From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 20 Jul 2011 16:05:13 +0000 (+0100)
Subject: mfd: Acknowlege all WM831x IRQs before we handle them
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=88c939770db375244b00ba92e901fa92677a7164;p=openwrt%2Fstaging%2Fblogic.git

mfd: Acknowlege all WM831x IRQs before we handle them

Ensure that we never have a window where we've handled an interrupt (and
therefore need to be notified of new events) but haven't yet told the
interrupt controller that this is the case (so any new events will be
discarded).

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
---

diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c
index 6c3408ca2c2d..ada1835a5455 100644
--- a/drivers/mfd/wm831x-irq.c
+++ b/drivers/mfd/wm831x-irq.c
@@ -449,7 +449,7 @@ static irqreturn_t wm831x_irq_thread(int irq, void *data)
 {
 	struct wm831x *wm831x = data;
 	unsigned int i;
-	int primary;
+	int primary, status_addr;
 	int status_regs[WM831X_NUM_IRQ_REGS] = { 0 };
 	int read[WM831X_NUM_IRQ_REGS] = { 0 };
 	int *status;
@@ -484,8 +484,9 @@ static irqreturn_t wm831x_irq_thread(int irq, void *data)
 		/* Hopefully there should only be one register to read
 		 * each time otherwise we ought to do a block read. */
 		if (!read[offset]) {
-			*status = wm831x_reg_read(wm831x,
-				     irq_data_to_status_reg(&wm831x_irqs[i]));
+			status_addr = irq_data_to_status_reg(&wm831x_irqs[i]);
+
+			*status = wm831x_reg_read(wm831x, status_addr);
 			if (*status < 0) {
 				dev_err(wm831x->dev,
 					"Failed to read IRQ status: %d\n",
@@ -494,26 +495,21 @@ static irqreturn_t wm831x_irq_thread(int irq, void *data)
 			}
 
 			read[offset] = 1;
+
+			/* Ignore any bits that we don't think are masked */
+			*status &= ~wm831x->irq_masks_cur[offset];
+
+			/* Acknowledge now so we don't miss
+			 * notifications while we handle.
+			 */
+			wm831x_reg_write(wm831x, status_addr, *status);
 		}
 
-		/* Report it if it isn't masked, or forget the status. */
-		if ((*status & ~wm831x->irq_masks_cur[offset])
-		    & wm831x_irqs[i].mask)
+		if (*status & wm831x_irqs[i].mask)
 			handle_nested_irq(wm831x->irq_base + i);
-		else
-			*status &= ~wm831x_irqs[i].mask;
 	}
 
 out:
-	/* Touchscreen interrupts are handled specially in the driver */
-	status_regs[0] &= ~(WM831X_TCHDATA_EINT | WM831X_TCHPD_EINT);
-
-	for (i = 0; i < ARRAY_SIZE(status_regs); i++) {
-		if (status_regs[i])
-			wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_1 + i,
-					 status_regs[i]);
-	}
-
 	return IRQ_HANDLED;
 }