From: Abhilash Kesavan Date: Thu, 28 Aug 2014 13:18:53 +0000 (+0530) Subject: mmc: dw_mmc: exynos: Add support for exynos7 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=89ad2be75a4287126f9f5473ecf167bd9b91093d;p=openwrt%2Fstaging%2Fblogic.git mmc: dw_mmc: exynos: Add support for exynos7 The Exynos7 has a DWMMC controller (v2.70a) which is different from prior versions. This patch adds new compatible strings for exynos7. This patch also fixes the CLKSEL register offset on exynos7. Signed-off-by: Abhilash Kesavan Signed-off-by: Yuvaraj Kumar C D Tested-by: Vivek Gautam Acked-by: Jaehoon Chung Signed-off-by: Ulf Hansson --- diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index 6cd3525d0e09..ee4fc0576c7d 100644 --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt @@ -18,6 +18,10 @@ Required Properties: specific extensions. - "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420 specific extensions. + - "samsung,exynos7-dw-mshc": for controllers with Samsung Exynos7 + specific extensions. + - "samsung,exynos7-dw-mshc-smu": for controllers with Samsung Exynos7 + specific extensions having an SMU. * samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface unit (ciu) clock. This property is applicable only for Exynos5 SoC's and diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c index 0fbc53ac7eae..509365cb22c6 100644 --- a/drivers/mmc/host/dw_mmc-exynos.c +++ b/drivers/mmc/host/dw_mmc-exynos.c @@ -25,6 +25,7 @@ #define NUM_PINS(x) (x + 2) #define SDMMC_CLKSEL 0x09C +#define SDMMC_CLKSEL64 0x0A8 #define SDMMC_CLKSEL_CCLK_SAMPLE(x) (((x) & 7) << 0) #define SDMMC_CLKSEL_CCLK_DRIVE(x) (((x) & 7) << 16) #define SDMMC_CLKSEL_CCLK_DIVIDER(x) (((x) & 7) << 24) @@ -65,6 +66,8 @@ enum dw_mci_exynos_type { DW_MCI_TYPE_EXYNOS5250, DW_MCI_TYPE_EXYNOS5420, DW_MCI_TYPE_EXYNOS5420_SMU, + DW_MCI_TYPE_EXYNOS7, + DW_MCI_TYPE_EXYNOS7_SMU, }; /* Exynos implementation specific driver private data */ @@ -95,6 +98,12 @@ static struct dw_mci_exynos_compatible { }, { .compatible = "samsung,exynos5420-dw-mshc-smu", .ctrl_type = DW_MCI_TYPE_EXYNOS5420_SMU, + }, { + .compatible = "samsung,exynos7-dw-mshc", + .ctrl_type = DW_MCI_TYPE_EXYNOS7, + }, { + .compatible = "samsung,exynos7-dw-mshc-smu", + .ctrl_type = DW_MCI_TYPE_EXYNOS7_SMU, }, }; @@ -102,7 +111,8 @@ static int dw_mci_exynos_priv_init(struct dw_mci *host) { struct dw_mci_exynos_priv_data *priv = host->priv; - if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS5420_SMU) { + if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS5420_SMU || + priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) { mci_writel(host, MPSBEGIN0, 0); mci_writel(host, MPSEND0, DWMCI_BLOCK_NUM); mci_writel(host, MPSCTRL0, DWMCI_MPSCTRL_SECURE_WRITE_BIT | @@ -153,11 +163,22 @@ static int dw_mci_exynos_resume(struct device *dev) static int dw_mci_exynos_resume_noirq(struct device *dev) { struct dw_mci *host = dev_get_drvdata(dev); + struct dw_mci_exynos_priv_data *priv = host->priv; u32 clksel; - clksel = mci_readl(host, CLKSEL); - if (clksel & SDMMC_CLKSEL_WAKEUP_INT) - mci_writel(host, CLKSEL, clksel); + if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || + priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) + clksel = mci_readl(host, CLKSEL64); + else + clksel = mci_readl(host, CLKSEL); + + if (clksel & SDMMC_CLKSEL_WAKEUP_INT) { + if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || + priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) + mci_writel(host, CLKSEL64, clksel); + else + mci_writel(host, CLKSEL, clksel); + } return 0; } @@ -169,6 +190,7 @@ static int dw_mci_exynos_resume_noirq(struct device *dev) static void dw_mci_exynos_prepare_command(struct dw_mci *host, u32 *cmdr) { + struct dw_mci_exynos_priv_data *priv = host->priv; /* * Exynos4412 and Exynos5250 extends the use of CMD register with the * use of bit 29 (which is reserved