From: Johannes Berg Date: Fri, 17 May 2013 10:01:26 +0000 (+0200) Subject: iwlwifi: move D3_CFG_COMPLETE handling into DVM X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=8ade62857ef77bdf639185410fbcd811aa700cb2;p=openwrt%2Fstaging%2Fblogic.git iwlwifi: move D3_CFG_COMPLETE handling into DVM The MVM firmware doesn't communicate this way, it instead assumes D3 configuration is complete after a specific host command (which must be last) has been sent. Handling this bit thus belongs into the firmware API code, i.e. DVM. Signed-off-by: Johannes Berg Reviewed-by: Emmanuel Grumbach --- diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index cab23af0be9e..700215324af8 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -426,6 +426,10 @@ static int iwlagn_mac_suspend(struct ieee80211_hw *hw, if (ret) goto error; + /* let the ucode operate on its own */ + iwl_write32(priv->trans, CSR_UCODE_DRV_GP1_SET, + CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE); + iwl_trans_d3_suspend(priv->trans); goto out; @@ -509,6 +513,10 @@ static int iwlagn_mac_resume(struct ieee80211_hw *hw) goto out_unlock; } + /* uCode is no longer operating by itself */ + iwl_write32(priv->trans, CSR_UCODE_DRV_GP1_CLR, + CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE); + base = priv->device_pointers.error_event_table; if (!iwlagn_hw_valid_rtc_data_addr(base)) { IWL_WARN(priv, "Invalid error table during resume!\n"); diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index a785f49df9b1..0b021305eedf 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -580,10 +580,6 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans) static void iwl_trans_pcie_d3_suspend(struct iwl_trans *trans) { - /* let the ucode operate on its own */ - iwl_write32(trans, CSR_UCODE_DRV_GP1_SET, - CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE); - iwl_disable_interrupts(trans); iwl_pcie_disable_ict(trans); @@ -643,9 +639,6 @@ static int iwl_trans_pcie_d3_resume(struct iwl_trans *trans, return ret; } - iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE); - *status = IWL_D3_STATUS_ALIVE; return 0; }