLR_UPPER*8); + + val = ~deasserted; + DP(NETIF_MSG_HW, "about to mask 0x%08x at %s addr 0x%x\n", val, + (bp->common.int_block == INT_BLOCK_HC) ? "HC" : "IGU", reg_addr); + REG_WR(bp, reg_addr, val); + + if (~bp->attn_state & deasserted) + BNX2X_ERR("IGU ERROR\n"); + + reg_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 : + MISC_REG_AEU_MASK_ATTN_FUNC_0; + + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port); + aeu_mask = REG_RD(bp, reg_addr); + + DP(NETIF_MSG_HW, "aeu_mask %x newly deasserted %x\n", + aeu_mask, deasserted); + aeu_mask |= (deasserted & 0x3ff); + DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask); + + REG_WR(bp, reg_addr, aeu_mask); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port); + + DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state); + bp->attn_state &= ~deasserted; + DP(NETIF_MSG_HW, "new state %x\n", bp->attn_state); +} + +static void bnx2x_attn_int(struct bnx2x *bp) +{ + /* read local copy of bits */ + u32 attn_bits = le32_to_cpu(bp->def_status_blk->atten_status_block. + attn_bits); + u32 attn_ack = le32_to_cpu(bp->def_status_blk->atten_status_block. + attn_bits_ack); + u32 attn_state = bp->attn_state; + + /* look for changed bits */ + u32 asserted = attn_bits & ~attn_ack & ~attn_state; + u32 deasserted = ~attn_bits & attn_ack & attn_state; + + DP(NETIF_MSG_HW, + "attn_bits %x attn_ack %x asserted %x deasserted %x\n", + attn_bits, attn_ack, asserted, deasserted); + + if (~(attn_bits ^ attn_ack) & (attn_bits ^ attn_state)) + BNX2X_ERR("BAD attention state\n"); + + /* handle bits that were raised */ + if (asserted) + bnx2x_attn_int_asserted(bp, asserted); + + if (deasserted) + bnx2x_attn_int_deasserted(bp, deasserted); +} + +void bnx2x_igu_ack_sb(struct bnx2x *bp, u8 igu_sb_id, u8 segment, + u16 index, u8 op, u8 update) +{ + u32 igu_addr = BAR_IGU_INTMEM + (IGU_CMD_INT_ACK_BASE + igu_sb_id)*8; + + bnx2x_igu_ack_sb_gen(bp, igu_sb_id, segment, index, op, update, + igu_addr); +} + +static inline void bnx2x_update_eq_prod(struct bnx2x *bp, u16 prod) +{ + /* No memory barriers */ + storm_memset_eq_prod(bp, prod, BP_FUNC(bp)); + mmiowb(); /* keep prod updates ordered */ +} + +#ifdef BCM_CNIC +static int bnx2x_cnic_handle_cfc_del(struct bnx2x *bp, u32 cid, + union event_ring_elem *elem) +{ + u8 err = elem->message.error; + + if (!bp->cnic_eth_dev.starting_cid || + (cid < bp->cnic_eth_dev.starting_cid && + cid != bp->cnic_eth_dev.iscsi_l2_cid)) + return 1; + + DP(BNX2X_MSG_SP, "got delete ramrod for CNIC CID %d\n", cid); + + if (unlikely(err)) { + + BNX2X_ERR("got delete ramrod for CNIC CID %d with error!\n", + cid); + bnx2x_panic_dump(bp); + } + bnx2x_cnic_cfc_comp(bp, cid, err); + return 0; +} +#endif + +static inline void bnx2x_handle_mcast_eqe(struct bnx2x *bp) +{ + struct bnx2x_mcast_ramrod_params rparam; + int rc; + + memset(&rparam, 0, sizeof(rparam)); + + rparam.mcast_obj = &bp->mcast_obj; + + netif_addr_lock_bh(bp->dev); + + /* Clear pending state for the last command */ + bp->mcast_obj.raw.clear_pending(&bp->mcast_obj.raw); + + /* If there are pending mcast commands - send them */ + if (bp->mcast_obj.check_pending(&bp->mcast_obj)) { + rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_CONT); + if (rc < 0) + BNX2X_ERR("Failed to send pending mcast commands: %d\n", + rc); + } + + netif_addr_unlock_bh(bp->dev); +} + +static inline void bnx2x_handle_classification_eqe(struct bnx2x *bp, + union event_ring_elem *elem) +{ + unsigned long ramrod_flags = 0; + int rc = 0; + u32 cid = elem->message.data.eth_event.echo & BNX2X_SWCID_MASK; + struct bnx2x_vlan_mac_obj *vlan_mac_obj; + + /* Always push next commands out, don't wait here */ + __set_bit(RAMROD_CONT, &ramrod_flags); + + switch (elem->message.data.eth_event.echo >> BNX2X_SWCID_SHIFT) { + case BNX2X_FILTER_MAC_PENDING: +#ifdef BCM_CNIC + if (cid == BNX2X_ISCSI_ETH_CID) + vlan_mac_obj = &bp->iscsi_l2_mac_obj; + else +#endif + vlan_mac_obj = &bp->fp[cid].mac_obj; + + break; + case BNX2X_FILTER_MCAST_PENDING: + /* This is only relevant for 57710 where multicast MACs are + * configured as unicast MACs using the same ramrod. + */ + bnx2x_handle_mcast_eqe(bp); + return; + default: + BNX2X_ERR("Unsupported classification command: %d\n", + elem->message.data.eth_event.echo); + return; + } + + rc = vlan_mac_obj->complete(bp, vlan_mac_obj, elem, &ramrod_flags); + + if (rc < 0) + BNX2X_ERR("Failed to schedule new commands: %d\n", rc); + else if (rc > 0) + DP(BNX2X_MSG_SP, "Scheduled next pending commands...\n"); + +} + +#ifdef BCM_CNIC +static void bnx2x_set_iscsi_eth_rx_mode(struct bnx2x *bp, bool start); +#endif + +static inline void bnx2x_handle_rx_mode_eqe(struct bnx2x *bp) +{ + netif_addr_lock_bh(bp->dev); + + clear_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state); + + /* Send rx_mode command again if was requested */ + if (test_and_clear_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state)) + bnx2x_set_storm_rx_mode(bp); +#ifdef BCM_CNIC + else if (test_and_clear_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED, + &bp->sp_state)) + bnx2x_set_iscsi_eth_rx_mode(bp, true); + else if (test_and_clear_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, + &bp->sp_state)) + bnx2x_set_iscsi_eth_rx_mode(bp, false); +#endif + + netif_addr_unlock_bh(bp->dev); +} + +static inline struct bnx2x_queue_sp_obj *bnx2x_cid_to_q_obj( + struct bnx2x *bp, u32 cid) +{ + DP(BNX2X_MSG_SP, "retrieving fp from cid %d\n", cid); +#ifdef BCM_CNIC + if (cid == BNX2X_FCOE_ETH_CID) + return &bnx2x_fcoe(bp, q_obj); + else +#endif + return &bnx2x_fp(bp, CID_TO_FP(cid), q_obj); +} + +static void bnx2x_eq_int(struct bnx2x *bp) +{ + u16 hw_cons, sw_cons, sw_prod; + union event_ring_elem *elem; + u32 cid; + u8 opcode; + int spqe_cnt = 0; + struct bnx2x_queue_sp_obj *q_obj; + struct bnx2x_func_sp_obj *f_obj = &bp->func_obj; + struct bnx2x_raw_obj *rss_raw = &bp->rss_conf_obj.raw; + + hw_cons = le16_to_cpu(*bp->eq_cons_sb); + + /* The hw_cos range is 1-255, 257 - the sw_cons range is 0-254, 256. + * when we get the the next-page we nned to adjust so the loop + * condition below will be met. The next element is the size of a + * regular element and hence incrementing by 1 + */ + if ((hw_cons & EQ_DESC_MAX_PAGE) == EQ_DESC_MAX_PAGE) + hw_cons++; + + /* This function may never run in parallel with itself for a + * specific bp, thus there is no need in "paired" read memory + * barrier here. + */ + sw_cons = bp->eq_cons; + sw_prod = bp->eq_prod; + + DP(BNX2X_MSG_SP, "EQ: hw_cons %u sw_cons %u bp->eq_spq_left %x\n", + hw_cons, sw_cons, atomic_read(&bp->eq_spq_left)); + + for (; sw_cons != hw_cons; + sw_prod = NEXT_EQ_IDX(sw_prod), sw_cons = NEXT_EQ_IDX(sw_cons)) { + + + elem = &bp->eq_ring[EQ_DESC(sw_cons)]; + + cid = SW_CID(elem->message.data.cfc_del_event.cid); + opcode = elem->message.opcode; + + + /* handle eq element */ + switch (opcode) { + case EVENT_RING_OPCODE_STAT_QUERY: + DP(NETIF_MSG_TIMER, "got statistics comp event %d\n", + bp->stats_comp++); + /* nothing to do with stats comp */ + goto next_spqe; + + case EVENT_RING_OPCODE_CFC_DEL: + /* handle according to cid range */ + /* + * we may want to verify here that the bp state is + * HALTING + */ + DP(BNX2X_MSG_SP, + "got delete ramrod for MULTI[%d]\n", cid); +#ifdef BCM_CNIC + if (!bnx2x_cnic_handle_cfc_del(bp, cid, elem)) + goto next_spqe; +#endif + q_obj = bnx2x_cid_to_q_obj(bp, cid); + + if (q_obj->complete_cmd(bp, q_obj, BNX2X_Q_CMD_CFC_DEL)) + break; + + + + goto next_spqe; + + case EVENT_RING_OPCODE_STOP_TRAFFIC: + DP(BNX2X_MSG_SP, "got STOP TRAFFIC\n"); + if (f_obj->complete_cmd(bp, f_obj, + BNX2X_F_CMD_TX_STOP)) + break; + bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_TX_PAUSED); + goto next_spqe; + + case EVENT_RING_OPCODE_START_TRAFFIC: + DP(BNX2X_MSG_SP, "got START TRAFFIC\n"); + if (f_obj->complete_cmd(bp, f_obj, + BNX2X_F_CMD_TX_START)) + break; + bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_TX_RELEASED); + goto next_spqe; + case EVENT_RING_OPCODE_FUNCTION_START: + DP(BNX2X_MSG_SP, "got FUNC_START ramrod\n"); + if (f_obj->complete_cmd(bp, f_obj, BNX2X_F_CMD_START)) + break; + + goto next_spqe; + + case EVENT_RING_OPCODE_FUNCTION_STOP: + DP(BNX2X_MSG_SP, "got FUNC_STOP ramrod\n"); + if (f_obj->complete_cmd(bp, f_obj, BNX2X_F_CMD_STOP)) + break; + + goto next_spqe; + } + + switch (opcode | bp->state) { + case (EVENT_RING_OPCODE_RSS_UPDATE_RULES | + BNX2X_STATE_OPEN): + case (EVENT_RING_OPCODE_RSS_UPDATE_RULES | + BNX2X_STATE_OPENING_WAIT4_PORT): + cid = elem->message.data.eth_event.echo & + BNX2X_SWCID_MASK; + DP(BNX2X_MSG_SP, "got RSS_UPDATE ramrod. CID %d\n", + cid); + rss_raw->clear_pending(rss_raw); + break; + + case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_OPEN): + case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_DIAG): + case (EVENT_RING_OPCODE_SET_MAC | + BNX2X_STATE_CLOSING_WAIT4_HALT): + case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | + BNX2X_STATE_OPEN): + case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | + BNX2X_STATE_DIAG): + case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | + BNX2X_STATE_CLOSING_WAIT4_HALT): + DP(BNX2X_MSG_SP, "got (un)set mac ramrod\n"); + bnx2x_handle_classification_eqe(bp, elem); + break; + + case (EVENT_RING_OPCODE_MULTICAST_RULES | + BNX2X_STATE_OPEN): + case (EVENT_RING_OPCODE_MULTICAST_RULES | + BNX2X_STATE_DIAG): + case (EVENT_RING_OPCODE_MULTICAST_RULES | + BNX2X_STATE_CLOSING_WAIT4_HALT): + DP(BNX2X_MSG_SP, "got mcast ramrod\n"); + bnx2x_handle_mcast_eqe(bp); + break; + + case (EVENT_RING_OPCODE_FILTERS_RULES | + BNX2X_STATE_OPEN): + case (EVENT_RING_OPCODE_FILTERS_RULES | + BNX2X_STATE_DIAG): + case (EVENT_RING_OPCODE_FILTERS_RULES | + BNX2X_STATE_CLOSING_WAIT4_HALT): + DP(BNX2X_MSG_SP, "got rx_mode ramrod\n"); + bnx2x_handle_rx_mode_eqe(bp); + break; + default: + /* unknown event log error and continue */ + BNX2X_ERR("Unknown EQ event %d, bp->state 0x%x\n", + elem->message.opcode, bp->state); + } +next_spqe: + spqe_cnt++; + } /* for */ + + smp_mb__before_atomic_inc(); + atomic_add(spqe_cnt, &bp->eq_spq_left); + + bp->eq_cons = sw_cons; + bp->eq_prod = sw_prod; + /* Make sure that above mem writes were issued towards the memory */ + smp_wmb(); + + /* update producer */ + bnx2x_update_eq_prod(bp, bp->eq_prod); +} + +static void bnx2x_sp_task(struct work_struct *work) +{ + struct bnx2x *bp = container_of(work, struct bnx2x, sp_task.work); + u16 status; + + status = bnx2x_update_dsb_idx(bp); +/* if (status == 0) */ +/* BNX2X_ERR("spurious slowpath interrupt!\n"); */ + + DP(NETIF_MSG_INTR, "got a slowpath interrupt (status 0x%x)\n", status); + + /* HW attentions */ + if (status & BNX2X_DEF_SB_ATT_IDX) { + bnx2x_attn_int(bp); + status &= ~BNX2X_DEF_SB_ATT_IDX; + } + + /* SP events: STAT_QUERY and others */ + if (status & BNX2X_DEF_SB_IDX) { +#ifdef BCM_CNIC + struct bnx2x_fastpath *fp = bnx2x_fcoe_fp(bp); + + if ((!NO_FCOE(bp)) && + (bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))) { + /* + * Prevent local bottom-halves from running as + * we are going to change the local NAPI list. + */ + local_bh_disable(); + napi_schedule(&bnx2x_fcoe(bp, napi)); + local_bh_enable(); + } +#endif + /* Handle EQ completions */ + bnx2x_eq_int(bp); + + bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID, + le16_to_cpu(bp->def_idx), IGU_INT_NOP, 1); + + status &= ~BNX2X_DEF_SB_IDX; + } + + if (unlikely(status)) + DP(NETIF_MSG_INTR, "got an unknown interrupt! (status 0x%x)\n", + status); + + bnx2x_ack_sb(bp, bp->igu_dsb_id, ATTENTION_ID, + le16_to_cpu(bp->def_att_idx), IGU_INT_ENABLE, 1); +} + +irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance) +{ + struct net_device *dev = dev_instance; + struct bnx2x *bp = netdev_priv(dev); + + bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID, 0, + IGU_INT_DISABLE, 0); + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) + return IRQ_HANDLED; +#endif + +#ifdef BCM_CNIC + { + struct cnic_ops *c_ops; + + rcu_read_lock(); + c_ops = rcu_dereference(bp->cnic_ops); + if (c_ops) + c_ops->cnic_handler(bp->cnic_data, NULL); + rcu_read_unlock(); + } +#endif + queue_delayed_work(bnx2x_wq, &bp->sp_task, 0); + + return IRQ_HANDLED; +} + +/* end of slow path */ + + +void bnx2x_drv_pulse(struct bnx2x *bp) +{ + SHMEM_WR(bp, func_mb[BP_FW_MB_IDX(bp)].drv_pulse_mb, + bp->fw_drv_pulse_wr_seq); +} + + +static void bnx2x_timer(unsigned long data) +{ + u8 cos; + struct bnx2x *bp = (struct bnx2x *) data; + + if (!netif_running(bp->dev)) + return; + + if (poll) { + struct bnx2x_fastpath *fp = &bp->fp[0]; + + for_each_cos_in_tx_queue(fp, cos) + bnx2x_tx_int(bp, &fp->txdata[cos]); + bnx2x_rx_int(fp, 1000); + } + + if (!BP_NOMCP(bp)) { + int mb_idx = BP_FW_MB_IDX(bp); + u32 drv_pulse; + u32 mcp_pulse; + + ++bp->fw_drv_pulse_wr_seq; + bp->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK; + /* TBD - add SYSTEM_TIME */ + drv_pulse = bp->fw_drv_pulse_wr_seq; + bnx2x_drv_pulse(bp); + + mcp_pulse = (SHMEM_RD(bp, func_mb[mb_idx].mcp_pulse_mb) & + MCP_PULSE_SEQ_MASK); + /* The delta between driver pulse and mcp response + * should be 1 (before mcp response) or 0 (after mcp response) + */ + if ((drv_pulse != mcp_pulse) && + (drv_pulse != ((mcp_pulse + 1) & MCP_PULSE_SEQ_MASK))) { + /* someone lost a heartbeat... */ + BNX2X_ERR("drv_pulse (0x%x) != mcp_pulse (0x%x)\n", + drv_pulse, mcp_pulse); + } + } + + if (bp->state == BNX2X_STATE_OPEN) + bnx2x_stats_handle(bp, STATS_EVENT_UPDATE); + + mod_timer(&bp->timer, jiffies + bp->current_interval); +} + +/* end of Statistics */ + +/* nic init */ + +/* + * nic init service functions + */ + +static inline void bnx2x_fill(struct bnx2x *bp, u32 addr, int fill, u32 len) +{ + u32 i; + if (!(len%4) && !(addr%4)) + for (i = 0; i < len; i += 4) + REG_WR(bp, addr + i, fill); + else + for (i = 0; i < len; i++) + REG_WR8(bp, addr + i, fill); + +} + +/* helper: writes FP SP data to FW - data_size in dwords */ +static inline void bnx2x_wr_fp_sb_data(struct bnx2x *bp, + int fw_sb_id, + u32 *sb_data_p, + u32 data_size) +{ + int index; + for (index = 0; index < data_size; index++) + REG_WR(bp, BAR_CSTRORM_INTMEM + + CSTORM_STATUS_BLOCK_DATA_OFFSET(fw_sb_id) + + sizeof(u32)*index, + *(sb_data_p + index)); +} + +static inline void bnx2x_zero_fp_sb(struct bnx2x *bp, int fw_sb_id) +{ + u32 *sb_data_p; + u32 data_size = 0; + struct hc_status_block_data_e2 sb_data_e2; + struct hc_status_block_data_e1x sb_data_e1x; + + /* disable the function first */ + if (!CHIP_IS_E1x(bp)) { + memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2)); + sb_data_e2.common.state = SB_DISABLED; + sb_data_e2.common.p_func.vf_valid = false; + sb_data_p = (u32 *)&sb_data_e2; + data_size = sizeof(struct hc_status_block_data_e2)/sizeof(u32); + } else { + memset(&sb_data_e1x, 0, + sizeof(struct hc_status_block_data_e1x)); + sb_data_e1x.common.state = SB_DISABLED; + sb_data_e1x.common.p_func.vf_valid = false; + sb_data_p = (u32 *)&sb_data_e1x; + data_size = sizeof(struct hc_status_block_data_e1x)/sizeof(u32); + } + bnx2x_wr_fp_sb_data(bp, fw_sb_id, sb_data_p, data_size); + + bnx2x_fill(bp, BAR_CSTRORM_INTMEM + + CSTORM_STATUS_BLOCK_OFFSET(fw_sb_id), 0, + CSTORM_STATUS_BLOCK_SIZE); + bnx2x_fill(bp, BAR_CSTRORM_INTMEM + + CSTORM_SYNC_BLOCK_OFFSET(fw_sb_id), 0, + CSTORM_SYNC_BLOCK_SIZE); +} + +/* helper: writes SP SB data to FW */ +static inline void bnx2x_wr_sp_sb_data(struct bnx2x *bp, + struct hc_sp_status_block_data *sp_sb_data) +{ + int func = BP_FUNC(bp); + int i; + for (i = 0; i < sizeof(struct hc_sp_status_block_data)/sizeof(u32); i++) + REG_WR(bp, BAR_CSTRORM_INTMEM + + CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(func) + + i*sizeof(u32), + *((u32 *)sp_sb_data + i)); +} + +static inline void bnx2x_zero_sp_sb(struct bnx2x *bp) +{ + int func = BP_FUNC(bp); + struct hc_sp_status_block_data sp_sb_data; + memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data)); + + sp_sb_data.state = SB_DISABLED; + sp_sb_data.p_func.vf_valid = false; + + bnx2x_wr_sp_sb_data(bp, &sp_sb_data); + + bnx2x_fill(bp, BAR_CSTRORM_INTMEM + + CSTORM_SP_STATUS_BLOCK_OFFSET(func), 0, + CSTORM_SP_STATUS_BLOCK_SIZE); + bnx2x_fill(bp, BAR_CSTRORM_INTMEM + + CSTORM_SP_SYNC_BLOCK_OFFSET(func), 0, + CSTORM_SP_SYNC_BLOCK_SIZE); + +} + + +static inline +void bnx2x_setup_ndsb_state_machine(struct hc_status_block_sm *hc_sm, + int igu_sb_id, int igu_seg_id) +{ + hc_sm->igu_sb_id = igu_sb_id; + hc_sm->igu_seg_id = igu_seg_id; + hc_sm->timer_value = 0xFF; + hc_sm->time_to_expire = 0xFFFFFFFF; +} + + +/* allocates state machine ids. */ +static inline +void bnx2x_map_sb_state_machines(struct hc_index_data *index_data) +{ + /* zero out state machine indices */ + /* rx indices */ + index_data[HC_INDEX_ETH_RX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID; + + /* tx indices */ + index_data[HC_INDEX_OOO_TX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags &= ~HC_INDEX_DATA_SM_ID; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags &= ~HC_INDEX_DATA_SM_ID; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags &= ~HC_INDEX_DATA_SM_ID; + + /* map indices */ + /* rx indices */ + index_data[HC_INDEX_ETH_RX_CQ_CONS].flags |= + SM_RX_ID << HC_INDEX_DATA_SM_ID_SHIFT; + + /* tx indices */ + index_data[HC_INDEX_OOO_TX_CQ_CONS].flags |= + SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags |= + SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags |= + SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags |= + SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; +} + +static void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid, + u8 vf_valid, int fw_sb_id, int igu_sb_id) +{ + int igu_seg_id; + + struct hc_status_block_data_e2 sb_data_e2; + struct hc_status_block_data_e1x sb_data_e1x; + struct hc_status_block_sm *hc_sm_p; + int data_size; + u32 *sb_data_p; + + if (CHIP_INT_MODE_IS_BC(bp)) + igu_seg_id = HC_SEG_ACCESS_NORM; + else + igu_seg_id = IGU_SEG_ACCESS_NORM; + + bnx2x_zero_fp_sb(bp, fw_sb_id); + + if (!CHIP_IS_E1x(bp)) { + memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2)); + sb_data_e2.common.state = SB_ENABLED; + sb_data_e2.common.p_func.pf_id = BP_FUNC(bp); + sb_data_e2.common.p_func.vf_id = vfid; + sb_data_e2.common.p_func.vf_valid = vf_valid; + sb_data_e2.common.p_func.vnic_id = BP_VN(bp); + sb_data_e2.common.same_igu_sb_1b = true; + sb_data_e2.common.host_sb_addr.hi = U64_HI(mapping); + sb_data_e2.common.host_sb_addr.lo = U64_LO(mapping); + hc_sm_p = sb_data_e2.common.state_machine; + sb_data_p = (u32 *)&sb_data_e2; + data_size = sizeof(struct hc_status_block_data_e2)/sizeof(u32); + bnx2x_map_sb_state_machines(sb_data_e2.index_data); + } else { + memset(&sb_data_e1x, 0, + sizeof(struct hc_status_block_data_e1x)); + sb_data_e1x.common.state = SB_ENABLED; + sb_data_e1x.common.p_func.pf_id = BP_FUNC(bp); + sb_data_e1x.common.p_func.vf_id = 0xff; + sb_data_e1x.common.p_func.vf_valid = false; + sb_data_e1x.common.p_func.vnic_id = BP_VN(bp); + sb_data_e1x.common.same_igu_sb_1b = true; + sb_data_e1x.common.host_sb_addr.hi = U64_HI(mapping); + sb_data_e1x.common.host_sb_addr.lo = U64_LO(mapping); + hc_sm_p = sb_data_e1x.common.state_machine; + sb_data_p = (u32 *)&sb_data_e1x; + data_size = sizeof(struct hc_status_block_data_e1x)/sizeof(u32); + bnx2x_map_sb_state_machines(sb_data_e1x.index_data); + } + + bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_RX_ID], + igu_sb_id, igu_seg_id); + bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_TX_ID], + igu_sb_id, igu_seg_id); + + DP(NETIF_MSG_HW, "Init FW SB %d\n", fw_sb_id); + + /* write indecies to HW */ + bnx2x_wr_fp_sb_data(bp, fw_sb_id, sb_data_p, data_size); +} + +static void bnx2x_update_coalesce_sb(struct bnx2x *bp, u8 fw_sb_id, + u16 tx_usec, u16 rx_usec) +{ + bnx2x_update_coalesce_sb_index(bp, fw_sb_id, HC_INDEX_ETH_RX_CQ_CONS, + false, rx_usec); + bnx2x_update_coalesce_sb_index(bp, fw_sb_id, + HC_INDEX_ETH_TX_CQ_CONS_COS0, false, + tx_usec); + bnx2x_update_coalesce_sb_index(bp, fw_sb_id, + HC_INDEX_ETH_TX_CQ_CONS_COS1, false, + tx_usec); + bnx2x_update_coalesce_sb_index(bp, fw_sb_id, + HC_INDEX_ETH_TX_CQ_CONS_COS2, false, + tx_usec); +} + +static void bnx2x_init_def_sb(struct bnx2x *bp) +{ + struct host_sp_status_block *def_sb = bp->def_status_blk; + dma_addr_t mapping = bp->def_status_blk_mapping; + int igu_sp_sb_index; + int igu_seg_id; + int port = BP_PORT(bp); + int func = BP_FUNC(bp); - int reg_offset; ++ int reg_offset, reg_offset_en5; + u64 section; + int index; + struct hc_sp_status_block_data sp_sb_data; + memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data)); + + if (CHIP_INT_MODE_IS_BC(bp)) { + igu_sp_sb_index = DEF_SB_IGU_ID; + igu_seg_id = HC_SEG_ACCESS_DEF; + } else { + igu_sp_sb_index = bp->igu_dsb_id; + igu_seg_id = IGU_SEG_ACCESS_DEF; + } + + /* ATTN */ + section = ((u64)mapping) + offsetof(struct host_sp_status_block, + atten_status_block); + def_sb->atten_status_block.status_block_id = igu_sp_sb_index; + + bp->attn_state = 0; + + reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 : + MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); ++ reg_offset_en5 = (port ? MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 : ++ MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0); + for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) { + int sindex; + /* take care of sig[0]..sig[4] */ + for (sindex = 0; sindex < 4; sindex++) + bp->attn_group[index].sig[sindex] = + REG_RD(bp, reg_offset + sindex*0x4 + 0x10*index); + + if (!CHIP_IS_E1x(bp)) + /* + * enable5 is separate from the rest of the registers, + * and therefore the address skip is 4 + * and not 16 between the different groups + */ + bp->attn_group[index].sig[4] = REG_RD(bp, - reg_offset + 0x10 + 0x4*index); ++ reg_offset_en5 + 0x4*index); + else + bp->attn_group[index].sig[4] = 0; + } + + if (bp->common.int_block == INT_BLOCK_HC) { + reg_offset = (port ? HC_REG_ATTN_MSG1_ADDR_L : + HC_REG_ATTN_MSG0_ADDR_L); + + REG_WR(bp, reg_offset, U64_LO(section)); + REG_WR(bp, reg_offset + 4, U64_HI(section)); + } else if (!CHIP_IS_E1x(bp)) { + REG_WR(bp, IGU_REG_ATTN_MSG_ADDR_L, U64_LO(section)); + REG_WR(bp, IGU_REG_ATTN_MSG_ADDR_H, U64_HI(section)); + } + + section = ((u64)mapping) + offsetof(struct host_sp_status_block, + sp_sb); + + bnx2x_zero_sp_sb(bp); + + sp_sb_data.state = SB_ENABLED; + sp_sb_data.host_sb_addr.lo = U64_LO(section); + sp_sb_data.host_sb_addr.hi = U64_HI(section); + sp_sb_data.igu_sb_id = igu_sp_sb_index; + sp_sb_data.igu_seg_id = igu_seg_id; + sp_sb_data.p_func.pf_id = func; + sp_sb_data.p_func.vnic_id = BP_VN(bp); + sp_sb_data.p_func.vf_id = 0xff; + + bnx2x_wr_sp_sb_data(bp, &sp_sb_data); + + bnx2x_ack_sb(bp, bp->igu_dsb_id, USTORM_ID, 0, IGU_INT_ENABLE, 0); +} + +void bnx2x_update_coalesce(struct bnx2x *bp) +{ + int i; + + for_each_eth_queue(bp, i) + bnx2x_update_coalesce_sb(bp, bp->fp[i].fw_sb_id, + bp->tx_ticks, bp->rx_ticks); +} + +static void bnx2x_init_sp_ring(struct bnx2x *bp) +{ + spin_lock_init(&bp->spq_lock); + atomic_set(&bp->cq_spq_left, MAX_SPQ_PENDING); + + bp->spq_prod_idx = 0; + bp->dsb_sp_prod = BNX2X_SP_DSB_INDEX; + bp->spq_prod_bd = bp->spq; + bp->spq_last_bd = bp->spq_prod_bd + MAX_SP_DESC_CNT; +} + +static void bnx2x_init_eq_ring(struct bnx2x *bp) +{ + int i; + for (i = 1; i <= NUM_EQ_PAGES; i++) { + union event_ring_elem *elem = + &bp->eq_ring[EQ_DESC_CNT_PAGE * i - 1]; + + elem->next_page.addr.hi = + cpu_to_le32(U64_HI(bp->eq_mapping + + BCM_PAGE_SIZE * (i % NUM_EQ_PAGES))); + elem->next_page.addr.lo = + cpu_to_le32(U64_LO(bp->eq_mapping + + BCM_PAGE_SIZE*(i % NUM_EQ_PAGES))); + } + bp->eq_cons = 0; + bp->eq_prod = NUM_EQ_DESC; + bp->eq_cons_sb = BNX2X_EQ_INDEX; + /* we want a warning message before it gets rought... */ + atomic_set(&bp->eq_spq_left, + min_t(int, MAX_SP_DESC_CNT - MAX_SPQ_PENDING, NUM_EQ_DESC) - 1); +} + + +/* called with netif_addr_lock_bh() */ +void bnx2x_set_q_rx_mode(struct bnx2x *bp, u8 cl_id, + unsigned long rx_mode_flags, + unsigned long rx_accept_flags, + unsigned long tx_accept_flags, + unsigned long ramrod_flags) +{ + struct bnx2x_rx_mode_ramrod_params ramrod_param; + int rc; + + memset(&ramrod_param, 0, sizeof(ramrod_param)); + + /* Prepare ramrod parameters */ + ramrod_param.cid = 0; + ramrod_param.cl_id = cl_id; + ramrod_param.rx_mode_obj = &bp->rx_mode_obj; + ramrod_param.func_id = BP_FUNC(bp); + + ramrod_param.pstate = &bp->sp_state; + ramrod_param.state = BNX2X_FILTER_RX_MODE_PENDING; + + ramrod_param.rdata = bnx2x_sp(bp, rx_mode_rdata); + ramrod_param.rdata_mapping = bnx2x_sp_mapping(bp, rx_mode_rdata); + + set_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state); + + ramrod_param.ramrod_flags = ramrod_flags; + ramrod_param.rx_mode_flags = rx_mode_flags; + + ramrod_param.rx_accept_flags = rx_accept_flags; + ramrod_param.tx_accept_flags = tx_accept_flags; + + rc = bnx2x_config_rx_mode(bp, &ramrod_param); + if (rc < 0) { + BNX2X_ERR("Set rx_mode %d failed\n", bp->rx_mode); + return; + } +} + +/* called with netif_addr_lock_bh() */ +void bnx2x_set_storm_rx_mode(struct bnx2x *bp) +{ + unsigned long rx_mode_flags = 0, ramrod_flags = 0; + unsigned long rx_accept_flags = 0, tx_accept_flags = 0; + +#ifdef BCM_CNIC + if (!NO_FCOE(bp)) + + /* Configure rx_mode of FCoE Queue */ + __set_bit(BNX2X_RX_MODE_FCOE_ETH, &rx_mode_flags); +#endif + + switch (bp->rx_mode) { + case BNX2X_RX_MODE_NONE: + /* + * 'drop all' supersedes any accept flags that may have been + * passed to the function. + */ + break; + case BNX2X_RX_MODE_NORMAL: + __set_bit(BNX2X_ACCEPT_UNICAST, &rx_accept_flags); + __set_bit(BNX2X_ACCEPT_MULTICAST, &rx_accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, &rx_accept_flags); + + /* internal switching mode */ + __set_bit(BNX2X_ACCEPT_UNICAST, &tx_accept_flags); + __set_bit(BNX2X_ACCEPT_MULTICAST, &tx_accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, &tx_accept_flags); + + break; + case BNX2X_RX_MODE_ALLMULTI: + __set_bit(BNX2X_ACCEPT_UNICAST, &rx_accept_flags); + __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &rx_accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, &rx_accept_flags); + + /* internal switching mode */ + __set_bit(BNX2X_ACCEPT_UNICAST, &tx_accept_flags); + __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &tx_accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, &tx_accept_flags); + + break; + case BNX2X_RX_MODE_PROMISC: + /* According to deffinition of SI mode, iface in promisc mode + * should receive matched and unmatched (in resolution of port) + * unicast packets. + */ + __set_bit(BNX2X_ACCEPT_UNMATCHED, &rx_accept_flags); + __set_bit(BNX2X_ACCEPT_UNICAST, &rx_accept_flags); + __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &rx_accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, &rx_accept_flags); + + /* internal switching mode */ + __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &tx_accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, &tx_accept_flags); + + if (IS_MF_SI(bp)) + __set_bit(BNX2X_ACCEPT_ALL_UNICAST, &tx_accept_flags); + else + __set_bit(BNX2X_ACCEPT_UNICAST, &tx_accept_flags); + + break; + default: + BNX2X_ERR("Unknown rx_mode: %d\n", bp->rx_mode); + return; + } + + if (bp->rx_mode != BNX2X_RX_MODE_NONE) { + __set_bit(BNX2X_ACCEPT_ANY_VLAN, &rx_accept_flags); + __set_bit(BNX2X_ACCEPT_ANY_VLAN, &tx_accept_flags); + } + + __set_bit(RAMROD_RX, &ramrod_flags); + __set_bit(RAMROD_TX, &ramrod_flags); + + bnx2x_set_q_rx_mode(bp, bp->fp->cl_id, rx_mode_flags, rx_accept_flags, + tx_accept_flags, ramrod_flags); +} + +static void bnx2x_init_internal_common(struct bnx2x *bp) +{ + int i; + + if (IS_MF_SI(bp)) + /* + * In switch independent mode, the TSTORM needs to accept + * packets that failed classification, since approximate match + * mac addresses aren't written to NIG LLH + */ + REG_WR8(bp, BAR_TSTRORM_INTMEM + + TSTORM_ACCEPT_CLASSIFY_FAILED_OFFSET, 2); + else if (!CHIP_IS_E1(bp)) /* 57710 doesn't support MF */ + REG_WR8(bp, BAR_TSTRORM_INTMEM + + TSTORM_ACCEPT_CLASSIFY_FAILED_OFFSET, 0); + + /* Zero this manually as its initialization is + currently missing in the initTool */ + for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++) + REG_WR(bp, BAR_USTRORM_INTMEM + + USTORM_AGG_DATA_OFFSET + i * 4, 0); + if (!CHIP_IS_E1x(bp)) { + REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_IGU_MODE_OFFSET, + CHIP_INT_MODE_IS_BC(bp) ? + HC_IGU_BC_MODE : HC_IGU_NBC_MODE); + } +} + +static void bnx2x_init_internal(struct bnx2x *bp, u32 load_code) +{ + switch (load_code) { + case FW_MSG_CODE_DRV_LOAD_COMMON: + case FW_MSG_CODE_DRV_LOAD_COMMON_CHIP: + bnx2x_init_internal_common(bp); + /* no break */ + + case FW_MSG_CODE_DRV_LOAD_PORT: + /* nothing to do */ + /* no break */ + + case FW_MSG_CODE_DRV_LOAD_FUNCTION: + /* internal memory per function is + initialized inside bnx2x_pf_init */ + break; + + default: + BNX2X_ERR("Unknown load_code (0x%x) from MCP\n", load_code); + break; + } +} + +static inline u8 bnx2x_fp_igu_sb_id(struct bnx2x_fastpath *fp) +{ + return fp->bp->igu_base_sb + fp->index + CNIC_PRESENT; +} + +static inline u8 bnx2x_fp_fw_sb_id(struct bnx2x_fastpath *fp) +{ + return fp->bp->base_fw_ndsb + fp->index + CNIC_PRESENT; +} + +static inline u8 bnx2x_fp_cl_id(struct bnx2x_fastpath *fp) +{ + if (CHIP_IS_E1x(fp->bp)) + return BP_L_ID(fp->bp) + fp->index; + else /* We want Client ID to be the same as IGU SB ID for 57712 */ + return bnx2x_fp_igu_sb_id(fp); +} + +static void bnx2x_init_eth_fp(struct bnx2x *bp, int fp_idx) +{ + struct bnx2x_fastpath *fp = &bp->fp[fp_idx]; + u8 cos; + unsigned long q_type = 0; + u32 cids[BNX2X_MULTI_TX_COS] = { 0 }; + + fp->cid = fp_idx; + fp->cl_id = bnx2x_fp_cl_id(fp); + fp->fw_sb_id = bnx2x_fp_fw_sb_id(fp); + fp->igu_sb_id = bnx2x_fp_igu_sb_id(fp); + /* qZone id equals to FW (per path) client id */ + fp->cl_qzone_id = bnx2x_fp_qzone_id(fp); + + /* init shortcut */ + fp->ustorm_rx_prods_offset = bnx2x_rx_ustorm_prods_offset(fp); + /* Setup SB indicies */ + fp->rx_cons_sb = BNX2X_RX_SB_INDEX; + + /* Configure Queue State object */ + __set_bit(BNX2X_Q_TYPE_HAS_RX, &q_type); + __set_bit(BNX2X_Q_TYPE_HAS_TX, &q_type); + + BUG_ON(fp->max_cos > BNX2X_MULTI_TX_COS); + + /* init tx data */ + for_each_cos_in_tx_queue(fp, cos) { + bnx2x_init_txdata(bp, &fp->txdata[cos], + CID_COS_TO_TX_ONLY_CID(fp->cid, cos), + FP_COS_TO_TXQ(fp, cos), + BNX2X_TX_SB_INDEX_BASE + cos); + cids[cos] = fp->txdata[cos].cid; + } + + bnx2x_init_queue_obj(bp, &fp->q_obj, fp->cl_id, cids, fp->max_cos, + BP_FUNC(bp), bnx2x_sp(bp, q_rdata), + bnx2x_sp_mapping(bp, q_rdata), q_type); + + /** + * Configure classification DBs: Always enable Tx switching + */ + bnx2x_init_vlan_mac_fp_objs(fp, BNX2X_OBJ_TYPE_RX_TX); + + DP(NETIF_MSG_IFUP, "queue[%d]: bnx2x_init_sb(%p,%p) " + "cl_id %d fw_sb %d igu_sb %d\n", + fp_idx, bp, fp->status_blk.e2_sb, fp->cl_id, fp->fw_sb_id, + fp->igu_sb_id); + bnx2x_init_sb(bp, fp->status_blk_mapping, BNX2X_VF_ID_INVALID, false, + fp->fw_sb_id, fp->igu_sb_id); + + bnx2x_update_fpsb_idx(fp); +} + +void bnx2x_nic_init(struct bnx2x *bp, u32 load_code) +{ + int i; + + for_each_eth_queue(bp, i) + bnx2x_init_eth_fp(bp, i); +#ifdef BCM_CNIC + if (!NO_FCOE(bp)) + bnx2x_init_fcoe_fp(bp); + + bnx2x_init_sb(bp, bp->cnic_sb_mapping, + BNX2X_VF_ID_INVALID, false, + bnx2x_cnic_fw_sb_id(bp), bnx2x_cnic_igu_sb_id(bp)); + +#endif + + /* Initialize MOD_ABS interrupts */ + bnx2x_init_mod_abs_int(bp, &bp->link_vars, bp->common.chip_id, + bp->common.shmem_base, bp->common.shmem2_base, + BP_PORT(bp)); + /* ensure status block indices were read */ + rmb(); + + bnx2x_init_def_sb(bp); + bnx2x_update_dsb_idx(bp); + bnx2x_init_rx_rings(bp); + bnx2x_init_tx_rings(bp); + bnx2x_init_sp_ring(bp); + bnx2x_init_eq_ring(bp); + bnx2x_init_internal(bp, load_code); + bnx2x_pf_init(bp); + bnx2x_stats_init(bp); + + /* flush all before enabling interrupts */ + mb(); + mmiowb(); + + bnx2x_int_enable(bp); + + /* Check for SPIO5 */ + bnx2x_attn_int_deasserted0(bp, + REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + BP_PORT(bp)*4) & + AEU_INPUTS_ATTN_BITS_SPIO5); +} + +/* end of nic init */ + +/* + * gzip service functions + */ + +static int bnx2x_gunzip_init(struct bnx2x *bp) +{ + bp->gunzip_buf = dma_alloc_coherent(&bp->pdev->dev, FW_BUF_SIZE, + &bp->gunzip_mapping, GFP_KERNEL); + if (bp->gunzip_buf == NULL) + goto gunzip_nomem1; + + bp->strm = kmalloc(sizeof(*bp->strm), GFP_KERNEL); + if (bp->strm == NULL) + goto gunzip_nomem2; + + bp->strm->workspace = vmalloc(zlib_inflate_workspacesize()); + if (bp->strm->workspace == NULL) + goto gunzip_nomem3; + + return 0; + +gunzip_nomem3: + kfree(bp->strm); + bp->strm = NULL; + +gunzip_nomem2: + dma_free_coherent(&bp->pdev->dev, FW_BUF_SIZE, bp->gunzip_buf, + bp->gunzip_mapping); + bp->gunzip_buf = NULL; + +gunzip_nomem1: + netdev_err(bp->dev, "Cannot allocate firmware buffer for" + " un-compression\n"); + return -ENOMEM; +} + +static void bnx2x_gunzip_end(struct bnx2x *bp) +{ + if (bp->strm) { + vfree(bp->strm->workspace); + kfree(bp->strm); + bp->strm = NULL; + } + + if (bp->gunzip_buf) { + dma_free_coherent(&bp->pdev->dev, FW_BUF_SIZE, bp->gunzip_buf, + bp->gunzip_mapping); + bp->gunzip_buf = NULL; + } +} + +static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len) +{ + int n, rc; + + /* check gzip header */ + if ((zbuf[0] != 0x1f) || (zbuf[1] != 0x8b) || (zbuf[2] != Z_DEFLATED)) { + BNX2X_ERR("Bad gzip header\n"); + return -EINVAL; + } + + n = 10; + +#define FNAME 0x8 + + if (zbuf[3] & FNAME) + while ((zbuf[n++] != 0) && (n < len)); + + bp->strm->next_in = (typeof(bp->strm->next_in))zbuf + n; + bp->strm->avail_in = len - n; + bp->strm->next_out = bp->gunzip_buf; + bp->strm->avail_out = FW_BUF_SIZE; + + rc = zlib_inflateInit2(bp->strm, -MAX_WBITS); + if (rc != Z_OK) + return rc; + + rc = zlib_inflate(bp->strm, Z_FINISH); + if ((rc != Z_OK) && (rc != Z_STREAM_END)) + netdev_err(bp->dev, "Firmware decompression error: %s\n", + bp->strm->msg); + + bp->gunzip_outlen = (FW_BUF_SIZE - bp->strm->avail_out); + if (bp->gunzip_outlen & 0x3) + netdev_err(bp->dev, "Firmware decompression error:" + " gunzip_outlen (%d) not aligned\n", + bp->gunzip_outlen); + bp->gunzip_outlen >>= 2; + + zlib_inflateEnd(bp->strm); + + if (rc == Z_STREAM_END) + return 0; + + return rc; +} + +/* nic load/unload */ + +/* + * General service functions + */ + +/* send a NIG loopback debug packet */ +static void bnx2x_lb_pckt(struct bnx2x *bp) +{ + u32 wb_write[3]; + + /* Ethernet source and destination addresses */ + wb_write[0] = 0x55555555; + wb_write[1] = 0x55555555; + wb_write[2] = 0x20; /* SOP */ + REG_WR_DMAE(bp, NIG_REG_DEBUG_PACKET_LB, wb_write, 3); + + /* NON-IP protocol */ + wb_write[0] = 0x09000000; + wb_write[1] = 0x55555555; + wb_write[2] = 0x10; /* EOP, eop_bvalid = 0 */ + REG_WR_DMAE(bp, NIG_REG_DEBUG_PACKET_LB, wb_write, 3); +} + +/* some of the internal memories + * are not directly readable from the driver + * to test them we send debug packets + */ +static int bnx2x_int_mem_test(struct bnx2x *bp) +{ + int factor; + int count, i; + u32 val = 0; + + if (CHIP_REV_IS_FPGA(bp)) + factor = 120; + else if (CHIP_REV_IS_EMUL(bp)) + factor = 200; + else + factor = 1; + + /* Disable inputs of parser neighbor blocks */ + REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0); + REG_WR(bp, TCM_REG_PRS_IFEN, 0x0); + REG_WR(bp, CFC_REG_DEBUG0, 0x1); + REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0); + + /* Write 0 to parser credits for CFC search request */ + REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0); + + /* send Ethernet packet */ + bnx2x_lb_pckt(bp); + + /* TODO do i reset NIG statistic? */ + /* Wait until NIG register shows 1 packet of size 0x10 */ + count = 1000 * factor; + while (count) { + + bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2); + val = *bnx2x_sp(bp, wb_data[0]); + if (val == 0x10) + break; + + msleep(10); + count--; + } + if (val != 0x10) { + BNX2X_ERR("NIG timeout val = 0x%x\n", val); + return -1; + } + + /* Wait until PRS register shows 1 packet */ + count = 1000 * factor; + while (count) { + val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS); + if (val == 1) + break; + + msleep(10); + count--; + } + if (val != 0x1) { + BNX2X_ERR("PRS timeout val = 0x%x\n", val); + return -2; + } + + /* Reset and init BRB, PRS */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x03); + msleep(50); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03); + msleep(50); + bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON); + + DP(NETIF_MSG_HW, "part2\n"); + + /* Disable inputs of parser neighbor blocks */ + REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0); + REG_WR(bp, TCM_REG_PRS_IFEN, 0x0); + REG_WR(bp, CFC_REG_DEBUG0, 0x1); + REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0); + + /* Write 0 to parser credits for CFC search request */ + REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0); + + /* send 10 Ethernet packets */ + for (i = 0; i < 10; i++) + bnx2x_lb_pckt(bp); + + /* Wait until NIG register shows 10 + 1 + packets of size 11*0x10 = 0xb0 */ + count = 1000 * factor; + while (count) { + + bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2); + val = *bnx2x_sp(bp, wb_data[0]); + if (val == 0xb0) + break; + + msleep(10); + count--; + } + if (val != 0xb0) { + BNX2X_ERR("NIG timeout val = 0x%x\n", val); + return -3; + } + + /* Wait until PRS register shows 2 packets */ + val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS); + if (val != 2) + BNX2X_ERR("PRS timeout val = 0x%x\n", val); + + /* Write 1 to parser credits for CFC search request */ + REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x1); + + /* Wait until PRS register shows 3 packets */ + msleep(10 * factor); + /* Wait until NIG register shows 1 packet of size 0x10 */ + val = REG_RD(bp, PRS_REG_NUM_OF_PACKETS); + if (val != 3) + BNX2X_ERR("PRS timeout val = 0x%x\n", val); + + /* clear NIG EOP FIFO */ + for (i = 0; i < 11; i++) + REG_RD(bp, NIG_REG_INGRESS_EOP_LB_FIFO); + val = REG_RD(bp, NIG_REG_INGRESS_EOP_LB_EMPTY); + if (val != 1) { + BNX2X_ERR("clear of NIG failed\n"); + return -4; + } + + /* Reset and init BRB, PRS, NIG */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x03); + msleep(50); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03); + msleep(50); + bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON); +#ifndef BCM_CNIC + /* set NIC mode */ + REG_WR(bp, PRS_REG_NIC_MODE, 1); +#endif + + /* Enable inputs of parser neighbor blocks */ + REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x7fffffff); + REG_WR(bp, TCM_REG_PRS_IFEN, 0x1); + REG_WR(bp, CFC_REG_DEBUG0, 0x0); + REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x1); + + DP(NETIF_MSG_HW, "done\n"); + + return 0; /* OK */ +} + +static void bnx2x_enable_blocks_attention(struct bnx2x *bp) +{ + REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0); + if (!CHIP_IS_E1x(bp)) + REG_WR(bp, PXP_REG_PXP_INT_MASK_1, 0x40); + else + REG_WR(bp, PXP_REG_PXP_INT_MASK_1, 0); + REG_WR(bp, DORQ_REG_DORQ_INT_MASK, 0); + REG_WR(bp, CFC_REG_CFC_INT_MASK, 0); + /* + * mask read length error interrupts in brb for parser + * (parsing unit and 'checksum and crc' unit) + * these errors are legal (PU reads fixed length and CAC can cause + * read length error on truncated packets) + */ + REG_WR(bp, BRB1_REG_BRB1_INT_MASK, 0xFC00); + REG_WR(bp, QM_REG_QM_INT_MASK, 0); + REG_WR(bp, TM_REG_TM_INT_MASK, 0); + REG_WR(bp, XSDM_REG_XSDM_INT_MASK_0, 0); + REG_WR(bp, XSDM_REG_XSDM_INT_MASK_1, 0); + REG_WR(bp, XCM_REG_XCM_INT_MASK, 0); +/* REG_WR(bp, XSEM_REG_XSEM_INT_MASK_0, 0); */ +/* REG_WR(bp, XSEM_REG_XSEM_INT_MASK_1, 0); */ + REG_WR(bp, USDM_REG_USDM_INT_MASK_0, 0); + REG_WR(bp, USDM_REG_USDM_INT_MASK_1, 0); + REG_WR(bp, UCM_REG_UCM_INT_MASK, 0); +/* REG_WR(bp, USEM_REG_USEM_INT_MASK_0, 0); */ +/* REG_WR(bp, USEM_REG_USEM_INT_MASK_1, 0); */ + REG_WR(bp, GRCBASE_UPB + PB_REG_PB_INT_MASK, 0); + REG_WR(bp, CSDM_REG_CSDM_INT_MASK_0, 0); + REG_WR(bp, CSDM_REG_CSDM_INT_MASK_1, 0); + REG_WR(bp, CCM_REG_CCM_INT_MASK, 0); +/* REG_WR(bp, CSEM_REG_CSEM_INT_MASK_0, 0); */ +/* REG_WR(bp, CSEM_REG_CSEM_INT_MASK_1, 0); */ + + if (CHIP_REV_IS_FPGA(bp)) + REG_WR(bp, PXP2_REG_PXP2_INT_MASK_0, 0x580000); + else if (!CHIP_IS_E1x(bp)) + REG_WR(bp, PXP2_REG_PXP2_INT_MASK_0, + (PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF + | PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT + | PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN + | PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED + | PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED)); + else + REG_WR(bp, PXP2_REG_PXP2_INT_MASK_0, 0x480000); + REG_WR(bp, TSDM_REG_TSDM_INT_MASK_0, 0); + REG_WR(bp, TSDM_REG_TSDM_INT_MASK_1, 0); + REG_WR(bp, TCM_REG_TCM_INT_MASK, 0); +/* REG_WR(bp, TSEM_REG_TSEM_INT_MASK_0, 0); */ + + if (!CHIP_IS_E1x(bp)) + /* enable VFC attentions: bits 11 and 12, bits 31:13 reserved */ + REG_WR(bp, TSEM_REG_TSEM_INT_MASK_1, 0x07ff); + + REG_WR(bp, CDU_REG_CDU_INT_MASK, 0); + REG_WR(bp, DMAE_REG_DMAE_INT_MASK, 0); +/* REG_WR(bp, MISC_REG_MISC_INT_MASK, 0); */ + REG_WR(bp, PBF_REG_PBF_INT_MASK, 0x18); /* bit 3,4 masked */ +} + +static void bnx2x_reset_common(struct bnx2x *bp) +{ + u32 val = 0x1400; + + /* reset_common */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, + 0xd3ffff7f); + + if (CHIP_IS_E3(bp)) { + val |= MISC_REGISTERS_RESET_REG_2_MSTAT0; + val |= MISC_REGISTERS_RESET_REG_2_MSTAT1; + } + + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, val); +} + +static void bnx2x_setup_dmae(struct bnx2x *bp) +{ + bp->dmae_ready = 0; + spin_lock_init(&bp->dmae_lock); +} + +static void bnx2x_init_pxp(struct bnx2x *bp) +{ + u16 devctl; + int r_order, w_order; + + pci_read_config_word(bp->pdev, + pci_pcie_cap(bp->pdev) + PCI_EXP_DEVCTL, &devctl); + DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl); + w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5); + if (bp->mrrs == -1) + r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12); + else { + DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs); + r_order = bp->mrrs; + } + + bnx2x_init_pxp_arb(bp, r_order, w_order); +} + +static void bnx2x_setup_fan_failure_detection(struct bnx2x *bp) +{ + int is_required; + u32 val; + int port; + + if (BP_NOMCP(bp)) + return; + + is_required = 0; + val = SHMEM_RD(bp, dev_info.shared_hw_config.config2) & + SHARED_HW_CFG_FAN_FAILURE_MASK; + + if (val == SHARED_HW_CFG_FAN_FAILURE_ENABLED) + is_required = 1; + + /* + * The fan failure mechanism is usually related to the PHY type since + * the power consumption of the board is affected by the PHY. Currently, + * fan is required for most designs with SFX7101, BCM8727 and BCM8481. + */ + else if (val == SHARED_HW_CFG_FAN_FAILURE_PHY_TYPE) + for (port = PORT_0; port < PORT_MAX; port++) { + is_required |= + bnx2x_fan_failure_det_req( + bp, + bp->common.shmem_base, + bp->common.shmem2_base, + port); + } + + DP(NETIF_MSG_HW, "fan detection setting: %d\n", is_required); + + if (is_required == 0) + return; + + /* Fan failure is indicated by SPIO 5 */ + bnx2x_set_spio(bp, MISC_REGISTERS_SPIO_5, + MISC_REGISTERS_SPIO_INPUT_HI_Z); + + /* set to active low mode */ + val = REG_RD(bp, MISC_REG_SPIO_INT); + val |= ((1 << MISC_REGISTERS_SPIO_5) << + MISC_REGISTERS_SPIO_INT_OLD_SET_POS); + REG_WR(bp, MISC_REG_SPIO_INT, val); + + /* enable interrupt to signal the IGU */ + val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN); + val |= (1 << MISC_REGISTERS_SPIO_5); + REG_WR(bp, MISC_REG_SPIO_EVENT_EN, val); +} + +static void bnx2x_pretend_func(struct bnx2x *bp, u8 pretend_func_num) +{ + u32 offset = 0; + + if (CHIP_IS_E1(bp)) + return; + if (CHIP_IS_E1H(bp) && (pretend_func_num >= E1H_FUNC_MAX)) + return; + + switch (BP_ABS_FUNC(bp)) { + case 0: + offset = PXP2_REG_PGL_PRETEND_FUNC_F0; + break; + case 1: + offset = PXP2_REG_PGL_PRETEND_FUNC_F1; + break; + case 2: + offset = PXP2_REG_PGL_PRETEND_FUNC_F2; + break; + case 3: + offset = PXP2_REG_PGL_PRETEND_FUNC_F3; + break; + case 4: + offset = PXP2_REG_PGL_PRETEND_FUNC_F4; + break; + case 5: + offset = PXP2_REG_PGL_PRETEND_FUNC_F5; + break; + case 6: + offset = PXP2_REG_PGL_PRETEND_FUNC_F6; + break; + case 7: + offset = PXP2_REG_PGL_PRETEND_FUNC_F7; + break; + default: + return; + } + + REG_WR(bp, offset, pretend_func_num); + REG_RD(bp, offset); + DP(NETIF_MSG_HW, "Pretending to func %d\n", pretend_func_num); +} + +void bnx2x_pf_disable(struct bnx2x *bp) +{ + u32 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION); + val &= ~IGU_PF_CONF_FUNC_EN; + + REG_WR(bp, IGU_REG_PF_CONFIGURATION, val); + REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0); + REG_WR(bp, CFC_REG_WEAK_ENABLE_PF, 0); +} + +static inline void bnx2x__common_init_phy(struct bnx2x *bp) +{ + u32 shmem_base[2], shmem2_base[2]; + shmem_base[0] = bp->common.shmem_base; + shmem2_base[0] = bp->common.shmem2_base; + if (!CHIP_IS_E1x(bp)) { + shmem_base[1] = + SHMEM2_RD(bp, other_shmem_base_addr); + shmem2_base[1] = + SHMEM2_RD(bp, other_shmem2_base_addr); + } + bnx2x_acquire_phy_lock(bp); + bnx2x_common_init_phy(bp, shmem_base, shmem2_base, + bp->common.chip_id); + bnx2x_release_phy_lock(bp); +} + +/** + * bnx2x_init_hw_common - initialize the HW at the COMMON phase. + * + * @bp: driver handle + */ +static int bnx2x_init_hw_common(struct bnx2x *bp) +{ + u32 val; + + DP(BNX2X_MSG_MCP, "starting common init func %d\n", BP_ABS_FUNC(bp)); + + /* + * take the UNDI lock to protect undi_unload flow from accessing + * registers while we're resetting the chip + */ + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET); + + bnx2x_reset_common(bp); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff); + + val = 0xfffc; + if (CHIP_IS_E3(bp)) { + val |= MISC_REGISTERS_RESET_REG_2_MSTAT0; + val |= MISC_REGISTERS_RESET_REG_2_MSTAT1; + } + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, val); + + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET); + + bnx2x_init_block(bp, BLOCK_MISC, PHASE_COMMON); + + if (!CHIP_IS_E1x(bp)) { + u8 abs_func_id; + + /** + * 4-port mode or 2-port mode we need to turn of master-enable + * for everyone, after that, turn it back on for self. + * so, we disregard multi-function or not, and always disable + * for all functions on the given path, this means 0,2,4,6 for + * path 0 and 1,3,5,7 for path 1 + */ + for (abs_func_id = BP_PATH(bp); + abs_func_id < E2_FUNC_MAX*2; abs_func_id += 2) { + if (abs_func_id == BP_ABS_FUNC(bp)) { + REG_WR(bp, + PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, + 1); + continue; + } + + bnx2x_pretend_func(bp, abs_func_id); + /* clear pf enable */ + bnx2x_pf_disable(bp); + bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); + } + } + + bnx2x_init_block(bp, BLOCK_PXP, PHASE_COMMON); + if (CHIP_IS_E1(bp)) { + /* enable HW interrupt from PXP on USDM overflow + bit 16 on INT_MASK_0 */ + REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0); + } + + bnx2x_init_block(bp, BLOCK_PXP2, PHASE_COMMON); + bnx2x_init_pxp(bp); + +#ifdef __BIG_ENDIAN + REG_WR(bp, PXP2_REG_RQ_QM_ENDIAN_M, 1); + REG_WR(bp, PXP2_REG_RQ_TM_ENDIAN_M, 1); + REG_WR(bp, PXP2_REG_RQ_SRC_ENDIAN_M, 1); + REG_WR(bp, PXP2_REG_RQ_CDU_ENDIAN_M, 1); + REG_WR(bp, PXP2_REG_RQ_DBG_ENDIAN_M, 1); + /* make sure this value is 0 */ + REG_WR(bp, PXP2_REG_RQ_HC_ENDIAN_M, 0); + +/* REG_WR(bp, PXP2_REG_RD_PBF_SWAP_MODE, 1); */ + REG_WR(bp, PXP2_REG_RD_QM_SWAP_MODE, 1); + REG_WR(bp, PXP2_REG_RD_TM_SWAP_MODE, 1); + REG_WR(bp, PXP2_REG_RD_SRC_SWAP_MODE, 1); + REG_WR(bp, PXP2_REG_RD_CDURD_SWAP_MODE, 1); +#endif + + bnx2x_ilt_init_page_size(bp, INITOP_SET); + + if (CHIP_REV_IS_FPGA(bp) && CHIP_IS_E1H(bp)) + REG_WR(bp, PXP2_REG_PGL_TAGS_LIMIT, 0x1); + + /* let the HW do it's magic ... */ + msleep(100); + /* finish PXP init */ + val = REG_RD(bp, PXP2_REG_RQ_CFG_DONE); + if (val != 1) { + BNX2X_ERR("PXP2 CFG failed\n"); + return -EBUSY; + } + val = REG_RD(bp, PXP2_REG_RD_INIT_DONE); + if (val != 1) { + BNX2X_ERR("PXP2 RD_INIT failed\n"); + return -EBUSY; + } + + /* Timers bug workaround E2 only. We need to set the entire ILT to + * have entries with value "0" and valid bit on. + * This needs to be done by the first PF that is loaded in a path + * (i.e. common phase) + */ + if (!CHIP_IS_E1x(bp)) { +/* In E2 there is a bug in the timers block that can cause function 6 / 7 + * (i.e. vnic3) to start even if it is marked as "scan-off". + * This occurs when a different function (func2,3) is being marked + * as "scan-off". Real-life scenario for example: if a driver is being + * load-unloaded while func6,7 are down. This will cause the timer to access + * the ilt, translate to a logical address and send a request to read/write. + * Since the ilt for the function that is down is not valid, this will cause + * a translation error which is unrecoverable. + * The Workaround is intended to make sure that when this happens nothing fatal + * will occur. The workaround: + * 1. First PF driver which loads on a path will: + * a. After taking the chip out of reset, by using pretend, + * it will write "0" to the following registers of + * the other vnics. + * REG_WR(pdev, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0); + * REG_WR(pdev, CFC_REG_WEAK_ENABLE_PF,0); + * REG_WR(pdev, CFC_REG_STRONG_ENABLE_PF,0); + * And for itself it will write '1' to + * PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER to enable + * dmae-operations (writing to pram for example.) + * note: can be done for only function 6,7 but cleaner this + * way. + * b. Write zero+valid to the entire ILT. + * c. Init the first_timers_ilt_entry, last_timers_ilt_entry of + * VNIC3 (of that port). The range allocated will be the + * entire ILT. This is needed to prevent ILT range error. + * 2. Any PF driver load flow: + * a. ILT update with the physical addresses of the allocated + * logical pages. + * b. Wait 20msec. - note that this timeout is needed to make + * sure there are no requests in one of the PXP internal + * queues with "old" ILT addresses. + * c. PF enable in the PGLC. + * d. Clear the was_error of the PF in the PGLC. (could have + * occured while driver was down) + * e. PF enable in the CFC (WEAK + STRONG) + * f. Timers scan enable + * 3. PF driver unload flow: + * a. Clear the Timers scan_en. + * b. Polling for scan_on=0 for that PF. + * c. Clear the PF enable bit in the PXP. + * d. Clear the PF enable in the CFC (WEAK + STRONG) + * e. Write zero+valid to all ILT entries (The valid bit must + * stay set) + * f. If this is VNIC 3 of a port then also init + * first_timers_ilt_entry to zero and last_timers_ilt_entry + * to the last enrty in the ILT. + * + * Notes: + * Currently the PF error in the PGLC is non recoverable. + * In the future the there will be a recovery routine for this error. + * Currently attention is masked. + * Having an MCP lock on the load/unload process does not guarantee that + * there is no Timer disable during Func6/7 enable. This is because the + * Timers scan is currently being cleared by the MCP on FLR. + * Step 2.d can be done only for PF6/7 and the driver can also check if + * there is error before clearing it. But the flow above is simpler and + * more general. + * All ILT entries are written by zero+valid and not just PF6/7 + * ILT entries since in the future the ILT entries allocation for + * PF-s might be dynamic. + */ + struct ilt_client_info ilt_cli; + struct bnx2x_ilt ilt; + memset(&ilt_cli, 0, sizeof(struct ilt_client_info)); + memset(&ilt, 0, sizeof(struct bnx2x_ilt)); + + /* initialize dummy TM client */ + ilt_cli.start = 0; + ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1; + ilt_cli.client_num = ILT_CLIENT_TM; + + /* Step 1: set zeroes to all ilt page entries with valid bit on + * Step 2: set the timers first/last ilt entry to point + * to the entire range to prevent ILT range error for 3rd/4th + * vnic (this code assumes existance of the vnic) + * + * both steps performed by call to bnx2x_ilt_client_init_op() + * with dummy TM client + * + * we must use pretend since PXP2_REG_RQ_##blk##_FIRST_ILT + * and his brother are split registers + */ + bnx2x_pretend_func(bp, (BP_PATH(bp) + 6)); + bnx2x_ilt_client_init_op_ilt(bp, &ilt, &ilt_cli, INITOP_CLEAR); + bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); + + REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN, BNX2X_PXP_DRAM_ALIGN); + REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN_RD, BNX2X_PXP_DRAM_ALIGN); + REG_WR(bp, PXP2_REG_RQ_DRAM_ALIGN_SEL, 1); + } + + + REG_WR(bp, PXP2_REG_RQ_DISABLE_INPUTS, 0); + REG_WR(bp, PXP2_REG_RD_DISABLE_INPUTS, 0); + + if (!CHIP_IS_E1x(bp)) { + int factor = CHIP_REV_IS_EMUL(bp) ? 1000 : + (CHIP_REV_IS_FPGA(bp) ? 400 : 0); + bnx2x_init_block(bp, BLOCK_PGLUE_B, PHASE_COMMON); + + bnx2x_init_block(bp, BLOCK_ATC, PHASE_COMMON); + + /* let the HW do it's magic ... */ + do { + msleep(200); + val = REG_RD(bp, ATC_REG_ATC_INIT_DONE); + } while (factor-- && (val != 1)); + + if (val != 1) { + BNX2X_ERR("ATC_INIT failed\n"); + return -EBUSY; + } + } + + bnx2x_init_block(bp, BLOCK_DMAE, PHASE_COMMON); + + /* clean the DMAE memory */ + bp->dmae_ready = 1; + bnx2x_init_fill(bp, TSEM_REG_PRAM, 0, 8, 1); + + bnx2x_init_block(bp, BLOCK_TCM, PHASE_COMMON); + + bnx2x_init_block(bp, BLOCK_UCM, PHASE_COMMON); + + bnx2x_init_block(bp, BLOCK_CCM, PHASE_COMMON); + + bnx2x_init_block(bp, BLOCK_XCM, PHASE_COMMON); + + bnx2x_read_dmae(bp, XSEM_REG_PASSIVE_BUFFER, 3); + bnx2x_read_dmae(bp, CSEM_REG_PASSIVE_BUFFER, 3); + bnx2x_read_dmae(bp, TSEM_REG_PASSIVE_BUFFER, 3); + bnx2x_read_dmae(bp, USEM_REG_PASSIVE_BUFFER, 3); + + bnx2x_init_block(bp, BLOCK_QM, PHASE_COMMON); + + + /* QM queues pointers table */ + bnx2x_qm_init_ptr_table(bp, bp->qm_cid_count, INITOP_SET); + + /* soft reset pulse */ + REG_WR(bp, QM_REG_SOFT_RESET, 1); + REG_WR(bp, QM_REG_SOFT_RESET, 0); + +#ifdef BCM_CNIC + bnx2x_init_block(bp, BLOCK_TM, PHASE_COMMON); +#endif + + bnx2x_init_block(bp, BLOCK_DORQ, PHASE_COMMON); + REG_WR(bp, DORQ_REG_DPM_CID_OFST, BNX2X_DB_SHIFT); + if (!CHIP_REV_IS_SLOW(bp)) + /* enable hw interrupt from doorbell Q */ + REG_WR(bp, DORQ_REG_DORQ_INT_MASK, 0); + + bnx2x_init_block(bp, BLOCK_BRB1, PHASE_COMMON); + + bnx2x_init_block(bp, BLOCK_PRS, PHASE_COMMON); + REG_WR(bp, PRS_REG_A_PRSU_20, 0xf); + + if (!CHIP_IS_E1(bp)) + REG_WR(bp, PRS_REG_E1HOV_MODE, bp->path_has_ovlan); + + if (!CHIP_IS_E1x(bp) && !CHIP_IS_E3B0(bp)) + /* Bit-map indicating which L2 hdrs may appear + * after the basic Ethernet header + */ + REG_WR(bp, PRS_REG_HDRS_AFTER_BASIC, + bp->path_has_ovlan ? 7 : 6); + + bnx2x_init_block(bp, BLOCK_TSDM, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_CSDM, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_USDM, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_XSDM, PHASE_COMMON); + + if (!CHIP_IS_E1x(bp)) { + /* reset VFC memories */ + REG_WR(bp, TSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST, + VFC_MEMORIES_RST_REG_CAM_RST | + VFC_MEMORIES_RST_REG_RAM_RST); + REG_WR(bp, XSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST, + VFC_MEMORIES_RST_REG_CAM_RST | + VFC_MEMORIES_RST_REG_RAM_RST); + + msleep(20); + } + + bnx2x_init_block(bp, BLOCK_TSEM, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_USEM, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_CSEM, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_XSEM, PHASE_COMMON); + + /* sync semi rtc */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, + 0x80000000); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, + 0x80000000); + + bnx2x_init_block(bp, BLOCK_UPB, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_XPB, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_PBF, PHASE_COMMON); + + if (!CHIP_IS_E1x(bp)) + REG_WR(bp, PBF_REG_HDRS_AFTER_BASIC, + bp->path_has_ovlan ? 7 : 6); + + REG_WR(bp, SRC_REG_SOFT_RST, 1); + + bnx2x_init_block(bp, BLOCK_SRC, PHASE_COMMON); + +#ifdef BCM_CNIC + REG_WR(bp, SRC_REG_KEYSEARCH_0, 0x63285672); + REG_WR(bp, SRC_REG_KEYSEARCH_1, 0x24b8f2cc); + REG_WR(bp, SRC_REG_KEYSEARCH_2, 0x223aef9b); + REG_WR(bp, SRC_REG_KEYSEARCH_3, 0x26001e3a); + REG_WR(bp, SRC_REG_KEYSEARCH_4, 0x7ae91116); + REG_WR(bp, SRC_REG_KEYSEARCH_5, 0x5ce5230b); + REG_WR(bp, SRC_REG_KEYSEARCH_6, 0x298d8adf); + REG_WR(bp, SRC_REG_KEYSEARCH_7, 0x6eb0ff09); + REG_WR(bp, SRC_REG_KEYSEARCH_8, 0x1830f82f); + REG_WR(bp, SRC_REG_KEYSEARCH_9, 0x01e46be7); +#endif + REG_WR(bp, SRC_REG_SOFT_RST, 0); + + if (sizeof(union cdu_context) != 1024) + /* we currently assume that a context is 1024 bytes */ + dev_alert(&bp->pdev->dev, "please adjust the size " + "of cdu_context(%ld)\n", + (long)sizeof(union cdu_context)); + + bnx2x_init_block(bp, BLOCK_CDU, PHASE_COMMON); + val = (4 << 24) + (0 << 12) + 1024; + REG_WR(bp, CDU_REG_CDU_GLOBAL_PARAMS, val); + + bnx2x_init_block(bp, BLOCK_CFC, PHASE_COMMON); + REG_WR(bp, CFC_REG_INIT_REG, 0x7FF); + /* enable context validation interrupt from CFC */ + REG_WR(bp, CFC_REG_CFC_INT_MASK, 0); + + /* set the thresholds to prevent CFC/CDU race */ + REG_WR(bp, CFC_REG_DEBUG0, 0x20020000); + + bnx2x_init_block(bp, BLOCK_HC, PHASE_COMMON); + + if (!CHIP_IS_E1x(bp) && BP_NOMCP(bp)) + REG_WR(bp, IGU_REG_RESET_MEMORIES, 0x36); + + bnx2x_init_block(bp, BLOCK_IGU, PHASE_COMMON); + bnx2x_init_block(bp, BLOCK_MISC_AEU, PHASE_COMMON); + + /* Reset PCIE errors for debug */ + REG_WR(bp, 0x2814, 0xffffffff); + REG_WR(bp, 0x3820, 0xffffffff); + + if (!CHIP_IS_E1x(bp)) { + REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_CONTROL_5, + (PXPCS_TL_CONTROL_5_ERR_UNSPPORT1 | + PXPCS_TL_CONTROL_5_ERR_UNSPPORT)); + REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_FUNC345_STAT, + (PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT4 | + PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT3 | + PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT2)); + REG_WR(bp, PCICFG_OFFSET + PXPCS_TL_FUNC678_STAT, + (PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT7 | + PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT6 | + PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT5)); + } + + bnx2x_init_block(bp, BLOCK_NIG, PHASE_COMMON); + if (!CHIP_IS_E1(bp)) { + /* in E3 this done in per-port section */ + if (!CHIP_IS_E3(bp)) + REG_WR(bp, NIG_REG_LLH_MF_MODE, IS_MF(bp)); + } + if (CHIP_IS_E1H(bp)) + /* not applicable for E2 (and above ...) */ + REG_WR(bp, NIG_REG_LLH_E1HOV_MODE, IS_MF_SD(bp)); + + if (CHIP_REV_IS_SLOW(bp)) + msleep(200); + + /* finish CFC init */ + val = reg_poll(bp, CFC_REG_LL_INIT_DONE, 1, 100, 10); + if (val != 1) { + BNX2X_ERR("CFC LL_INIT failed\n"); + return -EBUSY; + } + val = reg_poll(bp, CFC_REG_AC_INIT_DONE, 1, 100, 10); + if (val != 1) { + BNX2X_ERR("CFC AC_INIT failed\n"); + return -EBUSY; + } + val = reg_poll(bp, CFC_REG_CAM_INIT_DONE, 1, 100, 10); + if (val != 1) { + BNX2X_ERR("CFC CAM_INIT failed\n"); + return -EBUSY; + } + REG_WR(bp, CFC_REG_DEBUG0, 0); + + if (CHIP_IS_E1(bp)) { + /* read NIG statistic + to see if this is our first up since powerup */ + bnx2x_read_dmae(bp, NIG_REG_STAT2_BRB_OCTET, 2); + val = *bnx2x_sp(bp, wb_data[0]); + + /* do internal memory self test */ + if ((val == 0) && bnx2x_int_mem_test(bp)) { + BNX2X_ERR("internal mem self test failed\n"); + return -EBUSY; + } + } + + bnx2x_setup_fan_failure_detection(bp); + + /* clear PXP2 attentions */ + REG_RD(bp, PXP2_REG_PXP2_INT_STS_CLR_0); + + bnx2x_enable_blocks_attention(bp); + bnx2x_enable_blocks_parity(bp); + + if (!BP_NOMCP(bp)) { + if (CHIP_IS_E1x(bp)) + bnx2x__common_init_phy(bp); + } else + BNX2X_ERR("Bootcode is missing - can not initialize link\n"); + + return 0; +} + +/** + * bnx2x_init_hw_common_chip - init HW at the COMMON_CHIP phase. + * + * @bp: driver handle + */ +static int bnx2x_init_hw_common_chip(struct bnx2x *bp) +{ + int rc = bnx2x_init_hw_common(bp); + + if (rc) + return rc; + + /* In E2 2-PORT mode, same ext phy is used for the two paths */ + if (!BP_NOMCP(bp)) + bnx2x__common_init_phy(bp); + + return 0; +} + +static int bnx2x_init_hw_port(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + int init_phase = port ? PHASE_PORT1 : PHASE_PORT0; + u32 low, high; + u32 val; + + bnx2x__link_reset(bp); + + DP(BNX2X_MSG_MCP, "starting port init port %d\n", port); + + REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0); + + bnx2x_init_block(bp, BLOCK_MISC, init_phase); + bnx2x_init_block(bp, BLOCK_PXP, init_phase); + bnx2x_init_block(bp, BLOCK_PXP2, init_phase); + + /* Timers bug workaround: disables the pf_master bit in pglue at + * common phase, we need to enable it here before any dmae access are + * attempted. Therefore we manually added the enable-master to the + * port phase (it also happens in the function phase) + */ + if (!CHIP_IS_E1x(bp)) + REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1); + + bnx2x_init_block(bp, BLOCK_ATC, init_phase); + bnx2x_init_block(bp, BLOCK_DMAE, init_phase); + bnx2x_init_block(bp, BLOCK_PGLUE_B, init_phase); + bnx2x_init_block(bp, BLOCK_QM, init_phase); + + bnx2x_init_block(bp, BLOCK_TCM, init_phase); + bnx2x_init_block(bp, BLOCK_UCM, init_phase); + bnx2x_init_block(bp, BLOCK_CCM, init_phase); + bnx2x_init_block(bp, BLOCK_XCM, init_phase); + + /* QM cid (connection) count */ + bnx2x_qm_init_cid_count(bp, bp->qm_cid_count, INITOP_SET); + +#ifdef BCM_CNIC + bnx2x_init_block(bp, BLOCK_TM, init_phase); + REG_WR(bp, TM_REG_LIN0_SCAN_TIME + port*4, 20); + REG_WR(bp, TM_REG_LIN0_MAX_ACTIVE_CID + port*4, 31); +#endif + + bnx2x_init_block(bp, BLOCK_DORQ, init_phase); + + if (CHIP_IS_E1(bp) || CHIP_IS_E1H(bp)) { + bnx2x_init_block(bp, BLOCK_BRB1, init_phase); + + if (IS_MF(bp)) + low = ((bp->flags & ONE_PORT_FLAG) ? 160 : 246); + else if (bp->dev->mtu > 4096) { + if (bp->flags & ONE_PORT_FLAG) + low = 160; + else { + val = bp->dev->mtu; + /* (24*1024 + val*4)/256 */ + low = 96 + (val/64) + + ((val % 64) ? 1 : 0); + } + } else + low = ((bp->flags & ONE_PORT_FLAG) ? 80 : 160); + high = low + 56; /* 14*1024/256 */ + REG_WR(bp, BRB1_REG_PAUSE_LOW_THRESHOLD_0 + port*4, low); + REG_WR(bp, BRB1_REG_PAUSE_HIGH_THRESHOLD_0 + port*4, high); + } + + if (CHIP_MODE_IS_4_PORT(bp)) + REG_WR(bp, (BP_PORT(bp) ? + BRB1_REG_MAC_GUARANTIED_1 : + BRB1_REG_MAC_GUARANTIED_0), 40); + + + bnx2x_init_block(bp, BLOCK_PRS, init_phase); + if (CHIP_IS_E3B0(bp)) + /* Ovlan exists only if we are in multi-function + + * switch-dependent mode, in switch-independent there + * is no ovlan headers + */ + REG_WR(bp, BP_PORT(bp) ? + PRS_REG_HDRS_AFTER_BASIC_PORT_1 : + PRS_REG_HDRS_AFTER_BASIC_PORT_0, + (bp->path_has_ovlan ? 7 : 6)); + + bnx2x_init_block(bp, BLOCK_TSDM, init_phase); + bnx2x_init_block(bp, BLOCK_CSDM, init_phase); + bnx2x_init_block(bp, BLOCK_USDM, init_phase); + bnx2x_init_block(bp, BLOCK_XSDM, init_phase); + + bnx2x_init_block(bp, BLOCK_TSEM, init_phase); + bnx2x_init_block(bp, BLOCK_USEM, init_phase); + bnx2x_init_block(bp, BLOCK_CSEM, init_phase); + bnx2x_init_block(bp, BLOCK_XSEM, init_phase); + + bnx2x_init_block(bp, BLOCK_UPB, init_phase); + bnx2x_init_block(bp, BLOCK_XPB, init_phase); + + bnx2x_init_block(bp, BLOCK_PBF, init_phase); + + if (CHIP_IS_E1x(bp)) { + /* configure PBF to work without PAUSE mtu 9000 */ + REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0); + + /* update threshold */ + REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, (9040/16)); + /* update init credit */ + REG_WR(bp, PBF_REG_P0_INIT_CRD + port*4, (9040/16) + 553 - 22); + + /* probe changes */ + REG_WR(bp, PBF_REG_INIT_P0 + port*4, 1); + udelay(50); + REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0); + } + +#ifdef BCM_CNIC + bnx2x_init_block(bp, BLOCK_SRC, init_phase); +#endif + bnx2x_init_block(bp, BLOCK_CDU, init_phase); + bnx2x_init_block(bp, BLOCK_CFC, init_phase); + + if (CHIP_IS_E1(bp)) { + REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0); + REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0); + } + bnx2x_init_block(bp, BLOCK_HC, init_phase); + + bnx2x_init_block(bp, BLOCK_IGU, init_phase); + + bnx2x_init_block(bp, BLOCK_MISC_AEU, init_phase); + /* init aeu_mask_attn_func_0/1: + * - SF mode: bits 3-7 are masked. only bits 0-2 are in use + * - MF mode: bit 3 is masked. bits 0-2 are in use as in SF + * bits 4-7 are used for "per vn group attention" */ + val = IS_MF(bp) ? 0xF7 : 0x7; + /* Enable DCBX attention for all but E1 */ + val |= CHIP_IS_E1(bp) ? 0 : 0x10; + REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4, val); + + bnx2x_init_block(bp, BLOCK_NIG, init_phase); + + if (!CHIP_IS_E1x(bp)) { + /* Bit-map indicating which L2 hdrs may appear after the + * basic Ethernet header + */ + REG_WR(bp, BP_PORT(bp) ? + NIG_REG_P1_HDRS_AFTER_BASIC : + NIG_REG_P0_HDRS_AFTER_BASIC, + IS_MF_SD(bp) ? 7 : 6); + + if (CHIP_IS_E3(bp)) + REG_WR(bp, BP_PORT(bp) ? + NIG_REG_LLH1_MF_MODE : + NIG_REG_LLH_MF_MODE, IS_MF(bp)); + } + if (!CHIP_IS_E3(bp)) + REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 1); + + if (!CHIP_IS_E1(bp)) { + /* 0x2 disable mf_ov, 0x1 enable */ + REG_WR(bp, NIG_REG_LLH0_BRB1_DRV_MASK_MF + port*4, + (IS_MF_SD(bp) ? 0x1 : 0x2)); + + if (!CHIP_IS_E1x(bp)) { + val = 0; + switch (bp->mf_mode) { + case MULTI_FUNCTION_SD: + val = 1; + break; + case MULTI_FUNCTION_SI: + val = 2; + break; + } + + REG_WR(bp, (BP_PORT(bp) ? NIG_REG_LLH1_CLS_TYPE : + NIG_REG_LLH0_CLS_TYPE), val); + } + { + REG_WR(bp, NIG_REG_LLFC_ENABLE_0 + port*4, 0); + REG_WR(bp, NIG_REG_LLFC_OUT_EN_0 + port*4, 0); + REG_WR(bp, NIG_REG_PAUSE_ENABLE_0 + port*4, 1); + } + } + + + /* If SPIO5 is set to generate interrupts, enable it for this port */ + val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN); + if (val & (1 << MISC_REGISTERS_SPIO_5)) { + u32 reg_addr = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 : + MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); + val = REG_RD(bp, reg_addr); + val |= AEU_INPUTS_ATTN_BITS_SPIO5; + REG_WR(bp, reg_addr, val); + } + + return 0; +} + +static void bnx2x_ilt_wr(struct bnx2x *bp, u32 index, dma_addr_t addr) +{ + int reg; + + if (CHIP_IS_E1(bp)) + reg = PXP2_REG_RQ_ONCHIP_AT + index*8; + else + reg = PXP2_REG_RQ_ONCHIP_AT_B0 + index*8; + + bnx2x_wb_wr(bp, reg, ONCHIP_ADDR1(addr), ONCHIP_ADDR2(addr)); +} + +static inline void bnx2x_igu_clear_sb(struct bnx2x *bp, u8 idu_sb_id) +{ + bnx2x_igu_clear_sb_gen(bp, BP_FUNC(bp), idu_sb_id, true /*PF*/); +} + +static inline void bnx2x_clear_func_ilt(struct bnx2x *bp, u32 func) +{ + u32 i, base = FUNC_ILT_BASE(func); + for (i = base; i < base + ILT_PER_FUNC; i++) + bnx2x_ilt_wr(bp, i, 0); +} + +static int bnx2x_init_hw_func(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + int func = BP_FUNC(bp); + int init_phase = PHASE_PF0 + func; + struct bnx2x_ilt *ilt = BP_ILT(bp); + u16 cdu_ilt_start; + u32 addr, val; + u32 main_mem_base, main_mem_size, main_mem_prty_clr; + int i, main_mem_width; + + DP(BNX2X_MSG_MCP, "starting func init func %d\n", func); + + /* FLR cleanup - hmmm */ + if (!CHIP_IS_E1x(bp)) + bnx2x_pf_flr_clnup(bp); + + /* set MSI reconfigure capability */ + if (bp->common.int_block == INT_BLOCK_HC) { + addr = (port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0); + val = REG_RD(bp, addr); + val |= HC_CONFIG_0_REG_MSI_ATTN_EN_0; + REG_WR(bp, addr, val); + } + + bnx2x_init_block(bp, BLOCK_PXP, init_phase); + bnx2x_init_block(bp, BLOCK_PXP2, init_phase); + + ilt = BP_ILT(bp); + cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start; + + for (i = 0; i < L2_ILT_LINES(bp); i++) { + ilt->lines[cdu_ilt_start + i].page = + bp->context.vcxt + (ILT_PAGE_CIDS * i); + ilt->lines[cdu_ilt_start + i].page_mapping = + bp->context.cxt_mapping + (CDU_ILT_PAGE_SZ * i); + /* cdu ilt pages are allocated manually so there's no need to + set the size */ + } + bnx2x_ilt_init_op(bp, INITOP_SET); + +#ifdef BCM_CNIC + bnx2x_src_init_t2(bp, bp->t2, bp->t2_mapping, SRC_CONN_NUM); + + /* T1 hash bits value determines the T1 number of entries */ + REG_WR(bp, SRC_REG_NUMBER_HASH_BITS0 + port*4, SRC_HASH_BITS); +#endif + +#ifndef BCM_CNIC + /* set NIC mode */ + REG_WR(bp, PRS_REG_NIC_MODE, 1); +#endif /* BCM_CNIC */ + + if (!CHIP_IS_E1x(bp)) { + u32 pf_conf = IGU_PF_CONF_FUNC_EN; + + /* Turn on a single ISR mode in IGU if driver is going to use + * INT#x or MSI + */ + if (!(bp->flags & USING_MSIX_FLAG)) + pf_conf |= IGU_PF_CONF_SINGLE_ISR_EN; + /* + * Timers workaround bug: function init part. + * Need to wait 20msec after initializing ILT, + * needed to make sure there are no requests in + * one of the PXP internal queues with "old" ILT addresses + */ + msleep(20); + /* + * Master enable - Due to WB DMAE writes performed before this + * register is re-initialized as part of the regular function + * init + */ + REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1); + /* Enable the function in IGU */ + REG_WR(bp, IGU_REG_PF_CONFIGURATION, pf_conf); + } + + bp->dmae_ready = 1; + + bnx2x_init_block(bp, BLOCK_PGLUE_B, init_phase); + + if (!CHIP_IS_E1x(bp)) + REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, func); + + bnx2x_init_block(bp, BLOCK_ATC, init_phase); + bnx2x_init_block(bp, BLOCK_DMAE, init_phase); + bnx2x_init_block(bp, BLOCK_NIG, init_phase); + bnx2x_init_block(bp, BLOCK_SRC, init_phase); + bnx2x_init_block(bp, BLOCK_MISC, init_phase); + bnx2x_init_block(bp, BLOCK_TCM, init_phase); + bnx2x_init_block(bp, BLOCK_UCM, init_phase); + bnx2x_init_block(bp, BLOCK_CCM, init_phase); + bnx2x_init_block(bp, BLOCK_XCM, init_phase); + bnx2x_init_block(bp, BLOCK_TSEM, init_phase); + bnx2x_init_block(bp, BLOCK_USEM, init_phase); + bnx2x_init_block(bp, BLOCK_CSEM, init_phase); + bnx2x_init_block(bp, BLOCK_XSEM, init_phase); + + if (!CHIP_IS_E1x(bp)) + REG_WR(bp, QM_REG_PF_EN, 1); + + if (!CHIP_IS_E1x(bp)) { + REG_WR(bp, TSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func); + REG_WR(bp, USEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func); + REG_WR(bp, CSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func); + REG_WR(bp, XSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func); + } + bnx2x_init_block(bp, BLOCK_QM, init_phase); + + bnx2x_init_block(bp, BLOCK_TM, init_phase); + bnx2x_init_block(bp, BLOCK_DORQ, init_phase); + bnx2x_init_block(bp, BLOCK_BRB1, init_phase); + bnx2x_init_block(bp, BLOCK_PRS, init_phase); + bnx2x_init_block(bp, BLOCK_TSDM, init_phase); + bnx2x_init_block(bp, BLOCK_CSDM, init_phase); + bnx2x_init_block(bp, BLOCK_USDM, init_phase); + bnx2x_init_block(bp, BLOCK_XSDM, init_phase); + bnx2x_init_block(bp, BLOCK_UPB, init_phase); + bnx2x_init_block(bp, BLOCK_XPB, init_phase); + bnx2x_init_block(bp, BLOCK_PBF, init_phase); + if (!CHIP_IS_E1x(bp)) + REG_WR(bp, PBF_REG_DISABLE_PF, 0); + + bnx2x_init_block(bp, BLOCK_CDU, init_phase); + + bnx2x_init_block(bp, BLOCK_CFC, init_phase); + + if (!CHIP_IS_E1x(bp)) + REG_WR(bp, CFC_REG_WEAK_ENABLE_PF, 1); + + if (IS_MF(bp)) { + REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 1); + REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + port*8, bp->mf_ov); + } + + bnx2x_init_block(bp, BLOCK_MISC_AEU, init_phase); + + /* HC init per function */ + if (bp->common.int_block == INT_BLOCK_HC) { + if (CHIP_IS_E1H(bp)) { + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0); + + REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0); + REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0); + } + bnx2x_init_block(bp, BLOCK_HC, init_phase); + + } else { + int num_segs, sb_idx, prod_offset; + + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0); + + if (!CHIP_IS_E1x(bp)) { + REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, 0); + REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, 0); + } + + bnx2x_init_block(bp, BLOCK_IGU, init_phase); + + if (!CHIP_IS_E1x(bp)) { + int dsb_idx = 0; + /** + * Producer memory: + * E2 mode: address 0-135 match to the mapping memory; + * 136 - PF0 default prod; 137 - PF1 default prod; + * 138 - PF2 default prod; 139 - PF3 default prod; + * 140 - PF0 attn prod; 141 - PF1 attn prod; + * 142 - PF2 attn prod; 143 - PF3 attn prod; + * 144-147 reserved. + * + * E1.5 mode - In backward compatible mode; + * for non default SB; each even line in the memory + * holds the U producer and each odd line hold + * the C producer. The first 128 producers are for + * NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The last 20 + * producers are for the DSB for each PF. + * Each PF has five segments: (the order inside each + * segment is PF0; PF1; PF2; PF3) - 128-131 U prods; + * 132-135 C prods; 136-139 X prods; 140-143 T prods; + * 144-147 attn prods; + */ + /* non-default-status-blocks */ + num_segs = CHIP_INT_MODE_IS_BC(bp) ? + IGU_BC_NDSB_NUM_SEGS : IGU_NORM_NDSB_NUM_SEGS; + for (sb_idx = 0; sb_idx < bp->igu_sb_cnt; sb_idx++) { + prod_offset = (bp->igu_base_sb + sb_idx) * + num_segs; + + for (i = 0; i < num_segs; i++) { + addr = IGU_REG_PROD_CONS_MEMORY + + (prod_offset + i) * 4; + REG_WR(bp, addr, 0); + } + /* send consumer update with value 0 */ + bnx2x_ack_sb(bp, bp->igu_base_sb + sb_idx, + USTORM_ID, 0, IGU_INT_NOP, 1); + bnx2x_igu_clear_sb(bp, + bp->igu_base_sb + sb_idx); + } + + /* default-status-blocks */ + num_segs = CHIP_INT_MODE_IS_BC(bp) ? + IGU_BC_DSB_NUM_SEGS : IGU_NORM_DSB_NUM_SEGS; + + if (CHIP_MODE_IS_4_PORT(bp)) + dsb_idx = BP_FUNC(bp); + else + dsb_idx = BP_VN(bp); + + prod_offset = (CHIP_INT_MODE_IS_BC(bp) ? + IGU_BC_BASE_DSB_PROD + dsb_idx : + IGU_NORM_BASE_DSB_PROD + dsb_idx); + + /* + * igu prods come in chunks of E1HVN_MAX (4) - + * does not matters what is the current chip mode + */ + for (i = 0; i < (num_segs * E1HVN_MAX); + i += E1HVN_MAX) { + addr = IGU_REG_PROD_CONS_MEMORY + + (prod_offset + i)*4; + REG_WR(bp, addr, 0); + } + /* send consumer update with 0 */ + if (CHIP_INT_MODE_IS_BC(bp)) { + bnx2x_ack_sb(bp, bp->igu_dsb_id, + USTORM_ID, 0, IGU_INT_NOP, 1); + bnx2x_ack_sb(bp, bp->igu_dsb_id, + CSTORM_ID, 0, IGU_INT_NOP, 1); + bnx2x_ack_sb(bp, bp->igu_dsb_id, + XSTORM_ID, 0, IGU_INT_NOP, 1); + bnx2x_ack_sb(bp, bp->igu_dsb_id, + TSTORM_ID, 0, IGU_INT_NOP, 1); + bnx2x_ack_sb(bp, bp->igu_dsb_id, + ATTENTION_ID, 0, IGU_INT_NOP, 1); + } else { + bnx2x_ack_sb(bp, bp->igu_dsb_id, + USTORM_ID, 0, IGU_INT_NOP, 1); + bnx2x_ack_sb(bp, bp->igu_dsb_id, + ATTENTION_ID, 0, IGU_INT_NOP, 1); + } + bnx2x_igu_clear_sb(bp, bp->igu_dsb_id); + + /* !!! these should become driver const once + rf-tool supports split-68 const */ + REG_WR(bp, IGU_REG_SB_INT_BEFORE_MASK_LSB, 0); + REG_WR(bp, IGU_REG_SB_INT_BEFORE_MASK_MSB, 0); + REG_WR(bp, IGU_REG_SB_MASK_LSB, 0); + REG_WR(bp, IGU_REG_SB_MASK_MSB, 0); + REG_WR(bp, IGU_REG_PBA_STATUS_LSB, 0); + REG_WR(bp, IGU_REG_PBA_STATUS_MSB, 0); + } + } + + /* Reset PCIE errors for debug */ + REG_WR(bp, 0x2114, 0xffffffff); + REG_WR(bp, 0x2120, 0xffffffff); + + if (CHIP_IS_E1x(bp)) { + main_mem_size = HC_REG_MAIN_MEMORY_SIZE / 2; /*dwords*/ + main_mem_base = HC_REG_MAIN_MEMORY + + BP_PORT(bp) * (main_mem_size * 4); + main_mem_prty_clr = HC_REG_HC_PRTY_STS_CLR; + main_mem_width = 8; + + val = REG_RD(bp, main_mem_prty_clr); + if (val) + DP(BNX2X_MSG_MCP, "Hmmm... Parity errors in HC " + "block during " + "function init (0x%x)!\n", val); + + /* Clear "false" parity errors in MSI-X table */ + for (i = main_mem_base; + i < main_mem_base + main_mem_size * 4; + i += main_mem_width) { + bnx2x_read_dmae(bp, i, main_mem_width / 4); + bnx2x_write_dmae(bp, bnx2x_sp_mapping(bp, wb_data), + i, main_mem_width / 4); + } + /* Clear HC parity attention */ + REG_RD(bp, main_mem_prty_clr); + } + +#ifdef BNX2X_STOP_ON_ERROR + /* Enable STORMs SP logging */ + REG_WR8(bp, BAR_USTRORM_INTMEM + + USTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1); + REG_WR8(bp, BAR_TSTRORM_INTMEM + + TSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1); + REG_WR8(bp, BAR_CSTRORM_INTMEM + + CSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1); + REG_WR8(bp, BAR_XSTRORM_INTMEM + + XSTORM_RECORD_SLOW_PATH_OFFSET(BP_FUNC(bp)), 1); +#endif + + bnx2x_phy_probe(&bp->link_params); + + return 0; +} + + +void bnx2x_free_mem(struct bnx2x *bp) +{ + /* fastpath */ + bnx2x_free_fp_mem(bp); + /* end of fastpath */ + + BNX2X_PCI_FREE(bp->def_status_blk, bp->def_status_blk_mapping, + sizeof(struct host_sp_status_block)); + + BNX2X_PCI_FREE(bp->fw_stats, bp->fw_stats_mapping, + bp->fw_stats_data_sz + bp->fw_stats_req_sz); + + BNX2X_PCI_FREE(bp->slowpath, bp->slowpath_mapping, + sizeof(struct bnx2x_slowpath)); + + BNX2X_PCI_FREE(bp->context.vcxt, bp->context.cxt_mapping, + bp->context.size); + + bnx2x_ilt_mem_op(bp, ILT_MEMOP_FREE); + + BNX2X_FREE(bp->ilt->lines); + +#ifdef BCM_CNIC + if (!CHIP_IS_E1x(bp)) + BNX2X_PCI_FREE(bp->cnic_sb.e2_sb, bp->cnic_sb_mapping, + sizeof(struct host_hc_status_block_e2)); + else + BNX2X_PCI_FREE(bp->cnic_sb.e1x_sb, bp->cnic_sb_mapping, + sizeof(struct host_hc_status_block_e1x)); + + BNX2X_PCI_FREE(bp->t2, bp->t2_mapping, SRC_T2_SZ); +#endif + + BNX2X_PCI_FREE(bp->spq, bp->spq_mapping, BCM_PAGE_SIZE); + + BNX2X_PCI_FREE(bp->eq_ring, bp->eq_mapping, + BCM_PAGE_SIZE * NUM_EQ_PAGES); +} + +static inline int bnx2x_alloc_fw_stats_mem(struct bnx2x *bp) +{ + int num_groups; + + /* number of eth_queues */ + u8 num_queue_stats = BNX2X_NUM_ETH_QUEUES(bp); + + /* Total number of FW statistics requests = + * 1 for port stats + 1 for PF stats + num_eth_queues */ + bp->fw_stats_num = 2 + num_queue_stats; + + + /* Request is built from stats_query_header and an array of + * stats_query_cmd_group each of which contains + * STATS_QUERY_CMD_COUNT rules. The real number or requests is + * configured in the stats_query_header. + */ + num_groups = (2 + num_queue_stats) / STATS_QUERY_CMD_COUNT + + (((2 + num_queue_stats) % STATS_QUERY_CMD_COUNT) ? 1 : 0); + + bp->fw_stats_req_sz = sizeof(struct stats_query_header) + + num_groups * sizeof(struct stats_query_cmd_group); + + /* Data for statistics requests + stats_conter + * + * stats_counter holds per-STORM counters that are incremented + * when STORM has finished with the current request. + */ + bp->fw_stats_data_sz = sizeof(struct per_port_stats) + + sizeof(struct per_pf_stats) + + sizeof(struct per_queue_stats) * num_queue_stats + + sizeof(struct stats_counter); + + BNX2X_PCI_ALLOC(bp->fw_stats, &bp->fw_stats_mapping, + bp->fw_stats_data_sz + bp->fw_stats_req_sz); + + /* Set shortcuts */ + bp->fw_stats_req = (struct bnx2x_fw_stats_req *)bp->fw_stats; + bp->fw_stats_req_mapping = bp->fw_stats_mapping; + + bp->fw_stats_data = (struct bnx2x_fw_stats_data *) + ((u8 *)bp->fw_stats + bp->fw_stats_req_sz); + + bp->fw_stats_data_mapping = bp->fw_stats_mapping + + bp->fw_stats_req_sz; + return 0; + +alloc_mem_err: + BNX2X_PCI_FREE(bp->fw_stats, bp->fw_stats_mapping, + bp->fw_stats_data_sz + bp->fw_stats_req_sz); + return -ENOMEM; +} + + +int bnx2x_alloc_mem(struct bnx2x *bp) +{ +#ifdef BCM_CNIC + if (!CHIP_IS_E1x(bp)) + /* size = the status block + ramrod buffers */ + BNX2X_PCI_ALLOC(bp->cnic_sb.e2_sb, &bp->cnic_sb_mapping, + sizeof(struct host_hc_status_block_e2)); + else + BNX2X_PCI_ALLOC(bp->cnic_sb.e1x_sb, &bp->cnic_sb_mapping, + sizeof(struct host_hc_status_block_e1x)); + + /* allocate searcher T2 table */ + BNX2X_PCI_ALLOC(bp->t2, &bp->t2_mapping, SRC_T2_SZ); +#endif + + + BNX2X_PCI_ALLOC(bp->def_status_blk, &bp->def_status_blk_mapping, + sizeof(struct host_sp_status_block)); + + BNX2X_PCI_ALLOC(bp->slowpath, &bp->slowpath_mapping, + sizeof(struct bnx2x_slowpath)); + + /* Allocated memory for FW statistics */ + if (bnx2x_alloc_fw_stats_mem(bp)) + goto alloc_mem_err; + + bp->context.size = sizeof(union cdu_context) * BNX2X_L2_CID_COUNT(bp); + + BNX2X_PCI_ALLOC(bp->context.vcxt, &bp->context.cxt_mapping, + bp->context.size); + + BNX2X_ALLOC(bp->ilt->lines, sizeof(struct ilt_line) * ILT_MAX_LINES); + + if (bnx2x_ilt_mem_op(bp, ILT_MEMOP_ALLOC)) + goto alloc_mem_err; + + /* Slow path ring */ + BNX2X_PCI_ALLOC(bp->spq, &bp->spq_mapping, BCM_PAGE_SIZE); + + /* EQ */ + BNX2X_PCI_ALLOC(bp->eq_ring, &bp->eq_mapping, + BCM_PAGE_SIZE * NUM_EQ_PAGES); + + + /* fastpath */ + /* need to be done at the end, since it's self adjusting to amount + * of memory available for RSS queues + */ + if (bnx2x_alloc_fp_mem(bp)) + goto alloc_mem_err; + return 0; + +alloc_mem_err: + bnx2x_free_mem(bp); + return -ENOMEM; +} + +/* + * Init service functions + */ + +int bnx2x_set_mac_one(struct bnx2x *bp, u8 *mac, + struct bnx2x_vlan_mac_obj *obj, bool set, + int mac_type, unsigned long *ramrod_flags) +{ + int rc; + struct bnx2x_vlan_mac_ramrod_params ramrod_param; + + memset(&ramrod_param, 0, sizeof(ramrod_param)); + + /* Fill general parameters */ + ramrod_param.vlan_mac_obj = obj; + ramrod_param.ramrod_flags = *ramrod_flags; + + /* Fill a user request section if needed */ + if (!test_bit(RAMROD_CONT, ramrod_flags)) { + memcpy(ramrod_param.user_req.u.mac.mac, mac, ETH_ALEN); + + __set_bit(mac_type, &ramrod_param.user_req.vlan_mac_flags); + + /* Set the command: ADD or DEL */ + if (set) + ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD; + else + ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_DEL; + } + + rc = bnx2x_config_vlan_mac(bp, &ramrod_param); + if (rc < 0) + BNX2X_ERR("%s MAC failed\n", (set ? "Set" : "Del")); + return rc; +} + +int bnx2x_del_all_macs(struct bnx2x *bp, + struct bnx2x_vlan_mac_obj *mac_obj, + int mac_type, bool wait_for_comp) +{ + int rc; + unsigned long ramrod_flags = 0, vlan_mac_flags = 0; + + /* Wait for completion of requested */ + if (wait_for_comp) + __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); + + /* Set the mac type of addresses we want to clear */ + __set_bit(mac_type, &vlan_mac_flags); + + rc = mac_obj->delete_all(bp, mac_obj, &vlan_mac_flags, &ramrod_flags); + if (rc < 0) + BNX2X_ERR("Failed to delete MACs: %d\n", rc); + + return rc; +} + +int bnx2x_set_eth_mac(struct bnx2x *bp, bool set) +{ + unsigned long ramrod_flags = 0; + + DP(NETIF_MSG_IFUP, "Adding Eth MAC\n"); + + __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); + /* Eth MAC is set on RSS leading client (fp[0]) */ + return bnx2x_set_mac_one(bp, bp->dev->dev_addr, &bp->fp->mac_obj, set, + BNX2X_ETH_MAC, &ramrod_flags); +} + +int bnx2x_setup_leading(struct bnx2x *bp) +{ + return bnx2x_setup_queue(bp, &bp->fp[0], 1); +} + +/** + * bnx2x_set_int_mode - configure interrupt mode + * + * @bp: driver handle + * + * In case of MSI-X it will also try to enable MSI-X. + */ +static void __devinit bnx2x_set_int_mode(struct bnx2x *bp) +{ + switch (int_mode) { + case INT_MODE_MSI: + bnx2x_enable_msi(bp); + /* falling through... */ + case INT_MODE_INTx: + bp->num_queues = 1 + NON_ETH_CONTEXT_USE; + DP(NETIF_MSG_IFUP, "set number of queues to 1\n"); + break; + default: + /* Set number of queues according to bp->multi_mode value */ + bnx2x_set_num_queues(bp); + + DP(NETIF_MSG_IFUP, "set number of queues to %d\n", + bp->num_queues); + + /* if we can't use MSI-X we only need one fp, + * so try to enable MSI-X with the requested number of fp's + * and fallback to MSI or legacy INTx with one fp + */ + if (bnx2x_enable_msix(bp)) { + /* failed to enable MSI-X */ + if (bp->multi_mode) + DP(NETIF_MSG_IFUP, + "Multi requested but failed to " + "enable MSI-X (%d), " + "set number of queues to %d\n", + bp->num_queues, + 1 + NON_ETH_CONTEXT_USE); + bp->num_queues = 1 + NON_ETH_CONTEXT_USE; + + /* Try to enable MSI */ + if (!(bp->flags & DISABLE_MSI_FLAG)) + bnx2x_enable_msi(bp); + } + break; + } +} + +/* must be called prioir to any HW initializations */ +static inline u16 bnx2x_cid_ilt_lines(struct bnx2x *bp) +{ + return L2_ILT_LINES(bp); +} + +void bnx2x_ilt_set_info(struct bnx2x *bp) +{ + struct ilt_client_info *ilt_client; + struct bnx2x_ilt *ilt = BP_ILT(bp); + u16 line = 0; + + ilt->start_line = FUNC_ILT_BASE(BP_FUNC(bp)); + DP(BNX2X_MSG_SP, "ilt starts at line %d\n", ilt->start_line); + + /* CDU */ + ilt_client = &ilt->clients[ILT_CLIENT_CDU]; + ilt_client->client_num = ILT_CLIENT_CDU; + ilt_client->page_size = CDU_ILT_PAGE_SZ; + ilt_client->flags = ILT_CLIENT_SKIP_MEM; + ilt_client->start = line; + line += bnx2x_cid_ilt_lines(bp); +#ifdef BCM_CNIC + line += CNIC_ILT_LINES; +#endif + ilt_client->end = line - 1; + + DP(BNX2X_MSG_SP, "ilt client[CDU]: start %d, end %d, psz 0x%x, " + "flags 0x%x, hw psz %d\n", + ilt_client->start, + ilt_client->end, + ilt_client->page_size, + ilt_client->flags, + ilog2(ilt_client->page_size >> 12)); + + /* QM */ + if (QM_INIT(bp->qm_cid_count)) { + ilt_client = &ilt->clients[ILT_CLIENT_QM]; + ilt_client->client_num = ILT_CLIENT_QM; + ilt_client->page_size = QM_ILT_PAGE_SZ; + ilt_client->flags = 0; + ilt_client->start = line; + + /* 4 bytes for each cid */ + line += DIV_ROUND_UP(bp->qm_cid_count * QM_QUEUES_PER_FUNC * 4, + QM_ILT_PAGE_SZ); + + ilt_client->end = line - 1; + + DP(BNX2X_MSG_SP, "ilt client[QM]: start %d, end %d, psz 0x%x, " + "flags 0x%x, hw psz %d\n", + ilt_client->start, + ilt_client->end, + ilt_client->page_size, + ilt_client->flags, + ilog2(ilt_client->page_size >> 12)); + + } + /* SRC */ + ilt_client = &ilt->clients[ILT_CLIENT_SRC]; +#ifdef BCM_CNIC + ilt_client->client_num = ILT_CLIENT_SRC; + ilt_client->page_size = SRC_ILT_PAGE_SZ; + ilt_client->flags = 0; + ilt_client->start = line; + line += SRC_ILT_LINES; + ilt_client->end = line - 1; + + DP(BNX2X_MSG_SP, "ilt client[SRC]: start %d, end %d, psz 0x%x, " + "flags 0x%x, hw psz %d\n", + ilt_client->start, + ilt_client->end, + ilt_client->page_size, + ilt_client->flags, + ilog2(ilt_client->page_size >> 12)); + +#else + ilt_client->flags = (ILT_CLIENT_SKIP_INIT | ILT_CLIENT_SKIP_MEM); +#endif + + /* TM */ + ilt_client = &ilt->clients[ILT_CLIENT_TM]; +#ifdef BCM_CNIC + ilt_client->client_num = ILT_CLIENT_TM; + ilt_client->page_size = TM_ILT_PAGE_SZ; + ilt_client->flags = 0; + ilt_client->start = line; + line += TM_ILT_LINES; + ilt_client->end = line - 1; + + DP(BNX2X_MSG_SP, "ilt client[TM]: start %d, end %d, psz 0x%x, " + "flags 0x%x, hw psz %d\n", + ilt_client->start, + ilt_client->end, + ilt_client->page_size, + ilt_client->flags, + ilog2(ilt_client->page_size >> 12)); + +#else + ilt_client->flags = (ILT_CLIENT_SKIP_INIT | ILT_CLIENT_SKIP_MEM); +#endif + BUG_ON(line > ILT_MAX_LINES); +} + +/** + * bnx2x_pf_q_prep_init - prepare INIT transition parameters + * + * @bp: driver handle + * @fp: pointer to fastpath + * @init_params: pointer to parameters structure + * + * parameters configured: + * - HC configuration + * - Queue's CDU context + */ +static inline void bnx2x_pf_q_prep_init(struct bnx2x *bp, + struct bnx2x_fastpath *fp, struct bnx2x_queue_init_params *init_params) +{ + + u8 cos; + /* FCoE Queue uses Default SB, thus has no HC capabilities */ + if (!IS_FCOE_FP(fp)) { + __set_bit(BNX2X_Q_FLG_HC, &init_params->rx.flags); + __set_bit(BNX2X_Q_FLG_HC, &init_params->tx.flags); + + /* If HC is supporterd, enable host coalescing in the transition + * to INIT state. + */ + __set_bit(BNX2X_Q_FLG_HC_EN, &init_params->rx.flags); + __set_bit(BNX2X_Q_FLG_HC_EN, &init_params->tx.flags); + + /* HC rate */ + init_params->rx.hc_rate = bp->rx_ticks ? + (1000000 / bp->rx_ticks) : 0; + init_params->tx.hc_rate = bp->tx_ticks ? + (1000000 / bp->tx_ticks) : 0; + + /* FW SB ID */ + init_params->rx.fw_sb_id = init_params->tx.fw_sb_id = + fp->fw_sb_id; + + /* + * CQ index among the SB indices: FCoE clients uses the default + * SB, therefore it's different. + */ + init_params->rx.sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS; + init_params->tx.sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS; + } + + /* set maximum number of COSs supported by this queue */ + init_params->max_cos = fp->max_cos; + + DP(BNX2X_MSG_SP, "fp: %d setting queue params max cos to: %d\n", + fp->index, init_params->max_cos); + + /* set the context pointers queue object */ + for (cos = FIRST_TX_COS_INDEX; cos < init_params->max_cos; cos++) + init_params->cxts[cos] = + &bp->context.vcxt[fp->txdata[cos].cid].eth; +} + +int bnx2x_setup_tx_only(struct bnx2x *bp, struct bnx2x_fastpath *fp, + struct bnx2x_queue_state_params *q_params, + struct bnx2x_queue_setup_tx_only_params *tx_only_params, + int tx_index, bool leading) +{ + memset(tx_only_params, 0, sizeof(*tx_only_params)); + + /* Set the command */ + q_params->cmd = BNX2X_Q_CMD_SETUP_TX_ONLY; + + /* Set tx-only QUEUE flags: don't zero statistics */ + tx_only_params->flags = bnx2x_get_common_flags(bp, fp, false); + + /* choose the index of the cid to send the slow path on */ + tx_only_params->cid_index = tx_index; + + /* Set general TX_ONLY_SETUP parameters */ + bnx2x_pf_q_prep_general(bp, fp, &tx_only_params->gen_params, tx_index); + + /* Set Tx TX_ONLY_SETUP parameters */ + bnx2x_pf_tx_q_prep(bp, fp, &tx_only_params->txq_params, tx_index); + + DP(BNX2X_MSG_SP, "preparing to send tx-only ramrod for connection:" + "cos %d, primary cid %d, cid %d, " + "client id %d, sp-client id %d, flags %lx\n", + tx_index, q_params->q_obj->cids[FIRST_TX_COS_INDEX], + q_params->q_obj->cids[tx_index], q_params->q_obj->cl_id, + tx_only_params->gen_params.spcl_id, tx_only_params->flags); + + /* send the ramrod */ + return bnx2x_queue_state_change(bp, q_params); +} + + +/** + * bnx2x_setup_queue - setup queue + * + * @bp: driver handle + * @fp: pointer to fastpath + * @leading: is leading + * + * This function performs 2 steps in a Queue state machine + * actually: 1) RESET->INIT 2) INIT->SETUP + */ + +int bnx2x_setup_queue(struct bnx2x *bp, struct bnx2x_fastpath *fp, + bool leading) +{ + struct bnx2x_queue_state_params q_params = {0}; + struct bnx2x_queue_setup_params *setup_params = + &q_params.params.setup; + struct bnx2x_queue_setup_tx_only_params *tx_only_params = + &q_params.params.tx_only; + int rc; + u8 tx_index; + + DP(BNX2X_MSG_SP, "setting up queue %d\n", fp->index); + + /* reset IGU state skip FCoE L2 queue */ + if (!IS_FCOE_FP(fp)) + bnx2x_ack_sb(bp, fp->igu_sb_id, USTORM_ID, 0, + IGU_INT_ENABLE, 0); + + q_params.q_obj = &fp->q_obj; + /* We want to wait for completion in this context */ + __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags); + + /* Prepare the INIT parameters */ + bnx2x_pf_q_prep_init(bp, fp, &q_params.params.init); + + /* Set the command */ + q_params.cmd = BNX2X_Q_CMD_INIT; + + /* Change the state to INIT */ + rc = bnx2x_queue_state_change(bp, &q_params); + if (rc) { + BNX2X_ERR("Queue(%d) INIT failed\n", fp->index); + return rc; + } + + DP(BNX2X_MSG_SP, "init complete\n"); + + + /* Now move the Queue to the SETUP state... */ + memset(setup_params, 0, sizeof(*setup_params)); + + /* Set QUEUE flags */ + setup_params->flags = bnx2x_get_q_flags(bp, fp, leading); + + /* Set general SETUP parameters */ + bnx2x_pf_q_prep_general(bp, fp, &setup_params->gen_params, + FIRST_TX_COS_INDEX); + + bnx2x_pf_rx_q_prep(bp, fp, &setup_params->pause_params, + &setup_params->rxq_params); + + bnx2x_pf_tx_q_prep(bp, fp, &setup_params->txq_params, + FIRST_TX_COS_INDEX); + + /* Set the command */ + q_params.cmd = BNX2X_Q_CMD_SETUP; + + /* Change the state to SETUP */ + rc = bnx2x_queue_state_change(bp, &q_params); + if (rc) { + BNX2X_ERR("Queue(%d) SETUP failed\n", fp->index); + return rc; + } + + /* loop through the relevant tx-only indices */ + for (tx_index = FIRST_TX_ONLY_COS_INDEX; + tx_index < fp->max_cos; + tx_index++) { + + /* prepare and send tx-only ramrod*/ + rc = bnx2x_setup_tx_only(bp, fp, &q_params, + tx_only_params, tx_index, leading); + if (rc) { + BNX2X_ERR("Queue(%d.%d) TX_ONLY_SETUP failed\n", + fp->index, tx_index); + return rc; + } + } + + return rc; +} + +static int bnx2x_stop_queue(struct bnx2x *bp, int index) +{ + struct bnx2x_fastpath *fp = &bp->fp[index]; + struct bnx2x_fp_txdata *txdata; + struct bnx2x_queue_state_params q_params = {0}; + int rc, tx_index; + + DP(BNX2X_MSG_SP, "stopping queue %d cid %d\n", index, fp->cid); + + q_params.q_obj = &fp->q_obj; + /* We want to wait for completion in this context */ + __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags); + + + /* close tx-only connections */ + for (tx_index = FIRST_TX_ONLY_COS_INDEX; + tx_index < fp->max_cos; + tx_index++){ + + /* ascertain this is a normal queue*/ + txdata = &fp->txdata[tx_index]; + + DP(BNX2X_MSG_SP, "stopping tx-only queue %d\n", + txdata->txq_index); + + /* send halt terminate on tx-only connection */ + q_params.cmd = BNX2X_Q_CMD_TERMINATE; + memset(&q_params.params.terminate, 0, + sizeof(q_params.params.terminate)); + q_params.params.terminate.cid_index = tx_index; + + rc = bnx2x_queue_state_change(bp, &q_params); + if (rc) + return rc; + + /* send halt terminate on tx-only connection */ + q_params.cmd = BNX2X_Q_CMD_CFC_DEL; + memset(&q_params.params.cfc_del, 0, + sizeof(q_params.params.cfc_del)); + q_params.params.cfc_del.cid_index = tx_index; + rc = bnx2x_queue_state_change(bp, &q_params); + if (rc) + return rc; + } + /* Stop the primary connection: */ + /* ...halt the connection */ + q_params.cmd = BNX2X_Q_CMD_HALT; + rc = bnx2x_queue_state_change(bp, &q_params); + if (rc) + return rc; + + /* ...terminate the connection */ + q_params.cmd = BNX2X_Q_CMD_TERMINATE; + memset(&q_params.params.terminate, 0, + sizeof(q_params.params.terminate)); + q_params.params.terminate.cid_index = FIRST_TX_COS_INDEX; + rc = bnx2x_queue_state_change(bp, &q_params); + if (rc) + return rc; + /* ...delete cfc entry */ + q_params.cmd = BNX2X_Q_CMD_CFC_DEL; + memset(&q_params.params.cfc_del, 0, + sizeof(q_params.params.cfc_del)); + q_params.params.cfc_del.cid_index = FIRST_TX_COS_INDEX; + return bnx2x_queue_state_change(bp, &q_params); +} + + +static void bnx2x_reset_func(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + int func = BP_FUNC(bp); + int i; + + /* Disable the function in the FW */ + REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(func), 0); + REG_WR8(bp, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(func), 0); + REG_WR8(bp, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(func), 0); + REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(func), 0); + + /* FP SBs */ + for_each_eth_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + REG_WR8(bp, BAR_CSTRORM_INTMEM + + CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET(fp->fw_sb_id), + SB_DISABLED); + } + +#ifdef BCM_CNIC + /* CNIC SB */ + REG_WR8(bp, BAR_CSTRORM_INTMEM + + CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET(bnx2x_cnic_fw_sb_id(bp)), + SB_DISABLED); +#endif + /* SP SB */ + REG_WR8(bp, BAR_CSTRORM_INTMEM + + CSTORM_SP_STATUS_BLOCK_DATA_STATE_OFFSET(func), + SB_DISABLED); + + for (i = 0; i < XSTORM_SPQ_DATA_SIZE / 4; i++) + REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_DATA_OFFSET(func), + 0); + + /* Configure IGU */ + if (bp->common.int_block == INT_BLOCK_HC) { + REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0); + REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0); + } else { + REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, 0); + REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, 0); + } + +#ifdef BCM_CNIC + /* Disable Timer scan */ + REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 0); + /* + * Wait for at least 10ms and up to 2 second for the timers scan to + * complete + */ + for (i = 0; i < 200; i++) { + msleep(10); + if (!REG_RD(bp, TM_REG_LIN0_SCAN_ON + port*4)) + break; + } +#endif + /* Clear ILT */ + bnx2x_clear_func_ilt(bp, func); + + /* Timers workaround bug for E2: if this is vnic-3, + * we need to set the entire ilt range for this timers. + */ + if (!CHIP_IS_E1x(bp) && BP_VN(bp) == 3) { + struct ilt_client_info ilt_cli; + /* use dummy TM client */ + memset(&ilt_cli, 0, sizeof(struct ilt_client_info)); + ilt_cli.start = 0; + ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1; + ilt_cli.client_num = ILT_CLIENT_TM; + + bnx2x_ilt_boundry_init_op(bp, &ilt_cli, 0, INITOP_CLEAR); + } + + /* this assumes that reset_port() called before reset_func()*/ + if (!CHIP_IS_E1x(bp)) + bnx2x_pf_disable(bp); + + bp->dmae_ready = 0; +} + +static void bnx2x_reset_port(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + u32 val; + + /* Reset physical Link */ + bnx2x__link_reset(bp); + + REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0); + + /* Do not rcv packets to BRB */ + REG_WR(bp, NIG_REG_LLH0_BRB1_DRV_MASK + port*4, 0x0); + /* Do not direct rcv packets that are not for MCP to the BRB */ + REG_WR(bp, (port ? NIG_REG_LLH1_BRB1_NOT_MCP : + NIG_REG_LLH0_BRB1_NOT_MCP), 0x0); + + /* Configure AEU */ + REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4, 0); + + msleep(100); + /* Check for BRB port occupancy */ + val = REG_RD(bp, BRB1_REG_PORT_NUM_OCC_BLOCKS_0 + port*4); + if (val) + DP(NETIF_MSG_IFDOWN, + "BRB1 is not empty %d blocks are occupied\n", val); + + /* TODO: Close Doorbell port? */ +} + +static inline int bnx2x_reset_hw(struct bnx2x *bp, u32 load_code) +{ + struct bnx2x_func_state_params func_params = {0}; + + /* Prepare parameters for function state transitions */ + __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); + + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_HW_RESET; + + func_params.params.hw_init.load_phase = load_code; + + return bnx2x_func_state_change(bp, &func_params); +} + +static inline int bnx2x_func_stop(struct bnx2x *bp) +{ + struct bnx2x_func_state_params func_params = {0}; + int rc; + + /* Prepare parameters for function state transitions */ + __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_STOP; + + /* + * Try to stop the function the 'good way'. If fails (in case + * of a parity error during bnx2x_chip_cleanup()) and we are + * not in a debug mode, perform a state transaction in order to + * enable further HW_RESET transaction. + */ + rc = bnx2x_func_state_change(bp, &func_params); + if (rc) { +#ifdef BNX2X_STOP_ON_ERROR + return rc; +#else + BNX2X_ERR("FUNC_STOP ramrod failed. Running a dry " + "transaction\n"); + __set_bit(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags); + return bnx2x_func_state_change(bp, &func_params); +#endif + } + + return 0; +} + +/** + * bnx2x_send_unload_req - request unload mode from the MCP. + * + * @bp: driver handle + * @unload_mode: requested function's unload mode + * + * Return unload mode returned by the MCP: COMMON, PORT or FUNC. + */ +u32 bnx2x_send_unload_req(struct bnx2x *bp, int unload_mode) +{ + u32 reset_code = 0; + int port = BP_PORT(bp); + + /* Select the UNLOAD request mode */ + if (unload_mode == UNLOAD_NORMAL) + reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; + + else if (bp->flags & NO_WOL_FLAG) + reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP; + + else if (bp->wol) { + u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + u8 *mac_addr = bp->dev->dev_addr; + u32 val; ++ u16 pmc; ++ + /* The mac address is written to entries 1-4 to - preserve entry 0 which is used by the PMF */ ++ * preserve entry 0 which is used by the PMF ++ */ + u8 entry = (BP_VN(bp) + 1)*8; + + val = (mac_addr[0] << 8) | mac_addr[1]; + EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry, val); + + val = (mac_addr[2] << 24) | (mac_addr[3] << 16) | + (mac_addr[4] << 8) | mac_addr[5]; + EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry + 4, val); + ++ /* Enable the PME and clear the status */ ++ pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, &pmc); ++ pmc |= PCI_PM_CTRL_PME_ENABLE | PCI_PM_CTRL_PME_STATUS; ++ pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, pmc); ++ + reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN; + + } else + reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; + + /* Send the request to the MCP */ + if (!BP_NOMCP(bp)) + reset_code = bnx2x_fw_command(bp, reset_code, 0); + else { + int path = BP_PATH(bp); + + DP(NETIF_MSG_IFDOWN, "NO MCP - load counts[%d] " + "%d, %d, %d\n", + path, load_count[path][0], load_count[path][1], + load_count[path][2]); + load_count[path][0]--; + load_count[path][1 + port]--; + DP(NETIF_MSG_IFDOWN, "NO MCP - new load counts[%d] " + "%d, %d, %d\n", + path, load_count[path][0], load_count[path][1], + load_count[path][2]); + if (load_count[path][0] == 0) + reset_code = FW_MSG_CODE_DRV_UNLOAD_COMMON; + else if (load_count[path][1 + port] == 0) + reset_code = FW_MSG_CODE_DRV_UNLOAD_PORT; + else + reset_code = FW_MSG_CODE_DRV_UNLOAD_FUNCTION; + } + + return reset_code; +} + +/** + * bnx2x_send_unload_done - send UNLOAD_DONE command to the MCP. + * + * @bp: driver handle + */ +void bnx2x_send_unload_done(struct bnx2x *bp) +{ + /* Report UNLOAD_DONE to MCP */ + if (!BP_NOMCP(bp)) + bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0); +} + +static inline int bnx2x_func_wait_started(struct bnx2x *bp) +{ + int tout = 50; + int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0; + + if (!bp->port.pmf) + return 0; + + /* + * (assumption: No Attention from MCP at this stage) + * PMF probably in the middle of TXdisable/enable transaction + * 1. Sync IRS for default SB + * 2. Sync SP queue - this guarantes us that attention handling started + * 3. Wait, that TXdisable/enable transaction completes + * + * 1+2 guranty that if DCBx attention was scheduled it already changed + * pending bit of transaction from STARTED-->TX_STOPPED, if we alredy + * received complettion for the transaction the state is TX_STOPPED. + * State will return to STARTED after completion of TX_STOPPED-->STARTED + * transaction. + */ + + /* make sure default SB ISR is done */ + if (msix) + synchronize_irq(bp->msix_table[0].vector); + else + synchronize_irq(bp->pdev->irq); + + flush_workqueue(bnx2x_wq); + + while (bnx2x_func_get_state(bp, &bp->func_obj) != + BNX2X_F_STATE_STARTED && tout--) + msleep(20); + + if (bnx2x_func_get_state(bp, &bp->func_obj) != + BNX2X_F_STATE_STARTED) { +#ifdef BNX2X_STOP_ON_ERROR + return -EBUSY; +#else + /* + * Failed to complete the transaction in a "good way" + * Force both transactions with CLR bit + */ + struct bnx2x_func_state_params func_params = {0}; + + DP(BNX2X_MSG_SP, "Hmmm... unexpected function state! " + "Forcing STARTED-->TX_ST0PPED-->STARTED\n"); + + func_params.f_obj = &bp->func_obj; + __set_bit(RAMROD_DRV_CLR_ONLY, + &func_params.ramrod_flags); + + /* STARTED-->TX_ST0PPED */ + func_params.cmd = BNX2X_F_CMD_TX_STOP; + bnx2x_func_state_change(bp, &func_params); + + /* TX_ST0PPED-->STARTED */ + func_params.cmd = BNX2X_F_CMD_TX_START; + return bnx2x_func_state_change(bp, &func_params); +#endif + } + + return 0; +} + +void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode) +{ + int port = BP_PORT(bp); + int i, rc = 0; + u8 cos; + struct bnx2x_mcast_ramrod_params rparam = {0}; + u32 reset_code; + + /* Wait until tx fastpath tasks complete */ + for_each_tx_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + + for_each_cos_in_tx_queue(fp, cos) + rc = bnx2x_clean_tx_queue(bp, &fp->txdata[cos]); +#ifdef BNX2X_STOP_ON_ERROR + if (rc) + return; +#endif + } + + /* Give HW time to discard old tx messages */ + usleep_range(1000, 1000); + + /* Clean all ETH MACs */ + rc = bnx2x_del_all_macs(bp, &bp->fp[0].mac_obj, BNX2X_ETH_MAC, false); + if (rc < 0) + BNX2X_ERR("Failed to delete all ETH macs: %d\n", rc); + + /* Clean up UC list */ + rc = bnx2x_del_all_macs(bp, &bp->fp[0].mac_obj, BNX2X_UC_LIST_MAC, + true); + if (rc < 0) + BNX2X_ERR("Failed to schedule DEL commands for UC MACs list: " + "%d\n", rc); + + /* Disable LLH */ + if (!CHIP_IS_E1(bp)) + REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0); + + /* Set "drop all" (stop Rx). + * We need to take a netif_addr_lock() here in order to prevent + * a race between the completion code and this code. + */ + netif_addr_lock_bh(bp->dev); + /* Schedule the rx_mode command */ + if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state)) + set_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state); + else + bnx2x_set_storm_rx_mode(bp); + + /* Cleanup multicast configuration */ + rparam.mcast_obj = &bp->mcast_obj; + rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL); + if (rc < 0) + BNX2X_ERR("Failed to send DEL multicast command: %d\n", rc); + + netif_addr_unlock_bh(bp->dev); + + + + /* + * Send the UNLOAD_REQUEST to the MCP. This will return if + * this function should perform FUNC, PORT or COMMON HW + * reset. + */ + reset_code = bnx2x_send_unload_req(bp, unload_mode); + + /* + * (assumption: No Attention from MCP at this stage) + * PMF probably in the middle of TXdisable/enable transaction + */ + rc = bnx2x_func_wait_started(bp); + if (rc) { + BNX2X_ERR("bnx2x_func_wait_started failed\n"); +#ifdef BNX2X_STOP_ON_ERROR + return; +#endif + } + + /* Close multi and leading connections + * Completions for ramrods are collected in a synchronous way + */ + for_each_queue(bp, i) + if (bnx2x_stop_queue(bp, i)) +#ifdef BNX2X_STOP_ON_ERROR + return; +#else + goto unload_error; +#endif + /* If SP settings didn't get completed so far - something + * very wrong has happen. + */ + if (!bnx2x_wait_sp_comp(bp, ~0x0UL)) + BNX2X_ERR("Hmmm... Common slow path ramrods got stuck!