on standard MSHC controllers) for @@ -176,8 +198,14 @@ static void dw_mci_exynos_prepare_command(struct dw_mci *host, u32 *cmdr) * HOLD register should be bypassed in case there is no phase shift * applied on CMD/DATA that is sent to the card. */ - if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL))) - *cmdr |= SDMMC_CMD_USE_HOLD_REG; + if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || + priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) { + if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL64))) + *cmdr |= SDMMC_CMD_USE_HOLD_REG; + } else { + if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL))) + *cmdr |= SDMMC_CMD_USE_HOLD_REG; + } } static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios) @@ -188,12 +216,20 @@ static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios) u8 div = priv->ciu_div + 1; if (ios->timing == MMC_TIMING_MMC_DDR52) { - mci_writel(host, CLKSEL, priv->ddr_timing); + if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || + priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) + mci_writel(host, CLKSEL64, priv->ddr_timing); + else + mci_writel(host, CLKSEL, priv->ddr_timing); /* Should be double rate for DDR mode */ if (ios->bus_width == MMC_BUS_WIDTH_8) wanted <<= 1; } else { - mci_writel(host, CLKSEL, priv->sdr_timing); + if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || + priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) + mci_writel(host, CLKSEL64, priv->sdr_timing); + else + mci_writel(host, CLKSEL, priv->sdr_timing); } /* Don't care if wanted clock is zero */ @@ -265,26 +301,51 @@ static int dw_mci_exynos_parse_dt(struct dw_mci *host) static inline u8 dw_mci_exynos_get_clksmpl(struct dw_mci *host) { - return SDMMC_CLKSEL_CCLK_SAMPLE(mci_readl(host, CLKSEL)); + struct dw_mci_exynos_priv_data *priv = host->priv; + + if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || + priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) + return SDMMC_CLKSEL_CCLK_SAMPLE(mci_readl(host, CLKSEL64)); + else + return SDMMC_CLKSEL_CCLK_SAMPLE(mci_readl(host, CLKSEL)); } static inline void dw_mci_exynos_set_clksmpl(struct dw_mci *host, u8 sample) { u32 clksel; - clksel = mci_readl(host, CLKSEL); + struct dw_mci_exynos_priv_data *priv = host->priv; + + if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || + priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) + clksel = mci_readl(host, CLKSEL64); + else + clksel = mci_readl(host, CLKSEL); clksel = (clksel & ~0x7) | SDMMC_CLKSEL_CCLK_SAMPLE(sample); - mci_writel(host, CLKSEL, clksel); + if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || + priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) + mci_writel(host, CLKSEL64, clksel); + else + mci_writel(host, CLKSEL, clksel); } static inline u8 dw_mci_exynos_move_next_clksmpl(struct dw_mci *host) { + struct dw_mci_exynos_priv_data *priv = host->priv; u32 clksel; u8 sample; - clksel = mci_readl(host, CLKSEL); + if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || + priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) + clksel = mci_readl(host, CLKSEL64); + else + clksel = mci_readl(host, CLKSEL); sample = (clksel + 1) & 0x7; clksel = (clksel & ~0x7) | sample; - mci_writel(host, CLKSEL, clksel); + if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || + priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) + mci_writel(host, CLKSEL64, clksel); + else + mci_writel(host, CLKSEL, clksel); return sample; } @@ -411,6 +472,10 @@ static const struct of_device_id dw_mci_exynos_match[] = { .data = &exynos_drv_data, }, { .compatible = "samsung,exynos5420-dw-mshc-smu", .data = &exynos_drv_data, }, + { .compatible = "samsung,exynos7-dw-mshc", + .data = &exynos_drv_data, }, + { .compatible = "samsung,exynos7-dw-mshc-smu", + .data = &exynos_drv_data, }, {}, }; MODULE_DEVICE_TABLE(of, dw_mci_exynos_match);