From: Mathias Kresin <dev@kresin.me>
Date: Thu, 26 May 2016 21:08:19 +0000 (+0200)
Subject: lantiq: VGV7519 - remove/merge redundant parts in dts
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=8a382f122136c8160c2dd606cd09c29d0603f0dc;p=openwrt%2Fstaging%2Fzorun.git

lantiq: VGV7519 - remove/merge redundant parts in dts

Signed-off-by: Mathias Kresin <dev@kresin.me>
---

diff --git a/target/linux/lantiq/dts/VGV7519.dtsi b/target/linux/lantiq/dts/VGV7519.dtsi
index 95de6e56e7..9313fdaacb 100644
--- a/target/linux/lantiq/dts/VGV7519.dtsi
+++ b/target/linux/lantiq/dts/VGV7519.dtsi
@@ -23,30 +23,32 @@
 	};
 	
 	fpi@10000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lantiq,fpi", "simple-bus";
-		ranges = <0x0 0x10000000 0xEEFFFFF>;
-		reg = <0x10000000 0xEF00000>;
-
 		localbus@0 {
-			#address-cells = <2>;
-			#size-cells = <1>;
-			compatible = "lantiq,localbus", "simple-bus";
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					boardconfig: partition@40000 {
+						label = "board_config";
+						reg = <0x40000 0x10000>;
+						read-only;
+					};
+				};
+			};
 		};
 
 		gpio: pinmux@E100B10 {
-			compatible = "lantiq,pinctrl-xr9";
 			pinctrl-names = "default";
 			pinctrl-0 = <&state_default>;
 
-			interrupt-parent = <&icu0>;
-			interrupts = <166 135 66 40 41 42 38>;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0xE100B10 0xA0>;
-
 			state_default: pinmux {
 				stp {
 					lantiq,groups = "stp";
@@ -109,19 +111,7 @@
 
 		pci@E105400 {
 			status = "okay";
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			compatible = "lantiq,pci-xway";
-			bus-range = <0x0 0x0>;
-			ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
-				0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
-			reg = <0x7000000 0x8000         /* config space */
-				0xE105400 0x400>;       /* pci bridge */
 			lantiq,bus-clock = <33333333>;
-			/*lantiq,external-clock;*/
-			lantiq,delay-hi = <0>; /* 0ns delay */
-			lantiq,delay-lo = <0>; /* 0.0ns delay */
 			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			interrupt-map = <
 				0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
@@ -278,6 +268,7 @@
 		reg = <1>;
 		mac-address = [ 00 11 22 33 44 56 ];
 		lantiq,wan;
+
 		ethernet@5 {
 			compatible = "lantiq,xrx200-pdi-port";
 			reg = <5>;
@@ -293,27 +284,22 @@
 		phy0: ethernet-phy@0 {
 			reg = <0x0>;
 			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-			lantiq,c45-reg-init = <1 0 0 0>;
 		};
 		phy1: ethernet-phy@1 {
 			reg = <0x1>;
 			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-			lantiq,c45-reg-init = <1 0 0 0>;
 		};
 		phy5: ethernet-phy@5 {
 			reg = <0x5>;
 			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-			lantiq,c45-reg-init = <1 0 0 0>;
 		};
 		phy11: ethernet-phy@11 {
 			reg = <0x11>;
 			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-			lantiq,c45-reg-init = <1 0 0 0>;
 		};
 		phy13: ethernet-phy@13 {
 			reg = <0x13>;
 			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-			lantiq,c45-reg-init = <1 0 0 0>;
 		};
 	};
 };
diff --git a/target/linux/lantiq/dts/VGV7519BRN.dts b/target/linux/lantiq/dts/VGV7519BRN.dts
index 4f56ba8974..cc365ecfe1 100644
--- a/target/linux/lantiq/dts/VGV7519BRN.dts
+++ b/target/linux/lantiq/dts/VGV7519BRN.dts
@@ -6,23 +6,8 @@
 / {
 	fpi@10000000 {
 		localbus@0 {
-			nor-flash@0 {
-				compatible = "lantiq,nor", "cfi-flash";
-				bank-width = <2>;
-				reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
+			nor-boot@0 {
 				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@40000 {
-						label = "board_config";
-						reg = <0x40000 0x10000>;
-						read-only;
-					};
 					partition@80000 {
 						label = "firmware";
 						reg = <0x80000 0x780000>;
diff --git a/target/linux/lantiq/dts/VGV7519NOR.dts b/target/linux/lantiq/dts/VGV7519NOR.dts
index 24a3d1666a..69b0a1f450 100644
--- a/target/linux/lantiq/dts/VGV7519NOR.dts
+++ b/target/linux/lantiq/dts/VGV7519NOR.dts
@@ -7,26 +7,11 @@
 	fpi@10000000 {
 		localbus@0 {
 			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
 				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
 					partition@0 {
 						label = "uboot";
 						reg = <0x00000 0x40000>;
 					};
-					partition@40000 {
-						label = "board_config";
-						reg = <0x40000 0x10000>;
-						read-only;
-					};
 					partition@60000 {
 						label = "uboot_env";
 						reg = <0x60000 0x10000>;
@@ -34,9 +19,6 @@
 					partition@80000 {
 						label = "firmware";
 						reg = <0x80000 0xf80000>;
-						// 0x080000 - 0x01b0000 : kernel
-						// 0x1b0000 - 0x1000000 : rootfs (squashfs)
-						// 0x390000 - 0x1000000 : rootfs_data
 					};
 				};
 			};