\n"); + +#ifndef BNX2X_STOP_ON_ERROR +unload_error: +#endif + rc = bnx2x_func_stop(bp); + if (rc) { + BNX2X_ERR("Function stop failed!\n"); +#ifdef BNX2X_STOP_ON_ERROR + return; +#endif + } + + /* Disable HW interrupts, NAPI */ + bnx2x_netif_stop(bp, 1); + + /* Release IRQs */ + bnx2x_free_irq(bp); + + /* Reset the chip */ + rc = bnx2x_reset_hw(bp, reset_code); + if (rc) + BNX2X_ERR("HW_RESET failed\n"); + + + /* Report UNLOAD_DONE to MCP */ + bnx2x_send_unload_done(bp); +} + +void bnx2x_disable_close_the_gate(struct bnx2x *bp) +{ + u32 val; + + DP(NETIF_MSG_HW, "Disabling \"close the gates\"\n"); + + if (CHIP_IS_E1(bp)) { + int port = BP_PORT(bp); + u32 addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 : + MISC_REG_AEU_MASK_ATTN_FUNC_0; + + val = REG_RD(bp, addr); + val &= ~(0x300); + REG_WR(bp, addr, val); + } else { + val = REG_RD(bp, MISC_REG_AEU_GENERAL_MASK); + val &= ~(MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK | + MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK); + REG_WR(bp, MISC_REG_AEU_GENERAL_MASK, val); + } +} + +/* Close gates #2, #3 and #4: */ +static void bnx2x_set_234_gates(struct bnx2x *bp, bool close) +{ + u32 val; + + /* Gates #2 and #4a are closed/opened for "not E1" only */ + if (!CHIP_IS_E1(bp)) { + /* #4 */ + REG_WR(bp, PXP_REG_HST_DISCARD_DOORBELLS, !!close); + /* #2 */ + REG_WR(bp, PXP_REG_HST_DISCARD_INTERNAL_WRITES, !!close); + } + + /* #3 */ + if (CHIP_IS_E1x(bp)) { + /* Prevent interrupts from HC on both ports */ + val = REG_RD(bp, HC_REG_CONFIG_1); + REG_WR(bp, HC_REG_CONFIG_1, + (!close) ? (val | HC_CONFIG_1_REG_BLOCK_DISABLE_1) : + (val & ~(u32)HC_CONFIG_1_REG_BLOCK_DISABLE_1)); + + val = REG_RD(bp, HC_REG_CONFIG_0); + REG_WR(bp, HC_REG_CONFIG_0, + (!close) ? (val | HC_CONFIG_0_REG_BLOCK_DISABLE_0) : + (val & ~(u32)HC_CONFIG_0_REG_BLOCK_DISABLE_0)); + } else { + /* Prevent incomming interrupts in IGU */ + val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION); + + REG_WR(bp, IGU_REG_BLOCK_CONFIGURATION, + (!close) ? + (val | IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE) : + (val & ~(u32)IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE)); + } + + DP(NETIF_MSG_HW, "%s gates #2, #3 and #4\n", + close ? "closing" : "opening"); + mmiowb(); +} + +#define SHARED_MF_CLP_MAGIC 0x80000000 /* `magic' bit */ + +static void bnx2x_clp_reset_prep(struct bnx2x *bp, u32 *magic_val) +{ + /* Do some magic... */ + u32 val = MF_CFG_RD(bp, shared_mf_config.clp_mb); + *magic_val = val & SHARED_MF_CLP_MAGIC; + MF_CFG_WR(bp, shared_mf_config.clp_mb, val | SHARED_MF_CLP_MAGIC); +} + +/** + * bnx2x_clp_reset_done - restore the value of the `magic' bit. + * + * @bp: driver handle + * @magic_val: old value of the `magic' bit. + */ +static void bnx2x_clp_reset_done(struct bnx2x *bp, u32 magic_val) +{ + /* Restore the `magic' bit value... */ + u32 val = MF_CFG_RD(bp, shared_mf_config.clp_mb); + MF_CFG_WR(bp, shared_mf_config.clp_mb, + (val & (~SHARED_MF_CLP_MAGIC)) | magic_val); +} + +/** + * bnx2x_reset_mcp_prep - prepare for MCP reset. + * + * @bp: driver handle + * @magic_val: old value of 'magic' bit. + * + * Takes care of CLP configurations. + */ +static void bnx2x_reset_mcp_prep(struct bnx2x *bp, u32 *magic_val) +{ + u32 shmem; + u32 validity_offset; + + DP(NETIF_MSG_HW, "Starting\n"); + + /* Set `magic' bit in order to save MF config */ + if (!CHIP_IS_E1(bp)) + bnx2x_clp_reset_prep(bp, magic_val); + + /* Get shmem offset */ + shmem = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR); + validity_offset = offsetof(struct shmem_region, validity_map[0]); + + /* Clear validity map flags */ + if (shmem > 0) + REG_WR(bp, shmem + validity_offset, 0); +} + +#define MCP_TIMEOUT 5000 /* 5 seconds (in ms) */ +#define MCP_ONE_TIMEOUT 100 /* 100 ms */ + +/** + * bnx2x_mcp_wait_one - wait for MCP_ONE_TIMEOUT + * + * @bp: driver handle + */ +static inline void bnx2x_mcp_wait_one(struct bnx2x *bp) +{ + /* special handling for emulation and FPGA, + wait 10 times longer */ + if (CHIP_REV_IS_SLOW(bp)) + msleep(MCP_ONE_TIMEOUT*10); + else + msleep(MCP_ONE_TIMEOUT); +} + +/* + * initializes bp->common.shmem_base and waits for validity signature to appear + */ +static int bnx2x_init_shmem(struct bnx2x *bp) +{ + int cnt = 0; + u32 val = 0; + + do { + bp->common.shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR); + if (bp->common.shmem_base) { + val = SHMEM_RD(bp, validity_map[BP_PORT(bp)]); + if (val & SHR_MEM_VALIDITY_MB) + return 0; + } + + bnx2x_mcp_wait_one(bp); + + } while (cnt++ < (MCP_TIMEOUT / MCP_ONE_TIMEOUT)); + + BNX2X_ERR("BAD MCP validity signature\n"); + + return -ENODEV; +} + +static int bnx2x_reset_mcp_comp(struct bnx2x *bp, u32 magic_val) +{ + int rc = bnx2x_init_shmem(bp); + + /* Restore the `magic' bit value */ + if (!CHIP_IS_E1(bp)) + bnx2x_clp_reset_done(bp, magic_val); + + return rc; +} + +static void bnx2x_pxp_prep(struct bnx2x *bp) +{ + if (!CHIP_IS_E1(bp)) { + REG_WR(bp, PXP2_REG_RD_START_INIT, 0); + REG_WR(bp, PXP2_REG_RQ_RBC_DONE, 0); + mmiowb(); + } +} + +/* + * Reset the whole chip except for: + * - PCIE core + * - PCI Glue, PSWHST, PXP/PXP2 RF (all controlled by + * one reset bit) + * - IGU + * - MISC (including AEU) + * - GRC + * - RBCN, RBCP + */ +static void bnx2x_process_kill_chip_reset(struct bnx2x *bp, bool global) +{ + u32 not_reset_mask1, reset_mask1, not_reset_mask2, reset_mask2; + u32 global_bits2, stay_reset2; + + /* + * Bits that have to be set in reset_mask2 if we want to reset 'global' + * (per chip) blocks. + */ + global_bits2 = + MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CPU | + MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CORE; + + /* Don't reset the following blocks */ + not_reset_mask1 = + MISC_REGISTERS_RESET_REG_1_RST_HC | + MISC_REGISTERS_RESET_REG_1_RST_PXPV | + MISC_REGISTERS_RESET_REG_1_RST_PXP; + + not_reset_mask2 = + MISC_REGISTERS_RESET_REG_2_RST_PCI_MDIO | + MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE | + MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE | + MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE | + MISC_REGISTERS_RESET_REG_2_RST_RBCN | + MISC_REGISTERS_RESET_REG_2_RST_GRC | + MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE | + MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B | + MISC_REGISTERS_RESET_REG_2_RST_ATC | + MISC_REGISTERS_RESET_REG_2_PGLC; + + /* + * Keep the following blocks in reset: + * - all xxMACs are handled by the bnx2x_link code. + */ + stay_reset2 = + MISC_REGISTERS_RESET_REG_2_RST_BMAC0 | + MISC_REGISTERS_RESET_REG_2_RST_BMAC1 | + MISC_REGISTERS_RESET_REG_2_RST_EMAC0 | + MISC_REGISTERS_RESET_REG_2_RST_EMAC1 | + MISC_REGISTERS_RESET_REG_2_UMAC0 | + MISC_REGISTERS_RESET_REG_2_UMAC1 | + MISC_REGISTERS_RESET_REG_2_XMAC | + MISC_REGISTERS_RESET_REG_2_XMAC_SOFT; + + /* Full reset masks according to the chip */ + reset_mask1 = 0xffffffff; + + if (CHIP_IS_E1(bp)) + reset_mask2 = 0xffff; + else if (CHIP_IS_E1H(bp)) + reset_mask2 = 0x1ffff; + else if (CHIP_IS_E2(bp)) + reset_mask2 = 0xfffff; + else /* CHIP_IS_E3 */ + reset_mask2 = 0x3ffffff; + + /* Don't reset global blocks unless we need to */ + if (!global) + reset_mask2 &= ~global_bits2; + + /* + * In case of attention in the QM, we need to reset PXP + * (MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR) before QM + * because otherwise QM reset would release 'close the gates' shortly + * before resetting the PXP, then the PSWRQ would send a write + * request to PGLUE. Then when PXP is reset, PGLUE would try to + * read the payload data from PSWWR, but PSWWR would not + * respond. The write queue in PGLUE would stuck, dmae commands + * would not return. Therefore it's important to reset the second + * reset register (containing the + * MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR bit) before the + * first one (containing the MISC_REGISTERS_RESET_REG_1_RST_QM + * bit). + */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + reset_mask2 & (~not_reset_mask2)); + + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, + reset_mask1 & (~not_reset_mask1)); + + barrier(); + mmiowb(); + + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, + reset_mask2 & (~stay_reset2)); + + barrier(); + mmiowb(); + + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, reset_mask1); + mmiowb(); +} + +/** + * bnx2x_er_poll_igu_vq - poll for pending writes bit. + * It should get cleared in no more than 1s. + * + * @bp: driver handle + * + * It should get cleared in no more than 1s. Returns 0 if + * pending writes bit gets cleared. + */ +static int bnx2x_er_poll_igu_vq(struct bnx2x *bp) +{ + u32 cnt = 1000; + u32 pend_bits = 0; + + do { + pend_bits = REG_RD(bp, IGU_REG_PENDING_BITS_STATUS); + + if (pend_bits == 0) + break; + + usleep_range(1000, 1000); + } while (cnt-- > 0); + + if (cnt <= 0) { + BNX2X_ERR("Still pending IGU requests pend_bits=%x!\n", + pend_bits); + return -EBUSY; + } + + return 0; +} + +static int bnx2x_process_kill(struct bnx2x *bp, bool global) +{ + int cnt = 1000; + u32 val = 0; + u32 sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1, pgl_exp_rom2; + + + /* Empty the Tetris buffer, wait for 1s */ + do { + sr_cnt = REG_RD(bp, PXP2_REG_RD_SR_CNT); + blk_cnt = REG_RD(bp, PXP2_REG_RD_BLK_CNT); + port_is_idle_0 = REG_RD(bp, PXP2_REG_RD_PORT_IS_IDLE_0); + port_is_idle_1 = REG_RD(bp, PXP2_REG_RD_PORT_IS_IDLE_1); + pgl_exp_rom2 = REG_RD(bp, PXP2_REG_PGL_EXP_ROM2); + if ((sr_cnt == 0x7e) && (blk_cnt == 0xa0) && + ((port_is_idle_0 & 0x1) == 0x1) && + ((port_is_idle_1 & 0x1) == 0x1) && + (pgl_exp_rom2 == 0xffffffff)) + break; + usleep_range(1000, 1000); + } while (cnt-- > 0); + + if (cnt <= 0) { + DP(NETIF_MSG_HW, "Tetris buffer didn't get empty or there" + " are still" + " outstanding read requests after 1s!\n"); + DP(NETIF_MSG_HW, "sr_cnt=0x%08x, blk_cnt=0x%08x," + " port_is_idle_0=0x%08x," + " port_is_idle_1=0x%08x, pgl_exp_rom2=0x%08x\n", + sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1, + pgl_exp_rom2); + return -EAGAIN; + } + + barrier(); + + /* Close gates #2, #3 and #4 */ + bnx2x_set_234_gates(bp, true); + + /* Poll for IGU VQs for 57712 and newer chips */ + if (!CHIP_IS_E1x(bp) && bnx2x_er_poll_igu_vq(bp)) + return -EAGAIN; + + + /* TBD: Indicate that "process kill" is in progress to MCP */ + + /* Clear "unprepared" bit */ + REG_WR(bp, MISC_REG_UNPREPARED, 0); + barrier(); + + /* Make sure all is written to the chip before the reset */ + mmiowb(); + + /* Wait for 1ms to empty GLUE and PCI-E core queues, + * PSWHST, GRC and PSWRD Tetris buffer. + */ + usleep_range(1000, 1000); + + /* Prepare to chip reset: */ + /* MCP */ + if (global) + bnx2x_reset_mcp_prep(bp, &val); + + /* PXP */ + bnx2x_pxp_prep(bp); + barrier(); + + /* reset the chip */ + bnx2x_process_kill_chip_reset(bp, global); + barrier(); + + /* Recover after reset: */ + /* MCP */ + if (global && bnx2x_reset_mcp_comp(bp, val)) + return -EAGAIN; + + /* TBD: Add resetting the NO_MCP mode DB here */ + + /* PXP */ + bnx2x_pxp_prep(bp); + + /* Open the gates #2, #3 and #4 */ + bnx2x_set_234_gates(bp, false); + + /* TBD: IGU/AEU preparation bring back the AEU/IGU to a + * reset state, re-enable attentions. */ + + return 0; +} + +int bnx2x_leader_reset(struct bnx2x *bp) +{ + int rc = 0; + bool global = bnx2x_reset_is_global(bp); + + /* Try to recover after the failure */ + if (bnx2x_process_kill(bp, global)) { + netdev_err(bp->dev, "Something bad had happen on engine %d! " + "Aii!\n", BP_PATH(bp)); + rc = -EAGAIN; + goto exit_leader_reset; + } + + /* + * Clear RESET_IN_PROGRES and RESET_GLOBAL bits and update the driver + * state. + */ + bnx2x_set_reset_done(bp); + if (global) + bnx2x_clear_reset_global(bp); + +exit_leader_reset: + bp->is_leader = 0; + bnx2x_release_leader_lock(bp); + smp_mb(); + return rc; +} + +static inline void bnx2x_recovery_failed(struct bnx2x *bp) +{ + netdev_err(bp->dev, "Recovery has failed. Power cycle is needed.\n"); + + /* Disconnect this device */ + netif_device_detach(bp->dev); + + /* + * Block ifup for all function on this engine until "process kill" + * or power cycle. + */ + bnx2x_set_reset_in_progress(bp); + + /* Shut down the power */ + bnx2x_set_power_state(bp, PCI_D3hot); + + bp->recovery_state = BNX2X_RECOVERY_FAILED; + + smp_mb(); +} + +/* + * Assumption: runs under rtnl lock. This together with the fact + * that it's called only from bnx2x_sp_rtnl() ensure that it + * will never be called when netif_running(bp->dev) is false. + */ +static void bnx2x_parity_recover(struct bnx2x *bp) +{ + bool global = false; + + DP(NETIF_MSG_HW, "Handling parity\n"); + while (1) { + switch (bp->recovery_state) { + case BNX2X_RECOVERY_INIT: + DP(NETIF_MSG_HW, "State is BNX2X_RECOVERY_INIT\n"); + bnx2x_chk_parity_attn(bp, &global, false); + + /* Try to get a LEADER_LOCK HW lock */ + if (bnx2x_trylock_leader_lock(bp)) { + bnx2x_set_reset_in_progress(bp); + /* + * Check if there is a global attention and if + * there was a global attention, set the global + * reset bit. + */ + + if (global) + bnx2x_set_reset_global(bp); + + bp->is_leader = 1; + } + + /* Stop the driver */ + /* If interface has been removed - break */ + if (bnx2x_nic_unload(bp, UNLOAD_RECOVERY)) + return; + + bp->recovery_state = BNX2X_RECOVERY_WAIT; + + /* + * Reset MCP command sequence number and MCP mail box + * sequence as we are going to reset the MCP. + */ + if (global) { + bp->fw_seq = 0; + bp->fw_drv_pulse_wr_seq = 0; + } + + /* Ensure "is_leader", MCP command sequence and + * "recovery_state" update values are seen on other + * CPUs. + */ + smp_mb(); + break; + + case BNX2X_RECOVERY_WAIT: + DP(NETIF_MSG_HW, "State is BNX2X_RECOVERY_WAIT\n"); + if (bp->is_leader) { + int other_engine = BP_PATH(bp) ? 0 : 1; + u32 other_load_counter = + bnx2x_get_load_cnt(bp, other_engine); + u32 load_counter = + bnx2x_get_load_cnt(bp, BP_PATH(bp)); + global = bnx2x_reset_is_global(bp); + + /* + * In case of a parity in a global block, let + * the first leader that performs a + * leader_reset() reset the global blocks in + * order to clear global attentions. Otherwise + * the the gates will remain closed for that + * engine. + */ + if (load_counter || + (global && other_load_counter)) { + /* Wait until all other functions get + * down. + */ + schedule_delayed_work(&bp->sp_rtnl_task, + HZ/10); + return; + } else { + /* If all other functions got down - + * try to bring the chip back to + * normal. In any case it's an exit + * point for a leader. + */ + if (bnx2x_leader_reset(bp)) { + bnx2x_recovery_failed(bp); + return; + } + + /* If we are here, means that the + * leader has succeeded and doesn't + * want to be a leader any more. Try + * to continue as a none-leader. + */ + break; + } + } else { /* non-leader */ + if (!bnx2x_reset_is_done(bp, BP_PATH(bp))) { + /* Try to get a LEADER_LOCK HW lock as + * long as a former leader may have + * been unloaded by the user or + * released a leadership by another + * reason. + */ + if (bnx2x_trylock_leader_lock(bp)) { + /* I'm a leader now! Restart a + * switch case. + */ + bp->is_leader = 1; + break; + } + + schedule_delayed_work(&bp->sp_rtnl_task, + HZ/10); + return; + + } else { + /* + * If there was a global attention, wait + * for it to be cleared. + */ + if (bnx2x_reset_is_global(bp)) { + schedule_delayed_work( + &bp->sp_rtnl_task, + HZ/10); + return; + } + + if (bnx2x_nic_load(bp, LOAD_NORMAL)) + bnx2x_recovery_failed(bp); + else { + bp->recovery_state = + BNX2X_RECOVERY_DONE; + smp_mb(); + } + + return; + } + } + default: + return; + } + } +} + +/* bnx2x_nic_unload() flushes the bnx2x_wq, thus reset task is + * scheduled on a general queue in order to prevent a dead lock. + */ +static void bnx2x_sp_rtnl_task(struct work_struct *work) +{ + struct bnx2x *bp = container_of(work, struct bnx2x, sp_rtnl_task.work); + + rtnl_lock(); + + if (!netif_running(bp->dev)) + goto sp_rtnl_exit; + + /* if stop on error is defined no recovery flows should be executed */ +#ifdef BNX2X_STOP_ON_ERROR + BNX2X_ERR("recovery flow called but STOP_ON_ERROR defined " + "so reset not done to allow debug dump,\n" + "you will need to reboot when done\n"); + goto sp_rtnl_not_reset; +#endif + + if (unlikely(bp->recovery_state != BNX2X_RECOVERY_DONE)) { + /* + * Clear all pending SP commands as we are going to reset the + * function anyway. + */ + bp->sp_rtnl_state = 0; + smp_mb(); + + bnx2x_parity_recover(bp); + + goto sp_rtnl_exit; + } + + if (test_and_clear_bit(BNX2X_SP_RTNL_TX_TIMEOUT, &bp->sp_rtnl_state)) { + /* + * Clear all pending SP commands as we are going to reset the + * function anyway. + */ + bp->sp_rtnl_state = 0; + smp_mb(); + + bnx2x_nic_unload(bp, UNLOAD_NORMAL); + bnx2x_nic_load(bp, LOAD_NORMAL); + + goto sp_rtnl_exit; + } +#ifdef BNX2X_STOP_ON_ERROR +sp_rtnl_not_reset: +#endif + if (test_and_clear_bit(BNX2X_SP_RTNL_SETUP_TC, &bp->sp_rtnl_state)) + bnx2x_setup_tc(bp->dev, bp->dcbx_port_params.ets.num_of_cos); + +sp_rtnl_exit: + rtnl_unlock(); +} + +/* end of nic load/unload */ + +static void bnx2x_period_task(struct work_struct *work) +{ + struct bnx2x *bp = container_of(work, struct bnx2x, period_task.work); + + if (!netif_running(bp->dev)) + goto period_task_exit; + + if (CHIP_REV_IS_SLOW(bp)) { + BNX2X_ERR("period task called on emulation, ignoring\n"); + goto period_task_exit; + } + + bnx2x_acquire_phy_lock(bp); + /* + * The barrier is needed to ensure the ordering between the writing to + * the bp->port.pmf in the bnx2x_nic_load() or bnx2x_pmf_update() and + * the reading here. + */ + smp_mb(); + if (bp->port.pmf) { + bnx2x_period_func(&bp->link_params, &bp->link_vars); + + /* Re-queue task in 1 sec */ + queue_delayed_work(bnx2x_wq, &bp->period_task, 1*HZ); + } + + bnx2x_release_phy_lock(bp); +period_task_exit: + return; +} + +/* + * Init service functions + */ + +static u32 bnx2x_get_pretend_reg(struct bnx2x *bp) +{ + u32 base = PXP2_REG_PGL_PRETEND_FUNC_F0; + u32 stride = PXP2_REG_PGL_PRETEND_FUNC_F1 - base; + return base + (BP_ABS_FUNC(bp)) * stride; +} + +static void bnx2x_undi_int_disable_e1h(struct bnx2x *bp) +{ + u32 reg = bnx2x_get_pretend_reg(bp); + + /* Flush all outstanding writes */ + mmiowb(); + + /* Pretend to be function 0 */ + REG_WR(bp, reg, 0); + REG_RD(bp, reg); /* Flush the GRC transaction (in the chip) */ + + /* From now we are in the "like-E1" mode */ + bnx2x_int_disable(bp); + + /* Flush all outstanding writes */ + mmiowb(); + + /* Restore the original function */ + REG_WR(bp, reg, BP_ABS_FUNC(bp)); + REG_RD(bp, reg); +} + +static inline void bnx2x_undi_int_disable(struct bnx2x *bp) +{ + if (CHIP_IS_E1(bp)) + bnx2x_int_disable(bp); + else + bnx2x_undi_int_disable_e1h(bp); +} + +static void __devinit bnx2x_undi_unload(struct bnx2x *bp) +{ + u32 val; + + /* Check if there is any driver already loaded */ + val = REG_RD(bp, MISC_REG_UNPREPARED); + if (val == 0x1) { + + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET); + /* + * Check if it is the UNDI driver + * UNDI driver initializes CID offset for normal bell to 0x7 + */ + val = REG_RD(bp, DORQ_REG_NORM_CID_OFST); + if (val == 0x7) { + u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; + /* save our pf_num */ + int orig_pf_num = bp->pf_num; + int port; + u32 swap_en, swap_val, value; + + /* clear the UNDI indication */ + REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0); + + BNX2X_DEV_INFO("UNDI is active! reset device\n"); + + /* try unload UNDI on port 0 */ + bp->pf_num = 0; + bp->fw_seq = + (SHMEM_RD(bp, func_mb[bp->pf_num].drv_mb_header) & + DRV_MSG_SEQ_NUMBER_MASK); + reset_code = bnx2x_fw_command(bp, reset_code, 0); + + /* if UNDI is loaded on the other port */ + if (reset_code != FW_MSG_CODE_DRV_UNLOAD_COMMON) { + + /* send "DONE" for previous unload */ + bnx2x_fw_command(bp, + DRV_MSG_CODE_UNLOAD_DONE, 0); + + /* unload UNDI on port 1 */ + bp->pf_num = 1; + bp->fw_seq = + (SHMEM_RD(bp, func_mb[bp->pf_num].drv_mb_header) & + DRV_MSG_SEQ_NUMBER_MASK); + reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; + + bnx2x_fw_command(bp, reset_code, 0); + } + + bnx2x_undi_int_disable(bp); + port = BP_PORT(bp); + + /* close input traffic and wait for it */ + /* Do not rcv packets to BRB */ + REG_WR(bp, (port ? NIG_REG_LLH1_BRB1_DRV_MASK : + NIG_REG_LLH0_BRB1_DRV_MASK), 0x0); + /* Do not direct rcv packets that are not for MCP to + * the BRB */ + REG_WR(bp, (port ? NIG_REG_LLH1_BRB1_NOT_MCP : + NIG_REG_LLH0_BRB1_NOT_MCP), 0x0); + /* clear AEU */ + REG_WR(bp, (port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 : + MISC_REG_AEU_MASK_ATTN_FUNC_0), 0); + msleep(10); + + /* save NIG port swap info */ + swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); + swap_en = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); + /* reset device */ + REG_WR(bp, + GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, + 0xd3ffffff); + + value = 0x1400; + if (CHIP_IS_E3(bp)) { + value |= MISC_REGISTERS_RESET_REG_2_MSTAT0; + value |= MISC_REGISTERS_RESET_REG_2_MSTAT1; + } + + REG_WR(bp, + GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + value); + + /* take the NIG out of reset and restore swap values */ + REG_WR(bp, + GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, + MISC_REGISTERS_RESET_REG_1_RST_NIG); + REG_WR(bp, NIG_REG_PORT_SWAP, swap_val); + REG_WR(bp, NIG_REG_STRAP_OVERRIDE, swap_en); + + /* send unload done to the MCP */ + bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0); + + /* restore our func and fw_seq */ + bp->pf_num = orig_pf_num; + bp->fw_seq = + (SHMEM_RD(bp, func_mb[bp->pf_num].drv_mb_header) & + DRV_MSG_SEQ_NUMBER_MASK); + } + + /* now it's safe to release the lock */ + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET); + } +} + +static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp) +{ + u32 val, val2, val3, val4, id; + u16 pmc; + + /* Get the chip revision id and number. */ + /* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */ + val = REG_RD(bp, MISC_REG_CHIP_NUM); + id = ((val & 0xffff) << 16); + val = REG_RD(bp, MISC_REG_CHIP_REV); + id |= ((val & 0xf) << 12); + val = REG_RD(bp, MISC_REG_CHIP_METAL); + id |= ((val & 0xff) << 4); + val = REG_RD(bp, MISC_REG_BOND_ID); + id |= (val & 0xf); + bp->common.chip_id = id; + + /* Set doorbell size */ + bp->db_size = (1 << BNX2X_DB_SHIFT); + + if (!CHIP_IS_E1x(bp)) { + val = REG_RD(bp, MISC_REG_PORT4MODE_EN_OVWR); + if ((val & 1) == 0) + val = REG_RD(bp, MISC_REG_PORT4MODE_EN); + else + val = (val >> 1) & 1; + BNX2X_DEV_INFO("chip is in %s\n", val ? "4_PORT_MODE" : + "2_PORT_MODE"); + bp->common.chip_port_mode = val ? CHIP_4_PORT_MODE : + CHIP_2_PORT_MODE; + + if (CHIP_MODE_IS_4_PORT(bp)) + bp->pfid = (bp->pf_num >> 1); /* 0..3 */ + else + bp->pfid = (bp->pf_num & 0x6); /* 0, 2, 4, 6 */ + } else { + bp->common.chip_port_mode = CHIP_PORT_MODE_NONE; /* N/A */ + bp->pfid = bp->pf_num; /* 0..7 */ + } + + bp->link_params.chip_id = bp->common.chip_id; + BNX2X_DEV_INFO("chip ID is 0x%x\n", id); + + val = (REG_RD(bp, 0x2874) & 0x55); + if ((bp->common.chip_id & 0x1) || + (CHIP_IS_E1(bp) && val) || (CHIP_IS_E1H(bp) && (val == 0x55))) { + bp->flags |= ONE_PORT_FLAG; + BNX2X_DEV_INFO("single port device\n"); + } + + val = REG_RD(bp, MCP_REG_MCPR_NVM_CFG4); + bp->common.flash_size = (BNX2X_NVRAM_1MB_SIZE << + (val & MCPR_NVM_CFG4_FLASH_SIZE)); + BNX2X_DEV_INFO("flash_size 0x%x (%d)\n", + bp->common.flash_size, bp->common.flash_size); + + bnx2x_init_shmem(bp); + + + + bp->common.shmem2_base = REG_RD(bp, (BP_PATH(bp) ? + MISC_REG_GENERIC_CR_1 : + MISC_REG_GENERIC_CR_0)); + + bp->link_params.shmem_base = bp->common.shmem_base; + bp->link_params.shmem2_base = bp->common.shmem2_base; + BNX2X_DEV_INFO("shmem offset 0x%x shmem2 offset 0x%x\n", + bp->common.shmem_base, bp->common.shmem2_base); + + if (!bp->common.shmem_base) { + BNX2X_DEV_INFO("MCP not active\n"); + bp->flags |= NO_MCP_FLAG; + return; + } + + bp->common.hw_config = SHMEM_RD(bp, dev_info.shared_hw_config.config); + BNX2X_DEV_INFO("hw_config 0x%08x\n", bp->common.hw_config); + + bp->link_params.hw_led_mode = ((bp->common.hw_config & + SHARED_HW_CFG_LED_MODE_MASK) >> + SHARED_HW_CFG_LED_MODE_SHIFT); + + bp->link_params.feature_config_flags = 0; + val = SHMEM_RD(bp, dev_info.shared_feature_config.config); + if (val & SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED) + bp->link_params.feature_config_flags |= + FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED; + else + bp->link_params.feature_config_flags &= + ~FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED; + + val = SHMEM_RD(bp, dev_info.bc_rev) >> 8; + bp->common.bc_ver = val; + BNX2X_DEV_INFO("bc_ver %X\n", val); + if (val < BNX2X_BC_VER) { + /* for now only warn + * later we might need to enforce this */ + BNX2X_ERR("This driver needs bc_ver %X but found %X, " + "please upgrade BC\n", BNX2X_BC_VER, val); + } + bp->link_params.feature_config_flags |= + (val >= REQ_BC_VER_4_VRFY_FIRST_PHY_OPT_MDL) ? + FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY : 0; + + bp->link_params.feature_config_flags |= + (val >= REQ_BC_VER_4_VRFY_SPECIFIC_PHY_OPT_MDL) ? + FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY : 0; + + bp->link_params.feature_config_flags |= + (val >= REQ_BC_VER_4_SFP_TX_DISABLE_SUPPORTED) ? + FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED : 0; + + pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_PMC, &pmc); + bp->flags |= (pmc & PCI_PM_CAP_PME_D3cold) ? 0 : NO_WOL_FLAG; + + BNX2X_DEV_INFO("%sWoL capable\n", + (bp->flags & NO_WOL_FLAG) ? "not " : ""); + + val = SHMEM_RD(bp, dev_info.shared_hw_config.part_num); + val2 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[4]); + val3 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[8]); + val4 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[12]); + + dev_info(&bp->pdev->dev, "part number %X-%X-%X-%X\n", + val, val2, val3, val4); +} + +#define IGU_FID(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID) +#define IGU_VEC(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_VECTOR) + +static void __devinit bnx2x_get_igu_cam_info(struct bnx2x *bp) +{ + int pfid = BP_FUNC(bp); + int igu_sb_id; + u32 val; + u8 fid, igu_sb_cnt = 0; + + bp->igu_base_sb = 0xff; + if (CHIP_INT_MODE_IS_BC(bp)) { + int vn = BP_VN(bp); + igu_sb_cnt = bp->igu_sb_cnt; + bp->igu_base_sb = (CHIP_MODE_IS_4_PORT(bp) ? pfid : vn) * + FP_SB_MAX_E1x; + + bp->igu_dsb_id = E1HVN_MAX * FP_SB_MAX_E1x + + (CHIP_MODE_IS_4_PORT(bp) ? pfid : vn); + + return; + } + + /* IGU in normal mode - read CAM */ + for (igu_sb_id = 0; igu_sb_id < IGU_REG_MAPPING_MEMORY_SIZE; + igu_sb_id++) { + val = REG_RD(bp, IGU_REG_MAPPING_MEMORY + igu_sb_id * 4); + if (!(val & IGU_REG_MAPPING_MEMORY_VALID)) + continue; + fid = IGU_FID(val); + if ((fid & IGU_FID_ENCODE_IS_PF)) { + if ((fid & IGU_FID_PF_NUM_MASK) != pfid) + continue; + if (IGU_VEC(val) == 0) + /* default status block */ + bp->igu_dsb_id = igu_sb_id; + else { + if (bp->igu_base_sb == 0xff) + bp->igu_base_sb = igu_sb_id; + igu_sb_cnt++; + } + } + } + +#ifdef CONFIG_PCI_MSI + /* + * It's expected that number of CAM entries for this functions is equal + * to the number evaluated based on the MSI-X table size. We want a + * harsh warning if these values are different! + */ + WARN_ON(bp->igu_sb_cnt != igu_sb_cnt); +#endif + + if (igu_sb_cnt == 0) + BNX2X_ERR("CAM configuration error\n"); +} + +static void __devinit bnx2x_link_settings_supported(struct bnx2x *bp, + u32 switch_cfg) +{ + int cfg_size = 0, idx, port = BP_PORT(bp); + + /* Aggregation of supported attributes of all external phys */ + bp->port.supported[0] = 0; + bp->port.supported[1] = 0; + switch (bp->link_params.num_phys) { + case 1: + bp->port.supported[0] = bp->link_params.phy[INT_PHY].supported; + cfg_size = 1; + break; + case 2: + bp->port.supported[0] = bp->link_params.phy[EXT_PHY1].supported; + cfg_size = 1; + break; + case 3: + if (bp->link_params.multi_phy_config & + PORT_HW_CFG_PHY_SWAPPED_ENABLED) { + bp->port.supported[1] = + bp->link_params.phy[EXT_PHY1].supported; + bp->port.supported[0] = + bp->link_params.phy[EXT_PHY2].supported; + } else { + bp->port.supported[0] = + bp->link_params.phy[EXT_PHY1].supported; + bp->port.supported[1] = + bp->link_params.phy[EXT_PHY2].supported; + } + cfg_size = 2; + break; + } + + if (!(bp->port.supported[0] || bp->port.supported[1])) { + BNX2X_ERR("NVRAM config error. BAD phy config." + "PHY1 config 0x%x, PHY2 config 0x%x\n", + SHMEM_RD(bp, + dev_info.port_hw_config[port].external_phy_config), + SHMEM_RD(bp, + dev_info.port_hw_config[port].external_phy_config2)); + return; + } + + if (CHIP_IS_E3(bp)) + bp->port.phy_addr = REG_RD(bp, MISC_REG_WC0_CTRL_PHY_ADDR); + else { + switch (switch_cfg) { + case SWITCH_CFG_1G: + bp->port.phy_addr = REG_RD( + bp, NIG_REG_SERDES0_CTRL_PHY_ADDR + port*0x10); + break; + case SWITCH_CFG_10G: + bp->port.phy_addr = REG_RD( + bp, NIG_REG_XGXS0_CTRL_PHY_ADDR + port*0x18); + break; + default: + BNX2X_ERR("BAD switch_cfg link_config 0x%x\n", + bp->port.link_config[0]); + return; + } + } + BNX2X_DEV_INFO("phy_addr 0x%x\n", bp->port.phy_addr); + /* mask what we support according to speed_cap_mask per configuration */ + for (idx = 0; idx < cfg_size; idx++) { + if (!(bp->link_params.speed_cap_mask[idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) + bp->port.supported[idx] &= ~SUPPORTED_10baseT_Half; + + if (!(bp->link_params.speed_cap_mask[idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL)) + bp->port.supported[idx] &= ~SUPPORTED_10baseT_Full; + + if (!(bp->link_params.speed_cap_mask[idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)) + bp->port.supported[idx] &= ~SUPPORTED_100baseT_Half; + + if (!(bp->link_params.speed_cap_mask[idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL)) + bp->port.supported[idx] &= ~SUPPORTED_100baseT_Full; + + if (!(bp->link_params.speed_cap_mask[idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) + bp->port.supported[idx] &= ~(SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full); + + if (!(bp->link_params.speed_cap_mask[idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)) + bp->port.supported[idx] &= ~SUPPORTED_2500baseX_Full; + + if (!(bp->link_params.speed_cap_mask[idx] & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) + bp->port.supported[idx] &= ~SUPPORTED_10000baseT_Full; + + } + + BNX2X_DEV_INFO("supported 0x%x 0x%x\n", bp->port.supported[0], + bp->port.supported[1]); +} + +static void __devinit bnx2x_link_settings_requested(struct bnx2x *bp) +{ + u32 link_config, idx, cfg_size = 0; + bp->port.advertising[0] = 0; + bp->port.advertising[1] = 0; + switch (bp->link_params.num_phys) { + case 1: + case 2: + cfg_size = 1; + break; + case 3: + cfg_size = 2; + break; + } + for (idx = 0; idx < cfg_size; idx++) { + bp->link_params.req_duplex[idx] = DUPLEX_FULL; + link_config = bp->port.link_config[idx]; + switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) { + case PORT_FEATURE_LINK_SPEED_AUTO: + if (bp->port.supported[idx] & SUPPORTED_Autoneg) { + bp->link_params.req_line_speed[idx] = + SPEED_AUTO_NEG; + bp->port.advertising[idx] |= + bp->port.supported[idx]; + } else { + /* force 10G, no AN */ + bp->link_params.req_line_speed[idx] = + SPEED_10000; + bp->port.advertising[idx] |= + (ADVERTISED_10000baseT_Full | + ADVERTISED_FIBRE); + continue; + } + break; + + case PORT_FEATURE_LINK_SPEED_10M_FULL: + if (bp->port.supported[idx] & SUPPORTED_10baseT_Full) { + bp->link_params.req_line_speed[idx] = + SPEED_10; + bp->port.advertising[idx] |= + (ADVERTISED_10baseT_Full | + ADVERTISED_TP); + } else { + BNX2X_ERR("NVRAM config error. " + "Invalid link_config 0x%x" + " speed_cap_mask 0x%x\n", + link_config, + bp->link_params.speed_cap_mask[idx]); + return; + } + break; + + case PORT_FEATURE_LINK_SPEED_10M_HALF: + if (bp->port.supported[idx] & SUPPORTED_10baseT_Half) { + bp->link_params.req_line_speed[idx] = + SPEED_10; + bp->link_params.req_duplex[idx] = + DUPLEX_HALF; + bp->port.advertising[idx] |= + (ADVERTISED_10baseT_Half | + ADVERTISED_TP); + } else { + BNX2X_ERR("NVRAM config error. " + "Invalid link_config 0x%x" + " speed_cap_mask 0x%x\n", + link_config, + bp->link_params.speed_cap_mask[idx]); + return; + } + break; + + case PORT_FEATURE_LINK_SPEED_100M_FULL: + if (bp->port.supported[idx] & + SUPPORTED_100baseT_Full) { + bp->link_params.req_line_speed[idx] = + SPEED_100; + bp->port.advertising[idx] |= + (ADVERTISED_100baseT_Full | + ADVERTISED_TP); + } else { + BNX2X_ERR("NVRAM config error. " + "Invalid link_config 0x%x" + " speed_cap_mask 0x%x\n", + link_config, + bp->link_params.speed_cap_mask[idx]); + return; + } + break; + + case PORT_FEATURE_LINK_SPEED_100M_HALF: + if (bp->port.supported[idx] & + SUPPORTED_100baseT_Half) { + bp->link_params.req_line_speed[idx] = + SPEED_100; + bp->link_params.req_duplex[idx] = + DUPLEX_HALF; + bp->port.advertising[idx] |= + (ADVERTISED_100baseT_Half | + ADVERTISED_TP); + } else { + BNX2X_ERR("NVRAM config error. " + "Invalid link_config 0x%x" + " speed_cap_mask 0x%x\n", + link_config, + bp->link_params.speed_cap_mask[idx]); + return; + } + break; + + case PORT_FEATURE_LINK_SPEED_1G: + if (bp->port.supported[idx] & + SUPPORTED_1000baseT_Full) { + bp->link_params.req_line_speed[idx] = + SPEED_1000; + bp->port.advertising[idx] |= + (ADVERTISED_1000baseT_Full | + ADVERTISED_TP); + } else { + BNX2X_ERR("NVRAM config error. " + "Invalid link_config 0x%x" + " speed_cap_mask 0x%x\n", + link_config, + bp->link_params.speed_cap_mask[idx]); + return; + } + break; + + case PORT_FEATURE_LINK_SPEED_2_5G: + if (bp->port.supported[idx] & + SUPPORTED_2500baseX_Full) { + bp->link_params.req_line_speed[idx] = + SPEED_2500; + bp->port.advertising[idx] |= + (ADVERTISED_2500baseX_Full | + ADVERTISED_TP); + } else { + BNX2X_ERR("NVRAM config error. " + "Invalid link_config 0x%x" + " speed_cap_mask 0x%x\n", + link_config, + bp->link_params.speed_cap_mask[idx]); + return; + } + break; + + case PORT_FEATURE_LINK_SPEED_10G_CX4: + if (bp->port.supported[idx] & + SUPPORTED_10000baseT_Full) { + bp->link_params.req_line_speed[idx] = + SPEED_10000; + bp->port.advertising[idx] |= + (ADVERTISED_10000baseT_Full | + ADVERTISED_FIBRE); + } else { + BNX2X_ERR("NVRAM config error. " + "Invalid link_config 0x%x" + " speed_cap_mask 0x%x\n", + link_config, + bp->link_params.speed_cap_mask[idx]); + return; + } + break; + case PORT_FEATURE_LINK_SPEED_20G: + bp->link_params.req_line_speed[idx] = SPEED_20000; + + break; + default: + BNX2X_ERR("NVRAM config error. " + "BAD link speed link_config 0x%x\n", + link_config); + bp->link_params.req_line_speed[idx] = + SPEED_AUTO_NEG; + bp->port.advertising[idx] = + bp->port.supported[idx]; + break; + } + + bp->link_params.req_flow_ctrl[idx] = (link_config & + PORT_FEATURE_FLOW_CONTROL_MASK); + if ((bp->link_params.req_flow_ctrl[idx] == + BNX2X_FLOW_CTRL_AUTO) && + !(bp->port.supported[idx] & SUPPORTED_Autoneg)) { + bp->link_params.req_flow_ctrl[idx] = + BNX2X_FLOW_CTRL_NONE; + } + + BNX2X_DEV_INFO("req_line_speed %d req_duplex %d req_flow_ctrl" + " 0x%x advertising 0x%x\n", + bp->link_params.req_line_speed[idx], + bp->link_params.req_duplex[idx], + bp->link_params.req_flow_ctrl[idx], + bp->port.advertising[idx]); + } +} + +static void __devinit bnx2x_set_mac_buf(u8 *mac_buf, u32 mac_lo, u16 mac_hi) +{ + mac_hi = cpu_to_be16(mac_hi); + mac_lo = cpu_to_be32(mac_lo); + memcpy(mac_buf, &mac_hi, sizeof(mac_hi)); + memcpy(mac_buf + sizeof(mac_hi), &mac_lo, sizeof(mac_lo)); +} + +static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + u32 config; + u32 ext_phy_type, ext_phy_config; + + bp->link_params.bp = bp; + bp->link_params.port = port; + + bp->link_params.lane_config = + SHMEM_RD(bp, dev_info.port_hw_config[port].lane_config); + + bp->link_params.speed_cap_mask[0] = + SHMEM_RD(bp, + dev_info.port_hw_config[port].speed_capability_mask); + bp->link_params.speed_cap_mask[1] = + SHMEM_RD(bp, + dev_info.port_hw_config[port].speed_capability_mask2); + bp->port.link_config[0] = + SHMEM_RD(bp, dev_info.port_feature_config[port].link_config); + + bp->port.link_config[1] = + SHMEM_RD(bp, dev_info.port_feature_config[port].link_config2); + + bp->link_params.multi_phy_config = + SHMEM_RD(bp, dev_info.port_hw_config[port].multi_phy_config); + /* If the device is capable of WoL, set the default state according + * to the HW + */ + config = SHMEM_RD(bp, dev_info.port_feature_config[port].config); + bp->wol = (!(bp->flags & NO_WOL_FLAG) && + (config & PORT_FEATURE_WOL_ENABLED)); + + BNX2X_DEV_INFO("lane_config 0x%08x " + "speed_cap_mask0 0x%08x link_config0 0x%08x\n", + bp->link_params.lane_config, + bp->link_params.speed_cap_mask[0], + bp->port.link_config[0]); + + bp->link_params.switch_cfg = (bp->port.link_config[0] & + PORT_FEATURE_CONNECTED_SWITCH_MASK); + bnx2x_phy_probe(&bp->link_params); + bnx2x_link_settings_supported(bp, bp->link_params.switch_cfg); + + bnx2x_link_settings_requested(bp); + + /* + * If connected directly, work with the internal PHY, otherwise, work + * with the external PHY + */ + ext_phy_config = + SHMEM_RD(bp, + dev_info.port_hw_config[port].external_phy_config); + ext_phy_type = XGXS_EXT_PHY_TYPE(ext_phy_config); + if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) + bp->mdio.prtad = bp->port.phy_addr; + + else if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) && + (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)) + bp->mdio.prtad = + XGXS_EXT_PHY_ADDR(ext_phy_config); + + /* + * Check if hw lock is required to access MDC/MDIO bus to the PHY(s) + * In MF mode, it is set to cover self test cases + */ + if (IS_MF(bp)) + bp->port.need_hw_lock = 1; + else + bp->port.need_hw_lock = bnx2x_hw_lock_required(bp, + bp->common.shmem_base, + bp->common.shmem2_base); +} + +#ifdef BCM_CNIC +static void __devinit bnx2x_get_cnic_info(struct bnx2x *bp) +{ + int port = BP_PORT(bp); + int func = BP_ABS_FUNC(bp); + + u32 max_iscsi_conn = FW_ENCODE_32BIT_PATTERN ^ SHMEM_RD(bp, + drv_lic_key[port].max_iscsi_conn); + u32 max_fcoe_conn = FW_ENCODE_32BIT_PATTERN ^ SHMEM_RD(bp, + drv_lic_key[port].max_fcoe_conn); + + /* Get the number of maximum allowed iSCSI and FCoE connections */ + bp->cnic_eth_dev.max_iscsi_conn = + (max_iscsi_conn & BNX2X_MAX_ISCSI_INIT_CONN_MASK) >> + BNX2X_MAX_ISCSI_INIT_CONN_SHIFT; + + bp->cnic_eth_dev.max_fcoe_conn = + (max_fcoe_conn & BNX2X_MAX_FCOE_INIT_CONN_MASK) >> + BNX2X_MAX_FCOE_INIT_CONN_SHIFT; + + /* Read the WWN: */ + if (!IS_MF(bp)) { + /* Port info */ + bp->cnic_eth_dev.fcoe_wwn_port_name_hi = + SHMEM_RD(bp, + dev_info.port_hw_config[port]. + fcoe_wwn_port_name_upper); + bp->cnic_eth_dev.fcoe_wwn_port_name_lo = + SHMEM_RD(bp, + dev_info.port_hw_config[port]. + fcoe_wwn_port_name_lower); + + /* Node info */ + bp->cnic_eth_dev.fcoe_wwn_node_name_hi = + SHMEM_RD(bp, + dev_info.port_hw_config[port]. + fcoe_wwn_node_name_upper); + bp->cnic_eth_dev.fcoe_wwn_node_name_lo = + SHMEM_RD(bp, + dev_info.port_hw_config[port]. + fcoe_wwn_node_name_lower); + } else if (!IS_MF_SD(bp)) { + u32 cfg = MF_CFG_RD(bp, func_ext_config[func].func_cfg); + + /* + * Read the WWN info only if the FCoE feature is enabled for + * this function. + */ + if (cfg & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) { + /* Port info */ + bp->cnic_eth_dev.fcoe_wwn_port_name_hi = + MF_CFG_RD(bp, func_ext_config[func]. + fcoe_wwn_port_name_upper); + bp->cnic_eth_dev.fcoe_wwn_port_name_lo = + MF_CFG_RD(bp, func_ext_config[func]. + fcoe_wwn_port_name_lower); + + /* Node info */ + bp->cnic_eth_dev.fcoe_wwn_node_name_hi = + MF_CFG_RD(bp, func_ext_config[func]. + fcoe_wwn_node_name_upper); + bp->cnic_eth_dev.fcoe_wwn_node_name_lo = + MF_CFG_RD(bp, func_ext_config[func]. + fcoe_wwn_node_name_lower); + } + } + + BNX2X_DEV_INFO("max_iscsi_conn 0x%x max_fcoe_conn 0x%x\n", + bp->cnic_eth_dev.max_iscsi_conn, + bp->cnic_eth_dev.max_fcoe_conn); + + /* + * If maximum allowed number of connections is zero - + * disable the feature. + */ + if (!bp->cnic_eth_dev.max_iscsi_conn) + bp->flags |= NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG; + + if (!bp->cnic_eth_dev.max_fcoe_conn) + bp->flags |= NO_FCOE_FLAG; +} +#endif + +static void __devinit bnx2x_get_mac_hwinfo(struct bnx2x *bp) +{ + u32 val, val2; + int func = BP_ABS_FUNC(bp); + int port = BP_PORT(bp); +#ifdef BCM_CNIC + u8 *iscsi_mac = bp->cnic_eth_dev.iscsi_mac; + u8 *fip_mac = bp->fip_mac; +#endif + + /* Zero primary MAC configuration */ + memset(bp->dev->dev_addr, 0, ETH_ALEN); + + if (BP_NOMCP(bp)) { + BNX2X_ERROR("warning: random MAC workaround active\n"); + random_ether_addr(bp->dev->dev_addr); + } else if (IS_MF(bp)) { + val2 = MF_CFG_RD(bp, func_mf_config[func].mac_upper); + val = MF_CFG_RD(bp, func_mf_config[func].mac_lower); + if ((val2 != FUNC_MF_CFG_UPPERMAC_DEFAULT) && + (val != FUNC_MF_CFG_LOWERMAC_DEFAULT)) + bnx2x_set_mac_buf(bp->dev->dev_addr, val, val2); + +#ifdef BCM_CNIC + /* iSCSI and FCoE NPAR MACs: if there is no either iSCSI or + * FCoE MAC then the appropriate feature should be disabled. + */ + if (IS_MF_SI(bp)) { + u32 cfg = MF_CFG_RD(bp, func_ext_config[func].func_cfg); + if (cfg & MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD) { + val2 = MF_CFG_RD(bp, func_ext_config[func]. + iscsi_mac_addr_upper); + val = MF_CFG_RD(bp, func_ext_config[func]. + iscsi_mac_addr_lower); + bnx2x_set_mac_buf(iscsi_mac, val, val2); + BNX2X_DEV_INFO("Read iSCSI MAC: %pM\n", + iscsi_mac); + } else + bp->flags |= NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG; + + if (cfg & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) { + val2 = MF_CFG_RD(bp, func_ext_config[func]. + fcoe_mac_addr_upper); + val = MF_CFG_RD(bp, func_ext_config[func]. + fcoe_mac_addr_lower); + bnx2x_set_mac_buf(fip_mac, val, val2); + BNX2X_DEV_INFO("Read FCoE L2 MAC to %pM\n", + fip_mac); + + } else + bp->flags |= NO_FCOE_FLAG; + } +#endif + } else { + /* in SF read MACs from port configuration */ + val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_upper); + val = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_lower); + bnx2x_set_mac_buf(bp->dev->dev_addr, val, val2); + +#ifdef BCM_CNIC + val2 = SHMEM_RD(bp, dev_info.port_hw_config[port]. + iscsi_mac_upper); + val = SHMEM_RD(bp, dev_info.port_hw_config[port]. + iscsi_mac_lower); + bnx2x_set_mac_buf(iscsi_mac, val, val2); + + val2 = SHMEM_RD(bp, dev_info.port_hw_config[port]. + fcoe_fip_mac_upper); + val = SHMEM_RD(bp, dev_info.port_hw_config[port]. + fcoe_fip_mac_lower); + bnx2x_set_mac_buf(fip_mac, val, val2); +#endif + } + + memcpy(bp->link_params.mac_addr, bp->dev->dev_addr, ETH_ALEN); + memcpy(bp->dev->perm_addr, bp->dev->dev_addr, ETH_ALEN); + +#ifdef BCM_CNIC + /* Set the FCoE MAC in MF_SD mode */ + if (!CHIP_IS_E1x(bp) && IS_MF_SD(bp)) + memcpy(fip_mac, bp->dev->dev_addr, ETH_ALEN); + + /* Disable iSCSI if MAC configuration is + * invalid. + */ + if (!is_valid_ether_addr(iscsi_mac)) { + bp->flags |= NO_ISCSI_FLAG; + memset(iscsi_mac, 0, ETH_ALEN); + } + + /* Disable FCoE if MAC configuration is + * invalid. + */ + if (!is_valid_ether_addr(fip_mac)) { + bp->flags |= NO_FCOE_FLAG; + memset(bp->fip_mac, 0, ETH_ALEN); + } +#endif + + if (!is_valid_ether_addr(bp->dev->dev_addr)) + dev_err(&bp->pdev->dev, + "bad Ethernet MAC address configuration: " + "%pM, change it manually before bringing up " + "the appropriate network interface\n", + bp->dev->dev_addr); +} + +static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp) +{ + int /*abs*/func = BP_ABS_FUNC(bp); + int vn; + u32 val = 0; + int rc = 0; + + bnx2x_get_common_hwinfo(bp); + + /* + * initialize IGU parameters + */ + if (CHIP_IS_E1x(bp)) { + bp->common.int_block = INT_BLOCK_HC; + + bp->igu_dsb_id = DEF_SB_IGU_ID; + bp->igu_base_sb = 0; + } else { + bp->common.int_block = INT_BLOCK_IGU; + + /* do not allow device reset during IGU info preocessing */ + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET); + + val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION); + + if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) { + int tout = 5000; + + BNX2X_DEV_INFO("FORCING Normal Mode\n"); + + val &= ~(IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN); + REG_WR(bp, IGU_REG_BLOCK_CONFIGURATION, val); + REG_WR(bp, IGU_REG_RESET_MEMORIES, 0x7f); + + while (tout && REG_RD(bp, IGU_REG_RESET_MEMORIES)) { + tout--; + usleep_range(1000, 1000); + } + + if (REG_RD(bp, IGU_REG_RESET_MEMORIES)) { + dev_err(&bp->pdev->dev, + "FORCING Normal Mode failed!!!\n"); + return -EPERM; + } + } + + if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) { + BNX2X_DEV_INFO("IGU Backward Compatible Mode\n"); + bp->common.int_block |= INT_BLOCK_MODE_BW_COMP; + } else + BNX2X_DEV_INFO("IGU Normal Mode\n"); + + bnx2x_get_igu_cam_info(bp); + + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET); + } + + /* + * set base FW non-default (fast path) status block id, this value is + * used to initialize the fw_sb_id saved on the fp/queue structure to + * determine the id used by the FW. + */ + if (CHIP_IS_E1x(bp)) + bp->base_fw_ndsb = BP_PORT(bp) * FP_SB_MAX_E1x + BP_L_ID(bp); + else /* + * 57712 - we currently use one FW SB per IGU SB (Rx and Tx of + * the same queue are indicated on the same IGU SB). So we prefer + * FW and IGU SBs to be the same value. + */ + bp->base_fw_ndsb = bp->igu_base_sb; + + BNX2X_DEV_INFO("igu_dsb_id %d igu_base_sb %d igu_sb_cnt %d\n" + "base_fw_ndsb %d\n", bp->igu_dsb_id, bp->igu_base_sb, + bp->igu_sb_cnt, bp->base_fw_ndsb); + + /* + * Initialize MF configuration + */ + + bp->mf_ov = 0; + bp->mf_mode = 0; + vn = BP_VN(bp); + + if (!CHIP_IS_E1(bp) && !BP_NOMCP(bp)) { + BNX2X_DEV_INFO("shmem2base 0x%x, size %d, mfcfg offset %d\n", + bp->common.shmem2_base, SHMEM2_RD(bp, size), + (u32)offsetof(struct shmem2_region, mf_cfg_addr)); + + if (SHMEM2_HAS(bp, mf_cfg_addr)) + bp->common.mf_cfg_base = SHMEM2_RD(bp, mf_cfg_addr); + else + bp->common.mf_cfg_base = bp->common.shmem_base + + offsetof(struct shmem_region, func_mb) + + E1H_FUNC_MAX * sizeof(struct drv_func_mb); + /* + * get mf configuration: + * 1. existence of MF configuration + * 2. MAC address must be legal (check only upper bytes) + * for Switch-Independent mode; + * OVLAN must be legal for Switch-Dependent mode + * 3. SF_MODE configures specific MF mode + */ + if (bp->common.mf_cfg_base != SHMEM_MF_CFG_ADDR_NONE) { + /* get mf configuration */ + val = SHMEM_RD(bp, + dev_info.shared_feature_config.config); + val &= SHARED_FEAT_CFG_FORCE_SF_MODE_MASK; + + switch (val) { + case SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT: + val = MF_CFG_RD(bp, func_mf_config[func]. + mac_upper); + /* check for legal mac (upper bytes)*/ + if (val != 0xffff) { + bp->mf_mode = MULTI_FUNCTION_SI; + bp->mf_config[vn] = MF_CFG_RD(bp, + func_mf_config[func].config); + } else + BNX2X_DEV_INFO("illegal MAC address " + "for SI\n"); + break; + case SHARED_FEAT_CFG_FORCE_SF_MODE_MF_ALLOWED: + /* get OV configuration */ + val = MF_CFG_RD(bp, + func_mf_config[FUNC_0].e1hov_tag); + val &= FUNC_MF_CFG_E1HOV_TAG_MASK; + + if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) { + bp->mf_mode = MULTI_FUNCTION_SD; + bp->mf_config[vn] = MF_CFG_RD(bp, + func_mf_config[func].config); + } else + BNX2X_DEV_INFO("illegal OV for SD\n"); + break; + default: + /* Unknown configuration: reset mf_config */ + bp->mf_config[vn] = 0; + BNX2X_DEV_INFO("unkown MF mode 0x%x\n", val); + } + } + + BNX2X_DEV_INFO("%s function mode\n", + IS_MF(bp) ? "multi" : "single"); + + switch (bp->mf_mode) { + case MULTI_FUNCTION_SD: + val = MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) & + FUNC_MF_CFG_E1HOV_TAG_MASK; + if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) { + bp->mf_ov = val; + bp->path_has_ovlan = true; + + BNX2X_DEV_INFO("MF OV for func %d is %d " + "(0x%04x)\n", func, bp->mf_ov, + bp->mf_ov); + } else { + dev_err(&bp->pdev->dev, + "No valid MF OV for func %d, " + "aborting\n", func); + return -EPERM; + } + break; + case MULTI_FUNCTION_SI: + BNX2X_DEV_INFO("func %d is in MF " + "switch-independent mode\n", func); + break; + default: + if (vn) { + dev_err(&bp->pdev->dev, + "VN %d is in a single function mode, " + "aborting\n", vn); + return -EPERM; + } + break; + } + + /* check if other port on the path needs ovlan: + * Since MF configuration is shared between ports + * Possible mixed modes are only + * {SF, SI} {SF, SD} {SD, SF} {SI, SF} + */ + if (CHIP_MODE_IS_4_PORT(bp) && + !bp->path_has_ovlan && + !IS_MF(bp) && + bp->common.mf_cfg_base != SHMEM_MF_CFG_ADDR_NONE) { + u8 other_port = !BP_PORT(bp); + u8 other_func = BP_PATH(bp) + 2*other_port; + val = MF_CFG_RD(bp, + func_mf_config[other_func].e1hov_tag); + if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) + bp->path_has_ovlan = true; + } + } + + /* adjust igu_sb_cnt to MF for E1x */ + if (CHIP_IS_E1x(bp) && IS_MF(bp)) + bp->igu_sb_cnt /= E1HVN_MAX; + + /* port info */ + bnx2x_get_port_hwinfo(bp); + + /* Get MAC addresses */ + bnx2x_get_mac_hwinfo(bp); + +#ifdef BCM_CNIC + bnx2x_get_cnic_info(bp); +#endif + + /* Get current FW pulse sequence */ + if (!BP_NOMCP(bp)) { + int mb_idx = BP_FW_MB_IDX(bp); + + bp->fw_drv_pulse_wr_seq = + (SHMEM_RD(bp, func_mb[mb_idx].drv_pulse_mb) & + DRV_PULSE_SEQ_MASK); + BNX2X_DEV_INFO("drv_pulse 0x%x\n", bp->fw_drv_pulse_wr_seq); + } + + return rc; +} + +static void __devinit bnx2x_read_fwinfo(struct bnx2x *bp) +{ + int cnt, i, block_end, rodi; + char vpd_data[BNX2X_VPD_LEN+1]; + char str_id_reg[VENDOR_ID_LEN+1]; + char str_id_cap[VENDOR_ID_LEN+1]; + u8 len; + + cnt = pci_read_vpd(bp->pdev, 0, BNX2X_VPD_LEN, vpd_data); + memset(bp->fw_ver, 0, sizeof(bp->fw_ver)); + + if (cnt < BNX2X_VPD_LEN) + goto out_not_found; + + i = pci_vpd_find_tag(vpd_data, 0, BNX2X_VPD_LEN, + PCI_VPD_LRDT_RO_DATA); + if (i < 0) + goto out_not_found; + + + block_end = i + PCI_VPD_LRDT_TAG_SIZE + + pci_vpd_lrdt_size(&vpd_data[i]); + + i += PCI_VPD_LRDT_TAG_SIZE; + + if (block_end > BNX2X_VPD_LEN) + goto out_not_found; + + rodi = pci_vpd_find_info_keyword(vpd_data, i, block_end, + PCI_VPD_RO_KEYWORD_MFR_ID); + if (rodi < 0) + goto out_not_found; + + len = pci_vpd_info_field_size(&vpd_data[rodi]); + + if (len != VENDOR_ID_LEN) + goto out_not_found; + + rodi += PCI_VPD_INFO_FLD_HDR_SIZE; + + /* vendor specific info */ + snprintf(str_id_reg, VENDOR_ID_LEN + 1, "%04x", PCI_VENDOR_ID_DELL); + snprintf(str_id_cap, VENDOR_ID_LEN + 1, "%04X", PCI_VENDOR_ID_DELL); + if (!strncmp(str_id_reg, &vpd_data[rodi], VENDOR_ID_LEN) || + !strncmp(str_id_cap, &vpd_data[rodi], VENDOR_ID_LEN)) { + + rodi = pci_vpd_find_info_keyword(vpd_data, i, block_end, + PCI_VPD_RO_KEYWORD_VENDOR0); + if (rodi >= 0) { + len = pci_vpd_info_field_size(&vpd_data[rodi]); + + rodi += PCI_VPD_INFO_FLD_HDR_SIZE; + + if (len < 32 && (len + rodi) <= BNX2X_VPD_LEN) { + memcpy(bp->fw_ver, &vpd_data[rodi], len); + bp->fw_ver[len] = ' '; + } + } + return; + } +out_not_found: + return; +} + +static void __devinit bnx2x_set_modes_bitmap(struct bnx2x *bp) +{ + u32 flags = 0; + + if (CHIP_REV_IS_FPGA(bp)) + SET_FLAGS(flags, MODE_FPGA); + else if (CHIP_REV_IS_EMUL(bp)) + SET_FLAGS(flags, MODE_EMUL); + else + SET_FLAGS(flags, MODE_ASIC); + + if (CHIP_MODE_IS_4_PORT(bp)) + SET_FLAGS(flags, MODE_PORT4); + else + SET_FLAGS(flags, MODE_PORT2); + + if (CHIP_IS_E2(bp)) + SET_FLAGS(flags, MODE_E2); + else if (CHIP_IS_E3(bp)) { + SET_FLAGS(flags, MODE_E3); + if (CHIP_REV(bp) == CHIP_REV_Ax) + SET_FLAGS(flags, MODE_E3_A0); + else /*if (CHIP_REV(bp) == CHIP_REV_Bx)*/ + SET_FLAGS(flags, MODE_E3_B0 | MODE_COS3); + } + + if (IS_MF(bp)) { + SET_FLAGS(flags, MODE_MF); + switch (bp->mf_mode) { + case MULTI_FUNCTION_SD: + SET_FLAGS(flags, MODE_MF_SD); + break; + case MULTI_FUNCTION_SI: + SET_FLAGS(flags, MODE_MF_SI); + break; + } + } else + SET_FLAGS(flags, MODE_SF); + +#if defined(__LITTLE_ENDIAN) + SET_FLAGS(flags, MODE_LITTLE_ENDIAN); +#else /*(__BIG_ENDIAN)*/ + SET_FLAGS(flags, MODE_BIG_ENDIAN); +#endif + INIT_MODE_FLAGS(bp) = flags; +} + +static int __devinit bnx2x_init_bp(struct bnx2x *bp) +{ + int func; + int timer_interval; + int rc; + + mutex_init(&bp->port.phy_mutex); + mutex_init(&bp->fw_mb_mutex); + spin_lock_init(&bp->stats_lock); +#ifdef BCM_CNIC + mutex_init(&bp->cnic_mutex); +#endif + + INIT_DELAYED_WORK(&bp->sp_task, bnx2x_sp_task); + INIT_DELAYED_WORK(&bp->sp_rtnl_task, bnx2x_sp_rtnl_task); + INIT_DELAYED_WORK(&bp->period_task, bnx2x_period_task); + rc = bnx2x_get_hwinfo(bp); + if (rc) + return rc; + + bnx2x_set_modes_bitmap(bp); + + rc = bnx2x_alloc_mem_bp(bp); + if (rc) + return rc; + + bnx2x_read_fwinfo(bp); + + func = BP_FUNC(bp); + + /* need to reset chip if undi was active */ + if (!BP_NOMCP(bp)) + bnx2x_undi_unload(bp); + + /* init fw_seq after undi_unload! */ + if (!BP_NOMCP(bp)) { + bp->fw_seq = + (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) & + DRV_MSG_SEQ_NUMBER_MASK); + BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq); + } + + if (CHIP_REV_IS_FPGA(bp)) + dev_err(&bp->pdev->dev, "FPGA detected\n"); + + if (BP_NOMCP(bp) && (func == 0)) + dev_err(&bp->pdev->dev, "MCP disabled, " + "must load devices in order!\n"); + + bp->multi_mode = multi_mode; + + /* Set TPA flags */ + if (disable_tpa) { + bp->flags &= ~TPA_ENABLE_FLAG; + bp->dev->features &= ~NETIF_F_LRO; + } else { + bp->flags |= TPA_ENABLE_FLAG; + bp->dev->features |= NETIF_F_LRO; + } + bp->disable_tpa = disable_tpa; + + if (CHIP_IS_E1(bp)) + bp->dropless_fc = 0; + else + bp->dropless_fc = dropless_fc; + + bp->mrrs = mrrs; + + bp->tx_ring_size = MAX_TX_AVAIL; + + /* make sure that the numbers are in the right granularity */ + bp->tx_ticks = (50 / BNX2X_BTR) * BNX2X_BTR; + bp->rx_ticks = (25 / BNX2X_BTR) * BNX2X_BTR; + + timer_interval = (CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ); + bp->current_interval = (poll ? poll : timer_interval); + + init_timer(&bp->timer); + bp->timer.expires = jiffies + bp->current_interval; + bp->timer.data = (unsigned long) bp; + bp->timer.function = bnx2x_timer; + + bnx2x_dcbx_set_state(bp, true, BNX2X_DCBX_ENABLED_ON_NEG_ON); + bnx2x_dcbx_init_params(bp); + +#ifdef BCM_CNIC + if (CHIP_IS_E1x(bp)) + bp->cnic_base_cl_id = FP_SB_MAX_E1x; + else + bp->cnic_base_cl_id = FP_SB_MAX_E2; +#endif + + /* multiple tx priority */ + if (CHIP_IS_E1x(bp)) + bp->max_cos = BNX2X_MULTI_TX_COS_E1X; + if (CHIP_IS_E2(bp) || CHIP_IS_E3A0(bp)) + bp->max_cos = BNX2X_MULTI_TX_COS_E2_E3A0; + if (CHIP_IS_E3B0(bp)) + bp->max_cos = BNX2X_MULTI_TX_COS_E3B0; + + return rc; +} + + +/**************************************************************************** +* General service functions +****************************************************************************/ + +/* + * net_device service functions + */ + +/* called with rtnl_lock */ +static int bnx2x_open(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + bool global = false; + int other_engine = BP_PATH(bp) ? 0 : 1; + u32 other_load_counter, load_counter; + + netif_carrier_off(dev); + + bnx2x_set_power_state(bp, PCI_D0); + + other_load_counter = bnx2x_get_load_cnt(bp, other_engine); + load_counter = bnx2x_get_load_cnt(bp, BP_PATH(bp)); + + /* + * If parity had happen during the unload, then attentions + * and/or RECOVERY_IN_PROGRES may still be set. In this case we + * want the first function loaded on the current engine to + * complete the recovery. + */ + if (!bnx2x_reset_is_done(bp, BP_PATH(bp)) || + bnx2x_chk_parity_attn(bp, &global, true)) + do { + /* + * If there are attentions and they are in a global + * blocks, set the GLOBAL_RESET bit regardless whether + * it will be this function that will complete the + * recovery or not. + */ + if (global) + bnx2x_set_reset_global(bp); + + /* + * Only the first function on the current engine should + * try to recover in open. In case of attentions in + * global blocks only the first in the chip should try + * to recover. + */ + if ((!load_counter && + (!global || !other_load_counter)) && + bnx2x_trylock_leader_lock(bp) && + !bnx2x_leader_reset(bp)) { + netdev_info(bp->dev, "Recovered in open\n"); + break; + } + + /* recovery has failed... */ + bnx2x_set_power_state(bp, PCI_D3hot); + bp->recovery_state = BNX2X_RECOVERY_FAILED; + + netdev_err(bp->dev, "Recovery flow hasn't been properly" + " completed yet. Try again later. If u still see this" + " message after a few retries then power cycle is" + " required.\n"); + + return -EAGAIN; + } while (0); + + bp->recovery_state = BNX2X_RECOVERY_DONE; + return bnx2x_nic_load(bp, LOAD_OPEN); +} + +/* called with rtnl_lock */ +static int bnx2x_close(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + + /* Unload the driver, release IRQs */ + bnx2x_nic_unload(bp, UNLOAD_CLOSE); + + /* Power off */ + bnx2x_set_power_state(bp, PCI_D3hot); + + return 0; +} + +static inline int bnx2x_init_mcast_macs_list(struct bnx2x *bp, + struct bnx2x_mcast_ramrod_params *p) +{ + int mc_count = netdev_mc_count(bp->dev); + struct bnx2x_mcast_list_elem *mc_mac = + kzalloc(sizeof(*mc_mac) * mc_count, GFP_ATOMIC); + struct netdev_hw_addr *ha; + + if (!mc_mac) + return -ENOMEM; + + INIT_LIST_HEAD(&p->mcast_list); + + netdev_for_each_mc_addr(ha, bp->dev) { + mc_mac->mac = bnx2x_mc_addr(ha); + list_add_tail(&mc_mac->link, &p->mcast_list); + mc_mac++; + } + + p->mcast_list_len = mc_count; + + return 0; +} + +static inline void bnx2x_free_mcast_macs_list( + struct bnx2x_mcast_ramrod_params *p) +{ + struct bnx2x_mcast_list_elem *mc_mac = + list_first_entry(&p->mcast_list, struct bnx2x_mcast_list_elem, + link); + + WARN_ON(!mc_mac); + kfree(mc_mac); +} + +/** + * bnx2x_set_uc_list - configure a new unicast MACs list. + * + * @bp: driver handle + * + * We will use zero (0) as a MAC type for these MACs. + */ +static inline int bnx2x_set_uc_list(struct bnx2x *bp) +{ + int rc; + struct net_device *dev = bp->dev; + struct netdev_hw_addr *ha; + struct bnx2x_vlan_mac_obj *mac_obj = &bp->fp->mac_obj; + unsigned long ramrod_flags = 0; + + /* First schedule a cleanup up of old configuration */ + rc = bnx2x_del_all_macs(bp, mac_obj, BNX2X_UC_LIST_MAC, false); + if (rc < 0) { + BNX2X_ERR("Failed to schedule DELETE operations: %d\n", rc); + return rc; + } + + netdev_for_each_uc_addr(ha, dev) { + rc = bnx2x_set_mac_one(bp, bnx2x_uc_addr(ha), mac_obj, true, + BNX2X_UC_LIST_MAC, &ramrod_flags); + if (rc < 0) { + BNX2X_ERR("Failed to schedule ADD operations: %d\n", + rc); + return rc; + } + } + + /* Execute the pending commands */ + __set_bit(RAMROD_CONT, &ramrod_flags); + return bnx2x_set_mac_one(bp, NULL, mac_obj, false /* don't care */, + BNX2X_UC_LIST_MAC, &ramrod_flags); +} + +static inline int bnx2x_set_mc_list(struct bnx2x *bp) +{ + struct net_device *dev = bp->dev; + struct bnx2x_mcast_ramrod_params rparam = {0}; + int rc = 0; + + rparam.mcast_obj = &bp->mcast_obj; + + /* first, clear all configured multicast MACs */ + rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL); + if (rc < 0) { + BNX2X_ERR("Failed to clear multicast " + "configuration: %d\n", rc); + return rc; + } + + /* then, configure a new MACs list */ + if (netdev_mc_count(dev)) { + rc = bnx2x_init_mcast_macs_list(bp, &rparam); + if (rc) { + BNX2X_ERR("Failed to create multicast MACs " + "list: %d\n", rc); + return rc; + } + + /* Now add the new MACs */ + rc = bnx2x_config_mcast(bp, &rparam, + BNX2X_MCAST_CMD_ADD); + if (rc < 0) + BNX2X_ERR("Failed to set a new multicast " + "configuration: %d\n", rc); + + bnx2x_free_mcast_macs_list(&rparam); + } + + return rc; +} + + +/* If bp->state is OPEN, should be called with netif_addr_lock_bh() */ +void bnx2x_set_rx_mode(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + u32 rx_mode = BNX2X_RX_MODE_NORMAL; + + if (bp->state != BNX2X_STATE_OPEN) { + DP(NETIF_MSG_IFUP, "state is %x, returning\n", bp->state); + return; + } + + DP(NETIF_MSG_IFUP, "dev->flags = %x\n", bp->dev->flags); + + if (dev->flags & IFF_PROMISC) + rx_mode = BNX2X_RX_MODE_PROMISC; + else if ((dev->flags & IFF_ALLMULTI) || + ((netdev_mc_count(dev) > BNX2X_MAX_MULTICAST) && + CHIP_IS_E1(bp))) + rx_mode = BNX2X_RX_MODE_ALLMULTI; + else { + /* some multicasts */ + if (bnx2x_set_mc_list(bp) < 0) + rx_mode = BNX2X_RX_MODE_ALLMULTI; + + if (bnx2x_set_uc_list(bp) < 0) + rx_mode = BNX2X_RX_MODE_PROMISC; + } + + bp->rx_mode = rx_mode; + + /* Schedule the rx_mode command */ + if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state)) { + set_bit(BNX2X_FILTER_RX_MODE_SCHED, &bp->sp_state); + return; + } + + bnx2x_set_storm_rx_mode(bp); +} + +/* called with rtnl_lock */ +static int bnx2x_mdio_read(struct net_device *netdev, int prtad, + int devad, u16 addr) +{ + struct bnx2x *bp = netdev_priv(netdev); + u16 value; + int rc; + + DP(NETIF_MSG_LINK, "mdio_read: prtad 0x%x, devad 0x%x, addr 0x%x\n", + prtad, devad, addr); + + /* The HW expects different devad if CL22 is used */ + devad = (devad == MDIO_DEVAD_NONE) ? DEFAULT_PHY_DEV_ADDR : devad; + + bnx2x_acquire_phy_lock(bp); + rc = bnx2x_phy_read(&bp->link_params, prtad, devad, addr, &value); + bnx2x_release_phy_lock(bp); + DP(NETIF_MSG_LINK, "mdio_read_val 0x%x rc = 0x%x\n", value, rc); + + if (!rc) + rc = value; + return rc; +} + +/* called with rtnl_lock */ +static int bnx2x_mdio_write(struct net_device *netdev, int prtad, int devad, + u16 addr, u16 value) +{ + struct bnx2x *bp = netdev_priv(netdev); + int rc; + + DP(NETIF_MSG_LINK, "mdio_write: prtad 0x%x, devad 0x%x, addr 0x%x," + " value 0x%x\n", prtad, devad, addr, value); + + /* The HW expects different devad if CL22 is used */ + devad = (devad == MDIO_DEVAD_NONE) ? DEFAULT_PHY_DEV_ADDR : devad; + + bnx2x_acquire_phy_lock(bp); + rc = bnx2x_phy_write(&bp->link_params, prtad, devad, addr, value); + bnx2x_release_phy_lock(bp); + return rc; +} + +/* called with rtnl_lock */ +static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct bnx2x *bp = netdev_priv(dev); + struct mii_ioctl_data *mdio = if_mii(ifr); + + DP(NETIF_MSG_LINK, "ioctl: phy id 0x%x, reg 0x%x, val_in 0x%x\n", + mdio->phy_id, mdio->reg_num, mdio->val_in); + + if (!netif_running(dev)) + return -EAGAIN; + + return mdio_mii_ioctl(&bp->mdio, mdio, cmd); +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void poll_bnx2x(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + + disable_irq(bp->pdev->irq); + bnx2x_interrupt(bp->pdev->irq, dev); + enable_irq(bp->pdev->irq); +} +#endif + +static const struct net_device_ops bnx2x_netdev_ops = { + .ndo_open = bnx2x_open, + .ndo_stop = bnx2x_close, + .ndo_start_xmit = bnx2x_start_xmit, + .ndo_select_queue = bnx2x_select_queue, + .ndo_set_rx_mode = bnx2x_set_rx_mode, + .ndo_set_mac_address = bnx2x_change_mac_addr, + .ndo_validate_addr = eth_validate_addr, + .ndo_do_ioctl = bnx2x_ioctl, + .ndo_change_mtu = bnx2x_change_mtu, + .ndo_fix_features = bnx2x_fix_features, + .ndo_set_features = bnx2x_set_features, + .ndo_tx_timeout = bnx2x_tx_timeout, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = poll_bnx2x, +#endif + .ndo_setup_tc = bnx2x_setup_tc, + +#if defined(NETDEV_FCOE_WWNN) && defined(BCM_CNIC) + .ndo_fcoe_get_wwn = bnx2x_fcoe_get_wwn, +#endif +}; + +static inline int bnx2x_set_coherency_mask(struct bnx2x *bp) +{ + struct device *dev = &bp->pdev->dev; + + if (dma_set_mask(dev, DMA_BIT_MASK(64)) == 0) { + bp->flags |= USING_DAC_FLAG; + if (dma_set_coherent_mask(dev, DMA_BIT_MASK(64)) != 0) { + dev_err(dev, "dma_set_coherent_mask failed, " + "aborting\n"); + return -EIO; + } + } else if (dma_set_mask(dev, DMA_BIT_MASK(32)) != 0) { + dev_err(dev, "System does not support DMA, aborting\n"); + return -EIO; + } + + return 0; +} + +static int __devinit bnx2x_init_dev(struct pci_dev *pdev, + struct net_device *dev, + unsigned long board_type) +{ + struct bnx2x *bp; + int rc; + + SET_NETDEV_DEV(dev, &pdev->dev); + bp = netdev_priv(dev); + + bp->dev = dev; + bp->pdev = pdev; + bp->flags = 0; + bp->pf_num = PCI_FUNC(pdev->devfn); + + rc = pci_enable_device(pdev); + if (rc) { + dev_err(&bp->pdev->dev, + "Cannot enable PCI device, aborting\n"); + goto err_out; + } + + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { + dev_err(&bp->pdev->dev, + "Cannot find PCI device base address, aborting\n"); + rc = -ENODEV; + goto err_out_disable; + } + + if (!(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) { + dev_err(&bp->pdev->dev, "Cannot find second PCI device" + " base address, aborting\n"); + rc = -ENODEV; + goto err_out_disable; + } + + if (atomic_read(&pdev->enable_cnt) == 1) { + rc = pci_request_regions(pdev, DRV_MODULE_NAME); + if (rc) { + dev_err(&bp->pdev->dev, + "Cannot obtain PCI resources, aborting\n"); + goto err_out_disable; + } + + pci_set_master(pdev); + pci_save_state(pdev); + } + + bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM); + if (bp->pm_cap == 0) { + dev_err(&bp->pdev->dev, + "Cannot find power management capability, aborting\n"); + rc = -EIO; + goto err_out_release; + } + + if (!pci_is_pcie(pdev)) { + dev_err(&bp->pdev->dev, "Not PCI Express, aborting\n"); + rc = -EIO; + goto err_out_release; + } + + rc = bnx2x_set_coherency_mask(bp); + if (rc) + goto err_out_release; + + dev->mem_start = pci_resource_start(pdev, 0); + dev->base_addr = dev->mem_start; + dev->mem_end = pci_resource_end(pdev, 0); + + dev->irq = pdev->irq; + + bp->regview = pci_ioremap_bar(pdev, 0); + if (!bp->regview) { + dev_err(&bp->pdev->dev, + "Cannot map register space, aborting\n"); + rc = -ENOMEM; + goto err_out_release; + } + + bnx2x_set_power_state(bp, PCI_D0); + + /* clean indirect addresses */ + pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, + PCICFG_VENDOR_ID_OFFSET); + /* + * Clean the following indirect addresses for all functions since it + * is not used by the driver. + */ + REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0); + + if (CHIP_IS_E1x(bp)) { + REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0); + } + + /* + * Enable internal target-read (in case we are probed after PF FLR). + * Must be done prior to any BAR read access. Only for 57712 and up + */ + if (board_type != BCM57710 && + board_type != BCM57711 && + board_type != BCM57711E) + REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1); + + /* Reset the load counter */ + bnx2x_clear_load_cnt(bp); + + dev->watchdog_timeo = TX_TIMEOUT; + + dev->netdev_ops = &bnx2x_netdev_ops; + bnx2x_set_ethtool_ops(dev); + + dev->priv_flags |= IFF_UNICAST_FLT; + + dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | + NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_LRO | + NETIF_F_RXCSUM | NETIF_F_RXHASH | NETIF_F_HW_VLAN_TX; + + dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | + NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_HIGHDMA; + + dev->features |= dev->hw_features | NETIF_F_HW_VLAN_RX; + if (bp->flags & USING_DAC_FLAG) + dev->features |= NETIF_F_HIGHDMA; + + /* Add Loopback capability to the device */ + dev->hw_features |= NETIF_F_LOOPBACK; + +#ifdef BCM_DCBNL + dev->dcbnl_ops = &bnx2x_dcbnl_ops; +#endif + + /* get_port_hwinfo() will set prtad and mmds properly */ + bp->mdio.prtad = MDIO_PRTAD_NONE; + bp->mdio.mmds = 0; + bp->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; + bp->mdio.dev = dev; + bp->mdio.mdio_read = bnx2x_mdio_read; + bp->mdio.mdio_write = bnx2x_mdio_write; + + return 0; + +err_out_release: + if (atomic_read(&pdev->enable_cnt) == 1) + pci_release_regions(pdev); + +err_out_disable: + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + +err_out: + return rc; +} + +static void __devinit bnx2x_get_pcie_width_speed(struct bnx2x *bp, + int *width, int *speed) +{ + u32 val = REG_RD(bp, PCICFG_OFFSET + PCICFG_LINK_CONTROL); + + *width = (val & PCICFG_LINK_WIDTH) >> PCICFG_LINK_WIDTH_SHIFT; + + /* return value of 1=2.5GHz 2=5GHz */ + *speed = (val & PCICFG_LINK_SPEED) >> PCICFG_LINK_SPEED_SHIFT; +} + +static int bnx2x_check_firmware(struct bnx2x *bp) +{ + const struct firmware *firmware = bp->firmware; + struct bnx2x_fw_file_hdr *fw_hdr; + struct bnx2x_fw_file_section *sections; + u32 offset, len, num_ops; + u16 *ops_offsets; + int i; + const u8 *fw_ver; + + if (firmware->size < sizeof(struct bnx2x_fw_file_hdr)) + return -EINVAL; + + fw_hdr = (struct bnx2x_fw_file_hdr *)firmware->data; + sections = (struct bnx2x_fw_file_section *)fw_hdr; + + /* Make sure none of the offsets and sizes make us read beyond + * the end of the firmware data */ + for (i = 0; i < sizeof(*fw_hdr) / sizeof(*sections); i++) { + offset = be32_to_cpu(sections[i].offset); + len = be32_to_cpu(sections[i].len); + if (offset + len > firmware->size) { + dev_err(&bp->pdev->dev, + "Section %d length is out of bounds\n", i); + return -EINVAL; + } + } + + /* Likewise for the init_ops offsets */ + offset = be32_to_cpu(fw_hdr->init_ops_offsets.offset); + ops_offsets = (u16 *)(firmware->data + offset); + num_ops = be32_to_cpu(fw_hdr->init_ops.len) / sizeof(struct raw_op); + + for (i = 0; i < be32_to_cpu(fw_hdr->init_ops_offsets.len) / 2; i++) { + if (be16_to_cpu(ops_offsets[i]) > num_ops) { + dev_err(&bp->pdev->dev, + "Section offset %d is out of bounds\n", i); + return -EINVAL; + } + } + + /* Check FW version */ + offset = be32_to_cpu(fw_hdr->fw_version.offset); + fw_ver = firmware->data + offset; + if ((fw_ver[0] != BCM_5710_FW_MAJOR_VERSION) || + (fw_ver[1] != BCM_5710_FW_MINOR_VERSION) || + (fw_ver[2] != BCM_5710_FW_REVISION_VERSION) || + (fw_ver[3] != BCM_5710_FW_ENGINEERING_VERSION)) { + dev_err(&bp->pdev->dev, + "Bad FW version:%d.%d.%d.%d. Should be %d.%d.%d.%d\n", + fw_ver[0], fw_ver[1], fw_ver[2], + fw_ver[3], BCM_5710_FW_MAJOR_VERSION, + BCM_5710_FW_MINOR_VERSION, + BCM_5710_FW_REVISION_VERSION, + BCM_5710_FW_ENGINEERING_VERSION); + return -EINVAL; + } + + return 0; +} + +static inline void be32_to_cpu_n(const u8 *_source, u8 *_target, u32 n) +{ + const __be32 *source = (const __be32 *)_source; + u32 *target = (u32 *)_target; + u32 i; + + for (i = 0; i < n/4; i++) + target[i] = be32_to_cpu(source[i]); +} + +/* + Ops array is stored in the following format: + {op(8bit), offset(24bit, big endian), data(32bit, big endian)} + */ +static inline void bnx2x_prep_ops(const u8 *_source, u8 *_target, u32 n) +{ + const __be32 *source = (const __be32 *)_source; + struct raw_op *target = (struct raw_op *)_target; + u32 i, j, tmp; + + for (i = 0, j = 0; i < n/8; i++, j += 2) { + tmp = be32_to_cpu(source[j]); + target[i].op = (tmp >> 24) & 0xff; + target[i].offset = tmp & 0xffffff; + target[i].raw_data = be32_to_cpu(source[j + 1]); + } +} + +/** + * IRO array is stored in the following format: + * {base(24bit), m1(16bit), m2(16bit), m3(16bit), size(16bit) } + */ +static inline void bnx2x_prep_iro(const u8 *_source, u8 *_target, u32 n) +{ + const __be32 *source = (const __be32 *)_source; + struct iro *target = (struct iro *)_target; + u32 i, j, tmp; + + for (i = 0, j = 0; i < n/sizeof(struct iro); i++) { + target[i].base = be32_to_cpu(source[j]); + j++; + tmp = be32_to_cpu(source[j]); + target[i].m1 = (tmp >> 16) & 0xffff; + target[i].m2 = tmp & 0xffff; + j++; + tmp = be32_to_cpu(source[j]); + target[i].m3 = (tmp >> 16) & 0xffff; + target[i].size = tmp & 0xffff; + j++; + } +} + +static inline void be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n) +{ + const __be16 *source = (const __be16 *)_source; + u16 *target = (u16 *)_target; + u32 i; + + for (i = 0; i < n/2; i++) + target[i] = be16_to_cpu(source[i]); +} + +#define BNX2X_ALLOC_AND_SET(arr, lbl, func) \ +do { \ + u32 len = be32_to_cpu(fw_hdr->arr.len); \ + bp->arr = kmalloc(len, GFP_KERNEL); \ + if (!bp->arr) { \ + pr_err("Failed to allocate %d bytes for "#arr"\n", len); \ + goto lbl; \ + } \ + func(bp->firmware->data + be32_to_cpu(fw_hdr->arr.offset), \ + (u8 *)bp->arr, len); \ +} while (0) + +int bnx2x_init_firmware(struct bnx2x *bp) +{ + const char *fw_file_name; + struct bnx2x_fw_file_hdr *fw_hdr; + int rc; + + if (CHIP_IS_E1(bp)) + fw_file_name = FW_FILE_NAME_E1; + else if (CHIP_IS_E1H(bp)) + fw_file_name = FW_FILE_NAME_E1H; + else if (!CHIP_IS_E1x(bp)) + fw_file_name = FW_FILE_NAME_E2; + else { + BNX2X_ERR("Unsupported chip revision\n"); + return -EINVAL; + } + + BNX2X_DEV_INFO("Loading %s\n", fw_file_name); + + rc = request_firmware(&bp->firmware, fw_file_name, &bp->pdev->dev); + if (rc) { + BNX2X_ERR("Can't load firmware file %s\n", fw_file_name); + goto request_firmware_exit; + } + + rc = bnx2x_check_firmware(bp); + if (rc) { + BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name); + goto request_firmware_exit; + } + + fw_hdr = (struct bnx2x_fw_file_hdr *)bp->firmware->data; + + /* Initialize the pointers to the init arrays */ + /* Blob */ + BNX2X_ALLOC_AND_SET(init_data, request_firmware_exit, be32_to_cpu_n); + + /* Opcodes */ + BNX2X_ALLOC_AND_SET(init_ops, init_ops_alloc_err, bnx2x_prep_ops); + + /* Offsets */ + BNX2X_ALLOC_AND_SET(init_ops_offsets, init_offsets_alloc_err, + be16_to_cpu_n); + + /* STORMs firmware */ + INIT_TSEM_INT_TABLE_DATA(bp) = bp->firmware->data + + be32_to_cpu(fw_hdr->tsem_int_table_data.offset); + INIT_TSEM_PRAM_DATA(bp) = bp->firmware->data + + be32_to_cpu(fw_hdr->tsem_pram_data.offset); + INIT_USEM_INT_TABLE_DATA(bp) = bp->firmware->data + + be32_to_cpu(fw_hdr->usem_int_table_data.offset); + INIT_USEM_PRAM_DATA(bp) = bp->firmware->data + + be32_to_cpu(fw_hdr->usem_pram_data.offset); + INIT_XSEM_INT_TABLE_DATA(bp) = bp->firmware->data + + be32_to_cpu(fw_hdr->xsem_int_table_data.offset); + INIT_XSEM_PRAM_DATA(bp) = bp->firmware->data + + be32_to_cpu(fw_hdr->xsem_pram_data.offset); + INIT_CSEM_INT_TABLE_DATA(bp) = bp->firmware->data + + be32_to_cpu(fw_hdr->csem_int_table_data.offset); + INIT_CSEM_PRAM_DATA(bp) = bp->firmware->data + + be32_to_cpu(fw_hdr->csem_pram_data.offset); + /* IRO */ + BNX2X_ALLOC_AND_SET(iro_arr, iro_alloc_err, bnx2x_prep_iro); + + return 0; + +iro_alloc_err: + kfree(bp->init_ops_offsets); +init_offsets_alloc_err: + kfree(bp->init_ops); +init_ops_alloc_err: + kfree(bp->init_data); +request_firmware_exit: + release_firmware(bp->firmware); + + return rc; +} + +static void bnx2x_release_firmware(struct bnx2x *bp) +{ + kfree(bp->init_ops_offsets); + kfree(bp->init_ops); + kfree(bp->init_data); + release_firmware(bp->firmware); +} + + +static struct bnx2x_func_sp_drv_ops bnx2x_func_sp_drv = { + .init_hw_cmn_chip = bnx2x_init_hw_common_chip, + .init_hw_cmn = bnx2x_init_hw_common, + .init_hw_port = bnx2x_init_hw_port, + .init_hw_func = bnx2x_init_hw_func, + + .reset_hw_cmn = bnx2x_reset_common, + .reset_hw_port = bnx2x_reset_port, + .reset_hw_func = bnx2x_reset_func, + + .gunzip_init = bnx2x_gunzip_init, + .gunzip_end = bnx2x_gunzip_end, + + .init_fw = bnx2x_init_firmware, + .release_fw = bnx2x_release_firmware, +}; + +void bnx2x__init_func_obj(struct bnx2x *bp) +{ + /* Prepare DMAE related driver resources */ + bnx2x_setup_dmae(bp); + + bnx2x_init_func_obj(bp, &bp->func_obj, + bnx2x_sp(bp, func_rdata), + bnx2x_sp_mapping(bp, func_rdata), + &bnx2x_func_sp_drv); +} + +/* must be called after sriov-enable */ +static inline int bnx2x_set_qm_cid_count(struct bnx2x *bp) +{ + int cid_count = BNX2X_L2_CID_COUNT(bp); + +#ifdef BCM_CNIC + cid_count += CNIC_CID_MAX; +#endif + return roundup(cid_count, QM_CID_ROUND); +} + +/** + * bnx2x_get_num_none_def_sbs - return the number of none default SBs + * + * @dev: pci device + * + */ +static inline int bnx2x_get_num_non_def_sbs(struct pci_dev *pdev) +{ + int pos; + u16 control; + + pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX); + + /* + * If MSI-X is not supported - return number of SBs needed to support + * one fast path queue: one FP queue + SB for CNIC + */ + if (!pos) + return 1 + CNIC_PRESENT; + + /* + * The value in the PCI configuration space is the index of the last + * entry, namely one less than the actual size of the table, which is + * exactly what we want to return from this function: number of all SBs + * without the default SB. + */ + pci_read_config_word(pdev, pos + PCI_MSI_FLAGS, &control); + return control & PCI_MSIX_FLAGS_QSIZE; +} + +static int __devinit bnx2x_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *dev = NULL; + struct bnx2x *bp; + int pcie_width, pcie_speed; + int rc, max_non_def_sbs; + int rx_count, tx_count, rss_count; + /* + * An estimated maximum supported CoS number according to the chip + * version. + * We will try to roughly estimate the maximum number of CoSes this chip + * may support in order to minimize the memory allocated for Tx + * netdev_queue's. This number will be accurately calculated during the + * initialization of bp->max_cos based on the chip versions AND chip + * revision in the bnx2x_init_bp(). + */ + u8 max_cos_est = 0; + + switch (ent->driver_data) { + case BCM57710: + case BCM57711: + case BCM57711E: + max_cos_est = BNX2X_MULTI_TX_COS_E1X; + break; + + case BCM57712: + case BCM57712_MF: + max_cos_est = BNX2X_MULTI_TX_COS_E2_E3A0; + break; + + case BCM57800: + case BCM57800_MF: + case BCM57810: + case BCM57810_MF: + case BCM57840: + case BCM57840_MF: + max_cos_est = BNX2X_MULTI_TX_COS_E3B0; + break; + + default: + pr_err("Unknown board_type (%ld), aborting\n", + ent->driver_data); + return -ENODEV; + } + + max_non_def_sbs = bnx2x_get_num_non_def_sbs(pdev); + + /* !!! FIXME !!! + * Do not allow the maximum SB count to grow above 16 + * since Special CIDs starts from 16*BNX2X_MULTI_TX_COS=48. + * We will use the FP_SB_MAX_E1x macro for this matter. + */ + max_non_def_sbs = min_t(int, FP_SB_MAX_E1x, max_non_def_sbs); + + WARN_ON(!max_non_def_sbs); + + /* Maximum number of RSS queues: one IGU SB goes to CNIC */ + rss_count = max_non_def_sbs - CNIC_PRESENT; + + /* Maximum number of netdev Rx queues: RSS + FCoE L2 */ + rx_count = rss_count + FCOE_PRESENT; + + /* + * Maximum number of netdev Tx queues: + * Maximum TSS queues * Maximum supported number of CoS + FCoE L2 + */ + tx_count = MAX_TXQS_PER_COS * max_cos_est + FCOE_PRESENT; + + /* dev zeroed in init_etherdev */ + dev = alloc_etherdev_mqs(sizeof(*bp), tx_count, rx_count); + if (!dev) { + dev_err(&pdev->dev, "Cannot allocate net device\n"); + return -ENOMEM; + } + + bp = netdev_priv(dev); + + DP(NETIF_MSG_DRV, "Allocated netdev with %d tx and %d rx queues\n", + tx_count, rx_count); + + bp->igu_sb_cnt = max_non_def_sbs; + bp->msg_enable = debug; + pci_set_drvdata(pdev, dev); + + rc = bnx2x_init_dev(pdev, dev, ent->driver_data); + if (rc < 0) { + free_netdev(dev); + return rc; + } + + DP(NETIF_MSG_DRV, "max_non_def_sbs %d\n", max_non_def_sbs); + + rc = bnx2x_init_bp(bp); + if (rc) + goto init_one_exit; + + /* + * Map doorbels here as we need the real value of bp->max_cos which + * is initialized in bnx2x_init_bp(). + */ + bp->doorbells = ioremap_nocache(pci_resource_start(pdev, 2), + min_t(u64, BNX2X_DB_SIZE(bp), + pci_resource_len(pdev, 2))); + if (!bp->doorbells) { + dev_err(&bp->pdev->dev, + "Cannot map doorbell space, aborting\n"); + rc = -ENOMEM; + goto init_one_exit; + } + + /* calc qm_cid_count */ + bp->qm_cid_count = bnx2x_set_qm_cid_count(bp); + +#ifdef BCM_CNIC + /* disable FCOE L2 queue for E1x and E3*/ + if (CHIP_IS_E1x(bp) || CHIP_IS_E3(bp)) + bp->flags |= NO_FCOE_FLAG; + +#endif + + /* Configure interrupt mode: try to enable MSI-X/MSI if + * needed, set bp->num_queues appropriately. + */ + bnx2x_set_int_mode(bp); + + /* Add all NAPI objects */ + bnx2x_add_all_napi(bp); + + rc = register_netdev(dev); + if (rc) { + dev_err(&pdev->dev, "Cannot register net device\n"); + goto init_one_exit; + } + +#ifdef BCM_CNIC + if (!NO_FCOE(bp)) { + /* Add storage MAC address */ + rtnl_lock(); + dev_addr_add(bp->dev, bp->fip_mac, NETDEV_HW_ADDR_T_SAN); + rtnl_unlock(); + } +#endif + + bnx2x_get_pcie_width_speed(bp, &pcie_width, &pcie_speed); + + netdev_info(dev, "%s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM\n", + board_info[ent->driver_data].name, + (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4), + pcie_width, + ((!CHIP_IS_E2(bp) && pcie_speed == 2) || + (CHIP_IS_E2(bp) && pcie_speed == 1)) ? + "5GHz (Gen2)" : "2.5GHz", + dev->base_addr, bp->pdev->irq, dev->dev_addr); + + return 0; + +init_one_exit: + if (bp->regview) + iounmap(bp->regview); + + if (bp->doorbells) + iounmap(bp->doorbells); + + free_netdev(dev); + + if (atomic_read(&pdev->enable_cnt) == 1) + pci_release_regions(pdev); + + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + + return rc; +} + +static void __devexit bnx2x_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2x *bp; + + if (!dev) { + dev_err(&pdev->dev, "BAD net device from bnx2x_init_one\n"); + return; + } + bp = netdev_priv(dev); + +#ifdef BCM_CNIC + /* Delete storage MAC address */ + if (!NO_FCOE(bp)) { + rtnl_lock(); + dev_addr_del(bp->dev, bp->fip_mac, NETDEV_HW_ADDR_T_SAN); + rtnl_unlock(); + } +#endif + +#ifdef BCM_DCBNL + /* Delete app tlvs from dcbnl */ + bnx2x_dcbnl_update_applist(bp, true); +#endif + + unregister_netdev(dev); + + /* Delete all NAPI objects */ + bnx2x_del_all_napi(bp); + + /* Power on: we can't let PCI layer write to us while we are in D3 */ + bnx2x_set_power_state(bp, PCI_D0); + + /* Disable MSI/MSI-X */ + bnx2x_disable_msi(bp); + + /* Power off */ + bnx2x_set_power_state(bp, PCI_D3hot); + + /* Make sure RESET task is not scheduled before continuing */ + cancel_delayed_work_sync(&bp->sp_rtnl_task); + + if (bp->regview) + iounmap(bp->regview); + + if (bp->doorbells) + iounmap(bp->doorbells); + + bnx2x_free_mem_bp(bp); + + free_netdev(dev); + + if (atomic_read(&pdev->enable_cnt) == 1) + pci_release_regions(pdev); + + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); +} + +static int bnx2x_eeh_nic_unload(struct bnx2x *bp) +{ + int i; + + bp->state = BNX2X_STATE_ERROR; + + bp->rx_mode = BNX2X_RX_MODE_NONE; + +#ifdef BCM_CNIC + bnx2x_cnic_notify(bp, CNIC_CTL_STOP_CMD); +#endif + /* Stop Tx */ + bnx2x_tx_disable(bp); + + bnx2x_netif_stop(bp, 0); + + del_timer_sync(&bp->timer); + + bnx2x_stats_handle(bp, STATS_EVENT_STOP); + + /* Release IRQs */ + bnx2x_free_irq(bp); + + /* Free SKBs, SGEs, TPA pool and driver internals */ + bnx2x_free_skbs(bp); + + for_each_rx_queue(bp, i) + bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE); + + bnx2x_free_mem(bp); + + bp->state = BNX2X_STATE_CLOSED; + + netif_carrier_off(bp->dev); + + return 0; +} + +static void bnx2x_eeh_recover(struct bnx2x *bp) +{ + u32 val; + + mutex_init(&bp->port.phy_mutex); + + bp->common.shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR); + bp->link_params.shmem_base = bp->common.shmem_base; + BNX2X_DEV_INFO("shmem offset is 0x%x\n", bp->common.shmem_base); + + if (!bp->common.shmem_base || + (bp->common.shmem_base < 0xA0000) || + (bp->common.shmem_base >= 0xC0000)) { + BNX2X_DEV_INFO("MCP not active\n"); + bp->flags |= NO_MCP_FLAG; + return; + } + + val = SHMEM_RD(bp, validity_map[BP_PORT(bp)]); + if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) + != (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) + BNX2X_ERR("BAD MCP validity signature\n"); + + if (!BP_NOMCP(bp)) { + bp->fw_seq = + (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) & + DRV_MSG_SEQ_NUMBER_MASK); + BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq); + } +} + +/** + * bnx2x_io_error_detected - called when PCI error is detected + * @pdev: Pointer to PCI device + * @state: The current pci connection state + * + * This function is called after a PCI bus error affecting + * this device has been detected. + */ +static pci_ers_result_t bnx2x_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2x *bp = netdev_priv(dev); + + rtnl_lock(); + + netif_device_detach(dev); + + if (state == pci_channel_io_perm_failure) { + rtnl_unlock(); + return PCI_ERS_RESULT_DISCONNECT; + } + + if (netif_running(dev)) + bnx2x_eeh_nic_unload(bp); + + pci_disable_device(pdev); + + rtnl_unlock(); + + /* Request a slot reset */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * bnx2x_io_slot_reset - called after the PCI bus has been reset + * @pdev: Pointer to PCI device + * + * Restart the card from scratch, as if from a cold-boot. + */ +static pci_ers_result_t bnx2x_io_slot_reset(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2x *bp = netdev_priv(dev); + + rtnl_lock(); + + if (pci_enable_device(pdev)) { + dev_err(&pdev->dev, + "Cannot re-enable PCI device after reset\n"); + rtnl_unlock(); + return PCI_ERS_RESULT_DISCONNECT; + } + + pci_set_master(pdev); + pci_restore_state(pdev); + + if (netif_running(dev)) + bnx2x_set_power_state(bp, PCI_D0); + + rtnl_unlock(); + + return PCI_ERS_RESULT_RECOVERED; +} + +/** + * bnx2x_io_resume - called when traffic can start flowing again + * @pdev: Pointer to PCI device + * + * This callback is called when the error recovery driver tells us that + * its OK to resume normal operation. + */ +static void bnx2x_io_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2x *bp = netdev_priv(dev); + + if (bp->recovery_state != BNX2X_RECOVERY_DONE) { + netdev_err(bp->dev, "Handling parity error recovery. " + "Try again later\n"); + return; + } + + rtnl_lock(); + + bnx2x_eeh_recover(bp); + + if (netif_running(dev)) + bnx2x_nic_load(bp, LOAD_NORMAL); + + netif_device_attach(dev); + + rtnl_unlock(); +} + +static struct pci_error_handlers bnx2x_err_handler = { + .error_detected = bnx2x_io_error_detected, + .slot_reset = bnx2x_io_slot_reset, + .resume = bnx2x_io_resume, +}; + +static struct pci_driver bnx2x_pci_driver = { + .name = DRV_MODULE_NAME, + .id_table = bnx2x_pci_tbl, + .probe = bnx2x_init_one, + .remove = __devexit_p(bnx2x_remove_one), + .suspend = bnx2x_suspend, + .resume = bnx2x_resume, + .err_handler = &bnx2x_err_handler, +}; + +static int __init bnx2x_init(void) +{ + int ret; + + pr_info("%s", version); + + bnx2x_wq = create_singlethread_workqueue("bnx2x"); + if (bnx2x_wq == NULL) { + pr_err("Cannot create workqueue\n"); + return -ENOMEM; + } + + ret = pci_register_driver(&bnx2x_pci_driver); + if (ret) { + pr_err("Cannot register driver\n"); + destroy_workqueue(bnx2x_wq); + } + return ret; +} + +static void __exit bnx2x_cleanup(void) +{ + pci_unregister_driver(&bnx2x_pci_driver); + + destroy_workqueue(bnx2x_wq); +} + +void bnx2x_notify_link_changed(struct bnx2x *bp) +{ + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + BP_FUNC(bp)*sizeof(u32), 1); +} + +module_init(bnx2x_init); +module_exit(bnx2x_cleanup); + +#ifdef BCM_CNIC +/** + * bnx2x_set_iscsi_eth_mac_addr - set iSCSI MAC(s). + * + * @bp: driver handle + * @set: set or clear the CAM entry + * + * This function will wait until the ramdord completion returns. + * Return 0 if success, -ENODEV if ramrod doesn't return. + */ +static inline int bnx2x_set_iscsi_eth_mac_addr(struct bnx2x *bp) +{ + unsigned long ramrod_flags = 0; + + __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); + return bnx2x_set_mac_one(bp, bp->cnic_eth_dev.iscsi_mac, + &bp->iscsi_l2_mac_obj, true, + BNX2X_ISCSI_ETH_MAC, &ramrod_flags); +} + +/* count denotes the number of new completions we have seen */ +static void bnx2x_cnic_sp_post(struct bnx2x *bp, int count) +{ + struct eth_spe *spe; + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) + return; +#endif + + spin_lock_bh(&bp->spq_lock); + BUG_ON(bp->cnic_spq_pending < count); + bp->cnic_spq_pending -= count; + + + for (; bp->cnic_kwq_pending; bp->cnic_kwq_pending--) { + u16 type = (le16_to_cpu(bp->cnic_kwq_cons->hdr.type) + & SPE_HDR_CONN_TYPE) >> + SPE_HDR_CONN_TYPE_SHIFT; + u8 cmd = (le32_to_cpu(bp->cnic_kwq_cons->hdr.conn_and_cmd_data) + >> SPE_HDR_CMD_ID_SHIFT) & 0xff; + + /* Set validation for iSCSI L2 client before sending SETUP + * ramrod + */ + if (type == ETH_CONNECTION_TYPE) { + if (cmd == RAMROD_CMD_ID_ETH_CLIENT_SETUP) + bnx2x_set_ctx_validation(bp, &bp->context. + vcxt[BNX2X_ISCSI_ETH_CID].eth, + BNX2X_ISCSI_ETH_CID); + } + + /* + * There may be not more than 8 L2, not more than 8 L5 SPEs + * and in the air. We also check that number of outstanding + * COMMON ramrods is not more than the EQ and SPQ can + * accommodate. + */ + if (type == ETH_CONNECTION_TYPE) { + if (!atomic_read(&bp->cq_spq_left)) + break; + else + atomic_dec(&bp->cq_spq_left); + } else if (type == NONE_CONNECTION_TYPE) { + if (!atomic_read(&bp->eq_spq_left)) + break; + else + atomic_dec(&bp->eq_spq_left); + } else if ((type == ISCSI_CONNECTION_TYPE) || + (type == FCOE_CONNECTION_TYPE)) { + if (bp->cnic_spq_pending >= + bp->cnic_eth_dev.max_kwqe_pending) + break; + else + bp->cnic_spq_pending++; + } else { + BNX2X_ERR("Unknown SPE type: %d\n", type); + bnx2x_panic(); + break; + } + + spe = bnx2x_sp_get_next(bp); + *spe = *bp->cnic_kwq_cons; + + DP(NETIF_MSG_TIMER, "pending on SPQ %d, on KWQ %d count %d\n", + bp->cnic_spq_pending, bp->cnic_kwq_pending, count); + + if (bp->cnic_kwq_cons == bp->cnic_kwq_last) + bp->cnic_kwq_cons = bp->cnic_kwq; + else + bp->cnic_kwq_cons++; + } + bnx2x_sp_prod_update(bp); + spin_unlock_bh(&bp->spq_lock); +} + +static int bnx2x_cnic_sp_queue(struct net_device *dev, + struct kwqe_16 *kwqes[], u32 count) +{ + struct bnx2x *bp = netdev_priv(dev); + int i; + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) + return -EIO; +#endif + + spin_lock_bh(&bp->spq_lock); + + for (i = 0; i < count; i++) { + struct eth_spe *spe = (struct eth_spe *)kwqes[i]; + + if (bp->cnic_kwq_pending == MAX_SP_DESC_CNT) + break; + + *bp->cnic_kwq_prod = *spe; + + bp->cnic_kwq_pending++; + + DP(NETIF_MSG_TIMER, "L5 SPQE %x %x %x:%x pos %d\n", + spe->hdr.conn_and_cmd_data, spe->hdr.type, + spe->data.update_data_addr.hi, + spe->data.update_data_addr.lo, + bp->cnic_kwq_pending); + + if (bp->cnic_kwq_prod == bp->cnic_kwq_last) + bp->cnic_kwq_prod = bp->cnic_kwq; + else + bp->cnic_kwq_prod++; + } + + spin_unlock_bh(&bp->spq_lock); + + if (bp->cnic_spq_pending < bp->cnic_eth_dev.max_kwqe_pending) + bnx2x_cnic_sp_post(bp, 0); + + return i; +} + +static int bnx2x_cnic_ctl_send(struct bnx2x *bp, struct cnic_ctl_info *ctl) +{ + struct cnic_ops *c_ops; + int rc = 0; + + mutex_lock(&bp->cnic_mutex); + c_ops = rcu_dereference_protected(bp->cnic_ops, + lockdep_is_held(&bp->cnic_mutex)); + if (c_ops) + rc = c_ops->cnic_ctl(bp->cnic_data, ctl); + mutex_unlock(&bp->cnic_mutex); + + return rc; +} + +static int bnx2x_cnic_ctl_send_bh(struct bnx2x *bp, struct cnic_ctl_info *ctl) +{ + struct cnic_ops *c_ops; + int rc = 0; + + rcu_read_lock(); + c_ops = rcu_dereference(bp->cnic_ops); + if (c_ops) + rc = c_ops->cnic_ctl(bp->cnic_data, ctl); + rcu_read_unlock(); + + return rc; +} + +/* + * for commands that have no data + */ +int bnx2x_cnic_notify(struct bnx2x *bp, int cmd) +{ + struct cnic_ctl_info ctl = {0}; + + ctl.cmd = cmd; + + return bnx2x_cnic_ctl_send(bp, &ctl); +} + +static void bnx2x_cnic_cfc_comp(struct bnx2x *bp, int cid, u8 err) +{ + struct cnic_ctl_info ctl = {0}; + + /* first we tell CNIC and only then we count this as a completion */ + ctl.cmd = CNIC_CTL_COMPLETION_CMD; + ctl.data.comp.cid = cid; + ctl.data.comp.error = err; + + bnx2x_cnic_ctl_send_bh(bp, &ctl); + bnx2x_cnic_sp_post(bp, 0); +} + + +/* Called with netif_addr_lock_bh() taken. + * Sets an rx_mode config for an iSCSI ETH client. + * Doesn't block. + * Completion should be checked outside. + */ +static void bnx2x_set_iscsi_eth_rx_mode(struct bnx2x *bp, bool start) +{ + unsigned long accept_flags = 0, ramrod_flags = 0; + u8 cl_id = bnx2x_cnic_eth_cl_id(bp, BNX2X_ISCSI_ETH_CL_ID_IDX); + int sched_state = BNX2X_FILTER_ISCSI_ETH_STOP_SCHED; + + if (start) { + /* Start accepting on iSCSI L2 ring. Accept all multicasts + * because it's the only way for UIO Queue to accept + * multicasts (in non-promiscuous mode only one Queue per + * function will receive multicast packets (leading in our + * case). + */ + __set_bit(BNX2X_ACCEPT_UNICAST, &accept_flags); + __set_bit(BNX2X_ACCEPT_ALL_MULTICAST, &accept_flags); + __set_bit(BNX2X_ACCEPT_BROADCAST, &accept_flags); + __set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept_flags); + + /* Clear STOP_PENDING bit if START is requested */ + clear_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, &bp->sp_state); + + sched_state = BNX2X_FILTER_ISCSI_ETH_START_SCHED; + } else + /* Clear START_PENDING bit if STOP is requested */ + clear_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED, &bp->sp_state); + + if (test_bit(BNX2X_FILTER_RX_MODE_PENDING, &bp->sp_state)) + set_bit(sched_state, &bp->sp_state); + else { + __set_bit(RAMROD_RX, &ramrod_flags); + bnx2x_set_q_rx_mode(bp, cl_id, 0, accept_flags, 0, + ramrod_flags); + } +} + + +static int bnx2x_drv_ctl(struct net_device *dev, struct drv_ctl_info *ctl) +{ + struct bnx2x *bp = netdev_priv(dev); + int rc = 0; + + switch (ctl->cmd) { + case DRV_CTL_CTXTBL_WR_CMD: { + u32 index = ctl->data.io.offset; + dma_addr_t addr = ctl->data.io.dma_addr; + + bnx2x_ilt_wr(bp, index, addr); + break; + } + + case DRV_CTL_RET_L5_SPQ_CREDIT_CMD: { + int count = ctl->data.credit.credit_count; + + bnx2x_cnic_sp_post(bp, count); + break; + } + + /* rtnl_lock is held. */ + case DRV_CTL_START_L2_CMD: { + struct cnic_eth_dev *cp = &bp->cnic_eth_dev; + unsigned long sp_bits = 0; + + /* Configure the iSCSI classification object */ + bnx2x_init_mac_obj(bp, &bp->iscsi_l2_mac_obj, + cp->iscsi_l2_client_id, + cp->iscsi_l2_cid, BP_FUNC(bp), + bnx2x_sp(bp, mac_rdata), + bnx2x_sp_mapping(bp, mac_rdata), + BNX2X_FILTER_MAC_PENDING, + &bp->sp_state, BNX2X_OBJ_TYPE_RX, + &bp->macs_pool); + + /* Set iSCSI MAC address */ + rc = bnx2x_set_iscsi_eth_mac_addr(bp); + if (rc) + break; + + mmiowb(); + barrier(); + + /* Start accepting on iSCSI L2 ring */ + + netif_addr_lock_bh(dev); + bnx2x_set_iscsi_eth_rx_mode(bp, true); + netif_addr_unlock_bh(dev); + + /* bits to wait on */ + __set_bit(BNX2X_FILTER_RX_MODE_PENDING, &sp_bits); + __set_bit(BNX2X_FILTER_ISCSI_ETH_START_SCHED, &sp_bits); + + if (!bnx2x_wait_sp_comp(bp, sp_bits)) + BNX2X_ERR("rx_mode completion timed out!\n"); + + break; + } + + /* rtnl_lock is held. */ + case DRV_CTL_STOP_L2_CMD: { + unsigned long sp_bits = 0; + + /* Stop accepting on iSCSI L2 ring */ + netif_addr_lock_bh(dev); + bnx2x_set_iscsi_eth_rx_mode(bp, false); + netif_addr_unlock_bh(dev); + + /* bits to wait on */ + __set_bit(BNX2X_FILTER_RX_MODE_PENDING, &sp_bits); + __set_bit(BNX2X_FILTER_ISCSI_ETH_STOP_SCHED, &sp_bits); + + if (!bnx2x_wait_sp_comp(bp, sp_bits)) + BNX2X_ERR("rx_mode completion timed out!\n"); + + mmiowb(); + barrier(); + + /* Unset iSCSI L2 MAC */ + rc = bnx2x_del_all_macs(bp, &bp->iscsi_l2_mac_obj, + BNX2X_ISCSI_ETH_MAC, true); + break; + } + case DRV_CTL_RET_L2_SPQ_CREDIT_CMD: { + int count = ctl->data.credit.credit_count; + + smp_mb__before_atomic_inc(); + atomic_add(count, &bp->cq_spq_left); + smp_mb__after_atomic_inc(); + break; + } + + default: + BNX2X_ERR("unknown command %x\n", ctl->cmd); + rc = -EINVAL; + } + + return rc; +} + +void bnx2x_setup_cnic_irq_info(struct bnx2x *bp) +{ + struct cnic_eth_dev *cp = &bp->cnic_eth_dev; + + if (bp->flags & USING_MSIX_FLAG) { + cp->drv_state |= CNIC_DRV_STATE_USING_MSIX; + cp->irq_arr[0].irq_flags |= CNIC_IRQ_FL_MSIX; + cp->irq_arr[0].vector = bp->msix_table[1].vector; + } else { + cp->drv_state &= ~CNIC_DRV_STATE_USING_MSIX; + cp->irq_arr[0].irq_flags &= ~CNIC_IRQ_FL_MSIX; + } + if (!CHIP_IS_E1x(bp)) + cp->irq_arr[0].status_blk = (void *)bp->cnic_sb.e2_sb; + else + cp->irq_arr[0].status_blk = (void *)bp->cnic_sb.e1x_sb; + + cp->irq_arr[0].status_blk_num = bnx2x_cnic_fw_sb_id(bp); + cp->irq_arr[0].status_blk_num2 = bnx2x_cnic_igu_sb_id(bp); + cp->irq_arr[1].status_blk = bp->def_status_blk; + cp->irq_arr[1].status_blk_num = DEF_SB_ID; + cp->irq_arr[1].status_blk_num2 = DEF_SB_IGU_ID; + + cp->num_irq = 2; +} + +static int bnx2x_register_cnic(struct net_device *dev, struct cnic_ops *ops, + void *data) +{ + struct bnx2x *bp = netdev_priv(dev); + struct cnic_eth_dev *cp = &bp->cnic_eth_dev; + + if (ops == NULL) + return -EINVAL; + + bp->cnic_kwq = kzalloc(PAGE_SIZE, GFP_KERNEL); + if (!bp->cnic_kwq) + return -ENOMEM; + + bp->cnic_kwq_cons = bp->cnic_kwq; + bp->cnic_kwq_prod = bp->cnic_kwq; + bp->cnic_kwq_last = bp->cnic_kwq + MAX_SP_DESC_CNT; + + bp->cnic_spq_pending = 0; + bp->cnic_kwq_pending = 0; + + bp->cnic_data = data; + + cp->num_irq = 0; + cp->drv_state |= CNIC_DRV_STATE_REGD; + cp->iro_arr = bp->iro_arr; + + bnx2x_setup_cnic_irq_info(bp); + + rcu_assign_pointer(bp->cnic_ops, ops); + + return 0; +} + +static int bnx2x_unregister_cnic(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + struct cnic_eth_dev *cp = &bp->cnic_eth_dev; + + mutex_lock(&bp->cnic_mutex); + cp->drv_state = 0; + rcu_assign_pointer(bp->cnic_ops, NULL); + mutex_unlock(&bp->cnic_mutex); + synchronize_rcu(); + kfree(bp->cnic_kwq); + bp->cnic_kwq = NULL; + + return 0; +} + +struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + struct cnic_eth_dev *cp = &bp->cnic_eth_dev; + + /* If both iSCSI and FCoE are disabled - return NULL in + * order to indicate CNIC that it should not try to work + * with this device. + */ + if (NO_ISCSI(bp) && NO_FCOE(bp)) + return NULL; + + cp->drv_owner = THIS_MODULE; + cp->chip_id = CHIP_ID(bp); + cp->pdev = bp->pdev; + cp->io_base = bp->regview; + cp->io_base2 = bp->doorbells; + cp->max_kwqe_pending = 8; + cp->ctx_blk_size = CDU_ILT_PAGE_SZ; + cp->ctx_tbl_offset = FUNC_ILT_BASE(BP_FUNC(bp)) + + bnx2x_cid_ilt_lines(bp); + cp->ctx_tbl_len = CNIC_ILT_LINES; + cp->starting_cid = bnx2x_cid_ilt_lines(bp) * ILT_PAGE_CIDS; + cp->drv_submit_kwqes_16 = bnx2x_cnic_sp_queue; + cp->drv_ctl = bnx2x_drv_ctl; + cp->drv_register_cnic = bnx2x_register_cnic; + cp->drv_unregister_cnic = bnx2x_unregister_cnic; + cp->fcoe_init_cid = BNX2X_FCOE_ETH_CID; + cp->iscsi_l2_client_id = + bnx2x_cnic_eth_cl_id(bp, BNX2X_ISCSI_ETH_CL_ID_IDX); + cp->iscsi_l2_cid = BNX2X_ISCSI_ETH_CID; + + if (NO_ISCSI_OOO(bp)) + cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI_OOO; + + if (NO_ISCSI(bp)) + cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI; + + if (NO_FCOE(bp)) + cp->drv_state |= CNIC_DRV_STATE_NO_FCOE; + + DP(BNX2X_MSG_SP, "page_size %d, tbl_offset %d, tbl_lines %d, " + "starting cid %d\n", + cp->ctx_blk_size, + cp->ctx_tbl_offset, + cp->ctx_tbl_len, + cp->starting_cid); + return cp; +} +EXPORT_SYMBOL(bnx2x_cnic_probe); + +#endif /* BCM_CNIC */ + diff --cc drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index 750e8445dac4,000000000000..fc7bd0f23c0b mode 100644,000000..100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@@ -1,7165 -1,0 +1,7177 @@@ +/* bnx2x_reg.h: Broadcom Everest network driver. + * + * Copyright (c) 2007-2011 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * The registers description starts with the register Access type followed + * by size in bits. For example [RW 32]. The access types are: + * R - Read only + * RC - Clear on read + * RW - Read/Write + * ST - Statistics register (clear on read) + * W - Write only + * WB - Wide bus register - the size is over 32 bits and it should be + * read/write in consecutive 32 bits accesses + * WR - Write Clear (write 1 to clear the bit) + * + */ +#ifndef BNX2X_REG_H +#define BNX2X_REG_H + +#define ATC_ATC_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS (0x1<<2) +#define ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU (0x1<<5) +#define ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT (0x1<<3) +#define ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR (0x1<<4) +#define ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND (0x1<<1) +/* [RW 1] Initiate the ATC array - reset all the valid bits */ +#define ATC_REG_ATC_INIT_ARRAY 0x1100b8 +/* [R 1] ATC initalization done */ +#define ATC_REG_ATC_INIT_DONE 0x1100bc +/* [RC 6] Interrupt register #0 read clear */ +#define ATC_REG_ATC_INT_STS_CLR 0x1101c0 +/* [RW 5] Parity mask register #0 read/write */ +#define ATC_REG_ATC_PRTY_MASK 0x1101d8 +/* [RC 5] Parity register #0 read clear */ +#define ATC_REG_ATC_PRTY_STS_CLR 0x1101d0 +/* [RW 19] Interrupt mask register #0 read/write */ +#define BRB1_REG_BRB1_INT_MASK 0x60128 +/* [R 19] Interrupt register #0 read */ +#define BRB1_REG_BRB1_INT_STS 0x6011c +/* [RW 4] Parity mask register #0 read/write */ +#define BRB1_REG_BRB1_PRTY_MASK 0x60138 +/* [R 4] Parity register #0 read */ +#define BRB1_REG_BRB1_PRTY_STS 0x6012c +/* [RC 4] Parity register #0 read clear */ +#define BRB1_REG_BRB1_PRTY_STS_CLR 0x60130 +/* [RW 10] At address BRB1_IND_FREE_LIST_PRS_CRDT initialize free head. At + * address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address + * BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. Warning - + * following reset the first rbc access to this reg must be write; there can + * be no more rbc writes after the first one; there can be any number of rbc + * read following the first write; rbc access not following these rules will + * result in hang condition. */ +#define BRB1_REG_FREE_LIST_PRS_CRDT 0x60200 +/* [RW 10] The number of free blocks below which the full signal to class 0 + * is asserted */ +#define BRB1_REG_FULL_0_XOFF_THRESHOLD_0 0x601d0 +#define BRB1_REG_FULL_0_XOFF_THRESHOLD_1 0x60230 +/* [RW 11] The number of free blocks above which the full signal to class 0 + * is de-asserted */ +#define BRB1_REG_FULL_0_XON_THRESHOLD_0 0x601d4 +#define BRB1_REG_FULL_0_XON_THRESHOLD_1 0x60234 +/* [RW 11] The number of free blocks below which the full signal to class 1 + * is asserted */ +#define BRB1_REG_FULL_1_XOFF_THRESHOLD_0 0x601d8 +#define BRB1_REG_FULL_1_XOFF_THRESHOLD_1 0x60238 +/* [RW 11] The number of free blocks above which the full signal to class 1 + * is de-asserted */ +#define BRB1_REG_FULL_1_XON_THRESHOLD_0 0x601dc +#define BRB1_REG_FULL_1_XON_THRESHOLD_1 0x6023c +/* [RW 11] The number of free blocks below which the full signal to the LB + * port is asserted */ +#define BRB1_REG_FULL_LB_XOFF_THRESHOLD 0x601e0 +/* [RW 10] The number of free blocks above which the full signal to the LB + * port is de-asserted */ +#define BRB1_REG_FULL_LB_XON_THRESHOLD 0x601e4 +/* [RW 10] The number of free blocks above which the High_llfc signal to + interface #n is de-asserted. */ +#define BRB1_REG_HIGH_LLFC_HIGH_THRESHOLD_0 0x6014c +/* [RW 10] The number of free blocks below which the High_llfc signal to + interface #n is asserted. */ +#define BRB1_REG_HIGH_LLFC_LOW_THRESHOLD_0 0x6013c +/* [RW 11] The number of blocks guarantied for the LB port */ +#define BRB1_REG_LB_GUARANTIED 0x601ec +/* [RW 11] The hysteresis on the guarantied buffer space for the Lb port + * before signaling XON. */ +#define BRB1_REG_LB_GUARANTIED_HYST 0x60264 +/* [RW 24] LL RAM data. */ +#define BRB1_REG_LL_RAM 0x61000 +/* [RW 10] The number of free blocks above which the Low_llfc signal to + interface #n is de-asserted. */ +#define BRB1_REG_LOW_LLFC_HIGH_THRESHOLD_0 0x6016c +/* [RW 10] The number of free blocks below which the Low_llfc signal to + interface #n is asserted. */ +#define BRB1_REG_LOW_LLFC_LOW_THRESHOLD_0 0x6015c +/* [RW 11] The number of blocks guarantied for class 0 in MAC 0. The + * register is applicable only when per_class_guaranty_mode is set. */ +#define BRB1_REG_MAC_0_CLASS_0_GUARANTIED 0x60244 +/* [RW 11] The hysteresis on the guarantied buffer space for class 0 in MAC + * 1 before signaling XON. The register is applicable only when + * per_class_guaranty_mode is set. */ +#define BRB1_REG_MAC_0_CLASS_0_GUARANTIED_HYST 0x60254 +/* [RW 11] The number of blocks guarantied for class 1 in MAC 0. The + * register is applicable only when per_class_guaranty_mode is set. */ +#define BRB1_REG_MAC_0_CLASS_1_GUARANTIED 0x60248 +/* [RW 11] The hysteresis on the guarantied buffer space for class 1in MAC 0 + * before signaling XON. The register is applicable only when + * per_class_guaranty_mode is set. */ +#define BRB1_REG_MAC_0_CLASS_1_GUARANTIED_HYST 0x60258 +/* [RW 11] The number of blocks guarantied for class 0in MAC1.The register + * is applicable only when per_class_guaranty_mode is set. */ +#define BRB1_REG_MAC_1_CLASS_0_GUARANTIED 0x6024c +/* [RW 11] The hysteresis on the guarantied buffer space for class 0 in MAC + * 1 before signaling XON. The register is applicable only when + * per_class_guaranty_mode is set. */ +#define BRB1_REG_MAC_1_CLASS_0_GUARANTIED_HYST 0x6025c +/* [RW 11] The number of blocks guarantied for class 1 in MAC 1. The + * register is applicable only when per_class_guaranty_mode is set. */ +#define BRB1_REG_MAC_1_CLASS_1_GUARANTIED 0x60250 +/* [RW 11] The hysteresis on the guarantied buffer space for class 1 in MAC + * 1 before signaling XON. The register is applicable only when + * per_class_guaranty_mode is set. */ +#define BRB1_REG_MAC_1_CLASS_1_GUARANTIED_HYST 0x60260 +/* [RW 11] The number of blocks guarantied for the MAC port. The register is + * applicable only when per_class_guaranty_mode is reset. */ +#define BRB1_REG_MAC_GUARANTIED_0 0x601e8 +#define BRB1_REG_MAC_GUARANTIED_1 0x60240 +/* [R 24] The number of full blocks. */ +#define BRB1_REG_NUM_OF_FULL_BLOCKS 0x60090 +/* [ST 32] The number of cycles that the write_full signal towards MAC #0 + was asserted. */ +#define BRB1_REG_NUM_OF_FULL_CYCLES_0 0x600c8 +#define BRB1_REG_NUM_OF_FULL_CYCLES_1 0x600cc +#define BRB1_REG_NUM_OF_FULL_CYCLES_4 0x600d8 +/* [ST 32] The number of cycles that the pause signal towards MAC #0 was + asserted. */ +#define BRB1_REG_NUM_OF_PAUSE_CYCLES_0 0x600b8 +#define BRB1_REG_NUM_OF_PAUSE_CYCLES_1 0x600bc +/* [RW 10] The number of free blocks below which the pause signal to class 0 + * is asserted */ +#define BRB1_REG_PAUSE_0_XOFF_THRESHOLD_0 0x601c0 +#define BRB1_REG_PAUSE_0_XOFF_THRESHOLD_1 0x60220 +/* [RW 11] The number of free blocks above which the pause signal to class 0 + * is de-asserted */ +#define BRB1_REG_PAUSE_0_XON_THRESHOLD_0 0x601c4 +#define BRB1_REG_PAUSE_0_XON_THRESHOLD_1 0x60224 +/* [RW 11] The number of free blocks below which the pause signal to class 1 + * is asserted */ +#define BRB1_REG_PAUSE_1_XOFF_THRESHOLD_0 0x601c8 +#define BRB1_REG_PAUSE_1_XOFF_THRESHOLD_1 0x60228 +/* [RW 11] The number of free blocks above which the pause signal to class 1 + * is de-asserted */ +#define BRB1_REG_PAUSE_1_XON_THRESHOLD_0 0x601cc +#define BRB1_REG_PAUSE_1_XON_THRESHOLD_1 0x6022c +/* [RW 10] Write client 0: De-assert pause threshold. Not Functional */ +#define BRB1_REG_PAUSE_HIGH_THRESHOLD_0 0x60078 +#define BRB1_REG_PAUSE_HIGH_THRESHOLD_1 0x6007c +/* [RW 10] Write client 0: Assert pause threshold. */ +#define BRB1_REG_PAUSE_LOW_THRESHOLD_0 0x60068 +#define BRB1_REG_PAUSE_LOW_THRESHOLD_1 0x6006c +/* [R 24] The number of full blocks occupied by port. */ +#define BRB1_REG_PORT_NUM_OCC_BLOCKS_0 0x60094 +/* [RW 1] Reset the design by software. */ +#define BRB1_REG_SOFT_RESET 0x600dc +/* [R 5] Used to read the value of the XX protection CAM occupancy counter. */ +#define CCM_REG_CAM_OCCUP 0xd0188 +/* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define CCM_REG_CCM_CFC_IFEN 0xd003c +/* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define CCM_REG_CCM_CQM_IFEN 0xd000c +/* [RW 1] If set the Q index; received from the QM is inserted to event ID. + Otherwise 0 is inserted. */ +#define CCM_REG_CCM_CQM_USE_Q 0xd00c0 +/* [RW 11] Interrupt mask register #0 read/write */ +#define CCM_REG_CCM_INT_MASK 0xd01e4 +/* [R 11] Interrupt register #0 read */ +#define CCM_REG_CCM_INT_STS 0xd01d8 +/* [RW 27] Parity mask register #0 read/write */ +#define CCM_REG_CCM_PRTY_MASK 0xd01f4 +/* [R 27] Parity register #0 read */ +#define CCM_REG_CCM_PRTY_STS 0xd01e8 +/* [RC 27] Parity register #0 read clear */ +#define CCM_REG_CCM_PRTY_STS_CLR 0xd01ec +/* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS + REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). + Is used to determine the number of the AG context REG-pairs written back; + when the input message Reg1WbFlg isn't set. */ +#define CCM_REG_CCM_REG0_SZ 0xd00c4 +/* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define CCM_REG_CCM_STORM0_IFEN 0xd0004 +/* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define CCM_REG_CCM_STORM1_IFEN 0xd0008 +/* [RW 1] CDU AG read Interface enable. If 0 - the request input is + disregarded; valid output is deasserted; all other signals are treated as + usual; if 1 - normal activity. */ +#define CCM_REG_CDU_AG_RD_IFEN 0xd0030 +/* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input + are disregarded; all other signals are treated as usual; if 1 - normal + activity. */ +#define CCM_REG_CDU_AG_WR_IFEN 0xd002c +/* [RW 1] CDU STORM read Interface enable. If 0 - the request input is + disregarded; valid output is deasserted; all other signals are treated as + usual; if 1 - normal activity. */ +#define CCM_REG_CDU_SM_RD_IFEN 0xd0038 +/* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid + input is disregarded; all other signals are treated as usual; if 1 - + normal activity. */ +#define CCM_REG_CDU_SM_WR_IFEN 0xd0034 +/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes + the initial credit value; read returns the current value of the credit + counter. Must be initialized to 1 at start-up. */ +#define CCM_REG_CFC_INIT_CRD 0xd0204 +/* [RW 2] Auxiliary counter flag Q number 1. */ +#define CCM_REG_CNT_AUX1_Q 0xd00c8 +/* [RW 2] Auxiliary counter flag Q number 2. */ +#define CCM_REG_CNT_AUX2_Q 0xd00cc +/* [RW 28] The CM header value for QM request (primary). */ +#define CCM_REG_CQM_CCM_HDR_P 0xd008c +/* [RW 28] The CM header value for QM request (secondary). */ +#define CCM_REG_CQM_CCM_HDR_S 0xd0090 +/* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define CCM_REG_CQM_CCM_IFEN 0xd0014 +/* [RW 6] QM output initial credit. Max credit available - 32. Write writes + the initial credit value; read returns the current value of the credit + counter. Must be initialized to 32 at start-up. */ +#define CCM_REG_CQM_INIT_CRD 0xd020c +/* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0 + stands for weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define CCM_REG_CQM_P_WEIGHT 0xd00b8 +/* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0 + stands for weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define CCM_REG_CQM_S_WEIGHT 0xd00bc +/* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define CCM_REG_CSDM_IFEN 0xd0018 +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the SDM interface is detected. */ +#define CCM_REG_CSDM_LENGTH_MIS 0xd0170 +/* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define CCM_REG_CSDM_WEIGHT 0xd00b4 +/* [RW 28] The CM header for QM formatting in case of an error in the QM + inputs. */ +#define CCM_REG_ERR_CCM_HDR 0xd0094 +/* [RW 8] The Event ID in case the input message ErrorFlg is set. */ +#define CCM_REG_ERR_EVNT_ID 0xd0098 +/* [RW 8] FIC0 output initial credit. Max credit available - 255. Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 64 at start-up. */ +#define CCM_REG_FIC0_INIT_CRD 0xd0210 +/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 64 at start-up. */ +#define CCM_REG_FIC1_INIT_CRD 0xd0214 +/* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1 + - strict priority defined by ~ccm_registers_gr_ag_pr.gr_ag_pr; + ~ccm_registers_gr_ld0_pr.gr_ld0_pr and + ~ccm_registers_gr_ld1_pr.gr_ld1_pr. Groups are according to channels and + outputs to STORM: aggregation; load FIC0; load FIC1 and store. */ +#define CCM_REG_GR_ARB_TYPE 0xd015c +/* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the + highest priority is 3. It is supposed; that the Store channel priority is + the compliment to 4 of the rest priorities - Aggregation channel; Load + (FIC0) channel and Load (FIC1). */ +#define CCM_REG_GR_LD0_PR 0xd0164 +/* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the + highest priority is 3. It is supposed; that the Store channel priority is + the compliment to 4 of the rest priorities - Aggregation channel; Load + (FIC0) channel and Load (FIC1). */ +#define CCM_REG_GR_LD1_PR 0xd0168 +/* [RW 2] General flags index. */ +#define CCM_REG_INV_DONE_Q 0xd0108 +/* [RW 4] The number of double REG-pairs(128 bits); loaded from the STORM + context and sent to STORM; for a specific connection type. The double + REG-pairs are used in order to align to STORM context row size of 128 + bits. The offset of these data in the STORM context is always 0. Index + _(0..15) stands for the connection type (one of 16). */ +#define CCM_REG_N_SM_CTX_LD_0 0xd004c +#define CCM_REG_N_SM_CTX_LD_1 0xd0050 +#define CCM_REG_N_SM_CTX_LD_2 0xd0054 +#define CCM_REG_N_SM_CTX_LD_3 0xd0058 +#define CCM_REG_N_SM_CTX_LD_4 0xd005c +/* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define CCM_REG_PBF_IFEN 0xd0028 +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the pbf interface is detected. */ +#define CCM_REG_PBF_LENGTH_MIS 0xd0180 +/* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define CCM_REG_PBF_WEIGHT 0xd00ac +#define CCM_REG_PHYS_QNUM1_0 0xd0134 +#define CCM_REG_PHYS_QNUM1_1 0xd0138 +#define CCM_REG_PHYS_QNUM2_0 0xd013c +#define CCM_REG_PHYS_QNUM2_1 0xd0140 +#define CCM_REG_PHYS_QNUM3_0 0xd0144 +#define CCM_REG_PHYS_QNUM3_1 0xd0148 +#define CCM_REG_QOS_PHYS_QNUM0_0 0xd0114 +#define CCM_REG_QOS_PHYS_QNUM0_1 0xd0118 +#define CCM_REG_QOS_PHYS_QNUM1_0 0xd011c +#define CCM_REG_QOS_PHYS_QNUM1_1 0xd0120 +#define CCM_REG_QOS_PHYS_QNUM2_0 0xd0124 +#define CCM_REG_QOS_PHYS_QNUM2_1 0xd0128 +#define CCM_REG_QOS_PHYS_QNUM3_0 0xd012c +#define CCM_REG_QOS_PHYS_QNUM3_1 0xd0130 +/* [RW 1] STORM - CM Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define CCM_REG_STORM_CCM_IFEN 0xd0010 +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the STORM interface is detected. */ +#define CCM_REG_STORM_LENGTH_MIS 0xd016c +/* [RW 3] The weight of the STORM input in the WRR (Weighted Round robin) + mechanism. 0 stands for weight 8 (the most prioritised); 1 stands for + weight 1(least prioritised); 2 stands for weight 2 (more prioritised); + tc. */ +#define CCM_REG_STORM_WEIGHT 0xd009c +/* [RW 1] Input tsem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define CCM_REG_TSEM_IFEN 0xd001c +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the tsem interface is detected. */ +#define CCM_REG_TSEM_LENGTH_MIS 0xd0174 +/* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define CCM_REG_TSEM_WEIGHT 0xd00a0 +/* [RW 1] Input usem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define CCM_REG_USEM_IFEN 0xd0024 +/* [RC 1] Set when message length mismatch (relative to last indication) at + the usem interface is detected. */ +#define CCM_REG_USEM_LENGTH_MIS 0xd017c +/* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define CCM_REG_USEM_WEIGHT 0xd00a8 +/* [RW 1] Input xsem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define CCM_REG_XSEM_IFEN 0xd0020 +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the xsem interface is detected. */ +#define CCM_REG_XSEM_LENGTH_MIS 0xd0178 +/* [RW 3] The weight of the input xsem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define CCM_REG_XSEM_WEIGHT 0xd00a4 +/* [RW 19] Indirect access to the descriptor table of the XX protection + mechanism. The fields are: [5:0] - message length; [12:6] - message + pointer; 18:13] - next pointer. */ +#define CCM_REG_XX_DESCR_TABLE 0xd0300 +#define CCM_REG_XX_DESCR_TABLE_SIZE 24 +/* [R 7] Used to read the value of XX protection Free counter. */ +#define CCM_REG_XX_FREE 0xd0184 +/* [RW 6] Initial value for the credit counter; responsible for fulfilling + of the Input Stage XX protection buffer by the XX protection pending + messages. Max credit available - 127. Write writes the initial credit + value; read returns the current value of the credit counter. Must be + initialized to maximum XX protected message size - 2 at start-up. */ +#define CCM_REG_XX_INIT_CRD 0xd0220 +/* [RW 7] The maximum number of pending messages; which may be stored in XX + protection. At read the ~ccm_registers_xx_free.xx_free counter is read. + At write comprises the start value of the ~ccm_registers_xx_free.xx_free + counter. */ +#define CCM_REG_XX_MSG_NUM 0xd0224 +/* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */ +#define CCM_REG_XX_OVFL_EVNT_ID 0xd0044 +/* [RW 18] Indirect access to the XX table of the XX protection mechanism. + The fields are: [5:0] - tail pointer; 11:6] - Link List size; 17:12] - + header pointer. */ +#define CCM_REG_XX_TABLE 0xd0280 +#define CDU_REG_CDU_CHK_MASK0 0x101000 +#define CDU_REG_CDU_CHK_MASK1 0x101004 +#define CDU_REG_CDU_CONTROL0 0x101008 +#define CDU_REG_CDU_DEBUG 0x101010 +#define CDU_REG_CDU_GLOBAL_PARAMS 0x101020 +/* [RW 7] Interrupt mask register #0 read/write */ +#define CDU_REG_CDU_INT_MASK 0x10103c +/* [R 7] Interrupt register #0 read */ +#define CDU_REG_CDU_INT_STS 0x101030 +/* [RW 5] Parity mask register #0 read/write */ +#define CDU_REG_CDU_PRTY_MASK 0x10104c +/* [R 5] Parity register #0 read */ +#define CDU_REG_CDU_PRTY_STS 0x101040 +/* [RC 5] Parity register #0 read clear */ +#define CDU_REG_CDU_PRTY_STS_CLR 0x101044 +/* [RC 32] logging of error data in case of a CDU load error: + {expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error; + ype_error; ctual_active; ctual_compressed_context}; */ +#define CDU_REG_ERROR_DATA 0x101014 +/* [WB 216] L1TT ram access. each entry has the following format : + {mrege_regions[7:0]; ffset12[5:0]...offset0[5:0]; + ength12[5:0]...length0[5:0]; d12[3:0]...id0[3:0]} */ +#define CDU_REG_L1TT 0x101800 +/* [WB 24] MATT ram access. each entry has the following + format:{RegionLength[11:0]; egionOffset[11:0]} */ +#define CDU_REG_MATT 0x101100 +/* [RW 1] when this bit is set the CDU operates in e1hmf mode */ +#define CDU_REG_MF_MODE 0x101050 +/* [R 1] indication the initializing the activity counter by the hardware + was done. */ +#define CFC_REG_AC_INIT_DONE 0x104078 +/* [RW 13] activity counter ram access */ +#define CFC_REG_ACTIVITY_COUNTER 0x104400 +#define CFC_REG_ACTIVITY_COUNTER_SIZE 256 +/* [R 1] indication the initializing the cams by the hardware was done. */ +#define CFC_REG_CAM_INIT_DONE 0x10407c +/* [RW 2] Interrupt mask register #0 read/write */ +#define CFC_REG_CFC_INT_MASK 0x104108 +/* [R 2] Interrupt register #0 read */ +#define CFC_REG_CFC_INT_STS 0x1040fc +/* [RC 2] Interrupt register #0 read clear */ +#define CFC_REG_CFC_INT_STS_CLR 0x104100 +/* [RW 4] Parity mask register #0 read/write */ +#define CFC_REG_CFC_PRTY_MASK 0x104118 +/* [R 4] Parity register #0 read */ +#define CFC_REG_CFC_PRTY_STS 0x10410c +/* [RC 4] Parity register #0 read clear */ +#define CFC_REG_CFC_PRTY_STS_CLR 0x104110 +/* [RW 21] CID cam access (21:1 - Data; alid - 0) */ +#define CFC_REG_CID_CAM 0x104800 +#define CFC_REG_CONTROL0 0x104028 +#define CFC_REG_DEBUG0 0x104050 +/* [RW 14] indicates per error (in #cfc_registers_cfc_error_vector.cfc_error + vector) whether the cfc should be disabled upon it */ +#define CFC_REG_DISABLE_ON_ERROR 0x104044 +/* [RC 14] CFC error vector. when the CFC detects an internal error it will + set one of these bits. the bit description can be found in CFC + specifications */ +#define CFC_REG_ERROR_VECTOR 0x10403c +/* [WB 93] LCID info ram access */ +#define CFC_REG_INFO_RAM 0x105000 +#define CFC_REG_INFO_RAM_SIZE 1024 +#define CFC_REG_INIT_REG 0x10404c +#define CFC_REG_INTERFACES 0x104058 +/* [RW 24] {weight_load_client7[2:0] to weight_load_client0[2:0]}. this + field allows changing the priorities of the weighted-round-robin arbiter + which selects which CFC load client should be served next */ +#define CFC_REG_LCREQ_WEIGHTS 0x104084 +/* [RW 16] Link List ram access; data = {prev_lcid; ext_lcid} */ +#define CFC_REG_LINK_LIST 0x104c00 +#define CFC_REG_LINK_LIST_SIZE 256 +/* [R 1] indication the initializing the link list by the hardware was done. */ +#define CFC_REG_LL_INIT_DONE 0x104074 +/* [R 9] Number of allocated LCIDs which are at empty state */ +#define CFC_REG_NUM_LCIDS_ALLOC 0x104020 +/* [R 9] Number of Arriving LCIDs in Link List Block */ +#define CFC_REG_NUM_LCIDS_ARRIVING 0x104004 +#define CFC_REG_NUM_LCIDS_INSIDE_PF 0x104120 +/* [R 9] Number of Leaving LCIDs in Link List Block */ +#define CFC_REG_NUM_LCIDS_LEAVING 0x104018 +#define CFC_REG_WEAK_ENABLE_PF 0x104124 +/* [RW 8] The event id for aggregated interrupt 0 */ +#define CSDM_REG_AGG_INT_EVENT_0 0xc2038 +#define CSDM_REG_AGG_INT_EVENT_10 0xc2060 +#define CSDM_REG_AGG_INT_EVENT_11 0xc2064 +#define CSDM_REG_AGG_INT_EVENT_12 0xc2068 +#define CSDM_REG_AGG_INT_EVENT_13 0xc206c +#define CSDM_REG_AGG_INT_EVENT_14 0xc2070 +#define CSDM_REG_AGG_INT_EVENT_15 0xc2074 +#define CSDM_REG_AGG_INT_EVENT_16 0xc2078 +#define CSDM_REG_AGG_INT_EVENT_2 0xc2040 +#define CSDM_REG_AGG_INT_EVENT_3 0xc2044 +#define CSDM_REG_AGG_INT_EVENT_4 0xc2048 +#define CSDM_REG_AGG_INT_EVENT_5 0xc204c +#define CSDM_REG_AGG_INT_EVENT_6 0xc2050 +#define CSDM_REG_AGG_INT_EVENT_7 0xc2054 +#define CSDM_REG_AGG_INT_EVENT_8 0xc2058 +#define CSDM_REG_AGG_INT_EVENT_9 0xc205c +/* [RW 1] For each aggregated interrupt index whether the mode is normal (0) + or auto-mask-mode (1) */ +#define CSDM_REG_AGG_INT_MODE_10 0xc21e0 +#define CSDM_REG_AGG_INT_MODE_11 0xc21e4 +#define CSDM_REG_AGG_INT_MODE_12 0xc21e8 +#define CSDM_REG_AGG_INT_MODE_13 0xc21ec +#define CSDM_REG_AGG_INT_MODE_14 0xc21f0 +#define CSDM_REG_AGG_INT_MODE_15 0xc21f4 +#define CSDM_REG_AGG_INT_MODE_16 0xc21f8 +#define CSDM_REG_AGG_INT_MODE_6 0xc21d0 +#define CSDM_REG_AGG_INT_MODE_7 0xc21d4 +#define CSDM_REG_AGG_INT_MODE_8 0xc21d8 +#define CSDM_REG_AGG_INT_MODE_9 0xc21dc +/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */ +#define CSDM_REG_CFC_RSP_START_ADDR 0xc2008 +/* [RW 16] The maximum value of the completion counter #0 */ +#define CSDM_REG_CMP_COUNTER_MAX0 0xc201c +/* [RW 16] The maximum value of the completion counter #1 */ +#define CSDM_REG_CMP_COUNTER_MAX1 0xc2020 +/* [RW 16] The maximum value of the completion counter #2 */ +#define CSDM_REG_CMP_COUNTER_MAX2 0xc2024 +/* [RW 16] The maximum value of the completion counter #3 */ +#define CSDM_REG_CMP_COUNTER_MAX3 0xc2028 +/* [RW 13] The start address in the internal RAM for the completion + counters. */ +#define CSDM_REG_CMP_COUNTER_START_ADDR 0xc200c +/* [RW 32] Interrupt mask register #0 read/write */ +#define CSDM_REG_CSDM_INT_MASK_0 0xc229c +#define CSDM_REG_CSDM_INT_MASK_1 0xc22ac +/* [R 32] Interrupt register #0 read */ +#define CSDM_REG_CSDM_INT_STS_0 0xc2290 +#define CSDM_REG_CSDM_INT_STS_1 0xc22a0 +/* [RW 11] Parity mask register #0 read/write */ +#define CSDM_REG_CSDM_PRTY_MASK 0xc22bc +/* [R 11] Parity register #0 read */ +#define CSDM_REG_CSDM_PRTY_STS 0xc22b0 +/* [RC 11] Parity register #0 read clear */ +#define CSDM_REG_CSDM_PRTY_STS_CLR 0xc22b4 +#define CSDM_REG_ENABLE_IN1 0xc2238 +#define CSDM_REG_ENABLE_IN2 0xc223c +#define CSDM_REG_ENABLE_OUT1 0xc2240 +#define CSDM_REG_ENABLE_OUT2 0xc2244 +/* [RW 4] The initial number of messages that can be sent to the pxp control + interface without receiving any ACK. */ +#define CSDM_REG_INIT_CREDIT_PXP_CTRL 0xc24bc +/* [ST 32] The number of ACK after placement messages received */ +#define CSDM_REG_NUM_OF_ACK_AFTER_PLACE 0xc227c +/* [ST 32] The number of packet end messages received from the parser */ +#define CSDM_REG_NUM_OF_PKT_END_MSG 0xc2274 +/* [ST 32] The number of requests received from the pxp async if */ +#define CSDM_REG_NUM_OF_PXP_ASYNC_REQ 0xc2278 +/* [ST 32] The number of commands received in queue 0 */ +#define CSDM_REG_NUM_OF_Q0_CMD 0xc2248 +/* [ST 32] The number of commands received in queue 10 */ +#define CSDM_REG_NUM_OF_Q10_CMD 0xc226c +/* [ST 32] The number of commands received in queue 11 */ +#define CSDM_REG_NUM_OF_Q11_CMD 0xc2270 +/* [ST 32] The number of commands received in queue 1 */ +#define CSDM_REG_NUM_OF_Q1_CMD 0xc224c +/* [ST 32] The number of commands received in queue 3 */ +#define CSDM_REG_NUM_OF_Q3_CMD 0xc2250 +/* [ST 32] The number of commands received in queue 4 */ +#define CSDM_REG_NUM_OF_Q4_CMD 0xc2254 +/* [ST 32] The number of commands received in queue 5 */ +#define CSDM_REG_NUM_OF_Q5_CMD 0xc2258 +/* [ST 32] The number of commands received in queue 6 */ +#define CSDM_REG_NUM_OF_Q6_CMD 0xc225c +/* [ST 32] The number of commands received in queue 7 */ +#define CSDM_REG_NUM_OF_Q7_CMD 0xc2260 +/* [ST 32] The number of commands received in queue 8 */ +#define CSDM_REG_NUM_OF_Q8_CMD 0xc2264 +/* [ST 32] The number of commands received in queue 9 */ +#define CSDM_REG_NUM_OF_Q9_CMD 0xc2268 +/* [RW 13] The start address in the internal RAM for queue counters */ +#define CSDM_REG_Q_COUNTER_START_ADDR 0xc2010 +/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */ +#define CSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0xc2548 +/* [R 1] parser fifo empty in sdm_sync block */ +#define CSDM_REG_SYNC_PARSER_EMPTY 0xc2550 +/* [R 1] parser serial fifo empty in sdm_sync block */ +#define CSDM_REG_SYNC_SYNC_EMPTY 0xc2558 +/* [RW 32] Tick for timer counter. Applicable only when + ~csdm_registers_timer_tick_enable.timer_tick_enable =1 */ +#define CSDM_REG_TIMER_TICK 0xc2000 +/* [RW 5] The number of time_slots in the arbitration cycle */ +#define CSEM_REG_ARB_CYCLE_SIZE 0x200034 +/* [RW 3] The source that is associated with arbitration element 0. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2 */ +#define CSEM_REG_ARB_ELEMENT0 0x200020 +/* [RW 3] The source that is associated with arbitration element 1. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~csem_registers_arb_element0.arb_element0 */ +#define CSEM_REG_ARB_ELEMENT1 0x200024 +/* [RW 3] The source that is associated with arbitration element 2. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~csem_registers_arb_element0.arb_element0 + and ~csem_registers_arb_element1.arb_element1 */ +#define CSEM_REG_ARB_ELEMENT2 0x200028 +/* [RW 3] The source that is associated with arbitration element 3. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2.Could + not be equal to register ~csem_registers_arb_element0.arb_element0 and + ~csem_registers_arb_element1.arb_element1 and + ~csem_registers_arb_element2.arb_element2 */ +#define CSEM_REG_ARB_ELEMENT3 0x20002c +/* [RW 3] The source that is associated with arbitration element 4. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~csem_registers_arb_element0.arb_element0 + and ~csem_registers_arb_element1.arb_element1 and + ~csem_registers_arb_element2.arb_element2 and + ~csem_registers_arb_element3.arb_element3 */ +#define CSEM_REG_ARB_ELEMENT4 0x200030 +/* [RW 32] Interrupt mask register #0 read/write */ +#define CSEM_REG_CSEM_INT_MASK_0 0x200110 +#define CSEM_REG_CSEM_INT_MASK_1 0x200120 +/* [R 32] Interrupt register #0 read */ +#define CSEM_REG_CSEM_INT_STS_0 0x200104 +#define CSEM_REG_CSEM_INT_STS_1 0x200114 +/* [RW 32] Parity mask register #0 read/write */ +#define CSEM_REG_CSEM_PRTY_MASK_0 0x200130 +#define CSEM_REG_CSEM_PRTY_MASK_1 0x200140 +/* [R 32] Parity register #0 read */ +#define CSEM_REG_CSEM_PRTY_STS_0 0x200124 +#define CSEM_REG_CSEM_PRTY_STS_1 0x200134 +/* [RC 32] Parity register #0 read clear */ +#define CSEM_REG_CSEM_PRTY_STS_CLR_0 0x200128 +#define CSEM_REG_CSEM_PRTY_STS_CLR_1 0x200138 +#define CSEM_REG_ENABLE_IN 0x2000a4 +#define CSEM_REG_ENABLE_OUT 0x2000a8 +/* [RW 32] This address space contains all registers and memories that are + placed in SEM_FAST block. The SEM_FAST registers are described in + appendix B. In order to access the sem_fast registers the base address + ~fast_memory.fast_memory should be added to eachsem_fast register offset. */ +#define CSEM_REG_FAST_MEMORY 0x220000 +/* [RW 1] Disables input messages from FIC0 May be updated during run_time + by the microcode */ +#define CSEM_REG_FIC0_DISABLE 0x200224 +/* [RW 1] Disables input messages from FIC1 May be updated during run_time + by the microcode */ +#define CSEM_REG_FIC1_DISABLE 0x200234 +/* [RW 15] Interrupt table Read and write access to it is not possible in + the middle of the work */ +#define CSEM_REG_INT_TABLE 0x200400 +/* [ST 24] Statistics register. The number of messages that entered through + FIC0 */ +#define CSEM_REG_MSG_NUM_FIC0 0x200000 +/* [ST 24] Statistics register. The number of messages that entered through + FIC1 */ +#define CSEM_REG_MSG_NUM_FIC1 0x200004 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC0 */ +#define CSEM_REG_MSG_NUM_FOC0 0x200008 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC1 */ +#define CSEM_REG_MSG_NUM_FOC1 0x20000c +/* [ST 24] Statistics register. The number of messages that were sent to + FOC2 */ +#define CSEM_REG_MSG_NUM_FOC2 0x200010 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC3 */ +#define CSEM_REG_MSG_NUM_FOC3 0x200014 +/* [RW 1] Disables input messages from the passive buffer May be updated + during run_time by the microcode */ +#define CSEM_REG_PAS_DISABLE 0x20024c +/* [WB 128] Debug only. Passive buffer memory */ +#define CSEM_REG_PASSIVE_BUFFER 0x202000 +/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */ +#define CSEM_REG_PRAM 0x240000 +/* [R 16] Valid sleeping threads indication have bit per thread */ +#define CSEM_REG_SLEEP_THREADS_VALID 0x20026c +/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */ +#define CSEM_REG_SLOW_EXT_STORE_EMPTY 0x2002a0 +/* [RW 16] List of free threads . There is a bit per thread. */ +#define CSEM_REG_THREADS_LIST 0x2002e4 +/* [RW 3] The arbitration scheme of time_slot 0 */ +#define CSEM_REG_TS_0_AS 0x200038 +/* [RW 3] The arbitration scheme of time_slot 10 */ +#define CSEM_REG_TS_10_AS 0x200060 +/* [RW 3] The arbitration scheme of time_slot 11 */ +#define CSEM_REG_TS_11_AS 0x200064 +/* [RW 3] The arbitration scheme of time_slot 12 */ +#define CSEM_REG_TS_12_AS 0x200068 +/* [RW 3] The arbitration scheme of time_slot 13 */ +#define CSEM_REG_TS_13_AS 0x20006c +/* [RW 3] The arbitration scheme of time_slot 14 */ +#define CSEM_REG_TS_14_AS 0x200070 +/* [RW 3] The arbitration scheme of time_slot 15 */ +#define CSEM_REG_TS_15_AS 0x200074 +/* [RW 3] The arbitration scheme of time_slot 16 */ +#define CSEM_REG_TS_16_AS 0x200078 +/* [RW 3] The arbitration scheme of time_slot 17 */ +#define CSEM_REG_TS_17_AS 0x20007c +/* [RW 3] The arbitration scheme of time_slot 18 */ +#define CSEM_REG_TS_18_AS 0x200080 +/* [RW 3] The arbitration scheme of time_slot 1 */ +#define CSEM_REG_TS_1_AS 0x20003c +/* [RW 3] The arbitration scheme of time_slot 2 */ +#define CSEM_REG_TS_2_AS 0x200040 +/* [RW 3] The arbitration scheme of time_slot 3 */ +#define CSEM_REG_TS_3_AS 0x200044 +/* [RW 3] The arbitration scheme of time_slot 4 */ +#define CSEM_REG_TS_4_AS 0x200048 +/* [RW 3] The arbitration scheme of time_slot 5 */ +#define CSEM_REG_TS_5_AS 0x20004c +/* [RW 3] The arbitration scheme of time_slot 6 */ +#define CSEM_REG_TS_6_AS 0x200050 +/* [RW 3] The arbitration scheme of time_slot 7 */ +#define CSEM_REG_TS_7_AS 0x200054 +/* [RW 3] The arbitration scheme of time_slot 8 */ +#define CSEM_REG_TS_8_AS 0x200058 +/* [RW 3] The arbitration scheme of time_slot 9 */ +#define CSEM_REG_TS_9_AS 0x20005c +/* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64 + * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */ +#define CSEM_REG_VFPF_ERR_NUM 0x200380 +/* [RW 1] Parity mask register #0 read/write */ +#define DBG_REG_DBG_PRTY_MASK 0xc0a8 +/* [R 1] Parity register #0 read */ +#define DBG_REG_DBG_PRTY_STS 0xc09c +/* [RC 1] Parity register #0 read clear */ +#define DBG_REG_DBG_PRTY_STS_CLR 0xc0a0 +/* [RW 1] When set the DMAE will process the commands as in E1.5. 1.The + * function that is used is always SRC-PCI; 2.VF_Valid = 0; 3.VFID=0; + * 4.Completion function=0; 5.Error handling=0 */ +#define DMAE_REG_BACKWARD_COMP_EN 0x10207c +/* [RW 32] Commands memory. The address to command X; row Y is to calculated + as 14*X+Y. */ +#define DMAE_REG_CMD_MEM 0x102400 +#define DMAE_REG_CMD_MEM_SIZE 224 +/* [RW 1] If 0 - the CRC-16c initial value is all zeroes; if 1 - the CRC-16c + initial value is all ones. */ +#define DMAE_REG_CRC16C_INIT 0x10201c +/* [RW 1] If 0 - the CRC-16 T10 initial value is all zeroes; if 1 - the + CRC-16 T10 initial value is all ones. */ +#define DMAE_REG_CRC16T10_INIT 0x102020 +/* [RW 2] Interrupt mask register #0 read/write */ +#define DMAE_REG_DMAE_INT_MASK 0x102054 +/* [RW 4] Parity mask register #0 read/write */ +#define DMAE_REG_DMAE_PRTY_MASK 0x102064 +/* [R 4] Parity register #0 read */ +#define DMAE_REG_DMAE_PRTY_STS 0x102058 +/* [RC 4] Parity register #0 read clear */ +#define DMAE_REG_DMAE_PRTY_STS_CLR 0x10205c +/* [RW 1] Command 0 go. */ +#define DMAE_REG_GO_C0 0x102080 +/* [RW 1] Command 1 go. */ +#define DMAE_REG_GO_C1 0x102084 +/* [RW 1] Command 10 go. */ +#define DMAE_REG_GO_C10 0x102088 +/* [RW 1] Command 11 go. */ +#define DMAE_REG_GO_C11 0x10208c +/* [RW 1] Command 12 go. */ +#define DMAE_REG_GO_C12 0x102090 +/* [RW 1] Command 13 go. */ +#define DMAE_REG_GO_C13 0x102094 +/* [RW 1] Command 14 go. */ +#define DMAE_REG_GO_C14 0x102098 +/* [RW 1] Command 15 go. */ +#define DMAE_REG_GO_C15 0x10209c +/* [RW 1] Command 2 go. */ +#define DMAE_REG_GO_C2 0x1020a0 +/* [RW 1] Command 3 go. */ +#define DMAE_REG_GO_C3 0x1020a4 +/* [RW 1] Command 4 go. */ +#define DMAE_REG_GO_C4 0x1020a8 +/* [RW 1] Command 5 go. */ +#define DMAE_REG_GO_C5 0x1020ac +/* [RW 1] Command 6 go. */ +#define DMAE_REG_GO_C6 0x1020b0 +/* [RW 1] Command 7 go. */ +#define DMAE_REG_GO_C7 0x1020b4 +/* [RW 1] Command 8 go. */ +#define DMAE_REG_GO_C8 0x1020b8 +/* [RW 1] Command 9 go. */ +#define DMAE_REG_GO_C9 0x1020bc +/* [RW 1] DMAE GRC Interface (Target; aster) enable. If 0 - the acknowledge + input is disregarded; valid is deasserted; all other signals are treated + as usual; if 1 - normal activity. */ +#define DMAE_REG_GRC_IFEN 0x102008 +/* [RW 1] DMAE PCI Interface (Request; ead; rite) enable. If 0 - the + acknowledge input is disregarded; valid is deasserted; full is asserted; + all other signals are treated as usual; if 1 - normal activity. */ +#define DMAE_REG_PCI_IFEN 0x102004 +/* [RW 4] DMAE- PCI Request Interface initial credit. Write writes the + initial value to the credit counter; related to the address. Read returns + the current value of the counter. */ +#define DMAE_REG_PXP_REQ_INIT_CRD 0x1020c0 +/* [RW 8] Aggregation command. */ +#define DORQ_REG_AGG_CMD0 0x170060 +/* [RW 8] Aggregation command. */ +#define DORQ_REG_AGG_CMD1 0x170064 +/* [RW 8] Aggregation command. */ +#define DORQ_REG_AGG_CMD2 0x170068 +/* [RW 8] Aggregation command. */ +#define DORQ_REG_AGG_CMD3 0x17006c +/* [RW 28] UCM Header. */ +#define DORQ_REG_CMHEAD_RX 0x170050 +/* [RW 32] Doorbell address for RBC doorbells (function 0). */ +#define DORQ_REG_DB_ADDR0 0x17008c +/* [RW 5] Interrupt mask register #0 read/write */ +#define DORQ_REG_DORQ_INT_MASK 0x170180 +/* [R 5] Interrupt register #0 read */ +#define DORQ_REG_DORQ_INT_STS 0x170174 +/* [RC 5] Interrupt register #0 read clear */ +#define DORQ_REG_DORQ_INT_STS_CLR 0x170178 +/* [RW 2] Parity mask register #0 read/write */ +#define DORQ_REG_DORQ_PRTY_MASK 0x170190 +/* [R 2] Parity register #0 read */ +#define DORQ_REG_DORQ_PRTY_STS 0x170184 +/* [RC 2] Parity register #0 read clear */ +#define DORQ_REG_DORQ_PRTY_STS_CLR 0x170188 +/* [RW 8] The address to write the DPM CID to STORM. */ +#define DORQ_REG_DPM_CID_ADDR 0x170044 +/* [RW 5] The DPM mode CID extraction offset. */ +#define DORQ_REG_DPM_CID_OFST 0x170030 +/* [RW 12] The threshold of the DQ FIFO to send the almost full interrupt. */ +#define DORQ_REG_DQ_FIFO_AFULL_TH 0x17007c +/* [RW 12] The threshold of the DQ FIFO to send the full interrupt. */ +#define DORQ_REG_DQ_FIFO_FULL_TH 0x170078 +/* [R 13] Current value of the DQ FIFO fill level according to following + pointer. The range is 0 - 256 FIFO rows; where each row stands for the + doorbell. */ +#define DORQ_REG_DQ_FILL_LVLF 0x1700a4 +/* [R 1] DQ FIFO full status. Is set; when FIFO filling level is more or + equal to full threshold; reset on full clear. */ +#define DORQ_REG_DQ_FULL_ST 0x1700c0 +/* [RW 28] The value sent to CM header in the case of CFC load error. */ +#define DORQ_REG_ERR_CMHEAD 0x170058 +#define DORQ_REG_IF_EN 0x170004 +#define DORQ_REG_MODE_ACT 0x170008 +/* [RW 5] The normal mode CID extraction offset. */ +#define DORQ_REG_NORM_CID_OFST 0x17002c +/* [RW 28] TCM Header when only TCP context is loaded. */ +#define DORQ_REG_NORM_CMHEAD_TX 0x17004c +/* [RW 3] The number of simultaneous outstanding requests to Context Fetch + Interface. */ +#define DORQ_REG_OUTST_REQ 0x17003c +#define DORQ_REG_PF_USAGE_CNT 0x1701d0 +#define DORQ_REG_REGN 0x170038 +/* [R 4] Current value of response A counter credit. Initial credit is + configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd + register. */ +#define DORQ_REG_RSPA_CRD_CNT 0x1700ac +/* [R 4] Current value of response B counter credit. Initial credit is + configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd + register. */ +#define DORQ_REG_RSPB_CRD_CNT 0x1700b0 +/* [RW 4] The initial credit at the Doorbell Response Interface. The write + writes the same initial credit to the rspa_crd_cnt and rspb_crd_cnt. The + read reads this written value. */ +#define DORQ_REG_RSP_INIT_CRD 0x170048 +/* [RW 4] Initial activity counter value on the load request; when the + shortcut is done. */ +#define DORQ_REG_SHRT_ACT_CNT 0x170070 +/* [RW 28] TCM Header when both ULP and TCP context is loaded. */ +#define DORQ_REG_SHRT_CMHEAD 0x170054 +#define HC_CONFIG_0_REG_ATTN_BIT_EN_0 (0x1<<4) +#define HC_CONFIG_0_REG_BLOCK_DISABLE_0 (0x1<<0) +#define HC_CONFIG_0_REG_INT_LINE_EN_0 (0x1<<3) +#define HC_CONFIG_0_REG_MSI_ATTN_EN_0 (0x1<<7) +#define HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 (0x1<<2) +#define HC_CONFIG_0_REG_SINGLE_ISR_EN_0 (0x1<<1) +#define HC_CONFIG_1_REG_BLOCK_DISABLE_1 (0x1<<0) +#define HC_REG_AGG_INT_0 0x108050 +#define HC_REG_AGG_INT_1 0x108054 +#define HC_REG_ATTN_BIT 0x108120 +#define HC_REG_ATTN_IDX 0x108100 +#define HC_REG_ATTN_MSG0_ADDR_L 0x108018 +#define HC_REG_ATTN_MSG1_ADDR_L 0x108020 +#define HC_REG_ATTN_NUM_P0 0x108038 +#define HC_REG_ATTN_NUM_P1 0x10803c +#define HC_REG_COMMAND_REG 0x108180 +#define HC_REG_CONFIG_0 0x108000 +#define HC_REG_CONFIG_1 0x108004 +#define HC_REG_FUNC_NUM_P0 0x1080ac +#define HC_REG_FUNC_NUM_P1 0x1080b0 +/* [RW 3] Parity mask register #0 read/write */ +#define HC_REG_HC_PRTY_MASK 0x1080a0 +/* [R 3] Parity register #0 read */ +#define HC_REG_HC_PRTY_STS 0x108094 +/* [RC 3] Parity register #0 read clear */ +#define HC_REG_HC_PRTY_STS_CLR 0x108098 +#define HC_REG_INT_MASK 0x108108 +#define HC_REG_LEADING_EDGE_0 0x108040 +#define HC_REG_LEADING_EDGE_1 0x108048 +#define HC_REG_MAIN_MEMORY 0x108800 +#define HC_REG_MAIN_MEMORY_SIZE 152 +#define HC_REG_P0_PROD_CONS 0x108200 +#define HC_REG_P1_PROD_CONS 0x108400 +#define HC_REG_PBA_COMMAND 0x108140 +#define HC_REG_PCI_CONFIG_0 0x108010 +#define HC_REG_PCI_CONFIG_1 0x108014 +#define HC_REG_STATISTIC_COUNTERS 0x109000 +#define HC_REG_TRAILING_EDGE_0 0x108044 +#define HC_REG_TRAILING_EDGE_1 0x10804c +#define HC_REG_UC_RAM_ADDR_0 0x108028 +#define HC_REG_UC_RAM_ADDR_1 0x108030 +#define HC_REG_USTORM_ADDR_FOR_COALESCE 0x108068 +#define HC_REG_VQID_0 0x108008 +#define HC_REG_VQID_1 0x10800c +#define IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN (0x1<<1) +#define IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE (0x1<<0) +#define IGU_REG_ATTENTION_ACK_BITS 0x130108 +/* [R 4] Debug: attn_fsm */ +#define IGU_REG_ATTN_FSM 0x130054 +#define IGU_REG_ATTN_MSG_ADDR_H 0x13011c +#define IGU_REG_ATTN_MSG_ADDR_L 0x130120 +/* [R 4] Debug: [3] - attention write done message is pending (0-no pending; + * 1-pending). [2:0] = PFID. Pending means attention message was sent; but + * write done didn't receive. */ +#define IGU_REG_ATTN_WRITE_DONE_PENDING 0x130030 +#define IGU_REG_BLOCK_CONFIGURATION 0x130000 +#define IGU_REG_COMMAND_REG_32LSB_DATA 0x130124 +#define IGU_REG_COMMAND_REG_CTRL 0x13012c +/* [WB_R 32] Cleanup bit status per SB. 1 = cleanup is set. 0 = cleanup bit + * is clear. The bits in this registers are set and clear via the producer + * command. Data valid only in addresses 0-4. all the rest are zero. */ +#define IGU_REG_CSTORM_TYPE_0_SB_CLEANUP 0x130200 +/* [R 5] Debug: ctrl_fsm */ +#define IGU_REG_CTRL_FSM 0x130064 +/* [R 1] data available for error memory. If this bit is clear do not red + * from error_handling_memory. */ +#define IGU_REG_ERROR_HANDLING_DATA_VALID 0x130130 +/* [RW 11] Parity mask register #0 read/write */ +#define IGU_REG_IGU_PRTY_MASK 0x1300a8 +/* [R 11] Parity register #0 read */ +#define IGU_REG_IGU_PRTY_STS 0x13009c +/* [RC 11] Parity register #0 read clear */ +#define IGU_REG_IGU_PRTY_STS_CLR 0x1300a0 +/* [R 4] Debug: int_handle_fsm */ +#define IGU_REG_INT_HANDLE_FSM 0x130050 +#define IGU_REG_LEADING_EDGE_LATCH 0x130134 +/* [RW 14] mapping CAM; relevant for E2 operating mode only. [0] - valid. + * [6:1] - vector number; [13:7] - FID (if VF - [13] = 0; [12:7] = VF + * number; if PF - [13] = 1; [12:10] = 0; [9:7] = PF number); */ +#define IGU_REG_MAPPING_MEMORY 0x131000 +#define IGU_REG_MAPPING_MEMORY_SIZE 136 +#define IGU_REG_PBA_STATUS_LSB 0x130138 +#define IGU_REG_PBA_STATUS_MSB 0x13013c +#define IGU_REG_PCI_PF_MSI_EN 0x130140 +#define IGU_REG_PCI_PF_MSIX_EN 0x130144 +#define IGU_REG_PCI_PF_MSIX_FUNC_MASK 0x130148 +/* [WB_R 32] Each bit represent the pending bits status for that SB. 0 = no + * pending; 1 = pending. Pendings means interrupt was asserted; and write + * done was not received. Data valid only in addresses 0-4. all the rest are + * zero. */ +#define IGU_REG_PENDING_BITS_STATUS 0x130300 +#define IGU_REG_PF_CONFIGURATION 0x130154 +/* [RW 20] producers only. E2 mode: address 0-135 match to the mapping + * memory; 136 - PF0 default prod; 137 PF1 default prod; 138 - PF2 default + * prod; 139 PF3 default prod; 140 - PF0 - ATTN prod; 141 - PF1 - ATTN prod; + * 142 - PF2 - ATTN prod; 143 - PF3 - ATTN prod; 144-147 reserved. E1.5 mode + * - In backward compatible mode; for non default SB; each even line in the + * memory holds the U producer and each odd line hold the C producer. The + * first 128 producer are for NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The + * last 20 producers are for the DSB for each PF. each PF has five segments + * (the order inside each segment is PF0; PF1; PF2; PF3) - 128-131 U prods; + * 132-135 C prods; 136-139 X prods; 140-143 T prods; 144-147 ATTN prods; */ +#define IGU_REG_PROD_CONS_MEMORY 0x132000 +/* [R 3] Debug: pxp_arb_fsm */ +#define IGU_REG_PXP_ARB_FSM 0x130068 +/* [RW 6] Write one for each bit will reset the appropriate memory. When the + * memory reset finished the appropriate bit will be clear. Bit 0 - mapping + * memory; Bit 1 - SB memory; Bit 2 - SB interrupt and mask register; Bit 3 + * - MSIX memory; Bit 4 - PBA memory; Bit 5 - statistics; */ +#define IGU_REG_RESET_MEMORIES 0x130158 +/* [R 4] Debug: sb_ctrl_fsm */ +#define IGU_REG_SB_CTRL_FSM 0x13004c +#define IGU_REG_SB_INT_BEFORE_MASK_LSB 0x13015c +#define IGU_REG_SB_INT_BEFORE_MASK_MSB 0x130160 +#define IGU_REG_SB_MASK_LSB 0x130164 +#define IGU_REG_SB_MASK_MSB 0x130168 +/* [RW 16] Number of command that were dropped without causing an interrupt + * due to: read access for WO BAR address; or write access for RO BAR + * address or any access for reserved address or PCI function error is set + * and address is not MSIX; PBA or cleanup */ +#define IGU_REG_SILENT_DROP 0x13016c +/* [RW 10] Number of MSI/MSIX/ATTN messages sent for the function: 0-63 - + * number of MSIX messages per VF; 64-67 - number of MSI/MSIX messages per + * PF; 68-71 number of ATTN messages per PF */ +#define IGU_REG_STATISTIC_NUM_MESSAGE_SENT 0x130800 +/* [RW 32] Number of cycles the timer mask masking the IGU interrupt when a + * timer mask command arrives. Value must be bigger than 100. */ +#define IGU_REG_TIMER_MASKING_VALUE 0x13003c +#define IGU_REG_TRAILING_EDGE_LATCH 0x130104 +#define IGU_REG_VF_CONFIGURATION 0x130170 +/* [WB_R 32] Each bit represent write done pending bits status for that SB + * (MSI/MSIX message was sent and write done was not received yet). 0 = + * clear; 1 = set. Data valid only in addresses 0-4. all the rest are zero. */ +#define IGU_REG_WRITE_DONE_PENDING 0x130480 +#define MCP_A_REG_MCPR_SCRATCH 0x3a0000 +#define MCP_REG_MCPR_CPU_PROGRAM_COUNTER 0x8501c +#define MCP_REG_MCPR_GP_INPUTS 0x800c0 +#define MCP_REG_MCPR_GP_OENABLE 0x800c8 +#define MCP_REG_MCPR_GP_OUTPUTS 0x800c4 +#define MCP_REG_MCPR_IMC_COMMAND 0x85900 +#define MCP_REG_MCPR_IMC_DATAREG0 0x85920 +#define MCP_REG_MCPR_IMC_SLAVE_CONTROL 0x85904 +#define MCP_REG_MCPR_CPU_PROGRAM_COUNTER 0x8501c +#define MCP_REG_MCPR_NVM_ACCESS_ENABLE 0x86424 +#define MCP_REG_MCPR_NVM_ADDR 0x8640c +#define MCP_REG_MCPR_NVM_CFG4 0x8642c +#define MCP_REG_MCPR_NVM_COMMAND 0x86400 +#define MCP_REG_MCPR_NVM_READ 0x86410 +#define MCP_REG_MCPR_NVM_SW_ARB 0x86420 +#define MCP_REG_MCPR_NVM_WRITE 0x86408 +#define MCP_REG_MCPR_SCRATCH 0xa0000 +#define MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK (0x1<<1) +#define MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK (0x1<<0) +/* [R 32] read first 32 bit after inversion of function 0. mapped as + follows: [0] NIG attention for function0; [1] NIG attention for + function1; [2] GPIO1 mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; + [6] GPIO1 function 1; [7] GPIO2 function 1; [8] GPIO3 function 1; [9] + GPIO4 function 1; [10] PCIE glue/PXP VPD event function0; [11] PCIE + glue/PXP VPD event function1; [12] PCIE glue/PXP Expansion ROM event0; + [13] PCIE glue/PXP Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] + MSI/X indication for mcp; [17] MSI/X indication for function 1; [18] BRB + Parity error; [19] BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw + interrupt; [22] SRC Parity error; [23] SRC Hw interrupt; [24] TSDM Parity + error; [25] TSDM Hw interrupt; [26] TCM Parity error; [27] TCM Hw + interrupt; [28] TSEMI Parity error; [29] TSEMI Hw interrupt; [30] PBF + Parity error; [31] PBF Hw interrupt; */ +#define MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 0xa42c +#define MISC_REG_AEU_AFTER_INVERT_1_FUNC_1 0xa430 +/* [R 32] read first 32 bit after inversion of mcp. mapped as follows: [0] + NIG attention for function0; [1] NIG attention for function1; [2] GPIO1 + mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1; + [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10] + PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event + function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP + Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for + mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19] + BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC + Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw + interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI + Parity error; [29] TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw + interrupt; */ +#define MISC_REG_AEU_AFTER_INVERT_1_MCP 0xa434 +/* [R 32] read second 32 bit after inversion of function 0. mapped as + follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM + Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw + interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity + error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw + interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] + NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; + [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw + interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM + Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI + Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM + Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw + interrupt; */ +#define MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 0xa438 +#define MISC_REG_AEU_AFTER_INVERT_2_FUNC_1 0xa43c +/* [R 32] read second 32 bit after inversion of mcp. mapped as follows: [0] + PBClient Parity error; [1] PBClient Hw interrupt; [2] QM Parity error; + [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw interrupt; + [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9] + XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12] + DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity + error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux + PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt; + [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error; + [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt; + [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error; + [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt; */ +#define MISC_REG_AEU_AFTER_INVERT_2_MCP 0xa440 +/* [R 32] read third 32 bit after inversion of function 0. mapped as + follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity + error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; [5] + PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw + interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity + error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) + Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16] + pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20] + MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23] + SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW + timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 + func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General + attn1; */ +#define MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 0xa444 +#define MISC_REG_AEU_AFTER_INVERT_3_FUNC_1 0xa448 +/* [R 32] read third 32 bit after inversion of mcp. mapped as follows: [0] + CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity error; [3] PXP + Hw interrupt; [4] PXPpciClockClient Parity error; [5] PXPpciClockClient + Hw interrupt; [6] CFC Parity error; [7] CFC Hw interrupt; [8] CDU Parity + error; [9] CDU Hw interrupt; [10] DMAE Parity error; [11] DMAE Hw + interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) Hw interrupt; [14] + MISC Parity error; [15] MISC Hw interrupt; [16] pxp_misc_mps_attn; [17] + Flash event; [18] SMB event; [19] MCP attn0; [20] MCP attn1; [21] SW + timers attn_1 func0; [22] SW timers attn_2 func0; [23] SW timers attn_3 + func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW timers attn_1 + func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 func1; [29] SW + timers attn_4 func1; [30] General attn0; [31] General attn1; */ +#define MISC_REG_AEU_AFTER_INVERT_3_MCP 0xa44c +/* [R 32] read fourth 32 bit after inversion of function 0. mapped as + follows: [0] General attn2; [1] General attn3; [2] General attn4; [3] + General attn5; [4] General attn6; [5] General attn7; [6] General attn8; + [7] General attn9; [8] General attn10; [9] General attn11; [10] General + attn12; [11] General attn13; [12] General attn14; [13] General attn15; + [14] General attn16; [15] General attn17; [16] General attn18; [17] + General attn19; [18] General attn20; [19] General attn21; [20] Main power + interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN + Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC + Latched timeout attention; [27] GRC Latched reserved access attention; + [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP + Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ +#define MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 0xa450 +#define MISC_REG_AEU_AFTER_INVERT_4_FUNC_1 0xa454 +/* [R 32] read fourth 32 bit after inversion of mcp. mapped as follows: [0] + General attn2; [1] General attn3; [2] General attn4; [3] General attn5; + [4] General attn6; [5] General attn7; [6] General attn8; [7] General + attn9; [8] General attn10; [9] General attn11; [10] General attn12; [11] + General attn13; [12] General attn14; [13] General attn15; [14] General + attn16; [15] General attn17; [16] General attn18; [17] General attn19; + [18] General attn20; [19] General attn21; [20] Main power interrupt; [21] + RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN Latched attn; [24] + RBCU Latched attn; [25] RBCP Latched attn; [26] GRC Latched timeout + attention; [27] GRC Latched reserved access attention; [28] MCP Latched + rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP Latched + ump_tx_parity; [31] MCP Latched scpad_parity; */ +#define MISC_REG_AEU_AFTER_INVERT_4_MCP 0xa458 +/* [R 32] Read fifth 32 bit after inversion of function 0. Mapped as + * follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC + * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6] + * CNIG attention (reserved); [7] CNIG parity (reserved); [31-8] Reserved; */ +#define MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 0xa700 +/* [W 14] write to this register results with the clear of the latched + signals; one in d0 clears RBCR latch; one in d1 clears RBCT latch; one in + d2 clears RBCN latch; one in d3 clears RBCU latch; one in d4 clears RBCP + latch; one in d5 clears GRC Latched timeout attention; one in d6 clears + GRC Latched reserved access attention; one in d7 clears Latched + rom_parity; one in d8 clears Latched ump_rx_parity; one in d9 clears + Latched ump_tx_parity; one in d10 clears Latched scpad_parity (both + ports); one in d11 clears pxpv_misc_mps_attn; one in d12 clears + pxp_misc_exp_rom_attn0; one in d13 clears pxp_misc_exp_rom_attn1; read + from this register return zero */ +#define MISC_REG_AEU_CLR_LATCH_SIGNAL 0xa45c +/* [RW 32] first 32b for enabling the output for function 0 output0. mapped + as follows: [0] NIG attention for function0; [1] NIG attention for + function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function + 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8] + GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event + function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP + Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14] + SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X + indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; + [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] + SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] + TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] + TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */ +#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0 0xa06c +#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1 0xa07c +#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2 0xa08c +#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_3 0xa09c +#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_5 0xa0bc +#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_6 0xa0cc +#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_7 0xa0dc +/* [RW 32] first 32b for enabling the output for function 1 output0. mapped + as follows: [0] NIG attention for function0; [1] NIG attention for + function1; [2] GPIO1 function 1; [3] GPIO2 function 1; [4] GPIO3 function + 1; [5] GPIO4 function 1; [6] GPIO1 function 1; [7] GPIO2 function 1; [8] + GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event + function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP + Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14] + SPIO4; [15] SPIO5; [16] MSI/X indication for function 1; [17] MSI/X + indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; + [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] + SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] + TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] + TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */ +#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 0xa10c +#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 0xa11c +#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 0xa12c +#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_3 0xa13c +#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_5 0xa15c +#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_6 0xa16c +#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_7 0xa17c +/* [RW 32] first 32b for enabling the output for close the gate nig. mapped + as follows: [0] NIG attention for function0; [1] NIG attention for + function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function + 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8] + GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event + function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP + Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14] + SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X + indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; + [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] + SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] + TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] + TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */ +#define MISC_REG_AEU_ENABLE1_NIG_0 0xa0ec +#define MISC_REG_AEU_ENABLE1_NIG_1 0xa18c +/* [RW 32] first 32b for enabling the output for close the gate pxp. mapped + as follows: [0] NIG attention for function0; [1] NIG attention for + function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function + 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8] + GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event + function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP + Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14] + SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X + indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; + [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] + SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] + TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] + TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */ +#define MISC_REG_AEU_ENABLE1_PXP_0 0xa0fc +#define MISC_REG_AEU_ENABLE1_PXP_1 0xa19c +/* [RW 32] second 32b for enabling the output for function 0 output0. mapped + as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM + Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw + interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity + error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw + interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] + NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; + [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw + interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM + Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI + Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM + Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw + interrupt; */ +#define MISC_REG_AEU_ENABLE2_FUNC_0_OUT_0 0xa070 +#define MISC_REG_AEU_ENABLE2_FUNC_0_OUT_1 0xa080 +/* [RW 32] second 32b for enabling the output for function 1 output0. mapped + as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM + Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw + interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity + error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw + interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] + NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; + [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw + interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM + Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI + Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM + Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw + interrupt; */ +#define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_0 0xa110 +#define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_1 0xa120 +/* [RW 32] second 32b for enabling the output for close the gate nig. mapped + as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM + Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw + interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity + error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw + interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] + NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; + [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw + interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM + Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI + Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM + Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw + interrupt; */ +#define MISC_REG_AEU_ENABLE2_NIG_0 0xa0f0 +#define MISC_REG_AEU_ENABLE2_NIG_1 0xa190 +/* [RW 32] second 32b for enabling the output for close the gate pxp. mapped + as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM + Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw + interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity + error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw + interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] + NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; + [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw + interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM + Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI + Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM + Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw + interrupt; */ +#define MISC_REG_AEU_ENABLE2_PXP_0 0xa100 +#define MISC_REG_AEU_ENABLE2_PXP_1 0xa1a0 +/* [RW 32] third 32b for enabling the output for function 0 output0. mapped + as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP + Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; + [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw + interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity + error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) + Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16] + pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20] + MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23] + SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW + timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 + func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General + attn1; */ +#define MISC_REG_AEU_ENABLE3_FUNC_0_OUT_0 0xa074 +#define MISC_REG_AEU_ENABLE3_FUNC_0_OUT_1 0xa084 +/* [RW 32] third 32b for enabling the output for function 1 output0. mapped + as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP + Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; + [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw + interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity + error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) + Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16] + pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20] + MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23] + SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW + timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 + func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General + attn1; */ +#define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_0 0xa114 +#define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_1 0xa124 +/* [RW 32] third 32b for enabling the output for close the gate nig. mapped + as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP + Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; + [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw + interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity + error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) + Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16] + pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20] + MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23] + SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW + timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 + func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General + attn1; */ +#define MISC_REG_AEU_ENABLE3_NIG_0 0xa0f4 +#define MISC_REG_AEU_ENABLE3_NIG_1 0xa194 +/* [RW 32] third 32b for enabling the output for close the gate pxp. mapped + as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP + Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; + [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw + interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity + error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) + Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16] + pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20] + MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23] + SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW + timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 + func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General + attn1; */ +#define MISC_REG_AEU_ENABLE3_PXP_0 0xa104 +#define MISC_REG_AEU_ENABLE3_PXP_1 0xa1a4 +/* [RW 32] fourth 32b for enabling the output for function 0 output0.mapped + as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3] + General attn5; [4] General attn6; [5] General attn7; [6] General attn8; + [7] General attn9; [8] General attn10; [9] General attn11; [10] General + attn12; [11] General attn13; [12] General attn14; [13] General attn15; + [14] General attn16; [15] General attn17; [16] General attn18; [17] + General attn19; [18] General attn20; [19] General attn21; [20] Main power + interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN + Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC + Latched timeout attention; [27] GRC Latched reserved access attention; + [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP + Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ +#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0 0xa078 +#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_2 0xa098 +#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_4 0xa0b8 +#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_5 0xa0c8 +#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_6 0xa0d8 +#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_7 0xa0e8 +/* [RW 32] fourth 32b for enabling the output for function 1 output0.mapped + as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3] + General attn5; [4] General attn6; [5] General attn7; [6] General attn8; + [7] General attn9; [8] General attn10; [9] General attn11; [10] General + attn12; [11] General attn13; [12] General attn14; [13] General attn15; + [14] General attn16; [15] General attn17; [16] General attn18; [17] + General attn19; [18] General attn20; [19] General attn21; [20] Main power + interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN + Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC + Latched timeout attention; [27] GRC Latched reserved access attention; + [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP + Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ +#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0 0xa118 +#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_2 0xa138 +#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_4 0xa158 +#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_5 0xa168 +#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_6 0xa178 +#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_7 0xa188 +/* [RW 32] fourth 32b for enabling the output for close the gate nig.mapped + as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3] + General attn5; [4] General attn6; [5] General attn7; [6] General attn8; + [7] General attn9; [8] General attn10; [9] General attn11; [10] General + attn12; [11] General attn13; [12] General attn14; [13] General attn15; + [14] General attn16; [15] General attn17; [16] General attn18; [17] + General attn19; [18] General attn20; [19] General attn21; [20] Main power + interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN + Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC + Latched timeout attention; [27] GRC Latched reserved access attention; + [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP + Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ +#define MISC_REG_AEU_ENABLE4_NIG_0 0xa0f8 +#define MISC_REG_AEU_ENABLE4_NIG_1 0xa198 +/* [RW 32] fourth 32b for enabling the output for close the gate pxp.mapped + as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3] + General attn5; [4] General attn6; [5] General attn7; [6] General attn8; + [7] General attn9; [8] General attn10; [9] General attn11; [10] General + attn12; [11] General attn13; [12] General attn14; [13] General attn15; + [14] General attn16; [15] General attn17; [16] General attn18; [17] + General attn19; [18] General attn20; [19] General attn21; [20] Main power + interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN + Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC + Latched timeout attention; [27] GRC Latched reserved access attention; + [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP + Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ +#define MISC_REG_AEU_ENABLE4_PXP_0 0xa108 +#define MISC_REG_AEU_ENABLE4_PXP_1 0xa1a8 ++/* [RW 32] fifth 32b for enabling the output for function 0 output0. Mapped ++ * as follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC ++ * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6] ++ * mstat0 attention; [7] mstat0 parity; [8] mstat1 attention; [9] mstat1 ++ * parity; [31-10] Reserved; */ ++#define MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0 0xa688 ++/* [RW 32] Fifth 32b for enabling the output for function 1 output0. Mapped ++ * as follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC ++ * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6] ++ * mstat0 attention; [7] mstat0 parity; [8] mstat1 attention; [9] mstat1 ++ * parity; [31-10] Reserved; */ ++#define MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 0xa6b0 +/* [RW 1] set/clr general attention 0; this will set/clr bit 94 in the aeu + 128 bit vector */ +#define MISC_REG_AEU_GENERAL_ATTN_0 0xa000 +#define MISC_REG_AEU_GENERAL_ATTN_1 0xa004 +#define MISC_REG_AEU_GENERAL_ATTN_10 0xa028 +#define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c +#define MISC_REG_AEU_GENERAL_ATTN_12 0xa030 +#define MISC_REG_AEU_GENERAL_ATTN_2 0xa008 +#define MISC_REG_AEU_GENERAL_ATTN_3 0xa00c +#define MISC_REG_AEU_GENERAL_ATTN_4 0xa010 +#define MISC_REG_AEU_GENERAL_ATTN_5 0xa014 +#define MISC_REG_AEU_GENERAL_ATTN_6 0xa018 +#define MISC_REG_AEU_GENERAL_ATTN_7 0xa01c +#define MISC_REG_AEU_GENERAL_ATTN_8 0xa020 +#define MISC_REG_AEU_GENERAL_ATTN_9 0xa024 +#define MISC_REG_AEU_GENERAL_MASK 0xa61c +/* [RW 32] first 32b for inverting the input for function 0; for each bit: + 0= do not invert; 1= invert; mapped as follows: [0] NIG attention for + function0; [1] NIG attention for function1; [2] GPIO1 mcp; [3] GPIO2 mcp; + [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1; [7] GPIO2 function 1; + [8] GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event + function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP + Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14] + SPIO4; [15] SPIO5; [16] MSI/X indication for mcp; [17] MSI/X indication + for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; [20] PRS + Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] SRC Hw + interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] TCM + Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] TSEMI + Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */ +#define MISC_REG_AEU_INVERTER_1_FUNC_0 0xa22c +#define MISC_REG_AEU_INVERTER_1_FUNC_1 0xa23c +/* [RW 32] second 32b for inverting the input for function 0; for each bit: + 0= do not invert; 1= invert. mapped as follows: [0] PBClient Parity + error; [1] PBClient Hw interrupt; [2] QM Parity error; [3] QM Hw + interrupt; [4] Timers Parity error; [5] Timers Hw interrupt; [6] XSDM + Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9] XCM Hw + interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12] + DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity + error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux + PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt; + [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error; + [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt; + [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error; + [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt; */ +#define MISC_REG_AEU_INVERTER_2_FUNC_0 0xa230 +#define MISC_REG_AEU_INVERTER_2_FUNC_1 0xa240 +/* [RW 10] [7:0] = mask 8 attention output signals toward IGU function0; + [9:8] = raserved. Zero = mask; one = unmask */ +#define MISC_REG_AEU_MASK_ATTN_FUNC_0 0xa060 +#define MISC_REG_AEU_MASK_ATTN_FUNC_1 0xa064 +/* [RW 1] If set a system kill occurred */ +#define MISC_REG_AEU_SYS_KILL_OCCURRED 0xa610 +/* [RW 32] Represent the status of the input vector to the AEU when a system + kill occurred. The register is reset in por reset. Mapped as follows: [0] + NIG attention for function0; [1] NIG attention for function1; [2] GPIO1 + mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1; + [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10] + PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event + function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP + Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for + mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19] + BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC + Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw + interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI + Parity error; [29] TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw + interrupt; */ +#define MISC_REG_AEU_SYS_KILL_STATUS_0 0xa600 +#define MISC_REG_AEU_SYS_KILL_STATUS_1 0xa604 +#define MISC_REG_AEU_SYS_KILL_STATUS_2 0xa608 +#define MISC_REG_AEU_SYS_KILL_STATUS_3 0xa60c +/* [R 4] This field indicates the type of the device. '0' - 2 Ports; '1' - 1 + Port. */ +#define MISC_REG_BOND_ID 0xa400 +/* [R 8] These bits indicate the metal revision of the chip. This value + starts at 0x00 for each all-layer tape-out and increments by one for each + tape-out. */ +#define MISC_REG_CHIP_METAL 0xa404 +/* [R 16] These bits indicate the part number for the chip. */ +#define MISC_REG_CHIP_NUM 0xa408 +/* [R 4] These bits indicate the base revision of the chip. This value + starts at 0x0 for the A0 tape-out and increments by one for each + all-layer tape-out. */ +#define MISC_REG_CHIP_REV 0xa40c +/* [RW 32] The following driver registers(1...16) represent 16 drivers and + 32 clients. Each client can be controlled by one driver only. One in each + bit represent that this driver control the appropriate client (Ex: bit 5 + is set means this driver control client number 5). addr1 = set; addr0 = + clear; read from both addresses will give the same result = status. write + to address 1 will set a request to control all the clients that their + appropriate bit (in the write command) is set. if the client is free (the + appropriate bit in all the other drivers is clear) one will be written to + that driver register; if the client isn't free the bit will remain zero. + if the appropriate bit is set (the driver request to gain control on a + client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW + interrupt will be asserted). write to address 0 will set a request to + free all the clients that their appropriate bit (in the write command) is + set. if the appropriate bit is clear (the driver request to free a client + it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will + be asserted). */ +#define MISC_REG_DRIVER_CONTROL_1 0xa510 +#define MISC_REG_DRIVER_CONTROL_7 0xa3c8 +/* [RW 1] e1hmf for WOL. If clr WOL signal o the PXP will be send on bit 0 + only. */ +#define MISC_REG_E1HMF_MODE 0xa5f8 +/* [R 1] Status of four port mode path swap input pin. */ +#define MISC_REG_FOUR_PORT_PATH_SWAP 0xa75c +/* [RW 2] 4 port path swap overwrite.[0] - Overwrite control; if it is 0 - + the path_swap output is equal to 4 port mode path swap input pin; if it + is 1 - the path_swap output is equal to bit[1] of this register; [1] - + Overwrite value. If bit[0] of this register is 1 this is the value that + receives the path_swap output. Reset on Hard reset. */ +#define MISC_REG_FOUR_PORT_PATH_SWAP_OVWR 0xa738 +/* [R 1] Status of 4 port mode port swap input pin. */ +#define MISC_REG_FOUR_PORT_PORT_SWAP 0xa754 +/* [RW 2] 4 port port swap overwrite.[0] - Overwrite control; if it is 0 - + the port_swap output is equal to 4 port mode port swap input pin; if it + is 1 - the port_swap output is equal to bit[1] of this register; [1] - + Overwrite value. If bit[0] of this register is 1 this is the value that + receives the port_swap output. Reset on Hard reset. */ +#define MISC_REG_FOUR_PORT_PORT_SWAP_OVWR 0xa734 +/* [RW 32] Debug only: spare RW register reset by core reset */ +#define MISC_REG_GENERIC_CR_0 0xa460 +#define MISC_REG_GENERIC_CR_1 0xa464 +/* [RW 32] Debug only: spare RW register reset by por reset */ +#define MISC_REG_GENERIC_POR_1 0xa474 +/* [RW 32] Bit[0]: EPIO MODE SEL: Setting this bit to 1 will allow SW/FW to + use all of the 32 Extended GPIO pins. Without setting this bit; an EPIO + can not be configured as an output. Each output has its output enable in + the MCP register space; but this bit needs to be set to make use of that. + Bit[3:1] spare. Bit[4]: WCVTMON_PWRDN: Powerdown for Warpcore VTMON. When + set to 1 - Powerdown. Bit[5]: WCVTMON_RESETB: Reset for Warpcore VTMON. + When set to 0 - vTMON is in reset. Bit[6]: setting this bit will change + the i/o to an output and will drive the TimeSync output. Bit[31:7]: + spare. Global register. Reset by hard reset. */ +#define MISC_REG_GEN_PURP_HWG 0xa9a0 +/* [RW 32] GPIO. [31-28] FLOAT port 0; [27-24] FLOAT port 0; When any of + these bits is written as a '1'; the corresponding SPIO bit will turn off + it's drivers and become an input. This is the reset state of all GPIO + pins. The read value of these bits will be a '1' if that last command + (#SET; #CLR; or #FLOAT) for this bit was a #FLOAT. (reset value 0xff). + [23-20] CLR port 1; 19-16] CLR port 0; When any of these bits is written + as a '1'; the corresponding GPIO bit will drive low. The read value of + these bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for + this bit was a #CLR. (reset value 0). [15-12] SET port 1; 11-8] port 0; + SET When any of these bits is written as a '1'; the corresponding GPIO + bit will drive high (if it has that capability). The read value of these + bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for this + bit was a #SET. (reset value 0). [7-4] VALUE port 1; [3-0] VALUE port 0; + RO; These bits indicate the read value of each of the eight GPIO pins. + This is the result value of the pin; not the drive value. Writing these + bits will have not effect. */ +#define MISC_REG_GPIO 0xa490 +/* [RW 8] These bits enable the GPIO_INTs to signals event to the + IGU/MCP.according to the following map: [0] p0_gpio_0; [1] p0_gpio_1; [2] + p0_gpio_2; [3] p0_gpio_3; [4] p1_gpio_0; [5] p1_gpio_1; [6] p1_gpio_2; + [7] p1_gpio_3; */ +#define MISC_REG_GPIO_EVENT_EN 0xa2bc +/* [RW 32] GPIO INT. [31-28] OLD_CLR port1; [27-24] OLD_CLR port0; Writing a + '1' to these bit clears the corresponding bit in the #OLD_VALUE register. + This will acknowledge an interrupt on the falling edge of corresponding + GPIO input (reset value 0). [23-16] OLD_SET [23-16] port1; OLD_SET port0; + Writing a '1' to these bit sets the corresponding bit in the #OLD_VALUE + register. This will acknowledge an interrupt on the rising edge of + corresponding SPIO input (reset value 0). [15-12] OLD_VALUE [11-8] port1; + OLD_VALUE port0; RO; These bits indicate the old value of the GPIO input + value. When the ~INT_STATE bit is set; this bit indicates the OLD value + of the pin such that if ~INT_STATE is set and this bit is '0'; then the + interrupt is due to a low to high edge. If ~INT_STATE is set and this bit + is '1'; then the interrupt is due to a high to low edge (reset value 0). + [7-4] INT_STATE port1; [3-0] INT_STATE RO port0; These bits indicate the + current GPIO interrupt state for each GPIO pin. This bit is cleared when + the appropriate #OLD_SET or #OLD_CLR command bit is written. This bit is + set when the GPIO input does not match the current value in #OLD_VALUE + (reset value 0). */ +#define MISC_REG_GPIO_INT 0xa494 +/* [R 28] this field hold the last information that caused reserved + attention. bits [19:0] - address; [22:20] function; [23] reserved; + [27:24] the master that caused the attention - according to the following + encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 = + dbu; 8 = dmae */ +#define MISC_REG_GRC_RSV_ATTN 0xa3c0 +/* [R 28] this field hold the last information that caused timeout + attention. bits [19:0] - address; [22:20] function; [23] reserved; + [27:24] the master that caused the attention - according to the following + encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 = + dbu; 8 = dmae */ +#define MISC_REG_GRC_TIMEOUT_ATTN 0xa3c4 +/* [RW 1] Setting this bit enables a timer in the GRC block to timeout any + access that does not finish within + ~misc_registers_grc_timout_val.grc_timeout_val cycles. When this bit is + cleared; this timeout is disabled. If this timeout occurs; the GRC shall + assert it attention output. */ +#define MISC_REG_GRC_TIMEOUT_EN 0xa280 +/* [RW 28] 28 LSB of LCPLL first register; reset val = 521. inside order of + the bits is: [2:0] OAC reset value 001) CML output buffer bias control; + 111 for +40%; 011 for +20%; 001 for 0%; 000 for -20%. [5:3] Icp_ctrl + (reset value 001) Charge pump current control; 111 for 720u; 011 for + 600u; 001 for 480u and 000 for 360u. [7:6] Bias_ctrl (reset value 00) + Global bias control; When bit 7 is high bias current will be 10 0gh; When + bit 6 is high bias will be 100w; Valid values are 00; 10; 01. [10:8] + Pll_observe (reset value 010) Bits to control observability. bit 10 is + for test bias; bit 9 is for test CK; bit 8 is test Vc. [12:11] Vth_ctrl + (reset value 00) Comparator threshold control. 00 for 0.6V; 01 for 0.54V + and 10 for 0.66V. [13] pllSeqStart (reset value 0) Enables VCO tuning + sequencer: 1= sequencer disabled; 0= sequencer enabled (inverted + internally). [14] reserved (reset value 0) Reset for VCO sequencer is + connected to RESET input directly. [15] capRetry_en (reset value 0) + enable retry on cap search failure (inverted). [16] freqMonitor_e (reset + value 0) bit to continuously monitor vco freq (inverted). [17] + freqDetRestart_en (reset value 0) bit to enable restart when not freq + locked (inverted). [18] freqDetRetry_en (reset value 0) bit to enable + retry on freq det failure(inverted). [19] pllForceFdone_en (reset value + 0) bit to enable pllForceFdone & pllForceFpass into pllSeq. [20] + pllForceFdone (reset value 0) bit to force freqDone. [21] pllForceFpass + (reset value 0) bit to force freqPass. [22] pllForceDone_en (reset value + 0) bit to enable pllForceCapDone. [23] pllForceCapDone (reset value 0) + bit to force capDone. [24] pllForceCapPass_en (reset value 0) bit to + enable pllForceCapPass. [25] pllForceCapPass (reset value 0) bit to force + capPass. [26] capRestart (reset value 0) bit to force cap sequencer to + restart. [27] capSelectM_en (reset value 0) bit to enable cap select + register bits. */ +#define MISC_REG_LCPLL_CTRL_1 0xa2a4 +#define MISC_REG_LCPLL_CTRL_REG_2 0xa2a8 +/* [RW 4] Interrupt mask register #0 read/write */ +#define MISC_REG_MISC_INT_MASK 0xa388 +/* [RW 1] Parity mask register #0 read/write */ +#define MISC_REG_MISC_PRTY_MASK 0xa398 +/* [R 1] Parity register #0 read */ +#define MISC_REG_MISC_PRTY_STS 0xa38c +/* [RC 1] Parity register #0 read clear */ +#define MISC_REG_MISC_PRTY_STS_CLR 0xa390 +#define MISC_REG_NIG_WOL_P0 0xa270 +#define MISC_REG_NIG_WOL_P1 0xa274 +/* [R 1] If set indicate that the pcie_rst_b was asserted without perst + assertion */ +#define MISC_REG_PCIE_HOT_RESET 0xa618 +/* [RW 32] 32 LSB of storm PLL first register; reset val = 0x 071d2911. + inside order of the bits is: [0] P1 divider[0] (reset value 1); [1] P1 + divider[1] (reset value 0); [2] P1 divider[2] (reset value 0); [3] P1 + divider[3] (reset value 0); [4] P2 divider[0] (reset value 1); [5] P2 + divider[1] (reset value 0); [6] P2 divider[2] (reset value 0); [7] P2 + divider[3] (reset value 0); [8] ph_det_dis (reset value 1); [9] + freq_det_dis (reset value 0); [10] Icpx[0] (reset value 0); [11] Icpx[1] + (reset value 1); [12] Icpx[2] (reset value 0); [13] Icpx[3] (reset value + 1); [14] Icpx[4] (reset value 0); [15] Icpx[5] (reset value 0); [16] + Rx[0] (reset value 1); [17] Rx[1] (reset value 0); [18] vc_en (reset + value 1); [19] vco_rng[0] (reset value 1); [20] vco_rng[1] (reset value + 1); [21] Kvco_xf[0] (reset value 0); [22] Kvco_xf[1] (reset value 0); + [23] Kvco_xf[2] (reset value 0); [24] Kvco_xs[0] (reset value 1); [25] + Kvco_xs[1] (reset value 1); [26] Kvco_xs[2] (reset value 1); [27] + testd_en (reset value 0); [28] testd_sel[0] (reset value 0); [29] + testd_sel[1] (reset value 0); [30] testd_sel[2] (reset value 0); [31] + testa_en (reset value 0); */ +#define MISC_REG_PLL_STORM_CTRL_1 0xa294 +#define MISC_REG_PLL_STORM_CTRL_2 0xa298 +#define MISC_REG_PLL_STORM_CTRL_3 0xa29c +#define MISC_REG_PLL_STORM_CTRL_4 0xa2a0 +/* [R 1] Status of 4 port mode enable input pin. */ +#define MISC_REG_PORT4MODE_EN 0xa750 +/* [RW 2] 4 port mode enable overwrite.[0] - Overwrite control; if it is 0 - + * the port4mode_en output is equal to 4 port mode input pin; if it is 1 - + * the port4mode_en output is equal to bit[1] of this register; [1] - + * Overwrite value. If bit[0] of this register is 1 this is the value that + * receives the port4mode_en output . */ +#define MISC_REG_PORT4MODE_EN_OVWR 0xa720 +/* [RW 32] reset reg#2; rite/read one = the specific block is out of reset; + write/read zero = the specific block is in reset; addr 0-wr- the write + value will be written to the register; addr 1-set - one will be written + to all the bits that have the value of one in the data written (bits that + have the value of zero will not be change) ; addr 2-clear - zero will be + written to all the bits that have the value of one in the data written + (bits that have the value of zero will not be change); addr 3-ignore; + read ignore from all addr except addr 00; inside order of the bits is: + [0] rst_bmac0; [1] rst_bmac1; [2] rst_emac0; [3] rst_emac1; [4] rst_grc; + [5] rst_mcp_n_reset_reg_hard_core; [6] rst_ mcp_n_hard_core_rst_b; [7] + rst_ mcp_n_reset_cmn_cpu; [8] rst_ mcp_n_reset_cmn_core; [9] rst_rbcn; + [10] rst_dbg; [11] rst_misc_core; [12] rst_dbue (UART); [13] + Pci_resetmdio_n; [14] rst_emac0_hard_core; [15] rst_emac1_hard_core; 16] + rst_pxp_rq_rd_wr; 31:17] reserved */ +#define MISC_REG_RESET_REG_2 0xa590 +/* [RW 20] 20 bit GRC address where the scratch-pad of the MCP that is + shared with the driver resides */ +#define MISC_REG_SHARED_MEM_ADDR 0xa2b4 +/* [RW 32] SPIO. [31-24] FLOAT When any of these bits is written as a '1'; + the corresponding SPIO bit will turn off it's drivers and become an + input. This is the reset state of all SPIO pins. The read value of these + bits will be a '1' if that last command (#SET; #CL; or #FLOAT) for this + bit was a #FLOAT. (reset value 0xff). [23-16] CLR When any of these bits + is written as a '1'; the corresponding SPIO bit will drive low. The read + value of these bits will be a '1' if that last command (#SET; #CLR; or +#FLOAT) for this bit was a #CLR. (reset value 0). [15-8] SET When any of + these bits is written as a '1'; the corresponding SPIO bit will drive + high (if it has that capability). The read value of these bits will be a + '1' if that last command (#SET; #CLR; or #FLOAT) for this bit was a #SET. + (reset value 0). [7-0] VALUE RO; These bits indicate the read value of + each of the eight SPIO pins. This is the result value of the pin; not the + drive value. Writing these bits will have not effect. Each 8 bits field + is divided as follows: [0] VAUX Enable; when pulsed low; enables supply + from VAUX. (This is an output pin only; the FLOAT field is not applicable + for this pin); [1] VAUX Disable; when pulsed low; disables supply form + VAUX. (This is an output pin only; FLOAT field is not applicable for this + pin); [2] SEL_VAUX_B - Control to power switching logic. Drive low to + select VAUX supply. (This is an output pin only; it is not controlled by + the SET and CLR fields; it is controlled by the Main Power SM; the FLOAT + field is not applicable for this pin; only the VALUE fields is relevant - + it reflects the output value); [3] port swap [4] spio_4; [5] spio_5; [6] + Bit 0 of UMP device ID select; read by UMP firmware; [7] Bit 1 of UMP + device ID select; read by UMP firmware. */ +#define MISC_REG_SPIO 0xa4fc +/* [RW 8] These bits enable the SPIO_INTs to signals event to the IGU/MC. + according to the following map: [3:0] reserved; [4] spio_4 [5] spio_5; + [7:0] reserved */ +#define MISC_REG_SPIO_EVENT_EN 0xa2b8 +/* [RW 32] SPIO INT. [31-24] OLD_CLR Writing a '1' to these bit clears the + corresponding bit in the #OLD_VALUE register. This will acknowledge an + interrupt on the falling edge of corresponding SPIO input (reset value + 0). [23-16] OLD_SET Writing a '1' to these bit sets the corresponding bit + in the #OLD_VALUE register. This will acknowledge an interrupt on the + rising edge of corresponding SPIO input (reset value 0). [15-8] OLD_VALUE + RO; These bits indicate the old value of the SPIO input value. When the + ~INT_STATE bit is set; this bit indicates the OLD value of the pin such + that if ~INT_STATE is set and this bit is '0'; then the interrupt is due + to a low to high edge. If ~INT_STATE is set and this bit is '1'; then the + interrupt is due to a high to low edge (reset value 0). [7-0] INT_STATE + RO; These bits indicate the current SPIO interrupt state for each SPIO + pin. This bit is cleared when the appropriate #OLD_SET or #OLD_CLR + command bit is written. This bit is set when the SPIO input does not + match the current value in #OLD_VALUE (reset value 0). */ +#define MISC_REG_SPIO_INT 0xa500 +/* [RW 32] reload value for counter 4 if reload; the value will be reload if + the counter reached zero and the reload bit + (~misc_registers_sw_timer_cfg_4.sw_timer_cfg_4[1] ) is set */ +#define MISC_REG_SW_TIMER_RELOAD_VAL_4 0xa2fc +/* [RW 32] the value of the counter for sw timers1-8. there are 8 addresses + in this register. address 0 - timer 1; address 1 - timer 2, ... address 7 - + timer 8 */ +#define MISC_REG_SW_TIMER_VAL 0xa5c0 +/* [R 1] Status of two port mode path swap input pin. */ +#define MISC_REG_TWO_PORT_PATH_SWAP 0xa758 +/* [RW 2] 2 port swap overwrite.[0] - Overwrite control; if it is 0 - the + path_swap output is equal to 2 port mode path swap input pin; if it is 1 + - the path_swap output is equal to bit[1] of this register; [1] - + Overwrite value. If bit[0] of this register is 1 this is the value that + receives the path_swap output. Reset on Hard reset. */ +#define MISC_REG_TWO_PORT_PATH_SWAP_OVWR 0xa72c +/* [RW 1] Set by the MCP to remember if one or more of the drivers is/are + loaded; 0-prepare; -unprepare */ +#define MISC_REG_UNPREPARED 0xa424 +#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_BRCST (0x1<<0) +#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_MLCST (0x1<<1) +#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_NO_VLAN (0x1<<4) +#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_UNCST (0x1<<2) +#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_VLAN (0x1<<3) +/* [RW 5] MDIO PHY Address. The WC uses this address to determine whether or + * not it is the recipient of the message on the MDIO interface. The value + * is compared to the value on ctrl_md_devad. Drives output + * misc_xgxs0_phy_addr. Global register. */ +#define MISC_REG_WC0_CTRL_PHY_ADDR 0xa9cc +/* [RW 2] XMAC Core port mode. Indicates the number of ports on the system + side. This should be less than or equal to phy_port_mode; if some of the + ports are not used. This enables reduction of frequency on the core side. + This is a strap input for the XMAC_MP core. 00 - Single Port Mode; 01 - + Dual Port Mode; 10 - Tri Port Mode; 11 - Quad Port Mode. This is a strap + input for the XMAC_MP core; and should be changed only while reset is + held low. Reset on Hard reset. */ +#define MISC_REG_XMAC_CORE_PORT_MODE 0xa964 +/* [RW 2] XMAC PHY port mode. Indicates the number of ports on the Warp + Core. This is a strap input for the XMAC_MP core. 00 - Single Port Mode; + 01 - Dual Port Mode; 1x - Quad Port Mode; This is a strap input for the + XMAC_MP core; and should be changed only while reset is held low. Reset + on Hard reset. */ +#define MISC_REG_XMAC_PHY_PORT_MODE 0xa960 +/* [RW 32] 1 [47] Packet Size = 64 Write to this register write bits 31:0. + * Reads from this register will clear bits 31:0. */ +#define MSTAT_REG_RX_STAT_GR64_LO 0x200 +/* [RW 32] 1 [00] Tx Good Packet Count Write to this register write bits + * 31:0. Reads from this register will clear bits 31:0. */ +#define MSTAT_REG_TX_STAT_GTXPOK_LO 0 +#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_BRCST (0x1<<0) +#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_MLCST (0x1<<1) +#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_NO_VLAN (0x1<<4) +#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_UNCST (0x1<<2) +#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_VLAN (0x1<<3) +#define NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN (0x1<<0) +#define NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN (0x1<<0) +#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT (0x1<<0) +#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS (0x1<<9) +#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G (0x1<<15) +#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK_STATUS (0xf<<18) +/* [RW 1] Input enable for RX_BMAC0 IF */ +#define NIG_REG_BMAC0_IN_EN 0x100ac +/* [RW 1] output enable for TX_BMAC0 IF */ +#define NIG_REG_BMAC0_OUT_EN 0x100e0 +/* [RW 1] output enable for TX BMAC pause port 0 IF */ +#define NIG_REG_BMAC0_PAUSE_OUT_EN 0x10110 +/* [RW 1] output enable for RX_BMAC0_REGS IF */ +#define NIG_REG_BMAC0_REGS_OUT_EN 0x100e8 +/* [RW 1] output enable for RX BRB1 port0 IF */ +#define NIG_REG_BRB0_OUT_EN 0x100f8 +/* [RW 1] Input enable for TX BRB1 pause port 0 IF */ +#define NIG_REG_BRB0_PAUSE_IN_EN 0x100c4 +/* [RW 1] output enable for RX BRB1 port1 IF */ +#define NIG_REG_BRB1_OUT_EN 0x100fc +/* [RW 1] Input enable for TX BRB1 pause port 1 IF */ +#define NIG_REG_BRB1_PAUSE_IN_EN 0x100c8 +/* [RW 1] output enable for RX BRB1 LP IF */ +#define NIG_REG_BRB_LB_OUT_EN 0x10100 +/* [WB_W 82] Debug packet to LP from RBC; Data spelling:[63:0] data; 64] + error; [67:65]eop_bvalid; [68]eop; [69]sop; [70]port_id; 71]flush; + 72:73]-vnic_num; 81:74]-sideband_info */ +#define NIG_REG_DEBUG_PACKET_LB 0x10800 +/* [RW 1] Input enable for TX Debug packet */ +#define NIG_REG_EGRESS_DEBUG_IN_EN 0x100dc +/* [RW 1] If 1 - egress drain mode for port0 is active. In this mode all + packets from PBFare not forwarded to the MAC and just deleted from FIFO. + First packet may be deleted from the middle. And last packet will be + always deleted till the end. */ +#define NIG_REG_EGRESS_DRAIN0_MODE 0x10060 +/* [RW 1] Output enable to EMAC0 */ +#define NIG_REG_EGRESS_EMAC0_OUT_EN 0x10120 +/* [RW 1] MAC configuration for packets of port0. If 1 - all packet outputs + to emac for port0; other way to bmac for port0 */ +#define NIG_REG_EGRESS_EMAC0_PORT 0x10058 +/* [RW 1] Input enable for TX PBF user packet port0 IF */ +#define NIG_REG_EGRESS_PBF0_IN_EN 0x100cc +/* [RW 1] Input enable for TX PBF user packet port1 IF */ +#define NIG_REG_EGRESS_PBF1_IN_EN 0x100d0 +/* [RW 1] Input enable for TX UMP management packet port0 IF */ +#define NIG_REG_EGRESS_UMP0_IN_EN 0x100d4 +/* [RW 1] Input enable for RX_EMAC0 IF */ +#define NIG_REG_EMAC0_IN_EN 0x100a4 +/* [RW 1] output enable for TX EMAC pause port 0 IF */ +#define NIG_REG_EMAC0_PAUSE_OUT_EN 0x10118 +/* [R 1] status from emac0. This bit is set when MDINT from either the + EXT_MDINT pin or from the Copper PHY is driven low. This condition must + be cleared in the attached PHY device that is driving the MINT pin. */ +#define NIG_REG_EMAC0_STATUS_MISC_MI_INT 0x10494 +/* [WB 48] This address space contains BMAC0 registers. The BMAC registers + are described in appendix A. In order to access the BMAC0 registers; the + base address; NIG_REGISTERS_INGRESS_BMAC0_MEM; Offset: 0x10c00; should be + added to each BMAC register offset */ +#define NIG_REG_INGRESS_BMAC0_MEM 0x10c00 +/* [WB 48] This address space contains BMAC1 registers. The BMAC registers + are described in appendix A. In order to access the BMAC0 registers; the + base address; NIG_REGISTERS_INGRESS_BMAC1_MEM; Offset: 0x11000; should be + added to each BMAC register offset */ +#define NIG_REG_INGRESS_BMAC1_MEM 0x11000 +/* [R 1] FIFO empty in EOP descriptor FIFO of LP in NIG_RX_EOP */ +#define NIG_REG_INGRESS_EOP_LB_EMPTY 0x104e0 +/* [RW 17] Debug only. RX_EOP_DSCR_lb_FIFO in NIG_RX_EOP. Data + packet_length[13:0]; mac_error[14]; trunc_error[15]; parity[16] */ +#define NIG_REG_INGRESS_EOP_LB_FIFO 0x104e4 +/* [RW 27] 0 - must be active for Everest A0; 1- for Everest B0 when latch + logic for interrupts must be used. Enable per bit of interrupt of + ~latch_status.latch_status */ +#define NIG_REG_LATCH_BC_0 0x16210 +/* [RW 27] Latch for each interrupt from Unicore.b[0] + status_emac0_misc_mi_int; b[1] status_emac0_misc_mi_complete; + b[2]status_emac0_misc_cfg_change; b[3]status_emac0_misc_link_status; + b[4]status_emac0_misc_link_change; b[5]status_emac0_misc_attn; + b[6]status_serdes0_mac_crs; b[7]status_serdes0_autoneg_complete; + b[8]status_serdes0_fiber_rxact; b[9]status_serdes0_link_status; + b[10]status_serdes0_mr_page_rx; b[11]status_serdes0_cl73_an_complete; + b[12]status_serdes0_cl73_mr_page_rx; b[13]status_serdes0_rx_sigdet; + b[14]status_xgxs0_remotemdioreq; b[15]status_xgxs0_link10g; + b[16]status_xgxs0_autoneg_complete; b[17]status_xgxs0_fiber_rxact; + b[21:18]status_xgxs0_link_status; b[22]status_xgxs0_mr_page_rx; + b[23]status_xgxs0_cl73_an_complete; b[24]status_xgxs0_cl73_mr_page_rx; + b[25]status_xgxs0_rx_sigdet; b[26]status_xgxs0_mac_crs */ +#define NIG_REG_LATCH_STATUS_0 0x18000 +/* [RW 1] led 10g for port 0 */ +#define NIG_REG_LED_10G_P0 0x10320 +/* [RW 1] led 10g for port 1 */ +#define NIG_REG_LED_10G_P1 0x10324 +/* [RW 1] Port0: This bit is set to enable the use of the + ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 field + defined below. If this bit is cleared; then the blink rate will be about + 8Hz. */ +#define NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 0x10318 +/* [RW 12] Port0: Specifies the period of each blink cycle (on + off) for + Traffic LED in milliseconds. Must be a non-zero value. This 12-bit field + is reset to 0x080; giving a default blink period of approximately 8Hz. */ +#define NIG_REG_LED_CONTROL_BLINK_RATE_P0 0x10310 +/* [RW 1] Port0: If set along with the + ~nig_registers_led_control_override_traffic_p0.led_control_override_traffic_p0 + bit and ~nig_registers_led_control_traffic_p0.led_control_traffic_p0 LED + bit; the Traffic LED will blink with the blink rate specified in + ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and + ~nig_registers_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0 + fields. */ +#define NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0 0x10308 +/* [RW 1] Port0: If set overrides hardware control of the Traffic LED. The + Traffic LED will then be controlled via bit ~nig_registers_ + led_control_traffic_p0.led_control_traffic_p0 and bit + ~nig_registers_led_control_blink_traffic_p0.led_control_blink_traffic_p0 */ +#define NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 0x102f8 +/* [RW 1] Port0: If set along with the led_control_override_trafic_p0 bit; + turns on the Traffic LED. If the led_control_blink_traffic_p0 bit is also + set; the LED will blink with blink rate specified in + ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and + ~nig_regsters_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0 + fields. */ +#define NIG_REG_LED_CONTROL_TRAFFIC_P0 0x10300 +/* [RW 4] led mode for port0: 0 MAC; 1-3 PHY1; 4 MAC2; 5-7 PHY4; 8-MAC3; + 9-11PHY7; 12 MAC4; 13-15 PHY10; */ +#define NIG_REG_LED_MODE_P0 0x102f0 +/* [RW 3] for port0 enable for llfc ppp and pause. b0 - brb1 enable; b1- + tsdm enable; b2- usdm enable */ +#define NIG_REG_LLFC_EGRESS_SRC_ENABLE_0 0x16070 +#define NIG_REG_LLFC_EGRESS_SRC_ENABLE_1 0x16074 +/* [RW 1] SAFC enable for port0. This register may get 1 only when + ~ppp_enable.ppp_enable = 0 and pause_enable.pause_enable =0 for the same + port */ +#define NIG_REG_LLFC_ENABLE_0 0x16208 +#define NIG_REG_LLFC_ENABLE_1 0x1620c +/* [RW 16] classes are high-priority for port0 */ +#define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_0 0x16058 +#define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_1 0x1605c +/* [RW 16] classes are low-priority for port0 */ +#define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_0 0x16060 +#define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_1 0x16064 +/* [RW 1] Output enable of message to LLFC BMAC IF for port0 */ +#define NIG_REG_LLFC_OUT_EN_0 0x160c8 +#define NIG_REG_LLFC_OUT_EN_1 0x160cc +#define NIG_REG_LLH0_ACPI_PAT_0_CRC 0x1015c +#define NIG_REG_LLH0_ACPI_PAT_6_LEN 0x10154 +#define NIG_REG_LLH0_BRB1_DRV_MASK 0x10244 +#define NIG_REG_LLH0_BRB1_DRV_MASK_MF 0x16048 +/* [RW 1] send to BRB1 if no match on any of RMP rules. */ +#define NIG_REG_LLH0_BRB1_NOT_MCP 0x1025c +/* [RW 2] Determine the classification participants. 0: no classification.1: + classification upon VLAN id. 2: classification upon MAC address. 3: + classification upon both VLAN id & MAC addr. */ +#define NIG_REG_LLH0_CLS_TYPE 0x16080 +/* [RW 32] cm header for llh0 */ +#define NIG_REG_LLH0_CM_HEADER 0x1007c +#define NIG_REG_LLH0_DEST_IP_0_1 0x101dc +#define NIG_REG_LLH0_DEST_MAC_0_0 0x101c0 +/* [RW 16] destination TCP address 1. The LLH will look for this address in + all incoming packets. */ +#define NIG_REG_LLH0_DEST_TCP_0 0x10220 +/* [RW 16] destination UDP address 1 The LLH will look for this address in + all incoming packets. */ +#define NIG_REG_LLH0_DEST_UDP_0 0x10214 +#define NIG_REG_LLH0_ERROR_MASK 0x1008c +/* [RW 8] event id for llh0 */ +#define NIG_REG_LLH0_EVENT_ID 0x10084 +#define NIG_REG_LLH0_FUNC_EN 0x160fc +#define NIG_REG_LLH0_FUNC_MEM 0x16180 +#define NIG_REG_LLH0_FUNC_MEM_ENABLE 0x16140 +#define NIG_REG_LLH0_FUNC_VLAN_ID 0x16100 +/* [RW 1] Determine the IP version to look for in + ~nig_registers_llh0_dest_ip_0.llh0_dest_ip_0. 0 - IPv6; 1-IPv4 */ +#define NIG_REG_LLH0_IPV4_IPV6_0 0x10208 +/* [RW 1] t bit for llh0 */ +#define NIG_REG_LLH0_T_BIT 0x10074 +/* [RW 12] VLAN ID 1. In case of VLAN packet the LLH will look for this ID. */ +#define NIG_REG_LLH0_VLAN_ID_0 0x1022c +/* [RW 8] init credit counter for port0 in LLH */ +#define NIG_REG_LLH0_XCM_INIT_CREDIT 0x10554 +#define NIG_REG_LLH0_XCM_MASK 0x10130 +#define NIG_REG_LLH1_BRB1_DRV_MASK 0x10248 +/* [RW 1] send to BRB1 if no match on any of RMP rules. */ +#define NIG_REG_LLH1_BRB1_NOT_MCP 0x102dc +/* [RW 2] Determine the classification participants. 0: no classification.1: + classification upon VLAN id. 2: classification upon MAC address. 3: + classification upon both VLAN id & MAC addr. */ +#define NIG_REG_LLH1_CLS_TYPE 0x16084 +/* [RW 32] cm header for llh1 */ +#define NIG_REG_LLH1_CM_HEADER 0x10080 +#define NIG_REG_LLH1_ERROR_MASK 0x10090 +/* [RW 8] event id for llh1 */ +#define NIG_REG_LLH1_EVENT_ID 0x10088 +#define NIG_REG_LLH1_FUNC_MEM 0x161c0 +#define NIG_REG_LLH1_FUNC_MEM_ENABLE 0x16160 +#define NIG_REG_LLH1_FUNC_MEM_SIZE 16 +/* [RW 1] When this bit is set; the LLH will classify the packet before + * sending it to the BRB or calculating WoL on it. This bit controls port 1 + * only. The legacy llh_multi_function_mode bit controls port 0. */ +#define NIG_REG_LLH1_MF_MODE 0x18614 +/* [RW 8] init credit counter for port1 in LLH */ +#define NIG_REG_LLH1_XCM_INIT_CREDIT 0x10564 +#define NIG_REG_LLH1_XCM_MASK 0x10134 +/* [RW 1] When this bit is set; the LLH will expect all packets to be with + e1hov */ +#define NIG_REG_LLH_E1HOV_MODE 0x160d8 +/* [RW 1] When this bit is set; the LLH will classify the packet before + sending it to the BRB or calculating WoL on it. */ +#define NIG_REG_LLH_MF_MODE 0x16024 +#define NIG_REG_MASK_INTERRUPT_PORT0 0x10330 +#define NIG_REG_MASK_INTERRUPT_PORT1 0x10334 +/* [RW 1] Output signal from NIG to EMAC0. When set enables the EMAC0 block. */ +#define NIG_REG_NIG_EMAC0_EN 0x1003c +/* [RW 1] Output signal from NIG to EMAC1. When set enables the EMAC1 block. */ +#define NIG_REG_NIG_EMAC1_EN 0x10040 +/* [RW 1] Output signal from NIG to TX_EMAC0. When set indicates to the + EMAC0 to strip the CRC from the ingress packets. */ +#define NIG_REG_NIG_INGRESS_EMAC0_NO_CRC 0x10044 +/* [R 32] Interrupt register #0 read */ +#define NIG_REG_NIG_INT_STS_0 0x103b0 +#define NIG_REG_NIG_INT_STS_1 0x103c0 +/* [R 32] Legacy E1 and E1H location for parity error mask register. */ +#define NIG_REG_NIG_PRTY_MASK 0x103dc +/* [RW 32] Parity mask register #0 read/write */ +#define NIG_REG_NIG_PRTY_MASK_0 0x183c8 +#define NIG_REG_NIG_PRTY_MASK_1 0x183d8 +/* [R 32] Legacy E1 and E1H location for parity error status register. */ +#define NIG_REG_NIG_PRTY_STS 0x103d0 +/* [R 32] Parity register #0 read */ +#define NIG_REG_NIG_PRTY_STS_0 0x183bc +#define NIG_REG_NIG_PRTY_STS_1 0x183cc +/* [R 32] Legacy E1 and E1H location for parity error status clear register. */ +#define NIG_REG_NIG_PRTY_STS_CLR 0x103d4 +/* [RC 32] Parity register #0 read clear */ +#define NIG_REG_NIG_PRTY_STS_CLR_0 0x183c0 +#define NIG_REG_NIG_PRTY_STS_CLR_1 0x183d0 +#define MCPR_IMC_COMMAND_ENABLE (1L<<31) +#define MCPR_IMC_COMMAND_IMC_STATUS_BITSHIFT 16 +#define MCPR_IMC_COMMAND_OPERATION_BITSHIFT 28 +#define MCPR_IMC_COMMAND_TRANSFER_ADDRESS_BITSHIFT 8 +/* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic + * Ethernet header. */ +#define NIG_REG_P0_HDRS_AFTER_BASIC 0x18038 +/* [RW 1] HW PFC enable bit. Set this bit to enable the PFC functionality in + * the NIG. Other flow control modes such as PAUSE and SAFC/LLFC should be + * disabled when this bit is set. */ +#define NIG_REG_P0_HWPFC_ENABLE 0x18078 +#define NIG_REG_P0_LLH_FUNC_MEM2 0x18480 +#define NIG_REG_P0_LLH_FUNC_MEM2_ENABLE 0x18440 +/* [RW 1] Input enable for RX MAC interface. */ +#define NIG_REG_P0_MAC_IN_EN 0x185ac +/* [RW 1] Output enable for TX MAC interface */ +#define NIG_REG_P0_MAC_OUT_EN 0x185b0 +/* [RW 1] Output enable for TX PAUSE signal to the MAC. */ +#define NIG_REG_P0_MAC_PAUSE_OUT_EN 0x185b4 +/* [RW 32] Eight 4-bit configurations for specifying which COS (0-15 for + * future expansion) each priorty is to be mapped to. Bits 3:0 specify the + * COS for priority 0. Bits 31:28 specify the COS for priority 7. The 3-bit + * priority field is extracted from the outer-most VLAN in receive packet. + * Only COS 0 and COS 1 are supported in E2. */ +#define NIG_REG_P0_PKT_PRIORITY_TO_COS 0x18054 +/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 0. A + * priority is mapped to COS 0 when the corresponding mask bit is 1. More + * than one bit may be set; allowing multiple priorities to be mapped to one + * COS. */ +#define NIG_REG_P0_RX_COS0_PRIORITY_MASK 0x18058 +/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 1. A + * priority is mapped to COS 1 when the corresponding mask bit is 1. More + * than one bit may be set; allowing multiple priorities to be mapped to one + * COS. */ +#define NIG_REG_P0_RX_COS1_PRIORITY_MASK 0x1805c +/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 2. A + * priority is mapped to COS 2 when the corresponding mask bit is 1. More + * than one bit may be set; allowing multiple priorities to be mapped to one + * COS. */ +#define NIG_REG_P0_RX_COS2_PRIORITY_MASK 0x186b0 +/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 3. A + * priority is mapped to COS 3 when the corresponding mask bit is 1. More + * than one bit may be set; allowing multiple priorities to be mapped to one + * COS. */ +#define NIG_REG_P0_RX_COS3_PRIORITY_MASK 0x186b4 +/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 4. A + * priority is mapped to COS 4 when the corresponding mask bit is 1. More + * than one bit may be set; allowing multiple priorities to be mapped to one + * COS. */ +#define NIG_REG_P0_RX_COS4_PRIORITY_MASK 0x186b8 +/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 5. A + * priority is mapped to COS 5 when the corresponding mask bit is 1. More + * than one bit may be set; allowing multiple priorities to be mapped to one + * COS. */ +#define NIG_REG_P0_RX_COS5_PRIORITY_MASK 0x186bc +/* [R 1] RX FIFO for receiving data from MAC is empty. */ +/* [RW 15] Specify which of the credit registers the client is to be mapped + * to. Bits[2:0] are for client 0; bits [14:12] are for client 4. For + * clients that are not subject to WFQ credit blocking - their + * specifications here are not used. */ +#define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP 0x180f0 +/* [RW 32] Specify which of the credit registers the client is to be mapped + * to. This register specifies bits 31:0 of the 36-bit value. Bits[3:0] are + * for client 0; bits [35:32] are for client 8. For clients that are not + * subject to WFQ credit blocking - their specifications here are not used. + * This is a new register (with 2_) added in E3 B0 to accommodate the 9 + * input clients to ETS arbiter. The reset default is set for management and + * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to + * use credit registers 0-5 respectively (0x543210876). Note that credit + * registers can not be shared between clients. */ +#define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_LSB 0x18688 +/* [RW 4] Specify which of the credit registers the client is to be mapped + * to. This register specifies bits 35:32 of the 36-bit value. Bits[3:0] are + * for client 0; bits [35:32] are for client 8. For clients that are not + * subject to WFQ credit blocking - their specifications here are not used. + * This is a new register (with 2_) added in E3 B0 to accommodate the 9 + * input clients to ETS arbiter. The reset default is set for management and + * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to + * use credit registers 0-5 respectively (0x543210876). Note that credit + * registers can not be shared between clients. */ +#define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_MSB 0x1868c +/* [RW 5] Specify whether the client competes directly in the strict + * priority arbiter. The bits are mapped according to client ID (client IDs + * are defined in tx_arb_priority_client). Default value is set to enable + * strict priorities for clients 0-2 -- management and debug traffic. */ +#define NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT 0x180e8 +/* [RW 5] Specify whether the client is subject to WFQ credit blocking. The + * bits are mapped according to client ID (client IDs are defined in + * tx_arb_priority_client). Default value is 0 for not using WFQ credit + * blocking. */ +#define NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ 0x180ec +/* [RW 32] Specify the upper bound that credit register 0 is allowed to + * reach. */ +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_0 0x1810c +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_1 0x18110 +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_2 0x18114 +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_3 0x18118 +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_4 0x1811c +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_5 0x186a0 +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_6 0x186a4 +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_7 0x186a8 +#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_8 0x186ac +/* [RW 32] Specify the weight (in bytes) to be added to credit register 0 + * when it is time to increment. */ +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0 0x180f8 +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1 0x180fc +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_2 0x18100 +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_3 0x18104 +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_4 0x18108 +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_5 0x18690 +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_6 0x18694 +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_7 0x18698 +#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_8 0x1869c +/* [RW 12] Specify the number of strict priority arbitration slots between + * two round-robin arbitration slots to avoid starvation. A value of 0 means + * no strict priority cycles - the strict priority with anti-starvation + * arbiter becomes a round-robin arbiter. */ +#define NIG_REG_P0_TX_ARB_NUM_STRICT_ARB_SLOTS 0x180f4 +/* [RW 15] Specify the client number to be assigned to each priority of the + * strict priority arbiter. Priority 0 is the highest priority. Bits [2:0] + * are for priority 0 client; bits [14:12] are for priority 4 client. The + * clients are assigned the following IDs: 0-management; 1-debug traffic + * from this port; 2-debug traffic from other port; 3-COS0 traffic; 4-COS1 + * traffic. The reset value[14:0] is set to 0x4688 (15'b100_011_010_001_000) + * for management at priority 0; debug traffic at priorities 1 and 2; COS0 + * traffic at priority 3; and COS1 traffic at priority 4. */ +#define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT 0x180e4 +/* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic + * Ethernet header. */ +#define NIG_REG_P1_HDRS_AFTER_BASIC 0x1818c +#define NIG_REG_P1_LLH_FUNC_MEM2 0x184c0 +#define NIG_REG_P1_LLH_FUNC_MEM2_ENABLE 0x18460 +/* [RW 32] Specify the client number to be assigned to each priority of the + * strict priority arbiter. This register specifies bits 31:0 of the 36-bit + * value. Priority 0 is the highest priority. Bits [3:0] are for priority 0 + * client; bits [35-32] are for priority 8 client. The clients are assigned + * the following IDs: 0-management; 1-debug traffic from this port; 2-debug + * traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic; + * 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is + * set to 0x345678021. This is a new register (with 2_) added in E3 B0 to + * accommodate the 9 input clients to ETS arbiter. */ +#define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_LSB 0x18680 +/* [RW 4] Specify the client number to be assigned to each priority of the + * strict priority arbiter. This register specifies bits 35:32 of the 36-bit + * value. Priority 0 is the highest priority. Bits [3:0] are for priority 0 + * client; bits [35-32] are for priority 8 client. The clients are assigned + * the following IDs: 0-management; 1-debug traffic from this port; 2-debug + * traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic; + * 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is + * set to 0x345678021. This is a new register (with 2_) added in E3 B0 to + * accommodate the 9 input clients to ETS arbiter. */ +#define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_MSB 0x18684 +#define NIG_REG_P1_MAC_IN_EN 0x185c0 +/* [RW 1] Output enable for TX MAC interface */ +#define NIG_REG_P1_MAC_OUT_EN 0x185c4 +/* [RW 1] Output enable for TX PAUSE signal to the MAC. */ +#define NIG_REG_P1_MAC_PAUSE_OUT_EN 0x185c8 +/* [RW 32] Eight 4-bit configurations for specifying which COS (0-15 for + * future expansion) each priorty is to be mapped to. Bits 3:0 specify the + * COS for priority 0. Bits 31:28 specify the COS for priority 7. The 3-bit + * priority field is extracted from the outer-most VLAN in receive packet. + * Only COS 0 and COS 1 are supported in E2. */ +#define NIG_REG_P1_PKT_PRIORITY_TO_COS 0x181a8 +/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 0. A + * priority is mapped to COS 0 when the corresponding mask bit is 1. More + * than one bit may be set; allowing multiple priorities to be mapped to one + * COS. */ +#define NIG_REG_P1_RX_COS0_PRIORITY_MASK 0x181ac +/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 1. A + * priority is mapped to COS 1 when the corresponding mask bit is 1. More + * than one bit may be set; allowing multiple priorities to be mapped to one + * COS. */ +#define NIG_REG_P1_RX_COS1_PRIORITY_MASK 0x181b0 +/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 2. A + * priority is mapped to COS 2 when the corresponding mask bit is 1. More + * than one bit may be set; allowing multiple priorities to be mapped to one + * COS. */ +#define NIG_REG_P1_RX_COS2_PRIORITY_MASK 0x186f8 +/* [R 1] RX FIFO for receiving data from MAC is empty. */ +#define NIG_REG_P1_RX_MACFIFO_EMPTY 0x1858c +/* [R 1] TLLH FIFO is empty. */ +#define NIG_REG_P1_TLLH_FIFO_EMPTY 0x18338 +/* [RW 32] Specify which of the credit registers the client is to be mapped + * to. This register specifies bits 31:0 of the 36-bit value. Bits[3:0] are + * for client 0; bits [35:32] are for client 8. For clients that are not + * subject to WFQ credit blocking - their specifications here are not used. + * This is a new register (with 2_) added in E3 B0 to accommodate the 9 + * input clients to ETS arbiter. The reset default is set for management and + * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to + * use credit registers 0-5 respectively (0x543210876). Note that credit + * registers can not be shared between clients. Note also that there are + * only COS0-2 in port 1- there is a total of 6 clients in port 1. Only + * credit registers 0-5 are valid. This register should be configured + * appropriately before enabling WFQ. */ +#define NIG_REG_P1_TX_ARB_CLIENT_CREDIT_MAP2_LSB 0x186e8 +/* [RW 4] Specify which of the credit registers the client is to be mapped + * to. This register specifies bits 35:32 of the 36-bit value. Bits[3:0] are + * for client 0; bits [35:32] are for client 8. For clients that are not + * subject to WFQ credit blocking - their specifications here are not used. + * This is a new register (with 2_) added in E3 B0 to accommodate the 9 + * input clients to ETS arbiter. The reset default is set for management and + * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to + * use credit registers 0-5 respectively (0x543210876). Note that credit + * registers can not be shared between clients. Note also that there are + * only COS0-2 in port 1- there is a total of 6 clients in port 1. Only + * credit registers 0-5 are valid. This register should be configured + * appropriately before enabling WFQ. */ +#define NIG_REG_P1_TX_ARB_CLIENT_CREDIT_MAP2_MSB 0x186ec +/* [RW 9] Specify whether the client competes directly in the strict + * priority arbiter. The bits are mapped according to client ID (client IDs + * are defined in tx_arb_priority_client2): 0-management; 1-debug traffic + * from this port; 2-debug traffic from other port; 3-COS0 traffic; 4-COS1 + * traffic; 5-COS2 traffic; 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. + * Default value is set to enable strict priorities for all clients. */ +#define NIG_REG_P1_TX_ARB_CLIENT_IS_STRICT 0x18234 +/* [RW 9] Specify whether the client is subject to WFQ credit blocking. The + * bits are mapped according to client ID (client IDs are defined in + * tx_arb_priority_client2): 0-management; 1-debug traffic from this port; + * 2-debug traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 + * traffic; 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. Default value is + * 0 for not using WFQ credit blocking. */ +#define NIG_REG_P1_TX_ARB_CLIENT_IS_SUBJECT2WFQ 0x18238 +#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_0 0x18258 +#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_1 0x1825c +#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_2 0x18260 +#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_3 0x18264 +#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_4 0x18268 +#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_5 0x186f4 +/* [RW 32] Specify the weight (in bytes) to be added to credit register 0 + * when it is time to increment. */ +#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_0 0x18244 +#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_1 0x18248 +#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_2 0x1824c +#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_3 0x18250 +#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_4 0x18254 +#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_5 0x186f0 +/* [RW 12] Specify the number of strict priority arbitration slots between + two round-robin arbitration slots to avoid starvation. A value of 0 means + no strict priority cycles - the strict priority with anti-starvation + arbiter becomes a round-robin arbiter. */ +#define NIG_REG_P1_TX_ARB_NUM_STRICT_ARB_SLOTS 0x18240 +/* [RW 32] Specify the client number to be assigned to each priority of the + strict priority arbiter. This register specifies bits 31:0 of the 36-bit + value. Priority 0 is the highest priority. Bits [3:0] are for priority 0 + client; bits [35-32] are for priority 8 client. The clients are assigned + the following IDs: 0-management; 1-debug traffic from this port; 2-debug + traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic; + 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is + set to 0x345678021. This is a new register (with 2_) added in E3 B0 to + accommodate the 9 input clients to ETS arbiter. Note that this register + is the same as the one for port 0, except that port 1 only has COS 0-2 + traffic. There is no traffic for COS 3-5 of port 1. */ +#define NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_LSB 0x186e0 +/* [RW 4] Specify the client number to be assigned to each priority of the + strict priority arbiter. This register specifies bits 35:32 of the 36-bit + value. Priority 0 is the highest priority. Bits [3:0] are for priority 0 + client; bits [35-32] are for priority 8 client. The clients are assigned + the following IDs: 0-management; 1-debug traffic from this port; 2-debug + traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic; + 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is + set to 0x345678021. This is a new register (with 2_) added in E3 B0 to + accommodate the 9 input clients to ETS arbiter. Note that this register + is the same as the one for port 0, except that port 1 only has COS 0-2 + traffic. There is no traffic for COS 3-5 of port 1. */ +#define NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_MSB 0x186e4 +/* [R 1] TX FIFO for transmitting data to MAC is empty. */ +#define NIG_REG_P1_TX_MACFIFO_EMPTY 0x18594 +/* [R 1] FIFO empty status of the MCP TX FIFO used for storing MCP packets + forwarded to the host. */ +#define NIG_REG_P1_TX_MNG_HOST_FIFO_EMPTY 0x182b8 +/* [RW 32] Specify the upper bound that credit register 0 is allowed to + * reach. */ +/* [RW 1] Pause enable for port0. This register may get 1 only when + ~safc_enable.safc_enable = 0 and ppp_enable.ppp_enable =0 for the same + port */ +#define NIG_REG_PAUSE_ENABLE_0 0x160c0 +#define NIG_REG_PAUSE_ENABLE_1 0x160c4 +/* [RW 1] Input enable for RX PBF LP IF */ +#define NIG_REG_PBF_LB_IN_EN 0x100b4 +/* [RW 1] Value of this register will be transmitted to port swap when + ~nig_registers_strap_override.strap_override =1 */ +#define NIG_REG_PORT_SWAP 0x10394 +/* [RW 1] PPP enable for port0. This register may get 1 only when + * ~safc_enable.safc_enable = 0 and pause_enable.pause_enable =0 for the + * same port */ +#define NIG_REG_PPP_ENABLE_0 0x160b0 +#define NIG_REG_PPP_ENABLE_1 0x160b4 +/* [RW 1] output enable for RX parser descriptor IF */ +#define NIG_REG_PRS_EOP_OUT_EN 0x10104 +/* [RW 1] Input enable for RX parser request IF */ +#define NIG_REG_PRS_REQ_IN_EN 0x100b8 +/* [RW 5] control to serdes - CL45 DEVAD */ +#define NIG_REG_SERDES0_CTRL_MD_DEVAD 0x10370 +/* [RW 1] control to serdes; 0 - clause 45; 1 - clause 22 */ +#define NIG_REG_SERDES0_CTRL_MD_ST 0x1036c +/* [RW 5] control to serdes - CL22 PHY_ADD and CL45 PRTAD */ +#define NIG_REG_SERDES0_CTRL_PHY_ADDR 0x10374 +/* [R 1] status from serdes0 that inputs to interrupt logic of link status */ +#define NIG_REG_SERDES0_STATUS_LINK_STATUS 0x10578 +/* [R 32] Rx statistics : In user packets discarded due to BRB backpressure + for port0 */ +#define NIG_REG_STAT0_BRB_DISCARD 0x105f0 +/* [R 32] Rx statistics : In user packets truncated due to BRB backpressure + for port0 */ +#define NIG_REG_STAT0_BRB_TRUNCATE 0x105f8 +/* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that + between 1024 and 1522 bytes for port0 */ +#define NIG_REG_STAT0_EGRESS_MAC_PKT0 0x10750 +/* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that + between 1523 bytes and above for port0 */ +#define NIG_REG_STAT0_EGRESS_MAC_PKT1 0x10760 +/* [R 32] Rx statistics : In user packets discarded due to BRB backpressure + for port1 */ +#define NIG_REG_STAT1_BRB_DISCARD 0x10628 +/* [WB_R 36] Tx statistics : Number of packets from emac1 or bmac1 that + between 1024 and 1522 bytes for port1 */ +#define NIG_REG_STAT1_EGRESS_MAC_PKT0 0x107a0 +/* [WB_R 36] Tx statistics : Number of packets from emac1 or bmac1 that + between 1523 bytes and above for port1 */ +#define NIG_REG_STAT1_EGRESS_MAC_PKT1 0x107b0 +/* [WB_R 64] Rx statistics : User octets received for LP */ +#define NIG_REG_STAT2_BRB_OCTET 0x107e0 +#define NIG_REG_STATUS_INTERRUPT_PORT0 0x10328 +#define NIG_REG_STATUS_INTERRUPT_PORT1 0x1032c +/* [RW 1] port swap mux selection. If this register equal to 0 then port + swap is equal to SPIO pin that inputs from ifmux_serdes_swap. If 1 then + ort swap is equal to ~nig_registers_port_swap.port_swap */ +#define NIG_REG_STRAP_OVERRIDE 0x10398 +/* [RW 1] output enable for RX_XCM0 IF */ +#define NIG_REG_XCM0_OUT_EN 0x100f0 +/* [RW 1] output enable for RX_XCM1 IF */ +#define NIG_REG_XCM1_OUT_EN 0x100f4 +/* [RW 1] control to xgxs - remote PHY in-band MDIO */ +#define NIG_REG_XGXS0_CTRL_EXTREMOTEMDIOST 0x10348 +/* [RW 5] control to xgxs - CL45 DEVAD */ +#define NIG_REG_XGXS0_CTRL_MD_DEVAD 0x1033c +/* [RW 1] control to xgxs; 0 - clause 45; 1 - clause 22 */ +#define NIG_REG_XGXS0_CTRL_MD_ST 0x10338 +/* [RW 5] control to xgxs - CL22 PHY_ADD and CL45 PRTAD */ +#define NIG_REG_XGXS0_CTRL_PHY_ADDR 0x10340 +/* [R 1] status from xgxs0 that inputs to interrupt logic of link10g. */ +#define NIG_REG_XGXS0_STATUS_LINK10G 0x10680 +/* [R 4] status from xgxs0 that inputs to interrupt logic of link status */ +#define NIG_REG_XGXS0_STATUS_LINK_STATUS 0x10684 +/* [RW 2] selection for XGXS lane of port 0 in NIG_MUX block */ +#define NIG_REG_XGXS_LANE_SEL_P0 0x102e8 +/* [RW 1] selection for port0 for NIG_MUX block : 0 = SerDes; 1 = XGXS */ +#define NIG_REG_XGXS_SERDES0_MODE_SEL 0x102e0 +#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_EMAC0_MISC_MI_INT (0x1<<0) +#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS (0x1<<9) +#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G (0x1<<15) +#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS (0xf<<18) +#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE 18 +/* [RW 31] The upper bound of the weight of COS0 in the ETS command arbiter. */ +#define PBF_REG_COS0_UPPER_BOUND 0x15c05c +/* [RW 31] The upper bound of the weight of COS0 in the ETS command arbiter + * of port 0. */ +#define PBF_REG_COS0_UPPER_BOUND_P0 0x15c2cc +/* [RW 31] The upper bound of the weight of COS0 in the ETS command arbiter + * of port 1. */ +#define PBF_REG_COS0_UPPER_BOUND_P1 0x15c2e4 +/* [RW 31] The weight of COS0 in the ETS command arbiter. */ +#define PBF_REG_COS0_WEIGHT 0x15c054 +/* [RW 31] The weight of COS0 in port 0 ETS command arbiter. */ +#define PBF_REG_COS0_WEIGHT_P0 0x15c2a8 +/* [RW 31] The weight of COS0 in port 1 ETS command arbiter. */ +#define PBF_REG_COS0_WEIGHT_P1 0x15c2c0 +/* [RW 31] The upper bound of the weight of COS1 in the ETS command arbiter. */ +#define PBF_REG_COS1_UPPER_BOUND 0x15c060 +/* [RW 31] The weight of COS1 in the ETS command arbiter. */ +#define PBF_REG_COS1_WEIGHT 0x15c058 +/* [RW 31] The weight of COS1 in port 0 ETS command arbiter. */ +#define PBF_REG_COS1_WEIGHT_P0 0x15c2ac +/* [RW 31] The weight of COS1 in port 1 ETS command arbiter. */ +#define PBF_REG_COS1_WEIGHT_P1 0x15c2c4 +/* [RW 31] The weight of COS2 in port 0 ETS command arbiter. */ +#define PBF_REG_COS2_WEIGHT_P0 0x15c2b0 +/* [RW 31] The weight of COS2 in port 1 ETS command arbiter. */ +#define PBF_REG_COS2_WEIGHT_P1 0x15c2c8 +/* [RW 31] The weight of COS3 in port 0 ETS command arbiter. */ +#define PBF_REG_COS3_WEIGHT_P0 0x15c2b4 +/* [RW 31] The weight of COS4 in port 0 ETS command arbiter. */ +#define PBF_REG_COS4_WEIGHT_P0 0x15c2b8 +/* [RW 31] The weight of COS5 in port 0 ETS command arbiter. */ +#define PBF_REG_COS5_WEIGHT_P0 0x15c2bc +/* [R 11] Current credit for the LB queue in the tx port buffers in 16 byte + * lines. */ +#define PBF_REG_CREDIT_LB_Q 0x140338 +/* [R 11] Current credit for queue 0 in the tx port buffers in 16 byte + * lines. */ +#define PBF_REG_CREDIT_Q0 0x14033c +/* [R 11] Current credit for queue 1 in the tx port buffers in 16 byte + * lines. */ +#define PBF_REG_CREDIT_Q1 0x140340 +/* [RW 1] Disable processing further tasks from port 0 (after ending the + current task in process). */ +#define PBF_REG_DISABLE_NEW_TASK_PROC_P0 0x14005c +/* [RW 1] Disable processing further tasks from port 1 (after ending the + current task in process). */ +#define PBF_REG_DISABLE_NEW_TASK_PROC_P1 0x140060 +/* [RW 1] Disable processing further tasks from port 4 (after ending the + current task in process). */ +#define PBF_REG_DISABLE_NEW_TASK_PROC_P4 0x14006c +#define PBF_REG_DISABLE_PF 0x1402e8 +/* [RW 18] For port 0: For each client that is subject to WFQ (the + * corresponding bit is 1); indicates to which of the credit registers this + * client is mapped. For clients which are not credit blocked; their mapping + * is dont care. */ +#define PBF_REG_ETS_ARB_CLIENT_CREDIT_MAP_P0 0x15c288 +/* [RW 9] For port 1: For each client that is subject to WFQ (the + * corresponding bit is 1); indicates to which of the credit registers this + * client is mapped. For clients which are not credit blocked; their mapping + * is dont care. */ +#define PBF_REG_ETS_ARB_CLIENT_CREDIT_MAP_P1 0x15c28c +/* [RW 6] For port 0: Bit per client to indicate if the client competes in + * the strict priority arbiter directly (corresponding bit = 1); or first + * goes to the RR arbiter (corresponding bit = 0); and then competes in the + * lowest priority in the strict-priority arbiter. */ +#define PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P0 0x15c278 +/* [RW 3] For port 1: Bit per client to indicate if the client competes in + * the strict priority arbiter directly (corresponding bit = 1); or first + * goes to the RR arbiter (corresponding bit = 0); and then competes in the + * lowest priority in the strict-priority arbiter. */ +#define PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P1 0x15c27c +/* [RW 6] For port 0: Bit per client to indicate if the client is subject to + * WFQ credit blocking (corresponding bit = 1). */ +#define PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P0 0x15c280 +/* [RW 3] For port 0: Bit per client to indicate if the client is subject to + * WFQ credit blocking (corresponding bit = 1). */ +#define PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P1 0x15c284 +/* [RW 16] For port 0: The number of strict priority arbitration slots + * between 2 RR arbitration slots. A value of 0 means no strict priority + * cycles; i.e. the strict-priority w/ anti-starvation arbiter is a RR + * arbiter. */ +#define PBF_REG_ETS_ARB_NUM_STRICT_ARB_SLOTS_P0 0x15c2a0 +/* [RW 16] For port 1: The number of strict priority arbitration slots + * between 2 RR arbitration slots. A value of 0 means no strict priority + * cycles; i.e. the strict-priority w/ anti-starvation arbiter is a RR + * arbiter. */ +#define PBF_REG_ETS_ARB_NUM_STRICT_ARB_SLOTS_P1 0x15c2a4 +/* [RW 18] For port 0: Indicates which client is connected to each priority + * in the strict-priority arbiter. Priority 0 is the highest priority, and + * priority 5 is the lowest; to which the RR output is connected to (this is + * not configurable). */ +#define PBF_REG_ETS_ARB_PRIORITY_CLIENT_P0 0x15c270 +/* [RW 9] For port 1: Indicates which client is connected to each priority + * in the strict-priority arbiter. Priority 0 is the highest priority, and + * priority 5 is the lowest; to which the RR output is connected to (this is + * not configurable). */ +#define PBF_REG_ETS_ARB_PRIORITY_CLIENT_P1 0x15c274 +/* [RW 1] Indicates that ETS is performed between the COSes in the command + * arbiter. If reset strict priority w/ anti-starvation will be performed + * w/o WFQ. */ +#define PBF_REG_ETS_ENABLED 0x15c050 +/* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic + * Ethernet header. */ +#define PBF_REG_HDRS_AFTER_BASIC 0x15c0a8 +/* [RW 6] Bit-map indicating which L2 hdrs may appear after L2 tag 0 */ +#define PBF_REG_HDRS_AFTER_TAG_0 0x15c0b8 +/* [R 1] Removed for E3 B0 - Indicates which COS is conncted to the highest + * priority in the command arbiter. */ +#define PBF_REG_HIGH_PRIORITY_COS_NUM 0x15c04c +#define PBF_REG_IF_ENABLE_REG 0x140044 +/* [RW 1] Init bit. When set the initial credits are copied to the credit + registers (except the port credits). Should be set and then reset after + the configuration of the block has ended. */ +#define PBF_REG_INIT 0x140000 +/* [RW 11] Initial credit for the LB queue in the tx port buffers in 16 byte + * lines. */ +#define PBF_REG_INIT_CRD_LB_Q 0x15c248 +/* [RW 11] Initial credit for queue 0 in the tx port buffers in 16 byte + * lines. */ +#define PBF_REG_INIT_CRD_Q0 0x15c230 +/* [RW 11] Initial credit for queue 1 in the tx port buffers in 16 byte + * lines. */ +#define PBF_REG_INIT_CRD_Q1 0x15c234 +/* [RW 1] Init bit for port 0. When set the initial credit of port 0 is + copied to the credit register. Should be set and then reset after the + configuration of the port has ended. */ +#define PBF_REG_INIT_P0 0x140004 +/* [RW 1] Init bit for port 1. When set the initial credit of port 1 is + copied to the credit register. Should be set and then reset after the + configuration of the port has ended. */ +#define PBF_REG_INIT_P1 0x140008 +/* [RW 1] Init bit for port 4. When set the initial credit of port 4 is + copied to the credit register. Should be set and then reset after the + configuration of the port has ended. */ +#define PBF_REG_INIT_P4 0x14000c +/* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for + * the LB queue. Reset upon init. */ +#define PBF_REG_INTERNAL_CRD_FREED_CNT_LB_Q 0x140354 +/* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for + * queue 0. Reset upon init. */ +#define PBF_REG_INTERNAL_CRD_FREED_CNT_Q0 0x140358 +/* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for + * queue 1. Reset upon init. */ +#define PBF_REG_INTERNAL_CRD_FREED_CNT_Q1 0x14035c +/* [RW 1] Enable for mac interface 0. */ +#define PBF_REG_MAC_IF0_ENABLE 0x140030 +/* [RW 1] Enable for mac interface 1. */ +#define PBF_REG_MAC_IF1_ENABLE 0x140034 +/* [RW 1] Enable for the loopback interface. */ +#define PBF_REG_MAC_LB_ENABLE 0x140040 +/* [RW 6] Bit-map indicating which headers must appear in the packet */ +#define PBF_REG_MUST_HAVE_HDRS 0x15c0c4 +/* [RW 16] The number of strict priority arbitration slots between 2 RR + * arbitration slots. A value of 0 means no strict priority cycles; i.e. the + * strict-priority w/ anti-starvation arbiter is a RR arbiter. */ +#define PBF_REG_NUM_STRICT_ARB_SLOTS 0x15c064 +/* [RW 10] Port 0 threshold used by arbiter in 16 byte lines used when pause + not suppoterd. */ +#define PBF_REG_P0_ARB_THRSH 0x1400e4 +/* [R 11] Current credit for port 0 in the tx port buffers in 16 byte lines. */ +#define PBF_REG_P0_CREDIT 0x140200 +/* [RW 11] Initial credit for port 0 in the tx port buffers in 16 byte + lines. */ +#define PBF_REG_P0_INIT_CRD 0x1400d0 +/* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for + * port 0. Reset upon init. */ +#define PBF_REG_P0_INTERNAL_CRD_FREED_CNT 0x140308 +/* [R 1] Removed for E3 B0 - Indication that pause is enabled for port 0. */ +#define PBF_REG_P0_PAUSE_ENABLE 0x140014 +/* [R 8] Removed for E3 B0 - Number of tasks in port 0 task queue. */ +#define PBF_REG_P0_TASK_CNT 0x140204 +/* [R 32] Removed for E3 B0 - Cyclic counter for number of 8 byte lines + * freed from the task queue of port 0. Reset upon init. */ +#define PBF_REG_P0_TQ_LINES_FREED_CNT 0x1402f0 +/* [R 12] Number of 8 bytes lines occupied in the task queue of port 0. */ +#define PBF_REG_P0_TQ_OCCUPANCY 0x1402fc +/* [R 11] Removed for E3 B0 - Current credit for port 1 in the tx port + * buffers in 16 byte lines. */ +#define PBF_REG_P1_CREDIT 0x140208 +/* [R 11] Removed for E3 B0 - Initial credit for port 0 in the tx port + * buffers in 16 byte lines. */ +#define PBF_REG_P1_INIT_CRD 0x1400d4 +/* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for + * port 1. Reset upon init. */ +#define PBF_REG_P1_INTERNAL_CRD_FREED_CNT 0x14030c +/* [R 8] Removed for E3 B0 - Number of tasks in port 1 task queue. */ +#define PBF_REG_P1_TASK_CNT 0x14020c +/* [R 32] Removed for E3 B0 - Cyclic counter for number of 8 byte lines + * freed from the task queue of port 1. Reset upon init. */ +#define PBF_REG_P1_TQ_LINES_FREED_CNT 0x1402f4 +/* [R 12] Number of 8 bytes lines occupied in the task queue of port 1. */ +#define PBF_REG_P1_TQ_OCCUPANCY 0x140300 +/* [R 11] Current credit for port 4 in the tx port buffers in 16 byte lines. */ +#define PBF_REG_P4_CREDIT 0x140210 +/* [RW 11] Initial credit for port 4 in the tx port buffers in 16 byte + lines. */ +#define PBF_REG_P4_INIT_CRD 0x1400e0 +/* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for + * port 4. Reset upon init. */ +#define PBF_REG_P4_INTERNAL_CRD_FREED_CNT 0x140310 +/* [R 8] Removed for E3 B0 - Number of tasks in port 4 task queue. */ +#define PBF_REG_P4_TASK_CNT 0x140214 +/* [R 32] Removed for E3 B0 - Cyclic counter for number of 8 byte lines + * freed from the task queue of port 4. Reset upon init. */ +#define PBF_REG_P4_TQ_LINES_FREED_CNT 0x1402f8 +/* [R 12] Number of 8 bytes lines occupied in the task queue of port 4. */ +#define PBF_REG_P4_TQ_OCCUPANCY 0x140304 +/* [RW 5] Interrupt mask register #0 read/write */ +#define PBF_REG_PBF_INT_MASK 0x1401d4 +/* [R 5] Interrupt register #0 read */ +#define PBF_REG_PBF_INT_STS 0x1401c8 +/* [RW 20] Parity mask register #0 read/write */ +#define PBF_REG_PBF_PRTY_MASK 0x1401e4 +/* [RC 20] Parity register #0 read clear */ +#define PBF_REG_PBF_PRTY_STS_CLR 0x1401dc +/* [RW 16] The Ethernet type value for L2 tag 0 */ +#define PBF_REG_TAG_ETHERTYPE_0 0x15c090 +/* [RW 4] The length of the info field for L2 tag 0. The length is between + * 2B and 14B; in 2B granularity */ +#define PBF_REG_TAG_LEN_0 0x15c09c +/* [R 32] Cyclic counter for number of 8 byte lines freed from the LB task + * queue. Reset upon init. */ +#define PBF_REG_TQ_LINES_FREED_CNT_LB_Q 0x14038c +/* [R 32] Cyclic counter for number of 8 byte lines freed from the task + * queue 0. Reset upon init. */ +#define PBF_REG_TQ_LINES_FREED_CNT_Q0 0x140390 +/* [R 32] Cyclic counter for number of 8 byte lines freed from task queue 1. + * Reset upon init. */ +#define PBF_REG_TQ_LINES_FREED_CNT_Q1 0x140394 +/* [R 13] Number of 8 bytes lines occupied in the task queue of the LB + * queue. */ +#define PBF_REG_TQ_OCCUPANCY_LB_Q 0x1403a8 +/* [R 13] Number of 8 bytes lines occupied in the task queue of queue 0. */ +#define PBF_REG_TQ_OCCUPANCY_Q0 0x1403ac +/* [R 13] Number of 8 bytes lines occupied in the task queue of queue 1. */ +#define PBF_REG_TQ_OCCUPANCY_Q1 0x1403b0 +#define PB_REG_CONTROL 0 +/* [RW 2] Interrupt mask register #0 read/write */ +#define PB_REG_PB_INT_MASK 0x28 +/* [R 2] Interrupt register #0 read */ +#define PB_REG_PB_INT_STS 0x1c +/* [RW 4] Parity mask register #0 read/write */ +#define PB_REG_PB_PRTY_MASK 0x38 +/* [R 4] Parity register #0 read */ +#define PB_REG_PB_PRTY_STS 0x2c +/* [RC 4] Parity register #0 read clear */ +#define PB_REG_PB_PRTY_STS_CLR 0x30 +#define PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW (0x1<<8) +#define PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR (0x1<<1) +#define PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN (0x1<<6) +#define PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN (0x1<<7) +#define PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN (0x1<<4) +#define PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN (0x1<<3) +#define PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN (0x1<<5) +#define PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN (0x1<<2) +/* [R 8] Config space A attention dirty bits. Each bit indicates that the + * corresponding PF generates config space A attention. Set by PXP. Reset by + * MCP writing 1 to icfg_space_a_request_clr. Note: register contains bits + * from both paths. */ +#define PGLUE_B_REG_CFG_SPACE_A_REQUEST 0x9010 +/* [R 8] Config space B attention dirty bits. Each bit indicates that the + * corresponding PF generates config space B attention. Set by PXP. Reset by + * MCP writing 1 to icfg_space_b_request_clr. Note: register contains bits + * from both paths. */ +#define PGLUE_B_REG_CFG_SPACE_B_REQUEST 0x9014 +/* [RW 1] Type A PF enable inbound interrupt table for CSDM. 0 - disable; 1 + * - enable. */ +#define PGLUE_B_REG_CSDM_INB_INT_A_PF_ENABLE 0x9194 +/* [RW 18] Type B VF inbound interrupt table for CSDM: bits[17:9]-mask; + * its[8:0]-address. Bits [1:0] must be zero (DW resolution address). */ +#define PGLUE_B_REG_CSDM_INB_INT_B_VF 0x916c +/* [RW 1] Type B VF enable inbound interrupt table for CSDM. 0 - disable; 1 + * - enable. */ +#define PGLUE_B_REG_CSDM_INB_INT_B_VF_ENABLE 0x919c +/* [RW 16] Start offset of CSDM zone A (queue zone) in the internal RAM */ +#define PGLUE_B_REG_CSDM_START_OFFSET_A 0x9100 +/* [RW 16] Start offset of CSDM zone B (legacy zone) in the internal RAM */ +#define PGLUE_B_REG_CSDM_START_OFFSET_B 0x9108 +/* [RW 5] VF Shift of CSDM zone B (legacy zone) in the internal RAM */ +#define PGLUE_B_REG_CSDM_VF_SHIFT_B 0x9110 +/* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */ +#define PGLUE_B_REG_CSDM_ZONE_A_SIZE_PF 0x91ac +/* [R 8] FLR request attention dirty bits for PFs 0 to 7. Each bit indicates + * that the FLR register of the corresponding PF was set. Set by PXP. Reset + * by MCP writing 1 to flr_request_pf_7_0_clr. Note: register contains bits + * from both paths. */ +#define PGLUE_B_REG_FLR_REQUEST_PF_7_0 0x9028 +/* [W 8] FLR request attention dirty bits clear for PFs 0 to 7. MCP writes 1 + * to a bit in this register in order to clear the corresponding bit in + * flr_request_pf_7_0 register. Note: register contains bits from both + * paths. */ +#define PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR 0x9418 +/* [R 32] FLR request attention dirty bits for VFs 96 to 127. Each bit + * indicates that the FLR register of the corresponding VF was set. Set by + * PXP. Reset by MCP writing 1 to flr_request_vf_127_96_clr. */ +#define PGLUE_B_REG_FLR_REQUEST_VF_127_96 0x9024 +/* [R 32] FLR request attention dirty bits for VFs 0 to 31. Each bit + * indicates that the FLR register of the corresponding VF was set. Set by + * PXP. Reset by MCP writing 1 to flr_request_vf_31_0_clr. */ +#define PGLUE_B_REG_FLR_REQUEST_VF_31_0 0x9018 +/* [R 32] FLR request attention dirty bits for VFs 32 to 63. Each bit + * indicates that the FLR register of the corresponding VF was set. Set by + * PXP. Reset by MCP writing 1 to flr_request_vf_63_32_clr. */ +#define PGLUE_B_REG_FLR_REQUEST_VF_63_32 0x901c +/* [R 32] FLR request attention dirty bits for VFs 64 to 95. Each bit + * indicates that the FLR register of the corresponding VF was set. Set by + * PXP. Reset by MCP writing 1 to flr_request_vf_95_64_clr. */ +#define PGLUE_B_REG_FLR_REQUEST_VF_95_64 0x9020 +/* [R 8] Each bit indicates an incorrect behavior in user RX interface. Bit + * 0 - Target memory read arrived with a correctable error. Bit 1 - Target + * memory read arrived with an uncorrectable error. Bit 2 - Configuration RW + * arrived with a correctable error. Bit 3 - Configuration RW arrived with + * an uncorrectable error. Bit 4 - Completion with Configuration Request + * Retry Status. Bit 5 - Expansion ROM access received with a write request. + * Bit 6 - Completion with pcie_rx_err of 0000; CMPL_STATUS of non-zero; and + * pcie_rx_last not asserted. Bit 7 - Completion with pcie_rx_err of 1010; + * and pcie_rx_last not asserted. */ +#define PGLUE_B_REG_INCORRECT_RCV_DETAILS 0x9068 +#define PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER 0x942c +#define PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ 0x9430 +#define PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_WRITE 0x9434 +#define PGLUE_B_REG_INTERNAL_VFID_ENABLE 0x9438 +/* [R 9] Interrupt register #0 read */ +#define PGLUE_B_REG_PGLUE_B_INT_STS 0x9298 +/* [RC 9] Interrupt register #0 read clear */ +#define PGLUE_B_REG_PGLUE_B_INT_STS_CLR 0x929c +/* [RW 2] Parity mask register #0 read/write */ +#define PGLUE_B_REG_PGLUE_B_PRTY_MASK 0x92b4 +/* [R 2] Parity register #0 read */ +#define PGLUE_B_REG_PGLUE_B_PRTY_STS 0x92a8 +/* [RC 2] Parity register #0 read clear */ +#define PGLUE_B_REG_PGLUE_B_PRTY_STS_CLR 0x92ac +/* [R 13] Details of first request received with error. [2:0] - PFID. [3] - + * VF_VALID. [9:4] - VFID. [11:10] - Error Code - 0 - Indicates Completion + * Timeout of a User Tx non-posted request. 1 - unsupported request. 2 - + * completer abort. 3 - Illegal value for this field. [12] valid - indicates + * if there was a completion error since the last time this register was + * cleared. */ +#define PGLUE_B_REG_RX_ERR_DETAILS 0x9080 +/* [R 18] Details of first ATS Translation Completion request received with + * error. [2:0] - PFID. [3] - VF_VALID. [9:4] - VFID. [11:10] - Error Code - + * 0 - Indicates Completion Timeout of a User Tx non-posted request. 1 - + * unsupported request. 2 - completer abort. 3 - Illegal value for this + * field. [16:12] - ATC OTB EntryID. [17] valid - indicates if there was a + * completion error since the last time this register was cleared. */ +#define PGLUE_B_REG_RX_TCPL_ERR_DETAILS 0x9084 +/* [W 8] Debug only - Shadow BME bits clear for PFs 0 to 7. MCP writes 1 to + * a bit in this register in order to clear the corresponding bit in + * shadow_bme_pf_7_0 register. MCP should never use this unless a + * work-around is needed. Note: register contains bits from both paths. */ +#define PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR 0x9458 +/* [R 8] SR IOV disabled attention dirty bits. Each bit indicates that the + * VF enable register of the corresponding PF is written to 0 and was + * previously 1. Set by PXP. Reset by MCP writing 1 to + * sr_iov_disabled_request_clr. Note: register contains bits from both + * paths. */ +#define PGLUE_B_REG_SR_IOV_DISABLED_REQUEST 0x9030 +/* [R 32] Indicates the status of tags 32-63. 0 - tags is used - read + * completion did not return yet. 1 - tag is unused. Same functionality as + * pxp2_registers_pgl_exp_rom_data2 for tags 0-31. */ +#define PGLUE_B_REG_TAGS_63_32 0x9244 +/* [RW 1] Type A PF enable inbound interrupt table for TSDM. 0 - disable; 1 + * - enable. */ +#define PGLUE_B_REG_TSDM_INB_INT_A_PF_ENABLE 0x9170 +/* [RW 16] Start offset of TSDM zone A (queue zone) in the internal RAM */ +#define PGLUE_B_REG_TSDM_START_OFFSET_A 0x90c4 +/* [RW 16] Start offset of TSDM zone B (legacy zone) in the internal RAM */ +#define PGLUE_B_REG_TSDM_START_OFFSET_B 0x90cc +/* [RW 5] VF Shift of TSDM zone B (legacy zone) in the internal RAM */ +#define PGLUE_B_REG_TSDM_VF_SHIFT_B 0x90d4 +/* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */ +#define PGLUE_B_REG_TSDM_ZONE_A_SIZE_PF 0x91a0 +/* [R 32] Address [31:0] of first read request not submitted due to error */ +#define PGLUE_B_REG_TX_ERR_RD_ADD_31_0 0x9098 +/* [R 32] Address [63:32] of first read request not submitted due to error */ +#define PGLUE_B_REG_TX_ERR_RD_ADD_63_32 0x909c +/* [R 31] Details of first read request not submitted due to error. [4:0] + * VQID. [5] TREQ. 1 - Indicates the request is a Translation Request. + * [20:8] - Length in bytes. [23:21] - PFID. [24] - VF_VALID. [30:25] - + * VFID. */ +#define PGLUE_B_REG_TX_ERR_RD_DETAILS 0x90a0 +/* [R 26] Details of first read request not submitted due to error. [15:0] + * Request ID. [19:16] client ID. [20] - last SR. [24:21] - Error type - + * [21] - Indicates was_error was set; [22] - Indicates BME was cleared; + * [23] - Indicates FID_enable was cleared; [24] - Indicates VF with parent + * PF FLR_request or IOV_disable_request dirty bit is set. [25] valid - + * indicates if there was a request not submitted due to error since the + * last time this register was cleared. */ +#define PGLUE_B_REG_TX_ERR_RD_DETAILS2 0x90a4 +/* [R 32] Address [31:0] of first write request not submitted due to error */ +#define PGLUE_B_REG_TX_ERR_WR_ADD_31_0 0x9088 +/* [R 32] Address [63:32] of first write request not submitted due to error */ +#define PGLUE_B_REG_TX_ERR_WR_ADD_63_32 0x908c +/* [R 31] Details of first write request not submitted due to error. [4:0] + * VQID. [20:8] - Length in bytes. [23:21] - PFID. [24] - VF_VALID. [30:25] + * - VFID. */ +#define PGLUE_B_REG_TX_ERR_WR_DETAILS 0x9090 +/* [R 26] Details of first write request not submitted due to error. [15:0] + * Request ID. [19:16] client ID. [20] - last SR. [24:21] - Error type - + * [21] - Indicates was_error was set; [22] - Indicates BME was cleared; + * [23] - Indicates FID_enable was cleared; [24] - Indicates VF with parent + * PF FLR_request or IOV_disable_request dirty bit is set. [25] valid - + * indicates if there was a request not submitted due to error since the + * last time this register was cleared. */ +#define PGLUE_B_REG_TX_ERR_WR_DETAILS2 0x9094 +/* [RW 10] Type A PF/VF inbound interrupt table for USDM: bits[9:5]-mask; + * its[4:0]-address relative to start_offset_a. Bits [1:0] can have any + * value (Byte resolution address). */ +#define PGLUE_B_REG_USDM_INB_INT_A_0 0x9128 +#define PGLUE_B_REG_USDM_INB_INT_A_1 0x912c +#define PGLUE_B_REG_USDM_INB_INT_A_2 0x9130 +#define PGLUE_B_REG_USDM_INB_INT_A_3 0x9134 +#define PGLUE_B_REG_USDM_INB_INT_A_4 0x9138 +#define PGLUE_B_REG_USDM_INB_INT_A_5 0x913c +#define PGLUE_B_REG_USDM_INB_INT_A_6 0x9140 +/* [RW 1] Type A PF enable inbound interrupt table for USDM. 0 - disable; 1 + * - enable. */ +#define PGLUE_B_REG_USDM_INB_INT_A_PF_ENABLE 0x917c +/* [RW 1] Type A VF enable inbound interrupt table for USDM. 0 - disable; 1 + * - enable. */ +#define PGLUE_B_REG_USDM_INB_INT_A_VF_ENABLE 0x9180 +/* [RW 1] Type B VF enable inbound interrupt table for USDM. 0 - disable; 1 + * - enable. */ +#define PGLUE_B_REG_USDM_INB_INT_B_VF_ENABLE 0x9184 +/* [RW 16] Start offset of USDM zone A (queue zone) in the internal RAM */ +#define PGLUE_B_REG_USDM_START_OFFSET_A 0x90d8 +/* [RW 16] Start offset of USDM zone B (legacy zone) in the internal RAM */ +#define PGLUE_B_REG_USDM_START_OFFSET_B 0x90e0 +/* [RW 5] VF Shift of USDM zone B (legacy zone) in the internal RAM */ +#define PGLUE_B_REG_USDM_VF_SHIFT_B 0x90e8 +/* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */ +#define PGLUE_B_REG_USDM_ZONE_A_SIZE_PF 0x91a4 +/* [R 26] Details of first target VF request accessing VF GRC space that + * failed permission check. [14:0] Address. [15] w_nr: 0 - Read; 1 - Write. + * [21:16] VFID. [24:22] - PFID. [25] valid - indicates if there was a + * request accessing VF GRC space that failed permission check since the + * last time this register was cleared. Permission checks are: function + * permission; R/W permission; address range permission. */ +#define PGLUE_B_REG_VF_GRC_SPACE_VIOLATION_DETAILS 0x9234 +/* [R 31] Details of first target VF request with length violation (too many + * DWs) accessing BAR0. [12:0] Address in DWs (bits [14:2] of byte address). + * [14:13] BAR. [20:15] VFID. [23:21] - PFID. [29:24] - Length in DWs. [30] + * valid - indicates if there was a request with length violation since the + * last time this register was cleared. Length violations: length of more + * than 2DWs; length of 2DWs and address not QW aligned; window is GRC and + * length is more than 1 DW. */ +#define PGLUE_B_REG_VF_LENGTH_VIOLATION_DETAILS 0x9230 +/* [R 8] Was_error indication dirty bits for PFs 0 to 7. Each bit indicates + * that there was a completion with uncorrectable error for the + * corresponding PF. Set by PXP. Reset by MCP writing 1 to + * was_error_pf_7_0_clr. */ +#define PGLUE_B_REG_WAS_ERROR_PF_7_0 0x907c +/* [W 8] Was_error indication dirty bits clear for PFs 0 to 7. MCP writes 1 + * to a bit in this register in order to clear the corresponding bit in + * flr_request_pf_7_0 register. */ +#define PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR 0x9470 +/* [R 32] Was_error indication dirty bits for VFs 96 to 127. Each bit + * indicates that there was a completion with uncorrectable error for the + * corresponding VF. Set by PXP. Reset by MCP writing 1 to + * was_error_vf_127_96_clr. */ +#define PGLUE_B_REG_WAS_ERROR_VF_127_96 0x9078 +/* [W 32] Was_error indication dirty bits clear for VFs 96 to 127. MCP + * writes 1 to a bit in this register in order to clear the corresponding + * bit in was_error_vf_127_96 register. */ +#define PGLUE_B_REG_WAS_ERROR_VF_127_96_CLR 0x9474 +/* [R 32] Was_error indication dirty bits for VFs 0 to 31. Each bit + * indicates that there was a completion with uncorrectable error for the + * corresponding VF. Set by PXP. Reset by MCP writing 1 to + * was_error_vf_31_0_clr. */ +#define PGLUE_B_REG_WAS_ERROR_VF_31_0 0x906c +/* [W 32] Was_error indication dirty bits clear for VFs 0 to 31. MCP writes + * 1 to a bit in this register in order to clear the corresponding bit in + * was_error_vf_31_0 register. */ +#define PGLUE_B_REG_WAS_ERROR_VF_31_0_CLR 0x9478 +/* [R 32] Was_error indication dirty bits for VFs 32 to 63. Each bit + * indicates that there was a completion with uncorrectable error for the + * corresponding VF. Set by PXP. Reset by MCP writing 1 to + * was_error_vf_63_32_clr. */ +#define PGLUE_B_REG_WAS_ERROR_VF_63_32 0x9070 +/* [W 32] Was_error indication dirty bits clear for VFs 32 to 63. MCP writes + * 1 to a bit in this register in order to clear the corresponding bit in + * was_error_vf_63_32 register. */ +#define PGLUE_B_REG_WAS_ERROR_VF_63_32_CLR 0x947c +/* [R 32] Was_error indication dirty bits for VFs 64 to 95. Each bit + * indicates that there was a completion with uncorrectable error for the + * corresponding VF. Set by PXP. Reset by MCP writing 1 to + * was_error_vf_95_64_clr. */ +#define PGLUE_B_REG_WAS_ERROR_VF_95_64 0x9074 +/* [W 32] Was_error indication dirty bits clear for VFs 64 to 95. MCP writes + * 1 to a bit in this register in order to clear the corresponding bit in + * was_error_vf_95_64 register. */ +#define PGLUE_B_REG_WAS_ERROR_VF_95_64_CLR 0x9480 +/* [RW 1] Type A PF enable inbound interrupt table for XSDM. 0 - disable; 1 + * - enable. */ +#define PGLUE_B_REG_XSDM_INB_INT_A_PF_ENABLE 0x9188 +/* [RW 16] Start offset of XSDM zone A (queue zone) in the internal RAM */ +#define PGLUE_B_REG_XSDM_START_OFFSET_A 0x90ec +/* [RW 16] Start offset of XSDM zone B (legacy zone) in the internal RAM */ +#define PGLUE_B_REG_XSDM_START_OFFSET_B 0x90f4 +/* [RW 5] VF Shift of XSDM zone B (legacy zone) in the internal RAM */ +#define PGLUE_B_REG_XSDM_VF_SHIFT_B 0x90fc +/* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */ +#define PGLUE_B_REG_XSDM_ZONE_A_SIZE_PF 0x91a8 +#define PRS_REG_A_PRSU_20 0x40134 +/* [R 8] debug only: CFC load request current credit. Transaction based. */ +#define PRS_REG_CFC_LD_CURRENT_CREDIT 0x40164 +/* [R 8] debug only: CFC search request current credit. Transaction based. */ +#define PRS_REG_CFC_SEARCH_CURRENT_CREDIT 0x40168 +/* [RW 6] The initial credit for the search message to the CFC interface. + Credit is transaction based. */ +#define PRS_REG_CFC_SEARCH_INITIAL_CREDIT 0x4011c +/* [RW 24] CID for port 0 if no match */ +#define PRS_REG_CID_PORT_0 0x400fc +/* [RW 32] The CM header for flush message where 'load existed' bit in CFC + load response is reset and packet type is 0. Used in packet start message + to TCM. */ +#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_0 0x400dc +#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_1 0x400e0 +#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_2 0x400e4 +#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_3 0x400e8 +#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_4 0x400ec +#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_5 0x400f0 +/* [RW 32] The CM header for flush message where 'load existed' bit in CFC + load response is set and packet type is 0. Used in packet start message + to TCM. */ +#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_0 0x400bc +#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_1 0x400c0 +#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_2 0x400c4 +#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_3 0x400c8 +#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_4 0x400cc +#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_5 0x400d0 +/* [RW 32] The CM header for a match and packet type 1 for loopback port. + Used in packet start message to TCM. */ +#define PRS_REG_CM_HDR_LOOPBACK_TYPE_1 0x4009c +#define PRS_REG_CM_HDR_LOOPBACK_TYPE_2 0x400a0 +#define PRS_REG_CM_HDR_LOOPBACK_TYPE_3 0x400a4 +#define PRS_REG_CM_HDR_LOOPBACK_TYPE_4 0x400a8 +/* [RW 32] The CM header for a match and packet type 0. Used in packet start + message to TCM. */ +#define PRS_REG_CM_HDR_TYPE_0 0x40078 +#define PRS_REG_CM_HDR_TYPE_1 0x4007c +#define PRS_REG_CM_HDR_TYPE_2 0x40080 +#define PRS_REG_CM_HDR_TYPE_3 0x40084 +#define PRS_REG_CM_HDR_TYPE_4 0x40088 +/* [RW 32] The CM header in case there was not a match on the connection */ +#define PRS_REG_CM_NO_MATCH_HDR 0x400b8 +/* [RW 1] Indicates if in e1hov mode. 0=non-e1hov mode; 1=e1hov mode. */ +#define PRS_REG_E1HOV_MODE 0x401c8 +/* [RW 8] The 8-bit event ID for a match and packet type 1. Used in packet + start message to TCM. */ +#define PRS_REG_EVENT_ID_1 0x40054 +#define PRS_REG_EVENT_ID_2 0x40058 +#define PRS_REG_EVENT_ID_3 0x4005c +/* [RW 16] The Ethernet type value for FCoE */ +#define PRS_REG_FCOE_TYPE 0x401d0 +/* [RW 8] Context region for flush packet with packet type 0. Used in CFC + load request message. */ +#define PRS_REG_FLUSH_REGIONS_TYPE_0 0x40004 +#define PRS_REG_FLUSH_REGIONS_TYPE_1 0x40008 +#define PRS_REG_FLUSH_REGIONS_TYPE_2 0x4000c +#define PRS_REG_FLUSH_REGIONS_TYPE_3 0x40010 +#define PRS_REG_FLUSH_REGIONS_TYPE_4 0x40014 +#define PRS_REG_FLUSH_REGIONS_TYPE_5 0x40018 +#define PRS_REG_FLUSH_REGIONS_TYPE_6 0x4001c +#define PRS_REG_FLUSH_REGIONS_TYPE_7 0x40020 +/* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic + * Ethernet header. */ +#define PRS_REG_HDRS_AFTER_BASIC 0x40238 +/* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic + * Ethernet header for port 0 packets. */ +#define PRS_REG_HDRS_AFTER_BASIC_PORT_0 0x40270 +#define PRS_REG_HDRS_AFTER_BASIC_PORT_1 0x40290 +/* [R 6] Bit-map indicating which L2 hdrs may appear after L2 tag 0 */ +#define PRS_REG_HDRS_AFTER_TAG_0 0x40248 +/* [RW 6] Bit-map indicating which L2 hdrs may appear after L2 tag 0 for + * port 0 packets */ +#define PRS_REG_HDRS_AFTER_TAG_0_PORT_0 0x40280 +#define PRS_REG_HDRS_AFTER_TAG_0_PORT_1 0x402a0 +/* [RW 4] The increment value to send in the CFC load request message */ +#define PRS_REG_INC_VALUE 0x40048 +/* [RW 6] Bit-map indicating which headers must appear in the packet */ +#define PRS_REG_MUST_HAVE_HDRS 0x40254 +/* [RW 6] Bit-map indicating which headers must appear in the packet for + * port 0 packets */ +#define PRS_REG_MUST_HAVE_HDRS_PORT_0 0x4028c +#define PRS_REG_MUST_HAVE_HDRS_PORT_1 0x402ac +#define PRS_REG_NIC_MODE 0x40138 +/* [RW 8] The 8-bit event ID for cases where there is no match on the + connection. Used in packet start message to TCM. */ +#define PRS_REG_NO_MATCH_EVENT_ID 0x40070 +/* [ST 24] The number of input CFC flush packets */ +#define PRS_REG_NUM_OF_CFC_FLUSH_MESSAGES 0x40128 +/* [ST 32] The number of cycles the Parser halted its operation since it + could not allocate the next serial number */ +#define PRS_REG_NUM_OF_DEAD_CYCLES 0x40130 +/* [ST 24] The number of input packets */ +#define PRS_REG_NUM_OF_PACKETS 0x40124 +/* [ST 24] The number of input transparent flush packets */ +#define PRS_REG_NUM_OF_TRANSPARENT_FLUSH_MESSAGES 0x4012c +/* [RW 8] Context region for received Ethernet packet with a match and + packet type 0. Used in CFC load request message */ +#define PRS_REG_PACKET_REGIONS_TYPE_0 0x40028 +#define PRS_REG_PACKET_REGIONS_TYPE_1 0x4002c +#define PRS_REG_PACKET_REGIONS_TYPE_2 0x40030 +#define PRS_REG_PACKET_REGIONS_TYPE_3 0x40034 +#define PRS_REG_PACKET_REGIONS_TYPE_4 0x40038 +#define PRS_REG_PACKET_REGIONS_TYPE_5 0x4003c +#define PRS_REG_PACKET_REGIONS_TYPE_6 0x40040 +#define PRS_REG_PACKET_REGIONS_TYPE_7 0x40044 +/* [R 2] debug only: Number of pending requests for CAC on port 0. */ +#define PRS_REG_PENDING_BRB_CAC0_RQ 0x40174 +/* [R 2] debug only: Number of pending requests for header parsing. */ +#define PRS_REG_PENDING_BRB_PRS_RQ 0x40170 +/* [R 1] Interrupt register #0 read */ +#define PRS_REG_PRS_INT_STS 0x40188 +/* [RW 8] Parity mask register #0 read/write */ +#define PRS_REG_PRS_PRTY_MASK 0x401a4 +/* [R 8] Parity register #0 read */ +#define PRS_REG_PRS_PRTY_STS 0x40198 +/* [RC 8] Parity register #0 read clear */ +#define PRS_REG_PRS_PRTY_STS_CLR 0x4019c +/* [RW 8] Context region for pure acknowledge packets. Used in CFC load + request message */ +#define PRS_REG_PURE_REGIONS 0x40024 +/* [R 32] debug only: Serial number status lsb 32 bits. '1' indicates this + serail number was released by SDM but cannot be used because a previous + serial number was not released. */ +#define PRS_REG_SERIAL_NUM_STATUS_LSB 0x40154 +/* [R 32] debug only: Serial number status msb 32 bits. '1' indicates this + serail number was released by SDM but cannot be used because a previous + serial number was not released. */ +#define PRS_REG_SERIAL_NUM_STATUS_MSB 0x40158 +/* [R 4] debug only: SRC current credit. Transaction based. */ +#define PRS_REG_SRC_CURRENT_CREDIT 0x4016c +/* [RW 16] The Ethernet type value for L2 tag 0 */ +#define PRS_REG_TAG_ETHERTYPE_0 0x401d4 +/* [RW 4] The length of the info field for L2 tag 0. The length is between + * 2B and 14B; in 2B granularity */ +#define PRS_REG_TAG_LEN_0 0x4022c +/* [R 8] debug only: TCM current credit. Cycle based. */ +#define PRS_REG_TCM_CURRENT_CREDIT 0x40160 +/* [R 8] debug only: TSDM current credit. Transaction based. */ +#define PRS_REG_TSDM_CURRENT_CREDIT 0x4015c +#define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT (0x1<<19) +#define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF (0x1<<20) +#define PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN (0x1<<22) +#define PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED (0x1<<23) +#define PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED (0x1<<24) +#define PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR (0x1<<7) +#define PXP2_PXP2_INT_STS_CLR_0_REG_WR_PGLUE_EOP_ERROR (0x1<<7) +/* [R 6] Debug only: Number of used entries in the data FIFO */ +#define PXP2_REG_HST_DATA_FIFO_STATUS 0x12047c +/* [R 7] Debug only: Number of used entries in the header FIFO */ +#define PXP2_REG_HST_HEADER_FIFO_STATUS 0x120478 +#define PXP2_REG_PGL_ADDR_88_F0 0x120534 +/* [R 32] GRC address for configuration access to PCIE config address 0x88. + * any write to this PCIE address will cause a GRC write access to the + * address that's in t this register */ +#define PXP2_REG_PGL_ADDR_88_F1 0x120544 +#define PXP2_REG_PGL_ADDR_8C_F0 0x120538 +/* [R 32] GRC address for configuration access to PCIE config address 0x8c. + * any write to this PCIE address will cause a GRC write access to the + * address that's in t this register */ +#define PXP2_REG_PGL_ADDR_8C_F1 0x120548 +#define PXP2_REG_PGL_ADDR_90_F0 0x12053c +/* [R 32] GRC address for configuration access to PCIE config address 0x90. + * any write to this PCIE address will cause a GRC write access to the + * address that's in t this register */ +#define PXP2_REG_PGL_ADDR_90_F1 0x12054c +#define PXP2_REG_PGL_ADDR_94_F0 0x120540 +/* [R 32] GRC address for configuration access to PCIE config address 0x94. + * any write to this PCIE address will cause a GRC write access to the + * address that's in t this register */ +#define PXP2_REG_PGL_ADDR_94_F1 0x120550 +#define PXP2_REG_PGL_CONTROL0 0x120490 +#define PXP2_REG_PGL_CONTROL1 0x120514 +#define PXP2_REG_PGL_DEBUG 0x120520 +/* [RW 32] third dword data of expansion rom request. this register is + special. reading from it provides a vector outstanding read requests. if + a bit is zero it means that a read request on the corresponding tag did + not finish yet (not all completions have arrived for it) */ +#define PXP2_REG_PGL_EXP_ROM2 0x120808 +/* [RW 32] Inbound interrupt table for CSDM: bits[31:16]-mask; + its[15:0]-address */ +#define PXP2_REG_PGL_INT_CSDM_0 0x1204f4 +#define PXP2_REG_PGL_INT_CSDM_1 0x1204f8 +#define PXP2_REG_PGL_INT_CSDM_2 0x1204fc +#define PXP2_REG_PGL_INT_CSDM_3 0x120500 +#define PXP2_REG_PGL_INT_CSDM_4 0x120504 +#define PXP2_REG_PGL_INT_CSDM_5 0x120508 +#define PXP2_REG_PGL_INT_CSDM_6 0x12050c +#define PXP2_REG_PGL_INT_CSDM_7 0x120510 +/* [RW 32] Inbound interrupt table for TSDM: bits[31:16]-mask; + its[15:0]-address */ +#define PXP2_REG_PGL_INT_TSDM_0 0x120494 +#define PXP2_REG_PGL_INT_TSDM_1 0x120498 +#define PXP2_REG_PGL_INT_TSDM_2 0x12049c +#define PXP2_REG_PGL_INT_TSDM_3 0x1204a0 +#define PXP2_REG_PGL_INT_TSDM_4 0x1204a4 +#define PXP2_REG_PGL_INT_TSDM_5 0x1204a8 +#define PXP2_REG_PGL_INT_TSDM_6 0x1204ac +#define PXP2_REG_PGL_INT_TSDM_7 0x1204b0 +/* [RW 32] Inbound interrupt table for USDM: bits[31:16]-mask; + its[15:0]-address */ +#define PXP2_REG_PGL_INT_USDM_0 0x1204b4 +#define PXP2_REG_PGL_INT_USDM_1 0x1204b8 +#define PXP2_REG_PGL_INT_USDM_2 0x1204bc +#define PXP2_REG_PGL_INT_USDM_3 0x1204c0 +#define PXP2_REG_PGL_INT_USDM_4 0x1204c4 +#define PXP2_REG_PGL_INT_USDM_5 0x1204c8 +#define PXP2_REG_PGL_INT_USDM_6 0x1204cc +#define PXP2_REG_PGL_INT_USDM_7 0x1204d0 +/* [RW 32] Inbound interrupt table for XSDM: bits[31:16]-mask; + its[15:0]-address */ +#define PXP2_REG_PGL_INT_XSDM_0 0x1204d4 +#define PXP2_REG_PGL_INT_XSDM_1 0x1204d8 +#define PXP2_REG_PGL_INT_XSDM_2 0x1204dc +#define PXP2_REG_PGL_INT_XSDM_3 0x1204e0 +#define PXP2_REG_PGL_INT_XSDM_4 0x1204e4 +#define PXP2_REG_PGL_INT_XSDM_5 0x1204e8 +#define PXP2_REG_PGL_INT_XSDM_6 0x1204ec +#define PXP2_REG_PGL_INT_XSDM_7 0x1204f0 +/* [RW 3] this field allows one function to pretend being another function + when accessing any BAR mapped resource within the device. the value of + the field is the number of the function that will be accessed + effectively. after software write to this bit it must read it in order to + know that the new value is updated */ +#define PXP2_REG_PGL_PRETEND_FUNC_F0 0x120674 +#define PXP2_REG_PGL_PRETEND_FUNC_F1 0x120678 +#define PXP2_REG_PGL_PRETEND_FUNC_F2 0x12067c +#define PXP2_REG_PGL_PRETEND_FUNC_F3 0x120680 +#define PXP2_REG_PGL_PRETEND_FUNC_F4 0x120684 +#define PXP2_REG_PGL_PRETEND_FUNC_F5 0x120688 +#define PXP2_REG_PGL_PRETEND_FUNC_F6 0x12068c +#define PXP2_REG_PGL_PRETEND_FUNC_F7 0x120690 +/* [R 1] this bit indicates that a read request was blocked because of + bus_master_en was deasserted */ +#define PXP2_REG_PGL_READ_BLOCKED 0x120568 +#define PXP2_REG_PGL_TAGS_LIMIT 0x1205a8 +/* [R 18] debug only */ +#define PXP2_REG_PGL_TXW_CDTS 0x12052c +/* [R 1] this bit indicates that a write request was blocked because of + bus_master_en was deasserted */ +#define PXP2_REG_PGL_WRITE_BLOCKED 0x120564 +#define PXP2_REG_PSWRQ_BW_ADD1 0x1201c0 +#define PXP2_REG_PSWRQ_BW_ADD10 0x1201e4 +#define PXP2_REG_PSWRQ_BW_ADD11 0x1201e8 +#define PXP2_REG_PSWRQ_BW_ADD2 0x1201c4 +#define PXP2_REG_PSWRQ_BW_ADD28 0x120228 +#define PXP2_REG_PSWRQ_BW_ADD3 0x1201c8 +#define PXP2_REG_PSWRQ_BW_ADD6 0x1201d4 +#define PXP2_REG_PSWRQ_BW_ADD7 0x1201d8 +#define PXP2_REG_PSWRQ_BW_ADD8 0x1201dc +#define PXP2_REG_PSWRQ_BW_ADD9 0x1201e0 +#define PXP2_REG_PSWRQ_BW_CREDIT 0x12032c +#define PXP2_REG_PSWRQ_BW_L1 0x1202b0 +#define PXP2_REG_PSWRQ_BW_L10 0x1202d4 +#define PXP2_REG_PSWRQ_BW_L11 0x1202d8 +#define PXP2_REG_PSWRQ_BW_L2 0x1202b4 +#define PXP2_REG_PSWRQ_BW_L28 0x120318 +#define PXP2_REG_PSWRQ_BW_L3 0x1202b8 +#define PXP2_REG_PSWRQ_BW_L6 0x1202c4 +#define PXP2_REG_PSWRQ_BW_L7 0x1202c8 +#define PXP2_REG_PSWRQ_BW_L8 0x1202cc +#define PXP2_REG_PSWRQ_BW_L9 0x1202d0 +#define PXP2_REG_PSWRQ_BW_RD 0x120324 +#define PXP2_REG_PSWRQ_BW_UB1 0x120238 +#define PXP2_REG_PSWRQ_BW_UB10 0x12025c +#define PXP2_REG_PSWRQ_BW_UB11 0x120260 +#define PXP2_REG_PSWRQ_BW_UB2 0x12023c +#define PXP2_REG_PSWRQ_BW_UB28 0x1202a0 +#define PXP2_REG_PSWRQ_BW_UB3 0x120240 +#define PXP2_REG_PSWRQ_BW_UB6 0x12024c +#define PXP2_REG_PSWRQ_BW_UB7 0x120250 +#define PXP2_REG_PSWRQ_BW_UB8 0x120254 +#define PXP2_REG_PSWRQ_BW_UB9 0x120258 +#define PXP2_REG_PSWRQ_BW_WR 0x120328 +#define PXP2_REG_PSWRQ_CDU0_L2P 0x120000 +#define PXP2_REG_PSWRQ_QM0_L2P 0x120038 +#define PXP2_REG_PSWRQ_SRC0_L2P 0x120054 +#define PXP2_REG_PSWRQ_TM0_L2P 0x12001c +#define PXP2_REG_PSWRQ_TSDM0_L2P 0x1200e0 +/* [RW 32] Interrupt mask register #0 read/write */ +#define PXP2_REG_PXP2_INT_MASK_0 0x120578 +/* [R 32] Interrupt register #0 read */ +#define PXP2_REG_PXP2_INT_STS_0 0x12056c +#define PXP2_REG_PXP2_INT_STS_1 0x120608 +/* [RC 32] Interrupt register #0 read clear */ +#define PXP2_REG_PXP2_INT_STS_CLR_0 0x120570 +/* [RW 32] Parity mask register #0 read/write */ +#define PXP2_REG_PXP2_PRTY_MASK_0 0x120588 +#define PXP2_REG_PXP2_PRTY_MASK_1 0x120598 +/* [R 32] Parity register #0 read */ +#define PXP2_REG_PXP2_PRTY_STS_0 0x12057c +#define PXP2_REG_PXP2_PRTY_STS_1 0x12058c +/* [RC 32] Parity register #0 read clear */ +#define PXP2_REG_PXP2_PRTY_STS_CLR_0 0x120580 +#define PXP2_REG_PXP2_PRTY_STS_CLR_1 0x120590 +/* [R 1] Debug only: The 'almost full' indication from each fifo (gives + indication about backpressure) */ +#define PXP2_REG_RD_ALMOST_FULL_0 0x120424 +/* [R 8] Debug only: The blocks counter - number of unused block ids */ +#define PXP2_REG_RD_BLK_CNT 0x120418 +/* [RW 8] Debug only: Total number of available blocks in Tetris Buffer. + Must be bigger than 6. Normally should not be changed. */ +#define PXP2_REG_RD_BLK_NUM_CFG 0x12040c +/* [RW 2] CDU byte swapping mode configuration for master read requests */ +#define PXP2_REG_RD_CDURD_SWAP_MODE 0x120404 +/* [RW 1] When '1'; inputs to the PSWRD block are ignored */ +#define PXP2_REG_RD_DISABLE_INPUTS 0x120374 +/* [R 1] PSWRD internal memories initialization is done */ +#define PXP2_REG_RD_INIT_DONE 0x120370 +/* [RW 8] The maximum number of blocks in Tetris Buffer that can be + allocated for vq10 */ +#define PXP2_REG_RD_MAX_BLKS_VQ10 0x1203a0 +/* [RW 8] The maximum number of blocks in Tetris Buffer that can be + allocated for vq11 */ +#define PXP2_REG_RD_MAX_BLKS_VQ11 0x1203a4 +/* [RW 8] The maximum number of blocks in Tetris Buffer that can be + allocated for vq17 */ +#define PXP2_REG_RD_MAX_BLKS_VQ17 0x1203bc +/* [RW 8] The maximum number of blocks in Tetris Buffer that can be + allocated for vq18 */ +#define PXP2_REG_RD_MAX_BLKS_VQ18 0x1203c0 +/* [RW 8] The maximum number of blocks in Tetris Buffer that can be + allocated for vq19 */ +#define PXP2_REG_RD_MAX_BLKS_VQ19 0x1203c4 +/* [RW 8] The maximum number of blocks in Tetris Buffer that can be + allocated for vq22 */ +#define PXP2_REG_RD_MAX_BLKS_VQ22 0x1203d0 +/* [RW 8] The maximum number of blocks in Tetris Buffer that can be + allocated for vq25 */ +#define PXP2_REG_RD_MAX_BLKS_VQ25 0x1203dc +/* [RW 8] The maximum number of blocks in Tetris Buffer that can be + allocated for vq6 */ +#define PXP2_REG_RD_MAX_BLKS_VQ6 0x120390 +/* [RW 8] The maximum number of blocks in Tetris Buffer that can be + allocated for vq9 */ +#define PXP2_REG_RD_MAX_BLKS_VQ9 0x12039c +/* [RW 2] PBF byte swapping mode configuration for master read requests */ +#define PXP2_REG_RD_PBF_SWAP_MODE 0x1203f4 +/* [R 1] Debug only: Indication if delivery ports are idle */ +#define PXP2_REG_RD_PORT_IS_IDLE_0 0x12041c +#define PXP2_REG_RD_PORT_IS_IDLE_1 0x120420 +/* [RW 2] QM byte swapping mode configuration for master read requests */ +#define PXP2_REG_RD_QM_SWAP_MODE 0x1203f8 +/* [R 7] Debug only: The SR counter - number of unused sub request ids */ +#define PXP2_REG_RD_SR_CNT 0x120414 +/* [RW 2] SRC byte swapping mode configuration for master read requests */ +#define PXP2_REG_RD_SRC_SWAP_MODE 0x120400 +/* [RW 7] Debug only: Total number of available PCI read sub-requests. Must + be bigger than 1. Normally should not be changed. */ +#define PXP2_REG_RD_SR_NUM_CFG 0x120408 +/* [RW 1] Signals the PSWRD block to start initializing internal memories */ +#define PXP2_REG_RD_START_INIT 0x12036c +/* [RW 2] TM byte swapping mode configuration for master read requests */ +#define PXP2_REG_RD_TM_SWAP_MODE 0x1203fc +/* [RW 10] Bandwidth addition to VQ0 write requests */ +#define PXP2_REG_RQ_BW_RD_ADD0 0x1201bc +/* [RW 10] Bandwidth addition to VQ12 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD12 0x1201ec +/* [RW 10] Bandwidth addition to VQ13 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD13 0x1201f0 +/* [RW 10] Bandwidth addition to VQ14 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD14 0x1201f4 +/* [RW 10] Bandwidth addition to VQ15 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD15 0x1201f8 +/* [RW 10] Bandwidth addition to VQ16 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD16 0x1201fc +/* [RW 10] Bandwidth addition to VQ17 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD17 0x120200 +/* [RW 10] Bandwidth addition to VQ18 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD18 0x120204 +/* [RW 10] Bandwidth addition to VQ19 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD19 0x120208 +/* [RW 10] Bandwidth addition to VQ20 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD20 0x12020c +/* [RW 10] Bandwidth addition to VQ22 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD22 0x120210 +/* [RW 10] Bandwidth addition to VQ23 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD23 0x120214 +/* [RW 10] Bandwidth addition to VQ24 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD24 0x120218 +/* [RW 10] Bandwidth addition to VQ25 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD25 0x12021c +/* [RW 10] Bandwidth addition to VQ26 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD26 0x120220 +/* [RW 10] Bandwidth addition to VQ27 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD27 0x120224 +/* [RW 10] Bandwidth addition to VQ4 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD4 0x1201cc +/* [RW 10] Bandwidth addition to VQ5 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD5 0x1201d0 +/* [RW 10] Bandwidth Typical L for VQ0 Read requests */ +#define PXP2_REG_RQ_BW_RD_L0 0x1202ac +/* [RW 10] Bandwidth Typical L for VQ12 Read requests */ +#define PXP2_REG_RQ_BW_RD_L12 0x1202dc +/* [RW 10] Bandwidth Typical L for VQ13 Read requests */ +#define PXP2_REG_RQ_BW_RD_L13 0x1202e0 +/* [RW 10] Bandwidth Typical L for VQ14 Read requests */ +#define PXP2_REG_RQ_BW_RD_L14 0x1202e4 +/* [RW 10] Bandwidth Typical L for VQ15 Read requests */ +#define PXP2_REG_RQ_BW_RD_L15 0x1202e8 +/* [RW 10] Bandwidth Typical L for VQ16 Read requests */ +#define PXP2_REG_RQ_BW_RD_L16 0x1202ec +/* [RW 10] Bandwidth Typical L for VQ17 Read requests */ +#define PXP2_REG_RQ_BW_RD_L17 0x1202f0 +/* [RW 10] Bandwidth Typical L for VQ18 Read requests */ +#define PXP2_REG_RQ_BW_RD_L18 0x1202f4 +/* [RW 10] Bandwidth Typical L for VQ19 Read requests */ +#define PXP2_REG_RQ_BW_RD_L19 0x1202f8 +/* [RW 10] Bandwidth Typical L for VQ20 Read requests */ +#define PXP2_REG_RQ_BW_RD_L20 0x1202fc +/* [RW 10] Bandwidth Typical L for VQ22 Read requests */ +#define PXP2_REG_RQ_BW_RD_L22 0x120300 +/* [RW 10] Bandwidth Typical L for VQ23 Read requests */ +#define PXP2_REG_RQ_BW_RD_L23 0x120304 +/* [RW 10] Bandwidth Typical L for VQ24 Read requests */ +#define PXP2_REG_RQ_BW_RD_L24 0x120308 +/* [RW 10] Bandwidth Typical L for VQ25 Read requests */ +#define PXP2_REG_RQ_BW_RD_L25 0x12030c +/* [RW 10] Bandwidth Typical L for VQ26 Read requests */ +#define PXP2_REG_RQ_BW_RD_L26 0x120310 +/* [RW 10] Bandwidth Typical L for VQ27 Read requests */ +#define PXP2_REG_RQ_BW_RD_L27 0x120314 +/* [RW 10] Bandwidth Typical L for VQ4 Read requests */ +#define PXP2_REG_RQ_BW_RD_L4 0x1202bc +/* [RW 10] Bandwidth Typical L for VQ5 Read- currently not used */ +#define PXP2_REG_RQ_BW_RD_L5 0x1202c0 +/* [RW 7] Bandwidth upper bound for VQ0 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND0 0x120234 +/* [RW 7] Bandwidth upper bound for VQ12 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND12 0x120264 +/* [RW 7] Bandwidth upper bound for VQ13 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND13 0x120268 +/* [RW 7] Bandwidth upper bound for VQ14 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND14 0x12026c +/* [RW 7] Bandwidth upper bound for VQ15 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND15 0x120270 +/* [RW 7] Bandwidth upper bound for VQ16 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND16 0x120274 +/* [RW 7] Bandwidth upper bound for VQ17 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND17 0x120278 +/* [RW 7] Bandwidth upper bound for VQ18 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND18 0x12027c +/* [RW 7] Bandwidth upper bound for VQ19 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND19 0x120280 +/* [RW 7] Bandwidth upper bound for VQ20 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND20 0x120284 +/* [RW 7] Bandwidth upper bound for VQ22 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND22 0x120288 +/* [RW 7] Bandwidth upper bound for VQ23 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND23 0x12028c +/* [RW 7] Bandwidth upper bound for VQ24 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND24 0x120290 +/* [RW 7] Bandwidth upper bound for VQ25 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND25 0x120294 +/* [RW 7] Bandwidth upper bound for VQ26 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND26 0x120298 +/* [RW 7] Bandwidth upper bound for VQ27 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND27 0x12029c +/* [RW 7] Bandwidth upper bound for VQ4 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND4 0x120244 +/* [RW 7] Bandwidth upper bound for VQ5 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND5 0x120248 +/* [RW 10] Bandwidth addition to VQ29 write requests */ +#define PXP2_REG_RQ_BW_WR_ADD29 0x12022c +/* [RW 10] Bandwidth addition to VQ30 write requests */ +#define PXP2_REG_RQ_BW_WR_ADD30 0x120230 +/* [RW 10] Bandwidth Typical L for VQ29 Write requests */ +#define PXP2_REG_RQ_BW_WR_L29 0x12031c +/* [RW 10] Bandwidth Typical L for VQ30 Write requests */ +#define PXP2_REG_RQ_BW_WR_L30 0x120320 +/* [RW 7] Bandwidth upper bound for VQ29 */ +#define PXP2_REG_RQ_BW_WR_UBOUND29 0x1202a4 +/* [RW 7] Bandwidth upper bound for VQ30 */ +#define PXP2_REG_RQ_BW_WR_UBOUND30 0x1202a8 +/* [RW 18] external first_mem_addr field in L2P table for CDU module port 0 */ +#define PXP2_REG_RQ_CDU0_EFIRST_MEM_ADDR 0x120008 +/* [RW 2] Endian mode for cdu */ +#define PXP2_REG_RQ_CDU_ENDIAN_M 0x1201a0 +#define PXP2_REG_RQ_CDU_FIRST_ILT 0x12061c +#define PXP2_REG_RQ_CDU_LAST_ILT 0x120620 +/* [RW 3] page size in L2P table for CDU module; -4k; -8k; -16k; -32k; -64k; + -128k */ +#define PXP2_REG_RQ_CDU_P_SIZE 0x120018 +/* [R 1] 1' indicates that the requester has finished its internal + configuration */ +#define PXP2_REG_RQ_CFG_DONE 0x1201b4 +/* [RW 2] Endian mode for debug */ +#define PXP2_REG_RQ_DBG_ENDIAN_M 0x1201a4 +/* [RW 1] When '1'; requests will enter input buffers but wont get out + towards the glue */ +#define PXP2_REG_RQ_DISABLE_INPUTS 0x120330 +/* [RW 4] Determines alignment of write SRs when a request is split into + * several SRs. 0 - 8B aligned. 1 - 64B aligned. 2 - 128B aligned. 3 - 256B + * aligned. 4 - 512B aligned. */ +#define PXP2_REG_RQ_DRAM_ALIGN 0x1205b0 +/* [RW 4] Determines alignment of read SRs when a request is split into + * several SRs. 0 - 8B aligned. 1 - 64B aligned. 2 - 128B aligned. 3 - 256B + * aligned. 4 - 512B aligned. */ +#define PXP2_REG_RQ_DRAM_ALIGN_RD 0x12092c +/* [RW 1] when set the new alignment method (E2) will be applied; when reset + * the original alignment method (E1 E1H) will be applied */ +#define PXP2_REG_RQ_DRAM_ALIGN_SEL 0x120930 +/* [RW 1] If 1 ILT failiue will not result in ELT access; An interrupt will + be asserted */ +#define PXP2_REG_RQ_ELT_DISABLE 0x12066c +/* [RW 2] Endian mode for hc */ +#define PXP2_REG_RQ_HC_ENDIAN_M 0x1201a8 +/* [RW 1] when '0' ILT logic will work as in A0; otherwise B0; for back + compatibility needs; Note that different registers are used per mode */ +#define PXP2_REG_RQ_ILT_MODE 0x1205b4 +/* [WB 53] Onchip address table */ +#define PXP2_REG_RQ_ONCHIP_AT 0x122000 +/* [WB 53] Onchip address table - B0 */ +#define PXP2_REG_RQ_ONCHIP_AT_B0 0x128000 +/* [RW 13] Pending read limiter threshold; in Dwords */ +#define PXP2_REG_RQ_PDR_LIMIT 0x12033c +/* [RW 2] Endian mode for qm */ +#define PXP2_REG_RQ_QM_ENDIAN_M 0x120194 +#define PXP2_REG_RQ_QM_FIRST_ILT 0x120634 +#define PXP2_REG_RQ_QM_LAST_ILT 0x120638 +/* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k; + -128k */ +#define PXP2_REG_RQ_QM_P_SIZE 0x120050 +/* [RW 1] 1' indicates that the RBC has finished configuring the PSWRQ */ +#define PXP2_REG_RQ_RBC_DONE 0x1201b0 +/* [RW 3] Max burst size filed for read requests port 0; 000 - 128B; + 001:256B; 010: 512B; 11:1K:100:2K; 01:4K */ +#define PXP2_REG_RQ_RD_MBS0 0x120160 +/* [RW 3] Max burst size filed for read requests port 1; 000 - 128B; + 001:256B; 010: 512B; 11:1K:100:2K; 01:4K */ +#define PXP2_REG_RQ_RD_MBS1 0x120168 +/* [RW 2] Endian mode for src */ +#define PXP2_REG_RQ_SRC_ENDIAN_M 0x12019c +#define PXP2_REG_RQ_SRC_FIRST_ILT 0x12063c +#define PXP2_REG_RQ_SRC_LAST_ILT 0x120640 +/* [RW 3] page size in L2P table for SRC module; -4k; -8k; -16k; -32k; -64k; + -128k */ +#define PXP2_REG_RQ_SRC_P_SIZE 0x12006c +/* [RW 2] Endian mode for tm */ +#define PXP2_REG_RQ_TM_ENDIAN_M 0x120198 +#define PXP2_REG_RQ_TM_FIRST_ILT 0x120644 +#define PXP2_REG_RQ_TM_LAST_ILT 0x120648 +/* [RW 3] page size in L2P table for TM module; -4k; -8k; -16k; -32k; -64k; + -128k */ +#define PXP2_REG_RQ_TM_P_SIZE 0x120034 +/* [R 5] Number of entries in the ufifo; his fifo has l2p completions */ +#define PXP2_REG_RQ_UFIFO_NUM_OF_ENTRY 0x12080c +/* [RW 18] external first_mem_addr field in L2P table for USDM module port 0 */ +#define PXP2_REG_RQ_USDM0_EFIRST_MEM_ADDR 0x120094 +/* [R 8] Number of entries occupied by vq 0 in pswrq memory */ +#define PXP2_REG_RQ_VQ0_ENTRY_CNT 0x120810 +/* [R 8] Number of entries occupied by vq 10 in pswrq memory */ +#define PXP2_REG_RQ_VQ10_ENTRY_CNT 0x120818 +/* [R 8] Number of entries occupied by vq 11 in pswrq memory */ +#define PXP2_REG_RQ_VQ11_ENTRY_CNT 0x120820 +/* [R 8] Number of entries occupied by vq 12 in pswrq memory */ +#define PXP2_REG_RQ_VQ12_ENTRY_CNT 0x120828 +/* [R 8] Number of entries occupied by vq 13 in pswrq memory */ +#define PXP2_REG_RQ_VQ13_ENTRY_CNT 0x120830 +/* [R 8] Number of entries occupied by vq 14 in pswrq memory */ +#define PXP2_REG_RQ_VQ14_ENTRY_CNT 0x120838 +/* [R 8] Number of entries occupied by vq 15 in pswrq memory */ +#define PXP2_REG_RQ_VQ15_ENTRY_CNT 0x120840 +/* [R 8] Number of entries occupied by vq 16 in pswrq memory */ +#define PXP2_REG_RQ_VQ16_ENTRY_CNT 0x120848 +/* [R 8] Number of entries occupied by vq 17 in pswrq memory */ +#define PXP2_REG_RQ_VQ17_ENTRY_CNT 0x120850 +/* [R 8] Number of entries occupied by vq 18 in pswrq memory */ +#define PXP2_REG_RQ_VQ18_ENTRY_CNT 0x120858 +/* [R 8] Number of entries occupied by vq 19 in pswrq memory */ +#define PXP2_REG_RQ_VQ19_ENTRY_CNT 0x120860 +/* [R 8] Number of entries occupied by vq 1 in pswrq memory */ +#define PXP2_REG_RQ_VQ1_ENTRY_CNT 0x120868 +/* [R 8] Number of entries occupied by vq 20 in pswrq memory */ +#define PXP2_REG_RQ_VQ20_ENTRY_CNT 0x120870 +/* [R 8] Number of entries occupied by vq 21 in pswrq memory */ +#define PXP2_REG_RQ_VQ21_ENTRY_CNT 0x120878 +/* [R 8] Number of entries occupied by vq 22 in pswrq memory */ +#define PXP2_REG_RQ_VQ22_ENTRY_CNT 0x120880 +/* [R 8] Number of entries occupied by vq 23 in pswrq memory */ +#define PXP2_REG_RQ_VQ23_ENTRY_CNT 0x120888 +/* [R 8] Number of entries occupied by vq 24 in pswrq memory */ +#define PXP2_REG_RQ_VQ24_ENTRY_CNT 0x120890 +/* [R 8] Number of entries occupied by vq 25 in pswrq memory */ +#define PXP2_REG_RQ_VQ25_ENTRY_CNT 0x120898 +/* [R 8] Number of entries occupied by vq 26 in pswrq memory */ +#define PXP2_REG_RQ_VQ26_ENTRY_CNT 0x1208a0 +/* [R 8] Number of entries occupied by vq 27 in pswrq memory */ +#define PXP2_REG_RQ_VQ27_ENTRY_CNT 0x1208a8 +/* [R 8] Number of entries occupied by vq 28 in pswrq memory */ +#define PXP2_REG_RQ_VQ28_ENTRY_CNT 0x1208b0 +/* [R 8] Number of entries occupied by vq 29 in pswrq memory */ +#define PXP2_REG_RQ_VQ29_ENTRY_CNT 0x1208b8 +/* [R 8] Number of entries occupied by vq 2 in pswrq memory */ +#define PXP2_REG_RQ_VQ2_ENTRY_CNT 0x1208c0 +/* [R 8] Number of entries occupied by vq 30 in pswrq memory */ +#define PXP2_REG_RQ_VQ30_ENTRY_CNT 0x1208c8 +/* [R 8] Number of entries occupied by vq 31 in pswrq memory */ +#define PXP2_REG_RQ_VQ31_ENTRY_CNT 0x1208d0 +/* [R 8] Number of entries occupied by vq 3 in pswrq memory */ +#define PXP2_REG_RQ_VQ3_ENTRY_CNT 0x1208d8 +/* [R 8] Number of entries occupied by vq 4 in pswrq memory */ +#define PXP2_REG_RQ_VQ4_ENTRY_CNT 0x1208e0 +/* [R 8] Number of entries occupied by vq 5 in pswrq memory */ +#define PXP2_REG_RQ_VQ5_ENTRY_CNT 0x1208e8 +/* [R 8] Number of entries occupied by vq 6 in pswrq memory */ +#define PXP2_REG_RQ_VQ6_ENTRY_CNT 0x1208f0 +/* [R 8] Number of entries occupied by vq 7 in pswrq memory */ +#define PXP2_REG_RQ_VQ7_ENTRY_CNT 0x1208f8 +/* [R 8] Number of entries occupied by vq 8 in pswrq memory */ +#define PXP2_REG_RQ_VQ8_ENTRY_CNT 0x120900 +/* [R 8] Number of entries occupied by vq 9 in pswrq memory */ +#define PXP2_REG_RQ_VQ9_ENTRY_CNT 0x120908 +/* [RW 3] Max burst size filed for write requests port 0; 000 - 128B; + 001:256B; 010: 512B; */ +#define PXP2_REG_RQ_WR_MBS0 0x12015c +/* [RW 3] Max burst size filed for write requests port 1; 000 - 128B; + 001:256B; 010: 512B; */ +#define PXP2_REG_RQ_WR_MBS1 0x120164 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_CDU_MPS 0x1205f0 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_CSDM_MPS 0x1205d0 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_DBG_MPS 0x1205e8 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_DMAE_MPS 0x1205ec +/* [RW 10] if Number of entries in dmae fifo will be higher than this + threshold then has_payload indication will be asserted; the default value + should be equal to > write MBS size! */ +#define PXP2_REG_WR_DMAE_TH 0x120368 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_HC_MPS 0x1205c8 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_QM_MPS 0x1205dc +/* [RW 1] 0 - working in A0 mode; - working in B0 mode */ +#define PXP2_REG_WR_REV_MODE 0x120670 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_SRC_MPS 0x1205e4 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_TM_MPS 0x1205e0 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_TSDM_MPS 0x1205d4 +/* [RW 10] if Number of entries in usdmdp fifo will be higher than this + threshold then has_payload indication will be asserted; the default value + should be equal to > write MBS size! */ +#define PXP2_REG_WR_USDMDP_TH 0x120348 +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_USDM_MPS 0x1205cc +/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the + buffer reaches this number has_payload will be asserted */ +#define PXP2_REG_WR_XSDM_MPS 0x1205d8 +/* [R 1] debug only: Indication if PSWHST arbiter is idle */ +#define PXP_REG_HST_ARB_IS_IDLE 0x103004 +/* [R 8] debug only: A bit mask for all PSWHST arbiter clients. '1' means + this client is waiting for the arbiter. */ +#define PXP_REG_HST_CLIENTS_WAITING_TO_ARB 0x103008 +/* [RW 1] When 1; doorbells are discarded and not passed to doorbell queue + block. Should be used for close the gates. */ +#define PXP_REG_HST_DISCARD_DOORBELLS 0x1030a4 +/* [R 1] debug only: '1' means this PSWHST is discarding doorbells. This bit + should update according to 'hst_discard_doorbells' register when the state + machine is idle */ +#define PXP_REG_HST_DISCARD_DOORBELLS_STATUS 0x1030a0 +/* [RW 1] When 1; new internal writes arriving to the block are discarded. + Should be used for close the gates. */ +#define PXP_REG_HST_DISCARD_INTERNAL_WRITES 0x1030a8 +/* [R 6] debug only: A bit mask for all PSWHST internal write clients. '1' + means this PSWHST is discarding inputs from this client. Each bit should + update according to 'hst_discard_internal_writes' register when the state + machine is idle. */ +#define PXP_REG_HST_DISCARD_INTERNAL_WRITES_STATUS 0x10309c +/* [WB 160] Used for initialization of the inbound interrupts memory */ +#define PXP_REG_HST_INBOUND_INT 0x103800 +/* [RW 32] Interrupt mask register #0 read/write */ +#define PXP_REG_PXP_INT_MASK_0 0x103074 +#define PXP_REG_PXP_INT_MASK_1 0x103084 +/* [R 32] Interrupt register #0 read */ +#define PXP_REG_PXP_INT_STS_0 0x103068 +#define PXP_REG_PXP_INT_STS_1 0x103078 +/* [RC 32] Interrupt register #0 read clear */ +#define PXP_REG_PXP_INT_STS_CLR_0 0x10306c +#define PXP_REG_PXP_INT_STS_CLR_1 0x10307c +/* [RW 27] Parity mask register #0 read/write */ +#define PXP_REG_PXP_PRTY_MASK 0x103094 +/* [R 26] Parity register #0 read */ +#define PXP_REG_PXP_PRTY_STS 0x103088 +/* [RC 27] Parity register #0 read clear */ +#define PXP_REG_PXP_PRTY_STS_CLR 0x10308c +/* [RW 4] The activity counter initial increment value sent in the load + request */ +#define QM_REG_ACTCTRINITVAL_0 0x168040 +#define QM_REG_ACTCTRINITVAL_1 0x168044 +#define QM_REG_ACTCTRINITVAL_2 0x168048 +#define QM_REG_ACTCTRINITVAL_3 0x16804c +/* [RW 32] The base logical address (in bytes) of each physical queue. The + index I represents the physical queue number. The 12 lsbs are ignore and + considered zero so practically there are only 20 bits in this register; + queues 63-0 */ +#define QM_REG_BASEADDR 0x168900 +/* [RW 32] The base logical address (in bytes) of each physical queue. The + index I represents the physical queue number. The 12 lsbs are ignore and + considered zero so practically there are only 20 bits in this register; + queues 127-64 */ +#define QM_REG_BASEADDR_EXT_A 0x16e100 +/* [RW 16] The byte credit cost for each task. This value is for both ports */ +#define QM_REG_BYTECRDCOST 0x168234 +/* [RW 16] The initial byte credit value for both ports. */ +#define QM_REG_BYTECRDINITVAL 0x168238 +/* [RW 32] A bit per physical queue. If the bit is cleared then the physical + queue uses port 0 else it uses port 1; queues 31-0 */ +#define QM_REG_BYTECRDPORT_LSB 0x168228 +/* [RW 32] A bit per physical queue. If the bit is cleared then the physical + queue uses port 0 else it uses port 1; queues 95-64 */ +#define QM_REG_BYTECRDPORT_LSB_EXT_A 0x16e520 +/* [RW 32] A bit per physical queue. If the bit is cleared then the physical + queue uses port 0 else it uses port 1; queues 63-32 */ +#define QM_REG_BYTECRDPORT_MSB 0x168224 +/* [RW 32] A bit per physical queue. If the bit is cleared then the physical + queue uses port 0 else it uses port 1; queues 127-96 */ +#define QM_REG_BYTECRDPORT_MSB_EXT_A 0x16e51c +/* [RW 16] The byte credit value that if above the QM is considered almost + full */ +#define QM_REG_BYTECREDITAFULLTHR 0x168094 +/* [RW 4] The initial credit for interface */ +#define QM_REG_CMINITCRD_0 0x1680cc +#define QM_REG_BYTECRDCMDQ_0 0x16e6e8 +#define QM_REG_CMINITCRD_1 0x1680d0 +#define QM_REG_CMINITCRD_2 0x1680d4 +#define QM_REG_CMINITCRD_3 0x1680d8 +#define QM_REG_CMINITCRD_4 0x1680dc +#define QM_REG_CMINITCRD_5 0x1680e0 +#define QM_REG_CMINITCRD_6 0x1680e4 +#define QM_REG_CMINITCRD_7 0x1680e8 +/* [RW 8] A mask bit per CM interface. If this bit is 0 then this interface + is masked */ +#define QM_REG_CMINTEN 0x1680ec +/* [RW 12] A bit vector which indicates which one of the queues are tied to + interface 0 */ +#define QM_REG_CMINTVOQMASK_0 0x1681f4 +#define QM_REG_CMINTVOQMASK_1 0x1681f8 +#define QM_REG_CMINTVOQMASK_2 0x1681fc +#define QM_REG_CMINTVOQMASK_3 0x168200 +#define QM_REG_CMINTVOQMASK_4 0x168204 +#define QM_REG_CMINTVOQMASK_5 0x168208 +#define QM_REG_CMINTVOQMASK_6 0x16820c +#define QM_REG_CMINTVOQMASK_7 0x168210 +/* [RW 20] The number of connections divided by 16 which dictates the size + of each queue which belongs to even function number. */ +#define QM_REG_CONNNUM_0 0x168020 +/* [R 6] Keep the fill level of the fifo from write client 4 */ +#define QM_REG_CQM_WRC_FIFOLVL 0x168018 +/* [RW 8] The context regions sent in the CFC load request */ +#define QM_REG_CTXREG_0 0x168030 +#define QM_REG_CTXREG_1 0x168034 +#define QM_REG_CTXREG_2 0x168038 +#define QM_REG_CTXREG_3 0x16803c +/* [RW 12] The VOQ mask used to select the VOQs which needs to be full for + bypass enable */ +#define QM_REG_ENBYPVOQMASK 0x16823c +/* [RW 32] A bit mask per each physical queue. If a bit is set then the + physical queue uses the byte credit; queues 31-0 */ +#define QM_REG_ENBYTECRD_LSB 0x168220 +/* [RW 32] A bit mask per each physical queue. If a bit is set then the + physical queue uses the byte credit; queues 95-64 */ +#define QM_REG_ENBYTECRD_LSB_EXT_A 0x16e518 +/* [RW 32] A bit mask per each physical queue. If a bit is set then the + physical queue uses the byte credit; queues 63-32 */ +#define QM_REG_ENBYTECRD_MSB 0x16821c +/* [RW 32] A bit mask per each physical queue. If a bit is set then the + physical queue uses the byte credit; queues 127-96 */ +#define QM_REG_ENBYTECRD_MSB_EXT_A 0x16e514 +/* [RW 4] If cleared then the secondary interface will not be served by the + RR arbiter */ +#define QM_REG_ENSEC 0x1680f0 +/* [RW 32] NA */ +#define QM_REG_FUNCNUMSEL_LSB 0x168230 +/* [RW 32] NA */ +#define QM_REG_FUNCNUMSEL_MSB 0x16822c +/* [RW 32] A mask register to mask the Almost empty signals which will not + be use for the almost empty indication to the HW block; queues 31:0 */ +#define QM_REG_HWAEMPTYMASK_LSB 0x168218 +/* [RW 32] A mask register to mask the Almost empty signals which will not + be use for the almost empty indication to the HW block; queues 95-64 */ +#define QM_REG_HWAEMPTYMASK_LSB_EXT_A 0x16e510 +/* [RW 32] A mask register to mask the Almost empty signals which will not + be use for the almost empty indication to the HW block; queues 63:32 */ +#define QM_REG_HWAEMPTYMASK_MSB 0x168214 +/* [RW 32] A mask register to mask the Almost empty signals which will not + be use for the almost empty indication to the HW block; queues 127-96 */ +#define QM_REG_HWAEMPTYMASK_MSB_EXT_A 0x16e50c +/* [RW 4] The number of outstanding request to CFC */ +#define QM_REG_OUTLDREQ 0x168804 +/* [RC 1] A flag to indicate that overflow error occurred in one of the + queues. */ +#define QM_REG_OVFERROR 0x16805c +/* [RC 7] the Q where the overflow occurs */ +#define QM_REG_OVFQNUM 0x168058 +/* [R 16] Pause state for physical queues 15-0 */ +#define QM_REG_PAUSESTATE0 0x168410 +/* [R 16] Pause state for physical queues 31-16 */ +#define QM_REG_PAUSESTATE1 0x168414 +/* [R 16] Pause state for physical queues 47-32 */ +#define QM_REG_PAUSESTATE2 0x16e684 +/* [R 16] Pause state for physical queues 63-48 */ +#define QM_REG_PAUSESTATE3 0x16e688 +/* [R 16] Pause state for physical queues 79-64 */ +#define QM_REG_PAUSESTATE4 0x16e68c +/* [R 16] Pause state for physical queues 95-80 */ +#define QM_REG_PAUSESTATE5 0x16e690 +/* [R 16] Pause state for physical queues 111-96 */ +#define QM_REG_PAUSESTATE6 0x16e694 +/* [R 16] Pause state for physical queues 127-112 */ +#define QM_REG_PAUSESTATE7 0x16e698 +/* [RW 2] The PCI attributes field used in the PCI request. */ +#define QM_REG_PCIREQAT 0x168054 +#define QM_REG_PF_EN 0x16e70c +/* [R 24] The number of tasks stored in the QM for the PF. only even + * functions are valid in E2 (odd I registers will be hard wired to 0) */ +#define QM_REG_PF_USG_CNT_0 0x16e040 +/* [R 16] NOT USED */ +#define QM_REG_PORT0BYTECRD 0x168300 +/* [R 16] The byte credit of port 1 */ +#define QM_REG_PORT1BYTECRD 0x168304 +/* [RW 3] pci function number of queues 15-0 */ +#define QM_REG_PQ2PCIFUNC_0 0x16e6bc +#define QM_REG_PQ2PCIFUNC_1 0x16e6c0 +#define QM_REG_PQ2PCIFUNC_2 0x16e6c4 +#define QM_REG_PQ2PCIFUNC_3 0x16e6c8 +#define QM_REG_PQ2PCIFUNC_4 0x16e6cc +#define QM_REG_PQ2PCIFUNC_5 0x16e6d0 +#define QM_REG_PQ2PCIFUNC_6 0x16e6d4 +#define QM_REG_PQ2PCIFUNC_7 0x16e6d8 +/* [WB 54] Pointer Table Memory for queues 63-0; The mapping is as follow: + ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read + bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */ +#define QM_REG_PTRTBL 0x168a00 +/* [WB 54] Pointer Table Memory for queues 127-64; The mapping is as follow: + ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read + bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */ +#define QM_REG_PTRTBL_EXT_A 0x16e200 +/* [RW 2] Interrupt mask register #0 read/write */ +#define QM_REG_QM_INT_MASK 0x168444 +/* [R 2] Interrupt register #0 read */ +#define QM_REG_QM_INT_STS 0x168438 +/* [RW 12] Parity mask register #0 read/write */ +#define QM_REG_QM_PRTY_MASK 0x168454 +/* [R 12] Parity register #0 read */ +#define QM_REG_QM_PRTY_STS 0x168448 +/* [RC 12] Parity register #0 read clear */ +#define QM_REG_QM_PRTY_STS_CLR 0x16844c +/* [R 32] Current queues in pipeline: Queues from 32 to 63 */ +#define QM_REG_QSTATUS_HIGH 0x16802c +/* [R 32] Current queues in pipeline: Queues from 96 to 127 */ +#define QM_REG_QSTATUS_HIGH_EXT_A 0x16e408 +/* [R 32] Current queues in pipeline: Queues from 0 to 31 */ +#define QM_REG_QSTATUS_LOW 0x168028 +/* [R 32] Current queues in pipeline: Queues from 64 to 95 */ +#define QM_REG_QSTATUS_LOW_EXT_A 0x16e404 +/* [R 24] The number of tasks queued for each queue; queues 63-0 */ +#define QM_REG_QTASKCTR_0 0x168308 +/* [R 24] The number of tasks queued for each queue; queues 127-64 */ +#define QM_REG_QTASKCTR_EXT_A_0 0x16e584 +/* [RW 4] Queue tied to VOQ */ +#define QM_REG_QVOQIDX_0 0x1680f4 +#define QM_REG_QVOQIDX_10 0x16811c +#define QM_REG_QVOQIDX_100 0x16e49c +#define QM_REG_QVOQIDX_101 0x16e4a0 +#define QM_REG_QVOQIDX_102 0x16e4a4 +#define QM_REG_QVOQIDX_103 0x16e4a8 +#define QM_REG_QVOQIDX_104 0x16e4ac +#define QM_REG_QVOQIDX_105 0x16e4b0 +#define QM_REG_QVOQIDX_106 0x16e4b4 +#define QM_REG_QVOQIDX_107 0x16e4b8 +#define QM_REG_QVOQIDX_108 0x16e4bc +#define QM_REG_QVOQIDX_109 0x16e4c0 +#define QM_REG_QVOQIDX_11 0x168120 +#define QM_REG_QVOQIDX_110 0x16e4c4 +#define QM_REG_QVOQIDX_111 0x16e4c8 +#define QM_REG_QVOQIDX_112 0x16e4cc +#define QM_REG_QVOQIDX_113 0x16e4d0 +#define QM_REG_QVOQIDX_114 0x16e4d4 +#define QM_REG_QVOQIDX_115 0x16e4d8 +#define QM_REG_QVOQIDX_116 0x16e4dc +#define QM_REG_QVOQIDX_117 0x16e4e0 +#define QM_REG_QVOQIDX_118 0x16e4e4 +#define QM_REG_QVOQIDX_119 0x16e4e8 +#define QM_REG_QVOQIDX_12 0x168124 +#define QM_REG_QVOQIDX_120 0x16e4ec +#define QM_REG_QVOQIDX_121 0x16e4f0 +#define QM_REG_QVOQIDX_122 0x16e4f4 +#define QM_REG_QVOQIDX_123 0x16e4f8 +#define QM_REG_QVOQIDX_124 0x16e4fc +#define QM_REG_QVOQIDX_125 0x16e500 +#define QM_REG_QVOQIDX_126 0x16e504 +#define QM_REG_QVOQIDX_127 0x16e508 +#define QM_REG_QVOQIDX_13 0x168128 +#define QM_REG_QVOQIDX_14 0x16812c +#define QM_REG_QVOQIDX_15 0x168130 +#define QM_REG_QVOQIDX_16 0x168134 +#define QM_REG_QVOQIDX_17 0x168138 +#define QM_REG_QVOQIDX_21 0x168148 +#define QM_REG_QVOQIDX_22 0x16814c +#define QM_REG_QVOQIDX_23 0x168150 +#define QM_REG_QVOQIDX_24 0x168154 +#define QM_REG_QVOQIDX_25 0x168158 +#define QM_REG_QVOQIDX_26 0x16815c +#define QM_REG_QVOQIDX_27 0x168160 +#define QM_REG_QVOQIDX_28 0x168164 +#define QM_REG_QVOQIDX_29 0x168168 +#define QM_REG_QVOQIDX_30 0x16816c +#define QM_REG_QVOQIDX_31 0x168170 +#define QM_REG_QVOQIDX_32 0x168174 +#define QM_REG_QVOQIDX_33 0x168178 +#define QM_REG_QVOQIDX_34 0x16817c +#define QM_REG_QVOQIDX_35 0x168180 +#define QM_REG_QVOQIDX_36 0x168184 +#define QM_REG_QVOQIDX_37 0x168188 +#define QM_REG_QVOQIDX_38 0x16818c +#define QM_REG_QVOQIDX_39 0x168190 +#define QM_REG_QVOQIDX_40 0x168194 +#define QM_REG_QVOQIDX_41 0x168198 +#define QM_REG_QVOQIDX_42 0x16819c +#define QM_REG_QVOQIDX_43 0x1681a0 +#define QM_REG_QVOQIDX_44 0x1681a4 +#define QM_REG_QVOQIDX_45 0x1681a8 +#define QM_REG_QVOQIDX_46 0x1681ac +#define QM_REG_QVOQIDX_47 0x1681b0 +#define QM_REG_QVOQIDX_48 0x1681b4 +#define QM_REG_QVOQIDX_49 0x1681b8 +#define QM_REG_QVOQIDX_5 0x168108 +#define QM_REG_QVOQIDX_50 0x1681bc +#define QM_REG_QVOQIDX_51 0x1681c0 +#define QM_REG_QVOQIDX_52 0x1681c4 +#define QM_REG_QVOQIDX_53 0x1681c8 +#define QM_REG_QVOQIDX_54 0x1681cc +#define QM_REG_QVOQIDX_55 0x1681d0 +#define QM_REG_QVOQIDX_56 0x1681d4 +#define QM_REG_QVOQIDX_57 0x1681d8 +#define QM_REG_QVOQIDX_58 0x1681dc +#define QM_REG_QVOQIDX_59 0x1681e0 +#define QM_REG_QVOQIDX_6 0x16810c +#define QM_REG_QVOQIDX_60 0x1681e4 +#define QM_REG_QVOQIDX_61 0x1681e8 +#define QM_REG_QVOQIDX_62 0x1681ec +#define QM_REG_QVOQIDX_63 0x1681f0 +#define QM_REG_QVOQIDX_64 0x16e40c +#define QM_REG_QVOQIDX_65 0x16e410 +#define QM_REG_QVOQIDX_69 0x16e420 +#define QM_REG_QVOQIDX_7 0x168110 +#define QM_REG_QVOQIDX_70 0x16e424 +#define QM_REG_QVOQIDX_71 0x16e428 +#define QM_REG_QVOQIDX_72 0x16e42c +#define QM_REG_QVOQIDX_73 0x16e430 +#define QM_REG_QVOQIDX_74 0x16e434 +#define QM_REG_QVOQIDX_75 0x16e438 +#define QM_REG_QVOQIDX_76 0x16e43c +#define QM_REG_QVOQIDX_77 0x16e440 +#define QM_REG_QVOQIDX_78 0x16e444 +#define QM_REG_QVOQIDX_79 0x16e448 +#define QM_REG_QVOQIDX_8 0x168114 +#define QM_REG_QVOQIDX_80 0x16e44c +#define QM_REG_QVOQIDX_81 0x16e450 +#define QM_REG_QVOQIDX_85 0x16e460 +#define QM_REG_QVOQIDX_86 0x16e464 +#define QM_REG_QVOQIDX_87 0x16e468 +#define QM_REG_QVOQIDX_88 0x16e46c +#define QM_REG_QVOQIDX_89 0x16e470 +#define QM_REG_QVOQIDX_9 0x168118 +#define QM_REG_QVOQIDX_90 0x16e474 +#define QM_REG_QVOQIDX_91 0x16e478 +#define QM_REG_QVOQIDX_92 0x16e47c +#define QM_REG_QVOQIDX_93 0x16e480 +#define QM_REG_QVOQIDX_94 0x16e484 +#define QM_REG_QVOQIDX_95 0x16e488 +#define QM_REG_QVOQIDX_96 0x16e48c +#define QM_REG_QVOQIDX_97 0x16e490 +#define QM_REG_QVOQIDX_98 0x16e494 +#define QM_REG_QVOQIDX_99 0x16e498 +/* [RW 1] Initialization bit command */ +#define QM_REG_SOFT_RESET 0x168428 +/* [RW 8] The credit cost per every task in the QM. A value per each VOQ */ +#define QM_REG_TASKCRDCOST_0 0x16809c +#define QM_REG_TASKCRDCOST_1 0x1680a0 +#define QM_REG_TASKCRDCOST_2 0x1680a4 +#define QM_REG_TASKCRDCOST_4 0x1680ac +#define QM_REG_TASKCRDCOST_5 0x1680b0 +/* [R 6] Keep the fill level of the fifo from write client 3 */ +#define QM_REG_TQM_WRC_FIFOLVL 0x168010 +/* [R 6] Keep the fill level of the fifo from write client 2 */ +#define QM_REG_UQM_WRC_FIFOLVL 0x168008 +/* [RC 32] Credit update error register */ +#define QM_REG_VOQCRDERRREG 0x168408 +/* [R 16] The credit value for each VOQ */ +#define QM_REG_VOQCREDIT_0 0x1682d0 +#define QM_REG_VOQCREDIT_1 0x1682d4 +#define QM_REG_VOQCREDIT_4 0x1682e0 +/* [RW 16] The credit value that if above the QM is considered almost full */ +#define QM_REG_VOQCREDITAFULLTHR 0x168090 +/* [RW 16] The init and maximum credit for each VoQ */ +#define QM_REG_VOQINITCREDIT_0 0x168060 +#define QM_REG_VOQINITCREDIT_1 0x168064 +#define QM_REG_VOQINITCREDIT_2 0x168068 +#define QM_REG_VOQINITCREDIT_4 0x168070 +#define QM_REG_VOQINITCREDIT_5 0x168074 +/* [RW 1] The port of which VOQ belongs */ +#define QM_REG_VOQPORT_0 0x1682a0 +#define QM_REG_VOQPORT_1 0x1682a4 +#define QM_REG_VOQPORT_2 0x1682a8 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_0_LSB 0x168240 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_0_LSB_EXT_A 0x16e524 +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ +#define QM_REG_VOQQMASK_0_MSB 0x168244 +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_0_MSB_EXT_A 0x16e528 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_10_LSB 0x168290 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_10_LSB_EXT_A 0x16e574 +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ +#define QM_REG_VOQQMASK_10_MSB 0x168294 +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_10_MSB_EXT_A 0x16e578 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_11_LSB 0x168298 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_11_LSB_EXT_A 0x16e57c +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ +#define QM_REG_VOQQMASK_11_MSB 0x16829c +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_11_MSB_EXT_A 0x16e580 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_1_LSB 0x168248 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_1_LSB_EXT_A 0x16e52c +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ +#define QM_REG_VOQQMASK_1_MSB 0x16824c +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_1_MSB_EXT_A 0x16e530 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_2_LSB 0x168250 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_2_LSB_EXT_A 0x16e534 +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ +#define QM_REG_VOQQMASK_2_MSB 0x168254 +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_2_MSB_EXT_A 0x16e538 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_3_LSB 0x168258 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_3_LSB_EXT_A 0x16e53c +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_3_MSB_EXT_A 0x16e540 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_4_LSB 0x168260 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_4_LSB_EXT_A 0x16e544 +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ +#define QM_REG_VOQQMASK_4_MSB 0x168264 +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_4_MSB_EXT_A 0x16e548 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_5_LSB 0x168268 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_5_LSB_EXT_A 0x16e54c +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ +#define QM_REG_VOQQMASK_5_MSB 0x16826c +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_5_MSB_EXT_A 0x16e550 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_6_LSB 0x168270 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_6_LSB_EXT_A 0x16e554 +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ +#define QM_REG_VOQQMASK_6_MSB 0x168274 +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_6_MSB_EXT_A 0x16e558 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_7_LSB 0x168278 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_7_LSB_EXT_A 0x16e55c +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ +#define QM_REG_VOQQMASK_7_MSB 0x16827c +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_7_MSB_EXT_A 0x16e560 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_8_LSB 0x168280 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_8_LSB_EXT_A 0x16e564 +/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */ +#define QM_REG_VOQQMASK_8_MSB 0x168284 +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_8_MSB_EXT_A 0x16e568 +/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */ +#define QM_REG_VOQQMASK_9_LSB 0x168288 +/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */ +#define QM_REG_VOQQMASK_9_LSB_EXT_A 0x16e56c +/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */ +#define QM_REG_VOQQMASK_9_MSB_EXT_A 0x16e570 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_0 0x16880c +#define QM_REG_WRRWEIGHTS_1 0x168810 +#define QM_REG_WRRWEIGHTS_10 0x168814 +#define QM_REG_WRRWEIGHTS_11 0x168818 +#define QM_REG_WRRWEIGHTS_12 0x16881c +#define QM_REG_WRRWEIGHTS_13 0x168820 +#define QM_REG_WRRWEIGHTS_14 0x168824 +#define QM_REG_WRRWEIGHTS_15 0x168828 +#define QM_REG_WRRWEIGHTS_16 0x16e000 +#define QM_REG_WRRWEIGHTS_17 0x16e004 +#define QM_REG_WRRWEIGHTS_18 0x16e008 +#define QM_REG_WRRWEIGHTS_19 0x16e00c +#define QM_REG_WRRWEIGHTS_2 0x16882c +#define QM_REG_WRRWEIGHTS_20 0x16e010 +#define QM_REG_WRRWEIGHTS_21 0x16e014 +#define QM_REG_WRRWEIGHTS_22 0x16e018 +#define QM_REG_WRRWEIGHTS_23 0x16e01c +#define QM_REG_WRRWEIGHTS_24 0x16e020 +#define QM_REG_WRRWEIGHTS_25 0x16e024 +#define QM_REG_WRRWEIGHTS_26 0x16e028 +#define QM_REG_WRRWEIGHTS_27 0x16e02c +#define QM_REG_WRRWEIGHTS_28 0x16e030 +#define QM_REG_WRRWEIGHTS_29 0x16e034 +#define QM_REG_WRRWEIGHTS_3 0x168830 +#define QM_REG_WRRWEIGHTS_30 0x16e038 +#define QM_REG_WRRWEIGHTS_31 0x16e03c +#define QM_REG_WRRWEIGHTS_4 0x168834 +#define QM_REG_WRRWEIGHTS_5 0x168838 +#define QM_REG_WRRWEIGHTS_6 0x16883c +#define QM_REG_WRRWEIGHTS_7 0x168840 +#define QM_REG_WRRWEIGHTS_8 0x168844 +#define QM_REG_WRRWEIGHTS_9 0x168848 +/* [R 6] Keep the fill level of the fifo from write client 1 */ +#define QM_REG_XQM_WRC_FIFOLVL 0x168000 +/* [W 1] reset to parity interrupt */ +#define SEM_FAST_REG_PARITY_RST 0x18840 +#define SRC_REG_COUNTFREE0 0x40500 +/* [RW 1] If clr the searcher is compatible to E1 A0 - support only two + ports. If set the searcher support 8 functions. */ +#define SRC_REG_E1HMF_ENABLE 0x404cc +#define SRC_REG_FIRSTFREE0 0x40510 +#define SRC_REG_KEYRSS0_0 0x40408 +#define SRC_REG_KEYRSS0_7 0x40424 +#define SRC_REG_KEYRSS1_9 0x40454 +#define SRC_REG_KEYSEARCH_0 0x40458 +#define SRC_REG_KEYSEARCH_1 0x4045c +#define SRC_REG_KEYSEARCH_2 0x40460 +#define SRC_REG_KEYSEARCH_3 0x40464 +#define SRC_REG_KEYSEARCH_4 0x40468 +#define SRC_REG_KEYSEARCH_5 0x4046c +#define SRC_REG_KEYSEARCH_6 0x40470 +#define SRC_REG_KEYSEARCH_7 0x40474 +#define SRC_REG_KEYSEARCH_8 0x40478 +#define SRC_REG_KEYSEARCH_9 0x4047c +#define SRC_REG_LASTFREE0 0x40530 +#define SRC_REG_NUMBER_HASH_BITS0 0x40400 +/* [RW 1] Reset internal state machines. */ +#define SRC_REG_SOFT_RST 0x4049c +/* [R 3] Interrupt register #0 read */ +#define SRC_REG_SRC_INT_STS 0x404ac +/* [RW 3] Parity mask register #0 read/write */ +#define SRC_REG_SRC_PRTY_MASK 0x404c8 +/* [R 3] Parity register #0 read */ +#define SRC_REG_SRC_PRTY_STS 0x404bc +/* [RC 3] Parity register #0 read clear */ +#define SRC_REG_SRC_PRTY_STS_CLR 0x404c0 +/* [R 4] Used to read the value of the XX protection CAM occupancy counter. */ +#define TCM_REG_CAM_OCCUP 0x5017c +/* [RW 1] CDU AG read Interface enable. If 0 - the request input is + disregarded; valid output is deasserted; all other signals are treated as + usual; if 1 - normal activity. */ +#define TCM_REG_CDU_AG_RD_IFEN 0x50034 +/* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input + are disregarded; all other signals are treated as usual; if 1 - normal + activity. */ +#define TCM_REG_CDU_AG_WR_IFEN 0x50030 +/* [RW 1] CDU STORM read Interface enable. If 0 - the request input is + disregarded; valid output is deasserted; all other signals are treated as + usual; if 1 - normal activity. */ +#define TCM_REG_CDU_SM_RD_IFEN 0x5003c +/* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid + input is disregarded; all other signals are treated as usual; if 1 - + normal activity. */ +#define TCM_REG_CDU_SM_WR_IFEN 0x50038 +/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes + the initial credit value; read returns the current value of the credit + counter. Must be initialized to 1 at start-up. */ +#define TCM_REG_CFC_INIT_CRD 0x50204 +/* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_CP_WEIGHT 0x500c0 +/* [RW 1] Input csem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define TCM_REG_CSEM_IFEN 0x5002c +/* [RC 1] Message length mismatch (relative to last indication) at the In#9 + interface. */ +#define TCM_REG_CSEM_LENGTH_MIS 0x50174 +/* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_CSEM_WEIGHT 0x500bc +/* [RW 8] The Event ID in case of ErrorFlg is set in the input message. */ +#define TCM_REG_ERR_EVNT_ID 0x500a0 +/* [RW 28] The CM erroneous header for QM and Timers formatting. */ +#define TCM_REG_ERR_TCM_HDR 0x5009c +/* [RW 8] The Event ID for Timers expiration. */ +#define TCM_REG_EXPR_EVNT_ID 0x500a4 +/* [RW 8] FIC0 output initial credit. Max credit available - 255.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 64 at start-up. */ +#define TCM_REG_FIC0_INIT_CRD 0x5020c +/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 64 at start-up. */ +#define TCM_REG_FIC1_INIT_CRD 0x50210 +/* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1 + - strict priority defined by ~tcm_registers_gr_ag_pr.gr_ag_pr; + ~tcm_registers_gr_ld0_pr.gr_ld0_pr and + ~tcm_registers_gr_ld1_pr.gr_ld1_pr. */ +#define TCM_REG_GR_ARB_TYPE 0x50114 +/* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the + highest priority is 3. It is supposed that the Store channel is the + compliment of the other 3 groups. */ +#define TCM_REG_GR_LD0_PR 0x5011c +/* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the + highest priority is 3. It is supposed that the Store channel is the + compliment of the other 3 groups. */ +#define TCM_REG_GR_LD1_PR 0x50120 +/* [RW 4] The number of double REG-pairs; loaded from the STORM context and + sent to STORM; for a specific connection type. The double REG-pairs are + used to align to STORM context row size of 128 bits. The offset of these + data in the STORM context is always 0. Index _i stands for the connection + type (one of 16). */ +#define TCM_REG_N_SM_CTX_LD_0 0x50050 +#define TCM_REG_N_SM_CTX_LD_1 0x50054 +#define TCM_REG_N_SM_CTX_LD_2 0x50058 +#define TCM_REG_N_SM_CTX_LD_3 0x5005c +#define TCM_REG_N_SM_CTX_LD_4 0x50060 +#define TCM_REG_N_SM_CTX_LD_5 0x50064 +/* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define TCM_REG_PBF_IFEN 0x50024 +/* [RC 1] Message length mismatch (relative to last indication) at the In#7 + interface. */ +#define TCM_REG_PBF_LENGTH_MIS 0x5016c +/* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_PBF_WEIGHT 0x500b4 +#define TCM_REG_PHYS_QNUM0_0 0x500e0 +#define TCM_REG_PHYS_QNUM0_1 0x500e4 +#define TCM_REG_PHYS_QNUM1_0 0x500e8 +#define TCM_REG_PHYS_QNUM1_1 0x500ec +#define TCM_REG_PHYS_QNUM2_0 0x500f0 +#define TCM_REG_PHYS_QNUM2_1 0x500f4 +#define TCM_REG_PHYS_QNUM3_0 0x500f8 +#define TCM_REG_PHYS_QNUM3_1 0x500fc +/* [RW 1] Input prs Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define TCM_REG_PRS_IFEN 0x50020 +/* [RC 1] Message length mismatch (relative to last indication) at the In#6 + interface. */ +#define TCM_REG_PRS_LENGTH_MIS 0x50168 +/* [RW 3] The weight of the input prs in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_PRS_WEIGHT 0x500b0 +/* [RW 8] The Event ID for Timers formatting in case of stop done. */ +#define TCM_REG_STOP_EVNT_ID 0x500a8 +/* [RC 1] Message length mismatch (relative to last indication) at the STORM + interface. */ +#define TCM_REG_STORM_LENGTH_MIS 0x50160 +/* [RW 1] STORM - CM Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define TCM_REG_STORM_TCM_IFEN 0x50010 +/* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_STORM_WEIGHT 0x500ac +/* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define TCM_REG_TCM_CFC_IFEN 0x50040 +/* [RW 11] Interrupt mask register #0 read/write */ +#define TCM_REG_TCM_INT_MASK 0x501dc +/* [R 11] Interrupt register #0 read */ +#define TCM_REG_TCM_INT_STS 0x501d0 +/* [RW 27] Parity mask register #0 read/write */ +#define TCM_REG_TCM_PRTY_MASK 0x501ec +/* [R 27] Parity register #0 read */ +#define TCM_REG_TCM_PRTY_STS 0x501e0 +/* [RC 27] Parity register #0 read clear */ +#define TCM_REG_TCM_PRTY_STS_CLR 0x501e4 +/* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS + REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). + Is used to determine the number of the AG context REG-pairs written back; + when the input message Reg1WbFlg isn't set. */ +#define TCM_REG_TCM_REG0_SZ 0x500d8 +/* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define TCM_REG_TCM_STORM0_IFEN 0x50004 +/* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define TCM_REG_TCM_STORM1_IFEN 0x50008 +/* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define TCM_REG_TCM_TQM_IFEN 0x5000c +/* [RW 1] If set the Q index; received from the QM is inserted to event ID. */ +#define TCM_REG_TCM_TQM_USE_Q 0x500d4 +/* [RW 28] The CM header for Timers expiration command. */ +#define TCM_REG_TM_TCM_HDR 0x50098 +/* [RW 1] Timers - CM Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define TCM_REG_TM_TCM_IFEN 0x5001c +/* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_TM_WEIGHT 0x500d0 +/* [RW 6] QM output initial credit. Max credit available - 32.Write writes + the initial credit value; read returns the current value of the credit + counter. Must be initialized to 32 at start-up. */ +#define TCM_REG_TQM_INIT_CRD 0x5021c +/* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0 + stands for weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_TQM_P_WEIGHT 0x500c8 +/* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0 + stands for weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_TQM_S_WEIGHT 0x500cc +/* [RW 28] The CM header value for QM request (primary). */ +#define TCM_REG_TQM_TCM_HDR_P 0x50090 +/* [RW 28] The CM header value for QM request (secondary). */ +#define TCM_REG_TQM_TCM_HDR_S 0x50094 +/* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define TCM_REG_TQM_TCM_IFEN 0x50014 +/* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define TCM_REG_TSDM_IFEN 0x50018 +/* [RC 1] Message length mismatch (relative to last indication) at the SDM + interface. */ +#define TCM_REG_TSDM_LENGTH_MIS 0x50164 +/* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_TSDM_WEIGHT 0x500c4 +/* [RW 1] Input usem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define TCM_REG_USEM_IFEN 0x50028 +/* [RC 1] Message length mismatch (relative to last indication) at the In#8 + interface. */ +#define TCM_REG_USEM_LENGTH_MIS 0x50170 +/* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_USEM_WEIGHT 0x500b8 +/* [RW 21] Indirect access to the descriptor table of the XX protection + mechanism. The fields are: [5:0] - length of the message; 15:6] - message + pointer; 20:16] - next pointer. */ +#define TCM_REG_XX_DESCR_TABLE 0x50280 +#define TCM_REG_XX_DESCR_TABLE_SIZE 29 +/* [R 6] Use to read the value of XX protection Free counter. */ +#define TCM_REG_XX_FREE 0x50178 +/* [RW 6] Initial value for the credit counter; responsible for fulfilling + of the Input Stage XX protection buffer by the XX protection pending + messages. Max credit available - 127.Write writes the initial credit + value; read returns the current value of the credit counter. Must be + initialized to 19 at start-up. */ +#define TCM_REG_XX_INIT_CRD 0x50220 +/* [RW 6] Maximum link list size (messages locked) per connection in the XX + protection. */ +#define TCM_REG_XX_MAX_LL_SZ 0x50044 +/* [RW 6] The maximum number of pending messages; which may be stored in XX + protection. ~tcm_registers_xx_free.xx_free is read on read. */ +#define TCM_REG_XX_MSG_NUM 0x50224 +/* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */ +#define TCM_REG_XX_OVFL_EVNT_ID 0x50048 +/* [RW 16] Indirect access to the XX table of the XX protection mechanism. + The fields are:[4:0] - tail pointer; [10:5] - Link List size; 15:11] - + header pointer. */ +#define TCM_REG_XX_TABLE 0x50240 +/* [RW 4] Load value for cfc ac credit cnt. */ +#define TM_REG_CFC_AC_CRDCNT_VAL 0x164208 +/* [RW 4] Load value for cfc cld credit cnt. */ +#define TM_REG_CFC_CLD_CRDCNT_VAL 0x164210 +/* [RW 8] Client0 context region. */ +#define TM_REG_CL0_CONT_REGION 0x164030 +/* [RW 8] Client1 context region. */ +#define TM_REG_CL1_CONT_REGION 0x164034 +/* [RW 8] Client2 context region. */ +#define TM_REG_CL2_CONT_REGION 0x164038 +/* [RW 2] Client in High priority client number. */ +#define TM_REG_CLIN_PRIOR0_CLIENT 0x164024 +/* [RW 4] Load value for clout0 cred cnt. */ +#define TM_REG_CLOUT_CRDCNT0_VAL 0x164220 +/* [RW 4] Load value for clout1 cred cnt. */ +#define TM_REG_CLOUT_CRDCNT1_VAL 0x164228 +/* [RW 4] Load value for clout2 cred cnt. */ +#define TM_REG_CLOUT_CRDCNT2_VAL 0x164230 +/* [RW 1] Enable client0 input. */ +#define TM_REG_EN_CL0_INPUT 0x164008 +/* [RW 1] Enable client1 input. */ +#define TM_REG_EN_CL1_INPUT 0x16400c +/* [RW 1] Enable client2 input. */ +#define TM_REG_EN_CL2_INPUT 0x164010 +#define TM_REG_EN_LINEAR0_TIMER 0x164014 +/* [RW 1] Enable real time counter. */ +#define TM_REG_EN_REAL_TIME_CNT 0x1640d8 +/* [RW 1] Enable for Timers state machines. */ +#define TM_REG_EN_TIMERS 0x164000 +/* [RW 4] Load value for expiration credit cnt. CFC max number of + outstanding load requests for timers (expiration) context loading. */ +#define TM_REG_EXP_CRDCNT_VAL 0x164238 +/* [RW 32] Linear0 logic address. */ +#define TM_REG_LIN0_LOGIC_ADDR 0x164240 +/* [RW 18] Linear0 Max active cid (in banks of 32 entries). */ +#define TM_REG_LIN0_MAX_ACTIVE_CID 0x164048 +/* [ST 16] Linear0 Number of scans counter. */ +#define TM_REG_LIN0_NUM_SCANS 0x1640a0 +/* [WB 64] Linear0 phy address. */ +#define TM_REG_LIN0_PHY_ADDR 0x164270 +/* [RW 1] Linear0 physical address valid. */ +#define TM_REG_LIN0_PHY_ADDR_VALID 0x164248 +#define TM_REG_LIN0_SCAN_ON 0x1640d0 +/* [RW 24] Linear0 array scan timeout. */ +#define TM_REG_LIN0_SCAN_TIME 0x16403c +#define TM_REG_LIN0_VNIC_UC 0x164128 +/* [RW 32] Linear1 logic address. */ +#define TM_REG_LIN1_LOGIC_ADDR 0x164250 +/* [WB 64] Linear1 phy address. */ +#define TM_REG_LIN1_PHY_ADDR 0x164280 +/* [RW 1] Linear1 physical address valid. */ +#define TM_REG_LIN1_PHY_ADDR_VALID 0x164258 +/* [RW 6] Linear timer set_clear fifo threshold. */ +#define TM_REG_LIN_SETCLR_FIFO_ALFULL_THR 0x164070 +/* [RW 2] Load value for pci arbiter credit cnt. */ +#define TM_REG_PCIARB_CRDCNT_VAL 0x164260 +/* [RW 20] The amount of hardware cycles for each timer tick. */ +#define TM_REG_TIMER_TICK_SIZE 0x16401c +/* [RW 8] Timers Context region. */ +#define TM_REG_TM_CONTEXT_REGION 0x164044 +/* [RW 1] Interrupt mask register #0 read/write */ +#define TM_REG_TM_INT_MASK 0x1640fc +/* [R 1] Interrupt register #0 read */ +#define TM_REG_TM_INT_STS 0x1640f0 +/* [RW 7] Parity mask register #0 read/write */ +#define TM_REG_TM_PRTY_MASK 0x16410c +/* [RC 7] Parity register #0 read clear */ +#define TM_REG_TM_PRTY_STS_CLR 0x164104 +/* [RW 8] The event id for aggregated interrupt 0 */ +#define TSDM_REG_AGG_INT_EVENT_0 0x42038 +#define TSDM_REG_AGG_INT_EVENT_1 0x4203c +#define TSDM_REG_AGG_INT_EVENT_2 0x42040 +#define TSDM_REG_AGG_INT_EVENT_3 0x42044 +#define TSDM_REG_AGG_INT_EVENT_4 0x42048 +/* [RW 1] The T bit for aggregated interrupt 0 */ +#define TSDM_REG_AGG_INT_T_0 0x420b8 +#define TSDM_REG_AGG_INT_T_1 0x420bc +/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */ +#define TSDM_REG_CFC_RSP_START_ADDR 0x42008 +/* [RW 16] The maximum value of the completion counter #0 */ +#define TSDM_REG_CMP_COUNTER_MAX0 0x4201c +/* [RW 16] The maximum value of the completion counter #1 */ +#define TSDM_REG_CMP_COUNTER_MAX1 0x42020 +/* [RW 16] The maximum value of the completion counter #2 */ +#define TSDM_REG_CMP_COUNTER_MAX2 0x42024 +/* [RW 16] The maximum value of the completion counter #3 */ +#define TSDM_REG_CMP_COUNTER_MAX3 0x42028 +/* [RW 13] The start address in the internal RAM for the completion + counters. */ +#define TSDM_REG_CMP_COUNTER_START_ADDR 0x4200c +#define TSDM_REG_ENABLE_IN1 0x42238 +#define TSDM_REG_ENABLE_IN2 0x4223c +#define TSDM_REG_ENABLE_OUT1 0x42240 +#define TSDM_REG_ENABLE_OUT2 0x42244 +/* [RW 4] The initial number of messages that can be sent to the pxp control + interface without receiving any ACK. */ +#define TSDM_REG_INIT_CREDIT_PXP_CTRL 0x424bc +/* [ST 32] The number of ACK after placement messages received */ +#define TSDM_REG_NUM_OF_ACK_AFTER_PLACE 0x4227c +/* [ST 32] The number of packet end messages received from the parser */ +#define TSDM_REG_NUM_OF_PKT_END_MSG 0x42274 +/* [ST 32] The number of requests received from the pxp async if */ +#define TSDM_REG_NUM_OF_PXP_ASYNC_REQ 0x42278 +/* [ST 32] The number of commands received in queue 0 */ +#define TSDM_REG_NUM_OF_Q0_CMD 0x42248 +/* [ST 32] The number of commands received in queue 10 */ +#define TSDM_REG_NUM_OF_Q10_CMD 0x4226c +/* [ST 32] The number of commands received in queue 11 */ +#define TSDM_REG_NUM_OF_Q11_CMD 0x42270 +/* [ST 32] The number of commands received in queue 1 */ +#define TSDM_REG_NUM_OF_Q1_CMD 0x4224c +/* [ST 32] The number of commands received in queue 3 */ +#define TSDM_REG_NUM_OF_Q3_CMD 0x42250 +/* [ST 32] The number of commands received in queue 4 */ +#define TSDM_REG_NUM_OF_Q4_CMD 0x42254 +/* [ST 32] The number of commands received in queue 5 */ +#define TSDM_REG_NUM_OF_Q5_CMD 0x42258 +/* [ST 32] The number of commands received in queue 6 */ +#define TSDM_REG_NUM_OF_Q6_CMD 0x4225c +/* [ST 32] The number of commands received in queue 7 */ +#define TSDM_REG_NUM_OF_Q7_CMD 0x42260 +/* [ST 32] The number of commands received in queue 8 */ +#define TSDM_REG_NUM_OF_Q8_CMD 0x42264 +/* [ST 32] The number of commands received in queue 9 */ +#define TSDM_REG_NUM_OF_Q9_CMD 0x42268 +/* [RW 13] The start address in the internal RAM for the packet end message */ +#define TSDM_REG_PCK_END_MSG_START_ADDR 0x42014 +/* [RW 13] The start address in the internal RAM for queue counters */ +#define TSDM_REG_Q_COUNTER_START_ADDR 0x42010 +/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */ +#define TSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0x42548 +/* [R 1] parser fifo empty in sdm_sync block */ +#define TSDM_REG_SYNC_PARSER_EMPTY 0x42550 +/* [R 1] parser serial fifo empty in sdm_sync block */ +#define TSDM_REG_SYNC_SYNC_EMPTY 0x42558 +/* [RW 32] Tick for timer counter. Applicable only when + ~tsdm_registers_timer_tick_enable.timer_tick_enable =1 */ +#define TSDM_REG_TIMER_TICK 0x42000 +/* [RW 32] Interrupt mask register #0 read/write */ +#define TSDM_REG_TSDM_INT_MASK_0 0x4229c +#define TSDM_REG_TSDM_INT_MASK_1 0x422ac +/* [R 32] Interrupt register #0 read */ +#define TSDM_REG_TSDM_INT_STS_0 0x42290 +#define TSDM_REG_TSDM_INT_STS_1 0x422a0 +/* [RW 11] Parity mask register #0 read/write */ +#define TSDM_REG_TSDM_PRTY_MASK 0x422bc +/* [R 11] Parity register #0 read */ +#define TSDM_REG_TSDM_PRTY_STS 0x422b0 +/* [RC 11] Parity register #0 read clear */ +#define TSDM_REG_TSDM_PRTY_STS_CLR 0x422b4 +/* [RW 5] The number of time_slots in the arbitration cycle */ +#define TSEM_REG_ARB_CYCLE_SIZE 0x180034 +/* [RW 3] The source that is associated with arbitration element 0. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2 */ +#define TSEM_REG_ARB_ELEMENT0 0x180020 +/* [RW 3] The source that is associated with arbitration element 1. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~tsem_registers_arb_element0.arb_element0 */ +#define TSEM_REG_ARB_ELEMENT1 0x180024 +/* [RW 3] The source that is associated with arbitration element 2. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~tsem_registers_arb_element0.arb_element0 + and ~tsem_registers_arb_element1.arb_element1 */ +#define TSEM_REG_ARB_ELEMENT2 0x180028 +/* [RW 3] The source that is associated with arbitration element 3. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2.Could + not be equal to register ~tsem_registers_arb_element0.arb_element0 and + ~tsem_registers_arb_element1.arb_element1 and + ~tsem_registers_arb_element2.arb_element2 */ +#define TSEM_REG_ARB_ELEMENT3 0x18002c +/* [RW 3] The source that is associated with arbitration element 4. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~tsem_registers_arb_element0.arb_element0 + and ~tsem_registers_arb_element1.arb_element1 and + ~tsem_registers_arb_element2.arb_element2 and + ~tsem_registers_arb_element3.arb_element3 */ +#define TSEM_REG_ARB_ELEMENT4 0x180030 +#define TSEM_REG_ENABLE_IN 0x1800a4 +#define TSEM_REG_ENABLE_OUT 0x1800a8 +/* [RW 32] This address space contains all registers and memories that are + placed in SEM_FAST block. The SEM_FAST registers are described in + appendix B. In order to access the sem_fast registers the base address + ~fast_memory.fast_memory should be added to eachsem_fast register offset. */ +#define TSEM_REG_FAST_MEMORY 0x1a0000 +/* [RW 1] Disables input messages from FIC0 May be updated during run_time + by the microcode */ +#define TSEM_REG_FIC0_DISABLE 0x180224 +/* [RW 1] Disables input messages from FIC1 May be updated during run_time + by the microcode */ +#define TSEM_REG_FIC1_DISABLE 0x180234 +/* [RW 15] Interrupt table Read and write access to it is not possible in + the middle of the work */ +#define TSEM_REG_INT_TABLE 0x180400 +/* [ST 24] Statistics register. The number of messages that entered through + FIC0 */ +#define TSEM_REG_MSG_NUM_FIC0 0x180000 +/* [ST 24] Statistics register. The number of messages that entered through + FIC1 */ +#define TSEM_REG_MSG_NUM_FIC1 0x180004 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC0 */ +#define TSEM_REG_MSG_NUM_FOC0 0x180008 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC1 */ +#define TSEM_REG_MSG_NUM_FOC1 0x18000c +/* [ST 24] Statistics register. The number of messages that were sent to + FOC2 */ +#define TSEM_REG_MSG_NUM_FOC2 0x180010 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC3 */ +#define TSEM_REG_MSG_NUM_FOC3 0x180014 +/* [RW 1] Disables input messages from the passive buffer May be updated + during run_time by the microcode */ +#define TSEM_REG_PAS_DISABLE 0x18024c +/* [WB 128] Debug only. Passive buffer memory */ +#define TSEM_REG_PASSIVE_BUFFER 0x181000 +/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */ +#define TSEM_REG_PRAM 0x1c0000 +/* [R 8] Valid sleeping threads indication have bit per thread */ +#define TSEM_REG_SLEEP_THREADS_VALID 0x18026c +/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */ +#define TSEM_REG_SLOW_EXT_STORE_EMPTY 0x1802a0 +/* [RW 8] List of free threads . There is a bit per thread. */ +#define TSEM_REG_THREADS_LIST 0x1802e4 +/* [RC 32] Parity register #0 read clear */ +#define TSEM_REG_TSEM_PRTY_STS_CLR_0 0x180118 +#define TSEM_REG_TSEM_PRTY_STS_CLR_1 0x180128 +/* [RW 3] The arbitration scheme of time_slot 0 */ +#define TSEM_REG_TS_0_AS 0x180038 +/* [RW 3] The arbitration scheme of time_slot 10 */ +#define TSEM_REG_TS_10_AS 0x180060 +/* [RW 3] The arbitration scheme of time_slot 11 */ +#define TSEM_REG_TS_11_AS 0x180064 +/* [RW 3] The arbitration scheme of time_slot 12 */ +#define TSEM_REG_TS_12_AS 0x180068 +/* [RW 3] The arbitration scheme of time_slot 13 */ +#define TSEM_REG_TS_13_AS 0x18006c +/* [RW 3] The arbitration scheme of time_slot 14 */ +#define TSEM_REG_TS_14_AS 0x180070 +/* [RW 3] The arbitration scheme of time_slot 15 */ +#define TSEM_REG_TS_15_AS 0x180074 +/* [RW 3] The arbitration scheme of time_slot 16 */ +#define TSEM_REG_TS_16_AS 0x180078 +/* [RW 3] The arbitration scheme of time_slot 17 */ +#define TSEM_REG_TS_17_AS 0x18007c +/* [RW 3] The arbitration scheme of time_slot 18 */ +#define TSEM_REG_TS_18_AS 0x180080 +/* [RW 3] The arbitration scheme of time_slot 1 */ +#define TSEM_REG_TS_1_AS 0x18003c +/* [RW 3] The arbitration scheme of time_slot 2 */ +#define TSEM_REG_TS_2_AS 0x180040 +/* [RW 3] The arbitration scheme of time_slot 3 */ +#define TSEM_REG_TS_3_AS 0x180044 +/* [RW 3] The arbitration scheme of time_slot 4 */ +#define TSEM_REG_TS_4_AS 0x180048 +/* [RW 3] The arbitration scheme of time_slot 5 */ +#define TSEM_REG_TS_5_AS 0x18004c +/* [RW 3] The arbitration scheme of time_slot 6 */ +#define TSEM_REG_TS_6_AS 0x180050 +/* [RW 3] The arbitration scheme of time_slot 7 */ +#define TSEM_REG_TS_7_AS 0x180054 +/* [RW 3] The arbitration scheme of time_slot 8 */ +#define TSEM_REG_TS_8_AS 0x180058 +/* [RW 3] The arbitration scheme of time_slot 9 */ +#define TSEM_REG_TS_9_AS 0x18005c +/* [RW 32] Interrupt mask register #0 read/write */ +#define TSEM_REG_TSEM_INT_MASK_0 0x180100 +#define TSEM_REG_TSEM_INT_MASK_1 0x180110 +/* [R 32] Interrupt register #0 read */ +#define TSEM_REG_TSEM_INT_STS_0 0x1800f4 +#define TSEM_REG_TSEM_INT_STS_1 0x180104 +/* [RW 32] Parity mask register #0 read/write */ +#define TSEM_REG_TSEM_PRTY_MASK_0 0x180120 +#define TSEM_REG_TSEM_PRTY_MASK_1 0x180130 +/* [R 32] Parity register #0 read */ +#define TSEM_REG_TSEM_PRTY_STS_0 0x180114 +#define TSEM_REG_TSEM_PRTY_STS_1 0x180124 +/* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64 + * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */ +#define TSEM_REG_VFPF_ERR_NUM 0x180380 +/* [RW 32] Indirect access to AG context with 32-bits granularity. The bits + * [10:8] of the address should be the offset within the accessed LCID + * context; the bits [7:0] are the accessed LCID.Example: to write to REG10 + * LCID100. The RBC address should be 12'ha64. */ +#define UCM_REG_AG_CTX 0xe2000 +/* [R 5] Used to read the XX protection CAM occupancy counter. */ +#define UCM_REG_CAM_OCCUP 0xe0170 +/* [RW 1] CDU AG read Interface enable. If 0 - the request input is + disregarded; valid output is deasserted; all other signals are treated as + usual; if 1 - normal activity. */ +#define UCM_REG_CDU_AG_RD_IFEN 0xe0038 +/* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input + are disregarded; all other signals are treated as usual; if 1 - normal + activity. */ +#define UCM_REG_CDU_AG_WR_IFEN 0xe0034 +/* [RW 1] CDU STORM read Interface enable. If 0 - the request input is + disregarded; valid output is deasserted; all other signals are treated as + usual; if 1 - normal activity. */ +#define UCM_REG_CDU_SM_RD_IFEN 0xe0040 +/* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid + input is disregarded; all other signals are treated as usual; if 1 - + normal activity. */ +#define UCM_REG_CDU_SM_WR_IFEN 0xe003c +/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes + the initial credit value; read returns the current value of the credit + counter. Must be initialized to 1 at start-up. */ +#define UCM_REG_CFC_INIT_CRD 0xe0204 +/* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_CP_WEIGHT 0xe00c4 +/* [RW 1] Input csem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define UCM_REG_CSEM_IFEN 0xe0028 +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the csem interface is detected. */ +#define UCM_REG_CSEM_LENGTH_MIS 0xe0160 +/* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_CSEM_WEIGHT 0xe00b8 +/* [RW 1] Input dorq Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define UCM_REG_DORQ_IFEN 0xe0030 +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the dorq interface is detected. */ +#define UCM_REG_DORQ_LENGTH_MIS 0xe0168 +/* [RW 3] The weight of the input dorq in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_DORQ_WEIGHT 0xe00c0 +/* [RW 8] The Event ID in case ErrorFlg input message bit is set. */ +#define UCM_REG_ERR_EVNT_ID 0xe00a4 +/* [RW 28] The CM erroneous header for QM and Timers formatting. */ +#define UCM_REG_ERR_UCM_HDR 0xe00a0 +/* [RW 8] The Event ID for Timers expiration. */ +#define UCM_REG_EXPR_EVNT_ID 0xe00a8 +/* [RW 8] FIC0 output initial credit. Max credit available - 255.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 64 at start-up. */ +#define UCM_REG_FIC0_INIT_CRD 0xe020c +/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 64 at start-up. */ +#define UCM_REG_FIC1_INIT_CRD 0xe0210 +/* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1 + - strict priority defined by ~ucm_registers_gr_ag_pr.gr_ag_pr; + ~ucm_registers_gr_ld0_pr.gr_ld0_pr and + ~ucm_registers_gr_ld1_pr.gr_ld1_pr. */ +#define UCM_REG_GR_ARB_TYPE 0xe0144 +/* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the + highest priority is 3. It is supposed that the Store channel group is + compliment to the others. */ +#define UCM_REG_GR_LD0_PR 0xe014c +/* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the + highest priority is 3. It is supposed that the Store channel group is + compliment to the others. */ +#define UCM_REG_GR_LD1_PR 0xe0150 +/* [RW 2] The queue index for invalidate counter flag decision. */ +#define UCM_REG_INV_CFLG_Q 0xe00e4 +/* [RW 5] The number of double REG-pairs; loaded from the STORM context and + sent to STORM; for a specific connection type. the double REG-pairs are + used in order to align to STORM context row size of 128 bits. The offset + of these data in the STORM context is always 0. Index _i stands for the + connection type (one of 16). */ +#define UCM_REG_N_SM_CTX_LD_0 0xe0054 +#define UCM_REG_N_SM_CTX_LD_1 0xe0058 +#define UCM_REG_N_SM_CTX_LD_2 0xe005c +#define UCM_REG_N_SM_CTX_LD_3 0xe0060 +#define UCM_REG_N_SM_CTX_LD_4 0xe0064 +#define UCM_REG_N_SM_CTX_LD_5 0xe0068 +#define UCM_REG_PHYS_QNUM0_0 0xe0110 +#define UCM_REG_PHYS_QNUM0_1 0xe0114 +#define UCM_REG_PHYS_QNUM1_0 0xe0118 +#define UCM_REG_PHYS_QNUM1_1 0xe011c +#define UCM_REG_PHYS_QNUM2_0 0xe0120 +#define UCM_REG_PHYS_QNUM2_1 0xe0124 +#define UCM_REG_PHYS_QNUM3_0 0xe0128 +#define UCM_REG_PHYS_QNUM3_1 0xe012c +/* [RW 8] The Event ID for Timers formatting in case of stop done. */ +#define UCM_REG_STOP_EVNT_ID 0xe00ac +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the STORM interface is detected. */ +#define UCM_REG_STORM_LENGTH_MIS 0xe0154 +/* [RW 1] STORM - CM Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define UCM_REG_STORM_UCM_IFEN 0xe0010 +/* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_STORM_WEIGHT 0xe00b0 +/* [RW 4] Timers output initial credit. Max credit available - 15.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 4 at start-up. */ +#define UCM_REG_TM_INIT_CRD 0xe021c +/* [RW 28] The CM header for Timers expiration command. */ +#define UCM_REG_TM_UCM_HDR 0xe009c +/* [RW 1] Timers - CM Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define UCM_REG_TM_UCM_IFEN 0xe001c +/* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_TM_WEIGHT 0xe00d4 +/* [RW 1] Input tsem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define UCM_REG_TSEM_IFEN 0xe0024 +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the tsem interface is detected. */ +#define UCM_REG_TSEM_LENGTH_MIS 0xe015c +/* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_TSEM_WEIGHT 0xe00b4 +/* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define UCM_REG_UCM_CFC_IFEN 0xe0044 +/* [RW 11] Interrupt mask register #0 read/write */ +#define UCM_REG_UCM_INT_MASK 0xe01d4 +/* [R 11] Interrupt register #0 read */ +#define UCM_REG_UCM_INT_STS 0xe01c8 +/* [RW 27] Parity mask register #0 read/write */ +#define UCM_REG_UCM_PRTY_MASK 0xe01e4 +/* [R 27] Parity register #0 read */ +#define UCM_REG_UCM_PRTY_STS 0xe01d8 +/* [RC 27] Parity register #0 read clear */ +#define UCM_REG_UCM_PRTY_STS_CLR 0xe01dc +/* [RW 2] The size of AG context region 0 in REG-pairs. Designates the MS + REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). + Is used to determine the number of the AG context REG-pairs written back; + when the Reg1WbFlg isn't set. */ +#define UCM_REG_UCM_REG0_SZ 0xe00dc +/* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define UCM_REG_UCM_STORM0_IFEN 0xe0004 +/* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define UCM_REG_UCM_STORM1_IFEN 0xe0008 +/* [RW 1] CM - Timers Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define UCM_REG_UCM_TM_IFEN 0xe0020 +/* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define UCM_REG_UCM_UQM_IFEN 0xe000c +/* [RW 1] If set the Q index; received from the QM is inserted to event ID. */ +#define UCM_REG_UCM_UQM_USE_Q 0xe00d8 +/* [RW 6] QM output initial credit. Max credit available - 32.Write writes + the initial credit value; read returns the current value of the credit + counter. Must be initialized to 32 at start-up. */ +#define UCM_REG_UQM_INIT_CRD 0xe0220 +/* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0 + stands for weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_UQM_P_WEIGHT 0xe00cc +/* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0 + stands for weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_UQM_S_WEIGHT 0xe00d0 +/* [RW 28] The CM header value for QM request (primary). */ +#define UCM_REG_UQM_UCM_HDR_P 0xe0094 +/* [RW 28] The CM header value for QM request (secondary). */ +#define UCM_REG_UQM_UCM_HDR_S 0xe0098 +/* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define UCM_REG_UQM_UCM_IFEN 0xe0014 +/* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define UCM_REG_USDM_IFEN 0xe0018 +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the SDM interface is detected. */ +#define UCM_REG_USDM_LENGTH_MIS 0xe0158 +/* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_USDM_WEIGHT 0xe00c8 +/* [RW 1] Input xsem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define UCM_REG_XSEM_IFEN 0xe002c +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the xsem interface isdetected. */ +#define UCM_REG_XSEM_LENGTH_MIS 0xe0164 +/* [RW 3] The weight of the input xsem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_XSEM_WEIGHT 0xe00bc +/* [RW 20] Indirect access to the descriptor table of the XX protection + mechanism. The fields are:[5:0] - message length; 14:6] - message + pointer; 19:15] - next pointer. */ +#define UCM_REG_XX_DESCR_TABLE 0xe0280 +#define UCM_REG_XX_DESCR_TABLE_SIZE 27 +/* [R 6] Use to read the XX protection Free counter. */ +#define UCM_REG_XX_FREE 0xe016c +/* [RW 6] Initial value for the credit counter; responsible for fulfilling + of the Input Stage XX protection buffer by the XX protection pending + messages. Write writes the initial credit value; read returns the current + value of the credit counter. Must be initialized to 12 at start-up. */ +#define UCM_REG_XX_INIT_CRD 0xe0224 +/* [RW 6] The maximum number of pending messages; which may be stored in XX + protection. ~ucm_registers_xx_free.xx_free read on read. */ +#define UCM_REG_XX_MSG_NUM 0xe0228 +/* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */ +#define UCM_REG_XX_OVFL_EVNT_ID 0xe004c +/* [RW 16] Indirect access to the XX table of the XX protection mechanism. + The fields are: [4:0] - tail pointer; 10:5] - Link List size; 15:11] - + header pointer. */ +#define UCM_REG_XX_TABLE 0xe0300 +#define UMAC_COMMAND_CONFIG_REG_IGNORE_TX_PAUSE (0x1<<28) +#define UMAC_COMMAND_CONFIG_REG_LOOP_ENA (0x1<<15) +#define UMAC_COMMAND_CONFIG_REG_NO_LGTH_CHECK (0x1<<24) +#define UMAC_COMMAND_CONFIG_REG_PAD_EN (0x1<<5) +#define UMAC_COMMAND_CONFIG_REG_PAUSE_IGNORE (0x1<<8) +#define UMAC_COMMAND_CONFIG_REG_PROMIS_EN (0x1<<4) +#define UMAC_COMMAND_CONFIG_REG_RX_ENA (0x1<<1) +#define UMAC_COMMAND_CONFIG_REG_SW_RESET (0x1<<13) +#define UMAC_COMMAND_CONFIG_REG_TX_ENA (0x1<<0) +#define UMAC_REG_COMMAND_CONFIG 0x8 +/* [RW 32] Register Bit 0 refers to Bit 16 of the MAC address; Bit 1 refers + * to bit 17 of the MAC address etc. */ +#define UMAC_REG_MAC_ADDR0 0xc +/* [RW 16] Register Bit 0 refers to Bit 0 of the MAC address; Register Bit 1 + * refers to Bit 1 of the MAC address etc. Bits 16 to 31 are reserved. */ +#define UMAC_REG_MAC_ADDR1 0x10 +/* [RW 14] Defines a 14-Bit maximum frame length used by the MAC receive + * logic to check frames. */ +#define UMAC_REG_MAXFR 0x14 +/* [RW 8] The event id for aggregated interrupt 0 */ +#define USDM_REG_AGG_INT_EVENT_0 0xc4038 +#define USDM_REG_AGG_INT_EVENT_1 0xc403c +#define USDM_REG_AGG_INT_EVENT_2 0xc4040 +#define USDM_REG_AGG_INT_EVENT_4 0xc4048 +#define USDM_REG_AGG_INT_EVENT_5 0xc404c +#define USDM_REG_AGG_INT_EVENT_6 0xc4050 +/* [RW 1] For each aggregated interrupt index whether the mode is normal (0) + or auto-mask-mode (1) */ +#define USDM_REG_AGG_INT_MODE_0 0xc41b8 +#define USDM_REG_AGG_INT_MODE_1 0xc41bc +#define USDM_REG_AGG_INT_MODE_4 0xc41c8 +#define USDM_REG_AGG_INT_MODE_5 0xc41cc +#define USDM_REG_AGG_INT_MODE_6 0xc41d0 +/* [RW 1] The T bit for aggregated interrupt 5 */ +#define USDM_REG_AGG_INT_T_5 0xc40cc +#define USDM_REG_AGG_INT_T_6 0xc40d0 +/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */ +#define USDM_REG_CFC_RSP_START_ADDR 0xc4008 +/* [RW 16] The maximum value of the completion counter #0 */ +#define USDM_REG_CMP_COUNTER_MAX0 0xc401c +/* [RW 16] The maximum value of the completion counter #1 */ +#define USDM_REG_CMP_COUNTER_MAX1 0xc4020 +/* [RW 16] The maximum value of the completion counter #2 */ +#define USDM_REG_CMP_COUNTER_MAX2 0xc4024 +/* [RW 16] The maximum value of the completion counter #3 */ +#define USDM_REG_CMP_COUNTER_MAX3 0xc4028 +/* [RW 13] The start address in the internal RAM for the completion + counters. */ +#define USDM_REG_CMP_COUNTER_START_ADDR 0xc400c +#define USDM_REG_ENABLE_IN1 0xc4238 +#define USDM_REG_ENABLE_IN2 0xc423c +#define USDM_REG_ENABLE_OUT1 0xc4240 +#define USDM_REG_ENABLE_OUT2 0xc4244 +/* [RW 4] The initial number of messages that can be sent to the pxp control + interface without receiving any ACK. */ +#define USDM_REG_INIT_CREDIT_PXP_CTRL 0xc44c0 +/* [ST 32] The number of ACK after placement messages received */ +#define USDM_REG_NUM_OF_ACK_AFTER_PLACE 0xc4280 +/* [ST 32] The number of packet end messages received from the parser */ +#define USDM_REG_NUM_OF_PKT_END_MSG 0xc4278 +/* [ST 32] The number of requests received from the pxp async if */ +#define USDM_REG_NUM_OF_PXP_ASYNC_REQ 0xc427c +/* [ST 32] The number of commands received in queue 0 */ +#define USDM_REG_NUM_OF_Q0_CMD 0xc4248 +/* [ST 32] The number of commands received in queue 10 */ +#define USDM_REG_NUM_OF_Q10_CMD 0xc4270 +/* [ST 32] The number of commands received in queue 11 */ +#define USDM_REG_NUM_OF_Q11_CMD 0xc4274 +/* [ST 32] The number of commands received in queue 1 */ +#define USDM_REG_NUM_OF_Q1_CMD 0xc424c +/* [ST 32] The number of commands received in queue 2 */ +#define USDM_REG_NUM_OF_Q2_CMD 0xc4250 +/* [ST 32] The number of commands received in queue 3 */ +#define USDM_REG_NUM_OF_Q3_CMD 0xc4254 +/* [ST 32] The number of commands received in queue 4 */ +#define USDM_REG_NUM_OF_Q4_CMD 0xc4258 +/* [ST 32] The number of commands received in queue 5 */ +#define USDM_REG_NUM_OF_Q5_CMD 0xc425c +/* [ST 32] The number of commands received in queue 6 */ +#define USDM_REG_NUM_OF_Q6_CMD 0xc4260 +/* [ST 32] The number of commands received in queue 7 */ +#define USDM_REG_NUM_OF_Q7_CMD 0xc4264 +/* [ST 32] The number of commands received in queue 8 */ +#define USDM_REG_NUM_OF_Q8_CMD 0xc4268 +/* [ST 32] The number of commands received in queue 9 */ +#define USDM_REG_NUM_OF_Q9_CMD 0xc426c +/* [RW 13] The start address in the internal RAM for the packet end message */ +#define USDM_REG_PCK_END_MSG_START_ADDR 0xc4014 +/* [RW 13] The start address in the internal RAM for queue counters */ +#define USDM_REG_Q_COUNTER_START_ADDR 0xc4010 +/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */ +#define USDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0xc4550 +/* [R 1] parser fifo empty in sdm_sync block */ +#define USDM_REG_SYNC_PARSER_EMPTY 0xc4558 +/* [R 1] parser serial fifo empty in sdm_sync block */ +#define USDM_REG_SYNC_SYNC_EMPTY 0xc4560 +/* [RW 32] Tick for timer counter. Applicable only when + ~usdm_registers_timer_tick_enable.timer_tick_enable =1 */ +#define USDM_REG_TIMER_TICK 0xc4000 +/* [RW 32] Interrupt mask register #0 read/write */ +#define USDM_REG_USDM_INT_MASK_0 0xc42a0 +#define USDM_REG_USDM_INT_MASK_1 0xc42b0 +/* [R 32] Interrupt register #0 read */ +#define USDM_REG_USDM_INT_STS_0 0xc4294 +#define USDM_REG_USDM_INT_STS_1 0xc42a4 +/* [RW 11] Parity mask register #0 read/write */ +#define USDM_REG_USDM_PRTY_MASK 0xc42c0 +/* [R 11] Parity register #0 read */ +#define USDM_REG_USDM_PRTY_STS 0xc42b4 +/* [RC 11] Parity register #0 read clear */ +#define USDM_REG_USDM_PRTY_STS_CLR 0xc42b8 +/* [RW 5] The number of time_slots in the arbitration cycle */ +#define USEM_REG_ARB_CYCLE_SIZE 0x300034 +/* [RW 3] The source that is associated with arbitration element 0. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2 */ +#define USEM_REG_ARB_ELEMENT0 0x300020 +/* [RW 3] The source that is associated with arbitration element 1. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~usem_registers_arb_element0.arb_element0 */ +#define USEM_REG_ARB_ELEMENT1 0x300024 +/* [RW 3] The source that is associated with arbitration element 2. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~usem_registers_arb_element0.arb_element0 + and ~usem_registers_arb_element1.arb_element1 */ +#define USEM_REG_ARB_ELEMENT2 0x300028 +/* [RW 3] The source that is associated with arbitration element 3. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2.Could + not be equal to register ~usem_registers_arb_element0.arb_element0 and + ~usem_registers_arb_element1.arb_element1 and + ~usem_registers_arb_element2.arb_element2 */ +#define USEM_REG_ARB_ELEMENT3 0x30002c +/* [RW 3] The source that is associated with arbitration element 4. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~usem_registers_arb_element0.arb_element0 + and ~usem_registers_arb_element1.arb_element1 and + ~usem_registers_arb_element2.arb_element2 and + ~usem_registers_arb_element3.arb_element3 */ +#define USEM_REG_ARB_ELEMENT4 0x300030 +#define USEM_REG_ENABLE_IN 0x3000a4 +#define USEM_REG_ENABLE_OUT 0x3000a8 +/* [RW 32] This address space contains all registers and memories that are + placed in SEM_FAST block. The SEM_FAST registers are described in + appendix B. In order to access the sem_fast registers the base address + ~fast_memory.fast_memory should be added to eachsem_fast register offset. */ +#define USEM_REG_FAST_MEMORY 0x320000 +/* [RW 1] Disables input messages from FIC0 May be updated during run_time + by the microcode */ +#define USEM_REG_FIC0_DISABLE 0x300224 +/* [RW 1] Disables input messages from FIC1 May be updated during run_time + by the microcode */ +#define USEM_REG_FIC1_DISABLE 0x300234 +/* [RW 15] Interrupt table Read and write access to it is not possible in + the middle of the work */ +#define USEM_REG_INT_TABLE 0x300400 +/* [ST 24] Statistics register. The number of messages that entered through + FIC0 */ +#define USEM_REG_MSG_NUM_FIC0 0x300000 +/* [ST 24] Statistics register. The number of messages that entered through + FIC1 */ +#define USEM_REG_MSG_NUM_FIC1 0x300004 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC0 */ +#define USEM_REG_MSG_NUM_FOC0 0x300008 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC1 */ +#define USEM_REG_MSG_NUM_FOC1 0x30000c +/* [ST 24] Statistics register. The number of messages that were sent to + FOC2 */ +#define USEM_REG_MSG_NUM_FOC2 0x300010 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC3 */ +#define USEM_REG_MSG_NUM_FOC3 0x300014 +/* [RW 1] Disables input messages from the passive buffer May be updated + during run_time by the microcode */ +#define USEM_REG_PAS_DISABLE 0x30024c +/* [WB 128] Debug only. Passive buffer memory */ +#define USEM_REG_PASSIVE_BUFFER 0x302000 +/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */ +#define USEM_REG_PRAM 0x340000 +/* [R 16] Valid sleeping threads indication have bit per thread */ +#define USEM_REG_SLEEP_THREADS_VALID 0x30026c +/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */ +#define USEM_REG_SLOW_EXT_STORE_EMPTY 0x3002a0 +/* [RW 16] List of free threads . There is a bit per thread. */ +#define USEM_REG_THREADS_LIST 0x3002e4 +/* [RW 3] The arbitration scheme of time_slot 0 */ +#define USEM_REG_TS_0_AS 0x300038 +/* [RW 3] The arbitration scheme of time_slot 10 */ +#define USEM_REG_TS_10_AS 0x300060 +/* [RW 3] The arbitration scheme of time_slot 11 */ +#define USEM_REG_TS_11_AS 0x300064 +/* [RW 3] The arbitration scheme of time_slot 12 */ +#define USEM_REG_TS_12_AS 0x300068 +/* [RW 3] The arbitration scheme of time_slot 13 */ +#define USEM_REG_TS_13_AS 0x30006c +/* [RW 3] The arbitration scheme of time_slot 14 */ +#define USEM_REG_TS_14_AS 0x300070 +/* [RW 3] The arbitration scheme of time_slot 15 */ +#define USEM_REG_TS_15_AS 0x300074 +/* [RW 3] The arbitration scheme of time_slot 16 */ +#define USEM_REG_TS_16_AS 0x300078 +/* [RW 3] The arbitration scheme of time_slot 17 */ +#define USEM_REG_TS_17_AS 0x30007c +/* [RW 3] The arbitration scheme of time_slot 18 */ +#define USEM_REG_TS_18_AS 0x300080 +/* [RW 3] The arbitration scheme of time_slot 1 */ +#define USEM_REG_TS_1_AS 0x30003c +/* [RW 3] The arbitration scheme of time_slot 2 */ +#define USEM_REG_TS_2_AS 0x300040 +/* [RW 3] The arbitration scheme of time_slot 3 */ +#define USEM_REG_TS_3_AS 0x300044 +/* [RW 3] The arbitration scheme of time_slot 4 */ +#define USEM_REG_TS_4_AS 0x300048 +/* [RW 3] The arbitration scheme of time_slot 5 */ +#define USEM_REG_TS_5_AS 0x30004c +/* [RW 3] The arbitration scheme of time_slot 6 */ +#define USEM_REG_TS_6_AS 0x300050 +/* [RW 3] The arbitration scheme of time_slot 7 */ +#define USEM_REG_TS_7_AS 0x300054 +/* [RW 3] The arbitration scheme of time_slot 8 */ +#define USEM_REG_TS_8_AS 0x300058 +/* [RW 3] The arbitration scheme of time_slot 9 */ +#define USEM_REG_TS_9_AS 0x30005c +/* [RW 32] Interrupt mask register #0 read/write */ +#define USEM_REG_USEM_INT_MASK_0 0x300110 +#define USEM_REG_USEM_INT_MASK_1 0x300120 +/* [R 32] Interrupt register #0 read */ +#define USEM_REG_USEM_INT_STS_0 0x300104 +#define USEM_REG_USEM_INT_STS_1 0x300114 +/* [RW 32] Parity mask register #0 read/write */ +#define USEM_REG_USEM_PRTY_MASK_0 0x300130 +#define USEM_REG_USEM_PRTY_MASK_1 0x300140 +/* [R 32] Parity register #0 read */ +#define USEM_REG_USEM_PRTY_STS_0 0x300124 +#define USEM_REG_USEM_PRTY_STS_1 0x300134 +/* [RC 32] Parity register #0 read clear */ +#define USEM_REG_USEM_PRTY_STS_CLR_0 0x300128 +#define USEM_REG_USEM_PRTY_STS_CLR_1 0x300138 +/* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64 + * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */ +#define USEM_REG_VFPF_ERR_NUM 0x300380 +#define VFC_MEMORIES_RST_REG_CAM_RST (0x1<<0) +#define VFC_MEMORIES_RST_REG_RAM_RST (0x1<<1) +#define VFC_REG_MEMORIES_RST 0x1943c +/* [RW 32] Indirect access to AG context with 32-bits granularity. The bits + * [12:8] of the address should be the offset within the accessed LCID + * context; the bits [7:0] are the accessed LCID.Example: to write to REG10 + * LCID100. The RBC address should be 13'ha64. */ +#define XCM_REG_AG_CTX 0x28000 +/* [RW 2] The queue index for registration on Aux1 counter flag. */ +#define XCM_REG_AUX1_Q 0x20134 +/* [RW 2] Per each decision rule the queue index to register to. */ +#define XCM_REG_AUX_CNT_FLG_Q_19 0x201b0 +/* [R 5] Used to read the XX protection CAM occupancy counter. */ +#define XCM_REG_CAM_OCCUP 0x20244 +/* [RW 1] CDU AG read Interface enable. If 0 - the request input is + disregarded; valid output is deasserted; all other signals are treated as + usual; if 1 - normal activity. */ +#define XCM_REG_CDU_AG_RD_IFEN 0x20044 +/* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input + are disregarded; all other signals are treated as usual; if 1 - normal + activity. */ +#define XCM_REG_CDU_AG_WR_IFEN 0x20040 +/* [RW 1] CDU STORM read Interface enable. If 0 - the request input is + disregarded; valid output is deasserted; all other signals are treated as + usual; if 1 - normal activity. */ +#define XCM_REG_CDU_SM_RD_IFEN 0x2004c +/* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid + input is disregarded; all other signals are treated as usual; if 1 - + normal activity. */ +#define XCM_REG_CDU_SM_WR_IFEN 0x20048 +/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes + the initial credit value; read returns the current value of the credit + counter. Must be initialized to 1 at start-up. */ +#define XCM_REG_CFC_INIT_CRD 0x20404 +/* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_CP_WEIGHT 0x200dc +/* [RW 1] Input csem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_CSEM_IFEN 0x20028 +/* [RC 1] Set at message length mismatch (relative to last indication) at + the csem interface. */ +#define XCM_REG_CSEM_LENGTH_MIS 0x20228 +/* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_CSEM_WEIGHT 0x200c4 +/* [RW 1] Input dorq Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_DORQ_IFEN 0x20030 +/* [RC 1] Set at message length mismatch (relative to last indication) at + the dorq interface. */ +#define XCM_REG_DORQ_LENGTH_MIS 0x20230 +/* [RW 3] The weight of the input dorq in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_DORQ_WEIGHT 0x200cc +/* [RW 8] The Event ID in case the ErrorFlg input message bit is set. */ +#define XCM_REG_ERR_EVNT_ID 0x200b0 +/* [RW 28] The CM erroneous header for QM and Timers formatting. */ +#define XCM_REG_ERR_XCM_HDR 0x200ac +/* [RW 8] The Event ID for Timers expiration. */ +#define XCM_REG_EXPR_EVNT_ID 0x200b4 +/* [RW 8] FIC0 output initial credit. Max credit available - 255.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 64 at start-up. */ +#define XCM_REG_FIC0_INIT_CRD 0x2040c +/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 64 at start-up. */ +#define XCM_REG_FIC1_INIT_CRD 0x20410 +#define XCM_REG_GLB_DEL_ACK_MAX_CNT_0 0x20118 +#define XCM_REG_GLB_DEL_ACK_MAX_CNT_1 0x2011c +#define XCM_REG_GLB_DEL_ACK_TMR_VAL_0 0x20108 +#define XCM_REG_GLB_DEL_ACK_TMR_VAL_1 0x2010c +/* [RW 1] Arbitratiojn between Input Arbiter groups: 0 - fair Round-Robin; 1 + - strict priority defined by ~xcm_registers_gr_ag_pr.gr_ag_pr; + ~xcm_registers_gr_ld0_pr.gr_ld0_pr and + ~xcm_registers_gr_ld1_pr.gr_ld1_pr. */ +#define XCM_REG_GR_ARB_TYPE 0x2020c +/* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the + highest priority is 3. It is supposed that the Channel group is the + compliment of the other 3 groups. */ +#define XCM_REG_GR_LD0_PR 0x20214 +/* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the + highest priority is 3. It is supposed that the Channel group is the + compliment of the other 3 groups. */ +#define XCM_REG_GR_LD1_PR 0x20218 +/* [RW 1] Input nig0 Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_NIG0_IFEN 0x20038 +/* [RC 1] Set at message length mismatch (relative to last indication) at + the nig0 interface. */ +#define XCM_REG_NIG0_LENGTH_MIS 0x20238 +/* [RW 3] The weight of the input nig0 in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_NIG0_WEIGHT 0x200d4 +/* [RW 1] Input nig1 Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_NIG1_IFEN 0x2003c +/* [RC 1] Set at message length mismatch (relative to last indication) at + the nig1 interface. */ +#define XCM_REG_NIG1_LENGTH_MIS 0x2023c +/* [RW 5] The number of double REG-pairs; loaded from the STORM context and + sent to STORM; for a specific connection type. The double REG-pairs are + used in order to align to STORM context row size of 128 bits. The offset + of these data in the STORM context is always 0. Index _i stands for the + connection type (one of 16). */ +#define XCM_REG_N_SM_CTX_LD_0 0x20060 +#define XCM_REG_N_SM_CTX_LD_1 0x20064 +#define XCM_REG_N_SM_CTX_LD_2 0x20068 +#define XCM_REG_N_SM_CTX_LD_3 0x2006c +#define XCM_REG_N_SM_CTX_LD_4 0x20070 +#define XCM_REG_N_SM_CTX_LD_5 0x20074 +/* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define XCM_REG_PBF_IFEN 0x20034 +/* [RC 1] Set at message length mismatch (relative to last indication) at + the pbf interface. */ +#define XCM_REG_PBF_LENGTH_MIS 0x20234 +/* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_PBF_WEIGHT 0x200d0 +#define XCM_REG_PHYS_QNUM3_0 0x20100 +#define XCM_REG_PHYS_QNUM3_1 0x20104 +/* [RW 8] The Event ID for Timers formatting in case of stop done. */ +#define XCM_REG_STOP_EVNT_ID 0x200b8 +/* [RC 1] Set at message length mismatch (relative to last indication) at + the STORM interface. */ +#define XCM_REG_STORM_LENGTH_MIS 0x2021c +/* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_STORM_WEIGHT 0x200bc +/* [RW 1] STORM - CM Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_STORM_XCM_IFEN 0x20010 +/* [RW 4] Timers output initial credit. Max credit available - 15.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 4 at start-up. */ +#define XCM_REG_TM_INIT_CRD 0x2041c +/* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_TM_WEIGHT 0x200ec +/* [RW 28] The CM header for Timers expiration command. */ +#define XCM_REG_TM_XCM_HDR 0x200a8 +/* [RW 1] Timers - CM Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_TM_XCM_IFEN 0x2001c +/* [RW 1] Input tsem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_TSEM_IFEN 0x20024 +/* [RC 1] Set at message length mismatch (relative to last indication) at + the tsem interface. */ +#define XCM_REG_TSEM_LENGTH_MIS 0x20224 +/* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_TSEM_WEIGHT 0x200c0 +/* [RW 2] The queue index for registration on UNA greater NXT decision rule. */ +#define XCM_REG_UNA_GT_NXT_Q 0x20120 +/* [RW 1] Input usem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_USEM_IFEN 0x2002c +/* [RC 1] Message length mismatch (relative to last indication) at the usem + interface. */ +#define XCM_REG_USEM_LENGTH_MIS 0x2022c +/* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_USEM_WEIGHT 0x200c8 +#define XCM_REG_WU_DA_CNT_CMD00 0x201d4 +#define XCM_REG_WU_DA_CNT_CMD01 0x201d8 +#define XCM_REG_WU_DA_CNT_CMD10 0x201dc +#define XCM_REG_WU_DA_CNT_CMD11 0x201e0 +#define XCM_REG_WU_DA_CNT_UPD_VAL00 0x201e4 +#define XCM_REG_WU_DA_CNT_UPD_VAL01 0x201e8 +#define XCM_REG_WU_DA_CNT_UPD_VAL10 0x201ec +#define XCM_REG_WU_DA_CNT_UPD_VAL11 0x201f0 +#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00 0x201c4 +#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01 0x201c8 +#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD10 0x201cc +#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD11 0x201d0 +/* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define XCM_REG_XCM_CFC_IFEN 0x20050 +/* [RW 14] Interrupt mask register #0 read/write */ +#define XCM_REG_XCM_INT_MASK 0x202b4 +/* [R 14] Interrupt register #0 read */ +#define XCM_REG_XCM_INT_STS 0x202a8 +/* [RW 30] Parity mask register #0 read/write */ +#define XCM_REG_XCM_PRTY_MASK 0x202c4 +/* [R 30] Parity register #0 read */ +#define XCM_REG_XCM_PRTY_STS 0x202b8 +/* [RC 30] Parity register #0 read clear */ +#define XCM_REG_XCM_PRTY_STS_CLR 0x202bc + +/* [RW 4] The size of AG context region 0 in REG-pairs. Designates the MS + REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). + Is used to determine the number of the AG context REG-pairs written back; + when the Reg1WbFlg isn't set. */ +#define XCM_REG_XCM_REG0_SZ 0x200f4 +/* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define XCM_REG_XCM_STORM0_IFEN 0x20004 +/* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define XCM_REG_XCM_STORM1_IFEN 0x20008 +/* [RW 1] CM - Timers Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_XCM_TM_IFEN 0x20020 +/* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define XCM_REG_XCM_XQM_IFEN 0x2000c +/* [RW 1] If set the Q index; received from the QM is inserted to event ID. */ +#define XCM_REG_XCM_XQM_USE_Q 0x200f0 +/* [RW 4] The value by which CFC updates the activity counter at QM bypass. */ +#define XCM_REG_XQM_BYP_ACT_UPD 0x200fc +/* [RW 6] QM output initial credit. Max credit available - 32.Write writes + the initial credit value; read returns the current value of the credit + counter. Must be initialized to 32 at start-up. */ +#define XCM_REG_XQM_INIT_CRD 0x20420 +/* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0 + stands for weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_XQM_P_WEIGHT 0x200e4 +/* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0 + stands for weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_XQM_S_WEIGHT 0x200e8 +/* [RW 28] The CM header value for QM request (primary). */ +#define XCM_REG_XQM_XCM_HDR_P 0x200a0 +/* [RW 28] The CM header value for QM request (secondary). */ +#define XCM_REG_XQM_XCM_HDR_S 0x200a4 +/* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define XCM_REG_XQM_XCM_IFEN 0x20014 +/* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define XCM_REG_XSDM_IFEN 0x20018 +/* [RC 1] Set at message length mismatch (relative to last indication) at + the SDM interface. */ +#define XCM_REG_XSDM_LENGTH_MIS 0x20220 +/* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_XSDM_WEIGHT 0x200e0 +/* [RW 17] Indirect access to the descriptor table of the XX protection + mechanism. The fields are: [5:0] - message length; 11:6] - message + pointer; 16:12] - next pointer. */ +#define XCM_REG_XX_DESCR_TABLE 0x20480 +#define XCM_REG_XX_DESCR_TABLE_SIZE 32 +/* [R 6] Used to read the XX protection Free counter. */ +#define XCM_REG_XX_FREE 0x20240 +/* [RW 6] Initial value for the credit counter; responsible for fulfilling + of the Input Stage XX protection buffer by the XX protection pending + messages. Max credit available - 3.Write writes the initial credit value; + read returns the current value of the credit counter. Must be initialized + to 2 at start-up. */ +#define XCM_REG_XX_INIT_CRD 0x20424 +/* [RW 6] The maximum number of pending messages; which may be stored in XX + protection. ~xcm_registers_xx_free.xx_free read on read. */ +#define XCM_REG_XX_MSG_NUM 0x20428 +/* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */ +#define XCM_REG_XX_OVFL_EVNT_ID 0x20058 +#define XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS (0x1<<0) +#define XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS (0x1<<1) +#define XMAC_CTRL_REG_LINE_LOCAL_LPBK (0x1<<2) +#define XMAC_CTRL_REG_RX_EN (0x1<<1) +#define XMAC_CTRL_REG_SOFT_RESET (0x1<<6) +#define XMAC_CTRL_REG_TX_EN (0x1<<0) +#define XMAC_PAUSE_CTRL_REG_RX_PAUSE_EN (0x1<<18) +#define XMAC_PAUSE_CTRL_REG_TX_PAUSE_EN (0x1<<17) +#define XMAC_PFC_CTRL_HI_REG_PFC_REFRESH_EN (0x1<<0) +#define XMAC_PFC_CTRL_HI_REG_PFC_STATS_EN (0x1<<3) +#define XMAC_PFC_CTRL_HI_REG_RX_PFC_EN (0x1<<4) +#define XMAC_PFC_CTRL_HI_REG_TX_PFC_EN (0x1<<5) +#define XMAC_REG_CLEAR_RX_LSS_STATUS 0x60 +#define XMAC_REG_CTRL 0 +/* [RW 16] Upper 48 bits of ctrl_sa register. Used as the SA in PAUSE/PFC + * packets transmitted by the MAC */ +#define XMAC_REG_CTRL_SA_HI 0x2c +/* [RW 32] Lower 48 bits of ctrl_sa register. Used as the SA in PAUSE/PFC + * packets transmitted by the MAC */ +#define XMAC_REG_CTRL_SA_LO 0x28 +#define XMAC_REG_PAUSE_CTRL 0x68 +#define XMAC_REG_PFC_CTRL 0x70 +#define XMAC_REG_PFC_CTRL_HI 0x74 +#define XMAC_REG_RX_LSS_STATUS 0x58 +/* [RW 14] Maximum packet size in receive direction; exclusive of preamble & + * CRC in strip mode */ +#define XMAC_REG_RX_MAX_SIZE 0x40 +#define XMAC_REG_TX_CTRL 0x20 +/* [RW 16] Indirect access to the XX table of the XX protection mechanism. + The fields are:[4:0] - tail pointer; 9:5] - Link List size; 14:10] - + header pointer. */ +#define XCM_REG_XX_TABLE 0x20500 +/* [RW 8] The event id for aggregated interrupt 0 */ +#define XSDM_REG_AGG_INT_EVENT_0 0x166038 +#define XSDM_REG_AGG_INT_EVENT_1 0x16603c +#define XSDM_REG_AGG_INT_EVENT_10 0x166060 +#define XSDM_REG_AGG_INT_EVENT_11 0x166064 +#define XSDM_REG_AGG_INT_EVENT_12 0x166068 +#define XSDM_REG_AGG_INT_EVENT_13 0x16606c +#define XSDM_REG_AGG_INT_EVENT_14 0x166070 +#define XSDM_REG_AGG_INT_EVENT_2 0x166040 +#define XSDM_REG_AGG_INT_EVENT_3 0x166044 +#define XSDM_REG_AGG_INT_EVENT_4 0x166048 +#define XSDM_REG_AGG_INT_EVENT_5 0x16604c +#define XSDM_REG_AGG_INT_EVENT_6 0x166050 +#define XSDM_REG_AGG_INT_EVENT_7 0x166054 +#define XSDM_REG_AGG_INT_EVENT_8 0x166058 +#define XSDM_REG_AGG_INT_EVENT_9 0x16605c +/* [RW 1] For each aggregated interrupt index whether the mode is normal (0) + or auto-mask-mode (1) */ +#define XSDM_REG_AGG_INT_MODE_0 0x1661b8 +#define XSDM_REG_AGG_INT_MODE_1 0x1661bc +/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */ +#define XSDM_REG_CFC_RSP_START_ADDR 0x166008 +/* [RW 16] The maximum value of the completion counter #0 */ +#define XSDM_REG_CMP_COUNTER_MAX0 0x16601c +/* [RW 16] The maximum value of the completion counter #1 */ +#define XSDM_REG_CMP_COUNTER_MAX1 0x166020 +/* [RW 16] The maximum value of the completion counter #2 */ +#define XSDM_REG_CMP_COUNTER_MAX2 0x166024 +/* [RW 16] The maximum value of the completion counter #3 */ +#define XSDM_REG_CMP_COUNTER_MAX3 0x166028 +/* [RW 13] The start address in the internal RAM for the completion + counters. */ +#define XSDM_REG_CMP_COUNTER_START_ADDR 0x16600c +#define XSDM_REG_ENABLE_IN1 0x166238 +#define XSDM_REG_ENABLE_IN2 0x16623c +#define XSDM_REG_ENABLE_OUT1 0x166240 +#define XSDM_REG_ENABLE_OUT2 0x166244 +/* [RW 4] The initial number of messages that can be sent to the pxp control + interface without receiving any ACK. */ +#define XSDM_REG_INIT_CREDIT_PXP_CTRL 0x1664bc +/* [ST 32] The number of ACK after placement messages received */ +#define XSDM_REG_NUM_OF_ACK_AFTER_PLACE 0x16627c +/* [ST 32] The number of packet end messages received from the parser */ +#define XSDM_REG_NUM_OF_PKT_END_MSG 0x166274 +/* [ST 32] The number of requests received from the pxp async if */ +#define XSDM_REG_NUM_OF_PXP_ASYNC_REQ 0x166278 +/* [ST 32] The number of commands received in queue 0 */ +#define XSDM_REG_NUM_OF_Q0_CMD 0x166248 +/* [ST 32] The number of commands received in queue 10 */ +#define XSDM_REG_NUM_OF_Q10_CMD 0x16626c +/* [ST 32] The number of commands received in queue 11 */ +#define XSDM_REG_NUM_OF_Q11_CMD 0x166270 +/* [ST 32] The number of commands received in queue 1 */ +#define XSDM_REG_NUM_OF_Q1_CMD 0x16624c +/* [ST 32] The number of commands received in queue 3 */ +#define XSDM_REG_NUM_OF_Q3_CMD 0x166250 +/* [ST 32] The number of commands received in queue 4 */ +#define XSDM_REG_NUM_OF_Q4_CMD 0x166254 +/* [ST 32] The number of commands received in queue 5 */ +#define XSDM_REG_NUM_OF_Q5_CMD 0x166258 +/* [ST 32] The number of commands received in queue 6 */ +#define XSDM_REG_NUM_OF_Q6_CMD 0x16625c +/* [ST 32] The number of commands received in queue 7 */ +#define XSDM_REG_NUM_OF_Q7_CMD 0x166260 +/* [ST 32] The number of commands received in queue 8 */ +#define XSDM_REG_NUM_OF_Q8_CMD 0x166264 +/* [ST 32] The number of commands received in queue 9 */ +#define XSDM_REG_NUM_OF_Q9_CMD 0x166268 +/* [RW 13] The start address in the internal RAM for queue counters */ +#define XSDM_REG_Q_COUNTER_START_ADDR 0x166010 +/* [W 17] Generate an operation after completion; bit-16 is + * AggVectIdx_valid; bits 15:8 are AggVectIdx; bits 7:5 are the TRIG and + * bits 4:0 are the T124Param[4:0] */ +#define XSDM_REG_OPERATION_GEN 0x1664c4 +/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */ +#define XSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0x166548 +/* [R 1] parser fifo empty in sdm_sync block */ +#define XSDM_REG_SYNC_PARSER_EMPTY 0x166550 +/* [R 1] parser serial fifo empty in sdm_sync block */ +#define XSDM_REG_SYNC_SYNC_EMPTY 0x166558 +/* [RW 32] Tick for timer counter. Applicable only when + ~xsdm_registers_timer_tick_enable.timer_tick_enable =1 */ +#define XSDM_REG_TIMER_TICK 0x166000 +/* [RW 32] Interrupt mask register #0 read/write */ +#define XSDM_REG_XSDM_INT_MASK_0 0x16629c +#define XSDM_REG_XSDM_INT_MASK_1 0x1662ac +/* [R 32] Interrupt register #0 read */ +#define XSDM_REG_XSDM_INT_STS_0 0x166290 +#define XSDM_REG_XSDM_INT_STS_1 0x1662a0 +/* [RW 11] Parity mask register #0 read/write */ +#define XSDM_REG_XSDM_PRTY_MASK 0x1662bc +/* [R 11] Parity register #0 read */ +#define XSDM_REG_XSDM_PRTY_STS 0x1662b0 +/* [RC 11] Parity register #0 read clear */ +#define XSDM_REG_XSDM_PRTY_STS_CLR 0x1662b4 +/* [RW 5] The number of time_slots in the arbitration cycle */ +#define XSEM_REG_ARB_CYCLE_SIZE 0x280034 +/* [RW 3] The source that is associated with arbitration element 0. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2 */ +#define XSEM_REG_ARB_ELEMENT0 0x280020 +/* [RW 3] The source that is associated with arbitration element 1. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~xsem_registers_arb_element0.arb_element0 */ +#define XSEM_REG_ARB_ELEMENT1 0x280024 +/* [RW 3] The source that is associated with arbitration element 2. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~xsem_registers_arb_element0.arb_element0 + and ~xsem_registers_arb_element1.arb_element1 */ +#define XSEM_REG_ARB_ELEMENT2 0x280028 +/* [RW 3] The source that is associated with arbitration element 3. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2.Could + not be equal to register ~xsem_registers_arb_element0.arb_element0 and + ~xsem_registers_arb_element1.arb_element1 and + ~xsem_registers_arb_element2.arb_element2 */ +#define XSEM_REG_ARB_ELEMENT3 0x28002c +/* [RW 3] The source that is associated with arbitration element 4. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~xsem_registers_arb_element0.arb_element0 + and ~xsem_registers_arb_element1.arb_element1 and + ~xsem_registers_arb_element2.arb_element2 and + ~xsem_registers_arb_element3.arb_element3 */ +#define XSEM_REG_ARB_ELEMENT4 0x280030 +#define XSEM_REG_ENABLE_IN 0x2800a4 +#define XSEM_REG_ENABLE_OUT 0x2800a8 +/* [RW 32] This address space contains all registers and memories that are + placed in SEM_FAST block. The SEM_FAST registers are described in + appendix B. In order to access the sem_fast registers the base address + ~fast_memory.fast_memory should be added to eachsem_fast register offset. */ +#define XSEM_REG_FAST_MEMORY 0x2a0000 +/* [RW 1] Disables input messages from FIC0 May be updated during run_time + by the microcode */ +#define XSEM_REG_FIC0_DISABLE 0x280224 +/* [RW 1] Disables input messages from FIC1 May be updated during run_time + by the microcode */ +#define XSEM_REG_FIC1_DISABLE 0x280234 +/* [RW 15] Interrupt table Read and write access to it is not possible in + the middle of the work */ +#define XSEM_REG_INT_TABLE 0x280400 +/* [ST 24] Statistics register. The number of messages that entered through + FIC0 */ +#define XSEM_REG_MSG_NUM_FIC0 0x280000 +/* [ST 24] Statistics register. The number of messages that entered through + FIC1 */ +#define XSEM_REG_MSG_NUM_FIC1 0x280004 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC0 */ +#define XSEM_REG_MSG_NUM_FOC0 0x280008 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC1 */ +#define XSEM_REG_MSG_NUM_FOC1 0x28000c +/* [ST 24] Statistics register. The number of messages that were sent to + FOC2 */ +#define XSEM_REG_MSG_NUM_FOC2 0x280010 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC3 */ +#define XSEM_REG_MSG_NUM_FOC3 0x280014 +/* [RW 1] Disables input messages from the passive buffer May be updated + during run_time by the microcode */ +#define XSEM_REG_PAS_DISABLE 0x28024c +/* [WB 128] Debug only. Passive buffer memory */ +#define XSEM_REG_PASSIVE_BUFFER 0x282000 +/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */ +#define XSEM_REG_PRAM 0x2c0000 +/* [R 16] Valid sleeping threads indication have bit per thread */ +#define XSEM_REG_SLEEP_THREADS_VALID 0x28026c +/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */ +#define XSEM_REG_SLOW_EXT_STORE_EMPTY 0x2802a0 +/* [RW 16] List of free threads . There is a bit per thread. */ +#define XSEM_REG_THREADS_LIST 0x2802e4 +/* [RW 3] The arbitration scheme of time_slot 0 */ +#define XSEM_REG_TS_0_AS 0x280038 +/* [RW 3] The arbitration scheme of time_slot 10 */ +#define XSEM_REG_TS_10_AS 0x280060 +/* [RW 3] The arbitration scheme of time_slot 11 */ +#define XSEM_REG_TS_11_AS 0x280064 +/* [RW 3] The arbitration scheme of time_slot 12 */ +#define XSEM_REG_TS_12_AS 0x280068 +/* [RW 3] The arbitration scheme of time_slot 13 */ +#define XSEM_REG_TS_13_AS 0x28006c +/* [RW 3] The arbitration scheme of time_slot 14 */ +#define XSEM_REG_TS_14_AS 0x280070 +/* [RW 3] The arbitration scheme of time_slot 15 */ +#define XSEM_REG_TS_15_AS 0x280074 +/* [RW 3] The arbitration scheme of time_slot 16 */ +#define XSEM_REG_TS_16_AS 0x280078 +/* [RW 3] The arbitration scheme of time_slot 17 */ +#define XSEM_REG_TS_17_AS 0x28007c +/* [RW 3] The arbitration scheme of time_slot 18 */ +#define XSEM_REG_TS_18_AS 0x280080 +/* [RW 3] The arbitration scheme of time_slot 1 */ +#define XSEM_REG_TS_1_AS 0x28003c +/* [RW 3] The arbitration scheme of time_slot 2 */ +#define XSEM_REG_TS_2_AS 0x280040 +/* [RW 3] The arbitration scheme of time_slot 3 */ +#define XSEM_REG_TS_3_AS 0x280044 +/* [RW 3] The arbitration scheme of time_slot 4 */ +#define XSEM_REG_TS_4_AS 0x280048 +/* [RW 3] The arbitration scheme of time_slot 5 */ +#define XSEM_REG_TS_5_AS 0x28004c +/* [RW 3] The arbitration scheme of time_slot 6 */ +#define XSEM_REG_TS_6_AS 0x280050 +/* [RW 3] The arbitration scheme of time_slot 7 */ +#define XSEM_REG_TS_7_AS 0x280054 +/* [RW 3] The arbitration scheme of time_slot 8 */ +#define XSEM_REG_TS_8_AS 0x280058 +/* [RW 3] The arbitration scheme of time_slot 9 */ +#define XSEM_REG_TS_9_AS 0x28005c +/* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64 + * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */ +#define XSEM_REG_VFPF_ERR_NUM 0x280380 +/* [RW 32] Interrupt mask register #0 read/write */ +#define XSEM_REG_XSEM_INT_MASK_0 0x280110 +#define XSEM_REG_XSEM_INT_MASK_1 0x280120 +/* [R 32] Interrupt register #0 read */ +#define XSEM_REG_XSEM_INT_STS_0 0x280104 +#define XSEM_REG_XSEM_INT_STS_1 0x280114 +/* [RW 32] Parity mask register #0 read/write */ +#define XSEM_REG_XSEM_PRTY_MASK_0 0x280130 +#define XSEM_REG_XSEM_PRTY_MASK_1 0x280140 +/* [R 32] Parity register #0 read */ +#define XSEM_REG_XSEM_PRTY_STS_0 0x280124 +#define XSEM_REG_XSEM_PRTY_STS_1 0x280134 +/* [RC 32] Parity register #0 read clear */ +#define XSEM_REG_XSEM_PRTY_STS_CLR_0 0x280128 +#define XSEM_REG_XSEM_PRTY_STS_CLR_1 0x280138 +#define MCPR_NVM_ACCESS_ENABLE_EN (1L<<0) +#define MCPR_NVM_ACCESS_ENABLE_WR_EN (1L<<1) +#define MCPR_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0) +#define MCPR_NVM_CFG4_FLASH_SIZE (0x7L<<0) +#define MCPR_NVM_COMMAND_DOIT (1L<<4) +#define MCPR_NVM_COMMAND_DONE (1L<<3) +#define MCPR_NVM_COMMAND_FIRST (1L<<7) +#define MCPR_NVM_COMMAND_LAST (1L<<8) +#define MCPR_NVM_COMMAND_WR (1L<<5) +#define MCPR_NVM_SW_ARB_ARB_ARB1 (1L<<9) +#define MCPR_NVM_SW_ARB_ARB_REQ_CLR1 (1L<<5) +#define MCPR_NVM_SW_ARB_ARB_REQ_SET1 (1L<<1) +#define BIGMAC_REGISTER_BMAC_CONTROL (0x00<<3) +#define BIGMAC_REGISTER_BMAC_XGXS_CONTROL (0x01<<3) +#define BIGMAC_REGISTER_CNT_MAX_SIZE (0x05<<3) +#define BIGMAC_REGISTER_RX_CONTROL (0x21<<3) +#define BIGMAC_REGISTER_RX_LLFC_MSG_FLDS (0x46<<3) +#define BIGMAC_REGISTER_RX_LSS_STATUS (0x43<<3) +#define BIGMAC_REGISTER_RX_MAX_SIZE (0x23<<3) +#define BIGMAC_REGISTER_RX_STAT_GR64 (0x26<<3) +#define BIGMAC_REGISTER_RX_STAT_GRIPJ (0x42<<3) +#define BIGMAC_REGISTER_TX_CONTROL (0x07<<3) +#define BIGMAC_REGISTER_TX_MAX_SIZE (0x09<<3) +#define BIGMAC_REGISTER_TX_PAUSE_THRESHOLD (0x0A<<3) +#define BIGMAC_REGISTER_TX_SOURCE_ADDR (0x08<<3) +#define BIGMAC_REGISTER_TX_STAT_GTBYT (0x20<<3) +#define BIGMAC_REGISTER_TX_STAT_GTPKT (0x0C<<3) +#define BIGMAC2_REGISTER_BMAC_CONTROL (0x00<<3) +#define BIGMAC2_REGISTER_BMAC_XGXS_CONTROL (0x01<<3) +#define BIGMAC2_REGISTER_CNT_MAX_SIZE (0x05<<3) +#define BIGMAC2_REGISTER_PFC_CONTROL (0x06<<3) +#define BIGMAC2_REGISTER_RX_CONTROL (0x3A<<3) +#define BIGMAC2_REGISTER_RX_LLFC_MSG_FLDS (0x62<<3) +#define BIGMAC2_REGISTER_RX_LSS_STAT (0x3E<<3) +#define BIGMAC2_REGISTER_RX_MAX_SIZE (0x3C<<3) +#define BIGMAC2_REGISTER_RX_STAT_GR64 (0x40<<3) +#define BIGMAC2_REGISTER_RX_STAT_GRIPJ (0x5f<<3) +#define BIGMAC2_REGISTER_RX_STAT_GRPP (0x51<<3) +#define BIGMAC2_REGISTER_TX_CONTROL (0x1C<<3) +#define BIGMAC2_REGISTER_TX_MAX_SIZE (0x1E<<3) +#define BIGMAC2_REGISTER_TX_PAUSE_CONTROL (0x20<<3) +#define BIGMAC2_REGISTER_TX_SOURCE_ADDR (0x1D<<3) +#define BIGMAC2_REGISTER_TX_STAT_GTBYT (0x39<<3) +#define BIGMAC2_REGISTER_TX_STAT_GTPOK (0x22<<3) +#define BIGMAC2_REGISTER_TX_STAT_GTPP (0x24<<3) +#define EMAC_LED_1000MB_OVERRIDE (1L<<1) +#define EMAC_LED_100MB_OVERRIDE (1L<<2) +#define EMAC_LED_10MB_OVERRIDE (1L<<3) +#define EMAC_LED_2500MB_OVERRIDE (1L<<12) +#define EMAC_LED_OVERRIDE (1L<<0) +#define EMAC_LED_TRAFFIC (1L<<6) +#define EMAC_MDIO_COMM_COMMAND_ADDRESS (0L<<26) +#define EMAC_MDIO_COMM_COMMAND_READ_22 (2L<<26) +#define EMAC_MDIO_COMM_COMMAND_READ_45 (3L<<26) +#define EMAC_MDIO_COMM_COMMAND_WRITE_22 (1L<<26) +#define EMAC_MDIO_COMM_COMMAND_WRITE_45 (1L<<26) +#define EMAC_MDIO_COMM_DATA (0xffffL<<0) +#define EMAC_MDIO_COMM_START_BUSY (1L<<29) +#define EMAC_MDIO_MODE_AUTO_POLL (1L<<4) +#define EMAC_MDIO_MODE_CLAUSE_45 (1L<<31) +#define EMAC_MDIO_MODE_CLOCK_CNT (0x3ffL<<16) +#define EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT 16 +#define EMAC_MDIO_STATUS_10MB (1L<<1) +#define EMAC_MODE_25G_MODE (1L<<5) +#define EMAC_MODE_HALF_DUPLEX (1L<<1) +#define EMAC_MODE_PORT_GMII (2L<<2) +#define EMAC_MODE_PORT_MII (1L<<2) +#define EMAC_MODE_PORT_MII_10M (3L<<2) +#define EMAC_MODE_RESET (1L<<0) +#define EMAC_REG_EMAC_LED 0xc +#define EMAC_REG_EMAC_MAC_MATCH 0x10 +#define EMAC_REG_EMAC_MDIO_COMM 0xac +#define EMAC_REG_EMAC_MDIO_MODE 0xb4 +#define EMAC_REG_EMAC_MDIO_STATUS 0xb0 +#define EMAC_REG_EMAC_MODE 0x0 +#define EMAC_REG_EMAC_RX_MODE 0xc8 +#define EMAC_REG_EMAC_RX_MTU_SIZE 0x9c +#define EMAC_REG_EMAC_RX_STAT_AC 0x180 +#define EMAC_REG_EMAC_RX_STAT_AC_28 0x1f4 +#define EMAC_REG_EMAC_RX_STAT_AC_COUNT 23 +#define EMAC_REG_EMAC_TX_MODE 0xbc +#define EMAC_REG_EMAC_TX_STAT_AC 0x280 +#define EMAC_REG_EMAC_TX_STAT_AC_COUNT 22 +#define EMAC_REG_RX_PFC_MODE 0x320 +#define EMAC_REG_RX_PFC_MODE_PRIORITIES (1L<<2) +#define EMAC_REG_RX_PFC_MODE_RX_EN (1L<<1) +#define EMAC_REG_RX_PFC_MODE_TX_EN (1L<<0) +#define EMAC_REG_RX_PFC_PARAM 0x324 +#define EMAC_REG_RX_PFC_PARAM_OPCODE_BITSHIFT 0 +#define EMAC_REG_RX_PFC_PARAM_PRIORITY_EN_BITSHIFT 16 +#define EMAC_REG_RX_PFC_STATS_XOFF_RCVD 0x328 +#define EMAC_REG_RX_PFC_STATS_XOFF_RCVD_COUNT (0xffff<<0) +#define EMAC_REG_RX_PFC_STATS_XOFF_SENT 0x330 +#define EMAC_REG_RX_PFC_STATS_XOFF_SENT_COUNT (0xffff<<0) +#define EMAC_REG_RX_PFC_STATS_XON_RCVD 0x32c +#define EMAC_REG_RX_PFC_STATS_XON_RCVD_COUNT (0xffff<<0) +#define EMAC_REG_RX_PFC_STATS_XON_SENT 0x334 +#define EMAC_REG_RX_PFC_STATS_XON_SENT_COUNT (0xffff<<0) +#define EMAC_RX_MODE_FLOW_EN (1L<<2) +#define EMAC_RX_MODE_KEEP_MAC_CONTROL (1L<<3) +#define EMAC_RX_MODE_KEEP_VLAN_TAG (1L<<10) +#define EMAC_RX_MODE_PROMISCUOUS (1L<<8) +#define EMAC_RX_MODE_RESET (1L<<0) +#define EMAC_RX_MTU_SIZE_JUMBO_ENA (1L<<31) +#define EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3) +#define EMAC_TX_MODE_FLOW_EN (1L<<4) +#define EMAC_TX_MODE_RESET (1L<<0) +#define MISC_REGISTERS_GPIO_0 0 +#define MISC_REGISTERS_GPIO_1 1 +#define MISC_REGISTERS_GPIO_2 2 +#define MISC_REGISTERS_GPIO_3 3 +#define MISC_REGISTERS_GPIO_CLR_POS 16 +#define MISC_REGISTERS_GPIO_FLOAT (0xffL<<24) +#define MISC_REGISTERS_GPIO_FLOAT_POS 24 +#define MISC_REGISTERS_GPIO_HIGH 1 +#define MISC_REGISTERS_GPIO_INPUT_HI_Z 2 +#define MISC_REGISTERS_GPIO_INT_CLR_POS 24 +#define MISC_REGISTERS_GPIO_INT_OUTPUT_CLR 0 +#define MISC_REGISTERS_GPIO_INT_OUTPUT_SET 1 +#define MISC_REGISTERS_GPIO_INT_SET_POS 16 +#define MISC_REGISTERS_GPIO_LOW 0 +#define MISC_REGISTERS_GPIO_OUTPUT_HIGH 1 +#define MISC_REGISTERS_GPIO_OUTPUT_LOW 0 +#define MISC_REGISTERS_GPIO_PORT_SHIFT 4 +#define MISC_REGISTERS_GPIO_SET_POS 8 +#define MISC_REGISTERS_RESET_REG_1_CLEAR 0x588 +#define MISC_REGISTERS_RESET_REG_1_RST_HC (0x1<<29) +#define MISC_REGISTERS_RESET_REG_1_RST_NIG (0x1<<7) +#define MISC_REGISTERS_RESET_REG_1_RST_PXP (0x1<<26) +#define MISC_REGISTERS_RESET_REG_1_RST_PXPV (0x1<<27) +#define MISC_REGISTERS_RESET_REG_1_SET 0x584 +#define MISC_REGISTERS_RESET_REG_2_CLEAR 0x598 +#define MISC_REGISTERS_RESET_REG_2_MSTAT0 (0x1<<24) +#define MISC_REGISTERS_RESET_REG_2_MSTAT1 (0x1<<25) +#define MISC_REGISTERS_RESET_REG_2_PGLC (0x1<<19) +#define MISC_REGISTERS_RESET_REG_2_RST_ATC (0x1<<17) +#define MISC_REGISTERS_RESET_REG_2_RST_BMAC0 (0x1<<0) +#define MISC_REGISTERS_RESET_REG_2_RST_BMAC1 (0x1<<1) +#define MISC_REGISTERS_RESET_REG_2_RST_EMAC0 (0x1<<2) +#define MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE (0x1<<14) +#define MISC_REGISTERS_RESET_REG_2_RST_EMAC1 (0x1<<3) +#define MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE (0x1<<15) +#define MISC_REGISTERS_RESET_REG_2_RST_GRC (0x1<<4) +#define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B (0x1<<6) +#define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CORE (0x1<<8) +#define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CPU (0x1<<7) +#define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE (0x1<<5) +#define MISC_REGISTERS_RESET_REG_2_RST_MDIO (0x1<<13) +#define MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE (0x1<<11) +#define MISC_REGISTERS_RESET_REG_2_RST_PCI_MDIO (0x1<<13) +#define MISC_REGISTERS_RESET_REG_2_RST_RBCN (0x1<<9) +#define MISC_REGISTERS_RESET_REG_2_SET 0x594 +#define MISC_REGISTERS_RESET_REG_2_UMAC0 (0x1<<20) +#define MISC_REGISTERS_RESET_REG_2_UMAC1 (0x1<<21) +#define MISC_REGISTERS_RESET_REG_2_XMAC (0x1<<22) +#define MISC_REGISTERS_RESET_REG_2_XMAC_SOFT (0x1<<23) +#define MISC_REGISTERS_RESET_REG_3_CLEAR 0x5a8 +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_IDDQ (0x1<<1) +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN (0x1<<2) +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN_SD (0x1<<3) +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_RSTB_HW (0x1<<0) +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_IDDQ (0x1<<5) +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN (0x1<<6) +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN_SD (0x1<<7) +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW (0x1<<4) +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB (0x1<<8) +#define MISC_REGISTERS_RESET_REG_3_SET 0x5a4 +#define MISC_REGISTERS_SPIO_4 4 +#define MISC_REGISTERS_SPIO_5 5 +#define MISC_REGISTERS_SPIO_7 7 +#define MISC_REGISTERS_SPIO_CLR_POS 16 +#define MISC_REGISTERS_SPIO_FLOAT (0xffL<<24) +#define MISC_REGISTERS_SPIO_FLOAT_POS 24 +#define MISC_REGISTERS_SPIO_INPUT_HI_Z 2 +#define MISC_REGISTERS_SPIO_INT_OLD_SET_POS 16 +#define MISC_REGISTERS_SPIO_OUTPUT_HIGH 1 +#define MISC_REGISTERS_SPIO_OUTPUT_LOW 0 +#define MISC_REGISTERS_SPIO_SET_POS 8 +#define HW_LOCK_DRV_FLAGS 10 +#define HW_LOCK_MAX_RESOURCE_VALUE 31 +#define HW_LOCK_RESOURCE_GPIO 1 +#define HW_LOCK_RESOURCE_MDIO 0 +#define HW_LOCK_RESOURCE_PORT0_ATT_MASK 3 +#define HW_LOCK_RESOURCE_RECOVERY_LEADER_0 8 +#define HW_LOCK_RESOURCE_RECOVERY_LEADER_1 9 +#define HW_LOCK_RESOURCE_SPIO 2 +#define HW_LOCK_RESOURCE_RESET 5 +#define AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT (0x1<<4) +#define AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR (0x1<<5) +#define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (0x1<<18) +#define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT (0x1<<31) +#define AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR (0x1<<30) +#define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT (0x1<<9) +#define AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR (0x1<<8) +#define AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT (0x1<<7) +#define AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR (0x1<<6) +#define AEU_INPUTS_ATTN_BITS_CSDM_HW_INTERRUPT (0x1<<29) +#define AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR (0x1<<28) +#define AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT (0x1<<1) +#define AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR (0x1<<0) +#define AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR (0x1<<18) +#define AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT (0x1<<11) +#define AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR (0x1<<10) +#define AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT (0x1<<13) +#define AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR (0x1<<12) +#define AEU_INPUTS_ATTN_BITS_GPIO0_FUNCTION_0 (0x1<<2) +#define AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR (0x1<<12) +#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY (0x1<<28) +#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY (0x1<<31) +#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY (0x1<<29) +#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY (0x1<<30) +#define AEU_INPUTS_ATTN_BITS_MISC_HW_INTERRUPT (0x1<<15) +#define AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR (0x1<<14) +#define AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR (0x1<<14) +#define AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR (0x1<<20) +#define AEU_INPUTS_ATTN_BITS_PBCLIENT_HW_INTERRUPT (0x1<<31) +#define AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR (0x1<<30) +#define AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR (0x1<<0) +#define AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT (0x1<<2) +#define AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR (0x1<<3) +#define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT (0x1<<5) +#define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR (0x1<<4) +#define AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT (0x1<<3) +#define AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR (0x1<<2) +#define AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT (0x1<<3) +#define AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR (0x1<<2) +#define AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR (0x1<<22) +#define AEU_INPUTS_ATTN_BITS_SPIO5 (0x1<<15) +#define AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT (0x1<<27) +#define AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR (0x1<<26) +#define AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT (0x1<<5) +#define AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR (0x1<<4) +#define AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT (0x1<<25) +#define AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR (0x1<<24) +#define AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT (0x1<<29) +#define AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR (0x1<<28) +#define AEU_INPUTS_ATTN_BITS_UCM_HW_INTERRUPT (0x1<<23) +#define AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR (0x1<<22) +#define AEU_INPUTS_ATTN_BITS_UPB_HW_INTERRUPT (0x1<<27) +#define AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR (0x1<<26) +#define AEU_INPUTS_ATTN_BITS_USDM_HW_INTERRUPT (0x1<<21) +#define AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR (0x1<<20) +#define AEU_INPUTS_ATTN_BITS_USEMI_HW_INTERRUPT (0x1<<25) +#define AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR (0x1<<24) +#define AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR (0x1<<16) +#define AEU_INPUTS_ATTN_BITS_XCM_HW_INTERRUPT (0x1<<9) +#define AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR (0x1<<8) +#define AEU_INPUTS_ATTN_BITS_XSDM_HW_INTERRUPT (0x1<<7) +#define AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR (0x1<<6) +#define AEU_INPUTS_ATTN_BITS_XSEMI_HW_INTERRUPT (0x1<<11) +#define AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR (0x1<<10) + +#define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0 (0x1<<5) +#define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1 (0x1<<9) + +#define RESERVED_GENERAL_ATTENTION_BIT_0 0 + +#define EVEREST_GEN_ATTN_IN_USE_MASK 0x7ffe0 +#define EVEREST_LATCHED_ATTN_IN_USE_MASK 0xffe00000 + +#define RESERVED_GENERAL_ATTENTION_BIT_6 6 +#define RESERVED_GENERAL_ATTENTION_BIT_7 7 +#define RESERVED_GENERAL_ATTENTION_BIT_8 8 +#define RESERVED_GENERAL_ATTENTION_BIT_9 9 +#define RESERVED_GENERAL_ATTENTION_BIT_10 10 +#define RESERVED_GENERAL_ATTENTION_BIT_11 11 +#define RESERVED_GENERAL_ATTENTION_BIT_12 12 +#define RESERVED_GENERAL_ATTENTION_BIT_13 13 +#define RESERVED_GENERAL_ATTENTION_BIT_14 14 +#define RESERVED_GENERAL_ATTENTION_BIT_15 15 +#define RESERVED_GENERAL_ATTENTION_BIT_16 16 +#define RESERVED_GENERAL_ATTENTION_BIT_17 17 +#define RESERVED_GENERAL_ATTENTION_BIT_18 18 +#define RESERVED_GENERAL_ATTENTION_BIT_19 19 +#define RESERVED_GENERAL_ATTENTION_BIT_20 20 +#define RESERVED_GENERAL_ATTENTION_BIT_21 21 + +/* storm asserts attention bits */ +#define TSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_7 +#define USTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_8 +#define CSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_9 +#define XSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_10 + +/* mcp error attention bit */ +#define MCP_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_11 + +/*E1H NIG status sync attention mapped to group 4-7*/ +#define LINK_SYNC_ATTENTION_BIT_FUNC_0 RESERVED_GENERAL_ATTENTION_BIT_12 +#define LINK_SYNC_ATTENTION_BIT_FUNC_1 RESERVED_GENERAL_ATTENTION_BIT_13 +#define LINK_SYNC_ATTENTION_BIT_FUNC_2 RESERVED_GENERAL_ATTENTION_BIT_14 +#define LINK_SYNC_ATTENTION_BIT_FUNC_3 RESERVED_GENERAL_ATTENTION_BIT_15 +#define LINK_SYNC_ATTENTION_BIT_FUNC_4 RESERVED_GENERAL_ATTENTION_BIT_16 +#define LINK_SYNC_ATTENTION_BIT_FUNC_5 RESERVED_GENERAL_ATTENTION_BIT_17 +#define LINK_SYNC_ATTENTION_BIT_FUNC_6 RESERVED_GENERAL_ATTENTION_BIT_18 +#define LINK_SYNC_ATTENTION_BIT_FUNC_7 RESERVED_GENERAL_ATTENTION_BIT_19 + + +#define LATCHED_ATTN_RBCR 23 +#define LATCHED_ATTN_RBCT 24 +#define LATCHED_ATTN_RBCN 25 +#define LATCHED_ATTN_RBCU 26 +#define LATCHED_ATTN_RBCP 27 +#define LATCHED_ATTN_TIMEOUT_GRC 28 +#define LATCHED_ATTN_RSVD_GRC 29 +#define LATCHED_ATTN_ROM_PARITY_MCP 30 +#define LATCHED_ATTN_UM_RX_PARITY_MCP 31 +#define LATCHED_ATTN_UM_TX_PARITY_MCP 32 +#define LATCHED_ATTN_SCPAD_PARITY_MCP 33 + +#define GENERAL_ATTEN_WORD(atten_name) ((94 + atten_name) / 32) +#define GENERAL_ATTEN_OFFSET(atten_name)\ + (1UL << ((94 + atten_name) % 32)) +/* + * This file defines GRC base address for every block. + * This file is included by chipsim, asm microcode and cpp microcode. + * These values are used in Design.xml on regBase attribute + * Use the base with the generated offsets of specific registers. + */ + +#define GRCBASE_PXPCS 0x000000 +#define GRCBASE_PCICONFIG 0x002000 +#define GRCBASE_PCIREG 0x002400 +#define GRCBASE_EMAC0 0x008000 +#define GRCBASE_EMAC1 0x008400 +#define GRCBASE_DBU 0x008800 +#define GRCBASE_MISC 0x00A000 +#define GRCBASE_DBG 0x00C000 +#define GRCBASE_NIG 0x010000 +#define GRCBASE_XCM 0x020000 +#define GRCBASE_PRS 0x040000 +#define GRCBASE_SRCH 0x040400 +#define GRCBASE_TSDM 0x042000 +#define GRCBASE_TCM 0x050000 +#define GRCBASE_BRB1 0x060000 +#define GRCBASE_MCP 0x080000 +#define GRCBASE_UPB 0x0C1000 +#define GRCBASE_CSDM 0x0C2000 +#define GRCBASE_USDM 0x0C4000 +#define GRCBASE_CCM 0x0D0000 +#define GRCBASE_UCM 0x0E0000 +#define GRCBASE_CDU 0x101000 +#define GRCBASE_DMAE 0x102000 +#define GRCBASE_PXP 0x103000 +#define GRCBASE_CFC 0x104000 +#define GRCBASE_HC 0x108000 +#define GRCBASE_PXP2 0x120000 +#define GRCBASE_PBF 0x140000 +#define GRCBASE_UMAC0 0x160000 +#define GRCBASE_UMAC1 0x160400 +#define GRCBASE_XPB 0x161000 +#define GRCBASE_MSTAT0 0x162000 +#define GRCBASE_MSTAT1 0x162800 +#define GRCBASE_XMAC0 0x163000 +#define GRCBASE_XMAC1 0x163800 +#define GRCBASE_TIMERS 0x164000 +#define GRCBASE_XSDM 0x166000 +#define GRCBASE_QM 0x168000 +#define GRCBASE_DQ 0x170000 +#define GRCBASE_TSEM 0x180000 +#define GRCBASE_CSEM 0x200000 +#define GRCBASE_XSEM 0x280000 +#define GRCBASE_USEM 0x300000 +#define GRCBASE_MISC_AEU GRCBASE_MISC + + +/* offset of configuration space in the pci core register */ +#define PCICFG_OFFSET 0x2000 +#define PCICFG_VENDOR_ID_OFFSET 0x00 +#define PCICFG_DEVICE_ID_OFFSET 0x02 +#define PCICFG_COMMAND_OFFSET 0x04 +#define PCICFG_COMMAND_IO_SPACE (1<<0) +#define PCICFG_COMMAND_MEM_SPACE (1<<1) +#define PCICFG_COMMAND_BUS_MASTER (1<<2) +#define PCICFG_COMMAND_SPECIAL_CYCLES (1<<3) +#define PCICFG_COMMAND_MWI_CYCLES (1<<4) +#define PCICFG_COMMAND_VGA_SNOOP (1<<5) +#define PCICFG_COMMAND_PERR_ENA (1<<6) +#define PCICFG_COMMAND_STEPPING (1<<7) +#define PCICFG_COMMAND_SERR_ENA (1<<8) +#define PCICFG_COMMAND_FAST_B2B (1<<9) +#define PCICFG_COMMAND_INT_DISABLE (1<<10) +#define PCICFG_COMMAND_RESERVED (0x1f<<11) +#define PCICFG_STATUS_OFFSET 0x06 +#define PCICFG_REVESION_ID_OFFSET 0x08 +#define PCICFG_CACHE_LINE_SIZE 0x0c +#define PCICFG_LATENCY_TIMER 0x0d +#define PCICFG_BAR_1_LOW 0x10 +#define PCICFG_BAR_1_HIGH 0x14 +#define PCICFG_BAR_2_LOW 0x18 +#define PCICFG_BAR_2_HIGH 0x1c +#define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET 0x2c +#define PCICFG_SUBSYSTEM_ID_OFFSET 0x2e +#define PCICFG_INT_LINE 0x3c +#define PCICFG_INT_PIN 0x3d +#define PCICFG_PM_CAPABILITY 0x48 +#define PCICFG_PM_CAPABILITY_VERSION (0x3<<16) +#define PCICFG_PM_CAPABILITY_CLOCK (1<<19) +#define PCICFG_PM_CAPABILITY_RESERVED (1<<20) +#define PCICFG_PM_CAPABILITY_DSI (1<<21) +#define PCICFG_PM_CAPABILITY_AUX_CURRENT (0x7<<22) +#define PCICFG_PM_CAPABILITY_D1_SUPPORT (1<<25) +#define PCICFG_PM_CAPABILITY_D2_SUPPORT (1<<26) +#define PCICFG_PM_CAPABILITY_PME_IN_D0 (1<<27) +#define PCICFG_PM_CAPABILITY_PME_IN_D1 (1<<28) +#define PCICFG_PM_CAPABILITY_PME_IN_D2 (1<<29) +#define PCICFG_PM_CAPABILITY_PME_IN_D3_HOT (1<<30) +#define PCICFG_PM_CAPABILITY_PME_IN_D3_COLD (1<<31) +#define PCICFG_PM_CSR_OFFSET 0x4c +#define PCICFG_PM_CSR_STATE (0x3<<0) +#define PCICFG_PM_CSR_PME_ENABLE (1<<8) +#define PCICFG_PM_CSR_PME_STATUS (1<<15) +#define PCICFG_MSI_CAP_ID_OFFSET 0x58 +#define PCICFG_MSI_CONTROL_ENABLE (0x1<<16) +#define PCICFG_MSI_CONTROL_MCAP (0x7<<17) +#define PCICFG_MSI_CONTROL_MENA (0x7<<20) +#define PCICFG_MSI_CONTROL_64_BIT_ADDR_CAP (0x1<<23) +#define PCICFG_MSI_CONTROL_MSI_PVMASK_CAPABLE (0x1<<24) +#define PCICFG_GRC_ADDRESS 0x78 +#define PCICFG_GRC_DATA 0x80 +#define PCICFG_MSIX_CAP_ID_OFFSET 0xa0 +#define PCICFG_MSIX_CONTROL_TABLE_SIZE (0x7ff<<16) +#define PCICFG_MSIX_CONTROL_RESERVED (0x7<<27) +#define PCICFG_MSIX_CONTROL_FUNC_MASK (0x1<<30) +#define PCICFG_MSIX_CONTROL_MSIX_ENABLE (0x1<<31) + +#define PCICFG_DEVICE_CONTROL 0xb4 +#define PCICFG_DEVICE_STATUS 0xb6 +#define PCICFG_DEVICE_STATUS_CORR_ERR_DET (1<<0) +#define PCICFG_DEVICE_STATUS_NON_FATAL_ERR_DET (1<<1) +#define PCICFG_DEVICE_STATUS_FATAL_ERR_DET (1<<2) +#define PCICFG_DEVICE_STATUS_UNSUP_REQ_DET (1<<3) +#define PCICFG_DEVICE_STATUS_AUX_PWR_DET (1<<4) +#define PCICFG_DEVICE_STATUS_NO_PEND (1<<5) +#define PCICFG_LINK_CONTROL 0xbc + + +#define BAR_USTRORM_INTMEM 0x400000 +#define BAR_CSTRORM_INTMEM 0x410000 +#define BAR_XSTRORM_INTMEM 0x420000 +#define BAR_TSTRORM_INTMEM 0x430000 + +/* for accessing the IGU in case of status block ACK */ +#define BAR_IGU_INTMEM 0x440000 + +#define BAR_DOORBELL_OFFSET 0x800000 + +#define BAR_ME_REGISTER 0x450000 + +/* config_2 offset */ +#define GRC_CONFIG_2_SIZE_REG 0x408 +#define PCI_CONFIG_2_BAR1_SIZE (0xfL<<0) +#define PCI_CONFIG_2_BAR1_SIZE_DISABLED (0L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_64K (1L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_128K (2L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_256K (3L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_512K (4L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_1M (5L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_2M (6L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_4M (7L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_8M (8L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_16M (9L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_32M (10L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_64M (11L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_128M (12L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_256M (13L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_512M (14L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_1G (15L<<0) +#define PCI_CONFIG_2_BAR1_64ENA (1L<<4) +#define PCI_CONFIG_2_EXP_ROM_RETRY (1L<<5) +#define PCI_CONFIG_2_CFG_CYCLE_RETRY (1L<<6) +#define PCI_CONFIG_2_FIRST_CFG_DONE (1L<<7) +#define PCI_CONFIG_2_EXP_ROM_SIZE (0xffL<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_DISABLED (0L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_2K (1L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_4K (2L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_8K (3L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_16K (4L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_32K (5L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_64K (6L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_128K (7L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_256K (8L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_512K (9L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_1M (10L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_2M (11L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_4M (12L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_8M (13L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_16M (14L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_32M (15L<<8) +#define PCI_CONFIG_2_BAR_PREFETCH (1L<<16) +#define PCI_CONFIG_2_RESERVED0 (0x7fffL<<17) + +/* config_3 offset */ +#define GRC_CONFIG_3_SIZE_REG 0x40c +#define PCI_CONFIG_3_STICKY_BYTE (0xffL<<0) +#define PCI_CONFIG_3_FORCE_PME (1L<<24) +#define PCI_CONFIG_3_PME_STATUS (1L<<25) +#define PCI_CONFIG_3_PME_ENABLE (1L<<26) +#define PCI_CONFIG_3_PM_STATE (0x3L<<27) +#define PCI_CONFIG_3_VAUX_PRESET (1L<<30) +#define PCI_CONFIG_3_PCI_POWER (1L<<31) + +#define GRC_BAR2_CONFIG 0x4e0 +#define PCI_CONFIG_2_BAR2_SIZE (0xfL<<0) +#define PCI_CONFIG_2_BAR2_SIZE_DISABLED (0L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_64K (1L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_128K (2L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_256K (3L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_512K (4L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_1M (5L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_2M (6L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_4M (7L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_8M (8L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_16M (9L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_32M (10L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_64M (11L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_128M (12L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_256M (13L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_512M (14L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_1G (15L<<0) +#define PCI_CONFIG_2_BAR2_64ENA (1L<<4) + +#define PCI_PM_DATA_A 0x410 +#define PCI_PM_DATA_B 0x414 +#define PCI_ID_VAL1 0x434 +#define PCI_ID_VAL2 0x438 + +#define PXPCS_TL_CONTROL_5 0x814 +#define PXPCS_TL_CONTROL_5_UNKNOWNTYPE_ERR_ATTN (1 << 29) /*WC*/ +#define PXPCS_TL_CONTROL_5_BOUNDARY4K_ERR_ATTN (1 << 28) /*WC*/ +#define PXPCS_TL_CONTROL_5_MRRS_ERR_ATTN (1 << 27) /*WC*/ +#define PXPCS_TL_CONTROL_5_MPS_ERR_ATTN (1 << 26) /*WC*/ +#define PXPCS_TL_CONTROL_5_TTX_BRIDGE_FORWARD_ERR (1 << 25) /*WC*/ +#define PXPCS_TL_CONTROL_5_TTX_TXINTF_OVERFLOW (1 << 24) /*WC*/ +#define PXPCS_TL_CONTROL_5_PHY_ERR_ATTN (1 << 23) /*RO*/ +#define PXPCS_TL_CONTROL_5_DL_ERR_ATTN (1 << 22) /*RO*/ +#define PXPCS_TL_CONTROL_5_TTX_ERR_NP_TAG_IN_USE (1 << 21) /*WC*/ +#define PXPCS_TL_CONTROL_5_TRX_ERR_UNEXP_RTAG (1 << 20) /*WC*/ +#define PXPCS_TL_CONTROL_5_PRI_SIG_TARGET_ABORT1 (1 << 19) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_UNSPPORT1 (1 << 18) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_ECRC1 (1 << 17) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_MALF_TLP1 (1 << 16) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_RX_OFLOW1 (1 << 15) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_UNEXP_CPL1 (1 << 14) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_MASTER_ABRT1 (1 << 13) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_CPL_TIMEOUT1 (1 << 12) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_FC_PRTL1 (1 << 11) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_PSND_TLP1 (1 << 10) /*WC*/ +#define PXPCS_TL_CONTROL_5_PRI_SIG_TARGET_ABORT (1 << 9) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_UNSPPORT (1 << 8) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_ECRC (1 << 7) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_MALF_TLP (1 << 6) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_RX_OFLOW (1 << 5) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_UNEXP_CPL (1 << 4) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_MASTER_ABRT (1 << 3) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_CPL_TIMEOUT (1 << 2) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_FC_PRTL (1 << 1) /*WC*/ +#define PXPCS_TL_CONTROL_5_ERR_PSND_TLP (1 << 0) /*WC*/ + + +#define PXPCS_TL_FUNC345_STAT 0x854 +#define PXPCS_TL_FUNC345_STAT_PRI_SIG_TARGET_ABORT4 (1 << 29) /* WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT4\ + (1 << 28) /* Unsupported Request Error Status in function4, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_ECRC4\ + (1 << 27) /* ECRC Error TLP Status Status in function 4, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_MALF_TLP4\ + (1 << 26) /* Malformed TLP Status Status in function 4, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_RX_OFLOW4\ + (1 << 25) /* Receiver Overflow Status Status in function 4, if \ + set, generate pcie_err_attn output when this error is seen.. WC \ + */ +#define PXPCS_TL_FUNC345_STAT_ERR_UNEXP_CPL4\ + (1 << 24) /* Unexpected Completion Status Status in function 4, \ + if set, generate pcie_err_attn output when this error is seen. WC \ + */ +#define PXPCS_TL_FUNC345_STAT_ERR_MASTER_ABRT4\ + (1 << 23) /* Receive UR Statusin function 4. If set, generate \ + pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_CPL_TIMEOUT4\ + (1 << 22) /* Completer Timeout Status Status in function 4, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_FC_PRTL4\ + (1 << 21) /* Flow Control Protocol Error Status Status in \ + function 4, if set, generate pcie_err_attn output when this error \ + is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_PSND_TLP4\ + (1 << 20) /* Poisoned Error Status Status in function 4, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC345_STAT_PRI_SIG_TARGET_ABORT3 (1 << 19) /* WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT3\ + (1 << 18) /* Unsupported Request Error Status in function3, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_ECRC3\ + (1 << 17) /* ECRC Error TLP Status Status in function 3, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_MALF_TLP3\ + (1 << 16) /* Malformed TLP Status Status in function 3, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_RX_OFLOW3\ + (1 << 15) /* Receiver Overflow Status Status in function 3, if \ + set, generate pcie_err_attn output when this error is seen.. WC \ + */ +#define PXPCS_TL_FUNC345_STAT_ERR_UNEXP_CPL3\ + (1 << 14) /* Unexpected Completion Status Status in function 3, \ + if set, generate pcie_err_attn output when this error is seen. WC \ + */ +#define PXPCS_TL_FUNC345_STAT_ERR_MASTER_ABRT3\ + (1 << 13) /* Receive UR Statusin function 3. If set, generate \ + pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_CPL_TIMEOUT3\ + (1 << 12) /* Completer Timeout Status Status in function 3, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_FC_PRTL3\ + (1 << 11) /* Flow Control Protocol Error Status Status in \ + function 3, if set, generate pcie_err_attn output when this error \ + is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_PSND_TLP3\ + (1 << 10) /* Poisoned Error Status Status in function 3, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC345_STAT_PRI_SIG_TARGET_ABORT2 (1 << 9) /* WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT2\ + (1 << 8) /* Unsupported Request Error Status for Function 2, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_ECRC2\ + (1 << 7) /* ECRC Error TLP Status Status for Function 2, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_MALF_TLP2\ + (1 << 6) /* Malformed TLP Status Status for Function 2, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_RX_OFLOW2\ + (1 << 5) /* Receiver Overflow Status Status for Function 2, if \ + set, generate pcie_err_attn output when this error is seen.. WC \ + */ +#define PXPCS_TL_FUNC345_STAT_ERR_UNEXP_CPL2\ + (1 << 4) /* Unexpected Completion Status Status for Function 2, \ + if set, generate pcie_err_attn output when this error is seen. WC \ + */ +#define PXPCS_TL_FUNC345_STAT_ERR_MASTER_ABRT2\ + (1 << 3) /* Receive UR Statusfor Function 2. If set, generate \ + pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_CPL_TIMEOUT2\ + (1 << 2) /* Completer Timeout Status Status for Function 2, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_FC_PRTL2\ + (1 << 1) /* Flow Control Protocol Error Status Status for \ + Function 2, if set, generate pcie_err_attn output when this error \ + is seen. WC */ +#define PXPCS_TL_FUNC345_STAT_ERR_PSND_TLP2\ + (1 << 0) /* Poisoned Error Status Status for Function 2, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ + + +#define PXPCS_TL_FUNC678_STAT 0x85C +#define PXPCS_TL_FUNC678_STAT_PRI_SIG_TARGET_ABORT7 (1 << 29) /* WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT7\ + (1 << 28) /* Unsupported Request Error Status in function7, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_ECRC7\ + (1 << 27) /* ECRC Error TLP Status Status in function 7, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_MALF_TLP7\ + (1 << 26) /* Malformed TLP Status Status in function 7, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_RX_OFLOW7\ + (1 << 25) /* Receiver Overflow Status Status in function 7, if \ + set, generate pcie_err_attn output when this error is seen.. WC \ + */ +#define PXPCS_TL_FUNC678_STAT_ERR_UNEXP_CPL7\ + (1 << 24) /* Unexpected Completion Status Status in function 7, \ + if set, generate pcie_err_attn output when this error is seen. WC \ + */ +#define PXPCS_TL_FUNC678_STAT_ERR_MASTER_ABRT7\ + (1 << 23) /* Receive UR Statusin function 7. If set, generate \ + pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_CPL_TIMEOUT7\ + (1 << 22) /* Completer Timeout Status Status in function 7, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_FC_PRTL7\ + (1 << 21) /* Flow Control Protocol Error Status Status in \ + function 7, if set, generate pcie_err_attn output when this error \ + is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_PSND_TLP7\ + (1 << 20) /* Poisoned Error Status Status in function 7, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC678_STAT_PRI_SIG_TARGET_ABORT6 (1 << 19) /* WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT6\ + (1 << 18) /* Unsupported Request Error Status in function6, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_ECRC6\ + (1 << 17) /* ECRC Error TLP Status Status in function 6, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_MALF_TLP6\ + (1 << 16) /* Malformed TLP Status Status in function 6, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_RX_OFLOW6\ + (1 << 15) /* Receiver Overflow Status Status in function 6, if \ + set, generate pcie_err_attn output when this error is seen.. WC \ + */ +#define PXPCS_TL_FUNC678_STAT_ERR_UNEXP_CPL6\ + (1 << 14) /* Unexpected Completion Status Status in function 6, \ + if set, generate pcie_err_attn output when this error is seen. WC \ + */ +#define PXPCS_TL_FUNC678_STAT_ERR_MASTER_ABRT6\ + (1 << 13) /* Receive UR Statusin function 6. If set, generate \ + pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_CPL_TIMEOUT6\ + (1 << 12) /* Completer Timeout Status Status in function 6, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_FC_PRTL6\ + (1 << 11) /* Flow Control Protocol Error Status Status in \ + function 6, if set, generate pcie_err_attn output when this error \ + is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_PSND_TLP6\ + (1 << 10) /* Poisoned Error Status Status in function 6, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC678_STAT_PRI_SIG_TARGET_ABORT5 (1 << 9) /* WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT5\ + (1 << 8) /* Unsupported Request Error Status for Function 5, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_ECRC5\ + (1 << 7) /* ECRC Error TLP Status Status for Function 5, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_MALF_TLP5\ + (1 << 6) /* Malformed TLP Status Status for Function 5, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_RX_OFLOW5\ + (1 << 5) /* Receiver Overflow Status Status for Function 5, if \ + set, generate pcie_err_attn output when this error is seen.. WC \ + */ +#define PXPCS_TL_FUNC678_STAT_ERR_UNEXP_CPL5\ + (1 << 4) /* Unexpected Completion Status Status for Function 5, \ + if set, generate pcie_err_attn output when this error is seen. WC \ + */ +#define PXPCS_TL_FUNC678_STAT_ERR_MASTER_ABRT5\ + (1 << 3) /* Receive UR Statusfor Function 5. If set, generate \ + pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_CPL_TIMEOUT5\ + (1 << 2) /* Completer Timeout Status Status for Function 5, if \ + set, generate pcie_err_attn output when this error is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_FC_PRTL5\ + (1 << 1) /* Flow Control Protocol Error Status Status for \ + Function 5, if set, generate pcie_err_attn output when this error \ + is seen. WC */ +#define PXPCS_TL_FUNC678_STAT_ERR_PSND_TLP5\ + (1 << 0) /* Poisoned Error Status Status for Function 5, if set, \ + generate pcie_err_attn output when this error is seen.. WC */ + + +#define BAR_USTRORM_INTMEM 0x400000 +#define BAR_CSTRORM_INTMEM 0x410000 +#define BAR_XSTRORM_INTMEM 0x420000 +#define BAR_TSTRORM_INTMEM 0x430000 + +/* for accessing the IGU in case of status block ACK */ +#define BAR_IGU_INTMEM 0x440000 + +#define BAR_DOORBELL_OFFSET 0x800000 + +#define BAR_ME_REGISTER 0x450000 +#define ME_REG_PF_NUM_SHIFT 0 +#define ME_REG_PF_NUM\ + (7L<> 1; + } + + /* split the crc into 8 bits */ + for (i = 0; i < 8; i++) { + C[i] = crc & 1; + crc = crc >> 1; + } + + NewCRC[0] = D[31] ^ D[30] ^ D[28] ^ D[23] ^ D[21] ^ D[19] ^ D[18] ^ + D[16] ^ D[14] ^ D[12] ^ D[8] ^ D[7] ^ D[6] ^ D[0] ^ C[4] ^ + C[6] ^ C[7]; + NewCRC[1] = D[30] ^ D[29] ^ D[28] ^ D[24] ^ D[23] ^ D[22] ^ D[21] ^ + D[20] ^ D[18] ^ D[17] ^ D[16] ^ D[15] ^ D[14] ^ D[13] ^ + D[12] ^ D[9] ^ D[6] ^ D[1] ^ D[0] ^ C[0] ^ C[4] ^ C[5] ^ + C[6]; + NewCRC[2] = D[29] ^ D[28] ^ D[25] ^ D[24] ^ D[22] ^ D[17] ^ D[15] ^ + D[13] ^ D[12] ^ D[10] ^ D[8] ^ D[6] ^ D[2] ^ D[1] ^ D[0] ^ + C[0] ^ C[1] ^ C[4] ^ C[5]; + NewCRC[3] = D[30] ^ D[29] ^ D[26] ^ D[25] ^ D[23] ^ D[18] ^ D[16] ^ + D[14] ^ D[13] ^ D[11] ^ D[9] ^ D[7] ^ D[3] ^ D[2] ^ D[1] ^ + C[1] ^ C[2] ^ C[5] ^ C[6]; + NewCRC[4] = D[31] ^ D[30] ^ D[27] ^ D[26] ^ D[24] ^ D[19] ^ D[17] ^ + D[15] ^ D[14] ^ D[12] ^ D[10] ^ D[8] ^ D[4] ^ D[3] ^ D[2] ^ + C[0] ^ C[2] ^ C[3] ^ C[6] ^ C[7]; + NewCRC[5] = D[31] ^ D[28] ^ D[27] ^ D[25] ^ D[20] ^ D[18] ^ D[16] ^ + D[15] ^ D[13] ^ D[11] ^ D[9] ^ D[5] ^ D[4] ^ D[3] ^ C[1] ^ + C[3] ^ C[4] ^ C[7]; + NewCRC[6] = D[29] ^ D[28] ^ D[26] ^ D[21] ^ D[19] ^ D[17] ^ D[16] ^ + D[14] ^ D[12] ^ D[10] ^ D[6] ^ D[5] ^ D[4] ^ C[2] ^ C[4] ^ + C[5]; + NewCRC[7] = D[30] ^ D[29] ^ D[27] ^ D[22] ^ D[20] ^ D[18] ^ D[17] ^ + D[15] ^ D[13] ^ D[11] ^ D[7] ^ D[6] ^ D[5] ^ C[3] ^ C[5] ^ + C[6]; + + crc_res = 0; + for (i = 0; i < 8; i++) + crc_res |= (NewCRC[i] << i); + + return crc_res; +} + + +#endif /* BNX2X_REG_H */ diff --cc drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c index 805076c54f1b,000000000000..da5a5d9b8aff mode 100644,000000..100644 --- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c +++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c @@@ -1,1418 -1,0 +1,1431 @@@ +/* + * Copyright (c) 2006-2008 Chelsio, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "common.h" +#include "regs.h" +#include "cxgb3_ioctl.h" +#include "cxgb3_ctl_defs.h" +#include "cxgb3_defs.h" +#include "l2t.h" +#include "firmware_exports.h" +#include "cxgb3_offload.h" + +static LIST_HEAD(client_list); +static LIST_HEAD(ofld_dev_list); +static DEFINE_MUTEX(cxgb3_db_lock); + +static DEFINE_RWLOCK(adapter_list_lock); +static LIST_HEAD(adapter_list); + +static const unsigned int MAX_ATIDS = 64 * 1024; +static const unsigned int ATID_BASE = 0x10000; + +static void cxgb_neigh_update(struct neighbour *neigh); +static void cxgb_redirect(struct dst_entry *old, struct dst_entry *new); + +static inline int offload_activated(struct t3cdev *tdev) +{ + const struct adapter *adapter = tdev2adap(tdev); + + return test_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map); +} + +/** + * cxgb3_register_client - register an offload client + * @client: the client + * + * Add the client to the client list, + * and call backs the client for each activated offload device + */ +void cxgb3_register_client(struct cxgb3_client *client) +{ + struct t3cdev *tdev; + + mutex_lock(&cxgb3_db_lock); + list_add_tail(&client->client_list, &client_list); + + if (client->add) { + list_for_each_entry(tdev, &ofld_dev_list, ofld_dev_list) { + if (offload_activated(tdev)) + client->add(tdev); + } + } + mutex_unlock(&cxgb3_db_lock); +} + +EXPORT_SYMBOL(cxgb3_register_client); + +/** + * cxgb3_unregister_client - unregister an offload client + * @client: the client + * + * Remove the client to the client list, + * and call backs the client for each activated offload device. + */ +void cxgb3_unregister_client(struct cxgb3_client *client) +{ + struct t3cdev *tdev; + + mutex_lock(&cxgb3_db_lock); + list_del(&client->client_list); + + if (client->remove) { + list_for_each_entry(tdev, &ofld_dev_list, ofld_dev_list) { + if (offload_activated(tdev)) + client->remove(tdev); + } + } + mutex_unlock(&cxgb3_db_lock); +} + +EXPORT_SYMBOL(cxgb3_unregister_client); + +/** + * cxgb3_add_clients - activate registered clients for an offload device + * @tdev: the offload device + * + * Call backs all registered clients once a offload device is activated + */ +void cxgb3_add_clients(struct t3cdev *tdev) +{ + struct cxgb3_client *client; + + mutex_lock(&cxgb3_db_lock); + list_for_each_entry(client, &client_list, client_list) { + if (client->add) + client->add(tdev); + } + mutex_unlock(&cxgb3_db_lock); +} + +/** + * cxgb3_remove_clients - deactivates registered clients + * for an offload device + * @tdev: the offload device + * + * Call backs all registered clients once a offload device is deactivated + */ +void cxgb3_remove_clients(struct t3cdev *tdev) +{ + struct cxgb3_client *client; + + mutex_lock(&cxgb3_db_lock); + list_for_each_entry(client, &client_list, client_list) { + if (client->remove) + client->remove(tdev); + } + mutex_unlock(&cxgb3_db_lock); +} + +void cxgb3_event_notify(struct t3cdev *tdev, u32 event, u32 port) +{ + struct cxgb3_client *client; + + mutex_lock(&cxgb3_db_lock); + list_for_each_entry(client, &client_list, client_list) { + if (client->event_handler) + client->event_handler(tdev, event, port); + } + mutex_unlock(&cxgb3_db_lock); +} + +static struct net_device *get_iff_from_mac(struct adapter *adapter, + const unsigned char *mac, + unsigned int vlan) +{ + int i; + + for_each_port(adapter, i) { + struct net_device *dev = adapter->port[i]; + + if (!memcmp(dev->dev_addr, mac, ETH_ALEN)) { + if (vlan && vlan != VLAN_VID_MASK) { + rcu_read_lock(); + dev = __vlan_find_dev_deep(dev, vlan); + rcu_read_unlock(); + } else if (netif_is_bond_slave(dev)) { + while (dev->master) + dev = dev->master; + } + return dev; + } + } + return NULL; +} + +static int cxgb_ulp_iscsi_ctl(struct adapter *adapter, unsigned int req, + void *data) +{ + int i; + int ret = 0; + unsigned int val = 0; + struct ulp_iscsi_info *uiip = data; + + switch (req) { + case ULP_ISCSI_GET_PARAMS: + uiip->pdev = adapter->pdev; + uiip->llimit = t3_read_reg(adapter, A_ULPRX_ISCSI_LLIMIT); + uiip->ulimit = t3_read_reg(adapter, A_ULPRX_ISCSI_ULIMIT); + uiip->tagmask = t3_read_reg(adapter, A_ULPRX_ISCSI_TAGMASK); + + val = t3_read_reg(adapter, A_ULPRX_ISCSI_PSZ); + for (i = 0; i < 4; i++, val >>= 8) + uiip->pgsz_factor[i] = val & 0xFF; + + val = t3_read_reg(adapter, A_TP_PARA_REG7); + uiip->max_txsz = + uiip->max_rxsz = min((val >> S_PMMAXXFERLEN0)&M_PMMAXXFERLEN0, + (val >> S_PMMAXXFERLEN1)&M_PMMAXXFERLEN1); + /* + * On tx, the iscsi pdu has to be <= tx page size and has to + * fit into the Tx PM FIFO. + */ + val = min(adapter->params.tp.tx_pg_size, + t3_read_reg(adapter, A_PM1_TX_CFG) >> 17); + uiip->max_txsz = min(val, uiip->max_txsz); + + /* set MaxRxData to 16224 */ + val = t3_read_reg(adapter, A_TP_PARA_REG2); + if ((val >> S_MAXRXDATA) != 0x3f60) { + val &= (M_RXCOALESCESIZE << S_RXCOALESCESIZE); + val |= V_MAXRXDATA(0x3f60); + printk(KERN_INFO + "%s, iscsi set MaxRxData to 16224 (0x%x).\n", + adapter->name, val); + t3_write_reg(adapter, A_TP_PARA_REG2, val); + } + + /* + * on rx, the iscsi pdu has to be < rx page size and the + * the max rx data length programmed in TP + */ + val = min(adapter->params.tp.rx_pg_size, + ((t3_read_reg(adapter, A_TP_PARA_REG2)) >> + S_MAXRXDATA) & M_MAXRXDATA); + uiip->max_rxsz = min(val, uiip->max_rxsz); + break; + case ULP_ISCSI_SET_PARAMS: + t3_write_reg(adapter, A_ULPRX_ISCSI_TAGMASK, uiip->tagmask); + /* program the ddp page sizes */ + for (i = 0; i < 4; i++) + val |= (uiip->pgsz_factor[i] & 0xF) << (8 * i); + if (val && (val != t3_read_reg(adapter, A_ULPRX_ISCSI_PSZ))) { + printk(KERN_INFO + "%s, setting iscsi pgsz 0x%x, %u,%u,%u,%u.\n", + adapter->name, val, uiip->pgsz_factor[0], + uiip->pgsz_factor[1], uiip->pgsz_factor[2], + uiip->pgsz_factor[3]); + t3_write_reg(adapter, A_ULPRX_ISCSI_PSZ, val); + } + break; + default: + ret = -EOPNOTSUPP; + } + return ret; +} + +/* Response queue used for RDMA events. */ +#define ASYNC_NOTIF_RSPQ 0 + +static int cxgb_rdma_ctl(struct adapter *adapter, unsigned int req, void *data) +{ + int ret = 0; + + switch (req) { + case RDMA_GET_PARAMS: { + struct rdma_info *rdma = data; + struct pci_dev *pdev = adapter->pdev; + + rdma->udbell_physbase = pci_resource_start(pdev, 2); + rdma->udbell_len = pci_resource_len(pdev, 2); + rdma->tpt_base = + t3_read_reg(adapter, A_ULPTX_TPT_LLIMIT); + rdma->tpt_top = t3_read_reg(adapter, A_ULPTX_TPT_ULIMIT); + rdma->pbl_base = + t3_read_reg(adapter, A_ULPTX_PBL_LLIMIT); + rdma->pbl_top = t3_read_reg(adapter, A_ULPTX_PBL_ULIMIT); + rdma->rqt_base = t3_read_reg(adapter, A_ULPRX_RQ_LLIMIT); + rdma->rqt_top = t3_read_reg(adapter, A_ULPRX_RQ_ULIMIT); + rdma->kdb_addr = adapter->regs + A_SG_KDOORBELL; + rdma->pdev = pdev; + break; + } + case RDMA_CQ_OP:{ + unsigned long flags; + struct rdma_cq_op *rdma = data; + + /* may be called in any context */ + spin_lock_irqsave(&adapter->sge.reg_lock, flags); + ret = t3_sge_cqcntxt_op(adapter, rdma->id, rdma->op, + rdma->credits); + spin_unlock_irqrestore(&adapter->sge.reg_lock, flags); + break; + } + case RDMA_GET_MEM:{ + struct ch_mem_range *t = data; + struct mc7 *mem; + + if ((t->addr & 7) || (t->len & 7)) + return -EINVAL; + if (t->mem_id == MEM_CM) + mem = &adapter->cm; + else if (t->mem_id == MEM_PMRX) + mem = &adapter->pmrx; + else if (t->mem_id == MEM_PMTX) + mem = &adapter->pmtx; + else + return -EINVAL; + + ret = + t3_mc7_bd_read(mem, t->addr / 8, t->len / 8, + (u64 *) t->buf); + if (ret) + return ret; + break; + } + case RDMA_CQ_SETUP:{ + struct rdma_cq_setup *rdma = data; + + spin_lock_irq(&adapter->sge.reg_lock); + ret = + t3_sge_init_cqcntxt(adapter, rdma->id, + rdma->base_addr, rdma->size, + ASYNC_NOTIF_RSPQ, + rdma->ovfl_mode, rdma->credits, + rdma->credit_thres); + spin_unlock_irq(&adapter->sge.reg_lock); + break; + } + case RDMA_CQ_DISABLE: + spin_lock_irq(&adapter->sge.reg_lock); + ret = t3_sge_disable_cqcntxt(adapter, *(unsigned int *)data); + spin_unlock_irq(&adapter->sge.reg_lock); + break; + case RDMA_CTRL_QP_SETUP:{ + struct rdma_ctrlqp_setup *rdma = data; + + spin_lock_irq(&adapter->sge.reg_lock); + ret = t3_sge_init_ecntxt(adapter, FW_RI_SGEEC_START, 0, + SGE_CNTXT_RDMA, + ASYNC_NOTIF_RSPQ, + rdma->base_addr, rdma->size, + FW_RI_TID_START, 1, 0); + spin_unlock_irq(&adapter->sge.reg_lock); + break; + } + case RDMA_GET_MIB: { + spin_lock(&adapter->stats_lock); + t3_tp_get_mib_stats(adapter, (struct tp_mib_stats *)data); + spin_unlock(&adapter->stats_lock); + break; + } + default: + ret = -EOPNOTSUPP; + } + return ret; +} + +static int cxgb_offload_ctl(struct t3cdev *tdev, unsigned int req, void *data) +{ + struct adapter *adapter = tdev2adap(tdev); + struct tid_range *tid; + struct mtutab *mtup; + struct iff_mac *iffmacp; + struct ddp_params *ddpp; + struct adap_ports *ports; + struct ofld_page_info *rx_page_info; + struct tp_params *tp = &adapter->params.tp; + int i; + + switch (req) { + case GET_MAX_OUTSTANDING_WR: + *(unsigned int *)data = FW_WR_NUM; + break; + case GET_WR_LEN: + *(unsigned int *)data = WR_FLITS; + break; + case GET_TX_MAX_CHUNK: + *(unsigned int *)data = 1 << 20; /* 1MB */ + break; + case GET_TID_RANGE: + tid = data; + tid->num = t3_mc5_size(&adapter->mc5) - + adapter->params.mc5.nroutes - + adapter->params.mc5.nfilters - adapter->params.mc5.nservers; + tid->base = 0; + break; + case GET_STID_RANGE: + tid = data; + tid->num = adapter->params.mc5.nservers; + tid->base = t3_mc5_size(&adapter->mc5) - tid->num - + adapter->params.mc5.nfilters - adapter->params.mc5.nroutes; + break; + case GET_L2T_CAPACITY: + *(unsigned int *)data = 2048; + break; + case GET_MTUS: + mtup = data; + mtup->size = NMTUS; + mtup->mtus = adapter->params.mtus; + break; + case GET_IFF_FROM_MAC: + iffmacp = data; + iffmacp->dev = get_iff_from_mac(adapter, iffmacp->mac_addr, + iffmacp->vlan_tag & + VLAN_VID_MASK); + break; + case GET_DDP_PARAMS: + ddpp = data; + ddpp->llimit = t3_read_reg(adapter, A_ULPRX_TDDP_LLIMIT); + ddpp->ulimit = t3_read_reg(adapter, A_ULPRX_TDDP_ULIMIT); + ddpp->tag_mask = t3_read_reg(adapter, A_ULPRX_TDDP_TAGMASK); + break; + case GET_PORTS: + ports = data; + ports->nports = adapter->params.nports; + for_each_port(adapter, i) + ports->lldevs[i] = adapter->port[i]; + break; + case ULP_ISCSI_GET_PARAMS: + case ULP_ISCSI_SET_PARAMS: + if (!offload_running(adapter)) + return -EAGAIN; + return cxgb_ulp_iscsi_ctl(adapter, req, data); + case RDMA_GET_PARAMS: + case RDMA_CQ_OP: + case RDMA_CQ_SETUP: + case RDMA_CQ_DISABLE: + case RDMA_CTRL_QP_SETUP: + case RDMA_GET_MEM: + case RDMA_GET_MIB: + if (!offload_running(adapter)) + return -EAGAIN; + return cxgb_rdma_ctl(adapter, req, data); + case GET_RX_PAGE_INFO: + rx_page_info = data; + rx_page_info->page_size = tp->rx_pg_size; + rx_page_info->num = tp->rx_num_pgs; + break; + case GET_ISCSI_IPV4ADDR: { + struct iscsi_ipv4addr *p = data; + struct port_info *pi = netdev_priv(p->dev); + p->ipv4addr = pi->iscsi_ipv4addr; + break; + } + case GET_EMBEDDED_INFO: { + struct ch_embedded_info *e = data; + + spin_lock(&adapter->stats_lock); + t3_get_fw_version(adapter, &e->fw_vers); + t3_get_tp_version(adapter, &e->tp_vers); + spin_unlock(&adapter->stats_lock); + break; + } + default: + return -EOPNOTSUPP; + } + return 0; +} + +/* + * Dummy handler for Rx offload packets in case we get an offload packet before + * proper processing is setup. This complains and drops the packet as it isn't + * normal to get offload packets at this stage. + */ +static int rx_offload_blackhole(struct t3cdev *dev, struct sk_buff **skbs, + int n) +{ + while (n--) + dev_kfree_skb_any(skbs[n]); + return 0; +} + +static void dummy_neigh_update(struct t3cdev *dev, struct neighbour *neigh) +{ +} + +void cxgb3_set_dummy_ops(struct t3cdev *dev) +{ + dev->recv = rx_offload_blackhole; + dev->neigh_update = dummy_neigh_update; +} + +/* + * Free an active-open TID. + */ +void *cxgb3_free_atid(struct t3cdev *tdev, int atid) +{ + struct tid_info *t = &(T3C_DATA(tdev))->tid_maps; + union active_open_entry *p = atid2entry(t, atid); + void *ctx = p->t3c_tid.ctx; + + spin_lock_bh(&t->atid_lock); + p->next = t->afree; + t->afree = p; + t->atids_in_use--; + spin_unlock_bh(&t->atid_lock); + + return ctx; +} + +EXPORT_SYMBOL(cxgb3_free_atid); + +/* + * Free a server TID and return it to the free pool. + */ +void cxgb3_free_stid(struct t3cdev *tdev, int stid) +{ + struct tid_info *t = &(T3C_DATA(tdev))->tid_maps; + union listen_entry *p = stid2entry(t, stid); + + spin_lock_bh(&t->stid_lock); + p->next = t->sfree; + t->sfree = p; + t->stids_in_use--; + spin_unlock_bh(&t->stid_lock); +} + +EXPORT_SYMBOL(cxgb3_free_stid); + +void cxgb3_insert_tid(struct t3cdev *tdev, struct cxgb3_client *client, + void *ctx, unsigned int tid) +{ + struct tid_info *t = &(T3C_DATA(tdev))->tid_maps; + + t->tid_tab[tid].client = client; + t->tid_tab[tid].ctx = ctx; + atomic_inc(&t->tids_in_use); +} + +EXPORT_SYMBOL(cxgb3_insert_tid); + +/* + * Populate a TID_RELEASE WR. The skb must be already propely sized. + */ +static inline void mk_tid_release(struct sk_buff *skb, unsigned int tid) +{ + struct cpl_tid_release *req; + + skb->priority = CPL_PRIORITY_SETUP; + req = (struct cpl_tid_release *)__skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_TID_RELEASE, tid)); +} + +static void t3_process_tid_release_list(struct work_struct *work) +{ + struct t3c_data *td = container_of(work, struct t3c_data, + tid_release_task); + struct sk_buff *skb; + struct t3cdev *tdev = td->dev; + + + spin_lock_bh(&td->tid_release_lock); + while (td->tid_release_list) { + struct t3c_tid_entry *p = td->tid_release_list; + + td->tid_release_list = p->ctx; + spin_unlock_bh(&td->tid_release_lock); + + skb = alloc_skb(sizeof(struct cpl_tid_release), + GFP_KERNEL); + if (!skb) + skb = td->nofail_skb; + if (!skb) { + spin_lock_bh(&td->tid_release_lock); + p->ctx = (void *)td->tid_release_list; + td->tid_release_list = (struct t3c_tid_entry *)p; + break; + } + mk_tid_release(skb, p - td->tid_maps.tid_tab); + cxgb3_ofld_send(tdev, skb); + p->ctx = NULL; + if (skb == td->nofail_skb) + td->nofail_skb = + alloc_skb(sizeof(struct cpl_tid_release), + GFP_KERNEL); + spin_lock_bh(&td->tid_release_lock); + } + td->release_list_incomplete = (td->tid_release_list == NULL) ? 0 : 1; + spin_unlock_bh(&td->tid_release_lock); + + if (!td->nofail_skb) + td->nofail_skb = + alloc_skb(sizeof(struct cpl_tid_release), + GFP_KERNEL); +} + +/* use ctx as a next pointer in the tid release list */ +void cxgb3_queue_tid_release(struct t3cdev *tdev, unsigned int tid) +{ + struct t3c_data *td = T3C_DATA(tdev); + struct t3c_tid_entry *p = &td->tid_maps.tid_tab[tid]; + + spin_lock_bh(&td->tid_release_lock); + p->ctx = (void *)td->tid_release_list; + p->client = NULL; + td->tid_release_list = p; + if (!p->ctx || td->release_list_incomplete) + schedule_work(&td->tid_release_task); + spin_unlock_bh(&td->tid_release_lock); +} + +EXPORT_SYMBOL(cxgb3_queue_tid_release); + +/* + * Remove a tid from the TID table. A client may defer processing its last + * CPL message if it is locked at the time it arrives, and while the message + * sits in the client's backlog the TID may be reused for another connection. + * To handle this we atomically switch the TID association if it still points + * to the original client context. + */ +void cxgb3_remove_tid(struct t3cdev *tdev, void *ctx, unsigned int tid) +{ + struct tid_info *t = &(T3C_DATA(tdev))->tid_maps; + + BUG_ON(tid >= t->ntids); + if (tdev->type == T3A) + (void)cmpxchg(&t->tid_tab[tid].ctx, ctx, NULL); + else { + struct sk_buff *skb; + + skb = alloc_skb(sizeof(struct cpl_tid_release), GFP_ATOMIC); + if (likely(skb)) { + mk_tid_release(skb, tid); + cxgb3_ofld_send(tdev, skb); + t->tid_tab[tid].ctx = NULL; + } else + cxgb3_queue_tid_release(tdev, tid); + } + atomic_dec(&t->tids_in_use); +} + +EXPORT_SYMBOL(cxgb3_remove_tid); + +int cxgb3_alloc_atid(struct t3cdev *tdev, struct cxgb3_client *client, + void *ctx) +{ + int atid = -1; + struct tid_info *t = &(T3C_DATA(tdev))->tid_maps; + + spin_lock_bh(&t->atid_lock); + if (t->afree && + t->atids_in_use + atomic_read(&t->tids_in_use) + MC5_MIN_TIDS <= + t->ntids) { + union active_open_entry *p = t->afree; + + atid = (p - t->atid_tab) + t->atid_base; + t->afree = p->next; + p->t3c_tid.ctx = ctx; + p->t3c_tid.client = client; + t->atids_in_use++; + } + spin_unlock_bh(&t->atid_lock); + return atid; +} + +EXPORT_SYMBOL(cxgb3_alloc_atid); + +int cxgb3_alloc_stid(struct t3cdev *tdev, struct cxgb3_client *client, + void *ctx) +{ + int stid = -1; + struct tid_info *t = &(T3C_DATA(tdev))->tid_maps; + + spin_lock_bh(&t->stid_lock); + if (t->sfree) { + union listen_entry *p = t->sfree; + + stid = (p - t->stid_tab) + t->stid_base; + t->sfree = p->next; + p->t3c_tid.ctx = ctx; + p->t3c_tid.client = client; + t->stids_in_use++; + } + spin_unlock_bh(&t->stid_lock); + return stid; +} + +EXPORT_SYMBOL(cxgb3_alloc_stid); + +/* Get the t3cdev associated with a net_device */ +struct t3cdev *dev2t3cdev(struct net_device *dev) +{ + const struct port_info *pi = netdev_priv(dev); + + return (struct t3cdev *)pi->adapter; +} + +EXPORT_SYMBOL(dev2t3cdev); + +static int do_smt_write_rpl(struct t3cdev *dev, struct sk_buff *skb) +{ + struct cpl_smt_write_rpl *rpl = cplhdr(skb); + + if (rpl->status != CPL_ERR_NONE) + printk(KERN_ERR + "Unexpected SMT_WRITE_RPL status %u for entry %u\n", + rpl->status, GET_TID(rpl)); + + return CPL_RET_BUF_DONE; +} + +static int do_l2t_write_rpl(struct t3cdev *dev, struct sk_buff *skb) +{ + struct cpl_l2t_write_rpl *rpl = cplhdr(skb); + + if (rpl->status != CPL_ERR_NONE) + printk(KERN_ERR + "Unexpected L2T_WRITE_RPL status %u for entry %u\n", + rpl->status, GET_TID(rpl)); + + return CPL_RET_BUF_DONE; +} + +static int do_rte_write_rpl(struct t3cdev *dev, struct sk_buff *skb) +{ + struct cpl_rte_write_rpl *rpl = cplhdr(skb); + + if (rpl->status != CPL_ERR_NONE) + printk(KERN_ERR + "Unexpected RTE_WRITE_RPL status %u for entry %u\n", + rpl->status, GET_TID(rpl)); + + return CPL_RET_BUF_DONE; +} + +static int do_act_open_rpl(struct t3cdev *dev, struct sk_buff *skb) +{ + struct cpl_act_open_rpl *rpl = cplhdr(skb); + unsigned int atid = G_TID(ntohl(rpl->atid)); + struct t3c_tid_entry *t3c_tid; + + t3c_tid = lookup_atid(&(T3C_DATA(dev))->tid_maps, atid); + if (t3c_tid && t3c_tid->ctx && t3c_tid->client && + t3c_tid->client->handlers && + t3c_tid->client->handlers[CPL_ACT_OPEN_RPL]) { + return t3c_tid->client->handlers[CPL_ACT_OPEN_RPL] (dev, skb, + t3c_tid-> + ctx); + } else { + printk(KERN_ERR "%s: received clientless CPL command 0x%x\n", + dev->name, CPL_ACT_OPEN_RPL); + return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG; + } +} + +static int do_stid_rpl(struct t3cdev *dev, struct sk_buff *skb) +{ + union opcode_tid *p = cplhdr(skb); + unsigned int stid = G_TID(ntohl(p->opcode_tid)); + struct t3c_tid_entry *t3c_tid; + + t3c_tid = lookup_stid(&(T3C_DATA(dev))->tid_maps, stid); + if (t3c_tid && t3c_tid->ctx && t3c_tid->client->handlers && + t3c_tid->client->handlers[p->opcode]) { + return t3c_tid->client->handlers[p->opcode] (dev, skb, + t3c_tid->ctx); + } else { + printk(KERN_ERR "%s: received clientless CPL command 0x%x\n", + dev->name, p->opcode); + return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG; + } +} + +static int do_hwtid_rpl(struct t3cdev *dev, struct sk_buff *skb) +{ + union opcode_tid *p = cplhdr(skb); + unsigned int hwtid = G_TID(ntohl(p->opcode_tid)); + struct t3c_tid_entry *t3c_tid; + + t3c_tid = lookup_tid(&(T3C_DATA(dev))->tid_maps, hwtid); + if (t3c_tid && t3c_tid->ctx && t3c_tid->client->handlers && + t3c_tid->client->handlers[p->opcode]) { + return t3c_tid->client->handlers[p->opcode] + (dev, skb, t3c_tid->ctx); + } else { + printk(KERN_ERR "%s: received clientless CPL command 0x%x\n", + dev->name, p->opcode); + return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG; + } +} + +static int do_cr(struct t3cdev *dev, struct sk_buff *skb) +{ + struct cpl_pass_accept_req *req = cplhdr(skb); + unsigned int stid = G_PASS_OPEN_TID(ntohl(req->tos_tid)); + struct tid_info *t = &(T3C_DATA(dev))->tid_maps; + struct t3c_tid_entry *t3c_tid; + unsigned int tid = GET_TID(req); + + if (unlikely(tid >= t->ntids)) { + printk("%s: passive open TID %u too large\n", + dev->name, tid); + t3_fatal_err(tdev2adap(dev)); + return CPL_RET_BUF_DONE; + } + + t3c_tid = lookup_stid(t, stid); + if (t3c_tid && t3c_tid->ctx && t3c_tid->client->handlers && + t3c_tid->client->handlers[CPL_PASS_ACCEPT_REQ]) { + return t3c_tid->client->handlers[CPL_PASS_ACCEPT_REQ] + (dev, skb, t3c_tid->ctx); + } else { + printk(KERN_ERR "%s: received clientless CPL command 0x%x\n", + dev->name, CPL_PASS_ACCEPT_REQ); + return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG; + } +} + +/* + * Returns an sk_buff for a reply CPL message of size len. If the input + * sk_buff has no other users it is trimmed and reused, otherwise a new buffer + * is allocated. The input skb must be of size at least len. Note that this + * operation does not destroy the original skb data even if it decides to reuse + * the buffer. + */ +static struct sk_buff *cxgb3_get_cpl_reply_skb(struct sk_buff *skb, size_t len, + gfp_t gfp) +{ + if (likely(!skb_cloned(skb))) { + BUG_ON(skb->len < len); + __skb_trim(skb, len); + skb_get(skb); + } else { + skb = alloc_skb(len, gfp); + if (skb) + __skb_put(skb, len); + } + return skb; +} + +static int do_abort_req_rss(struct t3cdev *dev, struct sk_buff *skb) +{ + union opcode_tid *p = cplhdr(skb); + unsigned int hwtid = G_TID(ntohl(p->opcode_tid)); + struct t3c_tid_entry *t3c_tid; + + t3c_tid = lookup_tid(&(T3C_DATA(dev))->tid_maps, hwtid); + if (t3c_tid && t3c_tid->ctx && t3c_tid->client->handlers && + t3c_tid->client->handlers[p->opcode]) { + return t3c_tid->client->handlers[p->opcode] + (dev, skb, t3c_tid->ctx); + } else { + struct cpl_abort_req_rss *req = cplhdr(skb); + struct cpl_abort_rpl *rpl; + struct sk_buff *reply_skb; + unsigned int tid = GET_TID(req); + u8 cmd = req->status; + + if (req->status == CPL_ERR_RTX_NEG_ADVICE || + req->status == CPL_ERR_PERSIST_NEG_ADVICE) + goto out; + + reply_skb = cxgb3_get_cpl_reply_skb(skb, + sizeof(struct + cpl_abort_rpl), + GFP_ATOMIC); + + if (!reply_skb) { + printk("do_abort_req_rss: couldn't get skb!\n"); + goto out; + } + reply_skb->priority = CPL_PRIORITY_DATA; + __skb_put(reply_skb, sizeof(struct cpl_abort_rpl)); + rpl = cplhdr(reply_skb); + rpl->wr.wr_hi = + htonl(V_WR_OP(FW_WROPCODE_OFLD_HOST_ABORT_CON_RPL)); + rpl->wr.wr_lo = htonl(V_WR_TID(tid)); + OPCODE_TID(rpl) = htonl(MK_OPCODE_TID(CPL_ABORT_RPL, tid)); + rpl->cmd = cmd; + cxgb3_ofld_send(dev, reply_skb); +out: + return CPL_RET_BUF_DONE; + } +} + +static int do_act_establish(struct t3cdev *dev, struct sk_buff *skb) +{ + struct cpl_act_establish *req = cplhdr(skb); + unsigned int atid = G_PASS_OPEN_TID(ntohl(req->tos_tid)); + struct tid_info *t = &(T3C_DATA(dev))->tid_maps; + struct t3c_tid_entry *t3c_tid; + unsigned int tid = GET_TID(req); + + if (unlikely(tid >= t->ntids)) { + printk("%s: active establish TID %u too large\n", + dev->name, tid); + t3_fatal_err(tdev2adap(dev)); + return CPL_RET_BUF_DONE; + } + + t3c_tid = lookup_atid(t, atid); + if (t3c_tid && t3c_tid->ctx && t3c_tid->client->handlers && + t3c_tid->client->handlers[CPL_ACT_ESTABLISH]) { + return t3c_tid->client->handlers[CPL_ACT_ESTABLISH] + (dev, skb, t3c_tid->ctx); + } else { + printk(KERN_ERR "%s: received clientless CPL command 0x%x\n", + dev->name, CPL_ACT_ESTABLISH); + return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG; + } +} + +static int do_trace(struct t3cdev *dev, struct sk_buff *skb) +{ + struct cpl_trace_pkt *p = cplhdr(skb); + + skb->protocol = htons(0xffff); + skb->dev = dev->lldev; + skb_pull(skb, sizeof(*p)); + skb_reset_mac_header(skb); + netif_receive_skb(skb); + return 0; +} + +/* + * That skb would better have come from process_responses() where we abuse + * ->priority and ->csum to carry our data. NB: if we get to per-arch + * ->csum, the things might get really interesting here. + */ + +static inline u32 get_hwtid(struct sk_buff *skb) +{ + return ntohl((__force __be32)skb->priority) >> 8 & 0xfffff; +} + +static inline u32 get_opcode(struct sk_buff *skb) +{ + return G_OPCODE(ntohl((__force __be32)skb->csum)); +} + +static int do_term(struct t3cdev *dev, struct sk_buff *skb) +{ + unsigned int hwtid = get_hwtid(skb); + unsigned int opcode = get_opcode(skb); + struct t3c_tid_entry *t3c_tid; + + t3c_tid = lookup_tid(&(T3C_DATA(dev))->tid_maps, hwtid); + if (t3c_tid && t3c_tid->ctx && t3c_tid->client->handlers && + t3c_tid->client->handlers[opcode]) { + return t3c_tid->client->handlers[opcode] (dev, skb, + t3c_tid->ctx); + } else { + printk(KERN_ERR "%s: received clientless CPL command 0x%x\n", + dev->name, opcode); + return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG; + } +} + +static int nb_callback(struct notifier_block *self, unsigned long event, + void *ctx) +{ + switch (event) { + case (NETEVENT_NEIGH_UPDATE):{ + cxgb_neigh_update((struct neighbour *)ctx); + break; + } + case (NETEVENT_REDIRECT):{ + struct netevent_redirect *nr = ctx; + cxgb_redirect(nr->old, nr->new); + cxgb_neigh_update(dst_get_neighbour(nr->new)); + break; + } + default: + break; + } + return 0; +} + +static struct notifier_block nb = { + .notifier_call = nb_callback +}; + +/* + * Process a received packet with an unknown/unexpected CPL opcode. + */ +static int do_bad_cpl(struct t3cdev *dev, struct sk_buff *skb) +{ + printk(KERN_ERR "%s: received bad CPL command 0x%x\n", dev->name, + *skb->data); + return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG; +} + +/* + * Handlers for each CPL opcode + */ +static cpl_handler_func cpl_handlers[NUM_CPL_CMDS]; + +/* + * Add a new handler to the CPL dispatch table. A NULL handler may be supplied + * to unregister an existing handler. + */ +void t3_register_cpl_handler(unsigned int opcode, cpl_handler_func h) +{ + if (opcode < NUM_CPL_CMDS) + cpl_handlers[opcode] = h ? h : do_bad_cpl; + else + printk(KERN_ERR "T3C: handler registration for " + "opcode %x failed\n", opcode); +} + +EXPORT_SYMBOL(t3_register_cpl_handler); + +/* + * T3CDEV's receive method. + */ +static int process_rx(struct t3cdev *dev, struct sk_buff **skbs, int n) +{ + while (n--) { + struct sk_buff *skb = *skbs++; + unsigned int opcode = get_opcode(skb); + int ret = cpl_handlers[opcode] (dev, skb); + +#if VALIDATE_TID + if (ret & CPL_RET_UNKNOWN_TID) { + union opcode_tid *p = cplhdr(skb); + + printk(KERN_ERR "%s: CPL message (opcode %u) had " + "unknown TID %u\n", dev->name, opcode, + G_TID(ntohl(p->opcode_tid))); + } +#endif + if (ret & CPL_RET_BUF_DONE) + kfree_skb(skb); + } + return 0; +} + +/* + * Sends an sk_buff to a T3C driver after dealing with any active network taps. + */ +int cxgb3_ofld_send(struct t3cdev *dev, struct sk_buff *skb) +{ + int r; + + local_bh_disable(); + r = dev->send(dev, skb); + local_bh_enable(); + return r; +} + +EXPORT_SYMBOL(cxgb3_ofld_send); + +static int is_offloading(struct net_device *dev) +{ + struct adapter *adapter; + int i; + + read_lock_bh(&adapter_list_lock); + list_for_each_entry(adapter, &adapter_list, adapter_list) { + for_each_port(adapter, i) { + if (dev == adapter->port[i]) { + read_unlock_bh(&adapter_list_lock); + return 1; + } + } + } + read_unlock_bh(&adapter_list_lock); + return 0; +} + +static void cxgb_neigh_update(struct neighbour *neigh) +{ + struct net_device *dev = neigh->dev; + + if (dev && (is_offloading(dev))) { + struct t3cdev *tdev = dev2t3cdev(dev); + + BUG_ON(!tdev); + t3_l2t_update(tdev, neigh); + } +} + +static void set_l2t_ix(struct t3cdev *tdev, u32 tid, struct l2t_entry *e) +{ + struct sk_buff *skb; + struct cpl_set_tcb_field *req; + + skb = alloc_skb(sizeof(*req), GFP_ATOMIC); + if (!skb) { + printk(KERN_ERR "%s: cannot allocate skb!\n", __func__); + return; + } + skb->priority = CPL_PRIORITY_CONTROL; + req = (struct cpl_set_tcb_field *)skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, tid)); + req->reply = 0; + req->cpu_idx = 0; + req->word = htons(W_TCB_L2T_IX); + req->mask = cpu_to_be64(V_TCB_L2T_IX(M_TCB_L2T_IX)); + req->val = cpu_to_be64(V_TCB_L2T_IX(e->idx)); + tdev->send(tdev, skb); +} + +static void cxgb_redirect(struct dst_entry *old, struct dst_entry *new) +{ + struct net_device *olddev, *newdev; + struct tid_info *ti; + struct t3cdev *tdev; + u32 tid; + int update_tcb; + struct l2t_entry *e; + struct t3c_tid_entry *te; + + olddev = dst_get_neighbour(old)->dev; + newdev = dst_get_neighbour(new)->dev; + if (!is_offloading(olddev)) + return; + if (!is_offloading(newdev)) { + printk(KERN_WARNING "%s: Redirect to non-offload " + "device ignored.\n", __func__); + return; + } + tdev = dev2t3cdev(olddev); + BUG_ON(!tdev); + if (tdev != dev2t3cdev(newdev)) { + printk(KERN_WARNING "%s: Redirect to different " + "offload device ignored.\n", __func__); + return; + } + + /* Add new L2T entry */ + e = t3_l2t_get(tdev, dst_get_neighbour(new), newdev); + if (!e) { + printk(KERN_ERR "%s: couldn't allocate new l2t entry!\n", + __func__); + return; + } + + /* Walk tid table and notify clients of dst change. */ + ti = &(T3C_DATA(tdev))->tid_maps; + for (tid = 0; tid < ti->ntids; tid++) { + te = lookup_tid(ti, tid); + BUG_ON(!te); + if (te && te->ctx && te->client && te->client->redirect) { + update_tcb = te->client->redirect(te->ctx, old, new, e); + if (update_tcb) { ++ rcu_read_lock(); + l2t_hold(L2DATA(tdev), e); ++ rcu_read_unlock(); + set_l2t_ix(tdev, tid, e); + } + } + } - l2t_release(L2DATA(tdev), e); ++ l2t_release(tdev, e); +} + +/* + * Allocate a chunk of memory using kmalloc or, if that fails, vmalloc. + * The allocated memory is cleared. + */ +void *cxgb_alloc_mem(unsigned long size) +{ + void *p = kzalloc(size, GFP_KERNEL); + + if (!p) + p = vzalloc(size); + return p; +} + +/* + * Free memory allocated through t3_alloc_mem(). + */ +void cxgb_free_mem(void *addr) +{ + if (is_vmalloc_addr(addr)) + vfree(addr); + else + kfree(addr); +} + +/* + * Allocate and initialize the TID tables. Returns 0 on success. + */ +static int init_tid_tabs(struct tid_info *t, unsigned int ntids, + unsigned int natids, unsigned int nstids, + unsigned int atid_base, unsigned int stid_base) +{ + unsigned long size = ntids * sizeof(*t->tid_tab) + + natids * sizeof(*t->atid_tab) + nstids * sizeof(*t->stid_tab); + + t->tid_tab = cxgb_alloc_mem(size); + if (!t->tid_tab) + return -ENOMEM; + + t->stid_tab = (union listen_entry *)&t->tid_tab[ntids]; + t->atid_tab = (union active_open_entry *)&t->stid_tab[nstids]; + t->ntids = ntids; + t->nstids = nstids; + t->stid_base = stid_base; + t->sfree = NULL; + t->natids = natids; + t->atid_base = atid_base; + t->afree = NULL; + t->stids_in_use = t->atids_in_use = 0; + atomic_set(&t->tids_in_use, 0); + spin_lock_init(&t->stid_lock); + spin_lock_init(&t->atid_lock); + + /* + * Setup the free lists for stid_tab and atid_tab. + */ + if (nstids) { + while (--nstids) + t->stid_tab[nstids - 1].next = &t->stid_tab[nstids]; + t->sfree = t->stid_tab; + } + if (natids) { + while (--natids) + t->atid_tab[natids - 1].next = &t->atid_tab[natids]; + t->afree = t->atid_tab; + } + return 0; +} + +static void free_tid_maps(struct tid_info *t) +{ + cxgb_free_mem(t->tid_tab); +} + +static inline void add_adapter(struct adapter *adap) +{ + write_lock_bh(&adapter_list_lock); + list_add_tail(&adap->adapter_list, &adapter_list); + write_unlock_bh(&adapter_list_lock); +} + +static inline void remove_adapter(struct adapter *adap) +{ + write_lock_bh(&adapter_list_lock); + list_del(&adap->adapter_list); + write_unlock_bh(&adapter_list_lock); +} + +int cxgb3_offload_activate(struct adapter *adapter) +{ + struct t3cdev *dev = &adapter->tdev; + int natids, err; + struct t3c_data *t; + struct tid_range stid_range, tid_range; + struct mtutab mtutab; + unsigned int l2t_capacity; + + t = kzalloc(sizeof(*t), GFP_KERNEL); + if (!t) + return -ENOMEM; + + err = -EOPNOTSUPP; + if (dev->ctl(dev, GET_TX_MAX_CHUNK, &t->tx_max_chunk) < 0 || + dev->ctl(dev, GET_MAX_OUTSTANDING_WR, &t->max_wrs) < 0 || + dev->ctl(dev, GET_L2T_CAPACITY, &l2t_capacity) < 0 || + dev->ctl(dev, GET_MTUS, &mtutab) < 0 || + dev->ctl(dev, GET_TID_RANGE, &tid_range) < 0 || + dev->ctl(dev, GET_STID_RANGE, &stid_range) < 0) + goto out_free; + + err = -ENOMEM; - L2DATA(dev) = t3_init_l2t(l2t_capacity); ++ RCU_INIT_POINTER(dev->l2opt, t3_init_l2t(l2t_capacity)); + if (!L2DATA(dev)) + goto out_free; + + natids = min(tid_range.num / 2, MAX_ATIDS); + err = init_tid_tabs(&t->tid_maps, tid_range.num, natids, + stid_range.num, ATID_BASE, stid_range.base); + if (err) + goto out_free_l2t; + + t->mtus = mtutab.mtus; + t->nmtus = mtutab.size; + + INIT_WORK(&t->tid_release_task, t3_process_tid_release_list); + spin_lock_init(&t->tid_release_lock); + INIT_LIST_HEAD(&t->list_node); + t->dev = dev; + + T3C_DATA(dev) = t; + dev->recv = process_rx; + dev->neigh_update = t3_l2t_update; + + /* Register netevent handler once */ + if (list_empty(&adapter_list)) + register_netevent_notifier(&nb); + + t->nofail_skb = alloc_skb(sizeof(struct cpl_tid_release), GFP_KERNEL); + t->release_list_incomplete = 0; + + add_adapter(adapter); + return 0; + +out_free_l2t: + t3_free_l2t(L2DATA(dev)); - L2DATA(dev) = NULL; ++ rcu_assign_pointer(dev->l2opt, NULL); +out_free: + kfree(t); + return err; +} + ++static void clean_l2_data(struct rcu_head *head) ++{ ++ struct l2t_data *d = container_of(head, struct l2t_data, rcu_head); ++ t3_free_l2t(d); ++} ++ ++ +void cxgb3_offload_deactivate(struct adapter *adapter) +{ + struct t3cdev *tdev = &adapter->tdev; + struct t3c_data *t = T3C_DATA(tdev); ++ struct l2t_data *d; + + remove_adapter(adapter); + if (list_empty(&adapter_list)) + unregister_netevent_notifier(&nb); + + free_tid_maps(&t->tid_maps); + T3C_DATA(tdev) = NULL; - t3_free_l2t(L2DATA(tdev)); - L2DATA(tdev) = NULL; ++ rcu_read_lock(); ++ d = L2DATA(tdev); ++ rcu_read_unlock(); ++ rcu_assign_pointer(tdev->l2opt, NULL); ++ call_rcu(&d->rcu_head, clean_l2_data); + if (t->nofail_skb) + kfree_skb(t->nofail_skb); + kfree(t); +} + +static inline void register_tdev(struct t3cdev *tdev) +{ + static int unit; + + mutex_lock(&cxgb3_db_lock); + snprintf(tdev->name, sizeof(tdev->name), "ofld_dev%d", unit++); + list_add_tail(&tdev->ofld_dev_list, &ofld_dev_list); + mutex_unlock(&cxgb3_db_lock); +} + +static inline void unregister_tdev(struct t3cdev *tdev) +{ + mutex_lock(&cxgb3_db_lock); + list_del(&tdev->ofld_dev_list); + mutex_unlock(&cxgb3_db_lock); +} + +static inline int adap2type(struct adapter *adapter) +{ + int type = 0; + + switch (adapter->params.rev) { + case T3_REV_A: + type = T3A; + break; + case T3_REV_B: + case T3_REV_B2: + type = T3B; + break; + case T3_REV_C: + type = T3C; + break; + } + return type; +} + +void __devinit cxgb3_adapter_ofld(struct adapter *adapter) +{ + struct t3cdev *tdev = &adapter->tdev; + + INIT_LIST_HEAD(&tdev->ofld_dev_list); + + cxgb3_set_dummy_ops(tdev); + tdev->send = t3_offload_tx; + tdev->ctl = cxgb_offload_ctl; + tdev->type = adap2type(adapter); + + register_tdev(tdev); +} + +void __devexit cxgb3_adapter_unofld(struct adapter *adapter) +{ + struct t3cdev *tdev = &adapter->tdev; + + tdev->recv = NULL; + tdev->neigh_update = NULL; + + unregister_tdev(tdev); +} + +void __init cxgb3_offload_init(void) +{ + int i; + + for (i = 0; i < NUM_CPL_CMDS; ++i) + cpl_handlers[i] = do_bad_cpl; + + t3_register_cpl_handler(CPL_SMT_WRITE_RPL, do_smt_write_rpl); + t3_register_cpl_handler(CPL_L2T_WRITE_RPL, do_l2t_write_rpl); + t3_register_cpl_handler(CPL_RTE_WRITE_RPL, do_rte_write_rpl); + t3_register_cpl_handler(CPL_PASS_OPEN_RPL, do_stid_rpl); + t3_register_cpl_handler(CPL_CLOSE_LISTSRV_RPL, do_stid_rpl); + t3_register_cpl_handler(CPL_PASS_ACCEPT_REQ, do_cr); + t3_register_cpl_handler(CPL_PASS_ESTABLISH, do_hwtid_rpl); + t3_register_cpl_handler(CPL_ABORT_RPL_RSS, do_hwtid_rpl); + t3_register_cpl_handler(CPL_ABORT_RPL, do_hwtid_rpl); + t3_register_cpl_handler(CPL_RX_URG_NOTIFY, do_hwtid_rpl); + t3_register_cpl_handler(CPL_RX_DATA, do_hwtid_rpl); + t3_register_cpl_handler(CPL_TX_DATA_ACK, do_hwtid_rpl); + t3_register_cpl_handler(CPL_TX_DMA_ACK, do_hwtid_rpl); + t3_register_cpl_handler(CPL_ACT_OPEN_RPL, do_act_open_rpl); + t3_register_cpl_handler(CPL_PEER_CLOSE, do_hwtid_rpl); + t3_register_cpl_handler(CPL_CLOSE_CON_RPL, do_hwtid_rpl); + t3_register_cpl_handler(CPL_ABORT_REQ_RSS, do_abort_req_rss); + t3_register_cpl_handler(CPL_ACT_ESTABLISH, do_act_establish); + t3_register_cpl_handler(CPL_SET_TCB_RPL, do_hwtid_rpl); + t3_register_cpl_handler(CPL_GET_TCB_RPL, do_hwtid_rpl); + t3_register_cpl_handler(CPL_RDMA_TERMINATE, do_term); + t3_register_cpl_handler(CPL_RDMA_EC_STATUS, do_hwtid_rpl); + t3_register_cpl_handler(CPL_TRACE_PKT, do_trace); + t3_register_cpl_handler(CPL_RX_DATA_DDP, do_hwtid_rpl); + t3_register_cpl_handler(CPL_RX_DDP_COMPLETE, do_hwtid_rpl); + t3_register_cpl_handler(CPL_ISCSI_HDR, do_hwtid_rpl); +} diff --cc drivers/net/ethernet/chelsio/cxgb3/l2t.c index f452c4003253,000000000000..41540978a173 mode 100644,000000..100644 --- a/drivers/net/ethernet/chelsio/cxgb3/l2t.c +++ b/drivers/net/ethernet/chelsio/cxgb3/l2t.c @@@ -1,445 -1,0 +1,454 @@@ +/* + * Copyright (c) 2003-2008 Chelsio, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "t3cdev.h" +#include "cxgb3_defs.h" +#include "l2t.h" +#include "t3_cpl.h" +#include "firmware_exports.h" + +#define VLAN_NONE 0xfff + +/* + * Module locking notes: There is a RW lock protecting the L2 table as a + * whole plus a spinlock per L2T entry. Entry lookups and allocations happen + * under the protection of the table lock, individual entry changes happen + * while holding that entry's spinlock. The table lock nests outside the + * entry locks. Allocations of new entries take the table lock as writers so + * no other lookups can happen while allocating new entries. Entry updates + * take the table lock as readers so multiple entries can be updated in + * parallel. An L2T entry can be dropped by decrementing its reference count + * and therefore can happen in parallel with entry allocation but no entry + * can change state or increment its ref count during allocation as both of + * these perform lookups. + */ + +static inline unsigned int vlan_prio(const struct l2t_entry *e) +{ + return e->vlan >> 13; +} + +static inline unsigned int arp_hash(u32 key, int ifindex, + const struct l2t_data *d) +{ + return jhash_2words(key, ifindex, 0) & (d->nentries - 1); +} + +static inline void neigh_replace(struct l2t_entry *e, struct neighbour *n) +{ + neigh_hold(n); + if (e->neigh) + neigh_release(e->neigh); + e->neigh = n; +} + +/* + * Set up an L2T entry and send any packets waiting in the arp queue. The + * supplied skb is used for the CPL_L2T_WRITE_REQ. Must be called with the + * entry locked. + */ +static int setup_l2e_send_pending(struct t3cdev *dev, struct sk_buff *skb, + struct l2t_entry *e) +{ + struct cpl_l2t_write_req *req; + struct sk_buff *tmp; + + if (!skb) { + skb = alloc_skb(sizeof(*req), GFP_ATOMIC); + if (!skb) + return -ENOMEM; + } + + req = (struct cpl_l2t_write_req *)__skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_L2T_WRITE_REQ, e->idx)); + req->params = htonl(V_L2T_W_IDX(e->idx) | V_L2T_W_IFF(e->smt_idx) | + V_L2T_W_VLAN(e->vlan & VLAN_VID_MASK) | + V_L2T_W_PRIO(vlan_prio(e))); + memcpy(e->dmac, e->neigh->ha, sizeof(e->dmac)); + memcpy(req->dst_mac, e->dmac, sizeof(req->dst_mac)); + skb->priority = CPL_PRIORITY_CONTROL; + cxgb3_ofld_send(dev, skb); + + skb_queue_walk_safe(&e->arpq, skb, tmp) { + __skb_unlink(skb, &e->arpq); + cxgb3_ofld_send(dev, skb); + } + e->state = L2T_STATE_VALID; + + return 0; +} + +/* + * Add a packet to the an L2T entry's queue of packets awaiting resolution. + * Must be called with the entry's lock held. + */ +static inline void arpq_enqueue(struct l2t_entry *e, struct sk_buff *skb) +{ + __skb_queue_tail(&e->arpq, skb); +} + +int t3_l2t_send_slow(struct t3cdev *dev, struct sk_buff *skb, + struct l2t_entry *e) +{ +again: + switch (e->state) { + case L2T_STATE_STALE: /* entry is stale, kick off revalidation */ + neigh_event_send(e->neigh, NULL); + spin_lock_bh(&e->lock); + if (e->state == L2T_STATE_STALE) + e->state = L2T_STATE_VALID; + spin_unlock_bh(&e->lock); + case L2T_STATE_VALID: /* fast-path, send the packet on */ + return cxgb3_ofld_send(dev, skb); + case L2T_STATE_RESOLVING: + spin_lock_bh(&e->lock); + if (e->state != L2T_STATE_RESOLVING) { + /* ARP already completed */ + spin_unlock_bh(&e->lock); + goto again; + } + arpq_enqueue(e, skb); + spin_unlock_bh(&e->lock); + + /* + * Only the first packet added to the arpq should kick off + * resolution. However, because the alloc_skb below can fail, + * we allow each packet added to the arpq to retry resolution + * as a way of recovering from transient memory exhaustion. + * A better way would be to use a work request to retry L2T + * entries when there's no memory. + */ + if (!neigh_event_send(e->neigh, NULL)) { + skb = alloc_skb(sizeof(struct cpl_l2t_write_req), + GFP_ATOMIC); + if (!skb) + break; + + spin_lock_bh(&e->lock); + if (!skb_queue_empty(&e->arpq)) + setup_l2e_send_pending(dev, skb, e); + else /* we lost the race */ + __kfree_skb(skb); + spin_unlock_bh(&e->lock); + } + } + return 0; +} + +EXPORT_SYMBOL(t3_l2t_send_slow); + +void t3_l2t_send_event(struct t3cdev *dev, struct l2t_entry *e) +{ +again: + switch (e->state) { + case L2T_STATE_STALE: /* entry is stale, kick off revalidation */ + neigh_event_send(e->neigh, NULL); + spin_lock_bh(&e->lock); + if (e->state == L2T_STATE_STALE) { + e->state = L2T_STATE_VALID; + } + spin_unlock_bh(&e->lock); + return; + case L2T_STATE_VALID: /* fast-path, send the packet on */ + return; + case L2T_STATE_RESOLVING: + spin_lock_bh(&e->lock); + if (e->state != L2T_STATE_RESOLVING) { + /* ARP already completed */ + spin_unlock_bh(&e->lock); + goto again; + } + spin_unlock_bh(&e->lock); + + /* + * Only the first packet added to the arpq should kick off + * resolution. However, because the alloc_skb below can fail, + * we allow each packet added to the arpq to retry resolution + * as a way of recovering from transient memory exhaustion. + * A better way would be to use a work request to retry L2T + * entries when there's no memory. + */ + neigh_event_send(e->neigh, NULL); + } +} + +EXPORT_SYMBOL(t3_l2t_send_event); + +/* + * Allocate a free L2T entry. Must be called with l2t_data.lock held. + */ +static struct l2t_entry *alloc_l2e(struct l2t_data *d) +{ + struct l2t_entry *end, *e, **p; + + if (!atomic_read(&d->nfree)) + return NULL; + + /* there's definitely a free entry */ + for (e = d->rover, end = &d->l2tab[d->nentries]; e != end; ++e) + if (atomic_read(&e->refcnt) == 0) + goto found; + + for (e = &d->l2tab[1]; atomic_read(&e->refcnt); ++e) ; +found: + d->rover = e + 1; + atomic_dec(&d->nfree); + + /* + * The entry we found may be an inactive entry that is + * presently in the hash table. We need to remove it. + */ + if (e->state != L2T_STATE_UNUSED) { + int hash = arp_hash(e->addr, e->ifindex, d); + + for (p = &d->l2tab[hash].first; *p; p = &(*p)->next) + if (*p == e) { + *p = e->next; + break; + } + e->state = L2T_STATE_UNUSED; + } + return e; +} + +/* + * Called when an L2T entry has no more users. The entry is left in the hash + * table since it is likely to be reused but we also bump nfree to indicate + * that the entry can be reallocated for a different neighbor. We also drop + * the existing neighbor reference in case the neighbor is going away and is + * waiting on our reference. + * + * Because entries can be reallocated to other neighbors once their ref count + * drops to 0 we need to take the entry's lock to avoid races with a new + * incarnation. + */ +void t3_l2e_free(struct l2t_data *d, struct l2t_entry *e) +{ + spin_lock_bh(&e->lock); + if (atomic_read(&e->refcnt) == 0) { /* hasn't been recycled */ + if (e->neigh) { + neigh_release(e->neigh); + e->neigh = NULL; + } + } + spin_unlock_bh(&e->lock); + atomic_inc(&d->nfree); +} + +EXPORT_SYMBOL(t3_l2e_free); + +/* + * Update an L2T entry that was previously used for the same next hop as neigh. + * Must be called with softirqs disabled. + */ +static inline void reuse_entry(struct l2t_entry *e, struct neighbour *neigh) +{ + unsigned int nud_state; + + spin_lock(&e->lock); /* avoid race with t3_l2t_free */ + + if (neigh != e->neigh) + neigh_replace(e, neigh); + nud_state = neigh->nud_state; + if (memcmp(e->dmac, neigh->ha, sizeof(e->dmac)) || + !(nud_state & NUD_VALID)) + e->state = L2T_STATE_RESOLVING; + else if (nud_state & NUD_CONNECTED) + e->state = L2T_STATE_VALID; + else + e->state = L2T_STATE_STALE; + spin_unlock(&e->lock); +} + +struct l2t_entry *t3_l2t_get(struct t3cdev *cdev, struct neighbour *neigh, + struct net_device *dev) +{ - struct l2t_entry *e; - struct l2t_data *d = L2DATA(cdev); ++ struct l2t_entry *e = NULL; ++ struct l2t_data *d; ++ int hash; + u32 addr = *(u32 *) neigh->primary_key; + int ifidx = neigh->dev->ifindex; - int hash = arp_hash(addr, ifidx, d); + struct port_info *p = netdev_priv(dev); + int smt_idx = p->port_id; + ++ rcu_read_lock(); ++ d = L2DATA(cdev); ++ if (!d) ++ goto done_rcu; ++ ++ hash = arp_hash(addr, ifidx, d); ++ + write_lock_bh(&d->lock); + for (e = d->l2tab[hash].first; e; e = e->next) + if (e->addr == addr && e->ifindex == ifidx && + e->smt_idx == smt_idx) { + l2t_hold(d, e); + if (atomic_read(&e->refcnt) == 1) + reuse_entry(e, neigh); + goto done; + } + + /* Need to allocate a new entry */ + e = alloc_l2e(d); + if (e) { + spin_lock(&e->lock); /* avoid race with t3_l2t_free */ + e->next = d->l2tab[hash].first; + d->l2tab[hash].first = e; + e->state = L2T_STATE_RESOLVING; + e->addr = addr; + e->ifindex = ifidx; + e->smt_idx = smt_idx; + atomic_set(&e->refcnt, 1); + neigh_replace(e, neigh); + if (neigh->dev->priv_flags & IFF_802_1Q_VLAN) + e->vlan = vlan_dev_vlan_id(neigh->dev); + else + e->vlan = VLAN_NONE; + spin_unlock(&e->lock); + } +done: + write_unlock_bh(&d->lock); ++done_rcu: ++ rcu_read_unlock(); + return e; +} + +EXPORT_SYMBOL(t3_l2t_get); + +/* + * Called when address resolution fails for an L2T entry to handle packets + * on the arpq head. If a packet specifies a failure handler it is invoked, + * otherwise the packets is sent to the offload device. + * + * XXX: maybe we should abandon the latter behavior and just require a failure + * handler. + */ +static void handle_failed_resolution(struct t3cdev *dev, struct sk_buff_head *arpq) +{ + struct sk_buff *skb, *tmp; + + skb_queue_walk_safe(arpq, skb, tmp) { + struct l2t_skb_cb *cb = L2T_SKB_CB(skb); + + __skb_unlink(skb, arpq); + if (cb->arp_failure_handler) + cb->arp_failure_handler(dev, skb); + else + cxgb3_ofld_send(dev, skb); + } +} + +/* + * Called when the host's ARP layer makes a change to some entry that is + * loaded into the HW L2 table. + */ +void t3_l2t_update(struct t3cdev *dev, struct neighbour *neigh) +{ + struct sk_buff_head arpq; + struct l2t_entry *e; + struct l2t_data *d = L2DATA(dev); + u32 addr = *(u32 *) neigh->primary_key; + int ifidx = neigh->dev->ifindex; + int hash = arp_hash(addr, ifidx, d); + + read_lock_bh(&d->lock); + for (e = d->l2tab[hash].first; e; e = e->next) + if (e->addr == addr && e->ifindex == ifidx) { + spin_lock(&e->lock); + goto found; + } + read_unlock_bh(&d->lock); + return; + +found: + __skb_queue_head_init(&arpq); + + read_unlock(&d->lock); + if (atomic_read(&e->refcnt)) { + if (neigh != e->neigh) + neigh_replace(e, neigh); + + if (e->state == L2T_STATE_RESOLVING) { + if (neigh->nud_state & NUD_FAILED) { + skb_queue_splice_init(&e->arpq, &arpq); + } else if (neigh->nud_state & (NUD_CONNECTED|NUD_STALE)) + setup_l2e_send_pending(dev, NULL, e); + } else { + e->state = neigh->nud_state & NUD_CONNECTED ? + L2T_STATE_VALID : L2T_STATE_STALE; + if (memcmp(e->dmac, neigh->ha, 6)) + setup_l2e_send_pending(dev, NULL, e); + } + } + spin_unlock_bh(&e->lock); + + if (!skb_queue_empty(&arpq)) + handle_failed_resolution(dev, &arpq); +} + +struct l2t_data *t3_init_l2t(unsigned int l2t_capacity) +{ + struct l2t_data *d; + int i, size = sizeof(*d) + l2t_capacity * sizeof(struct l2t_entry); + + d = cxgb_alloc_mem(size); + if (!d) + return NULL; + + d->nentries = l2t_capacity; + d->rover = &d->l2tab[1]; /* entry 0 is not used */ + atomic_set(&d->nfree, l2t_capacity - 1); + rwlock_init(&d->lock); + + for (i = 0; i < l2t_capacity; ++i) { + d->l2tab[i].idx = i; + d->l2tab[i].state = L2T_STATE_UNUSED; + __skb_queue_head_init(&d->l2tab[i].arpq); + spin_lock_init(&d->l2tab[i].lock); + atomic_set(&d->l2tab[i].refcnt, 0); + } + return d; +} + +void t3_free_l2t(struct l2t_data *d) +{ + cxgb_free_mem(d); +} + diff --cc drivers/net/ethernet/chelsio/cxgb3/l2t.h index 7a12d52ed4fc,000000000000..c5f54796e2cb mode 100644,000000..100644 --- a/drivers/net/ethernet/chelsio/cxgb3/l2t.h +++ b/drivers/net/ethernet/chelsio/cxgb3/l2t.h @@@ -1,141 -1,0 +1,149 @@@ +/* + * Copyright (c) 2003-2008 Chelsio, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _CHELSIO_L2T_H +#define _CHELSIO_L2T_H + +#include +#include "t3cdev.h" +#include + +enum { + L2T_STATE_VALID, /* entry is up to date */ + L2T_STATE_STALE, /* entry may be used but needs revalidation */ + L2T_STATE_RESOLVING, /* entry needs address resolution */ + L2T_STATE_UNUSED /* entry not in use */ +}; + +struct neighbour; +struct sk_buff; + +/* + * Each L2T entry plays multiple roles. First of all, it keeps state for the + * corresponding entry of the HW L2 table and maintains a queue of offload + * packets awaiting address resolution. Second, it is a node of a hash table + * chain, where the nodes of the chain are linked together through their next + * pointer. Finally, each node is a bucket of a hash table, pointing to the + * first element in its chain through its first pointer. + */ +struct l2t_entry { + u16 state; /* entry state */ + u16 idx; /* entry index */ + u32 addr; /* dest IP address */ + int ifindex; /* neighbor's net_device's ifindex */ + u16 smt_idx; /* SMT index */ + u16 vlan; /* VLAN TCI (id: bits 0-11, prio: 13-15 */ + struct neighbour *neigh; /* associated neighbour */ + struct l2t_entry *first; /* start of hash chain */ + struct l2t_entry *next; /* next l2t_entry on chain */ + struct sk_buff_head arpq; /* queue of packets awaiting resolution */ + spinlock_t lock; + atomic_t refcnt; /* entry reference count */ + u8 dmac[6]; /* neighbour's MAC address */ +}; + +struct l2t_data { + unsigned int nentries; /* number of entries */ + struct l2t_entry *rover; /* starting point for next allocation */ + atomic_t nfree; /* number of free entries */ + rwlock_t lock; + struct l2t_entry l2tab[0]; ++ struct rcu_head rcu_head; /* to handle rcu cleanup */ +}; + +typedef void (*arp_failure_handler_func)(struct t3cdev * dev, + struct sk_buff * skb); + +/* + * Callback stored in an skb to handle address resolution failure. + */ +struct l2t_skb_cb { + arp_failure_handler_func arp_failure_handler; +}; + +#define L2T_SKB_CB(skb) ((struct l2t_skb_cb *)(skb)->cb) + +static inline void set_arp_failure_handler(struct sk_buff *skb, + arp_failure_handler_func hnd) +{ + L2T_SKB_CB(skb)->arp_failure_handler = hnd; +} + +/* + * Getting to the L2 data from an offload device. + */ - #define L2DATA(dev) ((dev)->l2opt) ++#define L2DATA(cdev) (rcu_dereference((cdev)->l2opt)) + +#define W_TCB_L2T_IX 0 +#define S_TCB_L2T_IX 7 +#define M_TCB_L2T_IX 0x7ffULL +#define V_TCB_L2T_IX(x) ((x) << S_TCB_L2T_IX) + +void t3_l2e_free(struct l2t_data *d, struct l2t_entry *e); +void t3_l2t_update(struct t3cdev *dev, struct neighbour *neigh); +struct l2t_entry *t3_l2t_get(struct t3cdev *cdev, struct neighbour *neigh, + struct net_device *dev); +int t3_l2t_send_slow(struct t3cdev *dev, struct sk_buff *skb, + struct l2t_entry *e); +void t3_l2t_send_event(struct t3cdev *dev, struct l2t_entry *e); +struct l2t_data *t3_init_l2t(unsigned int l2t_capacity); +void t3_free_l2t(struct l2t_data *d); + +int cxgb3_ofld_send(struct t3cdev *dev, struct sk_buff *skb); + +static inline int l2t_send(struct t3cdev *dev, struct sk_buff *skb, + struct l2t_entry *e) +{ + if (likely(e->state == L2T_STATE_VALID)) + return cxgb3_ofld_send(dev, skb); + return t3_l2t_send_slow(dev, skb, e); +} + - static inline void l2t_release(struct l2t_data *d, struct l2t_entry *e) ++static inline void l2t_release(struct t3cdev *t, struct l2t_entry *e) +{ - if (atomic_dec_and_test(&e->refcnt)) ++ struct l2t_data *d; ++ ++ rcu_read_lock(); ++ d = L2DATA(t); ++ ++ if (atomic_dec_and_test(&e->refcnt) && d) + t3_l2e_free(d, e); ++ ++ rcu_read_unlock(); +} + +static inline void l2t_hold(struct l2t_data *d, struct l2t_entry *e) +{ - if (atomic_add_return(1, &e->refcnt) == 1) /* 0 -> 1 transition */ ++ if (d && atomic_add_return(1, &e->refcnt) == 1) /* 0 -> 1 transition */ + atomic_dec(&d->nfree); +} + +#endif diff --cc drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index 40b395f932cf,000000000000..4c8f42afa3c6 mode 100644,000000..100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@@ -1,3809 -1,0 +1,3812 @@@ +/* + * This file is part of the Chelsio T4 Ethernet driver for Linux. + * + * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cxgb4.h" +#include "t4_regs.h" +#include "t4_msg.h" +#include "t4fw_api.h" +#include "l2t.h" + +#define DRV_VERSION "1.3.0-ko" +#define DRV_DESC "Chelsio T4 Network Driver" + +/* + * Max interrupt hold-off timer value in us. Queues fall back to this value + * under extreme memory pressure so it's largish to give the system time to + * recover. + */ +#define MAX_SGE_TIMERVAL 200U + +#ifdef CONFIG_PCI_IOV +/* + * Virtual Function provisioning constants. We need two extra Ingress Queues + * with Interrupt capability to serve as the VF's Firmware Event Queue and + * Forwarded Interrupt Queue (when using MSI mode) -- neither will have Free + * Lists associated with them). For each Ethernet/Control Egress Queue and + * for each Free List, we need an Egress Context. + */ +enum { + VFRES_NPORTS = 1, /* # of "ports" per VF */ + VFRES_NQSETS = 2, /* # of "Queue Sets" per VF */ + + VFRES_NVI = VFRES_NPORTS, /* # of Virtual Interfaces */ + VFRES_NETHCTRL = VFRES_NQSETS, /* # of EQs used for ETH or CTRL Qs */ + VFRES_NIQFLINT = VFRES_NQSETS+2,/* # of ingress Qs/w Free List(s)/intr */ + VFRES_NIQ = 0, /* # of non-fl/int ingress queues */ + VFRES_NEQ = VFRES_NQSETS*2, /* # of egress queues */ + VFRES_TC = 0, /* PCI-E traffic class */ + VFRES_NEXACTF = 16, /* # of exact MPS filters */ + + VFRES_R_CAPS = FW_CMD_CAP_DMAQ|FW_CMD_CAP_VF|FW_CMD_CAP_PORT, + VFRES_WX_CAPS = FW_CMD_CAP_DMAQ|FW_CMD_CAP_VF, +}; + +/* + * Provide a Port Access Rights Mask for the specified PF/VF. This is very + * static and likely not to be useful in the long run. We really need to + * implement some form of persistent configuration which the firmware + * controls. + */ +static unsigned int pfvfres_pmask(struct adapter *adapter, + unsigned int pf, unsigned int vf) +{ + unsigned int portn, portvec; + + /* + * Give PF's access to all of the ports. + */ + if (vf == 0) + return FW_PFVF_CMD_PMASK_MASK; + + /* + * For VFs, we'll assign them access to the ports based purely on the + * PF. We assign active ports in order, wrapping around if there are + * fewer active ports than PFs: e.g. active port[pf % nports]. + * Unfortunately the adapter's port_info structs haven't been + * initialized yet so we have to compute this. + */ + if (adapter->params.nports == 0) + return 0; + + portn = pf % adapter->params.nports; + portvec = adapter->params.portvec; + for (;;) { + /* + * Isolate the lowest set bit in the port vector. If we're at + * the port number that we want, return that as the pmask. + * otherwise mask that bit out of the port vector and + * decrement our port number ... + */ + unsigned int pmask = portvec ^ (portvec & (portvec-1)); + if (portn == 0) + return pmask; + portn--; + portvec &= ~pmask; + } + /*NOTREACHED*/ +} +#endif + +enum { + MEMWIN0_APERTURE = 65536, + MEMWIN0_BASE = 0x30000, + MEMWIN1_APERTURE = 32768, + MEMWIN1_BASE = 0x28000, + MEMWIN2_APERTURE = 2048, + MEMWIN2_BASE = 0x1b800, +}; + +enum { + MAX_TXQ_ENTRIES = 16384, + MAX_CTRL_TXQ_ENTRIES = 1024, + MAX_RSPQ_ENTRIES = 16384, + MAX_RX_BUFFERS = 16384, + MIN_TXQ_ENTRIES = 32, + MIN_CTRL_TXQ_ENTRIES = 32, + MIN_RSPQ_ENTRIES = 128, + MIN_FL_ENTRIES = 16 +}; + +#define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \ + NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\ + NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR) + +#define CH_DEVICE(devid, data) { PCI_VDEVICE(CHELSIO, devid), (data) } + +static DEFINE_PCI_DEVICE_TABLE(cxgb4_pci_tbl) = { + CH_DEVICE(0xa000, 0), /* PE10K */ + CH_DEVICE(0x4001, -1), + CH_DEVICE(0x4002, -1), + CH_DEVICE(0x4003, -1), + CH_DEVICE(0x4004, -1), + CH_DEVICE(0x4005, -1), + CH_DEVICE(0x4006, -1), + CH_DEVICE(0x4007, -1), + CH_DEVICE(0x4008, -1), + CH_DEVICE(0x4009, -1), + CH_DEVICE(0x400a, -1), + CH_DEVICE(0x4401, 4), + CH_DEVICE(0x4402, 4), + CH_DEVICE(0x4403, 4), + CH_DEVICE(0x4404, 4), + CH_DEVICE(0x4405, 4), + CH_DEVICE(0x4406, 4), + CH_DEVICE(0x4407, 4), + CH_DEVICE(0x4408, 4), + CH_DEVICE(0x4409, 4), + CH_DEVICE(0x440a, 4), + { 0, } +}; + +#define FW_FNAME "cxgb4/t4fw.bin" + +MODULE_DESCRIPTION(DRV_DESC); +MODULE_AUTHOR("Chelsio Communications"); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_VERSION(DRV_VERSION); +MODULE_DEVICE_TABLE(pci, cxgb4_pci_tbl); +MODULE_FIRMWARE(FW_FNAME); + +static int dflt_msg_enable = DFLT_MSG_ENABLE; + +module_param(dflt_msg_enable, int, 0644); +MODULE_PARM_DESC(dflt_msg_enable, "Chelsio T4 default message enable bitmap"); + +/* + * The driver uses the best interrupt scheme available on a platform in the + * order MSI-X, MSI, legacy INTx interrupts. This parameter determines which + * of these schemes the driver may consider as follows: + * + * msi = 2: choose from among all three options + * msi = 1: only consider MSI and INTx interrupts + * msi = 0: force INTx interrupts + */ +static int msi = 2; + +module_param(msi, int, 0644); +MODULE_PARM_DESC(msi, "whether to use INTx (0), MSI (1) or MSI-X (2)"); + +/* + * Queue interrupt hold-off timer values. Queues default to the first of these + * upon creation. + */ +static unsigned int intr_holdoff[SGE_NTIMERS - 1] = { 5, 10, 20, 50, 100 }; + +module_param_array(intr_holdoff, uint, NULL, 0644); +MODULE_PARM_DESC(intr_holdoff, "values for queue interrupt hold-off timers " + "0..4 in microseconds"); + +static unsigned int intr_cnt[SGE_NCOUNTERS - 1] = { 4, 8, 16 }; + +module_param_array(intr_cnt, uint, NULL, 0644); +MODULE_PARM_DESC(intr_cnt, + "thresholds 1..3 for queue interrupt packet counters"); + +static int vf_acls; + +#ifdef CONFIG_PCI_IOV +module_param(vf_acls, bool, 0644); +MODULE_PARM_DESC(vf_acls, "if set enable virtualization L2 ACL enforcement"); + +static unsigned int num_vf[4]; + +module_param_array(num_vf, uint, NULL, 0644); +MODULE_PARM_DESC(num_vf, "number of VFs for each of PFs 0-3"); +#endif + +static struct dentry *cxgb4_debugfs_root; + +static LIST_HEAD(adapter_list); +static DEFINE_MUTEX(uld_mutex); +static struct cxgb4_uld_info ulds[CXGB4_ULD_MAX]; +static const char *uld_str[] = { "RDMA", "iSCSI" }; + +static void link_report(struct net_device *dev) +{ + if (!netif_carrier_ok(dev)) + netdev_info(dev, "link down\n"); + else { + static const char *fc[] = { "no", "Rx", "Tx", "Tx/Rx" }; + + const char *s = "10Mbps"; + const struct port_info *p = netdev_priv(dev); + + switch (p->link_cfg.speed) { + case SPEED_10000: + s = "10Gbps"; + break; + case SPEED_1000: + s = "1000Mbps"; + break; + case SPEED_100: + s = "100Mbps"; + break; + } + + netdev_info(dev, "link up, %s, full-duplex, %s PAUSE\n", s, + fc[p->link_cfg.fc]); + } +} + +void t4_os_link_changed(struct adapter *adapter, int port_id, int link_stat) +{ + struct net_device *dev = adapter->port[port_id]; + + /* Skip changes from disabled ports. */ + if (netif_running(dev) && link_stat != netif_carrier_ok(dev)) { + if (link_stat) + netif_carrier_on(dev); + else + netif_carrier_off(dev); + + link_report(dev); + } +} + +void t4_os_portmod_changed(const struct adapter *adap, int port_id) +{ + static const char *mod_str[] = { + NULL, "LR", "SR", "ER", "passive DA", "active DA", "LRM" + }; + + const struct net_device *dev = adap->port[port_id]; + const struct port_info *pi = netdev_priv(dev); + + if (pi->mod_type == FW_PORT_MOD_TYPE_NONE) + netdev_info(dev, "port module unplugged\n"); + else if (pi->mod_type < ARRAY_SIZE(mod_str)) + netdev_info(dev, "%s module inserted\n", mod_str[pi->mod_type]); +} + +/* + * Configure the exact and hash address filters to handle a port's multicast + * and secondary unicast MAC addresses. + */ +static int set_addr_filters(const struct net_device *dev, bool sleep) +{ + u64 mhash = 0; + u64 uhash = 0; + bool free = true; + u16 filt_idx[7]; + const u8 *addr[7]; + int ret, naddr = 0; + const struct netdev_hw_addr *ha; + int uc_cnt = netdev_uc_count(dev); + int mc_cnt = netdev_mc_count(dev); + const struct port_info *pi = netdev_priv(dev); + unsigned int mb = pi->adapter->fn; + + /* first do the secondary unicast addresses */ + netdev_for_each_uc_addr(ha, dev) { + addr[naddr++] = ha->addr; + if (--uc_cnt == 0 || naddr >= ARRAY_SIZE(addr)) { + ret = t4_alloc_mac_filt(pi->adapter, mb, pi->viid, free, + naddr, addr, filt_idx, &uhash, sleep); + if (ret < 0) + return ret; + + free = false; + naddr = 0; + } + } + + /* next set up the multicast addresses */ + netdev_for_each_mc_addr(ha, dev) { + addr[naddr++] = ha->addr; + if (--mc_cnt == 0 || naddr >= ARRAY_SIZE(addr)) { + ret = t4_alloc_mac_filt(pi->adapter, mb, pi->viid, free, + naddr, addr, filt_idx, &mhash, sleep); + if (ret < 0) + return ret; + + free = false; + naddr = 0; + } + } + + return t4_set_addr_hash(pi->adapter, mb, pi->viid, uhash != 0, + uhash | mhash, sleep); +} + +/* + * Set Rx properties of a port, such as promiscruity, address filters, and MTU. + * If @mtu is -1 it is left unchanged. + */ +static int set_rxmode(struct net_device *dev, int mtu, bool sleep_ok) +{ + int ret; + struct port_info *pi = netdev_priv(dev); + + ret = set_addr_filters(dev, sleep_ok); + if (ret == 0) + ret = t4_set_rxmode(pi->adapter, pi->adapter->fn, pi->viid, mtu, + (dev->flags & IFF_PROMISC) ? 1 : 0, + (dev->flags & IFF_ALLMULTI) ? 1 : 0, 1, -1, + sleep_ok); + return ret; +} + +/** + * link_start - enable a port + * @dev: the port to enable + * + * Performs the MAC and PHY actions needed to enable a port. + */ +static int link_start(struct net_device *dev) +{ + int ret; + struct port_info *pi = netdev_priv(dev); + unsigned int mb = pi->adapter->fn; + + /* + * We do not set address filters and promiscuity here, the stack does + * that step explicitly. + */ + ret = t4_set_rxmode(pi->adapter, mb, pi->viid, dev->mtu, -1, -1, -1, + !!(dev->features & NETIF_F_HW_VLAN_RX), true); + if (ret == 0) { + ret = t4_change_mac(pi->adapter, mb, pi->viid, + pi->xact_addr_filt, dev->dev_addr, true, + true); + if (ret >= 0) { + pi->xact_addr_filt = ret; + ret = 0; + } + } + if (ret == 0) + ret = t4_link_start(pi->adapter, mb, pi->tx_chan, + &pi->link_cfg); + if (ret == 0) + ret = t4_enable_vi(pi->adapter, mb, pi->viid, true, true); + return ret; +} + +/* + * Response queue handler for the FW event queue. + */ +static int fwevtq_handler(struct sge_rspq *q, const __be64 *rsp, + const struct pkt_gl *gl) +{ + u8 opcode = ((const struct rss_header *)rsp)->opcode; + + rsp++; /* skip RSS header */ + if (likely(opcode == CPL_SGE_EGR_UPDATE)) { + const struct cpl_sge_egr_update *p = (void *)rsp; + unsigned int qid = EGR_QID(ntohl(p->opcode_qid)); + struct sge_txq *txq; + + txq = q->adap->sge.egr_map[qid - q->adap->sge.egr_start]; + txq->restarts++; + if ((u8 *)txq < (u8 *)q->adap->sge.ofldtxq) { + struct sge_eth_txq *eq; + + eq = container_of(txq, struct sge_eth_txq, q); + netif_tx_wake_queue(eq->txq); + } else { + struct sge_ofld_txq *oq; + + oq = container_of(txq, struct sge_ofld_txq, q); + tasklet_schedule(&oq->qresume_tsk); + } + } else if (opcode == CPL_FW6_MSG || opcode == CPL_FW4_MSG) { + const struct cpl_fw6_msg *p = (void *)rsp; + + if (p->type == 0) + t4_handle_fw_rpl(q->adap, p->data); + } else if (opcode == CPL_L2T_WRITE_RPL) { + const struct cpl_l2t_write_rpl *p = (void *)rsp; + + do_l2t_write_rpl(q->adap, p); + } else + dev_err(q->adap->pdev_dev, + "unexpected CPL %#x on FW event queue\n", opcode); + return 0; +} + +/** + * uldrx_handler - response queue handler for ULD queues + * @q: the response queue that received the packet + * @rsp: the response queue descriptor holding the offload message + * @gl: the gather list of packet fragments + * + * Deliver an ingress offload packet to a ULD. All processing is done by + * the ULD, we just maintain statistics. + */ +static int uldrx_handler(struct sge_rspq *q, const __be64 *rsp, + const struct pkt_gl *gl) +{ + struct sge_ofld_rxq *rxq = container_of(q, struct sge_ofld_rxq, rspq); + + if (ulds[q->uld].rx_handler(q->adap->uld_handle[q->uld], rsp, gl)) { + rxq->stats.nomem++; + return -1; + } + if (gl == NULL) + rxq->stats.imm++; + else if (gl == CXGB4_MSG_AN) + rxq->stats.an++; + else + rxq->stats.pkts++; + return 0; +} + +static void disable_msi(struct adapter *adapter) +{ + if (adapter->flags & USING_MSIX) { + pci_disable_msix(adapter->pdev); + adapter->flags &= ~USING_MSIX; + } else if (adapter->flags & USING_MSI) { + pci_disable_msi(adapter->pdev); + adapter->flags &= ~USING_MSI; + } +} + +/* + * Interrupt handler for non-data events used with MSI-X. + */ +static irqreturn_t t4_nondata_intr(int irq, void *cookie) +{ + struct adapter *adap = cookie; + + u32 v = t4_read_reg(adap, MYPF_REG(PL_PF_INT_CAUSE)); + if (v & PFSW) { + adap->swintr = 1; + t4_write_reg(adap, MYPF_REG(PL_PF_INT_CAUSE), v); + } + t4_slow_intr_handler(adap); + return IRQ_HANDLED; +} + +/* + * Name the MSI-X interrupts. + */ +static void name_msix_vecs(struct adapter *adap) +{ + int i, j, msi_idx = 2, n = sizeof(adap->msix_info[0].desc); + + /* non-data interrupts */ + snprintf(adap->msix_info[0].desc, n, "%s", adap->port[0]->name); + + /* FW events */ + snprintf(adap->msix_info[1].desc, n, "%s-FWeventq", + adap->port[0]->name); + + /* Ethernet queues */ + for_each_port(adap, j) { + struct net_device *d = adap->port[j]; + const struct port_info *pi = netdev_priv(d); + + for (i = 0; i < pi->nqsets; i++, msi_idx++) + snprintf(adap->msix_info[msi_idx].desc, n, "%s-Rx%d", + d->name, i); + } + + /* offload queues */ + for_each_ofldrxq(&adap->sge, i) + snprintf(adap->msix_info[msi_idx++].desc, n, "%s-ofld%d", + adap->port[0]->name, i); + + for_each_rdmarxq(&adap->sge, i) + snprintf(adap->msix_info[msi_idx++].desc, n, "%s-rdma%d", + adap->port[0]->name, i); +} + +static int request_msix_queue_irqs(struct adapter *adap) +{ + struct sge *s = &adap->sge; + int err, ethqidx, ofldqidx = 0, rdmaqidx = 0, msi = 2; + + err = request_irq(adap->msix_info[1].vec, t4_sge_intr_msix, 0, + adap->msix_info[1].desc, &s->fw_evtq); + if (err) + return err; + + for_each_ethrxq(s, ethqidx) { + err = request_irq(adap->msix_info[msi].vec, t4_sge_intr_msix, 0, + adap->msix_info[msi].desc, + &s->ethrxq[ethqidx].rspq); + if (err) + goto unwind; + msi++; + } + for_each_ofldrxq(s, ofldqidx) { + err = request_irq(adap->msix_info[msi].vec, t4_sge_intr_msix, 0, + adap->msix_info[msi].desc, + &s->ofldrxq[ofldqidx].rspq); + if (err) + goto unwind; + msi++; + } + for_each_rdmarxq(s, rdmaqidx) { + err = request_irq(adap->msix_info[msi].vec, t4_sge_intr_msix, 0, + adap->msix_info[msi].desc, + &s->rdmarxq[rdmaqidx].rspq); + if (err) + goto unwind; + msi++; + } + return 0; + +unwind: + while (--rdmaqidx >= 0) + free_irq(adap->msix_info[--msi].vec, + &s->rdmarxq[rdmaqidx].rspq); + while (--ofldqidx >= 0) + free_irq(adap->msix_info[--msi].vec, + &s->ofldrxq[ofldqidx].rspq); + while (--ethqidx >= 0) + free_irq(adap->msix_info[--msi].vec, &s->ethrxq[ethqidx].rspq); + free_irq(adap->msix_info[1].vec, &s->fw_evtq); + return err; +} + +static void free_msix_queue_irqs(struct adapter *adap) +{ + int i, msi = 2; + struct sge *s = &adap->sge; + + free_irq(adap->msix_info[1].vec, &s->fw_evtq); + for_each_ethrxq(s, i) + free_irq(adap->msix_info[msi++].vec, &s->ethrxq[i].rspq); + for_each_ofldrxq(s, i) + free_irq(adap->msix_info[msi++].vec, &s->ofldrxq[i].rspq); + for_each_rdmarxq(s, i) + free_irq(adap->msix_info[msi++].vec, &s->rdmarxq[i].rspq); +} + +/** + * write_rss - write the RSS table for a given port + * @pi: the port + * @queues: array of queue indices for RSS + * + * Sets up the portion of the HW RSS table for the port's VI to distribute + * packets to the Rx queues in @queues. + */ +static int write_rss(const struct port_info *pi, const u16 *queues) +{ + u16 *rss; + int i, err; + const struct sge_eth_rxq *q = &pi->adapter->sge.ethrxq[pi->first_qset]; + + rss = kmalloc(pi->rss_size * sizeof(u16), GFP_KERNEL); + if (!rss) + return -ENOMEM; + + /* map the queue indices to queue ids */ + for (i = 0; i < pi->rss_size; i++, queues++) + rss[i] = q[*queues].rspq.abs_id; + + err = t4_config_rss_range(pi->adapter, pi->adapter->fn, pi->viid, 0, + pi->rss_size, rss, pi->rss_size); + kfree(rss); + return err; +} + +/** + * setup_rss - configure RSS + * @adap: the adapter + * + * Sets up RSS for each port. + */ +static int setup_rss(struct adapter *adap) +{ + int i, err; + + for_each_port(adap, i) { + const struct port_info *pi = adap2pinfo(adap, i); + + err = write_rss(pi, pi->rss); + if (err) + return err; + } + return 0; +} + +/* + * Return the channel of the ingress queue with the given qid. + */ +static unsigned int rxq_to_chan(const struct sge *p, unsigned int qid) +{ + qid -= p->ingr_start; + return netdev2pinfo(p->ingr_map[qid]->netdev)->tx_chan; +} + +/* + * Wait until all NAPI handlers are descheduled. + */ +static void quiesce_rx(struct adapter *adap) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(adap->sge.ingr_map); i++) { + struct sge_rspq *q = adap->sge.ingr_map[i]; + + if (q && q->handler) + napi_disable(&q->napi); + } +} + +/* + * Enable NAPI scheduling and interrupt generation for all Rx queues. + */ +static void enable_rx(struct adapter *adap) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(adap->sge.ingr_map); i++) { + struct sge_rspq *q = adap->sge.ingr_map[i]; + + if (!q) + continue; + if (q->handler) + napi_enable(&q->napi); + /* 0-increment GTS to start the timer and enable interrupts */ + t4_write_reg(adap, MYPF_REG(SGE_PF_GTS), + SEINTARM(q->intr_params) | + INGRESSQID(q->cntxt_id)); + } +} + +/** + * setup_sge_queues - configure SGE Tx/Rx/response queues + * @adap: the adapter + * + * Determines how many sets of SGE queues to use and initializes them. + * We support multiple queue sets per port if we have MSI-X, otherwise + * just one queue set per port. + */ +static int setup_sge_queues(struct adapter *adap) +{ + int err, msi_idx, i, j; + struct sge *s = &adap->sge; + + bitmap_zero(s->starving_fl, MAX_EGRQ); + bitmap_zero(s->txq_maperr, MAX_EGRQ); + + if (adap->flags & USING_MSIX) + msi_idx = 1; /* vector 0 is for non-queue interrupts */ + else { + err = t4_sge_alloc_rxq(adap, &s->intrq, false, adap->port[0], 0, + NULL, NULL); + if (err) + return err; + msi_idx = -((int)s->intrq.abs_id + 1); + } + + err = t4_sge_alloc_rxq(adap, &s->fw_evtq, true, adap->port[0], + msi_idx, NULL, fwevtq_handler); + if (err) { +freeout: t4_free_sge_resources(adap); + return err; + } + + for_each_port(adap, i) { + struct net_device *dev = adap->port[i]; + struct port_info *pi = netdev_priv(dev); + struct sge_eth_rxq *q = &s->ethrxq[pi->first_qset]; + struct sge_eth_txq *t = &s->ethtxq[pi->first_qset]; + + for (j = 0; j < pi->nqsets; j++, q++) { + if (msi_idx > 0) + msi_idx++; + err = t4_sge_alloc_rxq(adap, &q->rspq, false, dev, + msi_idx, &q->fl, + t4_ethrx_handler); + if (err) + goto freeout; + q->rspq.idx = j; + memset(&q->stats, 0, sizeof(q->stats)); + } + for (j = 0; j < pi->nqsets; j++, t++) { + err = t4_sge_alloc_eth_txq(adap, t, dev, + netdev_get_tx_queue(dev, j), + s->fw_evtq.cntxt_id); + if (err) + goto freeout; + } + } + + j = s->ofldqsets / adap->params.nports; /* ofld queues per channel */ + for_each_ofldrxq(s, i) { + struct sge_ofld_rxq *q = &s->ofldrxq[i]; + struct net_device *dev = adap->port[i / j]; + + if (msi_idx > 0) + msi_idx++; + err = t4_sge_alloc_rxq(adap, &q->rspq, false, dev, msi_idx, + &q->fl, uldrx_handler); + if (err) + goto freeout; + memset(&q->stats, 0, sizeof(q->stats)); + s->ofld_rxq[i] = q->rspq.abs_id; + err = t4_sge_alloc_ofld_txq(adap, &s->ofldtxq[i], dev, + s->fw_evtq.cntxt_id); + if (err) + goto freeout; + } + + for_each_rdmarxq(s, i) { + struct sge_ofld_rxq *q = &s->rdmarxq[i]; + + if (msi_idx > 0) + msi_idx++; + err = t4_sge_alloc_rxq(adap, &q->rspq, false, adap->port[i], + msi_idx, &q->fl, uldrx_handler); + if (err) + goto freeout; + memset(&q->stats, 0, sizeof(q->stats)); + s->rdma_rxq[i] = q->rspq.abs_id; + } + + for_each_port(adap, i) { + /* + * Note that ->rdmarxq[i].rspq.cntxt_id below is 0 if we don't + * have RDMA queues, and that's the right value. + */ + err = t4_sge_alloc_ctrl_txq(adap, &s->ctrlq[i], adap->port[i], + s->fw_evtq.cntxt_id, + s->rdmarxq[i].rspq.cntxt_id); + if (err) + goto freeout; + } + + t4_write_reg(adap, MPS_TRC_RSS_CONTROL, + RSSCONTROL(netdev2pinfo(adap->port[0])->tx_chan) | + QUEUENUMBER(s->ethrxq[0].rspq.abs_id)); + return 0; +} + +/* + * Returns 0 if new FW was successfully loaded, a positive errno if a load was + * started but failed, and a negative errno if flash load couldn't start. + */ +static int upgrade_fw(struct adapter *adap) +{ + int ret; + u32 vers; + const struct fw_hdr *hdr; + const struct firmware *fw; + struct device *dev = adap->pdev_dev; + + ret = request_firmware(&fw, FW_FNAME, dev); + if (ret < 0) { + dev_err(dev, "unable to load firmware image " FW_FNAME + ", error %d\n", ret); + return ret; + } + + hdr = (const struct fw_hdr *)fw->data; + vers = ntohl(hdr->fw_ver); + if (FW_HDR_FW_VER_MAJOR_GET(vers) != FW_VERSION_MAJOR) { + ret = -EINVAL; /* wrong major version, won't do */ + goto out; + } + + /* + * If the flash FW is unusable or we found something newer, load it. + */ + if (FW_HDR_FW_VER_MAJOR_GET(adap->params.fw_vers) != FW_VERSION_MAJOR || + vers > adap->params.fw_vers) { + ret = -t4_load_fw(adap, fw->data, fw->size); + if (!ret) + dev_info(dev, "firmware upgraded to version %pI4 from " + FW_FNAME "\n", &hdr->fw_ver); + } +out: release_firmware(fw); + return ret; +} + +/* + * Allocate a chunk of memory using kmalloc or, if that fails, vmalloc. + * The allocated memory is cleared. + */ +void *t4_alloc_mem(size_t size) +{ + void *p = kzalloc(size, GFP_KERNEL); + + if (!p) + p = vzalloc(size); + return p; +} + +/* + * Free memory allocated through alloc_mem(). + */ +static void t4_free_mem(void *addr) +{ + if (is_vmalloc_addr(addr)) + vfree(addr); + else + kfree(addr); +} + +static inline int is_offload(const struct adapter *adap) +{ + return adap->params.offload; +} + +/* + * Implementation of ethtool operations. + */ + +static u32 get_msglevel(struct net_device *dev) +{ + return netdev2adap(dev)->msg_enable; +} + +static void set_msglevel(struct net_device *dev, u32 val) +{ + netdev2adap(dev)->msg_enable = val; +} + +static char stats_strings[][ETH_GSTRING_LEN] = { + "TxOctetsOK ", + "TxFramesOK ", + "TxBroadcastFrames ", + "TxMulticastFrames ", + "TxUnicastFrames ", + "TxErrorFrames ", + + "TxFrames64 ", + "TxFrames65To127 ", + "TxFrames128To255 ", + "TxFrames256To511 ", + "TxFrames512To1023 ", + "TxFrames1024To1518 ", + "TxFrames1519ToMax ", + + "TxFramesDropped ", + "TxPauseFrames ", + "TxPPP0Frames ", + "TxPPP1Frames ", + "TxPPP2Frames ", + "TxPPP3Frames ", + "TxPPP4Frames ", + "TxPPP5Frames ", + "TxPPP6Frames ", + "TxPPP7Frames ", + + "RxOctetsOK ", + "RxFramesOK ", + "RxBroadcastFrames ", + "RxMulticastFrames ", + "RxUnicastFrames ", + + "RxFramesTooLong ", + "RxJabberErrors ", + "RxFCSErrors ", + "RxLengthErrors ", + "RxSymbolErrors ", + "RxRuntFrames ", + + "RxFrames64 ", + "RxFrames65To127 ", + "RxFrames128To255 ", + "RxFrames256To511 ", + "RxFrames512To1023 ", + "RxFrames1024To1518 ", + "RxFrames1519ToMax ", + + "RxPauseFrames ", + "RxPPP0Frames ", + "RxPPP1Frames ", + "RxPPP2Frames ", + "RxPPP3Frames ", + "RxPPP4Frames ", + "RxPPP5Frames ", + "RxPPP6Frames ", + "RxPPP7Frames ", + + "RxBG0FramesDropped ", + "RxBG1FramesDropped ", + "RxBG2FramesDropped ", + "RxBG3FramesDropped ", + "RxBG0FramesTrunc ", + "RxBG1FramesTrunc ", + "RxBG2FramesTrunc ", + "RxBG3FramesTrunc ", + + "TSO ", + "TxCsumOffload ", + "RxCsumGood ", + "VLANextractions ", + "VLANinsertions ", + "GROpackets ", + "GROmerged ", +}; + +static int get_sset_count(struct net_device *dev, int sset) +{ + switch (sset) { + case ETH_SS_STATS: + return ARRAY_SIZE(stats_strings); + default: + return -EOPNOTSUPP; + } +} + +#define T4_REGMAP_SIZE (160 * 1024) + +static int get_regs_len(struct net_device *dev) +{ + return T4_REGMAP_SIZE; +} + +static int get_eeprom_len(struct net_device *dev) +{ + return EEPROMSIZE; +} + +static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct adapter *adapter = netdev2adap(dev); + + strcpy(info->driver, KBUILD_MODNAME); + strcpy(info->version, DRV_VERSION); + strcpy(info->bus_info, pci_name(adapter->pdev)); + + if (!adapter->params.fw_vers) + strcpy(info->fw_version, "N/A"); + else + snprintf(info->fw_version, sizeof(info->fw_version), + "%u.%u.%u.%u, TP %u.%u.%u.%u", + FW_HDR_FW_VER_MAJOR_GET(adapter->params.fw_vers), + FW_HDR_FW_VER_MINOR_GET(adapter->params.fw_vers), + FW_HDR_FW_VER_MICRO_GET(adapter->params.fw_vers), + FW_HDR_FW_VER_BUILD_GET(adapter->params.fw_vers), + FW_HDR_FW_VER_MAJOR_GET(adapter->params.tp_vers), + FW_HDR_FW_VER_MINOR_GET(adapter->params.tp_vers), + FW_HDR_FW_VER_MICRO_GET(adapter->params.tp_vers), + FW_HDR_FW_VER_BUILD_GET(adapter->params.tp_vers)); +} + +static void get_strings(struct net_device *dev, u32 stringset, u8 *data) +{ + if (stringset == ETH_SS_STATS) + memcpy(data, stats_strings, sizeof(stats_strings)); +} + +/* + * port stats maintained per queue of the port. They should be in the same + * order as in stats_strings above. + */ +struct queue_port_stats { + u64 tso; + u64 tx_csum; + u64 rx_csum; + u64 vlan_ex; + u64 vlan_ins; + u64 gro_pkts; + u64 gro_merged; +}; + +static void collect_sge_port_stats(const struct adapter *adap, + const struct port_info *p, struct queue_port_stats *s) +{ + int i; + const struct sge_eth_txq *tx = &adap->sge.ethtxq[p->first_qset]; + const struct sge_eth_rxq *rx = &adap->sge.ethrxq[p->first_qset]; + + memset(s, 0, sizeof(*s)); + for (i = 0; i < p->nqsets; i++, rx++, tx++) { + s->tso += tx->tso; + s->tx_csum += tx->tx_cso; + s->rx_csum += rx->stats.rx_cso; + s->vlan_ex += rx->stats.vlan_ex; + s->vlan_ins += tx->vlan_ins; + s->gro_pkts += rx->stats.lro_pkts; + s->gro_merged += rx->stats.lro_merged; + } +} + +static void get_stats(struct net_device *dev, struct ethtool_stats *stats, + u64 *data) +{ + struct port_info *pi = netdev_priv(dev); + struct adapter *adapter = pi->adapter; + + t4_get_port_stats(adapter, pi->tx_chan, (struct port_stats *)data); + + data += sizeof(struct port_stats) / sizeof(u64); + collect_sge_port_stats(adapter, pi, (struct queue_port_stats *)data); +} + +/* + * Return a version number to identify the type of adapter. The scheme is: + * - bits 0..9: chip version + * - bits 10..15: chip revision + * - bits 16..23: register dump version + */ +static inline unsigned int mk_adap_vers(const struct adapter *ap) +{ + return 4 | (ap->params.rev << 10) | (1 << 16); +} + +static void reg_block_dump(struct adapter *ap, void *buf, unsigned int start, + unsigned int end) +{ + u32 *p = buf + start; + + for ( ; start <= end; start += sizeof(u32)) + *p++ = t4_read_reg(ap, start); +} + +static void get_regs(struct net_device *dev, struct ethtool_regs *regs, + void *buf) +{ + static const unsigned int reg_ranges[] = { + 0x1008, 0x1108, + 0x1180, 0x11b4, + 0x11fc, 0x123c, + 0x1300, 0x173c, + 0x1800, 0x18fc, + 0x3000, 0x30d8, + 0x30e0, 0x5924, + 0x5960, 0x59d4, + 0x5a00, 0x5af8, + 0x6000, 0x6098, + 0x6100, 0x6150, + 0x6200, 0x6208, + 0x6240, 0x6248, + 0x6280, 0x6338, + 0x6370, 0x638c, + 0x6400, 0x643c, + 0x6500, 0x6524, + 0x6a00, 0x6a38, + 0x6a60, 0x6a78, + 0x6b00, 0x6b84, + 0x6bf0, 0x6c84, + 0x6cf0, 0x6d84, + 0x6df0, 0x6e84, + 0x6ef0, 0x6f84, + 0x6ff0, 0x7084, + 0x70f0, 0x7184, + 0x71f0, 0x7284, + 0x72f0, 0x7384, + 0x73f0, 0x7450, + 0x7500, 0x7530, + 0x7600, 0x761c, + 0x7680, 0x76cc, + 0x7700, 0x7798, + 0x77c0, 0x77fc, + 0x7900, 0x79fc, + 0x7b00, 0x7c38, + 0x7d00, 0x7efc, + 0x8dc0, 0x8e1c, + 0x8e30, 0x8e78, + 0x8ea0, 0x8f6c, + 0x8fc0, 0x9074, + 0x90fc, 0x90fc, + 0x9400, 0x9458, + 0x9600, 0x96bc, + 0x9800, 0x9808, + 0x9820, 0x983c, + 0x9850, 0x9864, + 0x9c00, 0x9c6c, + 0x9c80, 0x9cec, + 0x9d00, 0x9d6c, + 0x9d80, 0x9dec, + 0x9e00, 0x9e6c, + 0x9e80, 0x9eec, + 0x9f00, 0x9f6c, + 0x9f80, 0x9fec, + 0xd004, 0xd03c, + 0xdfc0, 0xdfe0, + 0xe000, 0xea7c, + 0xf000, 0x11190, + 0x19040, 0x1906c, + 0x19078, 0x19080, + 0x1908c, 0x19124, + 0x19150, 0x191b0, + 0x191d0, 0x191e8, + 0x19238, 0x1924c, + 0x193f8, 0x19474, + 0x19490, 0x194f8, + 0x19800, 0x19f30, + 0x1a000, 0x1a06c, + 0x1a0b0, 0x1a120, + 0x1a128, 0x1a138, + 0x1a190, 0x1a1c4, + 0x1a1fc, 0x1a1fc, + 0x1e040, 0x1e04c, + 0x1e284, 0x1e28c, + 0x1e2c0, 0x1e2c0, + 0x1e2e0, 0x1e2e0, + 0x1e300, 0x1e384, + 0x1e3c0, 0x1e3c8, + 0x1e440, 0x1e44c, + 0x1e684, 0x1e68c, + 0x1e6c0, 0x1e6c0, + 0x1e6e0, 0x1e6e0, + 0x1e700, 0x1e784, + 0x1e7c0, 0x1e7c8, + 0x1e840, 0x1e84c, + 0x1ea84, 0x1ea8c, + 0x1eac0, 0x1eac0, + 0x1eae0, 0x1eae0, + 0x1eb00, 0x1eb84, + 0x1ebc0, 0x1ebc8, + 0x1ec40, 0x1ec4c, + 0x1ee84, 0x1ee8c, + 0x1eec0, 0x1eec0, + 0x1eee0, 0x1eee0, + 0x1ef00, 0x1ef84, + 0x1efc0, 0x1efc8, + 0x1f040, 0x1f04c, + 0x1f284, 0x1f28c, + 0x1f2c0, 0x1f2c0, + 0x1f2e0, 0x1f2e0, + 0x1f300, 0x1f384, + 0x1f3c0, 0x1f3c8, + 0x1f440, 0x1f44c, + 0x1f684, 0x1f68c, + 0x1f6c0, 0x1f6c0, + 0x1f6e0, 0x1f6e0, + 0x1f700, 0x1f784, + 0x1f7c0, 0x1f7c8, + 0x1f840, 0x1f84c, + 0x1fa84, 0x1fa8c, + 0x1fac0, 0x1fac0, + 0x1fae0, 0x1fae0, + 0x1fb00, 0x1fb84, + 0x1fbc0, 0x1fbc8, + 0x1fc40, 0x1fc4c, + 0x1fe84, 0x1fe8c, + 0x1fec0, 0x1fec0, + 0x1fee0, 0x1fee0, + 0x1ff00, 0x1ff84, + 0x1ffc0, 0x1ffc8, + 0x20000, 0x2002c, + 0x20100, 0x2013c, + 0x20190, 0x201c8, + 0x20200, 0x20318, + 0x20400, 0x20528, + 0x20540, 0x20614, + 0x21000, 0x21040, + 0x2104c, 0x21060, + 0x210c0, 0x210ec, + 0x21200, 0x21268, + 0x21270, 0x21284, + 0x212fc, 0x21388, + 0x21400, 0x21404, + 0x21500, 0x21518, + 0x2152c, 0x2153c, + 0x21550, 0x21554, + 0x21600, 0x21600, + 0x21608, 0x21628, + 0x21630, 0x2163c, + 0x21700, 0x2171c, + 0x21780, 0x2178c, + 0x21800, 0x21c38, + 0x21c80, 0x21d7c, + 0x21e00, 0x21e04, + 0x22000, 0x2202c, + 0x22100, 0x2213c, + 0x22190, 0x221c8, + 0x22200, 0x22318, + 0x22400, 0x22528, + 0x22540, 0x22614, + 0x23000, 0x23040, + 0x2304c, 0x23060, + 0x230c0, 0x230ec, + 0x23200, 0x23268, + 0x23270, 0x23284, + 0x232fc, 0x23388, + 0x23400, 0x23404, + 0x23500, 0x23518, + 0x2352c, 0x2353c, + 0x23550, 0x23554, + 0x23600, 0x23600, + 0x23608, 0x23628, + 0x23630, 0x2363c, + 0x23700, 0x2371c, + 0x23780, 0x2378c, + 0x23800, 0x23c38, + 0x23c80, 0x23d7c, + 0x23e00, 0x23e04, + 0x24000, 0x2402c, + 0x24100, 0x2413c, + 0x24190, 0x241c8, + 0x24200, 0x24318, + 0x24400, 0x24528, + 0x24540, 0x24614, + 0x25000, 0x25040, + 0x2504c, 0x25060, + 0x250c0, 0x250ec, + 0x25200, 0x25268, + 0x25270, 0x25284, + 0x252fc, 0x25388, + 0x25400, 0x25404, + 0x25500, 0x25518, + 0x2552c, 0x2553c, + 0x25550, 0x25554, + 0x25600, 0x25600, + 0x25608, 0x25628, + 0x25630, 0x2563c, + 0x25700, 0x2571c, + 0x25780, 0x2578c, + 0x25800, 0x25c38, + 0x25c80, 0x25d7c, + 0x25e00, 0x25e04, + 0x26000, 0x2602c, + 0x26100, 0x2613c, + 0x26190, 0x261c8, + 0x26200, 0x26318, + 0x26400, 0x26528, + 0x26540, 0x26614, + 0x27000, 0x27040, + 0x2704c, 0x27060, + 0x270c0, 0x270ec, + 0x27200, 0x27268, + 0x27270, 0x27284, + 0x272fc, 0x27388, + 0x27400, 0x27404, + 0x27500, 0x27518, + 0x2752c, 0x2753c, + 0x27550, 0x27554, + 0x27600, 0x27600, + 0x27608, 0x27628, + 0x27630, 0x2763c, + 0x27700, 0x2771c, + 0x27780, 0x2778c, + 0x27800, 0x27c38, + 0x27c80, 0x27d7c, + 0x27e00, 0x27e04 + }; + + int i; + struct adapter *ap = netdev2adap(dev); + + regs->version = mk_adap_vers(ap); + + memset(buf, 0, T4_REGMAP_SIZE); + for (i = 0; i < ARRAY_SIZE(reg_ranges); i += 2) + reg_block_dump(ap, buf, reg_ranges[i], reg_ranges[i + 1]); +} + +static int restart_autoneg(struct net_device *dev) +{ + struct port_info *p = netdev_priv(dev); + + if (!netif_running(dev)) + return -EAGAIN; + if (p->link_cfg.autoneg != AUTONEG_ENABLE) + return -EINVAL; + t4_restart_aneg(p->adapter, p->adapter->fn, p->tx_chan); + return 0; +} + +static int identify_port(struct net_device *dev, + enum ethtool_phys_id_state state) +{ + unsigned int val; + struct adapter *adap = netdev2adap(dev); + + if (state == ETHTOOL_ID_ACTIVE) + val = 0xffff; + else if (state == ETHTOOL_ID_INACTIVE) + val = 0; + else + return -EINVAL; + + return t4_identify_port(adap, adap->fn, netdev2pinfo(dev)->viid, val); +} + +static unsigned int from_fw_linkcaps(unsigned int type, unsigned int caps) +{ + unsigned int v = 0; + + if (type == FW_PORT_TYPE_BT_SGMII || type == FW_PORT_TYPE_BT_XFI || + type == FW_PORT_TYPE_BT_XAUI) { + v |= SUPPORTED_TP; + if (caps & FW_PORT_CAP_SPEED_100M) + v |= SUPPORTED_100baseT_Full; + if (caps & FW_PORT_CAP_SPEED_1G) + v |= SUPPORTED_1000baseT_Full; + if (caps & FW_PORT_CAP_SPEED_10G) + v |= SUPPORTED_10000baseT_Full; + } else if (type == FW_PORT_TYPE_KX4 || type == FW_PORT_TYPE_KX) { + v |= SUPPORTED_Backplane; + if (caps & FW_PORT_CAP_SPEED_1G) + v |= SUPPORTED_1000baseKX_Full; + if (caps & FW_PORT_CAP_SPEED_10G) + v |= SUPPORTED_10000baseKX4_Full; + } else if (type == FW_PORT_TYPE_KR) + v |= SUPPORTED_Backplane | SUPPORTED_10000baseKR_Full; + else if (type == FW_PORT_TYPE_BP_AP) + v |= SUPPORTED_Backplane | SUPPORTED_10000baseR_FEC | + SUPPORTED_10000baseKR_Full | SUPPORTED_1000baseKX_Full; + else if (type == FW_PORT_TYPE_BP4_AP) + v |= SUPPORTED_Backplane | SUPPORTED_10000baseR_FEC | + SUPPORTED_10000baseKR_Full | SUPPORTED_1000baseKX_Full | + SUPPORTED_10000baseKX4_Full; + else if (type == FW_PORT_TYPE_FIBER_XFI || + type == FW_PORT_TYPE_FIBER_XAUI || type == FW_PORT_TYPE_SFP) + v |= SUPPORTED_FIBRE; + + if (caps & FW_PORT_CAP_ANEG) + v |= SUPPORTED_Autoneg; + return v; +} + +static unsigned int to_fw_linkcaps(unsigned int caps) +{ + unsigned int v = 0; + + if (caps & ADVERTISED_100baseT_Full) + v |= FW_PORT_CAP_SPEED_100M; + if (caps & ADVERTISED_1000baseT_Full) + v |= FW_PORT_CAP_SPEED_1G; + if (caps & ADVERTISED_10000baseT_Full) + v |= FW_PORT_CAP_SPEED_10G; + return v; +} + +static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + const struct port_info *p = netdev_priv(dev); + + if (p->port_type == FW_PORT_TYPE_BT_SGMII || + p->port_type == FW_PORT_TYPE_BT_XFI || + p->port_type == FW_PORT_TYPE_BT_XAUI) + cmd->port = PORT_TP; + else if (p->port_type == FW_PORT_TYPE_FIBER_XFI || + p->port_type == FW_PORT_TYPE_FIBER_XAUI) + cmd->port = PORT_FIBRE; + else if (p->port_type == FW_PORT_TYPE_SFP) { + if (p->mod_type == FW_PORT_MOD_TYPE_TWINAX_PASSIVE || + p->mod_type == FW_PORT_MOD_TYPE_TWINAX_ACTIVE) + cmd->port = PORT_DA; + else + cmd->port = PORT_FIBRE; + } else + cmd->port = PORT_OTHER; + + if (p->mdio_addr >= 0) { + cmd->phy_address = p->mdio_addr; + cmd->transceiver = XCVR_EXTERNAL; + cmd->mdio_support = p->port_type == FW_PORT_TYPE_BT_SGMII ? + MDIO_SUPPORTS_C22 : MDIO_SUPPORTS_C45; + } else { + cmd->phy_address = 0; /* not really, but no better option */ + cmd->transceiver = XCVR_INTERNAL; + cmd->mdio_support = 0; + } + + cmd->supported = from_fw_linkcaps(p->port_type, p->link_cfg.supported); + cmd->advertising = from_fw_linkcaps(p->port_type, + p->link_cfg.advertising); + ethtool_cmd_speed_set(cmd, + netif_carrier_ok(dev) ? p->link_cfg.speed : 0); + cmd->duplex = DUPLEX_FULL; + cmd->autoneg = p->link_cfg.autoneg; + cmd->maxtxpkt = 0; + cmd->maxrxpkt = 0; + return 0; +} + +static unsigned int speed_to_caps(int speed) +{ + if (speed == SPEED_100) + return FW_PORT_CAP_SPEED_100M; + if (speed == SPEED_1000) + return FW_PORT_CAP_SPEED_1G; + if (speed == SPEED_10000) + return FW_PORT_CAP_SPEED_10G; + return 0; +} + +static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + unsigned int cap; + struct port_info *p = netdev_priv(dev); + struct link_config *lc = &p->link_cfg; + u32 speed = ethtool_cmd_speed(cmd); + + if (cmd->duplex != DUPLEX_FULL) /* only full-duplex supported */ + return -EINVAL; + + if (!(lc->supported & FW_PORT_CAP_ANEG)) { + /* + * PHY offers a single speed. See if that's what's + * being requested. + */ + if (cmd->autoneg == AUTONEG_DISABLE && + (lc->supported & speed_to_caps(speed))) + return 0; + return -EINVAL; + } + + if (cmd->autoneg == AUTONEG_DISABLE) { + cap = speed_to_caps(speed); + + if (!(lc->supported & cap) || (speed == SPEED_1000) || + (speed == SPEED_10000)) + return -EINVAL; + lc->requested_speed = cap; + lc->advertising = 0; + } else { + cap = to_fw_linkcaps(cmd->advertising); + if (!(lc->supported & cap)) + return -EINVAL; + lc->requested_speed = 0; + lc->advertising = cap | FW_PORT_CAP_ANEG; + } + lc->autoneg = cmd->autoneg; + + if (netif_running(dev)) + return t4_link_start(p->adapter, p->adapter->fn, p->tx_chan, + lc); + return 0; +} + +static void get_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *epause) +{ + struct port_info *p = netdev_priv(dev); + + epause->autoneg = (p->link_cfg.requested_fc & PAUSE_AUTONEG) != 0; + epause->rx_pause = (p->link_cfg.fc & PAUSE_RX) != 0; + epause->tx_pause = (p->link_cfg.fc & PAUSE_TX) != 0; +} + +static int set_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *epause) +{ + struct port_info *p = netdev_priv(dev); + struct link_config *lc = &p->link_cfg; + + if (epause->autoneg == AUTONEG_DISABLE) + lc->requested_fc = 0; + else if (lc->supported & FW_PORT_CAP_ANEG) + lc->requested_fc = PAUSE_AUTONEG; + else + return -EINVAL; + + if (epause->rx_pause) + lc->requested_fc |= PAUSE_RX; + if (epause->tx_pause) + lc->requested_fc |= PAUSE_TX; + if (netif_running(dev)) + return t4_link_start(p->adapter, p->adapter->fn, p->tx_chan, + lc); + return 0; +} + +static void get_sge_param(struct net_device *dev, struct ethtool_ringparam *e) +{ + const struct port_info *pi = netdev_priv(dev); + const struct sge *s = &pi->adapter->sge; + + e->rx_max_pending = MAX_RX_BUFFERS; + e->rx_mini_max_pending = MAX_RSPQ_ENTRIES; + e->rx_jumbo_max_pending = 0; + e->tx_max_pending = MAX_TXQ_ENTRIES; + + e->rx_pending = s->ethrxq[pi->first_qset].fl.size - 8; + e->rx_mini_pending = s->ethrxq[pi->first_qset].rspq.size; + e->rx_jumbo_pending = 0; + e->tx_pending = s->ethtxq[pi->first_qset].q.size; +} + +static int set_sge_param(struct net_device *dev, struct ethtool_ringparam *e) +{ + int i; + const struct port_info *pi = netdev_priv(dev); + struct adapter *adapter = pi->adapter; + struct sge *s = &adapter->sge; + + if (e->rx_pending > MAX_RX_BUFFERS || e->rx_jumbo_pending || + e->tx_pending > MAX_TXQ_ENTRIES || + e->rx_mini_pending > MAX_RSPQ_ENTRIES || + e->rx_mini_pending < MIN_RSPQ_ENTRIES || + e->rx_pending < MIN_FL_ENTRIES || e->tx_pending < MIN_TXQ_ENTRIES) + return -EINVAL; + + if (adapter->flags & FULL_INIT_DONE) + return -EBUSY; + + for (i = 0; i < pi->nqsets; ++i) { + s->ethtxq[pi->first_qset + i].q.size = e->tx_pending; + s->ethrxq[pi->first_qset + i].fl.size = e->rx_pending + 8; + s->ethrxq[pi->first_qset + i].rspq.size = e->rx_mini_pending; + } + return 0; +} + +static int closest_timer(const struct sge *s, int time) +{ + int i, delta, match = 0, min_delta = INT_MAX; + + for (i = 0; i < ARRAY_SIZE(s->timer_val); i++) { + delta = time - s->timer_val[i]; + if (delta < 0) + delta = -delta; + if (delta < min_delta) { + min_delta = delta; + match = i; + } + } + return match; +} + +static int closest_thres(const struct sge *s, int thres) +{ + int i, delta, match = 0, min_delta = INT_MAX; + + for (i = 0; i < ARRAY_SIZE(s->counter_val); i++) { + delta = thres - s->counter_val[i]; + if (delta < 0) + delta = -delta; + if (delta < min_delta) { + min_delta = delta; + match = i; + } + } + return match; +} + +/* + * Return a queue's interrupt hold-off time in us. 0 means no timer. + */ +static unsigned int qtimer_val(const struct adapter *adap, + const struct sge_rspq *q) +{ + unsigned int idx = q->intr_params >> 1; + + return idx < SGE_NTIMERS ? adap->sge.timer_val[idx] : 0; +} + +/** + * set_rxq_intr_params - set a queue's interrupt holdoff parameters + * @adap: the adapter + * @q: the Rx queue + * @us: the hold-off time in us, or 0 to disable timer + * @cnt: the hold-off packet count, or 0 to disable counter + * + * Sets an Rx queue's interrupt hold-off time and packet count. At least + * one of the two needs to be enabled for the queue to generate interrupts. + */ +static int set_rxq_intr_params(struct adapter *adap, struct sge_rspq *q, + unsigned int us, unsigned int cnt) +{ + if ((us | cnt) == 0) + cnt = 1; + + if (cnt) { + int err; + u32 v, new_idx; + + new_idx = closest_thres(&adap->sge, cnt); + if (q->desc && q->pktcnt_idx != new_idx) { + /* the queue has already been created, update it */ + v = FW_PARAMS_MNEM(FW_PARAMS_MNEM_DMAQ) | + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DMAQ_IQ_INTCNTTHRESH) | + FW_PARAMS_PARAM_YZ(q->cntxt_id); + err = t4_set_params(adap, adap->fn, adap->fn, 0, 1, &v, + &new_idx); + if (err) + return err; + } + q->pktcnt_idx = new_idx; + } + + us = us == 0 ? 6 : closest_timer(&adap->sge, us); + q->intr_params = QINTR_TIMER_IDX(us) | (cnt > 0 ? QINTR_CNT_EN : 0); + return 0; +} + +static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c) +{ + const struct port_info *pi = netdev_priv(dev); + struct adapter *adap = pi->adapter; + + return set_rxq_intr_params(adap, &adap->sge.ethrxq[pi->first_qset].rspq, + c->rx_coalesce_usecs, c->rx_max_coalesced_frames); +} + +static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c) +{ + const struct port_info *pi = netdev_priv(dev); + const struct adapter *adap = pi->adapter; + const struct sge_rspq *rq = &adap->sge.ethrxq[pi->first_qset].rspq; + + c->rx_coalesce_usecs = qtimer_val(adap, rq); + c->rx_max_coalesced_frames = (rq->intr_params & QINTR_CNT_EN) ? + adap->sge.counter_val[rq->pktcnt_idx] : 0; + return 0; +} + +/** + * eeprom_ptov - translate a physical EEPROM address to virtual + * @phys_addr: the physical EEPROM address + * @fn: the PCI function number + * @sz: size of function-specific area + * + * Translate a physical EEPROM address to virtual. The first 1K is + * accessed through virtual addresses starting at 31K, the rest is + * accessed through virtual addresses starting at 0. + * + * The mapping is as follows: + * [0..1K) -> [31K..32K) + * [1K..1K+A) -> [31K-A..31K) + * [1K+A..ES) -> [0..ES-A-1K) + * + * where A = @fn * @sz, and ES = EEPROM size. + */ +static int eeprom_ptov(unsigned int phys_addr, unsigned int fn, unsigned int sz) +{ + fn *= sz; + if (phys_addr < 1024) + return phys_addr + (31 << 10); + if (phys_addr < 1024 + fn) + return 31744 - fn + phys_addr - 1024; + if (phys_addr < EEPROMSIZE) + return phys_addr - 1024 - fn; + return -EINVAL; +} + +/* + * The next two routines implement eeprom read/write from physical addresses. + */ +static int eeprom_rd_phys(struct adapter *adap, unsigned int phys_addr, u32 *v) +{ + int vaddr = eeprom_ptov(phys_addr, adap->fn, EEPROMPFSIZE); + + if (vaddr >= 0) + vaddr = pci_read_vpd(adap->pdev, vaddr, sizeof(u32), v); + return vaddr < 0 ? vaddr : 0; +} + +static int eeprom_wr_phys(struct adapter *adap, unsigned int phys_addr, u32 v) +{ + int vaddr = eeprom_ptov(phys_addr, adap->fn, EEPROMPFSIZE); + + if (vaddr >= 0) + vaddr = pci_write_vpd(adap->pdev, vaddr, sizeof(u32), &v); + return vaddr < 0 ? vaddr : 0; +} + +#define EEPROM_MAGIC 0x38E2F10C + +static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *e, + u8 *data) +{ + int i, err = 0; + struct adapter *adapter = netdev2adap(dev); + + u8 *buf = kmalloc(EEPROMSIZE, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + e->magic = EEPROM_MAGIC; + for (i = e->offset & ~3; !err && i < e->offset + e->len; i += 4) + err = eeprom_rd_phys(adapter, i, (u32 *)&buf[i]); + + if (!err) + memcpy(data, buf + e->offset, e->len); + kfree(buf); + return err; +} + +static int set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, + u8 *data) +{ + u8 *buf; + int err = 0; + u32 aligned_offset, aligned_len, *p; + struct adapter *adapter = netdev2adap(dev); + + if (eeprom->magic != EEPROM_MAGIC) + return -EINVAL; + + aligned_offset = eeprom->offset & ~3; + aligned_len = (eeprom->len + (eeprom->offset & 3) + 3) & ~3; + + if (adapter->fn > 0) { + u32 start = 1024 + adapter->fn * EEPROMPFSIZE; + + if (aligned_offset < start || + aligned_offset + aligned_len > start + EEPROMPFSIZE) + return -EPERM; + } + + if (aligned_offset != eeprom->offset || aligned_len != eeprom->len) { + /* + * RMW possibly needed for first or last words. + */ + buf = kmalloc(aligned_len, GFP_KERNEL); + if (!buf) + return -ENOMEM; + err = eeprom_rd_phys(adapter, aligned_offset, (u32 *)buf); + if (!err && aligned_len > 4) + err = eeprom_rd_phys(adapter, + aligned_offset + aligned_len - 4, + (u32 *)&buf[aligned_len - 4]); + if (err) + goto out; + memcpy(buf + (eeprom->offset & 3), data, eeprom->len); + } else + buf = data; + + err = t4_seeprom_wp(adapter, false); + if (err) + goto out; + + for (p = (u32 *)buf; !err && aligned_len; aligned_len -= 4, p++) { + err = eeprom_wr_phys(adapter, aligned_offset, *p); + aligned_offset += 4; + } + + if (!err) + err = t4_seeprom_wp(adapter, true); +out: + if (buf != data) + kfree(buf); + return err; +} + +static int set_flash(struct net_device *netdev, struct ethtool_flash *ef) +{ + int ret; + const struct firmware *fw; + struct adapter *adap = netdev2adap(netdev); + + ef->data[sizeof(ef->data) - 1] = '\0'; + ret = request_firmware(&fw, ef->data, adap->pdev_dev); + if (ret < 0) + return ret; + + ret = t4_load_fw(adap, fw->data, fw->size); + release_firmware(fw); + if (!ret) + dev_info(adap->pdev_dev, "loaded firmware %s\n", ef->data); + return ret; +} + +#define WOL_SUPPORTED (WAKE_BCAST | WAKE_MAGIC) +#define BCAST_CRC 0xa0ccc1a6 + +static void get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + wol->supported = WAKE_BCAST | WAKE_MAGIC; + wol->wolopts = netdev2adap(dev)->wol; + memset(&wol->sopass, 0, sizeof(wol->sopass)); +} + +static int set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + int err = 0; + struct port_info *pi = netdev_priv(dev); + + if (wol->wolopts & ~WOL_SUPPORTED) + return -EINVAL; + t4_wol_magic_enable(pi->adapter, pi->tx_chan, + (wol->wolopts & WAKE_MAGIC) ? dev->dev_addr : NULL); + if (wol->wolopts & WAKE_BCAST) { + err = t4_wol_pat_enable(pi->adapter, pi->tx_chan, 0xfe, ~0ULL, + ~0ULL, 0, false); + if (!err) + err = t4_wol_pat_enable(pi->adapter, pi->tx_chan, 1, + ~6ULL, ~0ULL, BCAST_CRC, true); + } else + t4_wol_pat_enable(pi->adapter, pi->tx_chan, 0, 0, 0, 0, false); + return err; +} + +static int cxgb_set_features(struct net_device *dev, u32 features) +{ + const struct port_info *pi = netdev_priv(dev); + u32 changed = dev->features ^ features; + int err; + + if (!(changed & NETIF_F_HW_VLAN_RX)) + return 0; + + err = t4_set_rxmode(pi->adapter, pi->adapter->fn, pi->viid, -1, + -1, -1, -1, + !!(features & NETIF_F_HW_VLAN_RX), true); + if (unlikely(err)) + dev->features = features ^ NETIF_F_HW_VLAN_RX; + return err; +} + +static int get_rss_table(struct net_device *dev, struct ethtool_rxfh_indir *p) +{ + const struct port_info *pi = netdev_priv(dev); + unsigned int n = min_t(unsigned int, p->size, pi->rss_size); + + p->size = pi->rss_size; + while (n--) + p->ring_index[n] = pi->rss[n]; + return 0; +} + +static int set_rss_table(struct net_device *dev, + const struct ethtool_rxfh_indir *p) +{ + unsigned int i; + struct port_info *pi = netdev_priv(dev); + + if (p->size != pi->rss_size) + return -EINVAL; + for (i = 0; i < p->size; i++) + if (p->ring_index[i] >= pi->nqsets) + return -EINVAL; + for (i = 0; i < p->size; i++) + pi->rss[i] = p->ring_index[i]; + if (pi->adapter->flags & FULL_INIT_DONE) + return write_rss(pi, pi->rss); + return 0; +} + +static int get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info, + u32 *rules) +{ + const struct port_info *pi = netdev_priv(dev); + + switch (info->cmd) { + case ETHTOOL_GRXFH: { + unsigned int v = pi->rss_mode; + + info->data = 0; + switch (info->flow_type) { + case TCP_V4_FLOW: + if (v & FW_RSS_VI_CONFIG_CMD_IP4FOURTUPEN) + info->data = RXH_IP_SRC | RXH_IP_DST | + RXH_L4_B_0_1 | RXH_L4_B_2_3; + else if (v & FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN) + info->data = RXH_IP_SRC | RXH_IP_DST; + break; + case UDP_V4_FLOW: + if ((v & FW_RSS_VI_CONFIG_CMD_IP4FOURTUPEN) && + (v & FW_RSS_VI_CONFIG_CMD_UDPEN)) + info->data = RXH_IP_SRC | RXH_IP_DST | + RXH_L4_B_0_1 | RXH_L4_B_2_3; + else if (v & FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN) + info->data = RXH_IP_SRC | RXH_IP_DST; + break; + case SCTP_V4_FLOW: + case AH_ESP_V4_FLOW: + case IPV4_FLOW: + if (v & FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN) + info->data = RXH_IP_SRC | RXH_IP_DST; + break; + case TCP_V6_FLOW: + if (v & FW_RSS_VI_CONFIG_CMD_IP6FOURTUPEN) + info->data = RXH_IP_SRC | RXH_IP_DST | + RXH_L4_B_0_1 | RXH_L4_B_2_3; + else if (v & FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN) + info->data = RXH_IP_SRC | RXH_IP_DST; + break; + case UDP_V6_FLOW: + if ((v & FW_RSS_VI_CONFIG_CMD_IP6FOURTUPEN) && + (v & FW_RSS_VI_CONFIG_CMD_UDPEN)) + info->data = RXH_IP_SRC | RXH_IP_DST | + RXH_L4_B_0_1 | RXH_L4_B_2_3; + else if (v & FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN) + info->data = RXH_IP_SRC | RXH_IP_DST; + break; + case SCTP_V6_FLOW: + case AH_ESP_V6_FLOW: + case IPV6_FLOW: + if (v & FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN) + info->data = RXH_IP_SRC | RXH_IP_DST; + break; + } + return 0; + } + case ETHTOOL_GRXRINGS: + info->data = pi->nqsets; + return 0; + } + return -EOPNOTSUPP; +} + +static struct ethtool_ops cxgb_ethtool_ops = { + .get_settings = get_settings, + .set_settings = set_settings, + .get_drvinfo = get_drvinfo, + .get_msglevel = get_msglevel, + .set_msglevel = set_msglevel, + .get_ringparam = get_sge_param, + .set_ringparam = set_sge_param, + .get_coalesce = get_coalesce, + .set_coalesce = set_coalesce, + .get_eeprom_len = get_eeprom_len, + .get_eeprom = get_eeprom, + .set_eeprom = set_eeprom, + .get_pauseparam = get_pauseparam, + .set_pauseparam = set_pauseparam, + .get_link = ethtool_op_get_link, + .get_strings = get_strings, + .set_phys_id = identify_port, + .nway_reset = restart_autoneg, + .get_sset_count = get_sset_count, + .get_ethtool_stats = get_stats, + .get_regs_len = get_regs_len, + .get_regs = get_regs, + .get_wol = get_wol, + .set_wol = set_wol, + .get_rxnfc = get_rxnfc, + .get_rxfh_indir = get_rss_table, + .set_rxfh_indir = set_rss_table, + .flash_device = set_flash, +}; + +/* + * debugfs support + */ + +static int mem_open(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + +static ssize_t mem_read(struct file *file, char __user *buf, size_t count, + loff_t *ppos) +{ + loff_t pos = *ppos; + loff_t avail = file->f_path.dentry->d_inode->i_size; + unsigned int mem = (uintptr_t)file->private_data & 3; + struct adapter *adap = file->private_data - mem; + + if (pos < 0) + return -EINVAL; + if (pos >= avail) + return 0; + if (count > avail - pos) + count = avail - pos; + + while (count) { + size_t len; + int ret, ofst; + __be32 data[16]; + + if (mem == MEM_MC) + ret = t4_mc_read(adap, pos, data, NULL); + else + ret = t4_edc_read(adap, mem, pos, data, NULL); + if (ret) + return ret; + + ofst = pos % sizeof(data); + len = min(count, sizeof(data) - ofst); + if (copy_to_user(buf, (u8 *)data + ofst, len)) + return -EFAULT; + + buf += len; + pos += len; + count -= len; + } + count = pos - *ppos; + *ppos = pos; + return count; +} + +static const struct file_operations mem_debugfs_fops = { + .owner = THIS_MODULE, + .open = mem_open, + .read = mem_read, + .llseek = default_llseek, +}; + +static void __devinit add_debugfs_mem(struct adapter *adap, const char *name, + unsigned int idx, unsigned int size_mb) +{ + struct dentry *de; + + de = debugfs_create_file(name, S_IRUSR, adap->debugfs_root, + (void *)adap + idx, &mem_debugfs_fops); + if (de && de->d_inode) + de->d_inode->i_size = size_mb << 20; +} + +static int __devinit setup_debugfs(struct adapter *adap) +{ + int i; + + if (IS_ERR_OR_NULL(adap->debugfs_root)) + return -1; + + i = t4_read_reg(adap, MA_TARGET_MEM_ENABLE); + if (i & EDRAM0_ENABLE) + add_debugfs_mem(adap, "edc0", MEM_EDC0, 5); + if (i & EDRAM1_ENABLE) + add_debugfs_mem(adap, "edc1", MEM_EDC1, 5); + if (i & EXT_MEM_ENABLE) + add_debugfs_mem(adap, "mc", MEM_MC, + EXT_MEM_SIZE_GET(t4_read_reg(adap, MA_EXT_MEMORY_BAR))); + if (adap->l2t) + debugfs_create_file("l2t", S_IRUSR, adap->debugfs_root, adap, + &t4_l2t_fops); + return 0; +} + +/* + * upper-layer driver support + */ + +/* + * Allocate an active-open TID and set it to the supplied value. + */ +int cxgb4_alloc_atid(struct tid_info *t, void *data) +{ + int atid = -1; + + spin_lock_bh(&t->atid_lock); + if (t->afree) { + union aopen_entry *p = t->afree; + + atid = p - t->atid_tab; + t->afree = p->next; + p->data = data; + t->atids_in_use++; + } + spin_unlock_bh(&t->atid_lock); + return atid; +} +EXPORT_SYMBOL(cxgb4_alloc_atid); + +/* + * Release an active-open TID. + */ +void cxgb4_free_atid(struct tid_info *t, unsigned int atid) +{ + union aopen_entry *p = &t->atid_tab[atid]; + + spin_lock_bh(&t->atid_lock); + p->next = t->afree; + t->afree = p; + t->atids_in_use--; + spin_unlock_bh(&t->atid_lock); +} +EXPORT_SYMBOL(cxgb4_free_atid); + +/* + * Allocate a server TID and set it to the supplied value. + */ +int cxgb4_alloc_stid(struct tid_info *t, int family, void *data) +{ + int stid; + + spin_lock_bh(&t->stid_lock); + if (family == PF_INET) { + stid = find_first_zero_bit(t->stid_bmap, t->nstids); + if (stid < t->nstids) + __set_bit(stid, t->stid_bmap); + else + stid = -1; + } else { + stid = bitmap_find_free_region(t->stid_bmap, t->nstids, 2); + if (stid < 0) + stid = -1; + } + if (stid >= 0) { + t->stid_tab[stid].data = data; + stid += t->stid_base; + t->stids_in_use++; + } + spin_unlock_bh(&t->stid_lock); + return stid; +} +EXPORT_SYMBOL(cxgb4_alloc_stid); + +/* + * Release a server TID. + */ +void cxgb4_free_stid(struct tid_info *t, unsigned int stid, int family) +{ + stid -= t->stid_base; + spin_lock_bh(&t->stid_lock); + if (family == PF_INET) + __clear_bit(stid, t->stid_bmap); + else + bitmap_release_region(t->stid_bmap, stid, 2); + t->stid_tab[stid].data = NULL; + t->stids_in_use--; + spin_unlock_bh(&t->stid_lock); +} +EXPORT_SYMBOL(cxgb4_free_stid); + +/* + * Populate a TID_RELEASE WR. Caller must properly size the skb. + */ +static void mk_tid_release(struct sk_buff *skb, unsigned int chan, + unsigned int tid) +{ + struct cpl_tid_release *req; + + set_wr_txq(skb, CPL_PRIORITY_SETUP, chan); + req = (struct cpl_tid_release *)__skb_put(skb, sizeof(*req)); + INIT_TP_WR(req, tid); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_TID_RELEASE, tid)); +} + +/* + * Queue a TID release request and if necessary schedule a work queue to + * process it. + */ +static void cxgb4_queue_tid_release(struct tid_info *t, unsigned int chan, + unsigned int tid) +{ + void **p = &t->tid_tab[tid]; + struct adapter *adap = container_of(t, struct adapter, tids); + + spin_lock_bh(&adap->tid_release_lock); + *p = adap->tid_release_head; + /* Low 2 bits encode the Tx channel number */ + adap->tid_release_head = (void **)((uintptr_t)p | chan); + if (!adap->tid_release_task_busy) { + adap->tid_release_task_busy = true; + schedule_work(&adap->tid_release_task); + } + spin_unlock_bh(&adap->tid_release_lock); +} + +/* + * Process the list of pending TID release requests. + */ +static void process_tid_release_list(struct work_struct *work) +{ + struct sk_buff *skb; + struct adapter *adap; + + adap = container_of(work, struct adapter, tid_release_task); + + spin_lock_bh(&adap->tid_release_lock); + while (adap->tid_release_head) { + void **p = adap->tid_release_head; + unsigned int chan = (uintptr_t)p & 3; + p = (void *)p - chan; + + adap->tid_release_head = *p; + *p = NULL; + spin_unlock_bh(&adap->tid_release_lock); + + while (!(skb = alloc_skb(sizeof(struct cpl_tid_release), + GFP_KERNEL))) + schedule_timeout_uninterruptible(1); + + mk_tid_release(skb, chan, p - adap->tids.tid_tab); + t4_ofld_send(adap, skb); + spin_lock_bh(&adap->tid_release_lock); + } + adap->tid_release_task_busy = false; + spin_unlock_bh(&adap->tid_release_lock); +} + +/* + * Release a TID and inform HW. If we are unable to allocate the release + * message we defer to a work queue. + */ +void cxgb4_remove_tid(struct tid_info *t, unsigned int chan, unsigned int tid) +{ + void *old; + struct sk_buff *skb; + struct adapter *adap = container_of(t, struct adapter, tids); + + old = t->tid_tab[tid]; + skb = alloc_skb(sizeof(struct cpl_tid_release), GFP_ATOMIC); + if (likely(skb)) { + t->tid_tab[tid] = NULL; + mk_tid_release(skb, chan, tid); + t4_ofld_send(adap, skb); + } else + cxgb4_queue_tid_release(t, chan, tid); + if (old) + atomic_dec(&t->tids_in_use); +} +EXPORT_SYMBOL(cxgb4_remove_tid); + +/* + * Allocate and initialize the TID tables. Returns 0 on success. + */ +static int tid_init(struct tid_info *t) +{ + size_t size; + unsigned int natids = t->natids; + + size = t->ntids * sizeof(*t->tid_tab) + natids * sizeof(*t->atid_tab) + + t->nstids * sizeof(*t->stid_tab) + + BITS_TO_LONGS(t->nstids) * sizeof(long); + t->tid_tab = t4_alloc_mem(size); + if (!t->tid_tab) + return -ENOMEM; + + t->atid_tab = (union aopen_entry *)&t->tid_tab[t->ntids]; + t->stid_tab = (struct serv_entry *)&t->atid_tab[natids]; + t->stid_bmap = (unsigned long *)&t->stid_tab[t->nstids]; + spin_lock_init(&t->stid_lock); + spin_lock_init(&t->atid_lock); + + t->stids_in_use = 0; + t->afree = NULL; + t->atids_in_use = 0; + atomic_set(&t->tids_in_use, 0); + + /* Setup the free list for atid_tab and clear the stid bitmap. */ + if (natids) { + while (--natids) + t->atid_tab[natids - 1].next = &t->atid_tab[natids]; + t->afree = t->atid_tab; + } + bitmap_zero(t->stid_bmap, t->nstids); + return 0; +} + +/** + * cxgb4_create_server - create an IP server + * @dev: the device + * @stid: the server TID + * @sip: local IP address to bind server to + * @sport: the server's TCP port + * @queue: queue to direct messages from this server to + * + * Create an IP server for the given port and address. + * Returns <0 on error and one of the %NET_XMIT_* values on success. + */ +int cxgb4_create_server(const struct net_device *dev, unsigned int stid, + __be32 sip, __be16 sport, unsigned int queue) +{ + unsigned int chan; + struct sk_buff *skb; + struct adapter *adap; + struct cpl_pass_open_req *req; + + skb = alloc_skb(sizeof(*req), GFP_KERNEL); + if (!skb) + return -ENOMEM; + + adap = netdev2adap(dev); + req = (struct cpl_pass_open_req *)__skb_put(skb, sizeof(*req)); + INIT_TP_WR(req, 0); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_PASS_OPEN_REQ, stid)); + req->local_port = sport; + req->peer_port = htons(0); + req->local_ip = sip; + req->peer_ip = htonl(0); + chan = rxq_to_chan(&adap->sge, queue); + req->opt0 = cpu_to_be64(TX_CHAN(chan)); + req->opt1 = cpu_to_be64(CONN_POLICY_ASK | + SYN_RSS_ENABLE | SYN_RSS_QUEUE(queue)); + return t4_mgmt_tx(adap, skb); +} +EXPORT_SYMBOL(cxgb4_create_server); + +/** + * cxgb4_best_mtu - find the entry in the MTU table closest to an MTU + * @mtus: the HW MTU table + * @mtu: the target MTU + * @idx: index of selected entry in the MTU table + * + * Returns the index and the value in the HW MTU table that is closest to + * but does not exceed @mtu, unless @mtu is smaller than any value in the + * table, in which case that smallest available value is selected. + */ +unsigned int cxgb4_best_mtu(const unsigned short *mtus, unsigned short mtu, + unsigned int *idx) +{ + unsigned int i = 0; + + while (i < NMTUS - 1 && mtus[i + 1] <= mtu) + ++i; + if (idx) + *idx = i; + return mtus[i]; +} +EXPORT_SYMBOL(cxgb4_best_mtu); + +/** + * cxgb4_port_chan - get the HW channel of a port + * @dev: the net device for the port + * + * Return the HW Tx channel of the given port. + */ +unsigned int cxgb4_port_chan(const struct net_device *dev) +{ + return netdev2pinfo(dev)->tx_chan; +} +EXPORT_SYMBOL(cxgb4_port_chan); + +/** + * cxgb4_port_viid - get the VI id of a port + * @dev: the net device for the port + * + * Return the VI id of the given port. + */ +unsigned int cxgb4_port_viid(const struct net_device *dev) +{ + return netdev2pinfo(dev)->viid; +} +EXPORT_SYMBOL(cxgb4_port_viid); + +/** + * cxgb4_port_idx - get the index of a port + * @dev: the net device for the port + * + * Return the index of the given port. + */ +unsigned int cxgb4_port_idx(const struct net_device *dev) +{ + return netdev2pinfo(dev)->port_id; +} +EXPORT_SYMBOL(cxgb4_port_idx); + +void cxgb4_get_tcp_stats(struct pci_dev *pdev, struct tp_tcp_stats *v4, + struct tp_tcp_stats *v6) +{ + struct adapter *adap = pci_get_drvdata(pdev); + + spin_lock(&adap->stats_lock); + t4_tp_get_tcp_stats(adap, v4, v6); + spin_unlock(&adap->stats_lock); +} +EXPORT_SYMBOL(cxgb4_get_tcp_stats); + +void cxgb4_iscsi_init(struct net_device *dev, unsigned int tag_mask, + const unsigned int *pgsz_order) +{ + struct adapter *adap = netdev2adap(dev); + + t4_write_reg(adap, ULP_RX_ISCSI_TAGMASK, tag_mask); + t4_write_reg(adap, ULP_RX_ISCSI_PSZ, HPZ0(pgsz_order[0]) | + HPZ1(pgsz_order[1]) | HPZ2(pgsz_order[2]) | + HPZ3(pgsz_order[3])); +} +EXPORT_SYMBOL(cxgb4_iscsi_init); + +static struct pci_driver cxgb4_driver; + +static void check_neigh_update(struct neighbour *neigh) +{ + const struct device *parent; + const struct net_device *netdev = neigh->dev; + + if (netdev->priv_flags & IFF_802_1Q_VLAN) + netdev = vlan_dev_real_dev(netdev); + parent = netdev->dev.parent; + if (parent && parent->driver == &cxgb4_driver.driver) + t4_l2t_update(dev_get_drvdata(parent), neigh); +} + +static int netevent_cb(struct notifier_block *nb, unsigned long event, + void *data) +{ + switch (event) { + case NETEVENT_NEIGH_UPDATE: + check_neigh_update(data); + break; + case NETEVENT_REDIRECT: + default: + break; + } + return 0; +} + +static bool netevent_registered; +static struct notifier_block cxgb4_netevent_nb = { + .notifier_call = netevent_cb +}; + +static void uld_attach(struct adapter *adap, unsigned int uld) +{ + void *handle; + struct cxgb4_lld_info lli; + + lli.pdev = adap->pdev; + lli.l2t = adap->l2t; + lli.tids = &adap->tids; + lli.ports = adap->port; + lli.vr = &adap->vres; + lli.mtus = adap->params.mtus; + if (uld == CXGB4_ULD_RDMA) { + lli.rxq_ids = adap->sge.rdma_rxq; + lli.nrxq = adap->sge.rdmaqs; + } else if (uld == CXGB4_ULD_ISCSI) { + lli.rxq_ids = adap->sge.ofld_rxq; + lli.nrxq = adap->sge.ofldqsets; + } + lli.ntxq = adap->sge.ofldqsets; + lli.nchan = adap->params.nports; + lli.nports = adap->params.nports; + lli.wr_cred = adap->params.ofldq_wr_cred; + lli.adapter_type = adap->params.rev; + lli.iscsi_iolen = MAXRXDATA_GET(t4_read_reg(adap, TP_PARA_REG2)); + lli.udb_density = 1 << QUEUESPERPAGEPF0_GET( + t4_read_reg(adap, SGE_EGRESS_QUEUES_PER_PAGE_PF) >> + (adap->fn * 4)); + lli.ucq_density = 1 << QUEUESPERPAGEPF0_GET( + t4_read_reg(adap, SGE_INGRESS_QUEUES_PER_PAGE_PF) >> + (adap->fn * 4)); + lli.gts_reg = adap->regs + MYPF_REG(SGE_PF_GTS); + lli.db_reg = adap->regs + MYPF_REG(SGE_PF_KDOORBELL); + lli.fw_vers = adap->params.fw_vers; + + handle = ulds[uld].add(&lli); + if (IS_ERR(handle)) { + dev_warn(adap->pdev_dev, + "could not attach to the %s driver, error %ld\n", + uld_str[uld], PTR_ERR(handle)); + return; + } + + adap->uld_handle[uld] = handle; + + if (!netevent_registered) { + register_netevent_notifier(&cxgb4_netevent_nb); + netevent_registered = true; + } + + if (adap->flags & FULL_INIT_DONE) + ulds[uld].state_change(handle, CXGB4_STATE_UP); +} + +static void attach_ulds(struct adapter *adap) +{ + unsigned int i; + + mutex_lock(&uld_mutex); + list_add_tail(&adap->list_node, &adapter_list); + for (i = 0; i < CXGB4_ULD_MAX; i++) + if (ulds[i].add) + uld_attach(adap, i); + mutex_unlock(&uld_mutex); +} + +static void detach_ulds(struct adapter *adap) +{ + unsigned int i; + + mutex_lock(&uld_mutex); + list_del(&adap->list_node); + for (i = 0; i < CXGB4_ULD_MAX; i++) + if (adap->uld_handle[i]) { + ulds[i].state_change(adap->uld_handle[i], + CXGB4_STATE_DETACH); + adap->uld_handle[i] = NULL; + } + if (netevent_registered && list_empty(&adapter_list)) { + unregister_netevent_notifier(&cxgb4_netevent_nb); + netevent_registered = false; + } + mutex_unlock(&uld_mutex); +} + +static void notify_ulds(struct adapter *adap, enum cxgb4_state new_state) +{ + unsigned int i; + + mutex_lock(&uld_mutex); + for (i = 0; i < CXGB4_ULD_MAX; i++) + if (adap->uld_handle[i]) + ulds[i].state_change(adap->uld_handle[i], new_state); + mutex_unlock(&uld_mutex); +} + +/** + * cxgb4_register_uld - register an upper-layer driver + * @type: the ULD type + * @p: the ULD methods + * + * Registers an upper-layer driver with this driver and notifies the ULD + * about any presently available devices that support its type. Returns + * %-EBUSY if a ULD of the same type is already registered. + */ +int cxgb4_register_uld(enum cxgb4_uld type, const struct cxgb4_uld_info *p) +{ + int ret = 0; + struct adapter *adap; + + if (type >= CXGB4_ULD_MAX) + return -EINVAL; + mutex_lock(&uld_mutex); + if (ulds[type].add) { + ret = -EBUSY; + goto out; + } + ulds[type] = *p; + list_for_each_entry(adap, &adapter_list, list_node) + uld_attach(adap, type); +out: mutex_unlock(&uld_mutex); + return ret; +} +EXPORT_SYMBOL(cxgb4_register_uld); + +/** + * cxgb4_unregister_uld - unregister an upper-layer driver + * @type: the ULD type + * + * Unregisters an existing upper-layer driver. + */ +int cxgb4_unregister_uld(enum cxgb4_uld type) +{ + struct adapter *adap; + + if (type >= CXGB4_ULD_MAX) + return -EINVAL; + mutex_lock(&uld_mutex); + list_for_each_entry(adap, &adapter_list, list_node) + adap->uld_handle[type] = NULL; + ulds[type].add = NULL; + mutex_unlock(&uld_mutex); + return 0; +} +EXPORT_SYMBOL(cxgb4_unregister_uld); + +/** + * cxgb_up - enable the adapter + * @adap: adapter being enabled + * + * Called when the first port is enabled, this function performs the + * actions necessary to make an adapter operational, such as completing + * the initialization of HW modules, and enabling interrupts. + * + * Must be called with the rtnl lock held. + */ +static int cxgb_up(struct adapter *adap) +{ + int err; + + err = setup_sge_queues(adap); + if (err) + goto out; + err = setup_rss(adap); + if (err) + goto freeq; + + if (adap->flags & USING_MSIX) { + name_msix_vecs(adap); + err = request_irq(adap->msix_info[0].vec, t4_nondata_intr, 0, + adap->msix_info[0].desc, adap); + if (err) + goto irq_err; + + err = request_msix_queue_irqs(adap); + if (err) { + free_irq(adap->msix_info[0].vec, adap); + goto irq_err; + } + } else { + err = request_irq(adap->pdev->irq, t4_intr_handler(adap), + (adap->flags & USING_MSI) ? 0 : IRQF_SHARED, + adap->port[0]->name, adap); + if (err) + goto irq_err; + } + enable_rx(adap); + t4_sge_start(adap); + t4_intr_enable(adap); + adap->flags |= FULL_INIT_DONE; + notify_ulds(adap, CXGB4_STATE_UP); + out: + return err; + irq_err: + dev_err(adap->pdev_dev, "request_irq failed, err %d\n", err); + freeq: + t4_free_sge_resources(adap); + goto out; +} + +static void cxgb_down(struct adapter *adapter) +{ + t4_intr_disable(adapter); + cancel_work_sync(&adapter->tid_release_task); + adapter->tid_release_task_busy = false; + adapter->tid_release_head = NULL; + + if (adapter->flags & USING_MSIX) { + free_msix_queue_irqs(adapter); + free_irq(adapter->msix_info[0].vec, adapter); + } else + free_irq(adapter->pdev->irq, adapter); + quiesce_rx(adapter); + t4_sge_stop(adapter); + t4_free_sge_resources(adapter); + adapter->flags &= ~FULL_INIT_DONE; +} + +/* + * net_device operations + */ +static int cxgb_open(struct net_device *dev) +{ + int err; + struct port_info *pi = netdev_priv(dev); + struct adapter *adapter = pi->adapter; + + netif_carrier_off(dev); + + if (!(adapter->flags & FULL_INIT_DONE)) { + err = cxgb_up(adapter); + if (err < 0) + return err; + } + + err = link_start(dev); + if (!err) + netif_tx_start_all_queues(dev); + return err; +} + +static int cxgb_close(struct net_device *dev) +{ + struct port_info *pi = netdev_priv(dev); + struct adapter *adapter = pi->adapter; + + netif_tx_stop_all_queues(dev); + netif_carrier_off(dev); + return t4_enable_vi(adapter, adapter->fn, pi->viid, false, false); +} + +static struct rtnl_link_stats64 *cxgb_get_stats(struct net_device *dev, + struct rtnl_link_stats64 *ns) +{ + struct port_stats stats; + struct port_info *p = netdev_priv(dev); + struct adapter *adapter = p->adapter; + + spin_lock(&adapter->stats_lock); + t4_get_port_stats(adapter, p->tx_chan, &stats); + spin_unlock(&adapter->stats_lock); + + ns->tx_bytes = stats.tx_octets; + ns->tx_packets = stats.tx_frames; + ns->rx_bytes = stats.rx_octets; + ns->rx_packets = stats.rx_frames; + ns->multicast = stats.rx_mcast_frames; + + /* detailed rx_errors */ + ns->rx_length_errors = stats.rx_jabber + stats.rx_too_long + + stats.rx_runt; + ns->rx_over_errors = 0; + ns->rx_crc_errors = stats.rx_fcs_err; + ns->rx_frame_errors = stats.rx_symbol_err; + ns->rx_fifo_errors = stats.rx_ovflow0 + stats.rx_ovflow1 + + stats.rx_ovflow2 + stats.rx_ovflow3 + + stats.rx_trunc0 + stats.rx_trunc1 + + stats.rx_trunc2 + stats.rx_trunc3; + ns->rx_missed_errors = 0; + + /* detailed tx_errors */ + ns->tx_aborted_errors = 0; + ns->tx_carrier_errors = 0; + ns->tx_fifo_errors = 0; + ns->tx_heartbeat_errors = 0; + ns->tx_window_errors = 0; + + ns->tx_errors = stats.tx_error_frames; + ns->rx_errors = stats.rx_symbol_err + stats.rx_fcs_err + + ns->rx_length_errors + stats.rx_len_err + ns->rx_fifo_errors; + return ns; +} + +static int cxgb_ioctl(struct net_device *dev, struct ifreq *req, int cmd) +{ + unsigned int mbox; + int ret = 0, prtad, devad; + struct port_info *pi = netdev_priv(dev); + struct mii_ioctl_data *data = (struct mii_ioctl_data *)&req->ifr_data; + + switch (cmd) { + case SIOCGMIIPHY: + if (pi->mdio_addr < 0) + return -EOPNOTSUPP; + data->phy_id = pi->mdio_addr; + break; + case SIOCGMIIREG: + case SIOCSMIIREG: + if (mdio_phy_id_is_c45(data->phy_id)) { + prtad = mdio_phy_id_prtad(data->phy_id); + devad = mdio_phy_id_devad(data->phy_id); + } else if (data->phy_id < 32) { + prtad = data->phy_id; + devad = 0; + data->reg_num &= 0x1f; + } else + return -EINVAL; + + mbox = pi->adapter->fn; + if (cmd == SIOCGMIIREG) + ret = t4_mdio_rd(pi->adapter, mbox, prtad, devad, + data->reg_num, &data->val_out); + else + ret = t4_mdio_wr(pi->adapter, mbox, prtad, devad, + data->reg_num, data->val_in); + break; + default: + return -EOPNOTSUPP; + } + return ret; +} + +static void cxgb_set_rxmode(struct net_device *dev) +{ + /* unfortunately we can't return errors to the stack */ + set_rxmode(dev, -1, false); +} + +static int cxgb_change_mtu(struct net_device *dev, int new_mtu) +{ + int ret; + struct port_info *pi = netdev_priv(dev); + + if (new_mtu < 81 || new_mtu > MAX_MTU) /* accommodate SACK */ + return -EINVAL; + ret = t4_set_rxmode(pi->adapter, pi->adapter->fn, pi->viid, new_mtu, -1, + -1, -1, -1, true); + if (!ret) + dev->mtu = new_mtu; + return ret; +} + +static int cxgb_set_mac_addr(struct net_device *dev, void *p) +{ + int ret; + struct sockaddr *addr = p; + struct port_info *pi = netdev_priv(dev); + + if (!is_valid_ether_addr(addr->sa_data)) + return -EINVAL; + + ret = t4_change_mac(pi->adapter, pi->adapter->fn, pi->viid, + pi->xact_addr_filt, addr->sa_data, true, true); + if (ret < 0) + return ret; + + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + pi->xact_addr_filt = ret; + return 0; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void cxgb_netpoll(struct net_device *dev) +{ + struct port_info *pi = netdev_priv(dev); + struct adapter *adap = pi->adapter; + + if (adap->flags & USING_MSIX) { + int i; + struct sge_eth_rxq *rx = &adap->sge.ethrxq[pi->first_qset]; + + for (i = pi->nqsets; i; i--, rx++) + t4_sge_intr_msix(0, &rx->rspq); + } else + t4_intr_handler(adap)(0, adap); +} +#endif + +static const struct net_device_ops cxgb4_netdev_ops = { + .ndo_open = cxgb_open, + .ndo_stop = cxgb_close, + .ndo_start_xmit = t4_eth_xmit, + .ndo_get_stats64 = cxgb_get_stats, + .ndo_set_rx_mode = cxgb_set_rxmode, + .ndo_set_mac_address = cxgb_set_mac_addr, + .ndo_set_features = cxgb_set_features, + .ndo_validate_addr = eth_validate_addr, + .ndo_do_ioctl = cxgb_ioctl, + .ndo_change_mtu = cxgb_change_mtu, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = cxgb_netpoll, +#endif +}; + +void t4_fatal_err(struct adapter *adap) +{ + t4_set_reg_field(adap, SGE_CONTROL, GLOBALENABLE, 0); + t4_intr_disable(adap); + dev_alert(adap->pdev_dev, "encountered fatal error, adapter stopped\n"); +} + +static void setup_memwin(struct adapter *adap) +{ + u32 bar0; + + bar0 = pci_resource_start(adap->pdev, 0); /* truncation intentional */ + t4_write_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 0), + (bar0 + MEMWIN0_BASE) | BIR(0) | + WINDOW(ilog2(MEMWIN0_APERTURE) - 10)); + t4_write_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 1), + (bar0 + MEMWIN1_BASE) | BIR(0) | + WINDOW(ilog2(MEMWIN1_APERTURE) - 10)); + t4_write_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 2), + (bar0 + MEMWIN2_BASE) | BIR(0) | + WINDOW(ilog2(MEMWIN2_APERTURE) - 10)); + if (adap->vres.ocq.size) { + unsigned int start, sz_kb; + + start = pci_resource_start(adap->pdev, 2) + + OCQ_WIN_OFFSET(adap->pdev, &adap->vres); + sz_kb = roundup_pow_of_two(adap->vres.ocq.size) >> 10; + t4_write_reg(adap, + PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 3), + start | BIR(1) | WINDOW(ilog2(sz_kb))); + t4_write_reg(adap, + PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET, 3), + adap->vres.ocq.start); + t4_read_reg(adap, + PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET, 3)); + } +} + +static int adap_init1(struct adapter *adap, struct fw_caps_config_cmd *c) +{ + u32 v; + int ret; + + /* get device capabilities */ + memset(c, 0, sizeof(*c)); + c->op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | FW_CMD_READ); + c->retval_len16 = htonl(FW_LEN16(*c)); + ret = t4_wr_mbox(adap, adap->fn, c, sizeof(*c), c); + if (ret < 0) + return ret; + + /* select capabilities we'll be using */ + if (c->niccaps & htons(FW_CAPS_CONFIG_NIC_VM)) { + if (!vf_acls) + c->niccaps ^= htons(FW_CAPS_CONFIG_NIC_VM); + else + c->niccaps = htons(FW_CAPS_CONFIG_NIC_VM); + } else if (vf_acls) { + dev_err(adap->pdev_dev, "virtualization ACLs not supported"); + return ret; + } + c->op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | FW_CMD_WRITE); + ret = t4_wr_mbox(adap, adap->fn, c, sizeof(*c), NULL); + if (ret < 0) + return ret; + + ret = t4_config_glbl_rss(adap, adap->fn, + FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL, + FW_RSS_GLB_CONFIG_CMD_TNLMAPEN | + FW_RSS_GLB_CONFIG_CMD_TNLALLLKP); + if (ret < 0) + return ret; + + ret = t4_cfg_pfvf(adap, adap->fn, adap->fn, 0, MAX_EGRQ, 64, MAX_INGQ, + 0, 0, 4, 0xf, 0xf, 16, FW_CMD_CAP_PF, FW_CMD_CAP_PF); + if (ret < 0) + return ret; + + t4_sge_init(adap); + + /* tweak some settings */ + t4_write_reg(adap, TP_SHIFT_CNT, 0x64f8849); + t4_write_reg(adap, ULP_RX_TDDP_PSZ, HPZ0(PAGE_SHIFT - 12)); + t4_write_reg(adap, TP_PIO_ADDR, TP_INGRESS_CONFIG); + v = t4_read_reg(adap, TP_PIO_DATA); + t4_write_reg(adap, TP_PIO_DATA, v & ~CSUM_HAS_PSEUDO_HDR); + + /* get basic stuff going */ + return t4_early_init(adap, adap->fn); +} + +/* + * Max # of ATIDs. The absolute HW max is 16K but we keep it lower. + */ +#define MAX_ATIDS 8192U + +/* + * Phase 0 of initialization: contact FW, obtain config, perform basic init. + */ +static int adap_init0(struct adapter *adap) +{ + int ret; + u32 v, port_vec; + enum dev_state state; + u32 params[7], val[7]; + struct fw_caps_config_cmd c; + + ret = t4_check_fw_version(adap); + if (ret == -EINVAL || ret > 0) { + if (upgrade_fw(adap) >= 0) /* recache FW version */ + ret = t4_check_fw_version(adap); + } + if (ret < 0) + return ret; + + /* contact FW, request master */ + ret = t4_fw_hello(adap, adap->fn, adap->fn, MASTER_MUST, &state); + if (ret < 0) { + dev_err(adap->pdev_dev, "could not connect to FW, error %d\n", + ret); + return ret; + } + + /* reset device */ + ret = t4_fw_reset(adap, adap->fn, PIORSTMODE | PIORST); + if (ret < 0) + goto bye; + + for (v = 0; v < SGE_NTIMERS - 1; v++) + adap->sge.timer_val[v] = min(intr_holdoff[v], MAX_SGE_TIMERVAL); + adap->sge.timer_val[SGE_NTIMERS - 1] = MAX_SGE_TIMERVAL; + adap->sge.counter_val[0] = 1; + for (v = 1; v < SGE_NCOUNTERS; v++) + adap->sge.counter_val[v] = min(intr_cnt[v - 1], + THRESHOLD_3_MASK); +#define FW_PARAM_DEV(param) \ + (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | \ + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_##param)) + + params[0] = FW_PARAM_DEV(CCLK); + ret = t4_query_params(adap, adap->fn, adap->fn, 0, 1, params, val); + if (ret < 0) + goto bye; + adap->params.vpd.cclk = val[0]; + + ret = adap_init1(adap, &c); + if (ret < 0) + goto bye; + +#define FW_PARAM_PFVF(param) \ + (FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) | \ + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_PFVF_##param) | \ + FW_PARAMS_PARAM_Y(adap->fn)) + + params[0] = FW_PARAM_DEV(PORTVEC); + params[1] = FW_PARAM_PFVF(L2T_START); + params[2] = FW_PARAM_PFVF(L2T_END); + params[3] = FW_PARAM_PFVF(FILTER_START); + params[4] = FW_PARAM_PFVF(FILTER_END); + params[5] = FW_PARAM_PFVF(IQFLINT_START); + params[6] = FW_PARAM_PFVF(EQ_START); + ret = t4_query_params(adap, adap->fn, adap->fn, 0, 7, params, val); + if (ret < 0) + goto bye; + port_vec = val[0]; + adap->tids.ftid_base = val[3]; + adap->tids.nftids = val[4] - val[3] + 1; + adap->sge.ingr_start = val[5]; + adap->sge.egr_start = val[6]; + + if (c.ofldcaps) { + /* query offload-related parameters */ + params[0] = FW_PARAM_DEV(NTID); + params[1] = FW_PARAM_PFVF(SERVER_START); + params[2] = FW_PARAM_PFVF(SERVER_END); + params[3] = FW_PARAM_PFVF(TDDP_START); + params[4] = FW_PARAM_PFVF(TDDP_END); + params[5] = FW_PARAM_DEV(FLOWC_BUFFIFO_SZ); + ret = t4_query_params(adap, adap->fn, adap->fn, 0, 6, params, + val); + if (ret < 0) + goto bye; + adap->tids.ntids = val[0]; + adap->tids.natids = min(adap->tids.ntids / 2, MAX_ATIDS); + adap->tids.stid_base = val[1]; + adap->tids.nstids = val[2] - val[1] + 1; + adap->vres.ddp.start = val[3]; + adap->vres.ddp.size = val[4] - val[3] + 1; + adap->params.ofldq_wr_cred = val[5]; + adap->params.offload = 1; + } + if (c.rdmacaps) { + params[0] = FW_PARAM_PFVF(STAG_START); + params[1] = FW_PARAM_PFVF(STAG_END); + params[2] = FW_PARAM_PFVF(RQ_START); + params[3] = FW_PARAM_PFVF(RQ_END); + params[4] = FW_PARAM_PFVF(PBL_START); + params[5] = FW_PARAM_PFVF(PBL_END); + ret = t4_query_params(adap, adap->fn, adap->fn, 0, 6, params, + val); + if (ret < 0) + goto bye; + adap->vres.stag.start = val[0]; + adap->vres.stag.size = val[1] - val[0] + 1; + adap->vres.rq.start = val[2]; + adap->vres.rq.size = val[3] - val[2] + 1; + adap->vres.pbl.start = val[4]; + adap->vres.pbl.size = val[5] - val[4] + 1; + + params[0] = FW_PARAM_PFVF(SQRQ_START); + params[1] = FW_PARAM_PFVF(SQRQ_END); + params[2] = FW_PARAM_PFVF(CQ_START); + params[3] = FW_PARAM_PFVF(CQ_END); + params[4] = FW_PARAM_PFVF(OCQ_START); + params[5] = FW_PARAM_PFVF(OCQ_END); + ret = t4_query_params(adap, adap->fn, adap->fn, 0, 6, params, + val); + if (ret < 0) + goto bye; + adap->vres.qp.start = val[0]; + adap->vres.qp.size = val[1] - val[0] + 1; + adap->vres.cq.start = val[2]; + adap->vres.cq.size = val[3] - val[2] + 1; + adap->vres.ocq.start = val[4]; + adap->vres.ocq.size = val[5] - val[4] + 1; + } + if (c.iscsicaps) { + params[0] = FW_PARAM_PFVF(ISCSI_START); + params[1] = FW_PARAM_PFVF(ISCSI_END); + ret = t4_query_params(adap, adap->fn, adap->fn, 0, 2, params, + val); + if (ret < 0) + goto bye; + adap->vres.iscsi.start = val[0]; + adap->vres.iscsi.size = val[1] - val[0] + 1; + } +#undef FW_PARAM_PFVF +#undef FW_PARAM_DEV + + adap->params.nports = hweight32(port_vec); + adap->params.portvec = port_vec; + adap->flags |= FW_OK; + + /* These are finalized by FW initialization, load their values now */ + v = t4_read_reg(adap, TP_TIMER_RESOLUTION); + adap->params.tp.tre = TIMERRESOLUTION_GET(v); + t4_read_mtu_tbl(adap, adap->params.mtus, NULL); + t4_load_mtus(adap, adap->params.mtus, adap->params.a_wnd, + adap->params.b_wnd); + +#ifdef CONFIG_PCI_IOV + /* + * Provision resource limits for Virtual Functions. We currently + * grant them all the same static resource limits except for the Port + * Access Rights Mask which we're assigning based on the PF. All of + * the static provisioning stuff for both the PF and VF really needs + * to be managed in a persistent manner for each device which the + * firmware controls. + */ + { + int pf, vf; + + for (pf = 0; pf < ARRAY_SIZE(num_vf); pf++) { + if (num_vf[pf] <= 0) + continue; + + /* VF numbering starts at 1! */ + for (vf = 1; vf <= num_vf[pf]; vf++) { + ret = t4_cfg_pfvf(adap, adap->fn, pf, vf, + VFRES_NEQ, VFRES_NETHCTRL, + VFRES_NIQFLINT, VFRES_NIQ, + VFRES_TC, VFRES_NVI, + FW_PFVF_CMD_CMASK_MASK, + pfvfres_pmask(adap, pf, vf), + VFRES_NEXACTF, + VFRES_R_CAPS, VFRES_WX_CAPS); + if (ret < 0) + dev_warn(adap->pdev_dev, "failed to " + "provision pf/vf=%d/%d; " + "err=%d\n", pf, vf, ret); + } + } + } +#endif + + setup_memwin(adap); + return 0; + + /* + * If a command timed out or failed with EIO FW does not operate within + * its spec or something catastrophic happened to HW/FW, stop issuing + * commands. + */ +bye: if (ret != -ETIMEDOUT && ret != -EIO) + t4_fw_bye(adap, adap->fn); + return ret; +} + +/* EEH callbacks */ + +static pci_ers_result_t eeh_err_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + int i; + struct adapter *adap = pci_get_drvdata(pdev); + + if (!adap) + goto out; + + rtnl_lock(); + adap->flags &= ~FW_OK; + notify_ulds(adap, CXGB4_STATE_START_RECOVERY); + for_each_port(adap, i) { + struct net_device *dev = adap->port[i]; + + netif_device_detach(dev); + netif_carrier_off(dev); + } + if (adap->flags & FULL_INIT_DONE) + cxgb_down(adap); + rtnl_unlock(); + pci_disable_device(pdev); +out: return state == pci_channel_io_perm_failure ? + PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_NEED_RESET; +} + +static pci_ers_result_t eeh_slot_reset(struct pci_dev *pdev) +{ + int i, ret; + struct fw_caps_config_cmd c; + struct adapter *adap = pci_get_drvdata(pdev); + + if (!adap) { + pci_restore_state(pdev); + pci_save_state(pdev); + return PCI_ERS_RESULT_RECOVERED; + } + + if (pci_enable_device(pdev)) { + dev_err(&pdev->dev, "cannot reenable PCI device after reset\n"); + return PCI_ERS_RESULT_DISCONNECT; + } + + pci_set_master(pdev); + pci_restore_state(pdev); + pci_save_state(pdev); + pci_cleanup_aer_uncorrect_error_status(pdev); + + if (t4_wait_dev_ready(adap) < 0) + return PCI_ERS_RESULT_DISCONNECT; + if (t4_fw_hello(adap, adap->fn, adap->fn, MASTER_MUST, NULL)) + return PCI_ERS_RESULT_DISCONNECT; + adap->flags |= FW_OK; + if (adap_init1(adap, &c)) + return PCI_ERS_RESULT_DISCONNECT; + + for_each_port(adap, i) { + struct port_info *p = adap2pinfo(adap, i); + + ret = t4_alloc_vi(adap, adap->fn, p->tx_chan, adap->fn, 0, 1, + NULL, NULL); + if (ret < 0) + return PCI_ERS_RESULT_DISCONNECT; + p->viid = ret; + p->xact_addr_filt = -1; + } + + t4_load_mtus(adap, adap->params.mtus, adap->params.a_wnd, + adap->params.b_wnd); + setup_memwin(adap); + if (cxgb_up(adap)) + return PCI_ERS_RESULT_DISCONNECT; + return PCI_ERS_RESULT_RECOVERED; +} + +static void eeh_resume(struct pci_dev *pdev) +{ + int i; + struct adapter *adap = pci_get_drvdata(pdev); + + if (!adap) + return; + + rtnl_lock(); + for_each_port(adap, i) { + struct net_device *dev = adap->port[i]; + + if (netif_running(dev)) { + link_start(dev); + cxgb_set_rxmode(dev); + } + netif_device_attach(dev); + } + rtnl_unlock(); +} + +static struct pci_error_handlers cxgb4_eeh = { + .error_detected = eeh_err_detected, + .slot_reset = eeh_slot_reset, + .resume = eeh_resume, +}; + +static inline bool is_10g_port(const struct link_config *lc) +{ + return (lc->supported & FW_PORT_CAP_SPEED_10G) != 0; +} + +static inline void init_rspq(struct sge_rspq *q, u8 timer_idx, u8 pkt_cnt_idx, + unsigned int size, unsigned int iqe_size) +{ + q->intr_params = QINTR_TIMER_IDX(timer_idx) | + (pkt_cnt_idx < SGE_NCOUNTERS ? QINTR_CNT_EN : 0); + q->pktcnt_idx = pkt_cnt_idx < SGE_NCOUNTERS ? pkt_cnt_idx : 0; + q->iqe_len = iqe_size; + q->size = size; +} + +/* + * Perform default configuration of DMA queues depending on the number and type + * of ports we found and the number of available CPUs. Most settings can be + * modified by the admin prior to actual use. + */ +static void __devinit cfg_queues(struct adapter *adap) +{ + struct sge *s = &adap->sge; + int i, q10g = 0, n10g = 0, qidx = 0; + + for_each_port(adap, i) + n10g += is_10g_port(&adap2pinfo(adap, i)->link_cfg); + + /* + * We default to 1 queue per non-10G port and up to # of cores queues + * per 10G port. + */ + if (n10g) + q10g = (MAX_ETH_QSETS - (adap->params.nports - n10g)) / n10g; + if (q10g > num_online_cpus()) + q10g = num_online_cpus(); + + for_each_port(adap, i) { + struct port_info *pi = adap2pinfo(adap, i); + + pi->first_qset = qidx; + pi->nqsets = is_10g_port(&pi->link_cfg) ? q10g : 1; + qidx += pi->nqsets; + } + + s->ethqsets = qidx; + s->max_ethqsets = qidx; /* MSI-X may lower it later */ + + if (is_offload(adap)) { + /* + * For offload we use 1 queue/channel if all ports are up to 1G, + * otherwise we divide all available queues amongst the channels + * capped by the number of available cores. + */ + if (n10g) { + i = min_t(int, ARRAY_SIZE(s->ofldrxq), + num_online_cpus()); + s->ofldqsets = roundup(i, adap->params.nports); + } else + s->ofldqsets = adap->params.nports; + /* For RDMA one Rx queue per channel suffices */ + s->rdmaqs = adap->params.nports; + } + + for (i = 0; i < ARRAY_SIZE(s->ethrxq); i++) { + struct sge_eth_rxq *r = &s->ethrxq[i]; + + init_rspq(&r->rspq, 0, 0, 1024, 64); + r->fl.size = 72; + } + + for (i = 0; i < ARRAY_SIZE(s->ethtxq); i++) + s->ethtxq[i].q.size = 1024; + + for (i = 0; i < ARRAY_SIZE(s->ctrlq); i++) + s->ctrlq[i].q.size = 512; + + for (i = 0; i < ARRAY_SIZE(s->ofldtxq); i++) + s->ofldtxq[i].q.size = 1024; + + for (i = 0; i < ARRAY_SIZE(s->ofldrxq); i++) { + struct sge_ofld_rxq *r = &s->ofldrxq[i]; + + init_rspq(&r->rspq, 0, 0, 1024, 64); + r->rspq.uld = CXGB4_ULD_ISCSI; + r->fl.size = 72; + } + + for (i = 0; i < ARRAY_SIZE(s->rdmarxq); i++) { + struct sge_ofld_rxq *r = &s->rdmarxq[i]; + + init_rspq(&r->rspq, 0, 0, 511, 64); + r->rspq.uld = CXGB4_ULD_RDMA; + r->fl.size = 72; + } + + init_rspq(&s->fw_evtq, 6, 0, 512, 64); + init_rspq(&s->intrq, 6, 0, 2 * MAX_INGQ, 64); +} + +/* + * Reduce the number of Ethernet queues across all ports to at most n. + * n provides at least one queue per port. + */ +static void __devinit reduce_ethqs(struct adapter *adap, int n) +{ + int i; + struct port_info *pi; + + while (n < adap->sge.ethqsets) + for_each_port(adap, i) { + pi = adap2pinfo(adap, i); + if (pi->nqsets > 1) { + pi->nqsets--; + adap->sge.ethqsets--; + if (adap->sge.ethqsets <= n) + break; + } + } + + n = 0; + for_each_port(adap, i) { + pi = adap2pinfo(adap, i); + pi->first_qset = n; + n += pi->nqsets; + } +} + +/* 2 MSI-X vectors needed for the FW queue and non-data interrupts */ +#define EXTRA_VECS 2 + +static int __devinit enable_msix(struct adapter *adap) +{ + int ofld_need = 0; + int i, err, want, need; + struct sge *s = &adap->sge; + unsigned int nchan = adap->params.nports; + struct msix_entry entries[MAX_INGQ + 1]; + + for (i = 0; i < ARRAY_SIZE(entries); ++i) + entries[i].entry = i; + + want = s->max_ethqsets + EXTRA_VECS; + if (is_offload(adap)) { + want += s->rdmaqs + s->ofldqsets; + /* need nchan for each possible ULD */ + ofld_need = 2 * nchan; + } + need = adap->params.nports + EXTRA_VECS + ofld_need; + + while ((err = pci_enable_msix(adap->pdev, entries, want)) >= need) + want = err; + + if (!err) { + /* + * Distribute available vectors to the various queue groups. + * Every group gets its minimum requirement and NIC gets top + * priority for leftovers. + */ + i = want - EXTRA_VECS - ofld_need; + if (i < s->max_ethqsets) { + s->max_ethqsets = i; + if (i < s->ethqsets) + reduce_ethqs(adap, i); + } + if (is_offload(adap)) { + i = want - EXTRA_VECS - s->max_ethqsets; + i -= ofld_need - nchan; + s->ofldqsets = (i / nchan) * nchan; /* round down */ + } + for (i = 0; i < want; ++i) + adap->msix_info[i].vec = entries[i].vector; + } else if (err > 0) + dev_info(adap->pdev_dev, + "only %d MSI-X vectors left, not using MSI-X\n", err); + return err; +} + +#undef EXTRA_VECS + +static int __devinit init_rss(struct adapter *adap) +{ + unsigned int i, j; + + for_each_port(adap, i) { + struct port_info *pi = adap2pinfo(adap, i); + + pi->rss = kcalloc(pi->rss_size, sizeof(u16), GFP_KERNEL); + if (!pi->rss) + return -ENOMEM; + for (j = 0; j < pi->rss_size; j++) + pi->rss[j] = j % pi->nqsets; + } + return 0; +} + +static void __devinit print_port_info(const struct net_device *dev) +{ + static const char *base[] = { + "R XFI", "R XAUI", "T SGMII", "T XFI", "T XAUI", "KX4", "CX4", + "KX", "KR", "R SFP+", "KR/KX", "KR/KX/KX4" + }; + + char buf[80]; + char *bufp = buf; + const char *spd = ""; + const struct port_info *pi = netdev_priv(dev); + const struct adapter *adap = pi->adapter; + + if (adap->params.pci.speed == PCI_EXP_LNKSTA_CLS_2_5GB) + spd = " 2.5 GT/s"; + else if (adap->params.pci.speed == PCI_EXP_LNKSTA_CLS_5_0GB) + spd = " 5 GT/s"; + + if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_100M) + bufp += sprintf(bufp, "100/"); + if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_1G) + bufp += sprintf(bufp, "1000/"); + if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_10G) + bufp += sprintf(bufp, "10G/"); + if (bufp != buf) + --bufp; + sprintf(bufp, "BASE-%s", base[pi->port_type]); + + netdev_info(dev, "Chelsio %s rev %d %s %sNIC PCIe x%d%s%s\n", + adap->params.vpd.id, adap->params.rev, buf, + is_offload(adap) ? "R" : "", adap->params.pci.width, spd, + (adap->flags & USING_MSIX) ? " MSI-X" : + (adap->flags & USING_MSI) ? " MSI" : ""); + netdev_info(dev, "S/N: %s, E/C: %s\n", + adap->params.vpd.sn, adap->params.vpd.ec); +} + +static void __devinit enable_pcie_relaxed_ordering(struct pci_dev *dev) +{ + u16 v; + int pos; + + pos = pci_pcie_cap(dev); + if (pos > 0) { + pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &v); + v |= PCI_EXP_DEVCTL_RELAX_EN; + pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, v); + } +} + +/* + * Free the following resources: + * - memory used for tables + * - MSI/MSI-X + * - net devices + * - resources FW is holding for us + */ +static void free_some_resources(struct adapter *adapter) +{ + unsigned int i; + + t4_free_mem(adapter->l2t); + t4_free_mem(adapter->tids.tid_tab); + disable_msi(adapter); + + for_each_port(adapter, i) + if (adapter->port[i]) { + kfree(adap2pinfo(adapter, i)->rss); + free_netdev(adapter->port[i]); + } + if (adapter->flags & FW_OK) + t4_fw_bye(adapter, adapter->fn); +} + +#define TSO_FLAGS (NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN) +#define VLAN_FEAT (NETIF_F_SG | NETIF_F_IP_CSUM | TSO_FLAGS | \ + NETIF_F_IPV6_CSUM | NETIF_F_HIGHDMA) + +static int __devinit init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int func, i, err; + struct port_info *pi; + unsigned int highdma = 0; + struct adapter *adapter = NULL; + + printk_once(KERN_INFO "%s - version %s\n", DRV_DESC, DRV_VERSION); + + err = pci_request_regions(pdev, KBUILD_MODNAME); + if (err) { + /* Just info, some other driver may have claimed the device. */ + dev_info(&pdev->dev, "cannot obtain PCI resources\n"); + return err; + } + + /* We control everything through one PF */ + func = PCI_FUNC(pdev->devfn); + if (func != ent->driver_data) { + pci_save_state(pdev); /* to restore SR-IOV later */ + goto sriov; + } + + err = pci_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "cannot enable PCI device\n"); + goto out_release_regions; + } + + if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { + highdma = NETIF_F_HIGHDMA; + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); + if (err) { + dev_err(&pdev->dev, "unable to obtain 64-bit DMA for " + "coherent allocations\n"); + goto out_disable_device; + } + } else { + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err) { + dev_err(&pdev->dev, "no usable DMA configuration\n"); + goto out_disable_device; + } + } + + pci_enable_pcie_error_reporting(pdev); + enable_pcie_relaxed_ordering(pdev); + pci_set_master(pdev); + pci_save_state(pdev); + + adapter = kzalloc(sizeof(*adapter), GFP_KERNEL); + if (!adapter) { + err = -ENOMEM; + goto out_disable_device; + } + + adapter->regs = pci_ioremap_bar(pdev, 0); + if (!adapter->regs) { + dev_err(&pdev->dev, "cannot map device registers\n"); + err = -ENOMEM; + goto out_free_adapter; + } + + adapter->pdev = pdev; + adapter->pdev_dev = &pdev->dev; + adapter->fn = func; + adapter->msg_enable = dflt_msg_enable; + memset(adapter->chan_map, 0xff, sizeof(adapter->chan_map)); + + spin_lock_init(&adapter->stats_lock); + spin_lock_init(&adapter->tid_release_lock); + + INIT_WORK(&adapter->tid_release_task, process_tid_release_list); + + err = t4_prep_adapter(adapter); + if (err) + goto out_unmap_bar; + err = adap_init0(adapter); + if (err) + goto out_unmap_bar; + + for_each_port(adapter, i) { + struct net_device *netdev; + + netdev = alloc_etherdev_mq(sizeof(struct port_info), + MAX_ETH_QSETS); + if (!netdev) { + err = -ENOMEM; + goto out_free_dev; + } + + SET_NETDEV_DEV(netdev, &pdev->dev); + + adapter->port[i] = netdev; + pi = netdev_priv(netdev); + pi->adapter = adapter; + pi->xact_addr_filt = -1; + pi->port_id = i; + netdev->irq = pdev->irq; + + netdev->hw_features = NETIF_F_SG | TSO_FLAGS | + NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | + NETIF_F_RXCSUM | NETIF_F_RXHASH | + NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; + netdev->features |= netdev->hw_features | highdma; + netdev->vlan_features = netdev->features & VLAN_FEAT; + + netdev->priv_flags |= IFF_UNICAST_FLT; + + netdev->netdev_ops = &cxgb4_netdev_ops; + SET_ETHTOOL_OPS(netdev, &cxgb_ethtool_ops); + } + + pci_set_drvdata(pdev, adapter); + + if (adapter->flags & FW_OK) { + err = t4_port_init(adapter, func, func, 0); + if (err) + goto out_free_dev; + } + + /* + * Configure queues and allocate tables now, they can be needed as + * soon as the first register_netdev completes. + */ + cfg_queues(adapter); + + adapter->l2t = t4_init_l2t(); + if (!adapter->l2t) { + /* We tolerate a lack of L2T, giving up some functionality */ + dev_warn(&pdev->dev, "could not allocate L2T, continuing\n"); + adapter->params.offload = 0; + } + + if (is_offload(adapter) && tid_init(&adapter->tids) < 0) { + dev_warn(&pdev->dev, "could not allocate TID table, " + "continuing\n"); + adapter->params.offload = 0; + } + + /* See what interrupts we'll be using */ + if (msi > 1 && enable_msix(adapter) == 0) + adapter->flags |= USING_MSIX; + else if (msi > 0 && pci_enable_msi(pdev) == 0) + adapter->flags |= USING_MSI; + + err = init_rss(adapter); + if (err) + goto out_free_dev; + + /* + * The card is now ready to go. If any errors occur during device + * registration we do not fail the whole card but rather proceed only + * with the ports we manage to register successfully. However we must + * register at least one net device. + */ + for_each_port(adapter, i) { + pi = adap2pinfo(adapter, i); + netif_set_real_num_tx_queues(adapter->port[i], pi->nqsets); + netif_set_real_num_rx_queues(adapter->port[i], pi->nqsets); + + err = register_netdev(adapter->port[i]); + if (err) + break; + adapter->chan_map[pi->tx_chan] = i; + print_port_info(adapter->port[i]); + } + if (i == 0) { + dev_err(&pdev->dev, "could not register any net devices\n"); + goto out_free_dev; + } + if (err) { + dev_warn(&pdev->dev, "only %d net devices registered\n", i); + err = 0; + } + + if (cxgb4_debugfs_root) { + adapter->debugfs_root = debugfs_create_dir(pci_name(pdev), + cxgb4_debugfs_root); + setup_debugfs(adapter); + } + ++ /* PCIe EEH recovery on powerpc platforms needs fundamental reset */ ++ pdev->needs_freset = 1; ++ + if (is_offload(adapter)) + attach_ulds(adapter); + +sriov: +#ifdef CONFIG_PCI_IOV + if (func < ARRAY_SIZE(num_vf) && num_vf[func] > 0) + if (pci_enable_sriov(pdev, num_vf[func]) == 0) + dev_info(&pdev->dev, + "instantiated %u virtual functions\n", + num_vf[func]); +#endif + return 0; + + out_free_dev: + free_some_resources(adapter); + out_unmap_bar: + iounmap(adapter->regs); + out_free_adapter: + kfree(adapter); + out_disable_device: + pci_disable_pcie_error_reporting(pdev); + pci_disable_device(pdev); + out_release_regions: + pci_release_regions(pdev); + pci_set_drvdata(pdev, NULL); + return err; +} + +static void __devexit remove_one(struct pci_dev *pdev) +{ + struct adapter *adapter = pci_get_drvdata(pdev); + + pci_disable_sriov(pdev); + + if (adapter) { + int i; + + if (is_offload(adapter)) + detach_ulds(adapter); + + for_each_port(adapter, i) + if (adapter->port[i]->reg_state == NETREG_REGISTERED) + unregister_netdev(adapter->port[i]); + + if (adapter->debugfs_root) + debugfs_remove_recursive(adapter->debugfs_root); + + if (adapter->flags & FULL_INIT_DONE) + cxgb_down(adapter); + + free_some_resources(adapter); + iounmap(adapter->regs); + kfree(adapter); + pci_disable_pcie_error_reporting(pdev); + pci_disable_device(pdev); + pci_release_regions(pdev); + pci_set_drvdata(pdev, NULL); + } else + pci_release_regions(pdev); +} + +static struct pci_driver cxgb4_driver = { + .name = KBUILD_MODNAME, + .id_table = cxgb4_pci_tbl, + .probe = init_one, + .remove = __devexit_p(remove_one), + .err_handler = &cxgb4_eeh, +}; + +static int __init cxgb4_init_module(void) +{ + int ret; + + /* Debugfs support is optional, just warn if this fails */ + cxgb4_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL); + if (!cxgb4_debugfs_root) + pr_warning("could not create debugfs entry, continuing\n"); + + ret = pci_register_driver(&cxgb4_driver); + if (ret < 0) + debugfs_remove(cxgb4_debugfs_root); + return ret; +} + +static void __exit cxgb4_cleanup_module(void) +{ + pci_unregister_driver(&cxgb4_driver); + debugfs_remove(cxgb4_debugfs_root); /* NULL ok */ +} + +module_init(cxgb4_init_module); +module_exit(cxgb4_cleanup_module); diff --cc drivers/net/ethernet/ibm/ibmveth.c index 72b84de48756,000000000000..4da972eaabb4 mode 100644,000000..100644 --- a/drivers/net/ethernet/ibm/ibmveth.c +++ b/drivers/net/ethernet/ibm/ibmveth.c @@@ -1,1638 -1,0 +1,1638 @@@ +/* + * IBM Power Virtual Ethernet Device Driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) IBM Corporation, 2003, 2010 + * + * Authors: Dave Larson + * Santiago Leon + * Brian King + * Robert Jennings + * Anton Blanchard + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ibmveth.h" + +static irqreturn_t ibmveth_interrupt(int irq, void *dev_instance); +static void ibmveth_rxq_harvest_buffer(struct ibmveth_adapter *adapter); +static unsigned long ibmveth_get_desired_dma(struct vio_dev *vdev); + +static struct kobj_type ktype_veth_pool; + + +static const char ibmveth_driver_name[] = "ibmveth"; +static const char ibmveth_driver_string[] = "IBM Power Virtual Ethernet Driver"; +#define ibmveth_driver_version "1.04" + +MODULE_AUTHOR("Santiago Leon "); +MODULE_DESCRIPTION("IBM Power Virtual Ethernet Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(ibmveth_driver_version); + +static unsigned int tx_copybreak __read_mostly = 128; +module_param(tx_copybreak, uint, 0644); +MODULE_PARM_DESC(tx_copybreak, + "Maximum size of packet that is copied to a new buffer on transmit"); + +static unsigned int rx_copybreak __read_mostly = 128; +module_param(rx_copybreak, uint, 0644); +MODULE_PARM_DESC(rx_copybreak, + "Maximum size of packet that is copied to a new buffer on receive"); + +static unsigned int rx_flush __read_mostly = 0; +module_param(rx_flush, uint, 0644); +MODULE_PARM_DESC(rx_flush, "Flush receive buffers before use"); + +struct ibmveth_stat { + char name[ETH_GSTRING_LEN]; + int offset; +}; + +#define IBMVETH_STAT_OFF(stat) offsetof(struct ibmveth_adapter, stat) +#define IBMVETH_GET_STAT(a, off) *((u64 *)(((unsigned long)(a)) + off)) + +struct ibmveth_stat ibmveth_stats[] = { + { "replenish_task_cycles", IBMVETH_STAT_OFF(replenish_task_cycles) }, + { "replenish_no_mem", IBMVETH_STAT_OFF(replenish_no_mem) }, + { "replenish_add_buff_failure", + IBMVETH_STAT_OFF(replenish_add_buff_failure) }, + { "replenish_add_buff_success", + IBMVETH_STAT_OFF(replenish_add_buff_success) }, + { "rx_invalid_buffer", IBMVETH_STAT_OFF(rx_invalid_buffer) }, + { "rx_no_buffer", IBMVETH_STAT_OFF(rx_no_buffer) }, + { "tx_map_failed", IBMVETH_STAT_OFF(tx_map_failed) }, + { "tx_send_failed", IBMVETH_STAT_OFF(tx_send_failed) }, + { "fw_enabled_ipv4_csum", IBMVETH_STAT_OFF(fw_ipv4_csum_support) }, + { "fw_enabled_ipv6_csum", IBMVETH_STAT_OFF(fw_ipv6_csum_support) }, +}; + +/* simple methods of getting data from the current rxq entry */ +static inline u32 ibmveth_rxq_flags(struct ibmveth_adapter *adapter) +{ + return adapter->rx_queue.queue_addr[adapter->rx_queue.index].flags_off; +} + +static inline int ibmveth_rxq_toggle(struct ibmveth_adapter *adapter) +{ + return (ibmveth_rxq_flags(adapter) & IBMVETH_RXQ_TOGGLE) >> + IBMVETH_RXQ_TOGGLE_SHIFT; +} + +static inline int ibmveth_rxq_pending_buffer(struct ibmveth_adapter *adapter) +{ + return ibmveth_rxq_toggle(adapter) == adapter->rx_queue.toggle; +} + +static inline int ibmveth_rxq_buffer_valid(struct ibmveth_adapter *adapter) +{ + return ibmveth_rxq_flags(adapter) & IBMVETH_RXQ_VALID; +} + +static inline int ibmveth_rxq_frame_offset(struct ibmveth_adapter *adapter) +{ + return ibmveth_rxq_flags(adapter) & IBMVETH_RXQ_OFF_MASK; +} + +static inline int ibmveth_rxq_frame_length(struct ibmveth_adapter *adapter) +{ + return adapter->rx_queue.queue_addr[adapter->rx_queue.index].length; +} + +static inline int ibmveth_rxq_csum_good(struct ibmveth_adapter *adapter) +{ + return ibmveth_rxq_flags(adapter) & IBMVETH_RXQ_CSUM_GOOD; +} + +/* setup the initial settings for a buffer pool */ +static void ibmveth_init_buffer_pool(struct ibmveth_buff_pool *pool, + u32 pool_index, u32 pool_size, + u32 buff_size, u32 pool_active) +{ + pool->size = pool_size; + pool->index = pool_index; + pool->buff_size = buff_size; + pool->threshold = pool_size * 7 / 8; + pool->active = pool_active; +} + +/* allocate and setup an buffer pool - called during open */ +static int ibmveth_alloc_buffer_pool(struct ibmveth_buff_pool *pool) +{ + int i; + + pool->free_map = kmalloc(sizeof(u16) * pool->size, GFP_KERNEL); + + if (!pool->free_map) + return -1; + + pool->dma_addr = kmalloc(sizeof(dma_addr_t) * pool->size, GFP_KERNEL); + if (!pool->dma_addr) { + kfree(pool->free_map); + pool->free_map = NULL; + return -1; + } + + pool->skbuff = kcalloc(pool->size, sizeof(void *), GFP_KERNEL); + + if (!pool->skbuff) { + kfree(pool->dma_addr); + pool->dma_addr = NULL; + + kfree(pool->free_map); + pool->free_map = NULL; + return -1; + } + + memset(pool->dma_addr, 0, sizeof(dma_addr_t) * pool->size); + + for (i = 0; i < pool->size; ++i) + pool->free_map[i] = i; + + atomic_set(&pool->available, 0); + pool->producer_index = 0; + pool->consumer_index = 0; + + return 0; +} + +static inline void ibmveth_flush_buffer(void *addr, unsigned long length) +{ + unsigned long offset; + + for (offset = 0; offset < length; offset += SMP_CACHE_BYTES) + asm("dcbfl %0,%1" :: "b" (addr), "r" (offset)); +} + +/* replenish the buffers for a pool. note that we don't need to + * skb_reserve these since they are used for incoming... + */ +static void ibmveth_replenish_buffer_pool(struct ibmveth_adapter *adapter, + struct ibmveth_buff_pool *pool) +{ + u32 i; + u32 count = pool->size - atomic_read(&pool->available); + u32 buffers_added = 0; + struct sk_buff *skb; + unsigned int free_index, index; + u64 correlator; + unsigned long lpar_rc; + dma_addr_t dma_addr; + + mb(); + + for (i = 0; i < count; ++i) { + union ibmveth_buf_desc desc; + + skb = netdev_alloc_skb(adapter->netdev, pool->buff_size); + + if (!skb) { + netdev_dbg(adapter->netdev, + "replenish: unable to allocate skb\n"); + adapter->replenish_no_mem++; + break; + } + + free_index = pool->consumer_index; + pool->consumer_index++; + if (pool->consumer_index >= pool->size) + pool->consumer_index = 0; + index = pool->free_map[free_index]; + + BUG_ON(index == IBM_VETH_INVALID_MAP); + BUG_ON(pool->skbuff[index] != NULL); + + dma_addr = dma_map_single(&adapter->vdev->dev, skb->data, + pool->buff_size, DMA_FROM_DEVICE); + + if (dma_mapping_error(&adapter->vdev->dev, dma_addr)) + goto failure; + + pool->free_map[free_index] = IBM_VETH_INVALID_MAP; + pool->dma_addr[index] = dma_addr; + pool->skbuff[index] = skb; + + correlator = ((u64)pool->index << 32) | index; + *(u64 *)skb->data = correlator; + + desc.fields.flags_len = IBMVETH_BUF_VALID | pool->buff_size; + desc.fields.address = dma_addr; + + if (rx_flush) { + unsigned int len = min(pool->buff_size, + adapter->netdev->mtu + + IBMVETH_BUFF_OH); + ibmveth_flush_buffer(skb->data, len); + } + lpar_rc = h_add_logical_lan_buffer(adapter->vdev->unit_address, + desc.desc); + + if (lpar_rc != H_SUCCESS) { + goto failure; + } else { + buffers_added++; + adapter->replenish_add_buff_success++; + } + } + + mb(); + atomic_add(buffers_added, &(pool->available)); + return; + +failure: + pool->free_map[free_index] = index; + pool->skbuff[index] = NULL; + if (pool->consumer_index == 0) + pool->consumer_index = pool->size - 1; + else + pool->consumer_index--; + if (!dma_mapping_error(&adapter->vdev->dev, dma_addr)) + dma_unmap_single(&adapter->vdev->dev, + pool->dma_addr[index], pool->buff_size, + DMA_FROM_DEVICE); + dev_kfree_skb_any(skb); + adapter->replenish_add_buff_failure++; + + mb(); + atomic_add(buffers_added, &(pool->available)); +} + +/* replenish routine */ +static void ibmveth_replenish_task(struct ibmveth_adapter *adapter) +{ + int i; + + adapter->replenish_task_cycles++; + + for (i = (IBMVETH_NUM_BUFF_POOLS - 1); i >= 0; i--) { + struct ibmveth_buff_pool *pool = &adapter->rx_buff_pool[i]; + + if (pool->active && + (atomic_read(&pool->available) < pool->threshold)) + ibmveth_replenish_buffer_pool(adapter, pool); + } + + adapter->rx_no_buffer = *(u64 *)(((char*)adapter->buffer_list_addr) + + 4096 - 8); +} + +/* empty and free ana buffer pool - also used to do cleanup in error paths */ +static void ibmveth_free_buffer_pool(struct ibmveth_adapter *adapter, + struct ibmveth_buff_pool *pool) +{ + int i; + + kfree(pool->free_map); + pool->free_map = NULL; + + if (pool->skbuff && pool->dma_addr) { + for (i = 0; i < pool->size; ++i) { + struct sk_buff *skb = pool->skbuff[i]; + if (skb) { + dma_unmap_single(&adapter->vdev->dev, + pool->dma_addr[i], + pool->buff_size, + DMA_FROM_DEVICE); + dev_kfree_skb_any(skb); + pool->skbuff[i] = NULL; + } + } + } + + if (pool->dma_addr) { + kfree(pool->dma_addr); + pool->dma_addr = NULL; + } + + if (pool->skbuff) { + kfree(pool->skbuff); + pool->skbuff = NULL; + } +} + +/* remove a buffer from a pool */ +static void ibmveth_remove_buffer_from_pool(struct ibmveth_adapter *adapter, + u64 correlator) +{ + unsigned int pool = correlator >> 32; + unsigned int index = correlator & 0xffffffffUL; + unsigned int free_index; + struct sk_buff *skb; + + BUG_ON(pool >= IBMVETH_NUM_BUFF_POOLS); + BUG_ON(index >= adapter->rx_buff_pool[pool].size); + + skb = adapter->rx_buff_pool[pool].skbuff[index]; + + BUG_ON(skb == NULL); + + adapter->rx_buff_pool[pool].skbuff[index] = NULL; + + dma_unmap_single(&adapter->vdev->dev, + adapter->rx_buff_pool[pool].dma_addr[index], + adapter->rx_buff_pool[pool].buff_size, + DMA_FROM_DEVICE); + + free_index = adapter->rx_buff_pool[pool].producer_index; + adapter->rx_buff_pool[pool].producer_index++; + if (adapter->rx_buff_pool[pool].producer_index >= + adapter->rx_buff_pool[pool].size) + adapter->rx_buff_pool[pool].producer_index = 0; + adapter->rx_buff_pool[pool].free_map[free_index] = index; + + mb(); + + atomic_dec(&(adapter->rx_buff_pool[pool].available)); +} + +/* get the current buffer on the rx queue */ +static inline struct sk_buff *ibmveth_rxq_get_buffer(struct ibmveth_adapter *adapter) +{ + u64 correlator = adapter->rx_queue.queue_addr[adapter->rx_queue.index].correlator; + unsigned int pool = correlator >> 32; + unsigned int index = correlator & 0xffffffffUL; + + BUG_ON(pool >= IBMVETH_NUM_BUFF_POOLS); + BUG_ON(index >= adapter->rx_buff_pool[pool].size); + + return adapter->rx_buff_pool[pool].skbuff[index]; +} + +/* recycle the current buffer on the rx queue */ +static int ibmveth_rxq_recycle_buffer(struct ibmveth_adapter *adapter) +{ + u32 q_index = adapter->rx_queue.index; + u64 correlator = adapter->rx_queue.queue_addr[q_index].correlator; + unsigned int pool = correlator >> 32; + unsigned int index = correlator & 0xffffffffUL; + union ibmveth_buf_desc desc; + unsigned long lpar_rc; + int ret = 1; + + BUG_ON(pool >= IBMVETH_NUM_BUFF_POOLS); + BUG_ON(index >= adapter->rx_buff_pool[pool].size); + + if (!adapter->rx_buff_pool[pool].active) { + ibmveth_rxq_harvest_buffer(adapter); + ibmveth_free_buffer_pool(adapter, &adapter->rx_buff_pool[pool]); + goto out; + } + + desc.fields.flags_len = IBMVETH_BUF_VALID | + adapter->rx_buff_pool[pool].buff_size; + desc.fields.address = adapter->rx_buff_pool[pool].dma_addr[index]; + + lpar_rc = h_add_logical_lan_buffer(adapter->vdev->unit_address, desc.desc); + + if (lpar_rc != H_SUCCESS) { + netdev_dbg(adapter->netdev, "h_add_logical_lan_buffer failed " + "during recycle rc=%ld", lpar_rc); + ibmveth_remove_buffer_from_pool(adapter, adapter->rx_queue.queue_addr[adapter->rx_queue.index].correlator); + ret = 0; + } + + if (++adapter->rx_queue.index == adapter->rx_queue.num_slots) { + adapter->rx_queue.index = 0; + adapter->rx_queue.toggle = !adapter->rx_queue.toggle; + } + +out: + return ret; +} + +static void ibmveth_rxq_harvest_buffer(struct ibmveth_adapter *adapter) +{ + ibmveth_remove_buffer_from_pool(adapter, adapter->rx_queue.queue_addr[adapter->rx_queue.index].correlator); + + if (++adapter->rx_queue.index == adapter->rx_queue.num_slots) { + adapter->rx_queue.index = 0; + adapter->rx_queue.toggle = !adapter->rx_queue.toggle; + } +} + +static void ibmveth_cleanup(struct ibmveth_adapter *adapter) +{ + int i; + struct device *dev = &adapter->vdev->dev; + + if (adapter->buffer_list_addr != NULL) { + if (!dma_mapping_error(dev, adapter->buffer_list_dma)) { + dma_unmap_single(dev, adapter->buffer_list_dma, 4096, + DMA_BIDIRECTIONAL); + adapter->buffer_list_dma = DMA_ERROR_CODE; + } + free_page((unsigned long)adapter->buffer_list_addr); + adapter->buffer_list_addr = NULL; + } + + if (adapter->filter_list_addr != NULL) { + if (!dma_mapping_error(dev, adapter->filter_list_dma)) { + dma_unmap_single(dev, adapter->filter_list_dma, 4096, + DMA_BIDIRECTIONAL); + adapter->filter_list_dma = DMA_ERROR_CODE; + } + free_page((unsigned long)adapter->filter_list_addr); + adapter->filter_list_addr = NULL; + } + + if (adapter->rx_queue.queue_addr != NULL) { + if (!dma_mapping_error(dev, adapter->rx_queue.queue_dma)) { + dma_unmap_single(dev, + adapter->rx_queue.queue_dma, + adapter->rx_queue.queue_len, + DMA_BIDIRECTIONAL); + adapter->rx_queue.queue_dma = DMA_ERROR_CODE; + } + kfree(adapter->rx_queue.queue_addr); + adapter->rx_queue.queue_addr = NULL; + } + + for (i = 0; i < IBMVETH_NUM_BUFF_POOLS; i++) + if (adapter->rx_buff_pool[i].active) + ibmveth_free_buffer_pool(adapter, + &adapter->rx_buff_pool[i]); + + if (adapter->bounce_buffer != NULL) { + if (!dma_mapping_error(dev, adapter->bounce_buffer_dma)) { + dma_unmap_single(&adapter->vdev->dev, + adapter->bounce_buffer_dma, + adapter->netdev->mtu + IBMVETH_BUFF_OH, + DMA_BIDIRECTIONAL); + adapter->bounce_buffer_dma = DMA_ERROR_CODE; + } + kfree(adapter->bounce_buffer); + adapter->bounce_buffer = NULL; + } +} + +static int ibmveth_register_logical_lan(struct ibmveth_adapter *adapter, + union ibmveth_buf_desc rxq_desc, u64 mac_address) +{ + int rc, try_again = 1; + + /* + * After a kexec the adapter will still be open, so our attempt to + * open it will fail. So if we get a failure we free the adapter and + * try again, but only once. + */ +retry: + rc = h_register_logical_lan(adapter->vdev->unit_address, + adapter->buffer_list_dma, rxq_desc.desc, + adapter->filter_list_dma, mac_address); + + if (rc != H_SUCCESS && try_again) { + do { + rc = h_free_logical_lan(adapter->vdev->unit_address); + } while (H_IS_LONG_BUSY(rc) || (rc == H_BUSY)); + + try_again = 0; + goto retry; + } + + return rc; +} + +static int ibmveth_open(struct net_device *netdev) +{ + struct ibmveth_adapter *adapter = netdev_priv(netdev); + u64 mac_address = 0; + int rxq_entries = 1; + unsigned long lpar_rc; + int rc; + union ibmveth_buf_desc rxq_desc; + int i; + struct device *dev; + + netdev_dbg(netdev, "open starting\n"); + + napi_enable(&adapter->napi); + + for(i = 0; i < IBMVETH_NUM_BUFF_POOLS; i++) + rxq_entries += adapter->rx_buff_pool[i].size; + + adapter->buffer_list_addr = (void*) get_zeroed_page(GFP_KERNEL); + adapter->filter_list_addr = (void*) get_zeroed_page(GFP_KERNEL); + + if (!adapter->buffer_list_addr || !adapter->filter_list_addr) { + netdev_err(netdev, "unable to allocate filter or buffer list " + "pages\n"); + rc = -ENOMEM; + goto err_out; + } + + adapter->rx_queue.queue_len = sizeof(struct ibmveth_rx_q_entry) * + rxq_entries; + adapter->rx_queue.queue_addr = kmalloc(adapter->rx_queue.queue_len, + GFP_KERNEL); + + if (!adapter->rx_queue.queue_addr) { + netdev_err(netdev, "unable to allocate rx queue pages\n"); + rc = -ENOMEM; + goto err_out; + } + + dev = &adapter->vdev->dev; + + adapter->buffer_list_dma = dma_map_single(dev, + adapter->buffer_list_addr, 4096, DMA_BIDIRECTIONAL); + adapter->filter_list_dma = dma_map_single(dev, + adapter->filter_list_addr, 4096, DMA_BIDIRECTIONAL); + adapter->rx_queue.queue_dma = dma_map_single(dev, + adapter->rx_queue.queue_addr, + adapter->rx_queue.queue_len, DMA_BIDIRECTIONAL); + + if ((dma_mapping_error(dev, adapter->buffer_list_dma)) || + (dma_mapping_error(dev, adapter->filter_list_dma)) || + (dma_mapping_error(dev, adapter->rx_queue.queue_dma))) { + netdev_err(netdev, "unable to map filter or buffer list " + "pages\n"); + rc = -ENOMEM; + goto err_out; + } + + adapter->rx_queue.index = 0; + adapter->rx_queue.num_slots = rxq_entries; + adapter->rx_queue.toggle = 1; + + memcpy(&mac_address, netdev->dev_addr, netdev->addr_len); + mac_address = mac_address >> 16; + + rxq_desc.fields.flags_len = IBMVETH_BUF_VALID | + adapter->rx_queue.queue_len; + rxq_desc.fields.address = adapter->rx_queue.queue_dma; + + netdev_dbg(netdev, "buffer list @ 0x%p\n", adapter->buffer_list_addr); + netdev_dbg(netdev, "filter list @ 0x%p\n", adapter->filter_list_addr); + netdev_dbg(netdev, "receive q @ 0x%p\n", adapter->rx_queue.queue_addr); + + h_vio_signal(adapter->vdev->unit_address, VIO_IRQ_DISABLE); + + lpar_rc = ibmveth_register_logical_lan(adapter, rxq_desc, mac_address); + + if (lpar_rc != H_SUCCESS) { + netdev_err(netdev, "h_register_logical_lan failed with %ld\n", + lpar_rc); + netdev_err(netdev, "buffer TCE:0x%llx filter TCE:0x%llx rxq " + "desc:0x%llx MAC:0x%llx\n", + adapter->buffer_list_dma, + adapter->filter_list_dma, + rxq_desc.desc, + mac_address); + rc = -ENONET; + goto err_out; + } + + for (i = 0; i < IBMVETH_NUM_BUFF_POOLS; i++) { + if (!adapter->rx_buff_pool[i].active) + continue; + if (ibmveth_alloc_buffer_pool(&adapter->rx_buff_pool[i])) { + netdev_err(netdev, "unable to alloc pool\n"); + adapter->rx_buff_pool[i].active = 0; + rc = -ENOMEM; + goto err_out; + } + } + + netdev_dbg(netdev, "registering irq 0x%x\n", netdev->irq); + rc = request_irq(netdev->irq, ibmveth_interrupt, 0, netdev->name, + netdev); + if (rc != 0) { + netdev_err(netdev, "unable to request irq 0x%x, rc %d\n", + netdev->irq, rc); + do { - rc = h_free_logical_lan(adapter->vdev->unit_address); - } while (H_IS_LONG_BUSY(rc) || (rc == H_BUSY)); ++ lpar_rc = h_free_logical_lan(adapter->vdev->unit_address); ++ } while (H_IS_LONG_BUSY(lpar_rc) || (lpar_rc == H_BUSY)); + + goto err_out; + } + + adapter->bounce_buffer = + kmalloc(netdev->mtu + IBMVETH_BUFF_OH, GFP_KERNEL); + if (!adapter->bounce_buffer) { + netdev_err(netdev, "unable to allocate bounce buffer\n"); + rc = -ENOMEM; + goto err_out_free_irq; + } + adapter->bounce_buffer_dma = + dma_map_single(&adapter->vdev->dev, adapter->bounce_buffer, + netdev->mtu + IBMVETH_BUFF_OH, DMA_BIDIRECTIONAL); + if (dma_mapping_error(dev, adapter->bounce_buffer_dma)) { + netdev_err(netdev, "unable to map bounce buffer\n"); + rc = -ENOMEM; + goto err_out_free_irq; + } + + netdev_dbg(netdev, "initial replenish cycle\n"); + ibmveth_interrupt(netdev->irq, netdev); + + netif_start_queue(netdev); + + netdev_dbg(netdev, "open complete\n"); + + return 0; + +err_out_free_irq: + free_irq(netdev->irq, netdev); +err_out: + ibmveth_cleanup(adapter); + napi_disable(&adapter->napi); + return rc; +} + +static int ibmveth_close(struct net_device *netdev) +{ + struct ibmveth_adapter *adapter = netdev_priv(netdev); + long lpar_rc; + + netdev_dbg(netdev, "close starting\n"); + + napi_disable(&adapter->napi); + + if (!adapter->pool_config) + netif_stop_queue(netdev); + + h_vio_signal(adapter->vdev->unit_address, VIO_IRQ_DISABLE); + + do { + lpar_rc = h_free_logical_lan(adapter->vdev->unit_address); + } while (H_IS_LONG_BUSY(lpar_rc) || (lpar_rc == H_BUSY)); + + if (lpar_rc != H_SUCCESS) { + netdev_err(netdev, "h_free_logical_lan failed with %lx, " + "continuing with close\n", lpar_rc); + } + + free_irq(netdev->irq, netdev); + + adapter->rx_no_buffer = *(u64 *)(((char *)adapter->buffer_list_addr) + + 4096 - 8); + + ibmveth_cleanup(adapter); + + netdev_dbg(netdev, "close complete\n"); + + return 0; +} + +static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + cmd->supported = (SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | + SUPPORTED_FIBRE); + cmd->advertising = (ADVERTISED_1000baseT_Full | ADVERTISED_Autoneg | + ADVERTISED_FIBRE); + ethtool_cmd_speed_set(cmd, SPEED_1000); + cmd->duplex = DUPLEX_FULL; + cmd->port = PORT_FIBRE; + cmd->phy_address = 0; + cmd->transceiver = XCVR_INTERNAL; + cmd->autoneg = AUTONEG_ENABLE; + cmd->maxtxpkt = 0; + cmd->maxrxpkt = 1; + return 0; +} + +static void netdev_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + strncpy(info->driver, ibmveth_driver_name, sizeof(info->driver) - 1); + strncpy(info->version, ibmveth_driver_version, + sizeof(info->version) - 1); +} + +static u32 ibmveth_fix_features(struct net_device *dev, u32 features) +{ + /* + * Since the ibmveth firmware interface does not have the + * concept of separate tx/rx checksum offload enable, if rx + * checksum is disabled we also have to disable tx checksum + * offload. Once we disable rx checksum offload, we are no + * longer allowed to send tx buffers that are not properly + * checksummed. + */ + + if (!(features & NETIF_F_RXCSUM)) + features &= ~NETIF_F_ALL_CSUM; + + return features; +} + +static int ibmveth_set_csum_offload(struct net_device *dev, u32 data) +{ + struct ibmveth_adapter *adapter = netdev_priv(dev); + unsigned long set_attr, clr_attr, ret_attr; + unsigned long set_attr6, clr_attr6; + long ret, ret4, ret6; + int rc1 = 0, rc2 = 0; + int restart = 0; + + if (netif_running(dev)) { + restart = 1; + adapter->pool_config = 1; + ibmveth_close(dev); + adapter->pool_config = 0; + } + + set_attr = 0; + clr_attr = 0; + set_attr6 = 0; + clr_attr6 = 0; + + if (data) { + set_attr = IBMVETH_ILLAN_IPV4_TCP_CSUM; + set_attr6 = IBMVETH_ILLAN_IPV6_TCP_CSUM; + } else { + clr_attr = IBMVETH_ILLAN_IPV4_TCP_CSUM; + clr_attr6 = IBMVETH_ILLAN_IPV6_TCP_CSUM; + } + + ret = h_illan_attributes(adapter->vdev->unit_address, 0, 0, &ret_attr); + + if (ret == H_SUCCESS && !(ret_attr & IBMVETH_ILLAN_ACTIVE_TRUNK) && + !(ret_attr & IBMVETH_ILLAN_TRUNK_PRI_MASK) && + (ret_attr & IBMVETH_ILLAN_PADDED_PKT_CSUM)) { + ret4 = h_illan_attributes(adapter->vdev->unit_address, clr_attr, + set_attr, &ret_attr); + + if (ret4 != H_SUCCESS) { + netdev_err(dev, "unable to change IPv4 checksum " + "offload settings. %d rc=%ld\n", + data, ret4); + + h_illan_attributes(adapter->vdev->unit_address, + set_attr, clr_attr, &ret_attr); + + if (data == 1) + dev->features &= ~NETIF_F_IP_CSUM; + + } else { + adapter->fw_ipv4_csum_support = data; + } + + ret6 = h_illan_attributes(adapter->vdev->unit_address, + clr_attr6, set_attr6, &ret_attr); + + if (ret6 != H_SUCCESS) { + netdev_err(dev, "unable to change IPv6 checksum " + "offload settings. %d rc=%ld\n", + data, ret6); + + h_illan_attributes(adapter->vdev->unit_address, + set_attr6, clr_attr6, &ret_attr); + + if (data == 1) + dev->features &= ~NETIF_F_IPV6_CSUM; + + } else + adapter->fw_ipv6_csum_support = data; + + if (ret4 == H_SUCCESS || ret6 == H_SUCCESS) + adapter->rx_csum = data; + else + rc1 = -EIO; + } else { + rc1 = -EIO; + netdev_err(dev, "unable to change checksum offload settings." + " %d rc=%ld ret_attr=%lx\n", data, ret, + ret_attr); + } + + if (restart) + rc2 = ibmveth_open(dev); + + return rc1 ? rc1 : rc2; +} + +static int ibmveth_set_features(struct net_device *dev, u32 features) +{ + struct ibmveth_adapter *adapter = netdev_priv(dev); + int rx_csum = !!(features & NETIF_F_RXCSUM); + int rc; + + if (rx_csum == adapter->rx_csum) + return 0; + + rc = ibmveth_set_csum_offload(dev, rx_csum); + if (rc && !adapter->rx_csum) + dev->features = features & ~(NETIF_F_ALL_CSUM | NETIF_F_RXCSUM); + + return rc; +} + +static void ibmveth_get_strings(struct net_device *dev, u32 stringset, u8 *data) +{ + int i; + + if (stringset != ETH_SS_STATS) + return; + + for (i = 0; i < ARRAY_SIZE(ibmveth_stats); i++, data += ETH_GSTRING_LEN) + memcpy(data, ibmveth_stats[i].name, ETH_GSTRING_LEN); +} + +static int ibmveth_get_sset_count(struct net_device *dev, int sset) +{ + switch (sset) { + case ETH_SS_STATS: + return ARRAY_SIZE(ibmveth_stats); + default: + return -EOPNOTSUPP; + } +} + +static void ibmveth_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, u64 *data) +{ + int i; + struct ibmveth_adapter *adapter = netdev_priv(dev); + + for (i = 0; i < ARRAY_SIZE(ibmveth_stats); i++) + data[i] = IBMVETH_GET_STAT(adapter, ibmveth_stats[i].offset); +} + +static const struct ethtool_ops netdev_ethtool_ops = { + .get_drvinfo = netdev_get_drvinfo, + .get_settings = netdev_get_settings, + .get_link = ethtool_op_get_link, + .get_strings = ibmveth_get_strings, + .get_sset_count = ibmveth_get_sset_count, + .get_ethtool_stats = ibmveth_get_ethtool_stats, +}; + +static int ibmveth_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + return -EOPNOTSUPP; +} + +#define page_offset(v) ((unsigned long)(v) & ((1 << 12) - 1)) + +static int ibmveth_send(struct ibmveth_adapter *adapter, + union ibmveth_buf_desc *descs) +{ + unsigned long correlator; + unsigned int retry_count; + unsigned long ret; + + /* + * The retry count sets a maximum for the number of broadcast and + * multicast destinations within the system. + */ + retry_count = 1024; + correlator = 0; + do { + ret = h_send_logical_lan(adapter->vdev->unit_address, + descs[0].desc, descs[1].desc, + descs[2].desc, descs[3].desc, + descs[4].desc, descs[5].desc, + correlator, &correlator); + } while ((ret == H_BUSY) && (retry_count--)); + + if (ret != H_SUCCESS && ret != H_DROPPED) { + netdev_err(adapter->netdev, "tx: h_send_logical_lan failed " + "with rc=%ld\n", ret); + return 1; + } + + return 0; +} + +static netdev_tx_t ibmveth_start_xmit(struct sk_buff *skb, + struct net_device *netdev) +{ + struct ibmveth_adapter *adapter = netdev_priv(netdev); + unsigned int desc_flags; + union ibmveth_buf_desc descs[6]; + int last, i; + int force_bounce = 0; + dma_addr_t dma_addr; + + /* + * veth handles a maximum of 6 segments including the header, so + * we have to linearize the skb if there are more than this. + */ + if (skb_shinfo(skb)->nr_frags > 5 && __skb_linearize(skb)) { + netdev->stats.tx_dropped++; + goto out; + } + + /* veth can't checksum offload UDP */ + if (skb->ip_summed == CHECKSUM_PARTIAL && + ((skb->protocol == htons(ETH_P_IP) && + ip_hdr(skb)->protocol != IPPROTO_TCP) || + (skb->protocol == htons(ETH_P_IPV6) && + ipv6_hdr(skb)->nexthdr != IPPROTO_TCP)) && + skb_checksum_help(skb)) { + + netdev_err(netdev, "tx: failed to checksum packet\n"); + netdev->stats.tx_dropped++; + goto out; + } + + desc_flags = IBMVETH_BUF_VALID; + + if (skb->ip_summed == CHECKSUM_PARTIAL) { + unsigned char *buf = skb_transport_header(skb) + + skb->csum_offset; + + desc_flags |= (IBMVETH_BUF_NO_CSUM | IBMVETH_BUF_CSUM_GOOD); + + /* Need to zero out the checksum */ + buf[0] = 0; + buf[1] = 0; + } + +retry_bounce: + memset(descs, 0, sizeof(descs)); + + /* + * If a linear packet is below the rx threshold then + * copy it into the static bounce buffer. This avoids the + * cost of a TCE insert and remove. + */ + if (force_bounce || (!skb_is_nonlinear(skb) && + (skb->len < tx_copybreak))) { + skb_copy_from_linear_data(skb, adapter->bounce_buffer, + skb->len); + + descs[0].fields.flags_len = desc_flags | skb->len; + descs[0].fields.address = adapter->bounce_buffer_dma; + + if (ibmveth_send(adapter, descs)) { + adapter->tx_send_failed++; + netdev->stats.tx_dropped++; + } else { + netdev->stats.tx_packets++; + netdev->stats.tx_bytes += skb->len; + } + + goto out; + } + + /* Map the header */ + dma_addr = dma_map_single(&adapter->vdev->dev, skb->data, + skb_headlen(skb), DMA_TO_DEVICE); + if (dma_mapping_error(&adapter->vdev->dev, dma_addr)) + goto map_failed; + + descs[0].fields.flags_len = desc_flags | skb_headlen(skb); + descs[0].fields.address = dma_addr; + + /* Map the frags */ + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + + dma_addr = skb_frag_dma_map(&adapter->vdev->dev, frag, 0, + frag->size, DMA_TO_DEVICE); + + if (dma_mapping_error(&adapter->vdev->dev, dma_addr)) + goto map_failed_frags; + + descs[i+1].fields.flags_len = desc_flags | frag->size; + descs[i+1].fields.address = dma_addr; + } + + if (ibmveth_send(adapter, descs)) { + adapter->tx_send_failed++; + netdev->stats.tx_dropped++; + } else { + netdev->stats.tx_packets++; + netdev->stats.tx_bytes += skb->len; + } + + dma_unmap_single(&adapter->vdev->dev, + descs[0].fields.address, + descs[0].fields.flags_len & IBMVETH_BUF_LEN_MASK, + DMA_TO_DEVICE); + + for (i = 1; i < skb_shinfo(skb)->nr_frags + 1; i++) + dma_unmap_page(&adapter->vdev->dev, descs[i].fields.address, + descs[i].fields.flags_len & IBMVETH_BUF_LEN_MASK, + DMA_TO_DEVICE); + +out: + dev_kfree_skb(skb); + return NETDEV_TX_OK; + +map_failed_frags: + last = i+1; + for (i = 0; i < last; i++) + dma_unmap_page(&adapter->vdev->dev, descs[i].fields.address, + descs[i].fields.flags_len & IBMVETH_BUF_LEN_MASK, + DMA_TO_DEVICE); + +map_failed: + if (!firmware_has_feature(FW_FEATURE_CMO)) + netdev_err(netdev, "tx: unable to map xmit buffer\n"); + adapter->tx_map_failed++; + skb_linearize(skb); + force_bounce = 1; + goto retry_bounce; +} + +static int ibmveth_poll(struct napi_struct *napi, int budget) +{ + struct ibmveth_adapter *adapter = + container_of(napi, struct ibmveth_adapter, napi); + struct net_device *netdev = adapter->netdev; + int frames_processed = 0; + unsigned long lpar_rc; + +restart_poll: + do { + if (!ibmveth_rxq_pending_buffer(adapter)) + break; + + smp_rmb(); + if (!ibmveth_rxq_buffer_valid(adapter)) { + wmb(); /* suggested by larson1 */ + adapter->rx_invalid_buffer++; + netdev_dbg(netdev, "recycling invalid buffer\n"); + ibmveth_rxq_recycle_buffer(adapter); + } else { + struct sk_buff *skb, *new_skb; + int length = ibmveth_rxq_frame_length(adapter); + int offset = ibmveth_rxq_frame_offset(adapter); + int csum_good = ibmveth_rxq_csum_good(adapter); + + skb = ibmveth_rxq_get_buffer(adapter); + + new_skb = NULL; + if (length < rx_copybreak) + new_skb = netdev_alloc_skb(netdev, length); + + if (new_skb) { + skb_copy_to_linear_data(new_skb, + skb->data + offset, + length); + if (rx_flush) + ibmveth_flush_buffer(skb->data, + length + offset); + if (!ibmveth_rxq_recycle_buffer(adapter)) + kfree_skb(skb); + skb = new_skb; + } else { + ibmveth_rxq_harvest_buffer(adapter); + skb_reserve(skb, offset); + } + + skb_put(skb, length); + skb->protocol = eth_type_trans(skb, netdev); + + if (csum_good) + skb->ip_summed = CHECKSUM_UNNECESSARY; + + netif_receive_skb(skb); /* send it up */ + + netdev->stats.rx_packets++; + netdev->stats.rx_bytes += length; + frames_processed++; + } + } while (frames_processed < budget); + + ibmveth_replenish_task(adapter); + + if (frames_processed < budget) { + /* We think we are done - reenable interrupts, + * then check once more to make sure we are done. + */ + lpar_rc = h_vio_signal(adapter->vdev->unit_address, + VIO_IRQ_ENABLE); + + BUG_ON(lpar_rc != H_SUCCESS); + + napi_complete(napi); + + if (ibmveth_rxq_pending_buffer(adapter) && + napi_reschedule(napi)) { + lpar_rc = h_vio_signal(adapter->vdev->unit_address, + VIO_IRQ_DISABLE); + goto restart_poll; + } + } + + return frames_processed; +} + +static irqreturn_t ibmveth_interrupt(int irq, void *dev_instance) +{ + struct net_device *netdev = dev_instance; + struct ibmveth_adapter *adapter = netdev_priv(netdev); + unsigned long lpar_rc; + + if (napi_schedule_prep(&adapter->napi)) { + lpar_rc = h_vio_signal(adapter->vdev->unit_address, + VIO_IRQ_DISABLE); + BUG_ON(lpar_rc != H_SUCCESS); + __napi_schedule(&adapter->napi); + } + return IRQ_HANDLED; +} + +static void ibmveth_set_multicast_list(struct net_device *netdev) +{ + struct ibmveth_adapter *adapter = netdev_priv(netdev); + unsigned long lpar_rc; + + if ((netdev->flags & IFF_PROMISC) || + (netdev_mc_count(netdev) > adapter->mcastFilterSize)) { + lpar_rc = h_multicast_ctrl(adapter->vdev->unit_address, + IbmVethMcastEnableRecv | + IbmVethMcastDisableFiltering, + 0); + if (lpar_rc != H_SUCCESS) { + netdev_err(netdev, "h_multicast_ctrl rc=%ld when " + "entering promisc mode\n", lpar_rc); + } + } else { + struct netdev_hw_addr *ha; + /* clear the filter table & disable filtering */ + lpar_rc = h_multicast_ctrl(adapter->vdev->unit_address, + IbmVethMcastEnableRecv | + IbmVethMcastDisableFiltering | + IbmVethMcastClearFilterTable, + 0); + if (lpar_rc != H_SUCCESS) { + netdev_err(netdev, "h_multicast_ctrl rc=%ld when " + "attempting to clear filter table\n", + lpar_rc); + } + /* add the addresses to the filter table */ + netdev_for_each_mc_addr(ha, netdev) { + /* add the multicast address to the filter table */ + unsigned long mcast_addr = 0; + memcpy(((char *)&mcast_addr)+2, ha->addr, 6); + lpar_rc = h_multicast_ctrl(adapter->vdev->unit_address, + IbmVethMcastAddFilter, + mcast_addr); + if (lpar_rc != H_SUCCESS) { + netdev_err(netdev, "h_multicast_ctrl rc=%ld " + "when adding an entry to the filter " + "table\n", lpar_rc); + } + } + + /* re-enable filtering */ + lpar_rc = h_multicast_ctrl(adapter->vdev->unit_address, + IbmVethMcastEnableFiltering, + 0); + if (lpar_rc != H_SUCCESS) { + netdev_err(netdev, "h_multicast_ctrl rc=%ld when " + "enabling filtering\n", lpar_rc); + } + } +} + +static int ibmveth_change_mtu(struct net_device *dev, int new_mtu) +{ + struct ibmveth_adapter *adapter = netdev_priv(dev); + struct vio_dev *viodev = adapter->vdev; + int new_mtu_oh = new_mtu + IBMVETH_BUFF_OH; + int i, rc; + int need_restart = 0; + + if (new_mtu < IBMVETH_MIN_MTU) + return -EINVAL; + + for (i = 0; i < IBMVETH_NUM_BUFF_POOLS; i++) + if (new_mtu_oh < adapter->rx_buff_pool[i].buff_size) + break; + + if (i == IBMVETH_NUM_BUFF_POOLS) + return -EINVAL; + + /* Deactivate all the buffer pools so that the next loop can activate + only the buffer pools necessary to hold the new MTU */ + if (netif_running(adapter->netdev)) { + need_restart = 1; + adapter->pool_config = 1; + ibmveth_close(adapter->netdev); + adapter->pool_config = 0; + } + + /* Look for an active buffer pool that can hold the new MTU */ + for (i = 0; i < IBMVETH_NUM_BUFF_POOLS; i++) { + adapter->rx_buff_pool[i].active = 1; + + if (new_mtu_oh < adapter->rx_buff_pool[i].buff_size) { + dev->mtu = new_mtu; + vio_cmo_set_dev_desired(viodev, + ibmveth_get_desired_dma + (viodev)); + if (need_restart) { + return ibmveth_open(adapter->netdev); + } + return 0; + } + } + + if (need_restart && (rc = ibmveth_open(adapter->netdev))) + return rc; + + return -EINVAL; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void ibmveth_poll_controller(struct net_device *dev) +{ + ibmveth_replenish_task(netdev_priv(dev)); + ibmveth_interrupt(dev->irq, dev); +} +#endif + +/** + * ibmveth_get_desired_dma - Calculate IO memory desired by the driver + * + * @vdev: struct vio_dev for the device whose desired IO mem is to be returned + * + * Return value: + * Number of bytes of IO data the driver will need to perform well. + */ +static unsigned long ibmveth_get_desired_dma(struct vio_dev *vdev) +{ + struct net_device *netdev = dev_get_drvdata(&vdev->dev); + struct ibmveth_adapter *adapter; + unsigned long ret; + int i; + int rxqentries = 1; + + /* netdev inits at probe time along with the structures we need below*/ + if (netdev == NULL) + return IOMMU_PAGE_ALIGN(IBMVETH_IO_ENTITLEMENT_DEFAULT); + + adapter = netdev_priv(netdev); + + ret = IBMVETH_BUFF_LIST_SIZE + IBMVETH_FILT_LIST_SIZE; + ret += IOMMU_PAGE_ALIGN(netdev->mtu); + + for (i = 0; i < IBMVETH_NUM_BUFF_POOLS; i++) { + /* add the size of the active receive buffers */ + if (adapter->rx_buff_pool[i].active) + ret += + adapter->rx_buff_pool[i].size * + IOMMU_PAGE_ALIGN(adapter->rx_buff_pool[i]. + buff_size); + rxqentries += adapter->rx_buff_pool[i].size; + } + /* add the size of the receive queue entries */ + ret += IOMMU_PAGE_ALIGN(rxqentries * sizeof(struct ibmveth_rx_q_entry)); + + return ret; +} + +static const struct net_device_ops ibmveth_netdev_ops = { + .ndo_open = ibmveth_open, + .ndo_stop = ibmveth_close, + .ndo_start_xmit = ibmveth_start_xmit, + .ndo_set_rx_mode = ibmveth_set_multicast_list, + .ndo_do_ioctl = ibmveth_ioctl, + .ndo_change_mtu = ibmveth_change_mtu, + .ndo_fix_features = ibmveth_fix_features, + .ndo_set_features = ibmveth_set_features, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = ibmveth_poll_controller, +#endif +}; + +static int __devinit ibmveth_probe(struct vio_dev *dev, + const struct vio_device_id *id) +{ + int rc, i; + struct net_device *netdev; + struct ibmveth_adapter *adapter; + unsigned char *mac_addr_p; + unsigned int *mcastFilterSize_p; + + dev_dbg(&dev->dev, "entering ibmveth_probe for UA 0x%x\n", + dev->unit_address); + + mac_addr_p = (unsigned char *)vio_get_attribute(dev, VETH_MAC_ADDR, + NULL); + if (!mac_addr_p) { + dev_err(&dev->dev, "Can't find VETH_MAC_ADDR attribute\n"); + return -EINVAL; + } + + mcastFilterSize_p = (unsigned int *)vio_get_attribute(dev, + VETH_MCAST_FILTER_SIZE, NULL); + if (!mcastFilterSize_p) { + dev_err(&dev->dev, "Can't find VETH_MCAST_FILTER_SIZE " + "attribute\n"); + return -EINVAL; + } + + netdev = alloc_etherdev(sizeof(struct ibmveth_adapter)); + + if (!netdev) + return -ENOMEM; + + adapter = netdev_priv(netdev); + dev_set_drvdata(&dev->dev, netdev); + + adapter->vdev = dev; + adapter->netdev = netdev; + adapter->mcastFilterSize = *mcastFilterSize_p; + adapter->pool_config = 0; + + netif_napi_add(netdev, &adapter->napi, ibmveth_poll, 16); + + /* + * Some older boxes running PHYP non-natively have an OF that returns + * a 8-byte local-mac-address field (and the first 2 bytes have to be + * ignored) while newer boxes' OF return a 6-byte field. Note that + * IEEE 1275 specifies that local-mac-address must be a 6-byte field. + * The RPA doc specifies that the first byte must be 10b, so we'll + * just look for it to solve this 8 vs. 6 byte field issue + */ + if ((*mac_addr_p & 0x3) != 0x02) + mac_addr_p += 2; + + adapter->mac_addr = 0; + memcpy(&adapter->mac_addr, mac_addr_p, 6); + + netdev->irq = dev->irq; + netdev->netdev_ops = &ibmveth_netdev_ops; + netdev->ethtool_ops = &netdev_ethtool_ops; + SET_NETDEV_DEV(netdev, &dev->dev); + netdev->hw_features = NETIF_F_SG | NETIF_F_RXCSUM | + NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; + netdev->features |= netdev->hw_features; + + memcpy(netdev->dev_addr, &adapter->mac_addr, netdev->addr_len); + + for (i = 0; i < IBMVETH_NUM_BUFF_POOLS; i++) { + struct kobject *kobj = &adapter->rx_buff_pool[i].kobj; + int error; + + ibmveth_init_buffer_pool(&adapter->rx_buff_pool[i], i, + pool_count[i], pool_size[i], + pool_active[i]); + error = kobject_init_and_add(kobj, &ktype_veth_pool, + &dev->dev.kobj, "pool%d", i); + if (!error) + kobject_uevent(kobj, KOBJ_ADD); + } + + netdev_dbg(netdev, "adapter @ 0x%p\n", adapter); + + adapter->buffer_list_dma = DMA_ERROR_CODE; + adapter->filter_list_dma = DMA_ERROR_CODE; + adapter->rx_queue.queue_dma = DMA_ERROR_CODE; + + netdev_dbg(netdev, "registering netdev...\n"); + + ibmveth_set_features(netdev, netdev->features); + + rc = register_netdev(netdev); + + if (rc) { + netdev_dbg(netdev, "failed to register netdev rc=%d\n", rc); + free_netdev(netdev); + return rc; + } + + netdev_dbg(netdev, "registered\n"); + + return 0; +} + +static int __devexit ibmveth_remove(struct vio_dev *dev) +{ + struct net_device *netdev = dev_get_drvdata(&dev->dev); + struct ibmveth_adapter *adapter = netdev_priv(netdev); + int i; + + for (i = 0; i < IBMVETH_NUM_BUFF_POOLS; i++) + kobject_put(&adapter->rx_buff_pool[i].kobj); + + unregister_netdev(netdev); + + free_netdev(netdev); + dev_set_drvdata(&dev->dev, NULL); + + return 0; +} + +static struct attribute veth_active_attr; +static struct attribute veth_num_attr; +static struct attribute veth_size_attr; + +static ssize_t veth_pool_show(struct kobject *kobj, + struct attribute *attr, char *buf) +{ + struct ibmveth_buff_pool *pool = container_of(kobj, + struct ibmveth_buff_pool, + kobj); + + if (attr == &veth_active_attr) + return sprintf(buf, "%d\n", pool->active); + else if (attr == &veth_num_attr) + return sprintf(buf, "%d\n", pool->size); + else if (attr == &veth_size_attr) + return sprintf(buf, "%d\n", pool->buff_size); + return 0; +} + +static ssize_t veth_pool_store(struct kobject *kobj, struct attribute *attr, + const char *buf, size_t count) +{ + struct ibmveth_buff_pool *pool = container_of(kobj, + struct ibmveth_buff_pool, + kobj); + struct net_device *netdev = dev_get_drvdata( + container_of(kobj->parent, struct device, kobj)); + struct ibmveth_adapter *adapter = netdev_priv(netdev); + long value = simple_strtol(buf, NULL, 10); + long rc; + + if (attr == &veth_active_attr) { + if (value && !pool->active) { + if (netif_running(netdev)) { + if (ibmveth_alloc_buffer_pool(pool)) { + netdev_err(netdev, + "unable to alloc pool\n"); + return -ENOMEM; + } + pool->active = 1; + adapter->pool_config = 1; + ibmveth_close(netdev); + adapter->pool_config = 0; + if ((rc = ibmveth_open(netdev))) + return rc; + } else { + pool->active = 1; + } + } else if (!value && pool->active) { + int mtu = netdev->mtu + IBMVETH_BUFF_OH; + int i; + /* Make sure there is a buffer pool with buffers that + can hold a packet of the size of the MTU */ + for (i = 0; i < IBMVETH_NUM_BUFF_POOLS; i++) { + if (pool == &adapter->rx_buff_pool[i]) + continue; + if (!adapter->rx_buff_pool[i].active) + continue; + if (mtu <= adapter->rx_buff_pool[i].buff_size) + break; + } + + if (i == IBMVETH_NUM_BUFF_POOLS) { + netdev_err(netdev, "no active pool >= MTU\n"); + return -EPERM; + } + + if (netif_running(netdev)) { + adapter->pool_config = 1; + ibmveth_close(netdev); + pool->active = 0; + adapter->pool_config = 0; + if ((rc = ibmveth_open(netdev))) + return rc; + } + pool->active = 0; + } + } else if (attr == &veth_num_attr) { + if (value <= 0 || value > IBMVETH_MAX_POOL_COUNT) { + return -EINVAL; + } else { + if (netif_running(netdev)) { + adapter->pool_config = 1; + ibmveth_close(netdev); + adapter->pool_config = 0; + pool->size = value; + if ((rc = ibmveth_open(netdev))) + return rc; + } else { + pool->size = value; + } + } + } else if (attr == &veth_size_attr) { + if (value <= IBMVETH_BUFF_OH || value > IBMVETH_MAX_BUF_SIZE) { + return -EINVAL; + } else { + if (netif_running(netdev)) { + adapter->pool_config = 1; + ibmveth_close(netdev); + adapter->pool_config = 0; + pool->buff_size = value; + if ((rc = ibmveth_open(netdev))) + return rc; + } else { + pool->buff_size = value; + } + } + } + + /* kick the interrupt handler to allocate/deallocate pools */ + ibmveth_interrupt(netdev->irq, netdev); + return count; +} + + +#define ATTR(_name, _mode) \ + struct attribute veth_##_name##_attr = { \ + .name = __stringify(_name), .mode = _mode, \ + }; + +static ATTR(active, 0644); +static ATTR(num, 0644); +static ATTR(size, 0644); + +static struct attribute *veth_pool_attrs[] = { + &veth_active_attr, + &veth_num_attr, + &veth_size_attr, + NULL, +}; + +static const struct sysfs_ops veth_pool_ops = { + .show = veth_pool_show, + .store = veth_pool_store, +}; + +static struct kobj_type ktype_veth_pool = { + .release = NULL, + .sysfs_ops = &veth_pool_ops, + .default_attrs = veth_pool_attrs, +}; + +static int ibmveth_resume(struct device *dev) +{ + struct net_device *netdev = dev_get_drvdata(dev); + ibmveth_interrupt(netdev->irq, netdev); + return 0; +} + +static struct vio_device_id ibmveth_device_table[] __devinitdata = { + { "network", "IBM,l-lan"}, + { "", "" } +}; +MODULE_DEVICE_TABLE(vio, ibmveth_device_table); + +static struct dev_pm_ops ibmveth_pm_ops = { + .resume = ibmveth_resume +}; + +static struct vio_driver ibmveth_driver = { + .id_table = ibmveth_device_table, + .probe = ibmveth_probe, + .remove = ibmveth_remove, + .get_desired_dma = ibmveth_get_desired_dma, + .driver = { + .name = ibmveth_driver_name, + .owner = THIS_MODULE, + .pm = &ibmveth_pm_ops, + } +}; + +static int __init ibmveth_module_init(void) +{ + printk(KERN_DEBUG "%s: %s %s\n", ibmveth_driver_name, + ibmveth_driver_string, ibmveth_driver_version); + + return vio_register_driver(&ibmveth_driver); +} + +static void __exit ibmveth_module_exit(void) +{ + vio_unregister_driver(&ibmveth_driver); +} + +module_init(ibmveth_module_init); +module_exit(ibmveth_module_exit); diff --cc drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c index 5dc61b4ef3cd,000000000000..b89f3a684aec mode 100644,000000..100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c @@@ -1,2606 -1,0 +1,2604 @@@ +/* + * Copyright (C) 1999 - 2010 Intel Corporation. + * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD. + * + * This code was derived from the Intel e1000e Linux driver. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + */ + +#include "pch_gbe.h" +#include "pch_gbe_api.h" + +#define DRV_VERSION "1.00" +const char pch_driver_version[] = DRV_VERSION; + +#define PCI_DEVICE_ID_INTEL_IOH1_GBE 0x8802 /* Pci device ID */ +#define PCH_GBE_MAR_ENTRIES 16 +#define PCH_GBE_SHORT_PKT 64 +#define DSC_INIT16 0xC000 +#define PCH_GBE_DMA_ALIGN 0 +#define PCH_GBE_DMA_PADDING 2 +#define PCH_GBE_WATCHDOG_PERIOD (1 * HZ) /* watchdog time */ +#define PCH_GBE_COPYBREAK_DEFAULT 256 +#define PCH_GBE_PCI_BAR 1 +#define PCH_GBE_RESERVE_MEMORY 0x200000 /* 2MB */ + +/* Macros for ML7223 */ +#define PCI_VENDOR_ID_ROHM 0x10db +#define PCI_DEVICE_ID_ROHM_ML7223_GBE 0x8013 + +/* Macros for ML7831 */ +#define PCI_DEVICE_ID_ROHM_ML7831_GBE 0x8802 + +#define PCH_GBE_TX_WEIGHT 64 +#define PCH_GBE_RX_WEIGHT 64 +#define PCH_GBE_RX_BUFFER_WRITE 16 + +/* Initialize the wake-on-LAN settings */ +#define PCH_GBE_WL_INIT_SETTING (PCH_GBE_WLC_MP) + +#define PCH_GBE_MAC_RGMII_CTRL_SETTING ( \ + PCH_GBE_CHIP_TYPE_INTERNAL | \ + PCH_GBE_RGMII_MODE_RGMII \ + ) + +/* Ethertype field values */ +#define PCH_GBE_MAX_RX_BUFFER_SIZE 0x2880 +#define PCH_GBE_MAX_JUMBO_FRAME_SIZE 10318 +#define PCH_GBE_FRAME_SIZE_2048 2048 +#define PCH_GBE_FRAME_SIZE_4096 4096 +#define PCH_GBE_FRAME_SIZE_8192 8192 + +#define PCH_GBE_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i])) +#define PCH_GBE_RX_DESC(R, i) PCH_GBE_GET_DESC(R, i, pch_gbe_rx_desc) +#define PCH_GBE_TX_DESC(R, i) PCH_GBE_GET_DESC(R, i, pch_gbe_tx_desc) +#define PCH_GBE_DESC_UNUSED(R) \ + ((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \ + (R)->next_to_clean - (R)->next_to_use - 1) + +/* Pause packet value */ +#define PCH_GBE_PAUSE_PKT1_VALUE 0x00C28001 +#define PCH_GBE_PAUSE_PKT2_VALUE 0x00000100 +#define PCH_GBE_PAUSE_PKT4_VALUE 0x01000888 +#define PCH_GBE_PAUSE_PKT5_VALUE 0x0000FFFF + +#define PCH_GBE_ETH_ALEN 6 + +/* This defines the bits that are set in the Interrupt Mask + * Set/Read Register. Each bit is documented below: + * o RXT0 = Receiver Timer Interrupt (ring 0) + * o TXDW = Transmit Descriptor Written Back + * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0) + * o RXSEQ = Receive Sequence Error + * o LSC = Link Status Change + */ +#define PCH_GBE_INT_ENABLE_MASK ( \ + PCH_GBE_INT_RX_DMA_CMPLT | \ + PCH_GBE_INT_RX_DSC_EMP | \ + PCH_GBE_INT_RX_FIFO_ERR | \ + PCH_GBE_INT_WOL_DET | \ + PCH_GBE_INT_TX_CMPLT \ + ) + +#define PCH_GBE_INT_DISABLE_ALL 0 + +static unsigned int copybreak __read_mostly = PCH_GBE_COPYBREAK_DEFAULT; + +static int pch_gbe_mdio_read(struct net_device *netdev, int addr, int reg); +static void pch_gbe_mdio_write(struct net_device *netdev, int addr, int reg, + int data); + +inline void pch_gbe_mac_load_mac_addr(struct pch_gbe_hw *hw) +{ + iowrite32(0x01, &hw->reg->MAC_ADDR_LOAD); +} + +/** + * pch_gbe_mac_read_mac_addr - Read MAC address + * @hw: Pointer to the HW structure + * Returns + * 0: Successful. + */ +s32 pch_gbe_mac_read_mac_addr(struct pch_gbe_hw *hw) +{ + u32 adr1a, adr1b; + + adr1a = ioread32(&hw->reg->mac_adr[0].high); + adr1b = ioread32(&hw->reg->mac_adr[0].low); + + hw->mac.addr[0] = (u8)(adr1a & 0xFF); + hw->mac.addr[1] = (u8)((adr1a >> 8) & 0xFF); + hw->mac.addr[2] = (u8)((adr1a >> 16) & 0xFF); + hw->mac.addr[3] = (u8)((adr1a >> 24) & 0xFF); + hw->mac.addr[4] = (u8)(adr1b & 0xFF); + hw->mac.addr[5] = (u8)((adr1b >> 8) & 0xFF); + + pr_debug("hw->mac.addr : %pM\n", hw->mac.addr); + return 0; +} + +/** + * pch_gbe_wait_clr_bit - Wait to clear a bit + * @reg: Pointer of register + * @busy: Busy bit + */ +static void pch_gbe_wait_clr_bit(void *reg, u32 bit) +{ + u32 tmp; + /* wait busy */ + tmp = 1000; + while ((ioread32(reg) & bit) && --tmp) + cpu_relax(); + if (!tmp) + pr_err("Error: busy bit is not cleared\n"); +} + +/** + * pch_gbe_wait_clr_bit_irq - Wait to clear a bit for interrupt context + * @reg: Pointer of register + * @busy: Busy bit + */ +static int pch_gbe_wait_clr_bit_irq(void *reg, u32 bit) +{ + u32 tmp; + int ret = -1; + /* wait busy */ + tmp = 20; + while ((ioread32(reg) & bit) && --tmp) + udelay(5); + if (!tmp) + pr_err("Error: busy bit is not cleared\n"); + else + ret = 0; + return ret; +} + +/** + * pch_gbe_mac_mar_set - Set MAC address register + * @hw: Pointer to the HW structure + * @addr: Pointer to the MAC address + * @index: MAC address array register + */ +static void pch_gbe_mac_mar_set(struct pch_gbe_hw *hw, u8 * addr, u32 index) +{ + u32 mar_low, mar_high, adrmask; + + pr_debug("index : 0x%x\n", index); + + /* + * HW expects these in little endian so we reverse the byte order + * from network order (big endian) to little endian + */ + mar_high = ((u32) addr[0] | ((u32) addr[1] << 8) | + ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); + mar_low = ((u32) addr[4] | ((u32) addr[5] << 8)); + /* Stop the MAC Address of index. */ + adrmask = ioread32(&hw->reg->ADDR_MASK); + iowrite32((adrmask | (0x0001 << index)), &hw->reg->ADDR_MASK); + /* wait busy */ + pch_gbe_wait_clr_bit(&hw->reg->ADDR_MASK, PCH_GBE_BUSY); + /* Set the MAC address to the MAC address 1A/1B register */ + iowrite32(mar_high, &hw->reg->mac_adr[index].high); + iowrite32(mar_low, &hw->reg->mac_adr[index].low); + /* Start the MAC address of index */ + iowrite32((adrmask & ~(0x0001 << index)), &hw->reg->ADDR_MASK); + /* wait busy */ + pch_gbe_wait_clr_bit(&hw->reg->ADDR_MASK, PCH_GBE_BUSY); +} + +/** + * pch_gbe_mac_reset_hw - Reset hardware + * @hw: Pointer to the HW structure + */ +static void pch_gbe_mac_reset_hw(struct pch_gbe_hw *hw) +{ + /* Read the MAC address. and store to the private data */ + pch_gbe_mac_read_mac_addr(hw); + iowrite32(PCH_GBE_ALL_RST, &hw->reg->RESET); +#ifdef PCH_GBE_MAC_IFOP_RGMII + iowrite32(PCH_GBE_MODE_GMII_ETHER, &hw->reg->MODE); +#endif + pch_gbe_wait_clr_bit(&hw->reg->RESET, PCH_GBE_ALL_RST); + /* Setup the receive address */ + pch_gbe_mac_mar_set(hw, hw->mac.addr, 0); + return; +} + +static void pch_gbe_mac_reset_rx(struct pch_gbe_hw *hw) +{ + /* Read the MAC address. and store to the private data */ + pch_gbe_mac_read_mac_addr(hw); + iowrite32(PCH_GBE_RX_RST, &hw->reg->RESET); + pch_gbe_wait_clr_bit_irq(&hw->reg->RESET, PCH_GBE_RX_RST); + /* Setup the MAC address */ + pch_gbe_mac_mar_set(hw, hw->mac.addr, 0); + return; +} + +/** + * pch_gbe_mac_init_rx_addrs - Initialize receive address's + * @hw: Pointer to the HW structure + * @mar_count: Receive address registers + */ +static void pch_gbe_mac_init_rx_addrs(struct pch_gbe_hw *hw, u16 mar_count) +{ + u32 i; + + /* Setup the receive address */ + pch_gbe_mac_mar_set(hw, hw->mac.addr, 0); + + /* Zero out the other receive addresses */ + for (i = 1; i < mar_count; i++) { + iowrite32(0, &hw->reg->mac_adr[i].high); + iowrite32(0, &hw->reg->mac_adr[i].low); + } + iowrite32(0xFFFE, &hw->reg->ADDR_MASK); + /* wait busy */ + pch_gbe_wait_clr_bit(&hw->reg->ADDR_MASK, PCH_GBE_BUSY); +} + + +/** + * pch_gbe_mac_mc_addr_list_update - Update Multicast addresses + * @hw: Pointer to the HW structure + * @mc_addr_list: Array of multicast addresses to program + * @mc_addr_count: Number of multicast addresses to program + * @mar_used_count: The first MAC Address register free to program + * @mar_total_num: Total number of supported MAC Address Registers + */ +static void pch_gbe_mac_mc_addr_list_update(struct pch_gbe_hw *hw, + u8 *mc_addr_list, u32 mc_addr_count, + u32 mar_used_count, u32 mar_total_num) +{ + u32 i, adrmask; + + /* Load the first set of multicast addresses into the exact + * filters (RAR). If there are not enough to fill the RAR + * array, clear the filters. + */ + for (i = mar_used_count; i < mar_total_num; i++) { + if (mc_addr_count) { + pch_gbe_mac_mar_set(hw, mc_addr_list, i); + mc_addr_count--; + mc_addr_list += PCH_GBE_ETH_ALEN; + } else { + /* Clear MAC address mask */ + adrmask = ioread32(&hw->reg->ADDR_MASK); + iowrite32((adrmask | (0x0001 << i)), + &hw->reg->ADDR_MASK); + /* wait busy */ + pch_gbe_wait_clr_bit(&hw->reg->ADDR_MASK, PCH_GBE_BUSY); + /* Clear MAC address */ + iowrite32(0, &hw->reg->mac_adr[i].high); + iowrite32(0, &hw->reg->mac_adr[i].low); + } + } +} + +/** + * pch_gbe_mac_force_mac_fc - Force the MAC's flow control settings + * @hw: Pointer to the HW structure + * Returns + * 0: Successful. + * Negative value: Failed. + */ +s32 pch_gbe_mac_force_mac_fc(struct pch_gbe_hw *hw) +{ + struct pch_gbe_mac_info *mac = &hw->mac; + u32 rx_fctrl; + + pr_debug("mac->fc = %u\n", mac->fc); + + rx_fctrl = ioread32(&hw->reg->RX_FCTRL); + + switch (mac->fc) { + case PCH_GBE_FC_NONE: + rx_fctrl &= ~PCH_GBE_FL_CTRL_EN; + mac->tx_fc_enable = false; + break; + case PCH_GBE_FC_RX_PAUSE: + rx_fctrl |= PCH_GBE_FL_CTRL_EN; + mac->tx_fc_enable = false; + break; + case PCH_GBE_FC_TX_PAUSE: + rx_fctrl &= ~PCH_GBE_FL_CTRL_EN; + mac->tx_fc_enable = true; + break; + case PCH_GBE_FC_FULL: + rx_fctrl |= PCH_GBE_FL_CTRL_EN; + mac->tx_fc_enable = true; + break; + default: + pr_err("Flow control param set incorrectly\n"); + return -EINVAL; + } + if (mac->link_duplex == DUPLEX_HALF) + rx_fctrl &= ~PCH_GBE_FL_CTRL_EN; + iowrite32(rx_fctrl, &hw->reg->RX_FCTRL); + pr_debug("RX_FCTRL reg : 0x%08x mac->tx_fc_enable : %d\n", + ioread32(&hw->reg->RX_FCTRL), mac->tx_fc_enable); + return 0; +} + +/** + * pch_gbe_mac_set_wol_event - Set wake-on-lan event + * @hw: Pointer to the HW structure + * @wu_evt: Wake up event + */ +static void pch_gbe_mac_set_wol_event(struct pch_gbe_hw *hw, u32 wu_evt) +{ + u32 addr_mask; + + pr_debug("wu_evt : 0x%08x ADDR_MASK reg : 0x%08x\n", + wu_evt, ioread32(&hw->reg->ADDR_MASK)); + + if (wu_evt) { + /* Set Wake-On-Lan address mask */ + addr_mask = ioread32(&hw->reg->ADDR_MASK); + iowrite32(addr_mask, &hw->reg->WOL_ADDR_MASK); + /* wait busy */ + pch_gbe_wait_clr_bit(&hw->reg->WOL_ADDR_MASK, PCH_GBE_WLA_BUSY); + iowrite32(0, &hw->reg->WOL_ST); + iowrite32((wu_evt | PCH_GBE_WLC_WOL_MODE), &hw->reg->WOL_CTRL); + iowrite32(0x02, &hw->reg->TCPIP_ACC); + iowrite32(PCH_GBE_INT_ENABLE_MASK, &hw->reg->INT_EN); + } else { + iowrite32(0, &hw->reg->WOL_CTRL); + iowrite32(0, &hw->reg->WOL_ST); + } + return; +} + +/** + * pch_gbe_mac_ctrl_miim - Control MIIM interface + * @hw: Pointer to the HW structure + * @addr: Address of PHY + * @dir: Operetion. (Write or Read) + * @reg: Access register of PHY + * @data: Write data. + * + * Returns: Read date. + */ +u16 pch_gbe_mac_ctrl_miim(struct pch_gbe_hw *hw, u32 addr, u32 dir, u32 reg, + u16 data) +{ + u32 data_out = 0; + unsigned int i; + unsigned long flags; + + spin_lock_irqsave(&hw->miim_lock, flags); + + for (i = 100; i; --i) { + if ((ioread32(&hw->reg->MIIM) & PCH_GBE_MIIM_OPER_READY)) + break; + udelay(20); + } + if (i == 0) { + pr_err("pch-gbe.miim won't go Ready\n"); + spin_unlock_irqrestore(&hw->miim_lock, flags); + return 0; /* No way to indicate timeout error */ + } + iowrite32(((reg << PCH_GBE_MIIM_REG_ADDR_SHIFT) | + (addr << PCH_GBE_MIIM_PHY_ADDR_SHIFT) | + dir | data), &hw->reg->MIIM); + for (i = 0; i < 100; i++) { + udelay(20); + data_out = ioread32(&hw->reg->MIIM); + if ((data_out & PCH_GBE_MIIM_OPER_READY)) + break; + } + spin_unlock_irqrestore(&hw->miim_lock, flags); + + pr_debug("PHY %s: reg=%d, data=0x%04X\n", + dir == PCH_GBE_MIIM_OPER_READ ? "READ" : "WRITE", reg, + dir == PCH_GBE_MIIM_OPER_READ ? data_out : data); + return (u16) data_out; +} + +/** + * pch_gbe_mac_set_pause_packet - Set pause packet + * @hw: Pointer to the HW structure + */ +static void pch_gbe_mac_set_pause_packet(struct pch_gbe_hw *hw) +{ + unsigned long tmp2, tmp3; + + /* Set Pause packet */ + tmp2 = hw->mac.addr[1]; + tmp2 = (tmp2 << 8) | hw->mac.addr[0]; + tmp2 = PCH_GBE_PAUSE_PKT2_VALUE | (tmp2 << 16); + + tmp3 = hw->mac.addr[5]; + tmp3 = (tmp3 << 8) | hw->mac.addr[4]; + tmp3 = (tmp3 << 8) | hw->mac.addr[3]; + tmp3 = (tmp3 << 8) | hw->mac.addr[2]; + + iowrite32(PCH_GBE_PAUSE_PKT1_VALUE, &hw->reg->PAUSE_PKT1); + iowrite32(tmp2, &hw->reg->PAUSE_PKT2); + iowrite32(tmp3, &hw->reg->PAUSE_PKT3); + iowrite32(PCH_GBE_PAUSE_PKT4_VALUE, &hw->reg->PAUSE_PKT4); + iowrite32(PCH_GBE_PAUSE_PKT5_VALUE, &hw->reg->PAUSE_PKT5); + + /* Transmit Pause Packet */ + iowrite32(PCH_GBE_PS_PKT_RQ, &hw->reg->PAUSE_REQ); + + pr_debug("PAUSE_PKT1-5 reg : 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", + ioread32(&hw->reg->PAUSE_PKT1), ioread32(&hw->reg->PAUSE_PKT2), + ioread32(&hw->reg->PAUSE_PKT3), ioread32(&hw->reg->PAUSE_PKT4), + ioread32(&hw->reg->PAUSE_PKT5)); + + return; +} + + +/** + * pch_gbe_alloc_queues - Allocate memory for all rings + * @adapter: Board private structure to initialize + * Returns + * 0: Successfully + * Negative value: Failed + */ +static int pch_gbe_alloc_queues(struct pch_gbe_adapter *adapter) +{ + int size; + + size = (int)sizeof(struct pch_gbe_tx_ring); + adapter->tx_ring = kzalloc(size, GFP_KERNEL); + if (!adapter->tx_ring) + return -ENOMEM; + size = (int)sizeof(struct pch_gbe_rx_ring); + adapter->rx_ring = kzalloc(size, GFP_KERNEL); + if (!adapter->rx_ring) { + kfree(adapter->tx_ring); + return -ENOMEM; + } + return 0; +} + +/** + * pch_gbe_init_stats - Initialize status + * @adapter: Board private structure to initialize + */ +static void pch_gbe_init_stats(struct pch_gbe_adapter *adapter) +{ + memset(&adapter->stats, 0, sizeof(adapter->stats)); + return; +} + +/** + * pch_gbe_init_phy - Initialize PHY + * @adapter: Board private structure to initialize + * Returns + * 0: Successfully + * Negative value: Failed + */ +static int pch_gbe_init_phy(struct pch_gbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + u32 addr; + u16 bmcr, stat; + + /* Discover phy addr by searching addrs in order {1,0,2,..., 31} */ + for (addr = 0; addr < PCH_GBE_PHY_REGS_LEN; addr++) { + adapter->mii.phy_id = (addr == 0) ? 1 : (addr == 1) ? 0 : addr; + bmcr = pch_gbe_mdio_read(netdev, adapter->mii.phy_id, MII_BMCR); + stat = pch_gbe_mdio_read(netdev, adapter->mii.phy_id, MII_BMSR); + stat = pch_gbe_mdio_read(netdev, adapter->mii.phy_id, MII_BMSR); + if (!((bmcr == 0xFFFF) || ((stat == 0) && (bmcr == 0)))) + break; + } + adapter->hw.phy.addr = adapter->mii.phy_id; + pr_debug("phy_addr = %d\n", adapter->mii.phy_id); + if (addr == 32) + return -EAGAIN; + /* Selected the phy and isolate the rest */ + for (addr = 0; addr < PCH_GBE_PHY_REGS_LEN; addr++) { + if (addr != adapter->mii.phy_id) { + pch_gbe_mdio_write(netdev, addr, MII_BMCR, + BMCR_ISOLATE); + } else { + bmcr = pch_gbe_mdio_read(netdev, addr, MII_BMCR); + pch_gbe_mdio_write(netdev, addr, MII_BMCR, + bmcr & ~BMCR_ISOLATE); + } + } + + /* MII setup */ + adapter->mii.phy_id_mask = 0x1F; + adapter->mii.reg_num_mask = 0x1F; + adapter->mii.dev = adapter->netdev; + adapter->mii.mdio_read = pch_gbe_mdio_read; + adapter->mii.mdio_write = pch_gbe_mdio_write; + adapter->mii.supports_gmii = mii_check_gmii_support(&adapter->mii); + return 0; +} + +/** + * pch_gbe_mdio_read - The read function for mii + * @netdev: Network interface device structure + * @addr: Phy ID + * @reg: Access location + * Returns + * 0: Successfully + * Negative value: Failed + */ +static int pch_gbe_mdio_read(struct net_device *netdev, int addr, int reg) +{ + struct pch_gbe_adapter *adapter = netdev_priv(netdev); + struct pch_gbe_hw *hw = &adapter->hw; + + return pch_gbe_mac_ctrl_miim(hw, addr, PCH_GBE_HAL_MIIM_READ, reg, + (u16) 0); +} + +/** + * pch_gbe_mdio_write - The write function for mii + * @netdev: Network interface device structure + * @addr: Phy ID (not used) + * @reg: Access location + * @data: Write data + */ +static void pch_gbe_mdio_write(struct net_device *netdev, + int addr, int reg, int data) +{ + struct pch_gbe_adapter *adapter = netdev_priv(netdev); + struct pch_gbe_hw *hw = &adapter->hw; + + pch_gbe_mac_ctrl_miim(hw, addr, PCH_GBE_HAL_MIIM_WRITE, reg, data); +} + +/** + * pch_gbe_reset_task - Reset processing at the time of transmission timeout + * @work: Pointer of board private structure + */ +static void pch_gbe_reset_task(struct work_struct *work) +{ + struct pch_gbe_adapter *adapter; + adapter = container_of(work, struct pch_gbe_adapter, reset_task); + + rtnl_lock(); + pch_gbe_reinit_locked(adapter); + rtnl_unlock(); +} + +/** + * pch_gbe_reinit_locked- Re-initialization + * @adapter: Board private structure + */ +void pch_gbe_reinit_locked(struct pch_gbe_adapter *adapter) +{ + pch_gbe_down(adapter); + pch_gbe_up(adapter); +} + +/** + * pch_gbe_reset - Reset GbE + * @adapter: Board private structure + */ +void pch_gbe_reset(struct pch_gbe_adapter *adapter) +{ + pch_gbe_mac_reset_hw(&adapter->hw); + /* Setup the receive address. */ + pch_gbe_mac_init_rx_addrs(&adapter->hw, PCH_GBE_MAR_ENTRIES); + if (pch_gbe_hal_init_hw(&adapter->hw)) + pr_err("Hardware Error\n"); +} + +/** + * pch_gbe_free_irq - Free an interrupt + * @adapter: Board private structure + */ +static void pch_gbe_free_irq(struct pch_gbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + + free_irq(adapter->pdev->irq, netdev); + if (adapter->have_msi) { + pci_disable_msi(adapter->pdev); + pr_debug("call pci_disable_msi\n"); + } +} + +/** + * pch_gbe_irq_disable - Mask off interrupt generation on the NIC + * @adapter: Board private structure + */ +static void pch_gbe_irq_disable(struct pch_gbe_adapter *adapter) +{ + struct pch_gbe_hw *hw = &adapter->hw; + + atomic_inc(&adapter->irq_sem); + iowrite32(0, &hw->reg->INT_EN); + ioread32(&hw->reg->INT_ST); + synchronize_irq(adapter->pdev->irq); + + pr_debug("INT_EN reg : 0x%08x\n", ioread32(&hw->reg->INT_EN)); +} + +/** + * pch_gbe_irq_enable - Enable default interrupt generation settings + * @adapter: Board private structure + */ +static void pch_gbe_irq_enable(struct pch_gbe_adapter *adapter) +{ + struct pch_gbe_hw *hw = &adapter->hw; + + if (likely(atomic_dec_and_test(&adapter->irq_sem))) + iowrite32(PCH_GBE_INT_ENABLE_MASK, &hw->reg->INT_EN); + ioread32(&hw->reg->INT_ST); + pr_debug("INT_EN reg : 0x%08x\n", ioread32(&hw->reg->INT_EN)); +} + + + +/** + * pch_gbe_setup_tctl - configure the Transmit control registers + * @adapter: Board private structure + */ +static void pch_gbe_setup_tctl(struct pch_gbe_adapter *adapter) +{ + struct pch_gbe_hw *hw = &adapter->hw; + u32 tx_mode, tcpip; + + tx_mode = PCH_GBE_TM_LONG_PKT | + PCH_GBE_TM_ST_AND_FD | + PCH_GBE_TM_SHORT_PKT | + PCH_GBE_TM_TH_TX_STRT_8 | + PCH_GBE_TM_TH_ALM_EMP_4 | PCH_GBE_TM_TH_ALM_FULL_8; + + iowrite32(tx_mode, &hw->reg->TX_MODE); + + tcpip = ioread32(&hw->reg->TCPIP_ACC); + tcpip |= PCH_GBE_TX_TCPIPACC_EN; + iowrite32(tcpip, &hw->reg->TCPIP_ACC); + return; +} + +/** + * pch_gbe_configure_tx - Configure Transmit Unit after Reset + * @adapter: Board private structure + */ +static void pch_gbe_configure_tx(struct pch_gbe_adapter *adapter) +{ + struct pch_gbe_hw *hw = &adapter->hw; + u32 tdba, tdlen, dctrl; + + pr_debug("dma addr = 0x%08llx size = 0x%08x\n", + (unsigned long long)adapter->tx_ring->dma, + adapter->tx_ring->size); + + /* Setup the HW Tx Head and Tail descriptor pointers */ + tdba = adapter->tx_ring->dma; + tdlen = adapter->tx_ring->size - 0x10; + iowrite32(tdba, &hw->reg->TX_DSC_BASE); + iowrite32(tdlen, &hw->reg->TX_DSC_SIZE); + iowrite32(tdba, &hw->reg->TX_DSC_SW_P); + + /* Enables Transmission DMA */ + dctrl = ioread32(&hw->reg->DMA_CTRL); + dctrl |= PCH_GBE_TX_DMA_EN; + iowrite32(dctrl, &hw->reg->DMA_CTRL); +} + +/** + * pch_gbe_setup_rctl - Configure the receive control registers + * @adapter: Board private structure + */ +static void pch_gbe_setup_rctl(struct pch_gbe_adapter *adapter) +{ + struct pch_gbe_hw *hw = &adapter->hw; + u32 rx_mode, tcpip; + + rx_mode = PCH_GBE_ADD_FIL_EN | PCH_GBE_MLT_FIL_EN | + PCH_GBE_RH_ALM_EMP_4 | PCH_GBE_RH_ALM_FULL_4 | PCH_GBE_RH_RD_TRG_8; + + iowrite32(rx_mode, &hw->reg->RX_MODE); + + tcpip = ioread32(&hw->reg->TCPIP_ACC); + + tcpip |= PCH_GBE_RX_TCPIPACC_OFF; + tcpip &= ~PCH_GBE_RX_TCPIPACC_EN; + iowrite32(tcpip, &hw->reg->TCPIP_ACC); + return; +} + +/** + * pch_gbe_configure_rx - Configure Receive Unit after Reset + * @adapter: Board private structure + */ +static void pch_gbe_configure_rx(struct pch_gbe_adapter *adapter) +{ + struct pch_gbe_hw *hw = &adapter->hw; + u32 rdba, rdlen, rctl, rxdma; + + pr_debug("dma adr = 0x%08llx size = 0x%08x\n", + (unsigned long long)adapter->rx_ring->dma, + adapter->rx_ring->size); + + pch_gbe_mac_force_mac_fc(hw); + + /* Disables Receive MAC */ + rctl = ioread32(&hw->reg->MAC_RX_EN); + iowrite32((rctl & ~PCH_GBE_MRE_MAC_RX_EN), &hw->reg->MAC_RX_EN); + + /* Disables Receive DMA */ + rxdma = ioread32(&hw->reg->DMA_CTRL); + rxdma &= ~PCH_GBE_RX_DMA_EN; + iowrite32(rxdma, &hw->reg->DMA_CTRL); + + pr_debug("MAC_RX_EN reg = 0x%08x DMA_CTRL reg = 0x%08x\n", + ioread32(&hw->reg->MAC_RX_EN), + ioread32(&hw->reg->DMA_CTRL)); + + /* Setup the HW Rx Head and Tail Descriptor Pointers and + * the Base and Length of the Rx Descriptor Ring */ + rdba = adapter->rx_ring->dma; + rdlen = adapter->rx_ring->size - 0x10; + iowrite32(rdba, &hw->reg->RX_DSC_BASE); + iowrite32(rdlen, &hw->reg->RX_DSC_SIZE); + iowrite32((rdba + rdlen), &hw->reg->RX_DSC_SW_P); +} + +/** + * pch_gbe_unmap_and_free_tx_resource - Unmap and free tx socket buffer + * @adapter: Board private structure + * @buffer_info: Buffer information structure + */ +static void pch_gbe_unmap_and_free_tx_resource( + struct pch_gbe_adapter *adapter, struct pch_gbe_buffer *buffer_info) +{ + if (buffer_info->mapped) { + dma_unmap_single(&adapter->pdev->dev, buffer_info->dma, + buffer_info->length, DMA_TO_DEVICE); + buffer_info->mapped = false; + } + if (buffer_info->skb) { + dev_kfree_skb_any(buffer_info->skb); + buffer_info->skb = NULL; + } +} + +/** + * pch_gbe_unmap_and_free_rx_resource - Unmap and free rx socket buffer + * @adapter: Board private structure + * @buffer_info: Buffer information structure + */ +static void pch_gbe_unmap_and_free_rx_resource( + struct pch_gbe_adapter *adapter, + struct pch_gbe_buffer *buffer_info) +{ + if (buffer_info->mapped) { + dma_unmap_single(&adapter->pdev->dev, buffer_info->dma, + buffer_info->length, DMA_FROM_DEVICE); + buffer_info->mapped = false; + } + if (buffer_info->skb) { + dev_kfree_skb_any(buffer_info->skb); + buffer_info->skb = NULL; + } +} + +/** + * pch_gbe_clean_tx_ring - Free Tx Buffers + * @adapter: Board private structure + * @tx_ring: Ring to be cleaned + */ +static void pch_gbe_clean_tx_ring(struct pch_gbe_adapter *adapter, + struct pch_gbe_tx_ring *tx_ring) +{ + struct pch_gbe_hw *hw = &adapter->hw; + struct pch_gbe_buffer *buffer_info; + unsigned long size; + unsigned int i; + + /* Free all the Tx ring sk_buffs */ + for (i = 0; i < tx_ring->count; i++) { + buffer_info = &tx_ring->buffer_info[i]; + pch_gbe_unmap_and_free_tx_resource(adapter, buffer_info); + } + pr_debug("call pch_gbe_unmap_and_free_tx_resource() %d count\n", i); + + size = (unsigned long)sizeof(struct pch_gbe_buffer) * tx_ring->count; + memset(tx_ring->buffer_info, 0, size); + + /* Zero out the descriptor ring */ + memset(tx_ring->desc, 0, tx_ring->size); + tx_ring->next_to_use = 0; + tx_ring->next_to_clean = 0; + iowrite32(tx_ring->dma, &hw->reg->TX_DSC_HW_P); + iowrite32((tx_ring->size - 0x10), &hw->reg->TX_DSC_SIZE); +} + +/** + * pch_gbe_clean_rx_ring - Free Rx Buffers + * @adapter: Board private structure + * @rx_ring: Ring to free buffers from + */ +static void +pch_gbe_clean_rx_ring(struct pch_gbe_adapter *adapter, + struct pch_gbe_rx_ring *rx_ring) +{ + struct pch_gbe_hw *hw = &adapter->hw; + struct pch_gbe_buffer *buffer_info; + unsigned long size; + unsigned int i; + + /* Free all the Rx ring sk_buffs */ + for (i = 0; i < rx_ring->count; i++) { + buffer_info = &rx_ring->buffer_info[i]; + pch_gbe_unmap_and_free_rx_resource(adapter, buffer_info); + } + pr_debug("call pch_gbe_unmap_and_free_rx_resource() %d count\n", i); + size = (unsigned long)sizeof(struct pch_gbe_buffer) * rx_ring->count; + memset(rx_ring->buffer_info, 0, size); + + /* Zero out the descriptor ring */ + memset(rx_ring->desc, 0, rx_ring->size); + rx_ring->next_to_clean = 0; + rx_ring->next_to_use = 0; + iowrite32(rx_ring->dma, &hw->reg->RX_DSC_HW_P); + iowrite32((rx_ring->size - 0x10), &hw->reg->RX_DSC_SIZE); +} + +static void pch_gbe_set_rgmii_ctrl(struct pch_gbe_adapter *adapter, u16 speed, + u16 duplex) +{ + struct pch_gbe_hw *hw = &adapter->hw; + unsigned long rgmii = 0; + + /* Set the RGMII control. */ +#ifdef PCH_GBE_MAC_IFOP_RGMII + switch (speed) { + case SPEED_10: + rgmii = (PCH_GBE_RGMII_RATE_2_5M | + PCH_GBE_MAC_RGMII_CTRL_SETTING); + break; + case SPEED_100: + rgmii = (PCH_GBE_RGMII_RATE_25M | + PCH_GBE_MAC_RGMII_CTRL_SETTING); + break; + case SPEED_1000: + rgmii = (PCH_GBE_RGMII_RATE_125M | + PCH_GBE_MAC_RGMII_CTRL_SETTING); + break; + } + iowrite32(rgmii, &hw->reg->RGMII_CTRL); +#else /* GMII */ + rgmii = 0; + iowrite32(rgmii, &hw->reg->RGMII_CTRL); +#endif +} +static void pch_gbe_set_mode(struct pch_gbe_adapter *adapter, u16 speed, + u16 duplex) +{ + struct net_device *netdev = adapter->netdev; + struct pch_gbe_hw *hw = &adapter->hw; + unsigned long mode = 0; + + /* Set the communication mode */ + switch (speed) { + case SPEED_10: + mode = PCH_GBE_MODE_MII_ETHER; + netdev->tx_queue_len = 10; + break; + case SPEED_100: + mode = PCH_GBE_MODE_MII_ETHER; + netdev->tx_queue_len = 100; + break; + case SPEED_1000: + mode = PCH_GBE_MODE_GMII_ETHER; + break; + } + if (duplex == DUPLEX_FULL) + mode |= PCH_GBE_MODE_FULL_DUPLEX; + else + mode |= PCH_GBE_MODE_HALF_DUPLEX; + iowrite32(mode, &hw->reg->MODE); +} + +/** + * pch_gbe_watchdog - Watchdog process + * @data: Board private structure + */ +static void pch_gbe_watchdog(unsigned long data) +{ + struct pch_gbe_adapter *adapter = (struct pch_gbe_adapter *)data; + struct net_device *netdev = adapter->netdev; + struct pch_gbe_hw *hw = &adapter->hw; + + pr_debug("right now = %ld\n", jiffies); + + pch_gbe_update_stats(adapter); + if ((mii_link_ok(&adapter->mii)) && (!netif_carrier_ok(netdev))) { + struct ethtool_cmd cmd = { .cmd = ETHTOOL_GSET }; + netdev->tx_queue_len = adapter->tx_queue_len; + /* mii library handles link maintenance tasks */ + if (mii_ethtool_gset(&adapter->mii, &cmd)) { + pr_err("ethtool get setting Error\n"); + mod_timer(&adapter->watchdog_timer, + round_jiffies(jiffies + + PCH_GBE_WATCHDOG_PERIOD)); + return; + } + hw->mac.link_speed = ethtool_cmd_speed(&cmd); + hw->mac.link_duplex = cmd.duplex; + /* Set the RGMII control. */ + pch_gbe_set_rgmii_ctrl(adapter, hw->mac.link_speed, + hw->mac.link_duplex); + /* Set the communication mode */ + pch_gbe_set_mode(adapter, hw->mac.link_speed, + hw->mac.link_duplex); + netdev_dbg(netdev, + "Link is Up %d Mbps %s-Duplex\n", + hw->mac.link_speed, + cmd.duplex == DUPLEX_FULL ? "Full" : "Half"); + netif_carrier_on(netdev); + netif_wake_queue(netdev); + } else if ((!mii_link_ok(&adapter->mii)) && + (netif_carrier_ok(netdev))) { + netdev_dbg(netdev, "NIC Link is Down\n"); + hw->mac.link_speed = SPEED_10; + hw->mac.link_duplex = DUPLEX_HALF; + netif_carrier_off(netdev); + netif_stop_queue(netdev); + } + mod_timer(&adapter->watchdog_timer, + round_jiffies(jiffies + PCH_GBE_WATCHDOG_PERIOD)); +} + +/** + * pch_gbe_tx_queue - Carry out queuing of the transmission data + * @adapter: Board private structure + * @tx_ring: Tx descriptor ring structure + * @skb: Sockt buffer structure + */ +static void pch_gbe_tx_queue(struct pch_gbe_adapter *adapter, + struct pch_gbe_tx_ring *tx_ring, + struct sk_buff *skb) +{ + struct pch_gbe_hw *hw = &adapter->hw; + struct pch_gbe_tx_desc *tx_desc; + struct pch_gbe_buffer *buffer_info; + struct sk_buff *tmp_skb; + unsigned int frame_ctrl; + unsigned int ring_num; + unsigned long flags; + + /*-- Set frame control --*/ + frame_ctrl = 0; + if (unlikely(skb->len < PCH_GBE_SHORT_PKT)) + frame_ctrl |= PCH_GBE_TXD_CTRL_APAD; + if (skb->ip_summed == CHECKSUM_NONE) + frame_ctrl |= PCH_GBE_TXD_CTRL_TCPIP_ACC_OFF; + + /* Performs checksum processing */ + /* + * It is because the hardware accelerator does not support a checksum, + * when the received data size is less than 64 bytes. + */ + if (skb->len < PCH_GBE_SHORT_PKT && skb->ip_summed != CHECKSUM_NONE) { + frame_ctrl |= PCH_GBE_TXD_CTRL_APAD | + PCH_GBE_TXD_CTRL_TCPIP_ACC_OFF; + if (skb->protocol == htons(ETH_P_IP)) { + struct iphdr *iph = ip_hdr(skb); + unsigned int offset; + iph->check = 0; + iph->check = ip_fast_csum((u8 *) iph, iph->ihl); + offset = skb_transport_offset(skb); + if (iph->protocol == IPPROTO_TCP) { + skb->csum = 0; + tcp_hdr(skb)->check = 0; + skb->csum = skb_checksum(skb, offset, + skb->len - offset, 0); + tcp_hdr(skb)->check = + csum_tcpudp_magic(iph->saddr, + iph->daddr, + skb->len - offset, + IPPROTO_TCP, + skb->csum); + } else if (iph->protocol == IPPROTO_UDP) { + skb->csum = 0; + udp_hdr(skb)->check = 0; + skb->csum = + skb_checksum(skb, offset, + skb->len - offset, 0); + udp_hdr(skb)->check = + csum_tcpudp_magic(iph->saddr, + iph->daddr, + skb->len - offset, + IPPROTO_UDP, + skb->csum); + } + } + } + spin_lock_irqsave(&tx_ring->tx_lock, flags); + ring_num = tx_ring->next_to_use; + if (unlikely((ring_num + 1) == tx_ring->count)) + tx_ring->next_to_use = 0; + else + tx_ring->next_to_use = ring_num + 1; + + spin_unlock_irqrestore(&tx_ring->tx_lock, flags); + buffer_info = &tx_ring->buffer_info[ring_num]; + tmp_skb = buffer_info->skb; + + /* [Header:14][payload] ---> [Header:14][paddong:2][payload] */ + memcpy(tmp_skb->data, skb->data, ETH_HLEN); + tmp_skb->data[ETH_HLEN] = 0x00; + tmp_skb->data[ETH_HLEN + 1] = 0x00; + tmp_skb->len = skb->len; + memcpy(&tmp_skb->data[ETH_HLEN + 2], &skb->data[ETH_HLEN], + (skb->len - ETH_HLEN)); + /*-- Set Buffer information --*/ + buffer_info->length = tmp_skb->len; + buffer_info->dma = dma_map_single(&adapter->pdev->dev, tmp_skb->data, + buffer_info->length, + DMA_TO_DEVICE); + if (dma_mapping_error(&adapter->pdev->dev, buffer_info->dma)) { + pr_err("TX DMA map failed\n"); + buffer_info->dma = 0; + buffer_info->time_stamp = 0; + tx_ring->next_to_use = ring_num; + return; + } + buffer_info->mapped = true; + buffer_info->time_stamp = jiffies; + + /*-- Set Tx descriptor --*/ + tx_desc = PCH_GBE_TX_DESC(*tx_ring, ring_num); + tx_desc->buffer_addr = (buffer_info->dma); + tx_desc->length = (tmp_skb->len); + tx_desc->tx_words_eob = ((tmp_skb->len + 3)); + tx_desc->tx_frame_ctrl = (frame_ctrl); + tx_desc->gbec_status = (DSC_INIT16); + + if (unlikely(++ring_num == tx_ring->count)) + ring_num = 0; + + /* Update software pointer of TX descriptor */ + iowrite32(tx_ring->dma + + (int)sizeof(struct pch_gbe_tx_desc) * ring_num, + &hw->reg->TX_DSC_SW_P); + dev_kfree_skb_any(skb); +} + +/** + * pch_gbe_update_stats - Update the board statistics counters + * @adapter: Board private structure + */ +void pch_gbe_update_stats(struct pch_gbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + struct pch_gbe_hw_stats *stats = &adapter->stats; + unsigned long flags; + + /* + * Prevent stats update while adapter is being reset, or if the pci + * connection is down. + */ + if ((pdev->error_state) && (pdev->error_state != pci_channel_io_normal)) + return; + + spin_lock_irqsave(&adapter->stats_lock, flags); + + /* Update device status "adapter->stats" */ + stats->rx_errors = stats->rx_crc_errors + stats->rx_frame_errors; + stats->tx_errors = stats->tx_length_errors + + stats->tx_aborted_errors + + stats->tx_carrier_errors + stats->tx_timeout_count; + + /* Update network device status "adapter->net_stats" */ + netdev->stats.rx_packets = stats->rx_packets; + netdev->stats.rx_bytes = stats->rx_bytes; + netdev->stats.rx_dropped = stats->rx_dropped; + netdev->stats.tx_packets = stats->tx_packets; + netdev->stats.tx_bytes = stats->tx_bytes; + netdev->stats.tx_dropped = stats->tx_dropped; + /* Fill out the OS statistics structure */ + netdev->stats.multicast = stats->multicast; + netdev->stats.collisions = stats->collisions; + /* Rx Errors */ + netdev->stats.rx_errors = stats->rx_errors; + netdev->stats.rx_crc_errors = stats->rx_crc_errors; + netdev->stats.rx_frame_errors = stats->rx_frame_errors; + /* Tx Errors */ + netdev->stats.tx_errors = stats->tx_errors; + netdev->stats.tx_aborted_errors = stats->tx_aborted_errors; + netdev->stats.tx_carrier_errors = stats->tx_carrier_errors; + + spin_unlock_irqrestore(&adapter->stats_lock, flags); +} + +static void pch_gbe_stop_receive(struct pch_gbe_adapter *adapter) +{ + struct pch_gbe_hw *hw = &adapter->hw; + u32 rxdma; + u16 value; + int ret; + + /* Disable Receive DMA */ + rxdma = ioread32(&hw->reg->DMA_CTRL); + rxdma &= ~PCH_GBE_RX_DMA_EN; + iowrite32(rxdma, &hw->reg->DMA_CTRL); + /* Wait Rx DMA BUS is IDLE */ + ret = pch_gbe_wait_clr_bit_irq(&hw->reg->RX_DMA_ST, PCH_GBE_IDLE_CHECK); + if (ret) { + /* Disable Bus master */ + pci_read_config_word(adapter->pdev, PCI_COMMAND, &value); + value &= ~PCI_COMMAND_MASTER; + pci_write_config_word(adapter->pdev, PCI_COMMAND, value); + /* Stop Receive */ + pch_gbe_mac_reset_rx(hw); + /* Enable Bus master */ + value |= PCI_COMMAND_MASTER; + pci_write_config_word(adapter->pdev, PCI_COMMAND, value); + } else { + /* Stop Receive */ + pch_gbe_mac_reset_rx(hw); + } +} + +static void pch_gbe_start_receive(struct pch_gbe_hw *hw) +{ + u32 rxdma; + + /* Enables Receive DMA */ + rxdma = ioread32(&hw->reg->DMA_CTRL); + rxdma |= PCH_GBE_RX_DMA_EN; + iowrite32(rxdma, &hw->reg->DMA_CTRL); + /* Enables Receive */ + iowrite32(PCH_GBE_MRE_MAC_RX_EN, &hw->reg->MAC_RX_EN); + return; +} + +/** + * pch_gbe_intr - Interrupt Handler + * @irq: Interrupt number + * @data: Pointer to a network interface device structure + * Returns + * - IRQ_HANDLED: Our interrupt + * - IRQ_NONE: Not our interrupt + */ +static irqreturn_t pch_gbe_intr(int irq, void *data) +{ + struct net_device *netdev = data; + struct pch_gbe_adapter *adapter = netdev_priv(netdev); + struct pch_gbe_hw *hw = &adapter->hw; + u32 int_st; + u32 int_en; + + /* Check request status */ + int_st = ioread32(&hw->reg->INT_ST); + int_st = int_st & ioread32(&hw->reg->INT_EN); + /* When request status is no interruption factor */ + if (unlikely(!int_st)) + return IRQ_NONE; /* Not our interrupt. End processing. */ + pr_debug("%s occur int_st = 0x%08x\n", __func__, int_st); + if (int_st & PCH_GBE_INT_RX_FRAME_ERR) + adapter->stats.intr_rx_frame_err_count++; + if (int_st & PCH_GBE_INT_RX_FIFO_ERR) + if (!adapter->rx_stop_flag) { + adapter->stats.intr_rx_fifo_err_count++; + pr_debug("Rx fifo over run\n"); + adapter->rx_stop_flag = true; + int_en = ioread32(&hw->reg->INT_EN); + iowrite32((int_en & ~PCH_GBE_INT_RX_FIFO_ERR), + &hw->reg->INT_EN); + pch_gbe_stop_receive(adapter); ++ int_st |= ioread32(&hw->reg->INT_ST); ++ int_st = int_st & ioread32(&hw->reg->INT_EN); + } + if (int_st & PCH_GBE_INT_RX_DMA_ERR) + adapter->stats.intr_rx_dma_err_count++; + if (int_st & PCH_GBE_INT_TX_FIFO_ERR) + adapter->stats.intr_tx_fifo_err_count++; + if (int_st & PCH_GBE_INT_TX_DMA_ERR) + adapter->stats.intr_tx_dma_err_count++; + if (int_st & PCH_GBE_INT_TCPIP_ERR) + adapter->stats.intr_tcpip_err_count++; + /* When Rx descriptor is empty */ + if ((int_st & PCH_GBE_INT_RX_DSC_EMP)) { + adapter->stats.intr_rx_dsc_empty_count++; + pr_debug("Rx descriptor is empty\n"); + int_en = ioread32(&hw->reg->INT_EN); + iowrite32((int_en & ~PCH_GBE_INT_RX_DSC_EMP), &hw->reg->INT_EN); + if (hw->mac.tx_fc_enable) { + /* Set Pause packet */ + pch_gbe_mac_set_pause_packet(hw); + } - if ((int_en & (PCH_GBE_INT_RX_DMA_CMPLT | PCH_GBE_INT_TX_CMPLT)) - == 0) { - return IRQ_HANDLED; - } + } + + /* When request status is Receive interruption */ - if ((int_st & (PCH_GBE_INT_RX_DMA_CMPLT | PCH_GBE_INT_TX_CMPLT))) { ++ if ((int_st & (PCH_GBE_INT_RX_DMA_CMPLT | PCH_GBE_INT_TX_CMPLT)) || ++ (adapter->rx_stop_flag == true)) { + if (likely(napi_schedule_prep(&adapter->napi))) { + /* Enable only Rx Descriptor empty */ + atomic_inc(&adapter->irq_sem); + int_en = ioread32(&hw->reg->INT_EN); + int_en &= + ~(PCH_GBE_INT_RX_DMA_CMPLT | PCH_GBE_INT_TX_CMPLT); + iowrite32(int_en, &hw->reg->INT_EN); + /* Start polling for NAPI */ + __napi_schedule(&adapter->napi); + } + } + pr_debug("return = 0x%08x INT_EN reg = 0x%08x\n", + IRQ_HANDLED, ioread32(&hw->reg->INT_EN)); + return IRQ_HANDLED; +} + +/** + * pch_gbe_alloc_rx_buffers - Replace used receive buffers; legacy & extended + * @adapter: Board private structure + * @rx_ring: Rx descriptor ring + * @cleaned_count: Cleaned count + */ +static void +pch_gbe_alloc_rx_buffers(struct pch_gbe_adapter *adapter, + struct pch_gbe_rx_ring *rx_ring, int cleaned_count) +{ + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + struct pch_gbe_hw *hw = &adapter->hw; + struct pch_gbe_rx_desc *rx_desc; + struct pch_gbe_buffer *buffer_info; + struct sk_buff *skb; + unsigned int i; + unsigned int bufsz; + + bufsz = adapter->rx_buffer_len + NET_IP_ALIGN; + i = rx_ring->next_to_use; + + while ((cleaned_count--)) { + buffer_info = &rx_ring->buffer_info[i]; + skb = netdev_alloc_skb(netdev, bufsz); + if (unlikely(!skb)) { + /* Better luck next round */ + adapter->stats.rx_alloc_buff_failed++; + break; + } + /* align */ + skb_reserve(skb, NET_IP_ALIGN); + buffer_info->skb = skb; + + buffer_info->dma = dma_map_single(&pdev->dev, + buffer_info->rx_buffer, + buffer_info->length, + DMA_FROM_DEVICE); + if (dma_mapping_error(&adapter->pdev->dev, buffer_info->dma)) { + dev_kfree_skb(skb); + buffer_info->skb = NULL; + buffer_info->dma = 0; + adapter->stats.rx_alloc_buff_failed++; + break; /* while !buffer_info->skb */ + } + buffer_info->mapped = true; + rx_desc = PCH_GBE_RX_DESC(*rx_ring, i); + rx_desc->buffer_addr = (buffer_info->dma); + rx_desc->gbec_status = DSC_INIT16; + + pr_debug("i = %d buffer_info->dma = 0x08%llx buffer_info->length = 0x%x\n", + i, (unsigned long long)buffer_info->dma, + buffer_info->length); + + if (unlikely(++i == rx_ring->count)) + i = 0; + } + if (likely(rx_ring->next_to_use != i)) { + rx_ring->next_to_use = i; + if (unlikely(i-- == 0)) + i = (rx_ring->count - 1); + iowrite32(rx_ring->dma + + (int)sizeof(struct pch_gbe_rx_desc) * i, + &hw->reg->RX_DSC_SW_P); + } + return; +} + +static int +pch_gbe_alloc_rx_buffers_pool(struct pch_gbe_adapter *adapter, + struct pch_gbe_rx_ring *rx_ring, int cleaned_count) +{ + struct pci_dev *pdev = adapter->pdev; + struct pch_gbe_buffer *buffer_info; + unsigned int i; + unsigned int bufsz; + unsigned int size; + + bufsz = adapter->rx_buffer_len; + + size = rx_ring->count * bufsz + PCH_GBE_RESERVE_MEMORY; + rx_ring->rx_buff_pool = dma_alloc_coherent(&pdev->dev, size, + &rx_ring->rx_buff_pool_logic, + GFP_KERNEL); + if (!rx_ring->rx_buff_pool) { + pr_err("Unable to allocate memory for the receive poll buffer\n"); + return -ENOMEM; + } + memset(rx_ring->rx_buff_pool, 0, size); + rx_ring->rx_buff_pool_size = size; + for (i = 0; i < rx_ring->count; i++) { + buffer_info = &rx_ring->buffer_info[i]; + buffer_info->rx_buffer = rx_ring->rx_buff_pool + bufsz * i; + buffer_info->length = bufsz; + } + return 0; +} + +/** + * pch_gbe_alloc_tx_buffers - Allocate transmit buffers + * @adapter: Board private structure + * @tx_ring: Tx descriptor ring + */ +static void pch_gbe_alloc_tx_buffers(struct pch_gbe_adapter *adapter, + struct pch_gbe_tx_ring *tx_ring) +{ + struct pch_gbe_buffer *buffer_info; + struct sk_buff *skb; + unsigned int i; + unsigned int bufsz; + struct pch_gbe_tx_desc *tx_desc; + + bufsz = + adapter->hw.mac.max_frame_size + PCH_GBE_DMA_ALIGN + NET_IP_ALIGN; + + for (i = 0; i < tx_ring->count; i++) { + buffer_info = &tx_ring->buffer_info[i]; + skb = netdev_alloc_skb(adapter->netdev, bufsz); + skb_reserve(skb, PCH_GBE_DMA_ALIGN); + buffer_info->skb = skb; + tx_desc = PCH_GBE_TX_DESC(*tx_ring, i); + tx_desc->gbec_status = (DSC_INIT16); + } + return; +} + +/** + * pch_gbe_clean_tx - Reclaim resources after transmit completes + * @adapter: Board private structure + * @tx_ring: Tx descriptor ring + * Returns + * true: Cleaned the descriptor + * false: Not cleaned the descriptor + */ +static bool +pch_gbe_clean_tx(struct pch_gbe_adapter *adapter, + struct pch_gbe_tx_ring *tx_ring) +{ + struct pch_gbe_tx_desc *tx_desc; + struct pch_gbe_buffer *buffer_info; + struct sk_buff *skb; + unsigned int i; + unsigned int cleaned_count = 0; - bool cleaned = false; ++ bool cleaned = true; + + pr_debug("next_to_clean : %d\n", tx_ring->next_to_clean); + + i = tx_ring->next_to_clean; + tx_desc = PCH_GBE_TX_DESC(*tx_ring, i); + pr_debug("gbec_status:0x%04x dma_status:0x%04x\n", + tx_desc->gbec_status, tx_desc->dma_status); + + while ((tx_desc->gbec_status & DSC_INIT16) == 0x0000) { + pr_debug("gbec_status:0x%04x\n", tx_desc->gbec_status); - cleaned = true; + buffer_info = &tx_ring->buffer_info[i]; + skb = buffer_info->skb; + + if ((tx_desc->gbec_status & PCH_GBE_TXD_GMAC_STAT_ABT)) { + adapter->stats.tx_aborted_errors++; + pr_err("Transfer Abort Error\n"); + } else if ((tx_desc->gbec_status & PCH_GBE_TXD_GMAC_STAT_CRSER) + ) { + adapter->stats.tx_carrier_errors++; + pr_err("Transfer Carrier Sense Error\n"); + } else if ((tx_desc->gbec_status & PCH_GBE_TXD_GMAC_STAT_EXCOL) + ) { + adapter->stats.tx_aborted_errors++; + pr_err("Transfer Collision Abort Error\n"); + } else if ((tx_desc->gbec_status & + (PCH_GBE_TXD_GMAC_STAT_SNGCOL | + PCH_GBE_TXD_GMAC_STAT_MLTCOL))) { + adapter->stats.collisions++; + adapter->stats.tx_packets++; + adapter->stats.tx_bytes += skb->len; + pr_debug("Transfer Collision\n"); + } else if ((tx_desc->gbec_status & PCH_GBE_TXD_GMAC_STAT_CMPLT) + ) { + adapter->stats.tx_packets++; + adapter->stats.tx_bytes += skb->len; + } + if (buffer_info->mapped) { + pr_debug("unmap buffer_info->dma : %d\n", i); + dma_unmap_single(&adapter->pdev->dev, buffer_info->dma, + buffer_info->length, DMA_TO_DEVICE); + buffer_info->mapped = false; + } + if (buffer_info->skb) { + pr_debug("trim buffer_info->skb : %d\n", i); + skb_trim(buffer_info->skb, 0); + } + tx_desc->gbec_status = DSC_INIT16; + if (unlikely(++i == tx_ring->count)) + i = 0; + tx_desc = PCH_GBE_TX_DESC(*tx_ring, i); + + /* weight of a sort for tx, to avoid endless transmit cleanup */ - if (cleaned_count++ == PCH_GBE_TX_WEIGHT) ++ if (cleaned_count++ == PCH_GBE_TX_WEIGHT) { ++ cleaned = false; + break; ++ } + } + pr_debug("called pch_gbe_unmap_and_free_tx_resource() %d count\n", + cleaned_count); + /* Recover from running out of Tx resources in xmit_frame */ + if (unlikely(cleaned && (netif_queue_stopped(adapter->netdev)))) { + netif_wake_queue(adapter->netdev); + adapter->stats.tx_restart_count++; + pr_debug("Tx wake queue\n"); + } + spin_lock(&adapter->tx_queue_lock); + tx_ring->next_to_clean = i; + spin_unlock(&adapter->tx_queue_lock); + pr_debug("next_to_clean : %d\n", tx_ring->next_to_clean); + return cleaned; +} + +/** + * pch_gbe_clean_rx - Send received data up the network stack; legacy + * @adapter: Board private structure + * @rx_ring: Rx descriptor ring + * @work_done: Completed count + * @work_to_do: Request count + * Returns + * true: Cleaned the descriptor + * false: Not cleaned the descriptor + */ +static bool +pch_gbe_clean_rx(struct pch_gbe_adapter *adapter, + struct pch_gbe_rx_ring *rx_ring, + int *work_done, int work_to_do) +{ + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + struct pch_gbe_buffer *buffer_info; + struct pch_gbe_rx_desc *rx_desc; + u32 length; + unsigned int i; + unsigned int cleaned_count = 0; + bool cleaned = false; + struct sk_buff *skb; + u8 dma_status; + u16 gbec_status; + u32 tcp_ip_status; + + i = rx_ring->next_to_clean; + + while (*work_done < work_to_do) { + /* Check Rx descriptor status */ + rx_desc = PCH_GBE_RX_DESC(*rx_ring, i); + if (rx_desc->gbec_status == DSC_INIT16) + break; + cleaned = true; + cleaned_count++; + + dma_status = rx_desc->dma_status; + gbec_status = rx_desc->gbec_status; + tcp_ip_status = rx_desc->tcp_ip_status; + rx_desc->gbec_status = DSC_INIT16; + buffer_info = &rx_ring->buffer_info[i]; + skb = buffer_info->skb; + buffer_info->skb = NULL; + + /* unmap dma */ + dma_unmap_single(&pdev->dev, buffer_info->dma, + buffer_info->length, DMA_FROM_DEVICE); + buffer_info->mapped = false; + + pr_debug("RxDecNo = 0x%04x Status[DMA:0x%02x GBE:0x%04x " + "TCP:0x%08x] BufInf = 0x%p\n", + i, dma_status, gbec_status, tcp_ip_status, + buffer_info); + /* Error check */ + if (unlikely(gbec_status & PCH_GBE_RXD_GMAC_STAT_NOTOCTAL)) { + adapter->stats.rx_frame_errors++; + pr_err("Receive Not Octal Error\n"); + } else if (unlikely(gbec_status & + PCH_GBE_RXD_GMAC_STAT_NBLERR)) { + adapter->stats.rx_frame_errors++; + pr_err("Receive Nibble Error\n"); + } else if (unlikely(gbec_status & + PCH_GBE_RXD_GMAC_STAT_CRCERR)) { + adapter->stats.rx_crc_errors++; + pr_err("Receive CRC Error\n"); + } else { + /* get receive length */ + /* length convert[-3], length includes FCS length */ + length = (rx_desc->rx_words_eob) - 3 - ETH_FCS_LEN; + if (rx_desc->rx_words_eob & 0x02) + length = length - 4; + /* + * buffer_info->rx_buffer: [Header:14][payload] + * skb->data: [Reserve:2][Header:14][payload] + */ + memcpy(skb->data, buffer_info->rx_buffer, length); + + /* update status of driver */ + adapter->stats.rx_bytes += length; + adapter->stats.rx_packets++; + if ((gbec_status & PCH_GBE_RXD_GMAC_STAT_MARMLT)) + adapter->stats.multicast++; + /* Write meta date of skb */ + skb_put(skb, length); + skb->protocol = eth_type_trans(skb, netdev); + if (tcp_ip_status & PCH_GBE_RXD_ACC_STAT_TCPIPOK) + skb->ip_summed = CHECKSUM_NONE; + else + skb->ip_summed = CHECKSUM_UNNECESSARY; + + napi_gro_receive(&adapter->napi, skb); + (*work_done)++; + pr_debug("Receive skb->ip_summed: %d length: %d\n", + skb->ip_summed, length); + } + /* return some buffers to hardware, one at a time is too slow */ + if (unlikely(cleaned_count >= PCH_GBE_RX_BUFFER_WRITE)) { + pch_gbe_alloc_rx_buffers(adapter, rx_ring, + cleaned_count); + cleaned_count = 0; + } + if (++i == rx_ring->count) + i = 0; + } + rx_ring->next_to_clean = i; + if (cleaned_count) + pch_gbe_alloc_rx_buffers(adapter, rx_ring, cleaned_count); + return cleaned; +} + +/** + * pch_gbe_setup_tx_resources - Allocate Tx resources (Descriptors) + * @adapter: Board private structure + * @tx_ring: Tx descriptor ring (for a specific queue) to setup + * Returns + * 0: Successfully + * Negative value: Failed + */ +int pch_gbe_setup_tx_resources(struct pch_gbe_adapter *adapter, + struct pch_gbe_tx_ring *tx_ring) +{ + struct pci_dev *pdev = adapter->pdev; + struct pch_gbe_tx_desc *tx_desc; + int size; + int desNo; + + size = (int)sizeof(struct pch_gbe_buffer) * tx_ring->count; + tx_ring->buffer_info = vzalloc(size); + if (!tx_ring->buffer_info) { + pr_err("Unable to allocate memory for the buffer information\n"); + return -ENOMEM; + } + + tx_ring->size = tx_ring->count * (int)sizeof(struct pch_gbe_tx_desc); + + tx_ring->desc = dma_alloc_coherent(&pdev->dev, tx_ring->size, + &tx_ring->dma, GFP_KERNEL); + if (!tx_ring->desc) { + vfree(tx_ring->buffer_info); + pr_err("Unable to allocate memory for the transmit descriptor ring\n"); + return -ENOMEM; + } + memset(tx_ring->desc, 0, tx_ring->size); + + tx_ring->next_to_use = 0; + tx_ring->next_to_clean = 0; + spin_lock_init(&tx_ring->tx_lock); + + for (desNo = 0; desNo < tx_ring->count; desNo++) { + tx_desc = PCH_GBE_TX_DESC(*tx_ring, desNo); + tx_desc->gbec_status = DSC_INIT16; + } + pr_debug("tx_ring->desc = 0x%p tx_ring->dma = 0x%08llx\n" + "next_to_clean = 0x%08x next_to_use = 0x%08x\n", + tx_ring->desc, (unsigned long long)tx_ring->dma, + tx_ring->next_to_clean, tx_ring->next_to_use); + return 0; +} + +/** + * pch_gbe_setup_rx_resources - Allocate Rx resources (Descriptors) + * @adapter: Board private structure + * @rx_ring: Rx descriptor ring (for a specific queue) to setup + * Returns + * 0: Successfully + * Negative value: Failed + */ +int pch_gbe_setup_rx_resources(struct pch_gbe_adapter *adapter, + struct pch_gbe_rx_ring *rx_ring) +{ + struct pci_dev *pdev = adapter->pdev; + struct pch_gbe_rx_desc *rx_desc; + int size; + int desNo; + + size = (int)sizeof(struct pch_gbe_buffer) * rx_ring->count; + rx_ring->buffer_info = vzalloc(size); + if (!rx_ring->buffer_info) { + pr_err("Unable to allocate memory for the receive descriptor ring\n"); + return -ENOMEM; + } + rx_ring->size = rx_ring->count * (int)sizeof(struct pch_gbe_rx_desc); + rx_ring->desc = dma_alloc_coherent(&pdev->dev, rx_ring->size, + &rx_ring->dma, GFP_KERNEL); + + if (!rx_ring->desc) { + pr_err("Unable to allocate memory for the receive descriptor ring\n"); + vfree(rx_ring->buffer_info); + return -ENOMEM; + } + memset(rx_ring->desc, 0, rx_ring->size); + rx_ring->next_to_clean = 0; + rx_ring->next_to_use = 0; + for (desNo = 0; desNo < rx_ring->count; desNo++) { + rx_desc = PCH_GBE_RX_DESC(*rx_ring, desNo); + rx_desc->gbec_status = DSC_INIT16; + } + pr_debug("rx_ring->desc = 0x%p rx_ring->dma = 0x%08llx " + "next_to_clean = 0x%08x next_to_use = 0x%08x\n", + rx_ring->desc, (unsigned long long)rx_ring->dma, + rx_ring->next_to_clean, rx_ring->next_to_use); + return 0; +} + +/** + * pch_gbe_free_tx_resources - Free Tx Resources + * @adapter: Board private structure + * @tx_ring: Tx descriptor ring for a specific queue + */ +void pch_gbe_free_tx_resources(struct pch_gbe_adapter *adapter, + struct pch_gbe_tx_ring *tx_ring) +{ + struct pci_dev *pdev = adapter->pdev; + + pch_gbe_clean_tx_ring(adapter, tx_ring); + vfree(tx_ring->buffer_info); + tx_ring->buffer_info = NULL; + pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma); + tx_ring->desc = NULL; +} + +/** + * pch_gbe_free_rx_resources - Free Rx Resources + * @adapter: Board private structure + * @rx_ring: Ring to clean the resources from + */ +void pch_gbe_free_rx_resources(struct pch_gbe_adapter *adapter, + struct pch_gbe_rx_ring *rx_ring) +{ + struct pci_dev *pdev = adapter->pdev; + + pch_gbe_clean_rx_ring(adapter, rx_ring); + vfree(rx_ring->buffer_info); + rx_ring->buffer_info = NULL; + pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma); + rx_ring->desc = NULL; +} + +/** + * pch_gbe_request_irq - Allocate an interrupt line + * @adapter: Board private structure + * Returns + * 0: Successfully + * Negative value: Failed + */ +static int pch_gbe_request_irq(struct pch_gbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + int err; + int flags; + + flags = IRQF_SHARED; + adapter->have_msi = false; + err = pci_enable_msi(adapter->pdev); + pr_debug("call pci_enable_msi\n"); + if (err) { + pr_debug("call pci_enable_msi - Error: %d\n", err); + } else { + flags = 0; + adapter->have_msi = true; + } + err = request_irq(adapter->pdev->irq, &pch_gbe_intr, + flags, netdev->name, netdev); + if (err) + pr_err("Unable to allocate interrupt Error: %d\n", err); + pr_debug("adapter->have_msi : %d flags : 0x%04x return : 0x%04x\n", + adapter->have_msi, flags, err); + return err; +} + + +static void pch_gbe_set_multi(struct net_device *netdev); +/** + * pch_gbe_up - Up GbE network device + * @adapter: Board private structure + * Returns + * 0: Successfully + * Negative value: Failed + */ +int pch_gbe_up(struct pch_gbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct pch_gbe_tx_ring *tx_ring = adapter->tx_ring; + struct pch_gbe_rx_ring *rx_ring = adapter->rx_ring; + int err; + + /* hardware has been reset, we need to reload some things */ + pch_gbe_set_multi(netdev); + + pch_gbe_setup_tctl(adapter); + pch_gbe_configure_tx(adapter); + pch_gbe_setup_rctl(adapter); + pch_gbe_configure_rx(adapter); + + err = pch_gbe_request_irq(adapter); + if (err) { + pr_err("Error: can't bring device up\n"); + return err; + } + err = pch_gbe_alloc_rx_buffers_pool(adapter, rx_ring, rx_ring->count); + if (err) { + pr_err("Error: can't bring device up\n"); + return err; + } + pch_gbe_alloc_tx_buffers(adapter, tx_ring); + pch_gbe_alloc_rx_buffers(adapter, rx_ring, rx_ring->count); + adapter->tx_queue_len = netdev->tx_queue_len; + pch_gbe_start_receive(&adapter->hw); + + mod_timer(&adapter->watchdog_timer, jiffies); + + napi_enable(&adapter->napi); + pch_gbe_irq_enable(adapter); + netif_start_queue(adapter->netdev); + + return 0; +} + +/** + * pch_gbe_down - Down GbE network device + * @adapter: Board private structure + */ +void pch_gbe_down(struct pch_gbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct pch_gbe_rx_ring *rx_ring = adapter->rx_ring; + + /* signal that we're down so the interrupt handler does not + * reschedule our watchdog timer */ + napi_disable(&adapter->napi); + atomic_set(&adapter->irq_sem, 0); + + pch_gbe_irq_disable(adapter); + pch_gbe_free_irq(adapter); + + del_timer_sync(&adapter->watchdog_timer); + + netdev->tx_queue_len = adapter->tx_queue_len; + netif_carrier_off(netdev); + netif_stop_queue(netdev); + + pch_gbe_reset(adapter); + pch_gbe_clean_tx_ring(adapter, adapter->tx_ring); + pch_gbe_clean_rx_ring(adapter, adapter->rx_ring); + + pci_free_consistent(adapter->pdev, rx_ring->rx_buff_pool_size, + rx_ring->rx_buff_pool, rx_ring->rx_buff_pool_logic); + rx_ring->rx_buff_pool_logic = 0; + rx_ring->rx_buff_pool_size = 0; + rx_ring->rx_buff_pool = NULL; +} + +/** + * pch_gbe_sw_init - Initialize general software structures (struct pch_gbe_adapter) + * @adapter: Board private structure to initialize + * Returns + * 0: Successfully + * Negative value: Failed + */ +static int pch_gbe_sw_init(struct pch_gbe_adapter *adapter) +{ + struct pch_gbe_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + + adapter->rx_buffer_len = PCH_GBE_FRAME_SIZE_2048; + hw->mac.max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; + hw->mac.min_frame_size = ETH_ZLEN + ETH_FCS_LEN; + + /* Initialize the hardware-specific values */ + if (pch_gbe_hal_setup_init_funcs(hw)) { + pr_err("Hardware Initialization Failure\n"); + return -EIO; + } + if (pch_gbe_alloc_queues(adapter)) { + pr_err("Unable to allocate memory for queues\n"); + return -ENOMEM; + } + spin_lock_init(&adapter->hw.miim_lock); + spin_lock_init(&adapter->tx_queue_lock); + spin_lock_init(&adapter->stats_lock); + spin_lock_init(&adapter->ethtool_lock); + atomic_set(&adapter->irq_sem, 0); + pch_gbe_irq_disable(adapter); + + pch_gbe_init_stats(adapter); + + pr_debug("rx_buffer_len : %d mac.min_frame_size : %d mac.max_frame_size : %d\n", + (u32) adapter->rx_buffer_len, + hw->mac.min_frame_size, hw->mac.max_frame_size); + return 0; +} + +/** + * pch_gbe_open - Called when a network interface is made active + * @netdev: Network interface device structure + * Returns + * 0: Successfully + * Negative value: Failed + */ +static int pch_gbe_open(struct net_device *netdev) +{ + struct pch_gbe_adapter *adapter = netdev_priv(netdev); + struct pch_gbe_hw *hw = &adapter->hw; + int err; + + /* allocate transmit descriptors */ + err = pch_gbe_setup_tx_resources(adapter, adapter->tx_ring); + if (err) + goto err_setup_tx; + /* allocate receive descriptors */ + err = pch_gbe_setup_rx_resources(adapter, adapter->rx_ring); + if (err) + goto err_setup_rx; + pch_gbe_hal_power_up_phy(hw); + err = pch_gbe_up(adapter); + if (err) + goto err_up; + pr_debug("Success End\n"); + return 0; + +err_up: + if (!adapter->wake_up_evt) + pch_gbe_hal_power_down_phy(hw); + pch_gbe_free_rx_resources(adapter, adapter->rx_ring); +err_setup_rx: + pch_gbe_free_tx_resources(adapter, adapter->tx_ring); +err_setup_tx: + pch_gbe_reset(adapter); + pr_err("Error End\n"); + return err; +} + +/** + * pch_gbe_stop - Disables a network interface + * @netdev: Network interface device structure + * Returns + * 0: Successfully + */ +static int pch_gbe_stop(struct net_device *netdev) +{ + struct pch_gbe_adapter *adapter = netdev_priv(netdev); + struct pch_gbe_hw *hw = &adapter->hw; + + pch_gbe_down(adapter); + if (!adapter->wake_up_evt) + pch_gbe_hal_power_down_phy(hw); + pch_gbe_free_tx_resources(adapter, adapter->tx_ring); + pch_gbe_free_rx_resources(adapter, adapter->rx_ring); + return 0; +} + +/** + * pch_gbe_xmit_frame - Packet transmitting start + * @skb: Socket buffer structure + * @netdev: Network interface device structure + * Returns + * - NETDEV_TX_OK: Normal end + * - NETDEV_TX_BUSY: Error end + */ +static int pch_gbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev) +{ + struct pch_gbe_adapter *adapter = netdev_priv(netdev); + struct pch_gbe_tx_ring *tx_ring = adapter->tx_ring; + unsigned long flags; + + if (unlikely(skb->len > (adapter->hw.mac.max_frame_size - 4))) { + pr_err("Transfer length Error: skb len: %d > max: %d\n", + skb->len, adapter->hw.mac.max_frame_size); + dev_kfree_skb_any(skb); + adapter->stats.tx_length_errors++; + return NETDEV_TX_OK; + } + if (!spin_trylock_irqsave(&tx_ring->tx_lock, flags)) { + /* Collision - tell upper layer to requeue */ + return NETDEV_TX_LOCKED; + } + if (unlikely(!PCH_GBE_DESC_UNUSED(tx_ring))) { + netif_stop_queue(netdev); + spin_unlock_irqrestore(&tx_ring->tx_lock, flags); + pr_debug("Return : BUSY next_to use : 0x%08x next_to clean : 0x%08x\n", + tx_ring->next_to_use, tx_ring->next_to_clean); + return NETDEV_TX_BUSY; + } + spin_unlock_irqrestore(&tx_ring->tx_lock, flags); + + /* CRC,ITAG no support */ + pch_gbe_tx_queue(adapter, tx_ring, skb); + return NETDEV_TX_OK; +} + +/** + * pch_gbe_get_stats - Get System Network Statistics + * @netdev: Network interface device structure + * Returns: The current stats + */ +static struct net_device_stats *pch_gbe_get_stats(struct net_device *netdev) +{ + /* only return the current stats */ + return &netdev->stats; +} + +/** + * pch_gbe_set_multi - Multicast and Promiscuous mode set + * @netdev: Network interface device structure + */ +static void pch_gbe_set_multi(struct net_device *netdev) +{ + struct pch_gbe_adapter *adapter = netdev_priv(netdev); + struct pch_gbe_hw *hw = &adapter->hw; + struct netdev_hw_addr *ha; + u8 *mta_list; + u32 rctl; + int i; + int mc_count; + + pr_debug("netdev->flags : 0x%08x\n", netdev->flags); + + /* Check for Promiscuous and All Multicast modes */ + rctl = ioread32(&hw->reg->RX_MODE); + mc_count = netdev_mc_count(netdev); + if ((netdev->flags & IFF_PROMISC)) { + rctl &= ~PCH_GBE_ADD_FIL_EN; + rctl &= ~PCH_GBE_MLT_FIL_EN; + } else if ((netdev->flags & IFF_ALLMULTI)) { + /* all the multicasting receive permissions */ + rctl |= PCH_GBE_ADD_FIL_EN; + rctl &= ~PCH_GBE_MLT_FIL_EN; + } else { + if (mc_count >= PCH_GBE_MAR_ENTRIES) { + /* all the multicasting receive permissions */ + rctl |= PCH_GBE_ADD_FIL_EN; + rctl &= ~PCH_GBE_MLT_FIL_EN; + } else { + rctl |= (PCH_GBE_ADD_FIL_EN | PCH_GBE_MLT_FIL_EN); + } + } + iowrite32(rctl, &hw->reg->RX_MODE); + + if (mc_count >= PCH_GBE_MAR_ENTRIES) + return; + mta_list = kmalloc(mc_count * ETH_ALEN, GFP_ATOMIC); + if (!mta_list) + return; + + /* The shared function expects a packed array of only addresses. */ + i = 0; + netdev_for_each_mc_addr(ha, netdev) { + if (i == mc_count) + break; + memcpy(mta_list + (i++ * ETH_ALEN), &ha->addr, ETH_ALEN); + } + pch_gbe_mac_mc_addr_list_update(hw, mta_list, i, 1, + PCH_GBE_MAR_ENTRIES); + kfree(mta_list); + + pr_debug("RX_MODE reg(check bit31,30 ADD,MLT) : 0x%08x netdev->mc_count : 0x%08x\n", + ioread32(&hw->reg->RX_MODE), mc_count); +} + +/** + * pch_gbe_set_mac - Change the Ethernet Address of the NIC + * @netdev: Network interface device structure + * @addr: Pointer to an address structure + * Returns + * 0: Successfully + * -EADDRNOTAVAIL: Failed + */ +static int pch_gbe_set_mac(struct net_device *netdev, void *addr) +{ + struct pch_gbe_adapter *adapter = netdev_priv(netdev); + struct sockaddr *skaddr = addr; + int ret_val; + + if (!is_valid_ether_addr(skaddr->sa_data)) { + ret_val = -EADDRNOTAVAIL; + } else { + memcpy(netdev->dev_addr, skaddr->sa_data, netdev->addr_len); + memcpy(adapter->hw.mac.addr, skaddr->sa_data, netdev->addr_len); + pch_gbe_mac_mar_set(&adapter->hw, adapter->hw.mac.addr, 0); + ret_val = 0; + } + pr_debug("ret_val : 0x%08x\n", ret_val); + pr_debug("dev_addr : %pM\n", netdev->dev_addr); + pr_debug("mac_addr : %pM\n", adapter->hw.mac.addr); + pr_debug("MAC_ADR1AB reg : 0x%08x 0x%08x\n", + ioread32(&adapter->hw.reg->mac_adr[0].high), + ioread32(&adapter->hw.reg->mac_adr[0].low)); + return ret_val; +} + +/** + * pch_gbe_change_mtu - Change the Maximum Transfer Unit + * @netdev: Network interface device structure + * @new_mtu: New value for maximum frame size + * Returns + * 0: Successfully + * -EINVAL: Failed + */ +static int pch_gbe_change_mtu(struct net_device *netdev, int new_mtu) +{ + struct pch_gbe_adapter *adapter = netdev_priv(netdev); + int max_frame; + unsigned long old_rx_buffer_len = adapter->rx_buffer_len; + int err; + + max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; + if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || + (max_frame > PCH_GBE_MAX_JUMBO_FRAME_SIZE)) { + pr_err("Invalid MTU setting\n"); + return -EINVAL; + } + if (max_frame <= PCH_GBE_FRAME_SIZE_2048) + adapter->rx_buffer_len = PCH_GBE_FRAME_SIZE_2048; + else if (max_frame <= PCH_GBE_FRAME_SIZE_4096) + adapter->rx_buffer_len = PCH_GBE_FRAME_SIZE_4096; + else if (max_frame <= PCH_GBE_FRAME_SIZE_8192) + adapter->rx_buffer_len = PCH_GBE_FRAME_SIZE_8192; + else + adapter->rx_buffer_len = PCH_GBE_MAX_RX_BUFFER_SIZE; + + if (netif_running(netdev)) { + pch_gbe_down(adapter); + err = pch_gbe_up(adapter); + if (err) { + adapter->rx_buffer_len = old_rx_buffer_len; + pch_gbe_up(adapter); + return -ENOMEM; + } else { + netdev->mtu = new_mtu; + adapter->hw.mac.max_frame_size = max_frame; + } + } else { + pch_gbe_reset(adapter); + netdev->mtu = new_mtu; + adapter->hw.mac.max_frame_size = max_frame; + } + + pr_debug("max_frame : %d rx_buffer_len : %d mtu : %d max_frame_size : %d\n", + max_frame, (u32) adapter->rx_buffer_len, netdev->mtu, + adapter->hw.mac.max_frame_size); + return 0; +} + +/** + * pch_gbe_set_features - Reset device after features changed + * @netdev: Network interface device structure + * @features: New features + * Returns + * 0: HW state updated successfully + */ +static int pch_gbe_set_features(struct net_device *netdev, u32 features) +{ + struct pch_gbe_adapter *adapter = netdev_priv(netdev); + u32 changed = features ^ netdev->features; + + if (!(changed & NETIF_F_RXCSUM)) + return 0; + + if (netif_running(netdev)) + pch_gbe_reinit_locked(adapter); + else + pch_gbe_reset(adapter); + + return 0; +} + +/** + * pch_gbe_ioctl - Controls register through a MII interface + * @netdev: Network interface device structure + * @ifr: Pointer to ifr structure + * @cmd: Control command + * Returns + * 0: Successfully + * Negative value: Failed + */ +static int pch_gbe_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + struct pch_gbe_adapter *adapter = netdev_priv(netdev); + + pr_debug("cmd : 0x%04x\n", cmd); + + return generic_mii_ioctl(&adapter->mii, if_mii(ifr), cmd, NULL); +} + +/** + * pch_gbe_tx_timeout - Respond to a Tx Hang + * @netdev: Network interface device structure + */ +static void pch_gbe_tx_timeout(struct net_device *netdev) +{ + struct pch_gbe_adapter *adapter = netdev_priv(netdev); + + /* Do the reset outside of interrupt context */ + adapter->stats.tx_timeout_count++; + schedule_work(&adapter->reset_task); +} + +/** + * pch_gbe_napi_poll - NAPI receive and transfer polling callback + * @napi: Pointer of polling device struct + * @budget: The maximum number of a packet + * Returns + * false: Exit the polling mode + * true: Continue the polling mode + */ +static int pch_gbe_napi_poll(struct napi_struct *napi, int budget) +{ + struct pch_gbe_adapter *adapter = + container_of(napi, struct pch_gbe_adapter, napi); - struct net_device *netdev = adapter->netdev; + int work_done = 0; + bool poll_end_flag = false; + bool cleaned = false; + u32 int_en; + + pr_debug("budget : %d\n", budget); + - /* Keep link state information with original netdev */ - if (!netif_carrier_ok(netdev)) { ++ pch_gbe_clean_rx(adapter, adapter->rx_ring, &work_done, budget); ++ cleaned = pch_gbe_clean_tx(adapter, adapter->tx_ring); ++ ++ if (!cleaned) ++ work_done = budget; ++ /* If no Tx and not enough Rx work done, ++ * exit the polling mode ++ */ ++ if (work_done < budget) + poll_end_flag = true; - } else { - pch_gbe_clean_rx(adapter, adapter->rx_ring, &work_done, budget); ++ ++ if (poll_end_flag) { ++ napi_complete(napi); ++ if (adapter->rx_stop_flag) { ++ adapter->rx_stop_flag = false; ++ pch_gbe_start_receive(&adapter->hw); ++ } ++ pch_gbe_irq_enable(adapter); ++ } else + if (adapter->rx_stop_flag) { + adapter->rx_stop_flag = false; + pch_gbe_start_receive(&adapter->hw); + int_en = ioread32(&adapter->hw.reg->INT_EN); + iowrite32((int_en | PCH_GBE_INT_RX_FIFO_ERR), - &adapter->hw.reg->INT_EN); ++ &adapter->hw.reg->INT_EN); + } - cleaned = pch_gbe_clean_tx(adapter, adapter->tx_ring); - - if (cleaned) - work_done = budget; - /* If no Tx and not enough Rx work done, - * exit the polling mode - */ - if ((work_done < budget) || !netif_running(netdev)) - poll_end_flag = true; - } - - if (poll_end_flag) { - napi_complete(napi); - pch_gbe_irq_enable(adapter); - } + + pr_debug("poll_end_flag : %d work_done : %d budget : %d\n", + poll_end_flag, work_done, budget); + + return work_done; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/** + * pch_gbe_netpoll - Used by things like netconsole to send skbs + * @netdev: Network interface device structure + */ +static void pch_gbe_netpoll(struct net_device *netdev) +{ + struct pch_gbe_adapter *adapter = netdev_priv(netdev); + + disable_irq(adapter->pdev->irq); + pch_gbe_intr(adapter->pdev->irq, netdev); + enable_irq(adapter->pdev->irq); +} +#endif + +static const struct net_device_ops pch_gbe_netdev_ops = { + .ndo_open = pch_gbe_open, + .ndo_stop = pch_gbe_stop, + .ndo_start_xmit = pch_gbe_xmit_frame, + .ndo_get_stats = pch_gbe_get_stats, + .ndo_set_mac_address = pch_gbe_set_mac, + .ndo_tx_timeout = pch_gbe_tx_timeout, + .ndo_change_mtu = pch_gbe_change_mtu, + .ndo_set_features = pch_gbe_set_features, + .ndo_do_ioctl = pch_gbe_ioctl, + .ndo_set_rx_mode = pch_gbe_set_multi, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = pch_gbe_netpoll, +#endif +}; + +static pci_ers_result_t pch_gbe_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct pch_gbe_adapter *adapter = netdev_priv(netdev); + + netif_device_detach(netdev); + if (netif_running(netdev)) + pch_gbe_down(adapter); + pci_disable_device(pdev); + /* Request a slot slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +static pci_ers_result_t pch_gbe_io_slot_reset(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct pch_gbe_adapter *adapter = netdev_priv(netdev); + struct pch_gbe_hw *hw = &adapter->hw; + + if (pci_enable_device(pdev)) { + pr_err("Cannot re-enable PCI device after reset\n"); + return PCI_ERS_RESULT_DISCONNECT; + } + pci_set_master(pdev); + pci_enable_wake(pdev, PCI_D0, 0); + pch_gbe_hal_power_up_phy(hw); + pch_gbe_reset(adapter); + /* Clear wake up status */ + pch_gbe_mac_set_wol_event(hw, 0); + + return PCI_ERS_RESULT_RECOVERED; +} + +static void pch_gbe_io_resume(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct pch_gbe_adapter *adapter = netdev_priv(netdev); + + if (netif_running(netdev)) { + if (pch_gbe_up(adapter)) { + pr_debug("can't bring device back up after reset\n"); + return; + } + } + netif_device_attach(netdev); +} + +static int __pch_gbe_suspend(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct pch_gbe_adapter *adapter = netdev_priv(netdev); + struct pch_gbe_hw *hw = &adapter->hw; + u32 wufc = adapter->wake_up_evt; + int retval = 0; + + netif_device_detach(netdev); + if (netif_running(netdev)) + pch_gbe_down(adapter); + if (wufc) { + pch_gbe_set_multi(netdev); + pch_gbe_setup_rctl(adapter); + pch_gbe_configure_rx(adapter); + pch_gbe_set_rgmii_ctrl(adapter, hw->mac.link_speed, + hw->mac.link_duplex); + pch_gbe_set_mode(adapter, hw->mac.link_speed, + hw->mac.link_duplex); + pch_gbe_mac_set_wol_event(hw, wufc); + pci_disable_device(pdev); + } else { + pch_gbe_hal_power_down_phy(hw); + pch_gbe_mac_set_wol_event(hw, wufc); + pci_disable_device(pdev); + } + return retval; +} + +#ifdef CONFIG_PM +static int pch_gbe_suspend(struct device *device) +{ + struct pci_dev *pdev = to_pci_dev(device); + + return __pch_gbe_suspend(pdev); +} + +static int pch_gbe_resume(struct device *device) +{ + struct pci_dev *pdev = to_pci_dev(device); + struct net_device *netdev = pci_get_drvdata(pdev); + struct pch_gbe_adapter *adapter = netdev_priv(netdev); + struct pch_gbe_hw *hw = &adapter->hw; + u32 err; + + err = pci_enable_device(pdev); + if (err) { + pr_err("Cannot enable PCI device from suspend\n"); + return err; + } + pci_set_master(pdev); + pch_gbe_hal_power_up_phy(hw); + pch_gbe_reset(adapter); + /* Clear wake on lan control and status */ + pch_gbe_mac_set_wol_event(hw, 0); + + if (netif_running(netdev)) + pch_gbe_up(adapter); + netif_device_attach(netdev); + + return 0; +} +#endif /* CONFIG_PM */ + +static void pch_gbe_shutdown(struct pci_dev *pdev) +{ + __pch_gbe_suspend(pdev); + if (system_state == SYSTEM_POWER_OFF) { + pci_wake_from_d3(pdev, true); + pci_set_power_state(pdev, PCI_D3hot); + } +} + +static void pch_gbe_remove(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct pch_gbe_adapter *adapter = netdev_priv(netdev); + + cancel_work_sync(&adapter->reset_task); + unregister_netdev(netdev); + + pch_gbe_hal_phy_hw_reset(&adapter->hw); + + kfree(adapter->tx_ring); + kfree(adapter->rx_ring); + + iounmap(adapter->hw.reg); + pci_release_regions(pdev); + free_netdev(netdev); + pci_disable_device(pdev); +} + +static int pch_gbe_probe(struct pci_dev *pdev, + const struct pci_device_id *pci_id) +{ + struct net_device *netdev; + struct pch_gbe_adapter *adapter; + int ret; + + ret = pci_enable_device(pdev); + if (ret) + return ret; + + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) + || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) { + ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (ret) { + ret = pci_set_consistent_dma_mask(pdev, + DMA_BIT_MASK(32)); + if (ret) { + dev_err(&pdev->dev, "ERR: No usable DMA " + "configuration, aborting\n"); + goto err_disable_device; + } + } + } + + ret = pci_request_regions(pdev, KBUILD_MODNAME); + if (ret) { + dev_err(&pdev->dev, + "ERR: Can't reserve PCI I/O and memory resources\n"); + goto err_disable_device; + } + pci_set_master(pdev); + + netdev = alloc_etherdev((int)sizeof(struct pch_gbe_adapter)); + if (!netdev) { + ret = -ENOMEM; + dev_err(&pdev->dev, + "ERR: Can't allocate and set up an Ethernet device\n"); + goto err_release_pci; + } + SET_NETDEV_DEV(netdev, &pdev->dev); + + pci_set_drvdata(pdev, netdev); + adapter = netdev_priv(netdev); + adapter->netdev = netdev; + adapter->pdev = pdev; + adapter->hw.back = adapter; + adapter->hw.reg = pci_iomap(pdev, PCH_GBE_PCI_BAR, 0); + if (!adapter->hw.reg) { + ret = -EIO; + dev_err(&pdev->dev, "Can't ioremap\n"); + goto err_free_netdev; + } + + netdev->netdev_ops = &pch_gbe_netdev_ops; + netdev->watchdog_timeo = PCH_GBE_WATCHDOG_PERIOD; + netif_napi_add(netdev, &adapter->napi, + pch_gbe_napi_poll, PCH_GBE_RX_WEIGHT); + netdev->hw_features = NETIF_F_RXCSUM | + NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; + netdev->features = netdev->hw_features; + pch_gbe_set_ethtool_ops(netdev); + + pch_gbe_mac_load_mac_addr(&adapter->hw); + pch_gbe_mac_reset_hw(&adapter->hw); + + /* setup the private structure */ + ret = pch_gbe_sw_init(adapter); + if (ret) + goto err_iounmap; + + /* Initialize PHY */ + ret = pch_gbe_init_phy(adapter); + if (ret) { + dev_err(&pdev->dev, "PHY initialize error\n"); + goto err_free_adapter; + } + pch_gbe_hal_get_bus_info(&adapter->hw); + + /* Read the MAC address. and store to the private data */ + ret = pch_gbe_hal_read_mac_addr(&adapter->hw); + if (ret) { + dev_err(&pdev->dev, "MAC address Read Error\n"); + goto err_free_adapter; + } + + memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len); + if (!is_valid_ether_addr(netdev->dev_addr)) { + dev_err(&pdev->dev, "Invalid MAC Address\n"); + ret = -EIO; + goto err_free_adapter; + } + setup_timer(&adapter->watchdog_timer, pch_gbe_watchdog, + (unsigned long)adapter); + + INIT_WORK(&adapter->reset_task, pch_gbe_reset_task); + + pch_gbe_check_options(adapter); + + /* initialize the wol settings based on the eeprom settings */ + adapter->wake_up_evt = PCH_GBE_WL_INIT_SETTING; + dev_info(&pdev->dev, "MAC address : %pM\n", netdev->dev_addr); + + /* reset the hardware with the new settings */ + pch_gbe_reset(adapter); + + ret = register_netdev(netdev); + if (ret) + goto err_free_adapter; + /* tell the stack to leave us alone until pch_gbe_open() is called */ + netif_carrier_off(netdev); + netif_stop_queue(netdev); + + dev_dbg(&pdev->dev, "OKIsemi(R) PCH Network Connection\n"); + + device_set_wakeup_enable(&pdev->dev, 1); + return 0; + +err_free_adapter: + pch_gbe_hal_phy_hw_reset(&adapter->hw); + kfree(adapter->tx_ring); + kfree(adapter->rx_ring); +err_iounmap: + iounmap(adapter->hw.reg); +err_free_netdev: + free_netdev(netdev); +err_release_pci: + pci_release_regions(pdev); +err_disable_device: + pci_disable_device(pdev); + return ret; +} + +static DEFINE_PCI_DEVICE_TABLE(pch_gbe_pcidev_id) = { + {.vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_IOH1_GBE, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .class = (PCI_CLASS_NETWORK_ETHERNET << 8), + .class_mask = (0xFFFF00) + }, + {.vendor = PCI_VENDOR_ID_ROHM, + .device = PCI_DEVICE_ID_ROHM_ML7223_GBE, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .class = (PCI_CLASS_NETWORK_ETHERNET << 8), + .class_mask = (0xFFFF00) + }, + {.vendor = PCI_VENDOR_ID_ROHM, + .device = PCI_DEVICE_ID_ROHM_ML7831_GBE, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .class = (PCI_CLASS_NETWORK_ETHERNET << 8), + .class_mask = (0xFFFF00) + }, + /* required last entry */ + {0} +}; + +#ifdef CONFIG_PM +static const struct dev_pm_ops pch_gbe_pm_ops = { + .suspend = pch_gbe_suspend, + .resume = pch_gbe_resume, + .freeze = pch_gbe_suspend, + .thaw = pch_gbe_resume, + .poweroff = pch_gbe_suspend, + .restore = pch_gbe_resume, +}; +#endif + +static struct pci_error_handlers pch_gbe_err_handler = { + .error_detected = pch_gbe_io_error_detected, + .slot_reset = pch_gbe_io_slot_reset, + .resume = pch_gbe_io_resume +}; + +static struct pci_driver pch_gbe_driver = { + .name = KBUILD_MODNAME, + .id_table = pch_gbe_pcidev_id, + .probe = pch_gbe_probe, + .remove = pch_gbe_remove, +#ifdef CONFIG_PM + .driver.pm = &pch_gbe_pm_ops, +#endif + .shutdown = pch_gbe_shutdown, + .err_handler = &pch_gbe_err_handler +}; + + +static int __init pch_gbe_init_module(void) +{ + int ret; + + ret = pci_register_driver(&pch_gbe_driver); + if (copybreak != PCH_GBE_COPYBREAK_DEFAULT) { + if (copybreak == 0) { + pr_info("copybreak disabled\n"); + } else { + pr_info("copybreak enabled for packets <= %u bytes\n", + copybreak); + } + } + return ret; +} + +static void __exit pch_gbe_exit_module(void) +{ + pci_unregister_driver(&pch_gbe_driver); +} + +module_init(pch_gbe_init_module); +module_exit(pch_gbe_exit_module); + +MODULE_DESCRIPTION("EG20T PCH Gigabit ethernet Driver"); +MODULE_AUTHOR("OKI SEMICONDUCTOR, "); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); +MODULE_DEVICE_TABLE(pci, pch_gbe_pcidev_id); + +module_param(copybreak, uint, 0644); +MODULE_PARM_DESC(copybreak, + "Maximum size of packet that is copied to a new buffer on receive"); + +/* pch_gbe_main.c */ diff --cc net/batman-adv/soft-interface.c index aceeabc2ca86,05dd35114a27..f9cc95728989 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@@ -596,12 -595,11 +596,12 @@@ static int interface_tx(struct sk_buff goto dropped; /* Register the client MAC in the transtable */ - tt_local_add(soft_iface, ethhdr->h_source); + tt_local_add(soft_iface, ethhdr->h_source, skb->skb_iif); - orig_node = transtable_search(bat_priv, ethhdr->h_dest); + orig_node = transtable_search(bat_priv, ethhdr->h_source, + ethhdr->h_dest); - if (is_multicast_ether_addr(ethhdr->h_dest) || - (orig_node && orig_node->gw_flags)) { + do_bcast = is_multicast_ether_addr(ethhdr->h_dest); - if (do_bcast || (orig_node && orig_node->gw_flags)) { ++ if (do_bcast || (orig_node && orig_node->gw_flags)) { ret = gw_is_target(bat_priv, skb, orig_node); if (ret < 0)